Some question about mdm java api and portal content

Hi Gurus,
I am new to MDM. I am going to develop some web dynpro application using mdm java api.
My question is regarding the relationship between MDM version and NW version:
for example
1.MDM5.5 JAVA api can be deployed to CE 7.11 server?
2.MDM7.1 JAVA API can be deployed to CE 7.11 server? or can only be deployed to CE server.
the same question for the MDM portal content.
the possible dev environment for our company would be:
1.MDM7.1
2.CE7.2(do we need another EP7 server for the UWL?)
Best regards,
John

Hi,
I am using Portal 7.0. MDM version is 7.1.
My problem is ... i am trying to connect WebDynpro (JAVA) to MDM7.1. But am unable to do so. I have a WD Frame in which i have a WD iView and the MDM iView. But i am unable to pass parameters from the WD iView to MDM Item Details iView.
Note:
1. I have deployed MDM JAVA API on NWDS
2. I have specified " * " as a parameter to pass from the URL in the Item Details iView.
Please help.
Every help that i have read talks about CE7.1 but not NW 7.0
-Alpana

Similar Messages

Some questions about Unity 4.0 and IPC

I have a couple of questions and I was looking for "real world" answers, not specific answers from the design guide.
1.What is this bandwidth requirement between Exchange and Unity and what is it used for?
2. What sort of issues would we experience if we placed the Unity UM Server at the Colo and placed the Exchange server at the customer premise; with a single T1 between the sites?
3.What else is involved with a Unity UM install vs. a Unity VM install?
4.Does the Unity UM and Exchange servers have to be running AD?
5. Can Unity or the Exchange box be the Domain Controller? Or does it need to be a separate server?
6. Where does a vm message get streamed from? The Unity server or the Exchange server?

No you do not pay for FaceTime. It uses your WiFi network, so if you have access to WiFi it is free.
There is no server required for FaceTime, it will use a direct device to device protocol.
I can't answer the question about using phones in different countries as that will depend on if you buy a phone that is locked to a carrier.
If you buy a phone in Germany and it is locked to a German phone network then it will most likely not work with a SIM from Turkey. You would need to buy an unlocked phone which are very expensive as they do not have any carrier subsidy applied to the price.

Some Questions about Sun Java Studio Creator IDE

I am quiet new to the IDE, but I experienced some
behaviours I do not actually understand.
I hope I can get some help here.
Sun Java Studio Creator Update 9
Each time I change the font size and type using the
"Advanced" option of the IDE the font I changed correctly.
But after closing and restarting the IDE the fonts are set
back to the default undoing my changes.
Is there a way to use code completion for the jsf tags within jsps ?
I know that there are code clips for adding jsf components to the jsp,
but (coming from eclipse ide) I'd appreciate a feature like the code completion for the jsf components. If there is a way by configuring, how can that be acchieved ?
Trying to add a "taglib declaration" to the jsp e.g. "<%@taglib uri="..." prefix="..." I get the warning that the tags of the xml must be welformed.
How can I add those taglib declarations correctly ?
Using the "File System View" after each change made e.g. to a jsp the
tree collapses and I have to navigate to the tree again to find my resources.
Is this common behaviour or to be configured ?
Thx for any support.

Hi,
1. The changes made to the font size and type are indeed getting reset in Creator update 9. However this behaviour is not seen in the latest version of Creator which is Creator 2 EA 2. The final version of this will be available very soon and we encourage you to try the new release which has lot more features and lot of bug fixes. For more details please visit:
http://developers.sun.com/prodtech/javatools/jscreator/ea/jsc2/
The following thread will explain about the tags and how they should be well formed:
http://swforum.sun.com/jive/thread.jspa?forumID=123&threadID=47615
The behaviour of the File System View was encountered in Creator update 9 as you have mentioned. Once again this behaviour was not see in the latest version Creator 2 EA 2.
So we recommend you to try out the latest version.
We appreciate your valuable feedback and thank you for the same.
Cheers
Giri

