Sony Xperia M Camera NOT RESPONDING PROBLEM

My Camera is not responding well. As soon as I select Picture Effect, the screen turns black and the phone becomes unresponsive 
This is the second time I am facing the same problem in a second replaced handset.

Repair it with PCC, if that doesn't work then contact your local Xperia Care 
PC Companion (PCC)
Bridge (for Mac)
Alternatives on How to backup Xperias
http://talk.sonymobile.com/thread/36355
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Similar Messages

  • Please help me with this 'did not respond' problem.

    So, I too have this same old 'user did not respond' problem. I know there are lot of similar problems but this was the last thing left to do – post here. So, audio and video are not working.
    My setup:
    ADSL-line -> A-Link RoadRunner 44E –modem --(wired)--> Airport Express –(wireless)--> My PowerBook
    More information about the modem can be found here: http://www.a-link.com/uk/RR44.html?id=H4phxx3p
    A-Link:
    IP = 10.0.0.2
    Subnet = 255.255.255.0
    NAT = Enabled (only way to get AirTunes to work)
    Firewall = Disabled
    Port forward = Disabled (tried it but no difference)
    DHCP = Enabled 10.0.0.3-10.0.0.99 Subnet 255.255.255.0
    UPnP = Don’t have it
    Airport Express:
    IP = 10.0.0.3
    Subnet = 255.255.255.0
    NAT = Disabled
    DHCP = Disabled
    PowerBook (10.4.4):
    IP = 10.0.0.22 (using dhcp)
    Subnet = 255.255.255.0
    Firewall = Off (On or off no difference. Yes, I added all the necessary ports)
    QuickTime Streaming Speed is set to match my Download
    iChat > Preferences > Video Section > Bandwidth Limit is set to NONE
    Tried 10.4.4 combo installer but no luck.
    Everything else works (Internet, Skype, AirTunes…) and I can text chat in iChat. I don’t know what else to try anymore . By-the-way this has worked with these same settings one time before, then it went dead. Don’t understand…
    I tried to connect and this is what /Applications/iChat.app/Contents/MacOS/iChat -errorLogLevel 7 had to say (looong and some is in finnish):
    PowerBook-Ville:~ ville$ /Applications/iChat.app/Contents/MacOS/iChat -errorLogLevel 7
    185350.100130 Loading hardware rules from hardwarerulesH264-G4.plist
    185350.101435 Checking H264 hardware rules
    185350.101926 Satisfied rule #4 (30:160x120)
    185350.102967 setLocalUserName: Ville @10.0.0.22
    185350.143698 ### NEW STATE: to: VC_INIT, from: VC_INVALID
    185350.145859 ### NEW STATE: to: VC_IDLE, from: VC_INIT
    185350.146389 ++++++++ confStatusMapRemoveAll
    185350.146662 ( ) -- mapUserIDToSecurityInfo cleared --
    185350.147441 UPnP init passed
    185350.150244 NATTraversal created
    185350.151282 Bandwidth based on QT prefs = 384
    185350.167948 BWD: GotBandwidth: 445845/468686 (up/down) @[10.0.0.22:255.255.255.0]
    185350.168679 BWD bandwidth: 445 kbits up, 468 kbits down.
    185350.168965 videoNetworkCapable: 1 -- 3 max participants.
    185350.169148 audioNetworkCapable: 1 -- 9 max participants.
    185350.169400 vcCapabilities returns: 0x0000001f
    185350.169914 VCCapAudio
    185350.170480 VCCapVideo
    185350.172530 VCCapMultiAudio
    185350.173351 VCCapMultiVideo
    185350.173632 VCCapMultiAudioHost
    185609.538404 Microphone: callback thread: STANDARD; EXTENDED timeshare: 0; PRECEDENCE importance: 17
    185609.538585 Microphone: null device thread: STANDARD; EXTENDED timeshare: 0; PRECEDENCE importance: 17
    185609.583711 Microphone devices:
    185609.583779 Camera_HasAudio = 0
    185609.586286 iSight Sisäänrakennettu
    185609.586693 Sisäinen mikrofoni
    185609.586740 Linja sisään
    185609.604815 Selected mic: Sisäänrakennet / imic
    185609.683890 SIPManager init
    185609.700807 selectedCamera returned iSight
    185609.972619 Microphone devices:
    185609.973469 Camera_HasAudio = 0
    185609.973961 iSight Sisäänrakennettu
    185609.975015 Sisäinen mikrofoni
    185609.975690 Linja sisään
    185609.978111 Microphone devices:
    185609.978692 Camera_HasAudio = 0
    185609.979612 iSight Sisäänrakennettu
    185609.980640 Sisäinen mikrofoni
    185609.981305 Linja sisään
    185609.984519 Microphone devices:
    185609.985590 Camera_HasAudio = 0
    185609.986262 iSight Sisäänrakennettu
    185609.989338 Sisäinen mikrofoni
    185609.990224 Linja sisään
    185609.993780 Microphone devices:
    185609.999644 Camera_HasAudio = 0
    185610.000253 iSight Sisäänrakennettu
    185610.001371 Sisäinen mikrofoni
    185610.002618 Linja sisään
    185610.004677 BWD: GotBandwidth: 445845/468686 (up/down) @[10.0.0.22:255.255.255.0]
    185610.005235 BWD bandwidth: 445 kbits up, 468 kbits down.
    185610.005539 videoNetworkCapable: 1 -- 3 max participants.
    185610.005750 audioNetworkCapable: 1 -- 9 max participants.
    185610.006038 vcCapabilities returns: 0x0000001f
    185610.006306 VCCapAudio
    185610.006494 VCCapVideo
    185610.006670 VCCapMultiAudio
    185610.006830 VCCapMultiVideo
    185610.006999 VCCapMultiAudioHost
    185610.017356 Camera_HasAudio = 0
    185610.018534 Diffusion prefilter disabled
    185610.019653 Temporal prefilter disabled
    185610.020353 startPreview returned 0
    185610.246234 VCDelegate conforms to VideoConferenceDelegate protocol.
    185610.246504 setLocalUserName: [email protected]
    185610.246738 ( ) setValidatedIdentity: [00000000]
    185610.484041 Updating local frame notification.
    185610.505527 Found 1 cameras:
    185610.506223 iSight - 2857630788957422
    185610.506822 selectedCamera returned iSight
    185610.509889 Microphone devices:
    185610.510561 Camera_HasAudio = 0
    185610.511032 iSight Sisäänrakennettu
    185610.512038 Sisäinen mikrofoni
    185610.512794 Linja sisään
    185610.513875 Selected mic: Sisäänrakennet / imic
    185610.515986 Found 1 cameras:
    185610.538016 iSight - 2857630788957422
    185610.541768 selectedCamera returned iSight
    185610.544617 Microphone devices:
    185610.545694 Camera_HasAudio = 0
    185610.546398 iSight Sisäänrakennettu
    185610.547749 Sisäinen mikrofoni
    185610.549249 Linja sisään
    185610.550480 Selected mic: Sisäänrakennet / imic
    185610.566895 Found 1 cameras:
    185610.567504 iSight - 2857630788957422
    185610.567942 selectedCamera returned iSight
    185610.598208 Microphone devices:
    185610.598987 Camera_HasAudio = 0
    185610.599405 iSight Sisäänrakennettu
    185610.600395 Sisäinen mikrofoni
    185610.605420 Linja sisään
    185610.606595 Selected mic: Sisäänrakennet / imic
    185610.887059 SNATMAP Configuration Data: snatmap://snatmap.mac.com:5678
    185610.887146 acquireSNATMAPConfigurationProc: Refresh UPnP status via SIP
    185610.887587 SIPUpdateExternalInfo, force = 0
    185610.887993 Transport(UDP) Thread start...
    185610.922366 Sending SNATMAP heartbeat to 11FAF895:5678
    185611.034312 Microphone devices:
    185611.034395 Camera_HasAudio = 0
    185611.034563 iSight Sisäänrakennettu
    185611.034772 Sisäinen mikrofoni
    185611.034808 Linja sisään
    185611.036584 Microphone devices:
    185611.036629 Camera_HasAudio = 0
    185611.036712 iSight Sisäänrakennettu
    185611.036907 Sisäinen mikrofoni
    185611.036942 Linja sisään
    185611.038972 Microphone devices:
    185611.039013 Camera_HasAudio = 0
    185611.039118 iSight Sisäänrakennettu
    185611.039377 Sisäinen mikrofoni
    185611.039418 Linja sisään
    185611.040876 Microphone devices:
    185611.040908 Camera_HasAudio = 0
    185611.040979 iSight Sisäänrakennettu
    185611.041128 Sisäinen mikrofoni
    185611.041158 Linja sisään
    185611.043801 Microphone devices:
    185611.043860 Camera_HasAudio = 0
    185611.043968 iSight Sisäänrakennettu
    185611.044153 Sisäinen mikrofoni
    185611.044187 Linja sisään
    185611.045709 Microphone devices:
    185611.045744 Camera_HasAudio = 0
    185611.045814 iSight Sisäänrakennettu
    185611.046424 Sisäinen mikrofoni
    185611.046468 Linja sisään
    185611.048000 Microphone devices:
    185611.048038 Camera_HasAudio = 0
    185611.048116 iSight Sisäänrakennettu
    185611.048312 Sisäinen mikrofoni
    185611.048345 Linja sisään
    185611.053033 Microphone devices:
    185611.053109 Camera_HasAudio = 0
    185611.053228 iSight Sisäänrakennettu
    185611.053932 Sisäinen mikrofoni
    185611.053984 Linja sisään
    185611.055690 Microphone devices:
    185611.055733 Camera_HasAudio = 0
    185611.055818 iSight Sisäänrakennettu
    185611.055982 Sisäinen mikrofoni
    185611.056014 Linja sisään
