Sort field in equipment main screen

We have an equipment having some validity dates(Valid from: 20.11.2009 & valid to: 31.12.9999) . Whenever we enter sort field in the Location tab the validity start date changes to todays date (Valid from:10.06.2009). How we can avoid this changes of dates. What is relation of sort field with valid from date ?

Hi,
It appears you have the sort field marked as relevant for equipment usage period. This will cause a new usage period with valid from date to be set each time the value of this field is changed.
You can check customizing as follows:
Plant Maintenance and Customer Service
Master Data in Plant Maintenance and Customer Service
Technical Objects
   Equipment
   Equipment Usage Period
   Define History-Related Fields
The field to look for is EQFNR.
-Paul

Similar Messages

Use of Sort Field in equipment Master

Dear All
What is the use of SORT field in Equipment Master Record

Dear Kumar Sahoo,
This field is for identification purpose and generally give similar technical objects
example:if you have so motors like lathe and drilling and lifting and milling etc thease all motors are same motors and if you want see the list you can give sor name then see, otherwise you have to give each number and find out
some more benefit is you can list sorting and unic identification of similar objects
generally using internal purpose, i mean there is no relation of external procurement or warranty or any outside of company activiteis.
Hope this may helps you
Prem

Moving Custom fields to the main screen in CUP

Hi Gurus,
I am wondering if there is a way to move a custom field to the main screen like under general information instead of it being in the more section. We have a custom field which would be mandatory, So it would be nice to have it on the main screen.
Thanks,
Chinmaya
Edited by: chinmaya prakash on Nov 3, 2010 6:38 PM

Hi,
There is no way to achieve this. As per the desgin, CUP adds all the standard field to main screen and custom fields under more section.
Alpesh

SAP Work Manager customization - adding a new field to equipment details screen (Syclo Agentry)

Hi Experts,
I am trying to add a field (NAME1) on the Equipment details screen under work orders in work manager 5.3 application.
I have performed the following steps, but I am getting an error while connecting to the application.
1) Create extension for Equipment class to add a new field.
2) added the new field (Name1) as the property to the standard object Equipment.
3) Added the field on the screen.
4) Added the field (name1) to the complex table ctEquipment.
5) Added the JAR file to Agentry.ini file.
6) Changed the Class mapping for parameter "Equipment" under group "SAPOBJECT" to point it to the custom (Extended) class.
7) Changed the class mapping for complex table parameter "ctEquipment" under group "CT_SAPOBJECT" to point it to the custom class.
8) after publishing the changes and re-starting the server, I get following error.
the log file generated (message.log) also has the same description.
What am I missing here? Any help would be really appreciated.

Hi Emanuel,
Thanks for looking into this issue.
I have performed the following steps as suggested by you, still it doesn't seem to work and gives the same error.
Below are the changes done on the ECC Side.
1) Copied the standard equipment class /SYCLO_CL_PM_EQUIPMENT1_DO to custom class ZSYCLO_CL_PM_EQUIPMENT1_DO. Changes made in the GET Method to get custom equipment related data
2) Modified the standard equipment structure /SYCLO/PM_EQUI_STR by adding one custom field
3) Configured this custom class as the object handler in the equipment mobile data object
4) Configured this custom class as the object handler for the equipment complex table
5) We are still using the standard BAPI Wrapper itself for getting the equipment data and the added field is reflected in the BAPI Wrapper table parameter
Is there something we are missing?

How to add a Custom field in the Standard SAP Sales Order main screen

Dear Experts,
We have a requirement of adding a Custom field in the Sales Order screen. I know how to add the Customer field in the Additional data B tab of the Sales Order Header Screen as that is the screen user exit provided by SAP. Can someone tell me how to add the Custom field in the Sales Order main screen. Program Name - SAPMV45A and Screen Number - 4001. What is all I need to take care.
Thanks,
SNK.

I have not added the Custom filed in the main screen and added in the Additional data B screen. So closing the message.

