Something Strange with Lens Corrections

I used lens correction on an virtual copy of a DNG image. The image is of a building and I used a slight negative rotation to correct the perspective. After editing the image in LR3, I exported it to PS CS5 with the LR edits. So far so good. After some minor edits in PS I saved the edited PSD file and it shows up in LR. Still good. The problem occurs when I make a virtual copy of the PSD file in LR. Everything looks the same EXCEPT the lens correction seemingly reverts back to the original raw file.The crop that was part of the original lens correction is retained, but not the rotation. What is even stranger, this anomaly becomes apparent as soon as the virtual copy is created in the Library Module, but if I go to the Develop Module with the PSD virtual copy and select the BEFORE & AFTER view, the correct lens angle appears in the BEFORE and the skewed angle for the AFTER. I have tried everything I can think of and cannot figure out if it is me or the program. Any ideas?

As I try to replicate the problem, it the "unstraightening" seems to occur when I do the export, with LR adjustments. It appears that PS CS5 is retaining some of the settings from LR3, but not all. The crop remains (which is why I thought the image was initially OK back in LR), but the Lens Correction is reset. I just did a search and found that other people have been experiencing similar problems LR3 edits not being retained after working through the external editor. The thread I found (http://forums.adobe.com/message/2891636) did say that manually saving the XMP file is a work around, which I will try when I have time later. Thanks for all your input yesterday! I will report on what I find out.

Similar Messages

Support for DNG files with lens corrections?

Aperture 3.0.1 with the RAW Compatibility Update 3.1 now supports the lens corrections in my Olympus E-P1's native RAW format. yay!
unfortunately, since Aperture didn't support the camera for six months, I began a switch to Lightroom. consequently, I now have several thousand images that have been converted from the EP-1's native RAW format (ORF) to Adobe's so-called open RAW format (DNG). these DNGs don't load in Aperture (RAW format unsupported errors) because Aperture doesn't support DNGs with lens corrections.
Apple, can you please advise if lens corrections you support in native RAW files will also be supported in DNG conversions sometime soon? if so, I'll know it's safe to switch back to Aperture and recover the last six months of photos when the next RAW Compatibility Update happens.

Aperture 3.0.1 with the RAW Compatibility Update 3.1 does not support lens corrections. If you want lens corrections in Aperture you have to use Plugins like PTlens.
To my knowledge Aperture ignores all lens correction data in the original RAW files, just like it does with all the settings of the camera.

CR 8.2 doesn't come up with lens correction profile on Canon 6d with EF 24-105 L 4.0 IS/USM

Dear community members,
Some weeks ago I bought my new Canon EOS 6D with a EF 24-105 L f/4.0 IS/USM lens an I am absolutely happy with them :-)
The only problem that I run in to is when I process my photographs in Camera Raw. The thing is that CR does not come up with a lens correction profile for de Canon 6D with the lens mentioned above.
I do find a profile of the 1D Mark III, but this one does not work very well on the RAWs from the Canon 6D.
Does any one know if and (when yes) where I can find the right profile for lens correction? At the Adobe site I could not find the profile van this camera in combination with this objective.
Or perhaps there is another way to apply automatic lens corrections on RAW;s from the Canon 6D with a EF 24-105?
Kind regards and many thanks in advance for your answers :-)
-Gozotxu-

Hello,
Thanks for your advice.
I did download the DNG Coverter but it did not help. So I decided to uninstall Photoshop CS6 and reinstall it again on my Mac.
For uninstall I followed the following steps:
-go to finder
-go to the Photoshop CS6 map
-dubbel click on the Adobe-uninstall icon
This worked perfectly well without any errors.
Now I am running into another problem, a problem with reinstalling PS CS6.
I don't have a cd-rom with PS on it, but I have a downloaded a .DMG file which I bought and downloaded from Adobe (I don't have a CD-player in my Mac). This should not be any problem. But what happens is this:
When I dubbel-click the .DMG-file (Photoshop_13_LS16.dmg) the normal installation window appears.
After dubbel-clicking Photshop CS6 icon the following screen appears:
After selecting the Install icon the following screen appears:
The error message is in Dutch and says: 'install' excists on the diskcopy 'Photoshop_13_LS16.dmg'. Safari downloaded this diskcopy on 2 July 2013
The two buttons say: " Cancel" and "Delete diskcopy file"
When I select "Cancel" the application stops and when I select "Delete diskcopy file" it removes the Install-file (from screenshot) and the application stops.
Could you please tell me what I am doing wrong?
Thanks in advance!
Kind regards,
Gozotxu

Something strange with google search..

Something strange has happened with google...it's stuck on permanent zoom or something, like I have accessibility enabled, but I don't, and it only happens with google, everything else is normal. It's really zoomed in and blurry. The text is also chunky and kind of difficult to read..like it's too big for the search bar, and the little symbol on the search button is like off to the side, it's just clearly messed up. I've never had this problem before and can't figure out for the life of me what's causing it. It goes away if I switch to classic mode from tablet, but Id always used tablet prior to this and it was fine. I'd really like to fix tablet mode so I can use it or find a way to permentalety switch to classic because starting out on tablet and having to switch every time is a pain. Any ideas would be greatly appreciated, thanks.

