Some NetStream statuses are not triggered anymore with FP 11.2

I'm in charge of developing a video recorder in as3 (http://hdfvr.com) and the video recorder has been working fine for the past 2 years however with the latest FP update (11.2) it has stopped working because these 3 NetStream events are never triggered anymore:
HDFVR.netStatusHandler(NetStream.Buffer.Empty) _state=uploading
HDFVR.netStatusHandler(NetStream.Record.Stop) _state=idle
HDFVR.netStatusHandler(NetStream.Unpublish.Success) _state=idle
This happens regardless of the media server used (Red5/FMIS/Wowza)
I have posted this issue in the Adobe Flash Player Bug Database:
https://bugbase.adobe.com/index.cfm?event=bug&id=3154124
I have also informed my clients and they're waiting for a fix, unfortunately I am not sure I can do a workaround without those NetStream events.

I've report the same problem using Flash Player 11.2.
From test that performed using Flash Player 11.3 beta 3 the issue seems to be solved, so I can handle NetStream.Buffer.Empty event correctly.
I'd like to ask your suggestion how is possibile workaround this problem until Flash Player 11.3 is not release as stable version.
Some users that use automatic update has Flash Player update to last stable release (11.2), I'd like to ask you suggestion how to correct manage this case.
I'd like to introduce some modification in the code for handle this case for example start a timer and monitor how many data are present in buffer, and when buffer is empty, use same function that should be called when NetStream.Buffer.Empty event is raised?
I'd kindly like to ask if you can give to me some suggestion.
Thank you very much
Maurizio

Similar Messages

After updating my iPod touch 3rd generation to IOS5 some default apps are not working (anymore)

Hi,
I updated my iPod touch 3g from IOS 4.x to IOS 5 last week and since then my iPod makes troublle!
First of all, during the update I did not see any Problems. After the update, I mean the step where the data will be restored to the iPod, I synchronized some APPS at the same time, maybe that was a big mistake. My iPod makes hard resets many times in a loop until it frozes.
So the only thing I could do here is pressing the home button and the power switch at the same time until it gets rebooted. The sync started again and it looked like everything runs fine.
As I tried to use iMessage first time I realised the first Problem: I am unable to loginto iMessage with my Apple ID. My Apple ID runs fine, I can by Apps and so on. I also enabled iCloud to see that my Apple ID is ok. But logging into iMessage I put in my Apple credentials and Password, click on next, wait 3 seconds and the screen flips back. So this feature is not working.
Next issue I see is that randomly my iPod hard resets itself. Even if I don't do anything with my iPod I can see that it resets itself, booting with the apple icon. This happens minimum three times a day... (Exception Type: EXC_BAD_ACCESS (SIGSEGV), Kern_INVALID_ADDRESSat 0x00000000)
Today I tried YouTube, an internal Application which I cannot reinstall. It's not working anymore, starting YouTube says: Unable to connect to YouTube!
I have no clue whats going on here because email and web is working fine.
In my eyes I would like to reset the whole device to a state before running IOS5 and I would try the update again. But my Question is how to reinstall IOS5?
If IOS5 will not run smoothly on my iPod, I would prefer to backref to iOS4x.
Is there anyone who could help me out here?
Thanks,
Daniel

Found the rootcause. The battery was damaged and unable to have enough power to keep the device alive. After changing the device problem is solved.

Font are not displayed anymore with Mavericks update, any idea ?

Imposible to have the correct fonts displayed with the last update.
Anyone has a solution ?
Thank you very much !
Henri

I'm using Bosque
the font disappears when I'm in preview mode on Ipad and on Ibook on Mac
it's OK on Ibook author
Note that before the update of Mavericks everything was perfectly OK.
Thanks a lot for your help !
Henri
See the capture bellow :

Hi! I have a problem with the adjustment brush some are not there anymore like soften skin, how i can fix that?

Hi! I have a problem with the adjustment brush some are not there anymore like soften skin, how i can fix that?