Add custom field column in VL03N main screen

Hi,
We added a new field to LIPS via an append structure but would like it to appear in the main screen next to the quantity. I keep reading about transaction variants and SHD0 but nothing I see there helps me know how to change the order or contents of the columns. How can I get my custom field into the display as an additional column/field? If SHD0 is the answer, please provide some specific steps on how to add columns to the table control as everything I've found is very vague.
The field is now in LIPSVB, but it is not in LIPSD. Not sure if that matters.
Thanks for any help you can offer.

Hi,
For adding fields at the item level to VL01N Transaction you can use the BADI LE_SHP_TAB_CUST_ITEM.
I dont think it is a good idea to add fields right next to the standard fields in the transaction. A separate tab should be created which will include all the customer fields.
Check the documentation of this BADI for more details. If you want this field only in VL03N transaction then you can implement the BADI accordingly so that it triggers only for VL03N transaction.

BGM: Master Warranty sort field

Hi all,
I have search all over the place in order to know the function of the "Sort Field" in the Master Warranty. If I do have several counters, it stated that I can set priorities of my warranty counters by using free defined sort field.
But how do I use is and where does it reflect then?
I do attached the master warranty in my Equipment via IE02 and where does it display the priorities of my warranty counters?
I also do realize that the counter link AND & OR in master warranty can be use in order to stated that my equipment is still under warranty by line items or overall. This is very useful, however the icon of warranty check status in IE02, is changing from "not valid" icon to "valid" icon once click on warranty details. Something wrong isn't?
Hope all experts can help me on this. Thanks
Regards,
effie7am

Hi,
The sort field does not have any effect on the validity of the warranty.
The master warranty maintenance provides two tabs - services and count. For each service line you can have multiple entries, these are the conditions which may be linked with a AND or OR.
To use a vehicle as an example. If there is a 50,000 KM / 36 month warranty. This can be defined by creating one entry on the initial master warranty services tab. The two counters are added to count tab, the AND condition is selected. Once one of these counters is reached the warranty is expired.
If your vehicle comes with a further warranty (perhaps a 5 year anti-rust extension), you can add this as a second entry on the initial services screen. Now to start with both warranty items are valid, after 36 months the first item becomes invalid. Now item 1 is expired and Item 2 is still valid. At this point the complete warranty is only partially valid (yellow icon).
-Paul

How can I move pictures from Finder to a folder on my main screen?

I'm trying to put a bunch of photos that are currently in Finder into a folder on my main screen so I can drag them easily onto photo printing sites. How do I do that?
Thanks!

Thanks! But I have like 100 pictures………is there a way to do them as a group instead of individually? I also want them in some sort of folder not just 100 individual photos all over the main screen. Is there a way to create that?

Sort field in VF31

Hi,
Pls anybody let me know what is the functionality of field "Sort order" in VF31 screen?
what is the meaning of this feild and for what purpose we use this field?
thanks & Regards,
Srikanth.P

Hi,
We have 5 options in this field "SORT ORDER"...
01 Billing document/Item/Output type
02 Output type/Billing document/Item
03 Partner function/Partner no./Output type
04 Sort fields 1-3
05 Output type/Sort fields 1-3
Let me know why we use these options?
Regards,
Srikky

Sort field in maintenance order

Hello;
I want to make sort field in maintenance order as a mandatory field. But if I make it as a mandatory field, system still allows me to save the order as long as I have not clicked 'Location' tab. So there is no positive control over this field. May I know, how do I achieve this? I have even tried to put order type as the influencing field but it does not help.
Points assured.
Regards
Hemant

