Some questions about the correct way to recharge the zen micro batt

Ok..i don't think this is convered in the FAQs.
I copied this from the FAQ----At the present moment, the only possible way to avoid the standby loss is removing the battery after you finish listening to music. Gi'ven the wear and tear resulting, this is not really an option. It will help, though, if you prime your battery correctly, recharge it often (topping it up, not only resorting to full recharges),
Ok...my question--
) to preserve battery life span, shouldn't we wait for the player to die off complete, for example when it starts to display "low battery" before we recharge it's Does this post mean that we shouldn't actually wait for the battery to be complete;y drained off before a recharge? Does it mean we should always recharge, say when there's one bar left?
2) Before doing any music transfer using the computer, should we always make sure the zen micro was fully charged first before the transfer since USB port also serves as a charger. I tried using a completely drained player before music transfer and the player stops charging after 3 hours, which shouldn't be the case because USB always take a longer time to charge (i was told twice as much) and true enough, after deplugging from the USB port, the player starts charging again. Note that this always happen, meaning i can never get a complete 5 hours charge using the USB. What is wrong? And after such charge from USB, i noticed that the battery life the next day is like one third of what it usually last when i charged it through a charger...
I know this is a long post but can someone tell me the correct way of charging?
Thanxs!

immunophilic wrote:
Ok..i don't think this is convered in the FAQs.
I copied this from the FAQ----At the present moment, the only possible way to avoid the standby loss is removing the battery after you finish listening to music. Gi'ven the wear and tear resulting, this is not really an option. It will help, though, if you prime your battery correctly, recharge it often (topping it up, not only resorting to full recharges),
This is from JazzMC's FAQ right? (I added a link to this a day or two ago from the main FAQ post) I hadn't spotted this before and I don't agree with most of this. The wear and tear is minimal, but it's more a case of practicality that removing the battery is a pain. Also priming is not really that important with Lithium Ion, and topping up won't make any difference to the battery drain.
) to preserve battery life span, shouldn't we wait for the player to die off complete, for example when it starts to display "low battery" before we recharge it's Does this post mean that we shouldn't actually wait for the battery to be complete;y drained off before a recharge? Does it mean we should always recharge, say when there's one bar left?
Look in my Nomad Primer, which is essentially a distilled version of the information from BatteryUni'versity.com. Top-up charges prolong the life of a Lithium Ion battery. These are all reference in the FAQ.
2) Before doing any music transfer using the computer, should we always make sure the zen micro was fully charged first before the transfer since USB port also serves as a charger. I tried using a completely drained player before music transfer and the player stops charging after 3 hours, which shouldn't be the case because USB always take a longer time to charge (i was told twice as much) and true enough, after deplugging from the USB port, the player starts charging again. Note that this always happen, meaning i can never get a complete 5 hours charge using the USB. What is wrong? And after such charge from USB, i noticed that the battery life the next day is like one third of what it usually last when i charged it through a charger...
Because of the Micro's design there will always be a difference in the amount of power it can pull via USB vs. the drain when copying files to it. USB is slower to charge than the mains adapter, but it should charge fully given time (which could be twice as much as using the mains adapter).
There is a known issue with the battery draining on the Micro, but you should know this having read JazzMC's page. This is the reason the battery is so low the next day.

Similar Messages

What is the correct way to inform the controller of an exception in MVC?

Hi this question has been on my mind for a while.
Imagine you have a an application based on MVC (mode, view controller) design pattern.
If a non-fatel exception is thrown in the model (e.g. a number format exception) what is the standard way to of informing the controller so that it can do something useful like display an error pop-up or 'gracefully' shut-down the application.
The two ideas I came up with are:
-Return -1 or some other variable in the 'catch' of the try/catch.
Could be messy, every time you called a risky method you would have to wrap it in an if statement.
-Declare the model as throwing the exception - that way the controller can 'catch' it and do something useful.
Possibly makes the controller less cohesive.
-Handle the error directly from the model by having it display a pop-up error message or forward to an error page etc.
This would make the model less cohesive.
The controller should still be informed for the exception so it can decide what to do next - if the exception occurred during form validation shouldnt the controller e responsible for redisplaying the form with an error message?
Is there a 'best practice' of handling exceptions?
Thanks
Edited by: vijizzle on May 12, 2010 8:25 PM

Just have it throw an Exception and let the Controller deal with it.
Using a pop-up in the Model makes no sense to me. User interface is the View's job. Ultimately, an error pop-up may be presented, but the problem will be passed back to the View before that happens.