MDM JAVA API to enter value into field of type date

Hi All,
I am having an input field in a typical Dynpro application where a date would be entered.I want to enter the date in my MDM table in a field of type "Date".Do you have any idea about MDM JAVA API's I need to do this.Also how can I do this ?
Thanks
Vinay

Hi,
Web Dynpro shall return you a type Date field. For Value, you shall have to pass SystemTime Object.
Just get the substring of Date.toString() and convert them to Integer ..
So a typical date would look like yyyy-mm-dd (eg: 2006-10-19) and not yyyymmdd.
SystemTime st = new SystemTime();
st.setYear( Integer.parseInt(Date.toString().substring(0,4));
st.setMonth ( Integer.parseInt(Date.toString().substring(5,7));
st.setDate ( Integer.parseInt(Date.toString().substring(8,10));
A2iField date = new A2iField("fieldname", new Value(st));
Hope that helps..
Regards,
Tanveer.
<b>Please mark helpful answers</b>
Note: The above mentioned code is not pasted from any editor..So might contain syntax error..

How to access the SAP MDM destinations using mdm java api in 7.1

hi,
I have SAP MDM 7.1 SP11 and SAP Portal 7.3 and developing the custom webdynpro application using the JAVA MDM API. I want configure the SAP MDM destinations in SAP Portal .
How to access the MDM destinations in java code using API? and how to create the connection with MDM using the MDM destinations.
Please provide the code for access the SAP MDM destinations in java code using MDM java api and creating the connection to MDM.
Thanks

Jun,
Thanks for the reply and api information.
I have got this api information from the following sap documentation. But i am looking for the code by implementing this class and creating the mdm connection.
Creating an MDM Connection Using Java Code - SAP NetWeaver Master Data Management (MDM) - SAP Library
if any thing can you share it.
Thanks

MDM Java API guide

Do any other guides about MDM Java API exist (except MDM_API_Tutorial and MDM 5.5 SP05 - Java API Migration Guide.pdf) ?
Especially MDM Search Java API interesting.

Heii ,
For this please follow these links
http://help.sap.com/saphelp_mdm550/helpdata/en/45/0068570b0c0487e10000000a155369/frameset.htm
http://help.sap.com/saphelp_mdm550/helpdata/en/45/efdc5bb7b404a9e10000000a114a6b/frameset.htm
http://help.sap.com/saphelp_mdm550/helpdata/en/45/50b345af8e3be6e10000000a1553f7/frameset.htm
you may find this useful.
Please reward
Rgds
Deepak

How to create relationship between two records using MDM Java APIs

Hi,
I am trying to create relationship between two records using Java Apis. Please guide me in doing this.
Regards,
Niraj

Hi Niraj,
There is ModifyRelationshipsCommand:
http://help.sap.com/javadocs/MDM/SP06/com/sap/mdm/data/commands/ModifyRelationshipsCommand.html
Retrieve Relationship command:
http://help.sap.com/javadocs/MDM/current/com/sap/mdm/schema/commands/GetRelationshipListCommand.html
Also, please refer similar thread, MDM Java API and relationships.
Hope it helps..
Regards,
Mandeep Saini

How could JAVA API and ABAP API useful to MDM.

Hi Experts,
How could JAVA API and ABAP API useful to MDM, and any coding in Java or ABAP is required in MDM.

Hi Reema,
Java API and ABAP API are verry usefull to MDM to integrate MDM with other SAP componants like SAP R\3, EP etc. :
It dose not required any coding in MDM infact in JAVA API coding can be done on NWDS(Netweaver Developer Studio).And for ABAP API coding is done on SAP R\3 System in ABAP editor.
JAVA API:
By using Java API MDM client operations can be performed.For one need to install NWDS and to deploy some .jar files and with the help of standard classes and interfaces it can be connected to MDM server and various operations like create repository ,connect to repository ,Data mainuplation etc.
ABAP API:
Suppose you have an Expert abaper and you want him to perform MDM operations.In that case he need not to learn MDM basic Data types infact by doing some settings on R\3 and MDM server side an ABAPer can perform
MDM Cnsole and MDM Data Manager level operations.
you can go through these links
http://help.sap.com/javadocs/MDM/SP06/overview-summary.html
/people/bv.pillai/blog/2006/11/28/installing-mdmtech-add-on-and-configuring-the-mdm4a-mdm-for-abap-api
Here the coding is done on SAP R\3 system.
hope it will give you some idea about Java API and ABAP API
Reward if helpful
Thanks ,
Vinay Yadav