    185611.057544 Microphone devices:
    185611.057577 Camera_HasAudio = 0
    185611.057648 iSight Sisäänrakennettu
    185611.057800 Sisäinen mikrofoni
    185611.057831 Linja sisään
    185611.059749 Microphone devices:
    185611.059791 Camera_HasAudio = 0
    185611.059872 iSight Sisäänrakennettu
    185611.060046 Sisäinen mikrofoni
    185611.060077 Linja sisään
    185611.061622 Microphone devices:
    185611.061659 Camera_HasAudio = 0
    185611.061732 iSight Sisäänrakennettu
    185611.061883 Sisäinen mikrofoni
    185611.061913 Linja sisään
    185611.063394 Microphone devices:
    185611.063428 Camera_HasAudio = 0
    185611.063497 iSight Sisäänrakennettu
    185611.063643 Sisäinen mikrofoni
    185611.063672 Linja sisään
    185611.066617 Microphone devices:
    185611.066673 Camera_HasAudio = 0
    185611.066776 iSight Sisäänrakennettu
    185611.067227 Sisäinen mikrofoni
    185611.067271 Linja sisään
    185611.068950 Microphone devices:
    185611.068987 Camera_HasAudio = 0
    185611.069074 iSight Sisäänrakennettu
    185611.069268 Sisäinen mikrofoni
    185611.069303 Linja sisään
    185611.070700 Microphone devices:
    185611.070729 Camera_HasAudio = 0
    185611.070797 iSight Sisäänrakennettu
    185611.070943 Sisäinen mikrofoni
    185611.070972 Linja sisään
    185611.073651 Microphone devices:
    185611.073709 Camera_HasAudio = 0
    185611.073900 iSight Sisäänrakennettu
    185611.074105 Sisäinen mikrofoni
    185611.074137 Linja sisään
    185611.077101 Microphone devices:
    185611.077164 Camera_HasAudio = 0
    185611.077282 iSight Sisäänrakennettu
    185611.077535 Sisäinen mikrofoni
    185611.077574 Linja sisään
    185611.079754 Microphone devices:
    185611.079804 Camera_HasAudio = 0
    185611.079903 iSight Sisäänrakennettu
    185611.080082 Sisäinen mikrofoni
    185611.080115 Linja sisään
    185611.081523 Microphone devices:
    185611.081552 Camera_HasAudio = 0
    185611.081618 iSight Sisäänrakennettu
    185611.081762 Sisäinen mikrofoni
    185611.081792 Linja sisään
    185611.121455 Microphone devices:
    185611.122034 Camera_HasAudio = 0
    185611.122425 iSight Sisäänrakennettu
    185611.124169 Sisäinen mikrofoni
    185611.125123 Linja sisään
    185611.127666 Microphone devices:
    185611.128187 Camera_HasAudio = 0
    185611.128587 iSight Sisäänrakennettu
    185611.129647 Sisäinen mikrofoni
    185611.130244 Linja sisään
    185611.132819 Microphone devices:
    185611.134250 Camera_HasAudio = 0
    185611.135216 iSight Sisäänrakennettu
    185611.136205 Sisäinen mikrofoni
    185611.136834 Linja sisään
    185611.139475 Microphone devices:
    185611.139950 Camera_HasAudio = 0
    185611.140296 iSight Sisäänrakennettu
    185611.141079 Sisäinen mikrofoni
    185611.141615 Linja sisään
    185611.166215 SNATMAP heartbeat resulted in IP change (from: 0 to: C1E5E663)
    185611.166278 SNATMAP heartbeat resulted in port change (from: 0 to: 5060)
    185612.167249 UPnP not found (-3)
    185612.171190 SIPUpdateExternalInfo, force = 0
    185612.171685 count of local IP's = 2
    185612.171957 LOCAL: ifname=[external], IP=[193.229.230.99], PORT = 5060
    185612.172156 LOCAL: ifname=[en1(IPv6)], IP=[fe80:0005:0000:0000:0214:51ff:fe7d:9c80], PORT = 5060
    185612.172352 LOCAL: ifname=[en1], IP=[10.0.0.22], PORT = 5060
    185612.173468 LOCAL: ifname=[en1~], IP=[245.255.255.233], PORT = 5060
    185622.137382 BWD: GotBandwidth: 445845/468686 (up/down) @[10.0.0.22:255.255.255.0]
    185622.138294 BWD bandwidth: 445 kbits up, 468 kbits down.
    185622.138712 videoNetworkCapable: 1 -- 3 max participants.
    185622.139590 audioNetworkCapable: 1 -- 9 max participants.
    185622.140080 vcCapabilities returns: 0x0000001f
    185622.140369 VCCapAudio
    185622.140561 VCCapVideo
    185622.140722 VCCapMultiAudio
    185622.140873 VCCapMultiVideo
    185622.142572 VCCapMultiAudioHost
    185622.156043 BWD: GotBandwidth: 445845/468686 (up/down) @[10.0.0.22:255.255.255.0]
    185622.156628 BWD bandwidth: 445 kbits up, 468 kbits down.
    185622.156950 videoNetworkCapable: 1 -- 3 max participants.
    185622.157183 audioNetworkCapable: 1 -- 9 max participants.
    185622.157453 vcCapabilities returns: 0x0000001f
    185622.157698 VCCapAudio
    185622.157875 VCCapVideo
    185622.158024 VCCapMultiAudio
    185622.158272 VCCapMultiVideo
    185622.158449 VCCapMultiAudioHost
    185622.165188 Invoke delegate method vcc:initiateConferenceStartedForParty:(tapiopihlava2)
    185622.165935 ### NEW STATE: to: VC_SIGNALING, from: VC_IDLE
    185622.166598 initiateConferenceCallUsingRemoteIPAndPortData - start
    185622.167128 [ipAndPortData length] = 160
    185622.167895 Length is valid: YES
    185622.168283 CALLEE: ifname=[external], IP=[80.223.48.120], wPort = 5060
    185622.168547 CALLEE: ifname=[en0(IPv6)], IP=[fe80:0004:0000:0000:020d:93ff:fec2:a986], wPort = 5060
    185622.168809 CALLEE: ifname=[en0], IP=[192.168.0.103], wPort = 5060
    185622.169066 ( )( )( ) ---- <nil> valid returned 0
    2006-02-06 18:56:22.170 iChat[890] IPAndPortList: ({ip = "80.223.48.120"; port = 5060; }, {ip = "192.168.0.103"; port = 5060; })
    185622.170164 =========== OpenPorts!
    185622.362532 BWD: GotBandwidth: 445845/468686 (up/down) @[10.0.0.22:255.255.255.0]
    185622.364353 BWD bandwidth: 445 kbits up, 468 kbits down.
    185622.364681 videoNetworkCapable: 1 -- 3 max participants.
    185622.364885 audioNetworkCapable: 1 -- 9 max participants.
    185622.365149 vcCapabilities returns: 0x0000001f
    185622.365391 VCCapAudio
    185622.365562 VCCapVideo
    185622.365711 VCCapMultiAudio
    185622.365858 VCCapMultiVideo
    185622.366002 VCCapMultiAudioHost
    185622.656162 Public mapping: 193.229.230.99:16384
    185622.879503 Public mapping: 193.229.230.99:16385
    185623.444910 Public mapping: 193.229.230.99:16386
    185623.860324 Public mapping: 193.229.230.99:16387
    185623.874400
    VideoConferenceFramework version 245.0 - 02102005 - Dec 15 2005
    185623.875487 Checking H263 hardware rules
    185623.876060 Satisfied rule #4 (30:1)
    185623.877092 selectedCamera returned iSight
    185623.884938 * Caller SDP *
    185623.886009 v=0
    o=ville 0 0 IN IP4 %RTP-IP%
    [email protected]
    c=IN IP4 %RTP-IP%
    b=AS:2147483647
    t=0 0
    a=hwi:70:1:1666
    a=bandwidthDetection:YES
    a=iChatEncryption:NO
    m=audio %ARTP-PORT% RTP/AVP 12 3 0
    a=rtpmap:3 GSM/8000
    a=rtpmap:0 PCMU/8000
    a=rtpID:1939560629
    m=video %VRTP-PORT% RTP/AVP 126 34
    a=rtpmap:126 X-H264
    a=fmtp:34 imagesize 1 rules 30:352:288
    a=framerate:30
    a=RTCP:AUDIO %ARTCP-PORT% VIDEO %VRTCP-PORT%
    a=pogo
    a=fmtp:126 imagesize 0 rules 30:160:120:160:120
    a=rtpID:-604506380
    185623.886877 SIPConnect start...
    185623.889046 TAInviteClientProc Thread start...
    185623.889850 ( )( )( )( )( ) TP IS BINARY? (0)
    185623.890303 ( )( )( )( )( ) TP TEXT BODY (910) (484)
    185623.890537 Send to 50DF3078:5060 [INVITE sip:[email protected] SIP/2.0
    Via: SIP/2.0/UDP 193.229.230.99;branch=z9hG4bK1386bfa62bd64505
    Max-Forwards: 70
    To: "tapiopihlava2" <sip:[email protected]>
    From: "[email protected]" <sip:[email protected]>;tag=1532351692
    Call-ID: 8145be4e-9731-11da-b767-f3451e6113c4@10-0-0-22
    CSeq: 1 INVITE
    Contact: <sip:[email protected]>;isfocus
    User-Agent: Viceroy 1.2
    Content-Type: application/sdp
    Content-Length: 484
    v=0
    o=ville 0 0 IN IP4 193.229.230.99
    [email protected]
    c=IN IP4 193.229.230.99
    b=AS:2147483647
    t=0 0
    a=hwi:70:1:1666
    a=bandwidthDetection:YES
    a=iChatEncryption:NO
    m=audio 16386 RTP/AVP 12 3 0
    a=rtpmap:3 GSM/8000
    a=rtpmap:0 PCMU/8000
    a=rtpID:1939560629
    m=video 16384 RTP/AVP 126 34
    a=rtpmap:126 X-H264
    a=fmtp:34 imagesize 1 rules 30:352:288
    a=framerate:30
    a=RTCP:AUDIO 16387 VIDEO 16385
    a=pogo
    a=fmtp:126 imagesize 0 rules 30:160:120:160:120
    a=rtpID:-604506380
    185624.392078 ( )( )( )( )( ) TP IS BINARY? (0)
    185624.393194 ( )( )( )( )( ) TP TEXT BODY (910) (484)
    185624.394457 Send to 50DF3078:5060 [INVITE sip:[email protected] SIP/2.0
    Via: SIP/2.0/UDP 193.229.230.99;branch=z9hG4bK1386bfa62bd64505
    Max-Forwards: 70
    To: "tapiopihlava2" <sip:[email protected]>
    From: "[email protected]" <sip:[email protected]>;tag=1532351692
    Call-ID: 8145be4e-9731-11da-b767-f3451e6113c4@10-0-0-22
    CSeq: 1 INVITE
    Contact: <sip:[email protected]>;isfocus
    User-Agent: Viceroy 1.2
    Content-Type: application/sdp
    Content-Length: 484