Hello Hemant,
access to the SAP service marketplace via www.service.sap.com to create an OSS message. Choose link "product errors". Therefore you need an OSS user and you have to be authorized to create OSS messages.
To create an user-exit, you have to go to transaction CMOD. There you have to create a project and assign the enhancement you want to use (I'm not really sure, but I think IWO10009 is the correct one in your case - you can search the user-exits via transaction SMOD - search for IWO*).
After this you have to implement your coding and then you have to activate the project.
The implementation of the user-exit should be done by an ABAP developer.
By the way - I've had a look at the OSS. There's note 768576.
Reason and Prerequisites
The problem is caused by a missing function.
Influences set via field selection will only become effective if a screen with the corresponding fields is processed. You must also refer to the documentation defined in the corresponding Customizing area. For the location & account assignment data, no additional check is (such as with the general order header data) is realised during the saving.
Prerequisite
Via field selection you declared fields of the location & account assignment data as mandatory field, and no screen that contains these fields was passed.
Solution
By means of the example code, you must implement a corresponding mandatory field check via customer enhancement IWO10009 at the time of the order backup.
1. Create subroutine Z_IWO10009_GET_DATA_FOR_FAW in program SAPMILA0. It would be best if you create an own include ZMILA0F1 for this so that you will not have any unnecessary expenditure for future Support Packages (via Transaction SE80).
FORM Z_IWO10009_GET_DATA_FOR_FAW.
CALL FUNCTION 'CO_IH_GET_HEADER'
       IMPORTING
                 CAUFVD_IMP = CAUFVD.
CALL FUNCTION 'CO_IH_GET_ILOA'
       EXPORTING
                 CAUFVD_IMP = CAUFVD
       IMPORTING
                ILOA_WA    = ILOA.
ENDFORM.                    "Z_IWO10009_GET_DATA_FOR_FAW
2. Create the following source code in customer enhancement IWO10009:
STATICS: XTFAWF LIKE TFAWF OCCURS 0 WITH HEADER LINE.
tables: tfawf.
DATA: wa_screen    LIKE screen.
FIELD-SYMBOLS: 'A'.
perform Z_IWO10009_GET_DATA_FOR_FAW(SAPMILA0).
if xtfawf[] is initial.
    SELECT * FROM TFAWF INTO TABLE XTFAWF
             WHERE PROG = 'SAPMILA0'.
endif.
LOOP AT XTFAWF WHERE CUST_M = 'X'.
    CALL FUNCTION 'FIELD_SELECTION_INFLUENCE'
         EXPORTING
              dynprogruppe = '7   '
              mode        = 'C'
              modulpool    = 'SAPMILA0'
              fieldname    = XTFAWF-MFELD
         IMPORTING
              input        = wa_screen-input
              output      = wa_screen-output
              active      = wa_screen-active
              required    = wa_screen-required
              intensified = wa_screen-intensified
              invisible    = wa_screen-invisible
         EXCEPTIONS
              OTHERS      = 1.
    if wa_screen-required = 1.
      clear lv_mfeld.
      lv_mfeld = 'CAUFVD_IMP-'.
      case XTFAWF-MFELD.
        when 'ILOA-AUFNR'.
          lv_mfeld+11 = 'IAUFNR'.
        when 'ILOA-KOKRS'.
          lv_mfeld+11 = 'IKOKRS'.
        when 'ILOA-BUKRS'.
          lv_mfeld+11 = 'IBUKRS'.
        when 'ILOA-GSBER'.
          lv_mfeld+11 = 'IGSBER'.
        when 'RILA0-ARBPL'.
          lv_mfeld11 = xtfawf-mfeld6.
        when others.
          lv_mfeld11 = xtfawf-mfeld5.
      endcase.
      ASSIGN (lv_mfeld) TO IS INITIAL.
        Message E461(IW)
        with 'Mussfelder der Standort&Kontierungsdaten füllen'.
        EXIT.
      ENDIF.
    endif.
endloop.
endif.
3. Activate the changes
Correspondingly you can implement this solution also for the order release, for example, via customer enhancement IWO10002.
Bear in mind that this is a source code proposal. It might be useful or necessary to adjust this source code to special applications.
Best regards
Stephan
Edited by: Stephan Theis on Jan 5, 2008 11:20 AM

How to Add a new fields in the selection screen of LDB.