Some questions about javacard 2.1.1 and smartcardio

Hello i have some question about java card 2.1.1 and the smartcardio package.
1.) I want to sign a message with the Signature.ALG_RSA_SHA_PKCS1 algorithm. I use the following code in the applet to sign the message:
final static byte P1_CREATION_MODE = (byte) 0x01;
final static byte INS_SIGN_MODE = (byte) 0x60;
final static byte SmartCard_CLA = (byte) 0xB0;
private void signMessage(APDU apdu) {
        byte[] buffer = apdu.getBuffer();
        byte byteRead = (byte) (apdu.setIncomingAndReceive());
        signature.init(privateKey, Signature.MODE_SIGN);
        short length = signature.sign(buffer, ISO7816.OFFSET_CDATA, byteRead, buffer, (short) 0);
        apdu.setOutgoingLength((short) length);
        apdu.sendBytesLong(buffer, (short) ISO7816.OFFSET_CDATA, (short) length);
        apdu.setOutgoing();
    }On the host side I use the following code to connect to the card and to send the sign apdu:
if (TerminalFactory.getDefault().terminals().list().size() == 0) {
            LOGGER.log(Level.SEVERE, "No reader present");
            throw new NoSuchCardReader();
        /* Select the first terminal*/
        CardTerminal terminal = TerminalFactory.getDefault().terminals().list().get(0);
        /* Is a card present? */
        if (!terminal.isCardPresent()) {
            LOGGER.log(Level.SEVERE, "No Card present!");
            throw new NoSuchCard();
        /* Set the card protocol */
     Card card = terminal.connect("*");
        ATR atr = card.getATR();
        LOGGER.fine(getHexString(atr.getBytes()));
        LOGGER.fine(getHexString(atr.getHistoricalBytes()));
        CardChannel channel = card.getBasicChannel();
        CommandAPDU cmd = new CommandAPDU((byte) 0xb0, (byte) 0x60, (byte) 0x01, (byte) 0x00, new String("datadatdatadata").getBytes(), (byte) 0x40);
     ResponseAPDU response = channel.transmit(cmd);
        card.disconnect(false);But this does not work and i got the following error
javax.smartcardio.CardException: sun.security.smartcardio.PCSCException: Unknown error 0x8010002f
        at sun.security.smartcardio.ChannelImpl.doTransmit(ChannelImpl.java:202)
        at sun.security.smartcardio.ChannelImpl.transmit(ChannelImpl.java:73)
        at de.upb.client.smartmeter.SmartMeter.initSmartCardApplet(SmartMeter.java:114)
        at de.upb.client.smartmeter.SmartMeterApplikation.main(SmartMeterApplikation.java:39)
Caused by: sun.security.smartcardio.PCSCException: Unknown error 0x8010002f
        at sun.security.smartcardio.PCSC.SCardTransmit(Native Method)
        at sun.security.smartcardio.ChannelImpl.doTransmit(ChannelImpl.java:171)
        ... 3 more2.) 3Des encryption
I want to use the 3Des algorithm to encrypt my data. I use
keyDES = (DESKey) KeyBuilder.buildKey(KeyBuilder.TYPE_DES,
                    KeyBuilder.LENGTH_DES3_2KEY, false);
cipherDES = Cipher.getInstance(Cipher.ALG_DES_CBC_ISO9797_M2, false);But i do not know what is the aquivalent on the host side??
3.) Another problem is that i am not able to send the modulus of a public key from the host applikation to the smard card
new CommandAPDU((byte) 0xb0, (byte) 0x20, (byte) 0x01, (byte) 0x00, modulus.toByteArray()); // create the apdu
// the method in the applet
private void setServerKeyMod(APDU apdu) {
        byte[] buffer = apdu.getBuffer();
        try {
            byte byteRead = (byte) (apdu.setIncomingAndReceive());
            short off = ISO7816.OFFSET_CDATA;
            // strip of any integer padding
            if (buffer[off] == 0) {
                off++;
                byteRead--;
            publicKeyServer.setModulus(buffer, off, byteRead);
        } catch (APDUException ex) {
            ISOException.throwIt((short) (SW_APDU_EXCEPTION + ex.getReason()));
    }The error code is 6700
4.) My last problem ist, that i am not able to use a value bigger than 0x7F as the ne field in the apducommand, because i get the following error
CommandAPDU((byte) 0xb0, (byte) 0x60, (byte) 0x01, (byte) 0x00, data, (byte) 0xff);
java.lang.IllegalArgumentException: ne must not be negative
        at javax.smartcardio.CommandAPDU.<init>(CommandAPDU.java:371)
        at javax.smartcardio.CommandAPDU.<init>(CommandAPDU.java:252)I thought that it this should be possible in order to use all the bytes of the response apdu.
If you need more code to help please let me know.
Cheers
Edited by: 858145 on 06.07.2011 08:23

