Some users hang

Dear all,
I am using oracle9i Database and oracle10AS sometimes if there is a problem in the power certain users hangs I don't know what is the problem with those users
please help me in solving this issue
regards

Can you explain the following further please.
sometimes if there is a problem in the power certain users
hangs I don't know what is the problem with those
please help me in solving this issueCan you identify the issue, more than "certain users hangs"?

Similar Messages

  • Sharepoint Foundation - search working for some users (or computers), but not others

    Hi all,
    We have doozy of a search problem with SharePoint Foundation 2010 that I'm hoping someone can help with.
    We have an application that is listening on port 14197 and search is working just fine, but only for one or two users.
    If I do a search while logged in using the account we set the application up with then the search works fine and it returns records as expected.
    If I use a different account - one that has full control over the app, then the exact same search fails with the following message:
    We did not find any results for 06BSL.
    Suggestions:
    Ensure words are spelled correctly.
    Try using synonyms or related searches.
    Try broadening your search by searching from a different site.
    Additional resources:
    Get additional search tips by visiting Search Help
    If you cannot find a page that you know exists, contact your administrator.
    We've done everything we can think of, including several procedures to create new search accounts, replace databases, etc.
    Nothing has helped and all of the info we can find online is in relation to getting search working when it doesn't work at all.  In our case it is working, but only for some users.  We thought it might have been a permissions issue, but not matter
    what permissions we seem to give to test accounts they still don't work.  We've set up a test account, for example, that is a member of the 'application owners' group, but cannot produce any search results with it.
    The SharePoint Foundation server is running on Windows 2008 Server Foundation, with a separate SBS 2003 DC.  
    Any help most appreciated.

    Hi Alex, thanks for your response and apologies about the late reply - didn't realise someone had responded until now!
    Agreed that this looks like a permissions issue, but we're stumped as to what it could be.  The 'test' account displays this problem - if we try and search on 06BSL
    we get no results, but it does appear that this account has full control over this document (see below).
    Note that the 'Manage Permissions' page presents a comment 'This list item inherits permissions from its parent. (Customer QA & Product Management)' which is what we're
    expecting.
    The indexing schedule is set to 5 minutes. 
    Appreciate your help with this, as we've spent a huge amount of time on this problem but don't seem to be any closer to a resolution.
    Cheers,
    Damian
    Check permissions result (this result is the same for the list or for the document itself):
    Permission levels given to test (DOMAIN\test)
    Full Control
    Given through the "QA Application Owners" group.
    Design, Contribute, Read
    Given through the "QA Application Members" group. 

  • OID can not display some users - java.lang.ArrayIndexOutOfBoundsException:0

    We have set up AD to OID synchronization for users and groups using Import connector, and it worked fine. The users in OID can log into applications protected by OAM. But recently I found that some users that could be displayed in OID before can not be displayed now. If I click on the DN in Oracle Directory Manager, a error window pops up. It is a long error message, and the first a few lines are as follows :
    0
    java.lang.ArrayIndexOutOfBoundsException:0
    at oracle.ldap.admin.AttrOptions.<init>(entry.jave:3151)
    at Oracle.ldap.admin.Entry.getProp(entry.java:457)
    I don't see any error message in the integration profile or log files. I am testing things on an account that is having this trouble, and the strange thing is that it can not log into application protected by OAM any more, but it can log into OAM console.
    We use OID 10.1.2.3 on Windows, and OAM 10.1.4.0.1.
    I searched in Metalink but didn't find anything helpful. Any help is appreciated. Thanks for your time.
    Hailie