Hi dear,
it's funny, real funny.
I think the programmes have diffrent sound system from the normal calls system.
All you need to do is to turn the sound up from the bottom in the phone side in the time you're making or recieving the call.
you'll hear the sound.
I hope that would help.
All the best

Some employees designations are not matching with their actual designation

Hi All,
While downloading to excel sheet some employees designations are not matching with their actual designations maintained in infotye 0001.
Designations should match with infotype 0001.
How to rectifty this issue.
Let me know...
Regards,
Sita

Hi
Looks like you are dowloading the value from a field which does not contain the value you see in the infotype screen
In infotypr 0001 place your cursor in the designation field.
Press F1
See the name of the field & the table.
Have a look at the table using se16 and confirm what you see in the field is what you see in the infotype screen.
If it is same see in your code if you are using correct field.
If it is not the same trace in which table and field the value is stored and code your program to download from there.
Check in Tables HRP1000 and PA0001 and you should get your values
regards
Pravin

I have a macbook pro with OSX Mavericks 10.9.5 and some keys that are not working. Specifically, the enter/return button, the "p", "0", ";", and all the function keys. What's really weird is that happens randomly. I've never spilled anything on it

I have a macbook pro with OSX Mavericks 10.9.5 and some keys randomly are not working. Specifically, the enter/return button, the "p", "0", ";", and all the function keys. What's really weird is that happens randomly. I've never spilled anything on it, and I can't for the life of me figure out how to fix this. Can anyone help? of course this happened after my warranty expired.

**update**
I don't know if this will help someone but I am posting this for that purpose. In the past when I first had this problem, I'd read a post somewhere (sorry, long ago, don't have the link) where an individual was having the same problem and they stated that when the MBP got heated, that's when the keys would stop working, and they went into the MBP and jiggle some stuff around (a specific wire, I'm not electronically inclined so I know NOT of what they spake!). Well I didn't want to do that but it always stuck in the back of my mind. I had given up, really, and was planning to take my MBP to the apple store. But by chance one night I left my MBP on the floor where it's cool, and when I turned it on, the problem went - poof! It seems there was some validity to the post that spoke about heat, because my problems started when I would stream foreign dramas on my MBP for hours at night, and I would hear the fan going off all the time, and in the mornings, my "p", "enter", "0", ";", and all the function keys would stop working.
So, maybe try keeping the MBP in a cool place when it's off. Since I've started doing this overnight every night (keeping it on the cool floor, out of reach of any big feet), I have not had a single problem with my keyboard.
Hopefully this might help someone.

I just purchased Lightroom 5 back on 15th of February, and v6 is now available. Do I understand correctly that I have to buy the new version for $149.00? Free updates are not available/included with the purchase for some time after the purchase?

I just purchased Lightroom 5 back on 15th of February, and v6 is now available. Do I understand correctly that I have to buy the new version for $149.00? Free updates are not available/included with the purchase for some time after the purchase?

Do I understand correctly that I have to buy the new version for $149.00?
You can upgrade for $79.
Products

How can i open my imac with mountain lion in 32 bit. With the Mountain Lion, some important softwares are not functioning. Please help !

How can i open my iMac with mountain lion in 32 bit. With the Mountain Lion, some important softwares are not functioning. Please help !

Thx for yr reply. maybe i don't express myself very well. i know ML is 64 bit system. and it does not open up my VPN connection (the VPN connection i am talking here is Cisco and it is only in 32 bits) . i was wondering is there a way my macbook air 11 inch first generation can turn back into its original operation system, so that i can use the VPN connection. THX

Some Sales Orders are not replicating into CRM

Hi guys,
when I check SMQ2 in CRM, I find that some sales orders are not replicating into CRM, then check the error, its says check SMW01..
when I check the SMW01 it says validation error and BDOC status is F05 (information no processing). I tried to search the sales order in CRMD_Order transaction could not find the sales order...
*Error in SMW01*
Processing of document with Guid E01D11C71856C4F1AEBF0024E84DD0CE is canceled CRM_ORDER
Validation error occurred: Module CRM_DOWNLOAD_BTMBDOC_VAL, BDoc type BUS_TRANS_MSG. SMW3
It's not giving much clue what's the error is...
I tried to setup a request to replicate those sales orders.. those request also end up in the same error...
any help on this?
thanks,
Ken