2) What is PKCS? what is the difference between
PKCS#11 and PKCS#15??PKCS is the abbreviation of "Public-Key Cryptography Standards"
PKCS #11: Cryptographic Token Interface Standard
See http://www.rsasecurity.com/rsalabs/node.asp?id=2133
PKCS #15: Cryptographic Token Information Format Standard
http://www.rsasecurity.com/rsalabs/node.asp?id=2141
If you want to use yor smartcard as secure token it doesn't have to be a JavaCard.
BTW: I don't remember a way to access PKCS#15 tokens on a JavaCard from within an oncard JavaCard program. If you want to use keys in your oncard program, you have to transfer it onto the card or generate it oncard and export the public key by your own oncard/offcard code.
Jan

How and where to install MDM Connector and MDM Java API

Hi all
I am installing MDM Server 5.5 and refering to Installation gude
MDM 5.5 SP06 installation guide (Document Version 1.1 December 10, 2007). While installing Development and Portal components , We have to install MDM Connector and MDM JAVA API. I want to know whether the file JAVAAPI<version>.sca file is to extracted on MDM Server or SRM Server ( Using SDM). Please let me know
Thanks in advance.
Vitthal prabhu

Hi Vitthal,
We have to install MDM Connector and MDM JAVA API.
All these sca files that u got along with the business content needs to be deployed onto Web Application Server (recommended WAS 7.0 ).
U can deploy these files with the help of SDM.
Hope dis solves ur problem.
Regards Tejas..............

Some questions about the integration between BIEE and EBS

Hi, dear,
I'm a new bie of BIEE. In these days, have a look about BIEE architecture and the BIEE components. In the next project, there are some work about BIEE development based on EBS application. I have some questions about the integration :
1) generally, is the BIEE database and application server decentralized with EBS database and application? Both BIEE 10g and 11g version can be integrated with EBS R12?
2) In BIEE administrator tool, the first step is to create physical tables. if the source appliation is EBS, is it still needed to create the physical tables?
3) if the physical tables creation is needed, how to complete the data transfer from the EBS source tables to BIEE physical tables? which ETL tool is prefer for most developers? warehouse builder or Oracle Data Integration?
4) During data transfer phase, if there are many many large volume data needs to transfer, how to keep the completeness? for example, it needs to transfer 1 million rows from source database to BIEE physical tables, when 50%is completed, the users try to open the BIEE report, can they see the new 50% data on the reports? is there some transaction control in ETL phase?
could anyone give some guide for me? I'm very appreciated if you can also give any other information.
Thanks in advance.