    v=0
    o=ville 0 0 IN IP4 193.229.230.99
    [email protected]
    c=IN IP4 193.229.230.99
    b=AS:2147483647
    t=0 0
    a=hwi:70:1:1666
    a=bandwidthDetection:YES
    a=iChatEncryption:NO
    m=audio 16386 RTP/AVP 12 3 0
    a=rtpmap:3 GSM/8000
    a=rtpmap:0 PCMU/8000
    a=rtpID:1939560629
    m=video 16384 RTP/AVP 126 34
    a=rtpmap:126 X-H264
    a=fmtp:34 imagesize 1 rules 30:352:288
    a=framerate:30
    a=RTCP:AUDIO 16387 VIDEO 16385
    a=pogo
    a=fmtp:126 imagesize 0 rules 30:160:120:160:120
    a=rtpID:-604506380
    185625.397658 ( )( )( )( )( ) TP IS BINARY? (0)
    185625.398766 ( )( )( )( )( ) TP TEXT BODY (910) (484)
    185625.399296 Send to 50DF3078:5060 [INVITE sip:[email protected] SIP/2.0
    Via: SIP/2.0/UDP 193.229.230.99;branch=z9hG4bK1386bfa62bd64505
    Max-Forwards: 70
    To: "tapiopihlava2" <sip:[email protected]>
    From: "[email protected]" <sip:[email protected]>;tag=1532351692
    Call-ID: 8145be4e-9731-11da-b767-f3451e6113c4@10-0-0-22
    CSeq: 1 INVITE
    Contact: <sip:[email protected]>;isfocus
    User-Agent: Viceroy 1.2
    Content-Type: application/sdp
    Content-Length: 484
    v=0
    o=ville 0 0 IN IP4 193.229.230.99
    [email protected]
    c=IN IP4 193.229.230.99
    b=AS:2147483647
    t=0 0
    a=hwi:70:1:1666
    a=bandwidthDetection:YES
    a=iChatEncryption:NO
    m=audio 16386 RTP/AVP 12 3 0
    a=rtpmap:3 GSM/8000
    a=rtpmap:0 PCMU/8000
    a=rtpID:1939560629
    m=video 16384 RTP/AVP 126 34
    a=rtpmap:126 X-H264
    a=fmtp:34 imagesize 1 rules 30:352:288
    a=framerate:30
    a=RTCP:AUDIO 16387 VIDEO 16385
    a=pogo
    a=fmtp:126 imagesize 0 rules 30:160:120:160:120
    a=rtpID:-604506380
    185625.892455 Dialog(CREATED) Match(STATUS) [8145be4e-9731-11da-b767-f3451e6113c4@10-0-0-22]=[8145be4e-9731-11da-b767-f3451 e6113c4@10-0-0-22], [1532351692]=[1532351692]
    185625.893480 TAInviteClientProc Thread end(800B0017)...
    185625.894096 SIPConnect stop(900A0015)...
    185625.894489 SIPConnect start...
    185625.895221 TAInviteClientProc Thread start...
    185625.895918 ( )( )( )( )( ) TP IS BINARY? (0)
    185625.896499 ( )( )( )( )( ) TP TEXT BODY (890) (474)
    185625.896748 Send to C0A80067:5060 [INVITE sip:[email protected] SIP/2.0
    Via: SIP/2.0/UDP 10.0.0.22;branch=z9hG4bK21044bc52afe21a2
    Max-Forwards: 70
    To: "tapiopihlava2" <sip:[email protected]>
    From: "[email protected]" <sip:[email protected]>;tag=1854864533
    Call-ID: 82780e7a-9731-11da-b767-a80aaba613c4@10-0-0-22
    CSeq: 1 INVITE
    Contact: <sip:[email protected]>;isfocus
    User-Agent: Viceroy 1.2
    Content-Type: application/sdp
    Content-Length: 474
    v=0
    o=ville 0 0 IN IP4 10.0.0.22
    [email protected]
    c=IN IP4 10.0.0.22
    b=AS:2147483647
    t=0 0
    a=hwi:70:1:1666
    a=bandwidthDetection:YES
    a=iChatEncryption:NO
    m=audio 16386 RTP/AVP 12 3 0
    a=rtpmap:3 GSM/8000
    a=rtpmap:0 PCMU/8000
    a=rtpID:1939560629
    m=video 16384 RTP/AVP 126 34
    a=rtpmap:126 X-H264
    a=fmtp:34 imagesize 1 rules 30:352:288
    a=framerate:30
    a=RTCP:AUDIO 16387 VIDEO 16385
    a=pogo
    a=fmtp:126 imagesize 0 rules 30:160:120:160:120
    a=rtpID:-604506380
    185626.398285 ( )( )( )( )( ) TP IS BINARY? (0)
    185626.399598 ( )( )( )( )( ) TP TEXT BODY (890) (474)
    185626.400034 Send to C0A80067:5060 [INVITE sip:[email protected] SIP/2.0
    Via: SIP/2.0/UDP 10.0.0.22;branch=z9hG4bK21044bc52afe21a2
    Max-Forwards: 70
    To: "tapiopihlava2" <sip:[email protected]>
    From: "[email protected]" <sip:[email protected]>;tag=1854864533
    Call-ID: 82780e7a-9731-11da-b767-a80aaba613c4@10-0-0-22
    CSeq: 1 INVITE
    Contact: <sip:[email protected]>;isfocus
    User-Agent: Viceroy 1.2
    Content-Type: application/sdp
    Content-Length: 474
    v=0
    o=ville 0 0 IN IP4 10.0.0.22
    [email protected]
    c=IN IP4 10.0.0.22
    b=AS:2147483647
    t=0 0
    a=hwi:70:1:1666
    a=bandwidthDetection:YES
    a=iChatEncryption:NO
    m=audio 16386 RTP/AVP 12 3 0
    a=rtpmap:3 GSM/8000
    a=rtpmap:0 PCMU/8000
    a=rtpID:1939560629
    m=video 16384 RTP/AVP 126 34
    a=rtpmap:126 X-H264
    a=fmtp:34 imagesize 1 rules 30:352:288
    a=framerate:30
    a=RTCP:AUDIO 16387 VIDEO 16385
    a=pogo
    a=fmtp:126 imagesize 0 rules 30:160:120:160:120
    a=rtpID:-604506380
    185627.403907 ( )( )( )( )( ) TP IS BINARY? (0)
    185627.407726 ( )( )( )( )( ) TP TEXT BODY (890) (474)
    185627.408136 Send to C0A80067:5060 [INVITE sip:[email protected] SIP/2.0
    Via: SIP/2.0/UDP 10.0.0.22;branch=z9hG4bK21044bc52afe21a2
    Max-Forwards: 70
    To: "tapiopihlava2" <sip:[email protected]>
    From: "[email protected]" <sip:[email protected]>;tag=1854864533
    Call-ID: 82780e7a-9731-11da-b767-a80aaba613c4@10-0-0-22
    CSeq: 1 INVITE
    Contact: <sip:[email protected]>;isfocus
    User-Agent: Viceroy 1.2
    Content-Type: application/sdp
    Content-Length: 474
    v=0
    o=ville 0 0 IN IP4 10.0.0.22
    [email protected]
    c=IN IP4 10.0.0.22
    b=AS:2147483647
    t=0 0
    a=hwi:70:1:1666
    a=bandwidthDetection:YES
    a=iChatEncryption:NO
    m=audio 16386 RTP/AVP 12 3 0
    a=rtpmap:3 GSM/8000
    a=rtpmap:0 PCMU/8000
    a=rtpID:1939560629
    m=video 16384 RTP/AVP 126 34
    a=rtpmap:126 X-H264
    a=fmtp:34 imagesize 1 rules 30:352:288
    a=framerate:30
    a=RTCP:AUDIO 16387 VIDEO 16385
    a=pogo
    a=fmtp:126 imagesize 0 rules 30:160:120:160:120
    a=rtpID:-604506380
    185627.897341 Dialog(CREATED) Match(STATUS) [82780e7a-9731-11da-b767-a80aaba613c4@10-0-0-22]=[82780e7a-9731-11da-b767-a80aa ba613c4@10-0-0-22], [1854864533]=[1854864533]
    185627.898634 TAInviteClientProc Thread end(800B0017)...
    185627.900651 SIPConnect stop(900A0015)...
    185627.901212 SIP connect returned 21
    185627.902477 SIPCloseCall start...
    185627.902912 (SIP.c:3322) Cannot find call ID(2)
    185627.903671 SIPCloseCall stop(800C0016)...
    185627.904006 ### NEW STATE: to: VC_IDLE, from: VC_SIGNALING
    185627.904247 ++++++++ confStatusMapRemoveAll
    185627.904434 ( ) -- mapUserIDToSecurityInfo cleared --
    185627.904619 Preparing to send VCInitiateConferenceCompleted
    185627.904842 Invoke delegate method vcc:initiateConferenceCompletedForParty:(tapiopihlava2) - retcode: -8
    185627.910736 SIPUpdateExternalInfo, force = 0
    185627.911922 count of local IP's = 2
    185627.912335 LOCAL: ifname=[external], IP=[193.229.230.99], PORT = 5060
    185627.912559 LOCAL: ifname=[en1(IPv6)], IP=[fe80:0005:0000:0000:0214:51ff:fe7d:9c80], PORT = 5060
    185627.912806 LOCAL: ifname=[en1], IP=[10.0.0.22], PORT = 5060
    185627.912978 LOCAL: ifname=[en1~], IP=[245.255.255.233], PORT = 5060
    185627.913185 sendPing: 80.223.48.120:5060
    185627.913404 Sending SNATMAP heartbeat to 50DF3078:5060
    185627.913731 Sending SNATMAP heartbeat to 50DF3078:5060
    185627.914107 Sending SNATMAP heartbeat to 50DF3078:5060
    185627.914425 sendPing: 192.168.0.103:5060
    185627.914689 Sending SNATMAP heartbeat to C0A80067:5060
    185627.915221 Sending SNATMAP heartbeat to C0A80067:5060
    185627.915564 Sending SNATMAP heartbeat to C0A80067:5060
    185634.876688 BWD: GotBandwidth: 445845/468686 (up/down) @[10.0.0.22:255.255.255.0]
    185634.878098 BWD bandwidth: 445 kbits up, 468 kbits down.
    185634.878441 videoNetworkCapable: 1 -- 3 max participants.
    185634.879209 audioNetworkCapable: 1 -- 9 max participants.
    185634.879652 vcCapabilities returns: 0x0000001f
    185634.879945 VCCapAudio
    185634.880129 VCCapVideo
    185634.880285 VCCapMultiAudio
    185634.880433 VCCapMultiVideo
    185634.880574 VCCapMultiAudioHost
    185638.106335 Connection closed from the child process
    185638.115266 cancelPreview returned 0
    185638.116545 MULTIPOINT VC_API OVERRIDE: endConference
    185638.117034 userIDToCallIDMap count = 0
    185638.117308 ++++++++ confStatusMapRemoveAll
    185638.117511 ( ) -- mapUserIDToSecurityInfo cleared --
    185638.222629 Found 1 cameras:
    185638.223364 iSight - 2857630788957422
    185638.223767 selectedCamera GUID returned iSight
    185638.226179 Microphone devices:
    185638.226723 iSight Sisäänrakennettu
    185638.227581 Sisäinen mikrofoni
    185638.228156 Linja sisään
    185638.228705 Selected mic: Sisäänrakennet / imic
    185638.229534 Found 1 cameras:
    185638.229992 iSight – 2857630788957422
    … The rest isn’t probably that important.
    So what the dell is going on !? Could somebody pleeaaase help me? Pleaseeeee.
    3.1.1   Mac OS X (10.4.4)  

