Song list will not display?

After restoring the system on my Ipad and reloading purchased applications, the song list only appeared for a short time. I can only see the "album" cover when music is playing. None of the other soft buttons on the bottom of the screen respond; e.g. Songs, Audio Books, Albums. The screen does not respond to tapping in any area and is almost completely black except for two vertical bands on the right and left side and the song that is playing at the top. Hope you can help. Thank you.

Hi Pamela,
Sometimes people can't get that source window open, even when they try to move the dot/dimple to the right.
First try to drag the button to show the column as show here
If that doesn't work, then you need to delete the Preference file. That info (size of the source window) is kept in the iPhoto Preference file.
Quit iPhoto
Open your User folder, then open the Library in your user folder, then open the Preferences in the Library folder.
In the Preference folder is a file called com.apple.iPhoto.plist
For now, drag that file to the desktop. Launch iPhoto and see if the source window is there or if you can open the source window. If you can, that means that Preference file you dragged to the desktop was corrupt. Put it in the trash.
IPhoto made a new one when it was launched. Open iPhoto Preferences and set your preferences again and you are good to go.

Similar Messages

E1200 Wireless Client List will not display and causes web UI to temporarily stop responding

I picked up an E1200 and set it up successfully. I am using wireless MAC filtering, and decided to pull up the list of connected wireless clients (Wireless >> Wireless MAC Filter >> push "Wireless Client List" button).
When I do so, it immediately throws this back:
Immediately after this the Web UI of the E1200 becomes inaccessible. It still routes traffic, and the router remains pingable, but it will not allow access to the Web UI for several minutes. The error that appears upon attempt to access the Web UI during this time window is similar to the above, but reads "Error 102 (net::ERR_CONNECTION_REFUSED): The server refused the connection."
I have tried this in Google Chrome, Firefox 4, and MSIE on two separate computers. Each browser displays the error a bit differently (MSIE, for example, just says it can't display the page and gives no further detail) but the net results are always the same. I have tried resetting the device to factory defaults in addition to re-downloading the firmware from the Cisco/Linksys website and installing it. No improvement.
I have also noted that the Log (Administration >> Log; and yes, I have it enabled) doesn't appear to be picking up anything at all. In fact, the Security log, which supposedly (according to the Help) "displays the login information for the Router’s browser-based utility," is also blank.
Is this a bug, or should I head back to the retailer and swap this device?

Ok - I nailed this down, I think, and it looks like a firmware bug.
Short version is that a factory reset cleared the issue, but during stepwise reconfiguration the problem came back. Through a bunch of iteration I figured out that if I have the E1200's DHCP server disabled *and* have wireless clients connected to it, the problem I described appears.
Turn the DHCP server back on and the problem goes away. Turn it off and the problem comes back. Turn it back on and it goes away. You get the idea.
If I had to pose a theory here, it's that the initial display of the Wireless Client List, which uses "IP Address" as the default sort, somehow implodes if the E1200 isn't actually assigning those IP addresses to the clients.
When this happens it appears to crash the Web UI wholesale. Just for grins, while the Web UI was unresponsive, I pinged the router it as before - still pingable - then ran nmap against it - no open ports found on the router. When the Web UI is functional, though, nmap detects port 80 quite easily. I have not timed how long it takes for the Web UI to come back up, but it is longer than 5 minutes, and I presume some sort of watchdog process has to detect that it has gone kaput and start it up again.
Final test was to restore my saved configuration from before the factory reset (note that the saved config was done under the same firmware version, and in this config, the DHCP server is disabled). Boom, problem. Wait for the Web UI to come back, turn on the DHCP server. Problem goes away. Turn the DHCP server off. Boom, problem comes back.
So, there you go.
Would be interesting if someone could verify this via a test against another E1200. It may be worth noting that in my baseline test I was also using Manual wireless setup (vs. Wi-Fi Protected Setup), and WPA2. Didn't make any other setting changes from the factory defaults. I did not actually have to turn the Wireless MAC Filter on to do the test. All one needs to do is click Enable on the Wireless MAC Filter tab, and then do *not* click Save Settings - just clicking Enable will light up the Wireless Client List button, which you can then push to get the list. That is how I handled testing to ensure that neither specific entries, nor the Prevent/Permit setting, nor having the filter enabled in saved configuration were involved in the problem.
Separately, no explanation for the lack of entries in the security log, but that pretty much looks like a firmware bug to me as well.

Email list will not display individual addresses and names , only name of list.

First time user of lists. I created a new email list per help instructions-- created just fine. When I try to use it to write, no matter which methods I use, only the list name is displayed. It does send the email to all the addresses, but I want to be able to see all the individual addresses so bcc or removal etc. can be used prior to sending. Any suggestions?