I know of no way for the Google search to automatically go the to Classic site. Google directs the browser to mobile site because you are using a mobile device. You cannot control that in mobile browser like Safari. If you were using another web browser idenitifed as a desktop browser, you could set the page to Classic and it will stay there. I use iCab Mobile (I gave up Safari ages ago) and I indentify the browser as Fire Fox 4.0 for Mac and it always takes me to the Classic site.
One last time... this is where you are having this issue? Can you post a screen shot? Do you know how to do that? Hold down on the sleep button and then tap the home button and you will see the screen flash white and hear the camera shutter sound. That screen shot will be saved to the camera roll and it will be the last photo in the album.

Problems with LENS CORRECTION Photoshop CS5

Hello
I get up the dialogue box AUTO CORRECTION.
But I cant acitivate CORRECTION (geometrical distortion, chromatic aberration and vignette).
I cant press it, its is gray.
I have filled out everything as I have always done it.
I have never had this problem before, I have always managed to do lens correction.
What has happended?

You are in the Elements forum.
The Photoshop forum is there:
Photoshop General Discussion

Auto scale/crop with lens correction tool in Camera Raw 8.4

Does anyone know if this type of functionality exists in Camera Raw 8.4 similar to the Auto scale function in the lens correction filter? I understand the straighten tool offers this effect but I'm looking for in auto crop or autoscale feature when using the lens correction tool. Thanks in advance!

Good day!
I notice no difference to prior to 8.4.
But maybe the ACR Forum may be a better place for questions realted to ACR.
http://forums.adobe.com/community/cameraraw
Regards,
Pfaffenbichler

Problems with Lens Correction in CS5

Hello
I get up the dialogue box AUTO CORRECTION.
But I cant acitivate CORRECTION (geometrical distortion, chromatic aberration and vignette).
I cant press it, its is gray.
I have never had this problem before, I have always managed to do lens correction.
What has happended?

You are in the Elements forum.
The Photoshop forum is there:
Photoshop General Discussion

When making adjustments with lens correction, the crop isnt contrained to the image

When I first installed CC I was able to rotate, or adjust the image in lens correction and it would automatically crop to the available image dimensions.
But I deselected the contrain to image section in crop mode, and since then it hasnt work, even though contrain to image in crop tool has since been re-selected, many times.
Any idea whats wrong?

Thanks! All of my shots for this current interior shoot are panoramic. At a halt until I can resolve this.
Lightroom: 5.7
camera Raw 8.7
Photoshop CC 2014.2.2 Release / 20141204.r.310 x64
Other notes:
- converted arw sony raw (from a6000) into dng and still no results.

Help! Something strange with iPhoto

There's something wrong with iPhoto. The toolbar's order is wrong! I mean it's the reverse.
The buttons which are used when editting (efects,exposure,strokes etc.) are on the right. But they are suppose to be on the left. It was normal when I first purchased but it has changed. I didn't do anything. I've checked Apple's website. The order is definitely wrong. It's not just the toolbar. You can see the other pictures on the left while you're looking at a picture. Now they're on the right side. It's hard to use it like that

You can rearrange the controls and thumbnail grid by holding down onto the heading of the grid and dragging it. For example, I tapped and hold down onto the headline "6 Photos" in the upper menu bar and simply dragged the grid to the left side of the screen. Moving the thumbnail grid will also rearrange the controls.
Regards
Léonie

Something strange with k9a

hello everyone,
Sometimes when starting my pc (from restart or cold start) maybe three out of ten times the keyboard wont work, its a standard microsoft ps/2 keyboard, I haven't got any suspend modes enabled so I was just wondering if anyone else has had this problem or knows how to fix it,
oh yeah os xp32, its bios 1.2 that came with the board haven't had any reason to update as all seems to be working well just this strange behaviour from the keyboard.
Thanks in advance if anyone can help.

Hi!
Did you try another keyboard?
And, when the keyboard isn't functioning, do the leds go on or not?
Off-topic:
Quote from: patch1979 on 13-July-07, 02:59:08
its a standard microsoft ps/2 keyboard
And this is really a new concept: Microsoft making something standard ....

SOMETHING STRANGE WITH LAST YOUTUBE UPDATE

i had auto updates selected & got a notification of 2 updates. when i selected update i got a message that "properties of the app had changed & it would affect the sd card, wi-fi & a few others".
affecting the sd card by installing the update to the sd card & other items on card would be deleted.
youtube app showed aug 8th & i'm not sure if the notification was for something later.
anybody else see this?

Ok, I seem to be fixed now.
I had to do a new install (i opted for a clean install) and my imac wouldn't restart id just get a white screen. holding the power button to shutdown ant try to start up got it going but every time I restarted (not shut down then push the power button but restart as in update or just from the apple menu) it would stall at a white screen... I tried to reset the power management and permissions and the disk. also tried all extensions off. the strange thing was I could use the imac hard drive to boot up my macbook vis a firewire cable. I got the old firmware and set about putting the old firmware back on my imac.. now I have no sleep light and I didn't get the set o three tones and the firmware did not install... I couldn't get it to at all via the instructions here;
http://www.apple.com/support/downloads/firmwarerestorationcd16.html
I just get one long tone and thats it it then starts up with no backdate taking place????
Anyway, it doesn't seem to matter it has fixed itself I have restarted the imac 6 times in a row and no stalling at the white screen... I hope it doesn't come back but if it does how will I reset the firmware to an older version when the instructions don't work??