    Hi
    I made a couple of changes hope they work.
    A-Link:
    IP = 10.0.0.2
    Subnet = 255.255.255.0
    NAT = Enabled (only way to get AirTunes to work)
    Firewall = Disabled>>>>>>>>>>>>>>>>>>>>>>>>>>Enable firewall
    Port forward = Disabled (tried it but no difference)>>>>>>>Enable go here for info http://www.portforward.com/english/routers/port_forwarding/A-Link/roadrunner44b/ iChat.htm
    DHCP = Enabled 10.0.0.3-10.0.0.99 Subnet 255.255.255.0
    UPnP = Don’t have it
    Airport Express:
    IP = 10.0.0.3
    Subnet = 255.255.255.0
    NAT = Disabled>>>>>>Enable
    DHCP = Disabled
    PowerBook (10.4.4):
    IP = 10.0.0.22 (using dhcp)
    Subnet = 255.255.255.0
    Firewall = Off (On or off no difference. Yes, I added all the necessary ports)>>>>>>>>>>>>>>Turn on and untick any ports you put in for iChat
    QuickTime Streaming Speed is set to match my Download
    iChat > Preferences > Video Section > Bandwidth Limit is set to NONE
    Tried 10.4.4 combo installer but no luck.
    Tony

  • The "hanging/freezing/not responding" problem that existed in all versions of Firefox 3.6 persists in Firefox 4.0

