Something is wrong

Safari is broken and no one will convince me other wise. Painfully slow page loads, most pages not completely loading, interminable delays and no domain forwarding. Since my 10.4.3 update, Safari ***** and my Powerbook *****.
That's just the plain truth. I am a fastidious housekeeper and I manitain my system with due diligence. My workflow has been cut by two thirds if not more.
I have a 1.4 meg DSL connection and I swear to god dial up was twice as fast.
At least the page fully loaded. Why must I click on the stop loading button to see the page I want to see? I am typing this on a page that has stopped loading and shows 22 errors and loaded 27 of 47 itmes. In the activity viewer
alomst every Apple button .gif shows a timed out. Very very frustrating to say the least. It's as if a time bomb was planted on my system on November 23rd.

Absolutely, Safari is broken on your particular
installation. Safari and OS X 10.4.3 simply do not
exhibit this behavior in a normally functioning
installation. No matter how carefully one maintains
their system sometimes **** happens.
You might try re-applying the OS X 10.4.3 update
using the combo updater. Be sure you run Disk Utility
first, verify your boot drive and repair permissions.
Go to ~/Library/Caches and delete the entire Safari
cache folder. Make sure any and all third party
Safari enhancements have been
uninstalled.
Dual 2.5GHz
G5 Power Macintosh Mac OS X (10.4.3)
1.5GB RAM
I do not nor ever have run third party enhancements. Second, I run Disk Utility and Tech Tool Pro 4 to check volume and disk structure. I run permissions before and after every update/upgrade. I have reapplied the Combo Update previously to now avail. I have reset Safari, deleted cache and plist Safari Preferences. Other than a full blown reinstall, I have done everything I know or read about to solve the problem. I will tell you on my home Power Mac with the same configuration, Safari seems more stable but still slower than I remember it being. The domain name issue is a problem in Safari on both machines. Since the Update 10.4.3 I have perceived a slowddown across the boards on both machines. Maybe just a perception due to my frustration.

Similar Messages

Restore iphone 4 to install the ios 5 but something went wrong while doing back up and whenever i connect the phone to itunes theres an error and the phone turn off after 1min

hi guys i just downloaded the ios 5 and while it was doing back up something went wrong and everything were stopped and shows me a message as an error msg and now whenever i connect my iphone 4(32g) to itunes after 1min it goes off and the battery full and the same thing happend again and again can u help me guys plz i only see connect to itunes on the screen no options even

by reset option do you mean the DFU restore? worked for me, have you tried that?
if not - hold the lock and home button until the power down bar comes up. then hold the lock button for ten seconds - next continue to hold the lock button and press the home button for ten seconds - next release the lock button and hold the home button for 10 seconds. this should be done with the phone tethered. If done right and your itunes is configured as such, the phone will reload the drivers and start up itunes, and then prompt for a restore/update.

Sorry, something went wrong - Open Office File from Search Results Page with Office Web Apps

Hi,
I'm getting "Sorry, something went wrong" error when I'm trying to open any office document from inside Search Results Page with Office Web Apps, the same error is appearing in the document preview as well.
The error in SharePoint logs says that the file cannot be found.
Please note that this error is coming only when the "Filename" of the document is not written in English (in my case its written with Arabic characters).
If I try to open it from the document library, its opening properly with no errors.
The only difference between two URLs (document URL in Search Results and in Document Library) is the value for "sourcedoc" attribute;
In the case of Search Results page, the filename in "sourcedoc" attribute is kept as is with Arabic characters.
While in the Document Library, the filename in "sourcedoc" attribute is converted into different characters (something like: "B9%D9%85%D9%8").
Anybody have an idea on how to overcome this issue, implement a workaround or modify the "sourcedoc" behavior?
Thanks in Advance.
Hamza AlSughier

