Source and destination are deep structures.. can't seem to map the detail table

So, both my source data structure and my destination structure are very similarly built:
They both have a HEADER and BODY component. The HEADER has the standard AIF fields (MSGGUID, NS, IFNAME, IFVER).
I have defined the BODY as a deep structure composed of a Header Structure + a Detail Table. Each row in the BODY has a structure with a few header fields, then a table of detail data attached to it.
In my Structure Mappings, I've created 2 rows:
The first to map BODY-HEADER to my header structure.
The second to map BODY-DETAILS to my details table. Here, I've chosen "Indirect Mapping".
Selecting that row and navigating to "Define Field Mappings", I choose my destination table (DTL) and enter the Sub-table from my source structure.
At this point, I only have 1 action - to save the data in Ztables. I'm seeing that the header data is passed in fine. But there aren't any detail lines coming through.
Any ideas?
thanks alot.
RP.

Christoph,
In your reply, I only have the ability to perform the First Structure Mapping (please see the below screenshots):
Source Structure; BODY
Destination Structure: BODY
Field Mapping:
1. Field in Dest.Struc=HDR, Sub-Table = SCH_HEADER
2. Field in Dest.Struc=DTL, Sub Table = SCH_DETAILS
I presume I'm following your suggestion, but when I try to create the other two structure mappings, I only have HEADER or BODY as available options to choose from: I've attached screenshots of the F4 dropdown of the Source Structure and also the Destination Structure fields.
I believe this is because my Interface Definition is defined as a HEADER and BODY:
Source Data Structure
Destination Data Structure

Similar Messages

Setting up a project where source and destination are different formats

Howdy...
I'm a recent Vegas user who is just switching over to FCP6.
My question is this: When your source footage and destination format are two unrelated formats (for instance, HDV for source footage, Apple-TV H264 for destination), is it better to set up the project for your source footage format, or for your destination format?
In Vegas it didn't really matter, but it was good to use the destination format because you could preview what it'd look like at the size and frame-rate that you were going to end up in.
In FCP6, however, it seems that importing HDV into a H264 project may not work as well, becuase it wants to render the footage into the correct format before you can preview it.
FYI: The final desitnation is my gadget podcast, http://www.neo-fight.tv, which I have shot on HDV and edited on Vegas for the past year. FCP is very new to me, but I'm enjoying learning something new.
Let me know your thoughts...
Best,
Benjamin
http://www.neo-fight.tv [The TV Show for The 'Not-So-Geeky']
MacBook, MacPro Mac OS X (10.4.9)

Hi Benjamin - Prior to fcs 2 I worked in whatever my capture format was and will still continue to do that. I plan to use ProRes now - but if I was coming from an hdv source I'd prolly opt to capture using DVCPro HD and working in that.
"In FCP6, however, it seems that importing HDV into a H264 project may not work as well, becuase it wants to render the footage into the correct format before you can preview it."
As far as working in .h264 is concerned and combining other formats into that I really don't know.
h264 for me is a delivery format - so I'd opt to still work in native capture format and then transcode/convert at the end. More options ....

Could nt complete your request because source and destination files are the same

Hi, thank you for reading.
I'm having this problem and it's driving me nuts.
I'm actually following a tutorial that you can check out here: http://nightshifted.tumblr.com/post/2559360661/tutorial-paused-animations
basically I'm trying to do a animated gif with canvas (I'm sorry if my english is not so great). when I try to drag the layers into the canvas (step 2 of the tutorial), I get the error: "could not complete your request because source and destination are the same".
can anybody help me? I have both CS3 and CS5 and they the error appears in both.
thank you in advanced

I think they mean select the layers and frames and using the move tool, drag
inside the document (click inside the document window and drag) to move the
selected layers to the top half (transparent area), not to drag the layers from
the layers palette into the document, which would give that error.
MTSTUNER

How to keep sort order in Shuttle item's source and destination boxes?

I have defined a shuttle item on a page and the list of values in the source box is populated by a SQL with sort order specified. In the Settings of the shuttle item, Show Controls value is set to Moving Only instead of All. When a user moves selected values from the source box to the destination box or vice versa, the list of values does not maintain the original sort order. For example, if I have 26 values A through Z, a user can put value Z before A in the destination box. And when a user move A from the destination box to the source box, A is the last item in the source box. The reset button clears everything in the destination box and resets the source box to the original sorted list. This is not the solution that I am looking for. I would like to see the items in the source and destination boxes to maintain their original sort order all the time.
Is it possible?
APEX v4.0.1.00.03
Oracle 11g (v11.2.0.1.0)

Hi,
See if this post help
Re: Sort Shuttle Right
Regards,
Jari

Dbms_lob.getlength() returns different source and destination lengths

I am fairly new to PL/SQL so maybe this is an obvious problem but here goes. I am updating a clob field with a text file ~5KB in size. The field updates fine (as far as I can tell). Before I update the field, I open the source file as a bfile and then inquire the length using dbms_lob.getlength(). I then update the clob field using dbms_lob.loadclobfromfile(). This seems to work fine. However, when I use dbms_lob.getlength() on the destination object returned by dbms_lob.loadclobfromfile(), I get a length 3 characters less than then the source object (5072 vs 5075). Both the source and destination offsets are set to 1.
Probing on what documentation I could find, I found this at http://download.oracle.com/docs/cd/B28359_01/appdev.111/b28419/d_lob.htm#i998484:
"The length returned for a BFILE includes the EOF, if it exists. Any 0-byte or space filler in the LOB caused by previous ERASE or WRITE operations is also included in the length count. The length of an empty internal LOB is 0."
I did not create the source file and I believe it is a Unix type file (because of the lack of CRs) and I am running on Windows 7. I am also using 11g Express. Could the use of a Unix-type file for a CLOB on a Windows system be causing this character count difference?
Once I found this issue I can work around it. I just want to understand what is going on.
Thanks to all who look at this.