    Starting on April 14, 2011, I tried installing Firefox 4.0, which I downloaded from the Mozilla site. The first couple of times I tried to install it, it corrupted Firefox file places.sqlite. I know this because the install renamed the file to places.sqlite.corrupt. Luckily, I had recent backups. My previous installed versions were 3.5.18, which I had been using up to this time, and 3.6.16. I tried installing 4.0 with 3.6.16 installed, which I installed only for the sake of installing 4.0, and with no previous version installed and got the same bad results. I finally got a "successful" install on April 16, 2011, with no previous version installed.
    Early on I discovered that Firefox 4.0 hangs (Firefox not responding) when left to idle for exactly 5 minutes (I timed it several times after immediately starting Firefox), pegging a constant 50% of the CPU when it hangs. I left it in a hanging state for up to half an hour, but nothing changed. This problem existed for all versions of Firefox 3.6, which is why I didn't install version 3.6.16 until I was ready to install version 4.0. I never kept any version of Firefox 3.6 installed for more than a couple of hours because of this problem. I need to be able to let Firefox stay idle for long periods of time -- certainly for more than 4 minutes and 59 seconds -- without having it hang, and I was able to do that with all versions of Firefox prior to version 3.6. It's incomprehensible that Firefox 4.0 has to always hang if it's inactive for more than 4 minutes and 59 seconds, and it's incomprehensible that this problem has been present and persistent since version 3.6 was introduced. To believe that 4 minutes and 59 seconds is sufficient idle time for a browser is absurd. This was never an issue with any version of Firefox prior to version 3.6, this was never an issue with Netscape, and it's not an issue with IE 8.
    There are 2 other problems related to the hanging problem. If the browser and the bookmarks library are both open and the browser is closed normally, the bookmarks library remains open. After being left idle for exactly 5 minutes, the bookmarks library hangs, pegging a constant 50% of the CPU. If Firefox 4.0 is restarted before the 5 minute idle limit, it starts successfully. If an attempt is made to restart it after the 5 minute idle limit, it won't start. If the bookmarks library is left open for less than 5 minutes after the browser is closed, it can be closed successfully. In all versions of Firefox prior to version 3.6, the bookmarks library automatically closed when the browser was closed. The other related problem is that Firefox 4.0 occasionally pegs a constant 50% of the CPU without hanging even while it is being used and even if the only thing open is the home page, which in my case is google.com. Firefox can be used while this is happening, but it is worrisome and shouldn't be happening. Normally, Firefox 4.0 uses no CPU when it is left to idle within the 5 minute idle limit.
    Firefox 4.0 has not crashed on its own yet, so I've had no crash reports to send to Mozilla, but because I've had to use the "End Now" button on the Microsoft unresponsive program window numerous times to terminate it when it hangs, numerous Microsoft Windows dump reports have been generated, all of which I've sent to Microsoft.
    The last fully working version of Firefox I had was 3.5.18. Unfortunately, I don't have the installer for that version and Mozilla doesn't make it available anymore. Also, it looks like version 4.0 altered the places.sqlite file such that I might not be able to go back to version 3.5.18 even if I could. If I could reinstall version 3.5.18 and get it to work with the altered places.sqlite file, I would, but it is outdated and no longer supported by Mozilla, and I only want to use up-to-date and supported software.
    The hanging problem is totally intolerable and unacceptable. If I can't get a version of Firefox 4.0 anytime soon that doesn't hang after being idle for just 5 minutes (why 5 minutes???) or for any limited amount of time, I'll have to install and use Google Chrome as a permanent replacement for Firefox. (If I do have to replace Firefox with Google Chrome, how can I get my Mozilla Thunderbird e-mail links to open in Google Chrome when I click on them?) Based on other user feedback regarding this problem dating back to the very first Firefox 3.6 version, Mozilla has had ample time to resolve it. I have found other problems with Firefox 4.0, but I'm not going to bother telling Mozilla about them because if the hanging problem isn't resolved soon, I'll have to stop using Firefox permanently. I can't and won't tolerate the hanging problem. I have been using Firefox exclusively for many years, but my disappointment with it has been growing since version 3.6 was introduced and my patience has run out.
    I would appreciate Mozilla letting me know within a week of this posting if they can't or won't fix the Firefox 4.0 hanging problem. If I don't receive a substantive response to this problem within a week, I'm going to have to abandon Firefox permanently and switch to Google Chrome. I'm also going to leave a negative review of Firefox 4.0 on CNET to warn other potential users of the hanging problem.
    I am running Windows XP Media Center Edition 32-bit SP3 on a Dell XPS 400 desktop computer. I have an Intel Pentium D CPU 2.80GHz, 3.0GB Dual-Channel DDR2 RAM @ 265MHz, RADEON X300 SE 128MB HyperMemory, and 190GB of free space on my hard drive. I am using COMODO as my firewall and Avira AntiVir as my anti-virus software. I am also using WinPatrol and Secunia PSI. My ISP is AT&T. My download speed averages 2.5 Mbps, and my upload speed averages 0.65 Mbps. All of my software is up to date, thanks to Secunia PSI and CNET TechTracker, and my computer is free from infection.