Dear Wendy,
Thanks for your efforts, I already tried your last suggestion before, but this didn't solve my problem.
Actually my end users are accessing this portal using ADFS and HTTPS.
Finally I got this solved, I have done below to get my overall solution working perfectly:
- First I have configured Windows Authentication and ADFS Authentication on the same zone which is the default zone.
- The issue when opening office documents with Arabic file name has disappeared as a result of first change.
- Then I have faced an issue where we are not able to crawl content under Default zone, however we have to do so, after too many efforts, I found that its related to the Load-balancer/proxy, I have made the crawler server
to crawl himself (http://CrawlServerName:PortNumber).
- Also a change on Alternate Access Mapping was needed, I have set one of the extended zones (which is running Windows Authentication only) as Internal URL for the Default Zone, and this is was the URL I used for Crawling.
I have configured Server Name Mappings to make sure we got proper URLs in Search Results.
- Then we faced another issue, which is Authentication selection on login page (How to bypass this page, and authenticate using ADFS auto), I used this solution (Set Custom Sign In Page):
http://0ut0ftheb0x.wordpress.com/2014/01/04/skip-the-authentication-selection-page-at-_logindefault-aspx-in-a-mixed-authentication-environment/.
- I faced one more issue as a result of above workaround; Sign Out functionality wasn't working well; users get logged in automatically whenever I click on Sign Out. I solved this by modifying the "Sign Out" Control under _layouts;
I made it to redirect users to ADFS Sign Out Page instead of SharePoint Sign Out Page (I know its not recommended, but I don't have any other option).
Hamza AlSughier

Creative Cloud Packager - "Oops Something went wrong ..." Service down?

I have been trying to use the Creative Cloud Packager application for two days to download and package an app. It is refursing to connect to Adobe and all I get is a criptic something went wrong try again later message.
I am an Enterprise customer and am using the most recent version of the packager available in my enterprise account download account.
Please let me know what other information I can provide.
Thank you.
- Lynna Jackson, Williams College

Hi,
Download and Install Adobe Application Manager, launch it and let it update itself. Then you should be able to close Application Manager and open Creative Cloud Packager. That worked for me
--=Thanks!
--==Trey

When I try to connect my iphone to itunes it will not work, but when I connect an ipod it will. This is telling me something is wrong with my phone I am jsut not sure what that is. Can someone help me.

I was trying to update my music last night. But itunes told me it needed to be updates first. So I updated itunes, and my phone. But now when I connect my phone using the usb. It will not connect to itunes, all that comes up is a phone icon on my desk top(which doesn't allow me to do anything with) But when I connect an ipod it does connect to itune and I am abble to look at how much room is left, and the option to restore ect) . SO this tells me something is wrong with my phone it self. Does anyone know what I can do to fix this problem?
Thanks.
PS my lap top is running the new windows 8.

Hi,
Start Here:
http://www.apple.com/support/iphone/assistant/phone/
And See Here:
http://www.apple.com/support/iphone/syncing/

Sharepoint 2013 foundation central admin "something went wrong"

I recently installed SP1 (the bad version before it was pulled) on my SharePoint 2013 foundation server. I ran psconfig and made sure my databases were up to date after SP1. I checked central admin after psconfig and everything was working and good to
go. I have little need to access it on a regular basis, so after the install I haven't attempted to access central admin for approximately a month. As the updated SP1 just hit a few days ago I attempted to pop into CA to does some work on the site in preparation,
and I received the sorry something went wrong message. I thought it may be an issue due to the bad version of sp1 that was installed and/or high ram utilization. As this is a standalone box in production I could not reboot easily. I was finally able to do
the install last night, and it appears the problem is still ongoing. The site has been in production for about 6 months now, I have never had any issues hitting CA previously. SharePoint is running as a VM, and we have decked the specs out for it. We are allocating
4 cores and 24gb of ram to the site, and we are not seeing anything close to max resource utilization on the hypervisor or on SharePoint. I checked the correlation ID that SharePoint provides in the ULS logs and the only thing close to an error I get is a
message "cannot find site lookup info for request uri
http://localhost:<port binding>/." this is followed by "Application error when access /, Error=Exception of type 'System.ArgumentException' was thrown.". I'm exporting a copy of the vhd to experiment on in a test environment now, so
I will update this if I get more info. I don't think this was caused by SP1 as I was able to hit the CA page after doing the upgrade, but other than standard users interacting with the site since SP1, there have been no changes from an administration perspective.
I am the only one who touches the site here so I know changes weren't made without my knowledge. Anyone have a clue what could be causing this?