What is the correct way to restore the catalog after a disk failure?

I am running the latest Itunes on Vista. The disk failed on my old computer and I have a backup of the catalog file. The music files are on external storage (NAS). I've been searching for instructions on how to restore Itunes.
The catalog is about 1 week out of sync with the music files because I added some music in between backups of the catalog file and the disk failure.
In a perfect world, I'd like to restore the catalog with playlists and the album art.
Are there instructions to accomplish this or do I need to rebuild the catalog from the music files and recode my playlists?

Firstly I don’t have a NAS drive so what I say applies to and external HD, but it should be similar.
When you say catalogue file, I guess you mean the iTunes database files – iTunes Library.itl and iTunes Music Library.xml. The xml file is just used to allow other programs access to the library but can be useful because you can rebuild the itl file from it.
If you want your art work, you need a folder in the iTunes folder called Album Artwork.
So ideally you would like to be able to recover your old iTunes folder from backup.
If I understand you correctly, you had all your music on a NAS drive and the library files on your internal drive. Were all the music files/folders located the iTunes Music folder on the NAS drive? I will assume you have, it is much harder to get things working if they were not.
I guess you now have your NAS drive mapped into your new computer so you can see it as a drive letter.
So I hope this will work for you…
With iTunes closed, drag the iTunes folder from it’s current location to your desktop. I think the iTunes folder is in Music in Vista.
Now copy your backup iTunes folder into Music.
Now start iTunes and got to Edit>Preferences>Advanced>General and set the location of your iTunes Music folder to your folder on the NAS drive.
If you can see your music as it was when you did the backup, you can use Add Folder to Library to add the folder containing your music. Don’t worry, this shouldn’t create duplicates but it will add any tracks not currently in your library.
If you don’t have the iTunes folder, the procedure is similar except that instead of dragging the whole iTunes folder out to the desk top, just drag iTunes Library.itl and replace it with the backup. You won’t get your artwork if you just do this.

What is the correct way to determine the install location of Acrobat/Reader to install plugins?

We were previously using the following registry key to determine where we need to install our Acrobat/Reader plugin.
HKEY_LOCAL_MACHINE\Software\Adobe\Adobe Acrobat\%d\InstallPath
HKEY_LOCAL_MACHINE\Software\Adobe\Acrobat Reader\%d\InstallPath
(and append \plugin_ins to that result)
With Acrobat DC, I no longer see that registry key.
I was planning on changing our code to instead look here to determine the install paths:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\App Paths\Acrobat.exe\Path
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\App Paths\AcroRd32.exe\Path
Is this the recommended way of determining where to install plugins? I would rather not have our installation break when they update Acrobat/Reader the next time (for example maybe in the future they decide to change the executable name...)

Enterprise Guide can be found at http://www.adobe.com/devnet-docs/acrobatetk/tools/AdminGuide/index.html   (came right up on a web search for me). You want the information about product tracks and installer bit locations.
SDK releases are usually within 30 days of the product release.

What's the correct way to do the update of AddOn

Hi,
Let's say I install the Add-On on server and pushed to each client, if I have to change something in AddOn, do I need to unstall this Add-ON and wait till all clients uninstall current AddOn and then i deploy new version to server and each client has to install the new AddOn again? Is this usual way to do the update of AddOn ?
Thanks!
Lan

Hi Gordon,
Ok, Thanks!
P.S. But why SAP B1 doesn't check each Add-On ver # in server side when each time it is launched on client side, If the AddOn has new version, then download it and reinstall it. That's more smart!
Lan

Could someone show me the correct way to use the Vector in the code below?

Would someone mind explaining to me why I am getting a NullPointerException when I run the code below? I initialized the vector in the constructor so it should follow through the whole class right? What would be the right way to do it?
import java.util.Vector;
public class AlumniDirectory
    private String faculty;
    private static Vector alumni;
    /** Constructor reads faculty Name and inits new vector **/
    public AlumniDirectory(String facultyIn)
        Vector alumni = new Vector();
        faculty = facultyIn;
    /** Method adds a new Alumni to the list **/
    public void addAlumnus(Object o)
        alumni.addElement(o);
    /** Method removes a Alumni from the list **/
    public void removeAlumnus(Object o)
        alumni.removeElement(o);
    /** Method searches for Alumni by last name and graduation year **/
    public void searchAlumnus(String lastNameIn, int years)
      // Code will go here eventually
    }