Hello Ken,
When reprocessing a BDoc(via SMW01) you might need to set a flag.
Goto trxn. SMW01. Start the debugger using command '/h' and reprocess the BDoc. After going into the debug mode press SHIFT+F7 and put a breakpoint at 2nd Tab in : class:cl_smw_flow and method 'restart_processing'. Keep debugging(F5 or F6 accordingly) until you find the requisite flag l_retry_allowed and set it as 'X'. This will allow you to reprocess the Bdoc.
Thanks,
Rohit

MouseEvents are not triggered for JMenu

I would like to listen for MouseEvents but i'm not sure if it is a bug in java or some lack of knowledge on my side concerning event handling.
I have a simple menu with one mouse listener and seems that mouseReleased and mouseClicked events are not triggered always as i would expect.
if i run the code that has been attached below, than i have the following strange scenarios.
Menu0 is not opened and click on it once:
pressed Menu0
clicked Menu0
There is no mouseReleased received. why?
Menu0 is opened and click on it once again:
pressed Menu0
released Menu0
clicked Menu0
Menu0 is collapsed and i have all the events. ok
Menu0 is opened and click on Menu1:
pressed Menu1
released Menu1
Menu0 is collapsed and there is no mouseClicked event. why?
Menu0 is opened and go over Menu2 and click on it:
pressed Menu2
clicked Menu2
There is no mouseReleased event. why?
Press the mouse over Menu2 and release it over Menu3:
pressed Menu2
released Menu2
why is it 'released Menu2' and not 'released Menu3' if it is pressed and released Menu2 than where is the clicked event anyway.
import java.awt.event.MouseAdapter;
import java.awt.event.MouseEvent;
import java.awt.event.MouseListener;
import java.awt.event.WindowAdapter;
import java.awt.event.WindowEvent;
import javax.swing.JFrame;
import javax.swing.JMenu;
import javax.swing.JMenuBar;
import javax.swing.JMenuItem;
public class MouseEventTest
     public static void main( String[] args )
          JFrame frame;
          JMenuBar menuBar;
          JMenu menu, subMenu;
          JMenuItem menuItem;
          MouseListener mouseListener;
          mouseListener = new MouseAdapter() {
               public void mouseEntered( MouseEvent e )
               public void mouseExited( MouseEvent e )
               public void mouseClicked( MouseEvent e )
                    System.err.println( "clicked " + ((JMenuItem) e.getSource()).getText());
               public void mousePressed( MouseEvent e )
                    System.err.println( "pressed " + ((JMenuItem) e.getSource()).getText());
               public void mouseReleased( MouseEvent e )
                    System.err.println("released " + ((JMenuItem) e.getSource()).getText());
          menuBar = new JMenuBar();
          menu = new JMenu( "Menu0" );
          menu.addMouseListener( mouseListener );
          menuBar.add( menu );
          menuItem = new JMenuItem( "Menu1" );
          menuItem.addMouseListener( mouseListener );
          menu.add( menuItem );
          subMenu = new JMenu( "Menu2" );
          subMenu.addMouseListener( mouseListener );
          menu.add( subMenu );
          menuItem = new JMenuItem( "Menu3" );
          menuItem.addMouseListener( mouseListener );
          subMenu.add( menuItem );
          menuItem = new JMenuItem( "Menu4" );
          menuItem.addMouseListener( mouseListener );
          subMenu.add( menuItem );
          frame = new JFrame();
          frame.setTitle( "MouseEvent test for JMenu" );
          frame.setBounds( 320, 240, 320, 240 );
          frame.setJMenuBar( menuBar );
          frame.addWindowListener( new WindowAdapter() {
               public void windowClosing( WindowEvent e ) {
                    System.exit(0);
          frame.setVisible( true );
}

Well there are differences across Operating Systems. For example I'm using JDK1.4.2 on XP. When I click on Menu0 I get:
pressed Menu0
released Menu0
clicked Menu0
It is always better to use a "higher" level event when possible. In this case you should be using an ActionListener, if you want to know when a menu or menuItem is clicked. Or maybe you could use a MenuListener to know when a menu is opened and closed.

All my GPS Apps are not working anymore after upgrading to OS4

Hi folks,
all my GPS APPS are not working anymore since I upgraded to OS4.
I am living in Germany and using Iphone 3GS 32GB.
Are there any plans from apple to resolve this issue shortly ß Or shuld we
chance to google or Microsoft produkts....?