Something strange with sys

Dear all,
$sqlplus
Enter username :sys as sydba
Enter password : I type here whatever I like and not the exact password.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.6.0 - Production
SQL>
Next:
SQL>disc
SQL> connect xyz as sysdba
Enter password: I type here some characters from keyboard
Connected.
SQL>
Why is this strange behaviour?
Thanks in advance
SL
There is no user xyz
Message was edited by:
user480060

Like said above, this is nothing strange.
The key here is "as sysdba", that you request a database admin connection. If your os user is in the OSDBA group (e.g. dba) you will be let in. Read about admin authentication in the following documentation piece:
http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/dba.htm#i1006628

Something strange with Weblogic domains

Hi,
I've come across strange things when I created nearly a dozen (hell yeah :)) of different domains trying to resolve issue with managed servers and node manager.
So, to the point : does weblogic cache somewhere (or all servers store in one place) its configuration? does BAM do the same?
I created on one weblogic jms queue Queues/testQueue, and then in totally different weblogic in another domain i saw (while server starting) "
<Jun 21, 2010 5:11:26 PM EEST> <Warning> <oracle.bam.common.messaging.api.jms.JMSMessageConsumerRegistry> <BEA-000000>
<Open thread for destination=*Queues/testQueue*.handleThrowable error=oracle.bam.common.messaging.api.exception.OpenFailedException
: BAM-00533: Resource open for destination Queues/testQueue failed. destination=Queues/testQueue
oracle.bam.common.messaging.api.exception.OpenFailedException: BAM-00533: Resource open for destination Queues/testQueue fai
led."
again, in the same domain i start BAM server and in Architect see Data objects from another domain. How could that be>?
Thanks in advance

BAM is a component of SOA Suite so it's probably best to ask this question there.
SOA Suite
WLS will keep a list of domains created with the config wizard in the node manager file like this:
<MIDDLEWARE_HOME>\wlserver_10.3\common\nodemanager\nodemanager.domains
But I'm unaware of any other WLS configuration / files that would reference JMS information.
Perhaps it could be coming for the database schema underneath BAM?

Something strange with interlacement.

Well,
I've reported strange issue since i've try to solve my slow rendering
(more here https://discussions.apple.com/thread/4806925?start=30&tstart=0)
On my iMac, when i export my project (FCPX 10.0.7) with Render Master file, the final files seems to be normal.
Opening the same project on my Mac Book Pro, also with FCPX 10.0.7 and choose Render Master File, there my video show me interlacement line in all movement scenes.
What would be the problem ?
The original footage was in HDV 1080i50 (25 Mb/s), PCM linéaire.
The background rendering was in Original/Optimal - best performance
Final File was in 1440x1080 Apple ProRes 422, Linear PCM, Timecode HD 1-1-1
The only difference between both rendering, i let once before do background rendering and the second one do it without that.

Well thanks for those informations !
I have compressor, but not use it in those investigation. My first problem was the extremly long rendering time (maybe 72 hours for small video under 10 minutes). Since i choose Master file, i have a realy quicker export. and i could after that use Compressor for a 720p output.
Anyway i was suprised to have that interlacement image on my master file rendering.
and then i was anxious about how it will be viewed in a BluRay project.
I worked with 3 different camera. an Sony HD-1000 on HDV and Sony Z5 (HDV with CF-module) was the first one, and those one only do 1080 50i
The last one was a Sony VG20, it should be able to do 25p or 50p, but as i should mix sources, for now i recorded in 50i. That one was also special as it produce 50i video with a progressive captor as i've read.
Note : Certains caméscopes filment en 50i sans pour autant subir l'effet de peigne sur les mouvements rapides, pourquoi ? C'est le cas du Sony NEX-VG10 qui filme en 1080/50i, mais qui possède un capteur photo APS progressif. L'image est donc captée nativement en mode progressif puis entrelacée à la compression AVCHD.
Well i see that now exporting my files in 1440x1080 50p works well, "but" the HD image seems to be smooth.

Something strange with ICMP...

Hello,
I have a strange thing happening with one of my switches. It is a 4507, populated with four 48 10/100/1000 port blades. All of a sudden today approximately 25% of devices attached to these ports have stopped responding to PINGs.
The ports are scattered among all 4 blades. There are no other noticeable problems either... the PCs attached to the ports are working fine and their IP addresses even show up in the switch's arp table.
I have tried shutting then unshutting the ports and have cleared the arp cache on the switch.
Not sure what to try next... Anyone seen this before?
Thanks for any tips.
Charles

Problem solved....
Windows XP firewall.
Charles

Something Strange with Lens Corrections

Similar Messages

Maybe you are looking for