1) generally, is the BIEE database and application server decentralized with EBS database and application? Both BIEE 10g and 11g version can be integrated with EBS R12?You, shud consider OBI Application here which uses OBIEE as a reporting tool with different pre-built modules. Both 10g & 11g comes with different versions of BI apps which supports sources like Siebel CRM, EBS, Peoplesoft, JD Edwards etc..
2) In BIEE administrator tool, the first step is to create physical tables. if the source appliation is EBS, is it still needed to create the physical tables?Its independent of any soure. This is OBIEE modeling to create RPD with all the layers. If you build it from scratch then you will require to create all the layers else if BI Apps is used then you will get pre-built RPD along with other pre-built components.
3) if the physical tables creation is needed, how to complete the data transfer from the EBS source tables to BIEE physical tables? which ETL tool is prefer for most developers? warehouse builder or Oracle Data Integration?BI apps comes with pre-built ETL mapping to use with the tools majorly with Informatica. Only BI Apps 7.9.5.2 comes with ODI but oracle has plans to have only ODI for any further releases.
4) During data transfer phase, if there are many many large volume data needs to transfer, how to keep the completeness? for example, it needs to transfer 1 million rows from source database to BIEE physical tables, when 50%is completed, the users try to open the BIEE report, can they see the new 50% data on the reports? is there some transaction control in ETL phase?User will still see old data because its good to turn on Cache and purge it after every load.
Refer..http://www.oracle.com/us/solutions/ent-performance-bi/bi-applications-066544.html
and many more docs on google
Hope this helps

MDM 5.5 SP04 Java API and Web Service Documentation

Is there documentation available that reflects the SP04 changes to the Java API, and the web services that are now available?
As of this morning, service marketplace contained spotty SP04 docs.
Thanks in advance,
Mike

Mike,
A cookbook would be wonderful (I think our developers would throw a party)!
An updated object model (as a preface to the user guide) for the legacy API (MDM4J.jar) AND the new "rebranded" API (mdm-*.jar) would also work.
I've been reduced to comparing the SP3 & SP4 javadocs
One fun approach that appears to be working for us, is to model each process using the DataManager, and try to duplicate that exactly via the corresponding API objects (e.g. the simple Connect-Find Table-Search Table-View Result Set-View Record-CheckOut/Upsert/Validate/CheckIn dance). New features in the DataManager reveal themselves a little more readily
Good luck,
...Dee

Steps for java apis and mdm

Hi all ,
How we can work with JAVA APIs and MDM .
Please tell step by step ways.
thanks in advance.
Thnks
nm

Hi Man,
You have to specify the correct JAR files in the classpath of the Java Virtual Machine (JVM). The API consists of five JAR files:
1. mdm-admin.jar
2. mdm-common.jar
3. mdm-core.jar
4. mdm-data.jar
5. mdm-protocol.jar
These files in one single archive file with the name MDMJavaAPI_Ver<buildnumber>.zip. you can download this file from the service market place by using mentioned below link:
http://service.sap.com/swdc
then goto Download>Support Packages and Patches> Entry by application group -->SAP NetWeaver -->SAP MDM -->SAPMDM5.5 -->Java API
for the Java API documentation, you can download it from the link below:
http://help.sap.com/javadocs/MDM/current
But remember one thing that this JAVA API Version file must be compitable with your MDM Server version.you can verify this as per the build version.
Hope this will help you.
TNR,
Saurabh...
Edited by: Saurabh Kumar Sahu on Feb 1, 2008 8:09 AM
Edited by: Saurabh Kumar Sahu on Feb 4, 2008 7:49 AM

Some question about fade in // fade out by hideEffect and showEffect in Actionscript