I'm getting very interested in GPS problems across the entire iOS device range. Ive got a 3GS and the GPS satellite fix stopped working completely recently. A fix identified using jailbreak and an ssh terminal tells me a good proportion of these problems are with locationd, the gps process in the iPhone, or more accurately, I think that it's possible for some of the data this process uses to become corrupted; the "fix" involves stopping the process and deleting the data it uses. On restart, locations is forced to rebuild the data, and everything then works.
I suspect this is true across the iPhone range - and worse, I think that the backup function in iTunes actually backs up the bad data. Thus, when you restore from backup, you actually put the problem back in! Either that, or GPS cache data isnt deleted when the iphone is restored.
What we need is an option in iTunes, or the iPhone settings, to clear GPS ephemeris and related data down and restart locationd: this will save apple a fortune in support at genius bars, as I reckon everyone who is getting a replacement is just getting a reblanked refurbished iPhone with no hardware fixes - they could be turning them around in the back of the stores!
We need to get some group pressure together to get an answer out of apple on this really - they do seem to have an approach which has much in common with the way the UK banks were dealing with overdraft fees - if you complained, they refunded just to keep you quiet and make sure you didn't shout. If this issue is an underlying gps driver or application demon issue, they should give us a way to work around the issue.

Sales orders from CRM are not getting blocked with credit check

Hi All
I have configured ECC in such a way that , if cutomer does not have enough creditlimt, then those sales order will get blocked. Our orders will come from CRM, and some times some orders are not getting blocked with credit check even though the customer does not have credit limit. And at the same time some orders are blocked with credit check...what are all the things that should be checked to diagnose the problem.
Thanks in advance for looking into this

Please check if you have any custom code/user exit in ECC which uses transaction code (VA01 , VA02 or VA05 etc) prior to invoking credit checks.
Orders created via CRM will not have transaction code set (SY-TCODE).

Embedded Fonts are not shown anymore

When I create a PDF from a Word Doc, the embedded Fonts are not shown anymore. In the previous Version it was working perfectly. My version is currently 11.0.10.

Thank you for your feedback. The Job im using is simple take a word document converting it into a pdf format. If this is done I will see it in my Acrobat view. There is no fonts at all. The System is notifying me that the font "ETBFGYI+DIN-Regular" are not embedded. And there will be some character not shown or printed correctly. I didn't change anything on the setting of Acrobat. I'm using this Acrobat almost for 2 years and I never had any problem. The Problem came up after the last update of the software to version 11.01.10.