And probably you want a list of Alumni not a vector of Objects. So try this:
import java.util.List;
import java.util.ArrayList;
public class AlumniDirectory{
    private final String faculty;
    private final List<Alumnus> alumni = new ArrayList<Alumnus>();
    /** Constructor reads faculty Name and inits new vector **/
    public AlumniDirectory(String facultyIn)
        faculty = facultyIn;
    /** Method adds a new Alumni to the list **/
    public void addAlumnus(Alumnus alumnus)
        alumni.add(alumnus));
    /** Method removes a Alumni from the list **/
    public void removeAlumnus(Alumnus alumnus)
        alumni.remove(alumnus);
    /** Method searches for Alumni by last name and graduation year **/
    public void searchAlumnus(String lastNameIn, int years)
      // Code will go here eventually
    }-Puce
Edited by: Puce on Oct 23, 2007 7:43 PM
Edited by: Puce on Oct 23, 2007 7:46 PM

What is the correct way to determine the width and height of a captivate movie at runtime in AS3?

I have an entire layout framework built and one of the controls is a GUIControlWrapper with every conceivable option for wrapping and aligning (uniform scale, stretch, stretchwidthonly_aligntop/middle/bottom, stretchheightonly_alignleft/center/right, etc.) non-framework controls (i.e. controls that are display objects, but do not inherit from my layout framework's base GUIControl display class).
Generally this wrapper obtains the object size by calling wrapped_control.getRect( wrapped_control ), to obtain the object's rectangle in its own coordinate system (i.e. its unscaled or original size), and it clips this rectangle to the origin by setting the left and top properties to zero.
The problem I'm encountering only affects captivate movies. When I used my framework's uniform scale option, there ends up being a gap at the bottom exactly the size of the captivate movie's playbar (which is visible), which indicates to me that the captivate movie's getRect and height properties are overreporting the height.
If I use the captivate movie's "cpMovieWidth" and "cpMovieHeight" properties instead, then the uniform scale results in perfect alignment. The captivate movies "contentHeight" variable is 38px smaller than "cpMovieHeight", and the playbar height is 40, which is about that 38px difference.
So my question is, why do captivate movies' getRect and height methods report the wrong height for the movie, such that if you actually scaled the clip based on that height to fit the stage size, there is a gap about the size of the playbar?

I'm sure it's because the movie controls are a seperate swf. CP supplies you with the variable that works as you've found.

What is the correct way to format file paths and names in the structapp file?

I am trying to create a structured application to export fm files as xml, and probably read the xml back to fm.
In the structured application file (structapp), I need to specify the locations of the various files (DTD, read/write, template, etc). I would like to place these files on a shared server so others can use the same structapp file (that is, a cop of it). What is the correct way to format the file paths and names? Can folders folder names and file names have spaces in them? I tried the following, for example:
\\serverName\shareName\folder 1\folder 2\file name.dtd
I use the same format for the template file and the read/write rules file.
When I try to save an fm file to xml, FrameMaker says that it cannot read the DTD; however, the resulting xml file appears to be well-formed. The DOCTYPE element in the resulting xml is formatted with forward slashes and spaces replaced with %20.
I tried using forward slashes and replacing spaces with %20, but then I get an error about reading the read/write rules.
NOTE: I have another structured application to read xml into fm. This application does not have a DTD file. The template and read/write rules files are specified as above. Except for complaining about a lack of a DTD, the application works fine; it even applies an XSLT in the process. Again, when I DO add a DTD to this latter application, I get the same complaint about not being able to read the DTD.
I am using fully patched FrameMaker 9 in Windows XP.
Thanks,
Van

Hi Van,
The XML parser and FrameMaker are not the same thing. The Error Log says which component created which message. The XSL processor is another option that can throw messages. The "\\server\path\some.dtd" syntax in structapps.fm seems to be fine for some tools, as Internet Explorer with XML tools successfully finds the DTD which appears as "//server/path/some.dtd" in the XML. But apparently Xerxes, the XML parser bundled with FrameMaker, does not like this notation.
If you have a path with a drive letter, "H:\path\some.dtd", FrameMaker turns that into "file:///H:/path/some.dtd". It seems, Xerces would like to see "file:/" in front of absolute paths.
This is what I have in structapps.fm:
Template: \\server\path\projecttemplate.fm
DTD: some.dtd
Read/write rules: \\server\path\projectrules.txt
DOCTYPE: …
Entity locations
Entity search paths
1: \\server\path\
In the structapps.fm I have the DTD without path information. The resulting XML (without XSL postprocessing) then contains just the file name with a relative path back to the book folder (when saving a book as XML). It therefore requires the DTD to be available at this place. I handle this using an event script that fires for NotePreSaveXml and copies the DTD to the folder of the original document.
As I always use XSL postprocessing and using XSLT1 it is not possible to have the doctype-system as a parameter I have this in my XSL stylesheet:
<xsl:output doctype-system="some.dtd" />
For the resulting XML the DTD is expected to be in the same folder as the XML file. This is handled by the same event script as above, it therefore copies the DTD to the source and the target folder.
Bottom line: If you want/have to use UNC paths, you have to do some programming to work around a FrameMaker bug.
- Michael