    Pramod,
    Thank you for your reply. Please see below my answers to your questions:
    -> Do you see any pattern in the users (DN) that are unable to be displayed/login?
    Yes I do see some pattern. There is one change on the problem user's dn - the "\" after the last name is gone.
    Before: cn=smith\, john, cn=users,dc=abc,dc=com
    Now: cn=smith, john, cn=users,dc=abc,dc=com
    However I check in Active directory "\" is presented. In OID if I right click on cn=smith, john and try to delete it, I got a error message "LDAP: error code 34 - Error in DN Normalization". Is that caused by the missing of "\"?
    -> Does ldapsearch on these users (with all attributes) show something (special chars, etc)?
    ldapsearch on cn=cn=smith, john,cn=users,dc=abc,dc=com returns no objects:
    $ldapsearch -L -D "cn=orcladmin" -w "*****" -h host -p 389 -b "cn=smith, john,cn=users,dc=abc,dc=com" -s sub "objectclass=*"
    ldap_search: No such object
    ldap_search: matched: cn=Users, dc=abc,dc=com
    Ldap search on cn=smith\, john,cn=users,dc=abc,dc=com:
    $ldapsearch -L -D "cn=orcladmin" -w "*****" -h host -p 389 -b "cn=smith\, john,cn=users,dc=abc,dc=com" -s sub "objectclass=*"
    dn: cn="smith, john",cn=users,dc=abc,dc=com
    uid: [email protected]
    employeenumber: 916963
    cn: smith, john
    registeredaddress: 512
    krbprincipalname: [email protected]
    orclsamaccountname: ABC.COM$JSmith
    sn: johnsmith
    displayname: John
    orclobjectguid: lJO0N+8H4UW/30yHukSfsw==
    orclobjectsid: AQUAAAAAAAUVAAAAohxTYWIV3XFeP55cYjwAAA==
    orcluserprincipalname: [email protected]
    objectclass: oblixorgperson
    objectclass: inetorgperson
    objectclass: orcluserv2
    objectclass: person
    objectclass: orcladuser
    objectclass: organizationalPerson
    objectclass: top
    obver: 10.1.4.0
    -> Do you see the same behavior when you use any generic LDAP browser (Ex: Apache Directory Studio) instead of ODM?
    I don't have Apache Directory Studio installed yet. I will try that later.
    -> Does the changelog for the particular synch (for the affected users) show something?
    Here is what I found in ActiveChgImp.aud
    (weeks ago)
    97426524 : Success : MODIFY : cn=smith\, john,cn=users,dc=abc,dc=com
    (Recently change - The back slach after smith was gone, and "" showed up)
    97469970 : Success : MODIFY : cn="smith, john",cn=users,dc=abc,dc=com
    -> If login to OAM is possible, can the user modify his/her profile, and does it save the changes? If it does, can you try logging in to apps?
    This user can log into OAM identity system, but when I click on "My profile" under "User manager", I got a error message "You do not have sufficient access rights".
    If I log into identity system as orcladmin, I was able to modify it and save the changes. But in OID the user is still not displayed. Same error message. When I tried to add it as administrator, I could search on it, add it, but when I press "done", it didn't show up on the admin list. The users that can be displayed in OID can be added to admin list without a problem.
    Thanks,
    Hailie

  • I transferred files from a NAS server to the Mac Mini Snow Leopard Server and now some of the files have Custom Access and can't  be opened by some users.  How do I fix this?

    We're setting up our Mac Mini Snow Leopard Server, and in the process transferred files that had been stored and accessed from our Blackarmor NAS server over to the Mac.  These files were all created on PC's and are Office Excel files, WordPerfect files or PDF's.  When you look at the files on the Mac from the Mac and bring up Get Info for the affected file, it says that the file has Custom Access.  The files that work properly don't have that configuration.  I can access and open the files on some computers, but some users can't open the files from their computer even though they can see it.  We're all using PC's and they get the Error:  Access Denied-Contact your administrator--or something similar.  I've seen on the web similar issues and it may have something to do with ACL permissions.  I don't know enough about Mac OS to understand this, but what is baffling is that they can be opened from some PC's but not others, and all of the Users have the same accessibility to the files.  Thanks for a solution!!