Vlans dhcp status are not received

Hello,
I am configuring vlan on sg300-20 in dhcp mode.
One vlan that is directed connected to the adsl router get ip address and when I connect host to the ports in this vlan they also receive ip address and can go on internet.
The other four vlans dhcp status are not received.
Kindly help me check this. Thanks
Below is the config log:
switch4ba497#sh running-config
config-file-header
switch4ba497
v1.2.9.44 / R750_NIK_1_2_584_002
CLI v1.0
file SSD indicator encrypted
ssd-control-start
ssd config
ssd file passphrase control unrestricted
no ssd file integrity control
ssd-control-end cb0a3fdb1f3a1af4e4430033719968c0
vlan database
vlan 5,10,20,30,40
exit
voice vlan oui-table add 0001e3 Siemens_AG_phone________
voice vlan oui-table add 00036b Cisco_phone_____________
voice vlan oui-table add 00096e Avaya___________________
voice vlan oui-table add 000fe2 H3C_Aolynk______________
voice vlan oui-table add 0060b9 Philips_and_NEC_AG_phone
voice vlan oui-table add 00d01e Pingtel_phone___________
voice vlan oui-table add 00e075 Polycom/Veritel_phone___
voice vlan oui-table add 00e0bb 3Com_phone______________
ip dhcp relay address 192.168.3.1
ip dhcp information option
no boot host auto-config
bonjour interface range vlan 1
hostname switch4ba497
line telnet
exec-timeout 0
exit
no passwords complexity enable
username cisco password encrypted 7af78c911d5b48bea1dc2449d9d89513abeb4be5 privilege
15
ip http timeout-policy 0 http-only
ip name-server 192.168.1.1 192.168.3.1
ip telnet server
interface vlan 1
ip address 192.168.2.254 255.255.255.0
no ip address dhcp
interface vlan 5
name WAN
ip address dhcp
interface vlan 10
name Studio
ip address dhcp
interface vlan 20
name Service
ip address dhcp
interface vlan 30
name Admin
ip address dhcp
interface vlan 40
name Data
ip address dhcp
interface gigabitethernet1
switchport mode access
interface gigabitethernet2
switchport mode access
switchport access vlan 10
interface gigabitethernet3
switchport mode access
switchport access vlan 10
interface gigabitethernet4
switchport mode access
switchport access vlan 10
interface gigabitethernet5
switchport mode access
switchport access vlan 10
interface gigabitethernet6
switchport mode access
switchport access vlan 10
interface gigabitethernet7
switchport mode access
switchport access vlan 10
interface gigabitethernet8
switchport mode access
interface gigabitethernet9
switchport mode access
switchport access vlan 20
interface gigabitethernet10
switchport mode access
switchport access vlan 20
interface gigabitethernet11
switchport mode access
switchport access vlan 20
interface gigabitethernet12
switchport mode access
switchport access vlan 20
interface gigabitethernet13
switchport mode access
switchport access vlan 30
interface gigabitethernet14
switchport mode access
switchport access vlan 30
interface gigabitethernet15
switchport mode access
switchport access vlan 30
interface gigabitethernet16
switchport mode access
switchport access vlan 30
interface gigabitethernet17
switchport mode access
interface gigabitethernet18
switchport trunk native vlan 40
interface gigabitethernet19
switchport mode access
switchport access vlan 5
interface gigabitethernet20
switchport trunk native vlan 5
switch4ba497#sh ip int
    IP Address         I/F       Type     Directed   Precedence   Status
                                          Broadcast
0.0.0.0/32          vlan 10   DHCP        disable    No         Not
                                                                received
0.0.0.0/32          vlan 20   DHCP        disable    No         Not
                                                                received
0.0.0.0/32          vlan 30   DHCP        disable    No         Not
                                                                received
0.0.0.0/32          vlan 40   DHCP        disable    No         Not
                                                                received
192.168.2.254/24    vlan 1    Static      disable    No         Valid
192.168.3.102/24    vlan 5    DHCP        disable    No         Valid
switch4ba497#
Also i do not understand why the ip address is 0.0.0.0/32 because the dhcp server ip address is 192.168.3.1

Dear Customer,
Thank you for reaching Small Business Support Community.
In Layer 2 system mode, only the management VLAN can be configured with a static or dynamic IP address. In Layer 3 system mode, all the interface types (ports,LAGs, and/or VLANs) on the device can be configured with a static or dynamic IP. Configuring the device to work in either mode is performed in the Administration >System Settings page
When a DCHP Client starts a discovery process, it assigns a dummy IP address 0.0.0.0 before the real address is obtained. This dummy address has the status of “Not Received”.
Pretty much your problem should be solved by changing to Layer3 system mode. Please let me know if anything comes up and/or if there is any further assistance I may help you with.
Kind regards,
Jeffrey Rodriguez S. .:|:.:|:.
Cisco Customer Support Engineer
*Please rate the Post so other will know when an answer has been found.

How do I create a separate Address Book? I'm not asking about a mailing list but an address book where the addresses are not mixed in with my regular address b

How do I create a separate Address Book? I'm not asking about a mailing list but an address book where the addresses are not mixed in with my regular address book. I already have three address books created for me by Thunderbird. I add all new addresses to one of those but am afraid to delete the other address books because some of their addresses are not repeated in my "main" address book. So if I don't delete all the names in one of the existing books, I need to create an empty book that will not mix the addresses with those in another address book. HOW DO I CREATE A NEW, EMPTY ADDRESS BOOK? I want to be able to create various mailing LISTS using the addresses in this new book so I will eventually have a special address book with a variety of mailing lists I can use as I wish.

In 24.4.0 there is no File|New|Address Book. There is File|New|Address Book Contact. How do I create a new address book ?

Some NetStream statuses are not triggered anymore with FP 11.2

Similar Messages

Maybe you are looking for