I see, good to know. IT couldn't have been someone visiting the CA page turning it on, as its an IIS only setting. I cant say that no one ever would have changed the settings, but generally I am the administrator for this server and my colleagues don't touch
it.
When I say default content pages I mean my SharePoint site collection pages. The problem I was having when I started this thread was about CA, but I also noticed on my site collection that FBA is turned on as well. When I turn this off a few things
happen, generally I get a message around authorization saying that the site collection admin or farm admin cannot view the page. On the few occasions I am able to login, the page content often renders without any css, so its just plain text on the page, or
it places the text in random locations around the page. Generally when I try to navigate though I just get an access denied message shortly therafter. Keep in mind I have done absolutely no setup at all around FBA, so I'm not sure why turning off an authentication
method that has not been configured at all would not allow me to access my site pages.

Workflows completes but goes to "Sorry something went wrong" page

SharePoint Version: 2013
Workflow Version: 2010
My Title: Junior SharePoint Administrator
I have been working weeks on a project to use workflows for a business process. It is as simple as setting variables and sending email to people.
I have successfully created a site workflow and published it. When I start the workflow, it starts fine but then show me this (very annoying and always unhelpful) error --> Sorry,
something went wrong. An unexpected error has occurred.
Funny thing, the workflow stills completes fine and I get the email notification I created in the workflow! No errors messages in the workflow history either - completely clean.
Is there any reason for this? I am concerned since it will be used by a large group of people monthly and this is a huge "NO" for UX experience and usability...
I have tried linking the Correlation ID to anything and looking through server logs. I have got nothing.
Help please? :)

get the time that the error occurs, and recheck the log file that during this time, whether there is related information.
what's your workflow do? what's the result by using other user account to start the workflow.
Qiao Wei <br/> My blog:<a href="http://blog.goobol.com">http://blog.goobol.com</a>

Since iOS 7.1 my phone won't turn on and is asking me to connect to iTunes. I connect to itunes and it says it needs to be restored. Not sure why. I try to restore it and then it says something went wrong and it won't work. So I've been without my phone

Since iOS 7.1 my phone won't turn on and is asking me to connect to iTunes. I connect to itunes and it says it needs to be restored. Not sure why. I try to restore it and then it says something went wrong and it won't work. So I've been without my phone for a couple days now. It gives me error code (29). The phone almost reboots and then 3/4 of the way through it gives me the error message.

If using windows...
Temporarily disable your firewall and antivirus software and try again...
http://support.apple.com/kb/TS1379
See iTunes Connection Issues here...
iTunes for Windows: Troubleshooting security software issues
NOTE:
Make sure you have the Latest Version of iTunes (v11.1.5) Installed on your computer
iTunes free download from www.itunes.com/download

After clicking "yes" to the question "do you want to update itunes now", i waited 2 hours and 15 minutes and it was still "loading". i turned computer off thinking something was wrong. now itunes won't open at all. do i need to download itunes again?

after clicking "yes" to the question "do you want to update itunes now", i waited 2 hours and 15 minutes and it was still "loading". i turned computer off thinking something was wrong. now itunes won't open at all. do i need to download itunes again?

Did you actually download the installer from Apple or did you use Software Update. You can download the installer http://www.apple.com/itunes/download/
Maybe I'm old fashioned but I would consider repairing permissions first using Disk Utility because something caused this to go wrong the first time. And of course make a backup of your whole library first. It shouldn't happen but some have complained about their libraries being wiped out by iTunes updates. Better safe...

Office 2013 - Something went wrong (no kidding)

New x64 machine running Office Home & Business 2013 x86 OEM.
Originally, everything was running fine. Installed fine, set up fine, and ran fine. Inexplicibally, user calls stating when running ANY office app, it states "Something went wrong" and would not open (computer was only a few days old, no other
mods/installations).
Tried:
Online Quick Repair (same error)
Online Full Repar (same error)
Removal of product via KB2739501 (removed fine, now won't install)
Now product is removed. Ran FixIt KB2739501 twice and even removed Office folders in programs dir. When attempting to run ClickToRun installer, i get "Something went wrong". Really?
Tried x86 and x64 ClickToRun, no dice. Currently downloading the insanely massive offiline installer (because for some reason MS bundled x86 and x64 together... totally bright), but don't have any faith. User has been without Office apps for days. Scouring
net notes MS has a recognized issue with the installer process and licensing, but various fixes that worked for others, doesn't work here.
Any thoughts?
Thanks,
Jeremy

Hi,
The first step I suggest is to start Office Apps in Safe Mode, check if the crash will happen.
Let's take Outlook for example:
Press Win + R and type “outlook.exe /safe” in the blank box, then press Enter.
If there’s no problem in Safe Mode, disable the suspicious add-ins to verify which add-ins caused this issue.
If the issue persists in Safe Mode, please go to the Event Viewer, you may find out more information about why the Office apps crashed.
Press Win + R and type "eventvwr" in the blank box, then press Enter.
You may learn from http://www.msoutlook.info/question/317
If now you can't install Office properly, please refer to the KB below:
Office 2013 or Office 365 installation error "Something went wrong"
http://support.microsoft.com/kb/2827031/en-us
Try Fix it in the kb to try again.
Thanks,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

When I tried to click on link in email sent to confirm my email address, got error "something is wrong...unable to activate your account".