    Oh, on the losing Internet, try this...
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.7 & 10.8…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
    For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
    208.67.222.222
    208.67.220.220
    Click OK.
    PS. Your English is quite good & completely understandable.

  • Adobe Premiere Pro CC launches for some users, but crashes for others.

    I am troubleshooting an issue in a college computer lab. Adobe Premiere Pro CC launches perfectly for some users, but crashes for others. All computers are joined to a domain. The program launches successfully under faculty and admin accounts. It launches under my student account and will launch for some students in the class. There are, however, some students who cannot get the program to launch. Each time it fails when attempting to load ImporterQuickTime.prm.
    For these students, the following error appears:
    Adobe Premiere Pro CC has stopped working
    Check Online for a solution and close the program (Tried this nothing seems to come of it)
    Close the program
    I clicked View problem details
    Problem Event Name: APPCRASH
    Application Name: Adobe Premiere Pro.exe
    Application Version: 7.2.2.33
    Application Timestamp: 532c3999
    Fault Module Name: dvaui.dll
    Fault Module Version: 7.2.2.33
    Fault Module Timestamp: 532bed86
    Exception Code: c0000005
    Exception Offset: 00000000002d31c1
    OS Version: 6.1.7601.2.1.0.256.48
    Locale ID: 1033
    Additional Information 1: 3272
    Additional Information 2: 32722596c6b4441ac0840ed9743cbfbb
    Additional Information 3: 3e22
      Additional Information 4: 3e2260f0a53760c20f23c7e2675c1736
    I did check Quicktime and it is not updated to the most recent version. However, if it was a result of Quicktime not being up to date, why can some accounts launch the program while others cannot. I have also updated the graphics driver on one computer. No change. I compared my student Active Directory account to that of one student who could not launch the program. They are in exactly the same place in AD and therefore have the same permissions on the domain. This is a puzzling issue and the instructor is getting frustrated. Any help or suggestions with this matter would be greatly appreciated.
    -Barb

    I have no idea, other than what I said about the program's design requirement for an Admin account and "sometimes" problems on any other account
    About the only thing I can suggest is a "remote control" chat session... when a student with a non-working account is having problems
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • Jabber voice mail for some users.

    Dears,
    J4W voicemail works perfect with default config.xml file for some of the users and for some of the users it shows the attached when clicked on voicemail tab. I have create 2 no's of sevice profile, the voice mail credential set  for both service profile is Unified CM IM and presence.
    I can understand the prompt as it is asking for voicemail password for that reason i have to create a custom config.xml file and i have to upload in TFTP server, But my concern is why it is working for some of the users without config.xml file and for some users it is prompting for username and password.
    Thanks

    Dears,
    the profile are different, but if i put the the other users working profile also it is not working.
    The voice mail server is showing not connected in jabber,
    Any hints.
    Thanks

  • Restrict the posting period opening and closing for some users

    Dear SAP gurus,
    I want to restrict some users to open the posting period and for some users close posting periods. I knew that these can be done through authorization group. Pls explain how to create authorization groups and how to use those?  Anybody can help me out?
    Regards,
    Venkata Reddy

    Dear Venkatareddy,
    There are two sets of period in OB52. The first set of "From" and "To" is for the authorised group and second set is for the non authorised group. In the "Authorisation Group" (last column) give some 4 charecters name. Say "FICO".
    Now ask the basis to attach the object "FICO" for the users who are authorised say user1, user 2 and user3.
    Now in the first set of period you can maintain say 1 2008 to 16 2008 and in the second set 1 2008 to 1 2008.
    So except user1,2 and 3, all the others can post only in 1 2008. Whereas users 1,2 and3 can post in all the periods of 2008.
    Assign points if useful
    regards
    Venkatesh

  • Icon display in Module pool screen not visible to some users

    Hi,
    I have added an icon in one of the module pool screen with dynamic quick info.  The page is rendered fine and the info is also displayed well for most users except some.  I can't figure out why the icon is not being displayed for some users.
    Do someone has any solution for this?
    Thanks,
    Sumith