Some question about fade in // fade out by hideEffect and
showEffect in Actionscript
Please kindly take a look at the following page:
http://camusmiu.no-ip.com/HounganQuestion/PictureHolderTest.html
(can view source)
I tried to make an image preloaded and scale the image to
it's preferred size.
When I came to consolidate the stuff into a component, I
found the application goes weird as I implementation the show/hide
effect.
The third trial which just hide and show the images directly,
instead of using viewstack, fail to bring the second image onto
screen.
It just used fadeOut instead of fadeIn(you see there is a
flash of the second image)
After some study of showEffect and hideEffect behaviour,
seems the mechanism of hide/show a component works in this way:
this._fadeIn:Fade = new Fade();
this._fadeIn.alphaFrom = 0;
this._fadeIn.alphaTo = 1;
this._fadeIn.duration = 1000;
this._fadeOut:Fade = new Fade();
this._fadeOut.alphaFrom = 1;
this._fadeOut.alphaTo = 0;
this._fadeOut.duration = 1000;
Component_A.visible = true;
Component_A.setStyle("showEffect", this._fadeIn);
Component_A.setStyle("hideEffect", this._fadeOut);
then when I set Component_A.visible = false, the sequence
works like following:
Component_A.visible = true
Component_A.visible = true, alpha = 100;
Component_A.visible = true, alpha = 50;
Component_A.visible = true, alpha = 0;
Component_A.visible = false;
The above sequence works visa versa as:
Component_A.visible = false;
Component_A.visible = true, alpha = 0;
Component_A.visible = true, alpha = 50;
Component_A.visible = true, alpha = 100;
Component_A.visible = true;
(Correct me if i am wrong)
========================================================================================== ====
From what I observe from the application, I have two
question.
1) When more than one component using the this._fadeIn,
this_fadeOut as the hide/show effects, the component in instance of
this._fadeIn? will it mess out if more than one component using the
fadeIn instance in the same time?
2) from the third component, i.e. PictureHolder3, when I load
other the picture , it fade out the new image instead of fading
in... Seems there is problem if I hide show too frequent. I think
when I hide then show right the way, the component only do the hide
part...
Can someone pls look into it and tell me what I did wrong?
Cuz in normal practice I don't think appropriate to use ViewStack
in Actionscript...

Hello Jack,
Currently, you can only import an swf file or you can embed videos from youtube, vimeo etc. into Muse / add HTML5 Video to Your Website.
Take a look at these simple videos that explain the currently available processes for adding videos in Muse, in a step by step method:
1. http://tv.adobe.com/watch/learn-adobe-muse-cc/inserting-a-youtube-flic kr-or-hulu-video/
2. http://www.youtube.com/watch?v=5in4swnIFsw
3. http://www.youtube.com/watch?v=KnBFLQheOk4
Hope this helps.
Cheers
Parikshit

How to start to work on MDM JAVA API by using webdynpro for java

Hi all
I have basic idea on MDM business package thru portal by using standard iViews.
now i am planning to work on MDM JAVA APIs by using Webdynpro for Java as UI.
1) can you please share the required documents on the same. how to start working on this by using MDM JAVA APIs in webdynpro for java
2) what are the JARs files are required and how to integrate those jar files into webdynpro for java application.
3) is there any SDN help on MDM JAVA API with webdynpro for java? . can you please send the link on the same.
4) can you please help by providing sample code on how to use JAVA APIs for retrieving,deleting,inserting and Updating the data in the database.
if anybody helps on the same then it is the great help to me.
points are always rewardable...
Regards
Suresh babu

Hi Suresh,
You can have the MDM JAVA API javadocs from the link
http://help.sap.com/javadocs/MDM/SP06P2/index.html
There you can see a package named com.sap.mdm.examples.The classes in it contains some examples using which you can start understanding the code.
You need to have MDM JAR files for it. And these JAR files to be used at build time can be added to the project thru :-
Right click on project-> properties->Java Build Path - > Add external JARs
At run time you can add them the reference in
Right click on project-> properties->web dynpro references->library reference.
Thanks
Namrata

Some question about mdm java api and portal content

Similar Messages

Maybe you are looking for