    Another aspect of the Firefox 4.0 "hanging/freezing/not responding" problem has emerged. I have found that on the common occurrence when Firefox 4.0 occasionally pegs a constant 50% of the CPU while idling within the 5 minute idle limit and I close it normally, it disappears from the Task Bar but continues to run and continues to peg a constant 50% of the CPU. I tried restarting Firefox 4.0 and got the following message: "Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system." Before Firefox can be restarted, the existing Firefox process must be killed via the Task Manager or Process Explorer (I use the latter), after which a Microsoft Windows dump report is immediately generated. I always allow the dump to be sent to Microsoft.
    The three big questions that have gone unanswered by Mozilla are 1) why did the hanging problem start with the very first release of Firefox 3.6, 2) why was the problem allowed to continue on up to and through Firefox 4.0, and 3) why hasn't Mozilla fixed the problem yet? And what is the significance of the 5 minute idle limit? Do Firefox 3.6 through 4.0 try to launch something when the browser and/or the bookmarks library have been idle for exactly 5 minutes? Maybe it's a problem with the number and/or type of plugins and extensions and/or the number of bookmarks. Maybe Firefox 3.6 through 4.0 work just fine if there are few to no plugins, extensions, and bookmarks, but that doesn't realistically accommodate users. Whatever the cause of the problem, Mozilla should have had a handle on it by now.
    If anyone from Mozilla Support is reading this post, please let me know if it is possible to roll back Firefox 4.0 to Firefox 3.5.18. If it is possible, how do I do it, and where can I get the installer for Firefox 3.5.18? If I can reinstall it, I'll use it until Secunia Software Inspector informs me that it is insecure and no longer safe to use. At that point (maybe much sooner), I'll switch to Google Chrome exclusively because I don't want to use outdated software that is insecure and because I don't believe that Mozilla intends to fix the hanging problem and is willing to lose users over it. I certainly don't want to use software like Firefox 4.0 that has such an impactful problem. If I do have to abandon Firefox, how can I click on Mozilla Thunderbird e-mail links and get them to open in Google Chrome?

  • Do not have not responding problem with chrome

    I like Firefox much better than chrome - but when I have the not responding problem, after about 15 minutes
    I switch to Chrome and do not have this problem - Hopefully someone can help with this.
    Thanks

    Many site issues can be caused by corrupt cookies or cache.
    * Clear the Cache and
    * Remove Cookies<br> '''''Warning ! ! '' This will log you out of sites you're logged in to.'''
    Type '''about:preferences'''<Enter> in the address bar.
    * '''Cookies;''' Select '''Privacy.''' Under '''History,''' select Firefox will '''Use Custom Settings.''' Press the button on the right side called '''Show Cookies.''' Use the search bar to look for the site. Note; There may be more than one entry. Remove '''All''' of them.
    * '''Cache;''' Select '''Advanced > Network.''' Across from '''Cached Web Content,''' Press '''Clear Now.'''
    https://support.mozilla.org/en-US/kb/firefox-cant-load-websites-other-browsers-can
    '''https://support.mozilla.org/en-US/kb/firefox-slow-how-make-it-faster'''
    '''https://support.mozilla.org/en-US/kb/firefox-uses-too-many-cpu-resources-how-fix'''
    '''https://support.mozilla.org/en-US/kb/firefox-hangs-or-not-responding'''

  • Yet Another "User Did not respond" problem

    After reading through the many discussions about this problem, I didn't find anyone that is in my exact same boat, so I need to ask.
    I, like others, am having the "USER did not respond" problem. However I used to connect to my girlfriend on her iBook with no problems from my iMac. Recently my parents got a new iMac and I couldn't connect to them and now I can 't connect to my girlfriend either! Keep getting the "USER did not respond" error every time! The only thing that has changed since the last time I successfully video chatted with my girlfriend was a the OS X update....
    Oh yeah, here's where its gets weirder: I can connect to the Apple Test accounts with no problem.
    This is really ******* me off! Please help.

    Have you tried connecting to a known user that has no issues? That will help determine where the problems lies.
    You can find willing testers listed here: http://www.ralphjohnsuk.dsl.pipex.com/ContactTesters.html
    Also, posting more about your set-up will also help (Mac model, Cable/DSL modem type, router, etc)
    Lastly, a fresh restart may help, power down all of your components, including your cable/dsl modem/router and start them up in this order: Cable/Dsl Modem (Wait a min or two) router, then your macs.

  • Camera not responding

    I'm having FREQUENT issues with my camera not responding or freezing up when I try to use it.
    I have also noticed my phone turning itself off or spontaneously restarting.
    Anyone know a "fix" for either issue?
    This is a replacement phone because my brand new Droid Maxx had the same camera issue about 2 months after I bought it.
    I've restarted, reset, cleared cache, and uninstalled updates, yet nothing seems to help. With my first Maxx, I tried all the same things at the advise of online support, when they didn't work, I was issued a replacement.
    I guess my dilemma is, Is there now a "fix? should I get a replacement? or should I Edge Up and try a different phone?

        We want to see you snapping away with your camera, lucychik! Did this start as soon as you received the replacement? Have you installed the same applications on this device as the last? Does this happen in apps that use camera or just native Camera program? When restart occurs are you using a certain app or process? I am eager to get to the bottom of this!
    Thank you,
    YaleK_VZW
    Follow us on Twitter @VZWsupport

  • How to enable 'Grid square ' in Sony Xperia Z2 camera?

    Hi, I want to enable 'Grid square' in my Sony Xperia Z2 camera. Is this option available? If yes, how can I don't that?
    Please help.
    Thanks in advance
    -Parthiban

    You need to contact sony:
    http://www.sonymobile.com/global-en/support/contact-us/
    All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

  • More 'not responding' problems

    I've just started having the 'not responding' problems I've read about elsewhere in this forum.
    I get the beach-ball when I enter the address with auto-fill. If I go to the address book and select the address there - no problem. Also no problem with airport disabled (I connect to the internet via a radio hub). OK if I start Mail while holding down the shift key. All seems OK for a while if I restart my computer but problem returns after a while.
    I've tried switching off remote images. I have verified and repaired permissions and disk. I have disabled .mac setting. I have deleted unused port configurations. I read somewhere that one cure was to delete some preference file or other but when I looked, the file didn't exist on my system. Nothing seems to work.
    Whilst trying to sort this out I have also had 'not responding' problems with System Prefs, so I guess this might not be specific to Mail.
    Please can someone help? I thought I had left these kind of problems behind when I migrated from Windows!
    iMac G5   Mac OS X (10.4.9)  

    Stanley - The dig at Windows was supposed to be half-humorous. I didn't really expect to have no probs with my Mac but perhaps I did think they might be easier to fix.
    The consul log starts like this
    Mac OS X Version 10.4.9 (Build 8P135)
    2007-05-08 21:25:18 +0100
    Activating the message port
    Activiating timer port
    <CFURL 0x3017b0 [0xa07bc150]>{type = 15, string = Contents/PlugIns/,
    base = <CFURL 0x301a60 [0xa07bc150]>{type = 15, string = file://localhost/System/Library/Extensions/IomegaSAM.kext/Contents/Resources/Iom egaDriver.app/, base = (null)}}
    <CFArray 0x303b40 [0xa07bc150]>{type = mutable-small, count = 2, values = (
    0 : <CFUUID 0x302360> 6489D402-14F7-11D6-96CE-00306557676C
    1 : <CFUUID 0x3033e0> 21ED6942-3C86-11D6-BC93-00306557676C
    before CFRunLoopRun
    2007-05-08 21:26:15.768 SystemUIServer[258] lang is:en
    2007-05-08 21:26:19.171 SystemUIServer[258] Normally SSMenuExtra would not have been loaded as a Menu Extra.
    2007-05-08 21:26:19.207 SystemUIServer[258] Normally MCMenuExtra would not have been loaded as a Menu Extra.
    Disk Utility started.
    Verify permissions for “Macintosh HD”
    Determining correct file permissions.
    parent directory ./Users/Shared/SC Info does not exist
    Permissions verification complete
    The privileges have been verified or repaired on the selected volume
    Authentication Service: Started
    2007-05-08 22:14:30.119 SyndicationAgent[426] WARNING: BestCalendarDateFromString - can't interpret: 'Tue 08 May 2007 14:06:36 -800'
    2007-05-08 22:14:30.235 SyndicationAgent[426] WARNING: BestCalendarDateFromString - can't interpret: 'Tue 08 May 2007 14:06:36 -800'
    2007-05-08 22:14:30.275 SyndicationAgent[426] WARNING: BestCalendarDateFromString - can't interpret: 'Tue 08 May 2007 14:06:36 -800'

  • My Sony Xperia ZL does not recognize the last update of the software

    My Sony Xperia ZL does not recognize the last update of the software or from the same mobile or from the computer app, I formatted the phone but it still does not recognize it when I give updates check it tells me that the phone have the latest software.
    Thanks

    You can find the latest available software update information on our product blog. When an update is available for your phone you will get a notification.
    If want to know more about software roll out process and how it works please see this topic.