Hi All,
I want to add a new fields in the selection screen of LDB & then i need to select the data for that fields.
So could you please tell me for that where i need to add the code for selecting the data.
Thanks
Roli

Hi
welcome to SDN forum
If you are designing your own LDB with your own tables you can define tree structure and then the selection screen for the tables
if you wants to modify the std LDB of SAp means take the access key and to modify that code
if you add the extra field you have to modify the where conditions in the code also
see the doc
A logical database is a special ABAP/4 program which combines the contents of certain database tables. You can link a logical database to an ABAP/4 report program as an attribute. The logical database then supplies the report program with a set of hierarchically structured table lines which can be taken from different database tables.
LDB offers an easy-to-use selection screens. You can modify the pre-generated selection screen to your needs. It offers check functions to check whether user input is complete, correct, and plausible. It offers reasonable data selections. It contains central authorization checks for data base accesses. Enhancements such as improved performance immediately apply to all report programs that use the logical database.
Less coding s required to retrieve data compared to normal internel tables.
Tables used LDB are in hierarchial structure.
Mainly we used LDBs in HR Abap Programming.
Where all tables are highly inter related so LDBs can optimize the performance there.
Check this Document. All abt LDB's
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.highlightedcontent?documenturi=%2flibrary%2fabap%2fabap-code-samples%2fldb+browser.doc
GO THROUGH LINKS -
http://www.sap-basis-abap.com/saptab.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9bfa35c111d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9b5e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c6/8a15381b80436ce10000009b38f8cf/frameset.htm
/people/srivijaya.gutala/blog/2007/03/05/why-not-logical-databases
Re: **LDB**
www.sapbrain.com/FAQs/TECHNICAL/SAP_ABAP_Logical_Database_FAQ.html
www.sap-img.com/abap/abap-interview-question.htm
www.sap-img.com/abap/quick-note-on-design-of-secondary-database-indexes-and-logical-databases.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9b5e35c111d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/db9bb935c111d1829f0000e829fbfe/content.htm
Gothru the blog which provides info on LDB's:
/people/srivijaya.gutala/blog/2007/03/05/why-not-logical-databases
Sample code
TABLES: SPFLI,
SFLIGHT,
SBOOK,
SCARR.
START-OF-SELECTION.
GET SPFLI.
WRITE:/ SPFLI: , SPFLI-CARRID, SPFLI-CONNID,
SPFLI-AIRPFROM, SPFLI-AIRPTO.
GET SFLIGHT.
WRITE:/ SFLIGHT: , SFLIGHT-CARRID, SFLIGHT-CONNID, SFLIGHT-FLDATE.
GET SBOOK.
WRITE:/ SBOOK: , SBOOK-CARRID, SBOOK-CONNID,
SBOOK-FLDATE, SBOOK-BOOKID.
GET SFLIGHT LATE.
WRITE:/ GET SFLIGHT LATE: , SFLIGHT-FLDATE.
Regards
anji

I recently did the iOS 7.0.2 update, now I'm unable to purchase apps. "App could not be purchased at this time. Please try again later. ". I have tried a few of the suggestions and nothing has worked. Reset,change auto lock time on main screen, now what??

I recently did the iOS 7.0.2 update, now I'm unable to purchase apps. "App could not be purchased at this time. Please try again later. ". I have tried a few of the suggestions and nothing has worked. Reset,change auto lock time on main screen, change language setting. Now what???

This sorted it for me:
Backup your iPhone to iCloud (I believe backing up to iTunes will work too). Now go to "Settings --> General --> Reset --> Erase All Content and Settings" to completely restore your iPhone to factory settings. Assuming you've backed up to iCloud, you'll be asked when setting up your iPhone if you want to restore from an iCloud backup. Choose that option and once your iPhone has restored itself from your backup, this annoying problem will finally be gone! (was for me anyway).
To restore from an iTunes backup, connect your iPhone to your computer, load iTunes. Click the File menu and select Devices > Restore from Back up.

How do I limit what movies are displayed at the top on the main screen

Is there any way to limit what movies are displayed at the top on the main screen when menu Computers are selected?
Currently it shows ALL of the content in the Movies folder in iTunes, but I would like to not show my 1 million 5-second videoclips and only the "real" movies.
Any suggestions?
Thanks in advance
Bjoern Dirchsen

I think you are right. It's the latest videos added that are displayed first. Makes sense.
I'm using a PC so it's a bit hard to work with iPhoto . However, your comment did give me a hint to how to solve the problem.
I moved all my video-clips out of my Movies folder and into my Pictures folder.
Then I changed Photo Sharing in Itunes to include Videos
And voila! The main screen now shows only my "real" movies. Sorted by latest added - but I guess that's the best we can do.
Thanks for a super-fast answer.