Does the list description include spaces? If so, try to use a name without spaces or replace spaces with "_", there has been a bug about this reported as [https://bugzilla.mozilla.org/show_bug.cgi?id=1060901 Bug #1060901]. If you have an account on Bugzilla, please consider voting for that issue.
Several other people have sent in the similar support requests to yous, noting this happened after they upgraded to version 31.1.
The exact error message is: XXXX is not a valid e-mail address because it is not of the form user@host. You must correct it before sending the e-mail.
Is that what you see?
'''This happens in Thunderbird 31.1.0 when your mailing list description includes several words separated by spaces.'''
Although not ideal, these workarounds should let you use your mailing lists until a proper fix is implemented:
* While composing an email open the address book and select the list you are trying to send to, highlight all the names in the list and drag them to the To: box. This uses your existing data without modifying it.
* Replacing the blanks " " between the words in such lists' descriptions with an underscore "_". This requires modifying your mailing list(s) description(s).
* Downgrade to a previous version and disable automatic updates (Windows)

I have a new Mazda CX 7 my song list will not come up on screen in car my wife blackberry the song list comes up is there an app that I need for my iPhone 4 to do the same

I have a new Mazda CX 7 my wife blackberry sync up nice with blue tooth. We can use voice dial phone list shows on car dash screen also her whole playlist and song titles Ect... All show up on dash screen my iPhone 4 I can use it hands free but no info comes up on the car screen at all. The mazda sales person who claims to be an Apple guru said apple does not support this it has something to do with the os he said he hopes that apple will support this in future os. Is there an app that can do this now ? Anyone thank you for your help

Demo,
I was using the New iPad (iPad 3??) to access my FL Comcast email account for the 1st time. on a new internet site, my Canadian Cousin's site in her home in Quebec. I had never used this iPad on my Comcast account.
Whenever I try to access my email account from a different internet account than my own, Comcast always asks me for my user name and password. They also normally ask me to answer a security question that I have given them beforhand to prove who I am.
Thia time they did not do that. They have started a more secure check system that requires you to read numbers and letters from a box that is moving around and retype those items into another box before hitting enter. Machines cannot read those letters. The iPads, not having "Flash" installed, also can not see those letters/numbers.
If you can not see the letters/numbers you can not type them into the second block therefore you can not verify that you are who you claim to be.
After all that, the also show a screen that asks if this is your personal computer or one from a friend or library or company etc, and if you want them to remember this device as yours from now on....
I just left the Apple Store here and they said that the reason I can not see the "Floating Figures" is because the iPads cannot show anything that is made using "Flash" stuff because that system is not the latest updated secure system....
Thank for the reply.
sgmjack

Music list will not display whole page

I have just bought a new Tower with Vista and I have downloaded iTunes 8.0 to work on it. All seems well except that when I am trying to scroll down my list of music in the main library I can only scroll the bottom 6 or 8 songs. The majority if the page is static. If I click on one of the few that do scroll then the complete page will change to what it should be. I thought maybe I had downloaded a corrupt version of iTunes so I uninstalled and reinstalled it to the same effect. I am downloading the version offered which is the 64 bit version but I am not sure if my Vista is 64 bit even though I read that all modern sales are and as mine is less than a fortnight old I assume it is? I am tempted to sort out a 32 bit version or even download a version 7 but I thought that someone here might point me in the right direction?

Hello, can you explain, what exactly doesn't print & what exactly doesn't download?

Iphotos Source list will not display...

I would greatly appreciate any help that anyone could offer... I have a new ibook G4 with iphoto 5 [5.0.4 (263) to be exact] I am embarrassingly baffled by this system, as I cannot get my Source list to display whatsoever, and am therefore unable to organize my photos into albums. My photo library is the only thing that displays. Whenever I attempt to create a new file the file disappears, I assume, into the source list which seems unfindable... I am a complete newbie at this, so I am anticipating an enormously obvious answer to this dilemma, but it is an answer that is absolutely evading me, left to my own devices! Any help would be extremely appreciated!!

Hi Pamela,
Sometimes people can't get that source window open, even when they try to move the dot/dimple to the right.
First try to drag the button to show the column as show here
If that doesn't work, then you need to delete the Preference file. That info (size of the source window) is kept in the iPhoto Preference file.
Quit iPhoto
Open your User folder, then open the Library in your user folder, then open the Preferences in the Library folder.
In the Preference folder is a file called com.apple.iPhoto.plist
For now, drag that file to the desktop. Launch iPhoto and see if the source window is there or if you can open the source window. If you can, that means that Preference file you dragged to the desktop was corrupt. Put it in the trash.
IPhoto made a new one when it was launched. Open iPhoto Preferences and set your preferences again and you are good to go.

My Ipad will not display song lyrics

I upgraded to ios 5 and it will not display song lyrics for songs that I put lyrics in for.
any ideas?