Correct Way to Obtain The Most Negative Double

Is this the correct way to obtain the most negative double in Java?
double v = -Double.MAX_VALUE;As Max positive byte is 127, but Max negative byte is -128, not -127
        byte c = 127;
        byte nc = (byte)(c + 1);
        if (nc > c) {
            System.out.println("+ve");
        else {
            // Come here.
            System.out.println("-ve");
        }However, how about double
double v =Double.MAX_VALUE + 1;
Is this makes sense? As, 1 is not the smallest increment unit for double.

yccheok wrote:
Is this the correct way to obtain the most negative double in Java?
double v = -Double.MAX_VALUE;
Double.MIN_VALUE;
However, how about double
double v =Double.MAX_VALUE + 1;
Is this makes sense? As, 1 is not the smallest increment unit for double.No, 1 is not the smallest unit to increment a double with, the smallest unit of course would be negative infinity. Remember double has a fixed precision, so even if negative infinity existed, it would not be accurately represented by a double.
Mel

Sapinst - what is the correct way to startup sapinst

I am starting install of NW04 on unix. The install manual states that once env paramters are set then do the following:
cd /SAP_MASTER_DVD/IM2/SAPINST/UNIX/SUN...
then run ./sapinst
however run I run it it just waits.....
I then go back in another session and run startInstGui.sh
and the sapinst install screen successfully appears?
Is this the correct way to run the install?
What is the correct way to run sapinst?
Thank
John Ryan

Figured it out...
sudo su root not - root
and it works

The BEST way for recharge iPhone4.

Hy to all!
My answer is:
Which is the BEST way for recharge the iPhone4?
When the battery is completely to %0 or not?
Finally, the iPhone when is in recharge mode, the best way is that it is turned on or turned off? Because if it's are turned off, how i understand that are 100% recharged?
Thank you!

Garydp wrote:
I agree that you can't charge while off unless it is completely flat. Even then when it has charged for a while the phone switches back on. Just tried again to make sure and as soon as I plugged the charger in the phone turned on.
Hi, Actually an iPhone can be charged when off at any time, not just when totally exhausted. It is true the the phone will turn on when plugged in if it's off to begin with, however, if it is turned off after being plugged in, it will indeed charge. This is how I habitually charge mine overnight.
Regards, R.

What's the best way to recharge my ipod?

Do I have to wait the battery to end completly, or can I recharge the battery any time?
What's the best way to recharge the battery, so it will last for a long time..

Lithium ion batteries don't require much special handling. Charge them when ever you want. You don't have to wait until they discharge completely. In fact, the one thing you really shouldn't do with a lithium ion battery is drain it completely and let it sit that way.
Best of luck.

Some questions about writing rc.d scripts the right way

Hello everyone,
I'm setting up an environment and have a number of server daemons that I would like to automate the startup of, so I'd like to write some rc.d scripts for them. Now, I could just go ahead and roll my own but I thought I should try to learn the correct way of doing this.
I have already read the wiki page (https://wiki.archlinux.org/index.php/Wr … .d_scripts) and have used the example there as a starting point, I have a working script that starts a daemon. However I have some questions...
How do I handle the case where the daemon's name differs from the running process? Once case I have is to start up a web server for ruby documentation. The process I need to start is "gem server" but what is listed in ps is "ruby ... gem server". Starting works just fine, but when trying to stop it the rc.d script uses "pidof gem" to locate the daemon which fails because there is no such process (it's ruby) so stopping the daemon fails.
My second query is how to handle multiple daemons that differ only in their arguments. I don't think the rc.d script can handle this. I would like to run several of these "gem servers" for different trees of development.
I may be better off in this case just writing my own thing to do it.
Any help and advice appreciated...