    As I recall, the icons are actually stored in a file on each PC so some users may have a corrupted or out-of-date file with the icons.  You can look for posting on "how to add an icon" to see a discussion on this topic.
    I found some useful info at:
    Create and Add Icons to table ICON?
    Message was edited by: Charles Folwell

  • MAM application is not working for some users

    Hi All,
    Tha MAM application is not working for some users.Different users have different workcenters other than that I dont see any other change. When I run MAM30_090_GETLIST in the backend I can see the no of customized users.But I cant see same no of users in the MEREP_207 table for the Syncbo MAM30_090 and strcture id TOP in the middleware. There is a data when I checked under worklist monitor for that user. But neither the MAM application nor MAM data is downloading to that device.
    If I use different user on the same device I can see the MAM application and MAM data.
    What could be the wrong in this case. Any help would be highly appreciated.
    Mobile Client:MI 70 SP 15 Patch 0 Build 200802280918
    Middleware:SAP NetWeaver 2004s with Patch leve 15
    Backend:SAP ECC 6.0
    Application:MAM 3.0
    Thanks and Regards,
    Ameer.

    Hi,
    from your description the source of your issue is quite obvious: some of the MAM users configured in spro are not configured properly.
    For T01 SyncBos the number of TOP records in merep_207 MUST be the same as number of headers returned by an appropriate getList FM in the backend.
    You need to solve this before you can go any further.
    Reason why a record is not recorded in MEREP_207 - getdetail failed for whatever reason. So execute MAM30_ML_getdetail for each of the users that is not replicated in the middleware and check if there are errors in RETURN table. If there is no error - one of the common reason for replication fail is when there are records in item tables that have duplicate primary keys.
    Regards,
    Larissa Limarova

  • Report Error only for some users - Unsupported RPL stream version detected: 101.116.1047292257. Expected version: 10.6.

    Hi,
    We have certain SSRS report  (which includes subreports) which
    many users are able to access, but
    some users cannot access- they get this error:
    "Unsupported RPL stream version detected: 101.116.1047292257. Expected version: 10.6."
    (We are not using SP integrated mode)(using SSRS 2008 R2)
    No problem in VS or on server when trying to run this report.
    User having this problem has the sam ewindows and explorer versions.
    Please advice
    Namnami

     have the user clear their temporary internet cache
    How? 
    Another detail- on the problematic user's computer if I run the explorer using my credentials, the report runs fine. 
    Thanks
    Namnami

  • No Data in Report for some users in Discoverer Viewer

    Hi we have some users for discoverer reports .The report show data to Admin user. But if the same report is run through any other user id , it displays 'No data is available'. the report is shared to the user, Proper grants on the table is given and also the user is given access to Business Area. It has been an issue only from last week before that it was working fine . There was a data dump taken from the database last week , would that be an issue ? not sure what DBA has done ..The same report is able to run through the user logins in Discoverer desktop tool .The issue is only when accessed via Discsoverer viewer
    Edited by: 801473 on Oct 11, 2010 4:59 AM

    HI Preetham,
    You can take a look at the selection and identification you have made in the multiprovider definition. Most of the cases of a multiprovider report not fetching any data relates to missing identifications of base chars.
    For testing purpose also try to include the the InfoProvider in your query so that you can see what data somes from which base cube.
    Hope this helps...

  • Some users can't open Excel files. It is trying to open it in Internet Explorer "An error has occurred. Please try again."

    I have some users in my company that can't open Excel files from any document libraries on SharePoint 2010. The receive the error message "An error occurred. Please try again."  We don't currently use the Excel calculations services. When
    a user opens an excel file they are prompted to either Read Only or Edit.
    This affects less than 5 people in a large company.  They have the Full Control permissions and have been able to open the files previously.  There has been no changes made to the server either.  I can't find anything that points to this in the
    event viewer. 
    It doesn't matter if which computer that they try to open this up from either.   All computers are Windows 7 Professional with IE 9 and Office 2010 x64.   
    I can't find anything that points specifically to this exact error. None of the excel files contain pivot tables.    This one has me stumped.