Using Cap6, need to create menu screen that allows user to click a button, branch to other screens, and return to main menu. When returning to the main screen the button that was clicked will be grayed out or inactive. How do I do this? I created image

I am trying to emulate a piece of equipment. I need the user to be able to click on specific buttons that will take the user to another screen(s). After viewing those screens the user will be directed back to the main screen where the user would know which buttons had been pressed and which still needed to be pressed. I create image buttons with the 3 states - that worked except when the user returns the slide is reset and so the user does not see the 3rd state of the button. How can I get that 3rd state to stay after user returns to the main screen?

Hi Elizabeth,
Since I just did this morning what you are currently attempting to do, I thought I'd share my method. I must provide a disclaimer and tell you that I am not an expert in Captivate advanced actions--like you, I am still figuring them out. However, I am happy to share here anything I have learned thus far.
First, here is what my initial slide looks like (see interaction slide below). I created all of the icons (including the 'grayed out' icon on the second screenshot) in a few minutes using Adobe Illustrator. The icons have been imported as custom multi-state buttons so that I could have the desired effect when the user hovers over the image--the yellow 'explore' flag appears only when the mouse is over the icon. When the learner click either image, they are sent to the corresponding slide. Once both slides are viewed, a 'continue' button will appear at the base of the screen (something I've not figured out--I sent an email to Lieve begging for some guidance).
The initial slide (interaction slide):
Second, here is a depiction of what happens when the learner returns to the interactive slide from the content slide (see image below): Once the learner visits the 'Battery Content' slide and then returns to the interaction slide, the images have changed. The multi-state button is hidden (through the advanced action), the replacement image (the image with the completed banner over it) is shown, and a hidden click box to allow the user to return to the previously visited page (just in case they desire to do that) is "shown" to allow navigation since the button is no longer there (because it is magically hidden).
Content Slide 1:
Remember, there may be an easier way to do this in Captivate. I am using Cp6 for this module.
1. I created two user variables as follows
Name: v_batteryExplore
Value: 0
Name: v_fuelExplore
Value: 0
2. I created an advanced action for each as shown below (showing only one--duplicate the first and change the names to match the content):
Credit: I learned these steps from @Lilibiri and Dr. Pooja Jaisingh!
I have also noticed that it matters where the buttons are located on the timeline. It seems best to have buttons above all other content. Not sure why, but I have had images not appear when I have not done this.
And the last step you do not want to forget; you need to remember to tell Captivate to use the action.
As a final note, remember that the elements you do not want to appear on the initial screen must not be initially visible. Make sure to set them to invisible by removing the checkmark in the 'Visible in output' box located next to the button name. In my case, the image of the completed battery and the invisible button to allow a revisit of content was initially hidden. Here is a final screenshot of my timeline for this interaction. I hope this information helps you!

Selection screen as subscreen in module pool main screen

hello
i having problem with a module pool and a selection screen subscreen , i have my main screen 100 in my module pool
i create a sub screen area , then in my top include i define a seleccion screen as subscreen 150
i define some paramets and select-options ( for the select-options feature is because i choose use the subscreen )
so far here is OK , the problem is when i fill the subscreen data and press a pushbutton define in the main screen ( 100 )
the field are getting cleared ( BTW i call the subscreen in the PBO of the main screen ( 100 ) using call SUBSCREEN SUB_AREA INCLUDING SY-REPID '150'. ) so my question is how i can do for save the data filled in the subscreen ?
thanks

i find the solution of my own question:
in the first line of the PAI event of the main screen ( where you call the subscreen ) need add 'call subscreen SUB_AREA_NAME_HERE.

Sort field in equipment main screen

Similar Messages

Maybe you are looking for