I tried Lyrics View but it didn't work well for me. It listed music by song title, there was no way to change that to list by artist or album, and it was difficult to select a song to listen to; often a different one would play than the one highlighted.
Pauser Pro works better but it's still frustrating. I do enjoy being able to see lyrics again, but music is listed alphabetically by song title rather than by artist or album, and there is no preference panel which lets you change that by default. If you want to hear all the songs on a specific album and you select the artist, you get an alphabetized list of his or her songs with a blue cross to the left of each. Clicking All Songs places them on a list, which you can then click on to play a specific song. But you have to put the songs in that list first, and I was unable to make separate lists for each artist; attempts to do so led to them all being placed at the end of the first list.
I was finally able to make up a Playlist using a specific genre on iTunes on my computer, transfer it to my iPad, and then access it through Pauser Pro, but the artists were again mostly mixed up and it took a very long time to rearrange them by artist so I could select one and hear all the songs by one person or group. Of course, after that it continues to the next artist on the list, but at least I don't have to keep fiddling with it while I'm busy doing something else and just trying to enjoy some music.
I contacted the developer about these issues and essentially was told that the app was primarily developed for professionals performing on a stage and that it worked well for that purpose. I'm still not clear on how to create discrete lists in one wished to do that, though.

Adobe Premiere Elements 13, will not display video picture, audio only. My video format is listed as compatible with Adobe.

Adobe Premiere Elements 13, will not display video picture, audio only. My videois listed as compatible with Adobe.

douglass
On what computer operating system is your Premiere Elements 13 running? Have you updated 13 to 13.1 yet using an opened project's Help Menu/Updates?
If not, please do so.
You have not given us enough information with which to help you.
What are the properties of your source file that is presenting in the project with audio but no video?
Quickest way to gain that information is from brand/model/settings of the camera that recorded the video.
I am looking for
video compression
audio compression
frame size
frame rate
interlaced or progressive
file extension
pixel aspect ratio
What does the file's thumbnail look like in Project Assets after it is imported....thumbnail with no image (gray), thumbnail with only an audio icon
within it, or other? On the Timeline, what do you see represented in Video 1....nothing as opposed to Audio 1 where you see the audio portion of
the file?
Do you have the latest version of QuickTime installed on your computer along with Premiere Elements 13/13.1? Are you running the programs as
administrator?
Is your video card/graphics card driver version up to date according to the web site of the manufacturer of the card?
Let us start here. Based on your reply details, we will customize troubleshooting strategy for you.
Thanks.
ATR

Ipod will not display track and artist name when i play a song

ipod will not display track and artist name when i play a song... i cant see the the volume display to adjust it eiether. Everyting shows up in the menus just not on the now playing screen.... any suggestions?

Try restoring your iPod. Just be aware that restoring will erase the hard drive, reload the software and put it back to default settings. Once the restore is complete follow the on screen instructions and it should connect to iTunes and give you a prompt to automatically update your library onto the fresh installation. If you want to update manually or using selected playlists choose no and it will default to manual mode and you can choose whatever setting you like: Restoring iPod to factory settings with iTunes 7

My ITunes will not display songs correctly

Ok my Itunes on one of my computers will not display the three boxes at the top labled Genre, Artist, Album. I do know that there is a view icon at the top with three boxes and you click the one to the left. I have two computers and it works just fine on one but not the other. Please Help. Thanks.
John

Hit ctl+B to show the browser.
Or, itunes menu > View > Show Browser.

Newly created images will not display in Firefox 8 for Mac. Same images appear in other browsers. Why?

1. Specific new images are uploaded but will not display in Firefox 8 on my Mac with OS 10.6.8. (Does appear in other browsers, e.g., Chrome and Opera, and appears on Firefox 8 for PC.) Also, other images on the page display.
2. I have cleared cache, cookies, etc., in Recent History, and restarted both application and computer.
3. I've tried creating GIF, JPG and PNG, but none show on the page in Firefox on my Mac. I can see the offending image in other browsers such as Chrome on the same computer, and on Firefox on PC. Offending pages are in both PHP and HTML: http://www.brookfieldcivic.org/advertisers.php and http://www.brookfieldcivic.org/advertising_freedom_montessori.html
Image links: http://www.brookfieldcivic.org/images/advertisers/freedom.png and http://www.brookfieldcivic.org/images/advertisers/Freedom_Montessori_bizcard.jpg

You can use these steps to check if images are blocked:
*Open the web page that has the images missing in a browser tab.
*Click the website favicon ([[Site Identity Button]]) on the left end of the location bar.
*Click the "More Information" button to open the "Page Info" window with the Security tab selected (also accessible via "Tools > Page Info").
*Go to the Media tab of the "Tools > Page Info" window.
*Select the first image link and scroll down through the list with the Down arrow key.
*If an image in the list is grayed and there is a check-mark in the box "Block Images from..." then remove that mark to unblock the images from that domain.