When I tried to confirm my e-mail address by clicking on the link in the e-mail after submitting a question on at this very help site, I got the following message:
Firefox Help
Welcome, sdsutherland1.
Dashboard | Sign Out
Something is wrong
We could not activate your account. Please make sure that you have clicked the correct link in your email or typed in the correct address.
I was able to log in to this site but what do I do now?
I have copied and pasted the e-mail body here:
Please confirm your Firefox Help question
Hi sdsutherland1,
Before your Firefox Help question (Firefox is not inserting my passwords after I go to Tools/Options/Security and check "Remember Passwords for Sites".)
can be seen by our support community, you need to confirm the
account you just created by clicking on the link below:
https://support.mozilla.com/en-US/users/activate/b2e421e53baaa2edc9f16143474f2cf1323f4a70
If you did not ask a question or changed your mind, simply delete
or ignore this email; you will not receive any more email from
us.
Thanks again for asking the question -- we're sorry you're having
trouble with Firefox, but our community of volunteers is looking
forward to helping you get it resolved as quickly as possible.
As you may know, Firefox Support (like all of Mozilla) is
community powered -- help is provided by users like you! Want to
take part? Browse other users' questions at
https://support.mozilla.com/questions?filter=unsolved -- you might
just make someone's day!

It is a phishing attempt. Do not respond. Do not divulge any personal or financial information. You can use the address below to forward the suspect email message to Apple.
[email protected]
The link below has information to help identify fraudulent emails.
http://support.apple.com/kb/HT4933

Sorry, something went wrong --- I got an error message after a new webapp was built and a new site collection was created

Sorry, something went wrong --- I got an error message after a new webapp was built and a new site collection was created.
This in SharePoint 2013 Farm.
What should I do?
1- I did a DisableLoopBack and set the value to "1".
For hostname do I have to do : 111.111.111.111 (sample) and serversp2013?
P.S. I fixed this issue once, long time ago and I forgot how it ... be done.

Hi,
For troubleshooting your issue, please take steps as below:
1.Go to IIS, make sure the web application is actived.
2.Go to IIS -> Applicaiton Pools, make sure the application pool related to your web application is started.
Reference:
http://support.microsoft.com/en-us/kb/926642/en-us
http://www.techrepublic.com/forums/questions/cannot-browse-created-web-application-site-in-sharepoint-services-30/
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Error while editing Workflow Task List Item - "Sorry, something went wrong.. Web must contain a discussion list

I have an custom approval workflow and when I try to edit an assigned approval Task it throws me an error
Sorry, something went wrong
Web must contain a discussion list
Any help appreciated!
Pravs

Hi,
For a better troubleshooting, I suggest you do as the followings:
1. Check the ULS log for more detailed error message, for SharePoint 2013, the ULS log is located at the path:
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS
You can use ULS Log Viewer to check the information in the log.
2. You can use fiddler to track if there is something wrong in the workflow request.
Here are some detailed articles about debugging workflow:
https://msdn.microsoft.com/en-us/library/office/dn508412.aspx
https://sharepointlogviewer.codeplex.com/
Thanks
Best Regards
Jerry Guo
TechNet Community Support

Sorry something went wrong. Please try again. Power BI Scheduled Data Refresh

My Power Pivot Connection can be refreshed locally from Excel workbook. However I receive the following error when attempting a data refresh from the Power BI site:
Sorry, something went wrong. Please try again. Correlation ID: 70aad105-6563-42de-9c27-272ecfa082ee start date 2/24/15 at 11:38 AM

Hi Ryan,
Will you please check the following:
1. are you refreshing the data from within Excel online?
2. If yes, does your workbook connect to on premises data source?
if yes, then refresh of on premises data sources from within Excel online is not supported. Schedule refresh is the only supported means to refresh workbooks connecting to on premises data sources or using Power Query.
If this does not answer your question. Please mention the steps you followed & attach an image of the error you see.
-mini

Something went wrong....