    I would make sure no one has open on machine / locked on machine (Would assume you checked this, but wanted to add)
    Also would have assumed you restarted the machines (:))
    Make sure the file security did not change (check to ensure no one changed the sercuity of the excel)
    Make sure the version of excel is the same (Changing from 2010 back to 2007 affects the file, etc.. on convert) that no one converted and saved thus causing error in file.
    Can they open other excel files?
    It sounds like the excel file it self has changed if you cannot see issue in SharePoint logs.
    If it is all SharePoint excel files - try deleting one persons access and readding them to see if that helps.
    SharePoint has issues ;)

  • How to see, if some user has done multiple login at the same time

    Hi,
    i'm looking for a tcode to see, if some user has done multiple login in a date-range.
    Regards, Dieter

    It is also dependent on your license type, as it is populated at logon - prior to any Z-coding option - which will cause a lockout if attempted an access that way.
    I recently found a cool way to detect DB triggers and updates - very obscure...
    However I also "move around" during support in projects and don't always want to kick myself out. I guess SAP can "work-it-out" from the various fields of the table to map the user behaviour.
    Personally I dont believe that all of such information is appropriate for public domain, as all the SAP_ALLers out there combined with the types of authentication options are not always responsible with the information either.
    Thankfully, SAP has added a "salt" to the password hashes now. They offer RZ11 login/password_downwards_compatibility as a workaround...
    Take a look in your system!
    Cheers,
    Julius

  • How to Block Account member in input reporting for some users?

    Hi experts, i need to know if is possible to block input of values for some Users in the Account Dimension so that some users can input value in the report but other user cant do it.
    I try to do this from "member access profile" but this option only allow you to define access right for one specifict parent o member.
    I mean, is posible to asigned to Account Dimension a Propertie type "OWNER" like ENTITY?
    For example: one user must to input value for the Account member "CASH", but other user dont, however i have to show the same input reporting for both users.
    I hope understand the question, im sorry about my english
    thank you in advance
    Ignacio Vazquez

    I would think you could do one of the following:
    Either set account as a secured dimension.  You would then define security profiles for all account groups and assign those to your users / teams as appropriate.  Would take a while to setup initially, but if your users don't change that much it shouldn't be too difficult to manage once it's done.
    Setup different input templates that only showed the accounts you wanted each group of users to see.  Put the templates in different site folders and assign access to those sites as required.  users would then only have access to open the template applicable to them.  Would require that you basically make duplicate copies or your current template, modify and save to different site folders which could become a pain if the template requires changes (since you would now have to make the same change multiple times).
    Setup a macro in the current template so that you need to enter a password to unlock the send commands for the respective accounts.  I don't know if it can be setup to support multiple passwords - assuming it can, password 1 would unlock all accounts, password 2 would only unlock CASH accounts, password 3 would only unlock LIABILITY accounts, etc.  You then distribute the passwords to the users as appropriate.
    Hope that helps.

  • Installed mavericks server and now some users don't have access to folders!? Why and how do I fix it???

    I have just upgraded the server and os to mavericks and now users that used to be able to open and save or even log in are now locked out with the server saying wrong password. I reset their password and still nothing. I created a new user and they can't even log in? Why now? And how do I fix this. It seems that some users and groups now don't have access and all that was done was to let the group open a shared folder that they have access before. I reset everything and am now very frustrated!!!

    Hi
    Seem to be an issue with Maverick
    After trying to solve the issue with all tips i found here and on the net
    I decided to go back to Mountain Lion for my server using TimeMachine backup, and stay with Maverick for my imacs
    Work well again
    Until Apple will communicate on it or deliver a patch, i would suggest to do the same

Maybe you are looking for