  • Two Nearly Identical Workstations--1 with 'not responding' problems on PS Startup

    We have two similar editing workstations on which we run Adobe CS3 products as follows:
    SYSTEM 1
    Gigabyte GA-P35-DQ6
    XFX PVT80GTHF9 GeForce 8800GTS 640MB
    Intel Core 2 Quad Q6600
    Mushkin Hp2-6400 Ddr2 4gb Kit
    Western Digital Caviar HD 500G|WD 7K 16M SATA2 WD5000AAKS
    SILVERSTONE TEMJIN SST-TJ06S-W Silver Aluminum
    Seasonic S12 Energy Plus SS- 650HT Power Supply
    LG GGW-H20L Blu-ray Burner
    HP LP3065 30" LCD Display
    Turtle Beach Montego DDL 7.1 Dolby Digital
    Pioneer DVR-112D
    NEC Beige 1.44MB 3.5" Floppy Drive Model FD1231H
    ZALMAN 9700 LED 110mm 2 Ball CPU Cooler
    Black Magic Design Blackmagic Design BINTSPRO Intensity Pro
    Contour Shuttle-Pro
    SYSTEM 2
    Gigabyte GA-P35-DQ6
    Quadro FX4600 768MB 384-bit GDDR3 PCI Express x16
    Intel Core 2 Quad Q6600
    Mushkin Hp2-6400 Ddr2 4gb Kit
    Western Digital Caviar WD1001FALS 1TB 7200 RPM 32MB Cache SATA Hard Drive
    SILVERSTONE TEMJIN SST-TJ06S-W Silver Aluminum
    Seasonic S12 Energy Plus SS- 650HT Power Supply
    HP LP3065 30" LCD Display
    AuzenTech Auzen X-Fi Prelude 7.1 7.1 Channels PCI Interface Sound Card
    Pioneer DVR-116D
    NEC Black 1.44MB 3.5" Floppy Drive Model FD1231H
    ZALMAN 9700 LED 110mm 2 Ball CPU Cooler
    Contour Shuttle-Pro
    Both systems are running Win XP SP2 and are behind 'walled gardens' on our LAN, a private sub-net of workstation computers with no internet access (we have office computers for browsing and e-mail).
    While the two PCs are very similar, note that sound and video cards are different. Also system 2 does not yet have a Blu-ray writer.
    System 1 works great with all of the Adobe apps.
    System 2 experiences lengthy 'hangs' upon launch of several Adobe apps, including PhotoShop, Acrobat and, to a lesser extent, Premiere. What exactly happens is upon launch, on system #2, PhotoShop loads to the workspace, but hangs just as the palettes are being created. Time to this point, 3 seconds. Then, 60 seconds passes. The application's status in Task Manager changes to Not Responding. More time passes. Then the application comes back to life and is responsive again.
    On system #1, PhotoShop is ready to use in 3 seconds following the command to launch. The 90-second delay/hang does not occur.
    Logical deduction would suggest that the possible culprits are the video or sound card, these being different.
    I also note that when recording and playing audio in other applications, like SoundForge and WinAMP, momentary pauses or gaps in the audio playback and recording are noted. It takes about 30 minutes of listening to encounter one such hiccup. It was also discovered that during recording, samples were dropped, during an hour-long studio recording session. There is something not quite right with system #2.
    I was curious if anyone found a correlation between the Auzentech sound card and similar behavior where the app hangs and stops responding. Or anyone with the FX4600 graphics card having this problem?
    What could PhotoShop, Acrobat and Premiere be doing during startup that is resulting in the apps to stop responding for a while, then return to responsive state? I have been going nuts for 4 months troubleshooting and trying to fix this problem, with no results. I've turned off nearly every Windows service, checked Adobe preferences between the two machines, speed tested the RAID 0 arrays and system drives--all seems well--in fact, the 2nd workstation has faster hard drives than the first, so maybe it is a problem with some exotic timing issue where the data is available to PhotoShop too soon and it gets confused and hangs up for a while? I'm at a loss!

    I don't like the way OpenType looks on screen. I know it has some advantages, like a larger character set, but the hinting, or lack thereof, makes low resolution imagers like screens and inkjet printers produce less than great output. And my investment in Adobe fonts is in the many thousands of dollars, purchased back around 1991. I prefer PostScript fonts by a wide margin over OTF and TTF.
    WRT audio card, I removed the drivers, and installed RC8, the current version, but that did not help. I did note something curious though: rebooting with no audio drivers shaved 30 seconds off the boot time! The blue 'loading your personal settings screen' that usually stays up for 35 seconds, was there for 5 seconds then right to the desktop. It was the fastest I've ever gotten to the desktop on this machine. Once I installed RC8 drivers, the loading time became long again.
    I can be certain there's no file fragmentation problems. The temp drive has about half a terabyte of free space on it, and in fact, of the 2TB of system storage, only about 10% is in use (new system).
    But the latency is really noticeable with Sony SoundForge 9. Start playback and the wait can be anywhere from 1-3 seconds before play begins!
    On the other workstation with the TurtleBeach Montego DDL, playback is instant when I hit Play. Never a delay that's perceivable. I just don't like the way the Auzentech works. It may even be responsible for the problems I had with Premiere CS4, which I gave up on in March after a concerted struggle to solve the playback issues there. But I seem to be not the only one suffering with that anomaly. Though my underlying feeling is that something is not right with this system's hardware combination. One or more peripherals is just not playing well with the software, I suspect.

  • Re: More 'not responding' problems

    I am having a problem with Phtosohop 7.0 for MacX. (G4 with 8xxRam, 1.4Ghz) things were running along fairly smoothly until I upgraded to 10.4.9 from 10.4.8. Now photoshop is chronically "not responding" : Things seem to work well for a while and then all of a sudden I get the beachball of death and Phtshp7 will not quit gracefully.
    here are some relevant log messages.....when I start phtotoshop:
    May 9 19:02:24 MyDisk /Applications/Adobe Photoshop 7/Adobe Photoshop 7.0/Contents/MacOS/Adobe Photoshop 7.0: The "IgnoreForEvents" window property is obsolete. Use CGSSetWindowTags with kCGSIgnoreForEventsTagBit flag instead. Set a break-point on CGSLogMessage to find out where this property is set.\n
    When I loaded an image file and then duplicated it and closed the original I got the BBoD and after a shot at force quitting photoshop the following shows up in the log:
    2007-05-09 20:17:17.358 SyndicationAgent[277] WARNING: BestCalendarDateFromString - can't interpret: 'Wed 09 May 2007 09:08:35 -800'
    2007-05-09 20:17:17.404 SyndicationAgent[277] WARNING: BestCalendarDateFromString - can't interpret: 'Wed 09 May 2007 09:08:35 -800'
    2007-05-09 20:17:17.407 SyndicationAgent[277] WARNING: BestCalendarDateFromString - can't interpret: 'Wed 09 May 2007 09:08:35 -800'
    and this rolls outs at least 20 times. and photshop is DoA.
    any ideas?
    reggers,
    v
    theMACjunkyard,4's and 4/3 and 7200   Mac OS X (10.4.9)  
    theMACjunkyard,4's and 4/3 and 7200   Mac OS X (10.4.9)  

    A photoshop upgrade is unfortunately not a budgetary option right now . However, it turns out that the error message came from Safari and after deselecting RSS options, (renering it inactive) the problem went away. interesting to note that it appears that a repetitve error message (condition?) can indeed cause other problems.
    vilppu

  • Sony Bridge on Mac Not Responding

    When connecting to Sony Bridge (3.8.4) on Macbook Pro with Yosemite 10.10.1 everything syncs fine. But, responding to the new firmware update available, Bridge hangs with message "Talking with server", never continues, and cannot be closed without force quitting. I note this has been an issue for prior versions of Bridge and updates. Tried reinstalling Bridge but didn't help. Seems broken, or perhaps the server is just the victim of the recent Sony hack. Anyone else have success updating?