Sorry about this being extremely long.
Recently my iBook broke down so i sent it to get repaired turned out something was wrong with the hard drive so all my stuff went bye bye. I thought i had backupped everything but i realzed about 600 songs were not so i didnt want to lose them so i put my ipod into manual mode so i can keep them, but one day while adding a podcast something happened and iTunes crashed. After that wen i plugged back in my iPod it was no longer recognized by iTunes unless i erased everything and started over so after a week i decided to say goodbye to the songs and redo everything. I hooked up my hard drive and addded the songs to my ipod it was sort of a lot of songs, about 5300. So i let it update then watched a movie to let the time go, when i came back it still wasnt done so i started watching it to see how fast it was going, i quicly realized it was stuck at a certain song meaning at song about 4700 it just stopped syncing. I found the song in iTunes and played it to see if it worked, it did but i thought its just one song so i deleted it to move things along, nothing changed I guess iTunes didn't realized i delted it cuz it was still trying to add it, so i clicked the eject button so i could unplug it and plug it back to finish the syncing. When i did this itunes froze and after about 5 minutes i restarted my ipod by holding down menu and play, because itunes would not quit no matter how many times i hit the force quit button, but as soon as i unplugged the ipod it quit automaticly. So i grabbed my ipod and noticed NONE of the songs were there yet the space had still been taken up so I got very mad then plugged it back in and watched it update for half an hour then once again on a different song it froze. i got very mad, so mad i slammed my fist on my laptop and my ipod. I guess i was very mad because i cut myself and bled from the click wheel. Then I did it a third time, this time being very careful. Every 1000 songs i ejected it and checked if the songs were working then i plugged it back in, i did this 4 times then i stopped for the night because from the first time i plugged it in till that point had taken about 5 hours. So i played a few songs on it to make sure everything was fine, and it was fine indeed so i thought i wud update it later. A few days later i got some new music so i added them and every now and then i would add little by little. However now it doesnt work, it is doing what it used to do. When i try to add new music it maybe adds 4 or 5 then stops adding them and if i try to quit iTunes it freezes and wont quit until i unplug the ipod, when i unplug the ipod i get the warning thing, but all the songs work fine EXCEPT the songs i was trying to add. I thought maybe I should just wait so i updated it today and after waiting about 30 minutes for a song to update i was fed up. I do notice that the hard drive makes noises every once in a while, I know hard drive make noise because they spin and bla bla bla BUT what i hear is like a "da da da da da da" like it keeps tryin to write something but cant. I kind of think when i slammed my fist on it i might have messed something up internally that is why it always stops updating past a certain point. What do you think? The worst part is the warrenty juss expired a few weeks ago, so if I am right and the hard drive is the problem how much do you think it costs to fix it?

I have the same problem as yours with my 3rd Gen iPod, which hardly pass thru the 100 songs mark. Seems there are some recovered bad sectors on the Hard drive of the iPod. see doing the following helps
For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iTunes 7 and click “Restore”

"Oops, something went wrong." error message when t...

Since I was forced onto the new version of Skype due to the deprecation of historical versions I have been unable record a video message. Whilst I am able to participate in video calls with no hitches at all, attempting to record a video message instantly gives me the following error message:
"Oops, something went wrong.
Please try again, or get in touch if you need help."
Unfortunately, Microsoft struggle to implement error codes in their software, I can only assume this is because consumers find technical looking numbers terrifying, so I have absolutely no idea what the problem is - it could be a near infinite number of things.
I have done a full reinstallation of Skype, multiple times, including deleting all registries that are associated with Skype (as suggested in the Skype support site), clearing any obvious user caches that exist, and so on. Still, the problem persists. Not a single video source available on my computer allows the recording of a video message, so I do not believe this is a problem with my webcam or driver.
Running Windows 7 Home Premium 64-bit, Skype 6.18.0.106.
I would appreciate any suggestions to solve this frustrating problem. Thank you.
- BanTheCatEmoji

Please, run the DirectX diagnostics tool (32-bit version).
Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
Be aware that you will have to zip this file before attaching it here.

Something is wrong

Similar Messages

Maybe you are looking for