Yeah, look elsewhere.
find / -name \*.pid
Edit: an example:
PIDFILE=/var/run/named/named.pid
It's in a subdirectory, so that the user that BIND runs at, has permission to create and remove the pidfile from that directory.
One thing to bear in mind, when stopping a daemon, is that it might not stop immediately. E.g. lighttpd, when asked to do an orderly shutdown with:
kill -TERM $(pidof -s /usr/sbin/lighttpd) 2>/dev/null
Cannot be immediately checked in the initscript. My erm, workaround for that is to just assume that it got the message
Last edited by brebs (2012-03-07 13:49:17)

Some questions about the integration between BIEE and EBS

Hi, dear,
I'm a new bie of BIEE. In these days, have a look about BIEE architecture and the BIEE components. In the next project, there are some work about BIEE development based on EBS application. I have some questions about the integration :
1) generally, is the BIEE database and application server decentralized with EBS database and application? Both BIEE 10g and 11g version can be integrated with EBS R12?
2) In BIEE administrator tool, the first step is to create physical tables. if the source appliation is EBS, is it still needed to create the physical tables?
3) if the physical tables creation is needed, how to complete the data transfer from the EBS source tables to BIEE physical tables? which ETL tool is prefer for most developers? warehouse builder or Oracle Data Integration?
4) During data transfer phase, if there are many many large volume data needs to transfer, how to keep the completeness? for example, it needs to transfer 1 million rows from source database to BIEE physical tables, when 50%is completed, the users try to open the BIEE report, can they see the new 50% data on the reports? is there some transaction control in ETL phase?
could anyone give some guide for me? I'm very appreciated if you can also give any other information.
Thanks in advance.

1) generally, is the BIEE database and application server decentralized with EBS database and application? Both BIEE 10g and 11g version can be integrated with EBS R12?You, shud consider OBI Application here which uses OBIEE as a reporting tool with different pre-built modules. Both 10g & 11g comes with different versions of BI apps which supports sources like Siebel CRM, EBS, Peoplesoft, JD Edwards etc..
2) In BIEE administrator tool, the first step is to create physical tables. if the source appliation is EBS, is it still needed to create the physical tables?Its independent of any soure. This is OBIEE modeling to create RPD with all the layers. If you build it from scratch then you will require to create all the layers else if BI Apps is used then you will get pre-built RPD along with other pre-built components.
3) if the physical tables creation is needed, how to complete the data transfer from the EBS source tables to BIEE physical tables? which ETL tool is prefer for most developers? warehouse builder or Oracle Data Integration?BI apps comes with pre-built ETL mapping to use with the tools majorly with Informatica. Only BI Apps 7.9.5.2 comes with ODI but oracle has plans to have only ODI for any further releases.
4) During data transfer phase, if there are many many large volume data needs to transfer, how to keep the completeness? for example, it needs to transfer 1 million rows from source database to BIEE physical tables, when 50%is completed, the users try to open the BIEE report, can they see the new 50% data on the reports? is there some transaction control in ETL phase?User will still see old data because its good to turn on Cache and purge it after every load.
Refer..http://www.oracle.com/us/solutions/ent-performance-bi/bi-applications-066544.html
and many more docs on google
Hope this helps

Hello , I want to ask some question about ipads \ How powerful is the iPad? How useful is it for reading books, newspaper or magazines or for surfing the web? Can you identify any shortcomings of the device? please help me :(

Hello ,
I want to ask some question about ipads \
How powerful is the iPad?
How useful is it for reading books, newspaper or magazines or for surfing the web?
Can you identify any shortcomings of the device?
please help me

it's less powerful than your average computer. THink of it like a netbook but with a better processor.
It'll do fine for surfing (although if you browse a lot of flash based sites you will need to get a third party browser since safari doesn't accommodate it)
You may do OK on reading books, papers or magazines, especially if they have apps, but the ipad's screen is backlit, so it doesn't work well outdoors and you may need to fiddle with the brightness so that you don't get eye strain (it's just like doing too much reading from a computer screen)
I would say the biggest short comings are data transfer. Apple's preferred work flow is that everything is done via iTunes or the internet....well people dont' always have 100% reliable always on internet access so you can find yourself in a situation where you can't get things on/off the iPad.
By and large, it's a good device for day to day stuff, but is not a computer replacement.

Some questions about the correct way to recharge the zen micro batt

Similar Messages

Maybe you are looking for