    Well that was really helpful. Spoiler Alert: According to information from support agent, Sony appears to be pushing out firmware upgrade notices via email and Bridge even when they are not available. Underscoring complexity of relationship between device manufacturers and service providers in US or ...?
    Transcript follows:
    Chat Transcript
    Please wait while we find an agent to assist you...
    You have now been connected to an agent.
    Agent Melvin:  Hi John, thanks for choosing Sony Xperia™ Chat Support. My name is Melvin your Xperia™ Support Representative. Would you please provide me with your full name and email address?
    Agent Melvin:  Thank you. What is the model of your device and your service provider?
    John:  Z3 Compact, Consumer Cellular (uses ATT network).
    Agent Melvin:  Thank you very much, I see that you have issues with your Bridge, right?
    John:  As stated.
    Agent Melvin:  Lets see, what android version are you running?
    John:  stand by
    John:  4.4.4
    John:  Build Number 23.0.A.2.93
    Agent Melvin:  And the issue is presented trying to update your device, right?
    John:  correct.
    Agent Melvin:  Well, that would be understandable since you already have the latest update available for your device.
    John:  Hmmm Why am I receiving emails from Sony to update my firmware
    Agent Melvin:  You mean, to your mail?
    John:  Email and when connecting via Bridge. Latest version is: 23.0.1.A.5.77, Not 23.0.A.2.93.
    Agent Melvin:  Well, please note that updates are released at different times based on region, service provider, phone model, and purchase date. When the update becomes available for you specifically based on those factors, your phone will alert you with a notification.
    John:  In other words, the message I'm receiving from Sony's own software and their emails is incorrect, right? Why is Sony wasting my time.
    John:  And, just for the record, I purchased my unlocked phone from Sony directly, not through a service provider. They don't sell this phone and only supply a sim card. Sony didn't respond to their inquiries for stocking the Z3.
    Agent Melvin:  Well, my best suggestion would be to dismiss those messages.
    John:  Thanks for you information. Goodby.
    Agent Melvin:  Thank you for choosing Sony Xperia™. I'm happy I could help. Have a great day! If you require more information please visit our Support Forum at http://talk.sonymobile.com/community/support
    Your session has ended. You may now close this window.

  • Why does the camera not respond to tapping?

    I have used  UITapGestureRecognizer so that an instance of UIImageView will respond to tapping when applied to images.  However, so far, the camera does not respond to anything I try in this regard.
    Could it be that the camera view does not respond to tapping?
    Thanks.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem(s)?
    After testing, reboot as usual (i.e., not in safe mode.)

  • Sony xperia m2 does not charge or turn on at all

    sony xperia m2 stop wotking suddenly. does not charge and light does not show that its charging and does not turn on at all help please it under manufacturer warnty

    I have had the same problem with my Xperia L just 2 weeks after i bought it... I try all things mentioned above but nothing helped so I take it back to T-Mobile (they pass it to Sony repair centar) they said that it's battery problem but after long 10days they give me brand new XL. It was some problem in matherboard.
    Interesting fact is that they give me unlocked phone(first one was locked on T-Mobile).

  • Sony xperia z2 dk36 dock purchasing problems very annoying

    Dear Sony,
    I have several complaints sony accesory and could not find/purchase dk 36 magnetic charging dock in our country Turkey, xperia contact center also could not help me. Here is my correspondence with sony;
    ME:
    Message:
    I just purchased xperia z2 - D6503 from online reseller in our country on 30.10.2014 Turkey, but I am not satisfied accessory out of the box; box contains just entry level headphones, ac adaptor and usb cable..
    One of my friends (and same device sold that european countries) purchased same model device with lower price and its box contains full accesory; DK36 magnetic charging dock, mdr-nc31em headphones and front glass protectıve film. I wish to have these accesory (at least charging dock) because I paid higher price in our country and I am not satisfied sony's sales policy.
    Sony:
    Dear Levent HIZBUL,
    Thank you for contacting Sony Xperia support.
    First of all we are sorry to answer your mail with delay.
    With regards to your inquiry, we would like to inform you that Sony Mobile products' sales kit contents may vary depending on market or country/region. Sony Xperia™ Z2 mobile phones' sales kit contents in Turkish markets include MH750 headset, charger, USB cable, display protector and documentation.
    Should you require any further assistance please contact us through the telephone number +90 212 473 77 77. For more information on our products, services and support please visit www.sonymobile.com.
    Please be aware that if you do not respond within 7 days of this email your query will be automatically closed. Any further communications will not reach our support and a new query will need to be raised.
    Kind Regards,
    Gülçin Armağan
    ME:
    Hello,
    I disappointed that sales kit strategy, so where can I buy a dk36 magnetic charging dock and how much is it cost?
    Sony:
    Thank you for contacting Sony Xperia support.
    First of all we are sorry to answer your mail with delay.
    With regards to your inquiry, Sony Mobile Products become available in the Turkish market via Sony Centers and our company's official sales partners (operators and their chain of mobile stores). When Sony Mobile announces the release of a Product, the retailers carry out their orders as they wish, Sony Mobile delivers them the Products and this way they become available to end-users.
    Please note that the availability of our products depends on the retailers' orders and stock while price depends on each company/shop's pricing policy. Therefore we cannot provide you with information about a specific price. Lastly, we would recommend you to conduct personal research in Sony Centers and mobile stores in order to find and purchase the Sony Xperia product you want.
    If you would like to find and purchase Sony Mobile accessories please contact your nearest Sony Center.  You can find the nearest Sony Center from www.sony.com.tr web site.
    Should you require any further assistance please contact us through the telephone number +90 212 473 77 77. For more information on our products, services and support please visit www.sonymobile.com.
    Please be aware that if you do not respond within 7 days of this email your query will be automatically closed. Any further communications will not reach our support and a new query will need to be raised.
    Kind Regards,
    Gülçin Armağan
    Sony Xperia Support
    ME:
    I could not find any information for xperia z2 dk36 dock neither online store nor other sony stores, this indicates I can not buy original sony accesory in our country and this is very annoying.
    I satisfied xperia z2 product but not satisfied sony’s poor after sales support.
    I noticed that sony really do not care its customers especially in our country.
    I disappointed again and I am tired my complaints to sony so I am ending this conversation.

    Hi, Sony is correct with regards to different accessories being avaible in different countries......with regards to the magnetic charger have you looked at other forms of purchasing it from other retailers for instance Amazon or eBay etc?
    Not 100% sure which online retailers are available where you live but i'm sure there must be some retailers offering it.
    Good luck 

Maybe you are looking for

  • Application crashes daily

    Hello a few times a day my Minecraft application crashes and brings up this huge apple crash report. I was wondering if anyone can tell me why this is happening. It  started doing this a few days ago. This is not a minecraft craft it is an apple cras

  • Printing file name with Preview

    can anyone help me find out if there is a way to print the name of a file when printing out of Preview? i sometimes print one page or even a number of files to a page and would like to try and see if there is a way to put the file name next to the im

  • How to put Color on JInternalFrame?

    Hi I have a internalframe ... when it is maximized and selected we found it that a title is in blue color(That is a indication that this internalframe is selected). The same way i have minimized my internal frame .. but now even on dragging it the co

  • Production order number in BATMAS03 idoc??

    Dear all, I am working with IDOCs and i require to have the link between a production order and its batch. We have configured LOIPRO and BATMAS (BATMAS03) but i dont see in LOIPRO the batch number or in BATMAS the production order number. Is there a

  • Deprovision Clients to use Apple's default Software Update Server

    I have our macs set-up to use our local SL Server's "Software Update Server" - now 2 macs are being removed the local environment, and taken home with the employee's. The only real change that I see needed, is to change the software update server fro