Firefox will not display on the screen even though with Process Explorer I see Firefox.exe active but no CPU usage

I use Firefox v10.0.2 as default browser on Dell XPS8300 e/w Intel Core i5 & Windows 7 Ultimate and Compaq Presario CQ57 e/w Intel Core i3 & Windows 7 Home. More frequently on the (about 90% of attempts) than the Dell (50% of attempts) Firefox will not display to the screen when I click on icon. When it happens I cannot display other programs. I specifically say display because I believe Firefox has started. To circumvent the problem I installed Process Explorer on both machines and start this program first then click on Firefox icon. When problem occurs I can see Firefox.exe process in Process list; some CPU consumed but, then, no CPU activity. If I click on Firefox icon again another process opens in Process list but with same response - some CPU consumed and then no CPU activity. If I have 2 processes running and kill the 1st process, the 2nd will display and everything from then on is normal. If I do not open a 2nd process but kill the 1st process then click on Firefox icon Firefox is displayed and everything from then on is normal. This problem has occurred since original installation on both new machines. I've updated video drivers in both machines.

Ok, let's see if we can fix this and get it working for you!
First, if you start Firefox in [[safe mode|safe mode]] (restart your computer first, then when you open Firefox, hold down the shift key) does it start up more reliably? This is usually caused by a faulty add-on. If it does help, then restart Firefox, go into the Firefox button, then add-ons, and disable your extensions one by one until you find the trouble maker.
Also, try updating to Firefox 11, it has several bug fixes that might make life easier here.
Just as a few basic troubleshooting steps to make sure we have all the bases covered,
Run all Windows Updates, install all needed service packs, etc.
Update all your plugins (Flash, Java, etc.): [http://www.mozilla.org/plugincheck/ http://www.mozilla.org/plugincheck/].
Download and Install MalwareBytes Anti-Malware, run a full Scan. [http://www.malwarebytes.org/ http://www.malwarebytes.org/]. This helps check that there are no viruses on your computer causing issues. you can uninstall this program after you clean off any infections.

Photos show up as thumbnail but when I click on them they will not display

Photos show up as thumnails but when I click on them they will not display. I get a exclamation mark in a dotted line box

Hylan:
That occurs when the library has lost the link to the original file. This is a result of a damaged library database file, Library6.iPhoto. You can try rebuilding the library from within iPhoto to see if you can recover the photos by launching iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select the first three options. However, it's iffy.
You can rebuild the library with iPhoto Library Manager as it create a new library, leaving the original one intact, by reading the AlbumData.xml file and copying what it needs. You will be able to recover the photos, albums, keywords, titles and comments. However, books, slideshows, and calendars will not be recovered. Here's how:
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 -Download iPhoto Library Manager and launch.
2 -Click on the Add Library button, navigate to your User/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File->Rebuild Library menu option
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: It may take some time to create the new library if you have a lot of photos. Report back on how long it took and how many photos you have in the library so we can give other users an idea of how long it may take.
It that doesn't work you'll have to start over with a new library and import the Originals folder from the old library as follows:
Creating a new library while preserving the Events from the original library.
Move the existing library folder to the desktop.
Open the library package like this.
Launch iPhoto and, when asked, select the option to create a new library.
Drag the Originals folder from the iPhoto Library on the desktop into the open iPhoto window.
This will create a new library with the same Events as the original library if you have the Finder checkbox unchecked in the Events preference pane.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

In FireFox 4.0, PDF files will not display

After updating to 4.0, PDF files will not display in the browser window as before. All I get is blank screen. Everything works fine in IE9. I have updated all the plug-ins, including Adobe Acrobat. Also have enable Display PDF in browser in Acrobat Reader.

If images are missing then check that you aren't blocking images from some domains.
You can use these steps to check if images are blocked:
* Open the web page that has the images missing in a browser tab.
* Click the website favicon ([[Site Identity Button]]) on the left end of the location bar.
* Click the "More Information" button to open the "Page Info" window with the Security tab selected (also accessible via "Tools > Page Info").
* Go to the Media tab of the "Tools > Page Info" window.
* Select the first image link and scroll down through the list with the Down arrow key.
* If an image in the list is grayed and there is a check-mark in the box "Block Images from..." then remove that mark to unblock the images from that domain.
See also:
* http://kb.mozillazine.org/Images_or_animations_do_not_load

After Lion upgrade Applications folder will not display alphabetically by Name.

The list will change display when selecting label, date, etc.; however, when choosing Name, the display is still not alphabetical.

Thanks for the quick advice!
Unfortunately, I am still unable to open my core productivity apps, namely Skype and Evernote. Twitter, as well, could not start. But interesting quick fix though, I never knew you could do that.
Here's the error log after the restart:
What else should I try?

Song list will not display?

Similar Messages

Maybe you are looking for