The EOF and the LF versus CR/LF could influence the count difference, yes.
Another explain could possibly be character set conversions. The BFILE I believe counts bytes, a CLOB would count "characters" - so if the source happens to contain a few multibyte characters (UTF), then the byte count would be larger than the character count.
To help you find the cause for your exact file, then I can suggest a couple of things you might do to explore the issue:
<li>Load the file into a BLOB instead of a CLOB and see what getlength() returns for the BLOB. BLOBs would also do byte counts and not try to treat the source as text.
<li>Save the CLOB back into the filesystem and compare the original file with the exported CLOB and check the differences with some filecompare tool.

Dynamic source and destination tables

Hi all
I've got to import 142 tables from csv into SQL 2008 on a regular basis.
I was looking at building a 142-part SSIS package to do this, then thought there must be a dynamic way of doing it.
Is there any way of dynamically changing the source and and destination tables?
The csv filenames will remain identical, the SQL tables will be the same names but with "_Staging" at the end of them (e.g. SRSection.csv will always go into SRSection_Staging).
I can then write MERGE statements to update the main tables from the staging data.
Any help on this would be greatly appreciated.
I get the the feeling I would need a FOREACH LOOP container but I'd really aprreciate a step-by-step guide if you can.

Please check this :- http://sql-bi-dev.blogspot.com/2010/07/dynamic-database-connection-using-ssis.html
STEP1:
To begin, Create two tables as shown below in on of the environment:
-- Table to store list of Sources
CREATE TABLE SourceList (
   ID [smallint],
   ServerName [varchar](128),
   DatabaseName [varchar](128),
   TableName [varchar](128),
   ConnString [nvarchar](255)
GO
-- Local Table to store Results
CREATE TABLE Results(
   TableName [varchar](128),
   ConnString [nvarchar](255),
   RecordCount[int],
   ActionTime [datetime]
GO
STEP 2:
Insert all connection strings in SourceList table using below script:
INSERT INTO SourceList
SELECT 1 ID,
'(local)' ServerName,
--Define required Server
'TestHN' DatabaseName,--Define DB Name
'TestTable' TableName,
'Data Source=(local);Initial Catalog=TestHN;Provider=SQLNCLI10.1;Integrated Security=SSPI;Auto Translate=False;' ConnString
Insert as many connections as you want.
STEP 3:
Add new package in your project and rename it with ForEachLoopMultipleServers.dtsx. Add following variable:
Variable
Type
Value
Purpose
ConnString
String
Data Source=(local);
Initial Catalog=TestHN;
Provider=SQLNCLI10.1;
Integrated Security=SSPI;
Auto Translate=False;
To store default connection string
Query
String
SELECT '' TableName,
N'' ConnString,
0 RecordCount,
GETDATE() ActionTime
Default SQL Query string.
This can be modified at runtime based on other variables
SourceList
Object
System.Object
To store the list of connection strings
SourceTable
String
Any Table Name.
It can be blank.
To store the table name of current connection string.
This table will be queried at run time
STEP 4:
Create two connection managers as shown below:
Local.TestHN: For local database which has table SourceList. Also this will be used to store the result in Results table.
DynamicConnection: This connection will be used for setting up dynamic connection with multiple servers.
Now click on DynamicConnection in connection manager and click on ellipse to set up dynamic connection string. Map connection String with variable
User::ConnString.
STEP 5:
Drag and drop Execute SQL Task and rename with "Execute SQL Task - Get List of Connection Strings". Now click on properties and set following values as shown in snapshot:
Result Set: Full Result Set
Connection: Local.TestHN
ConnectionType: Direct Input
SQL Statement: SELECT ConnString,TableName FROM SourceList
Now click on Result Set to store the result of SQL Task in variable User::SourceList.
STEP 6:
Drag and drop ForEach Loop container from toolbox and rename with "Foreach Loop Container - DB Tables". Double click on ForEach Loop container to open Foreach Loop Editor. Click on Collection and select
Foreach ADO Enumerator as Enumerator. In Enumerator configuration, select User::SourceList as ADO object source variable as shown below:
STEP 7: Drag and drop Script Task inside ForEach Loop container and double click on it to open Script Task Editor. Select
User::ConnString,User::SourceTable as
ReadOnlyVariables and User::Query as
ReadWriteVariables. Now click on Edit Script button and write following code in Main function:
public void Main()
try
String Table = Dts.Variables["User::SourceTable"].Value.ToString();
String ConnString = Dts.Variables["User::ConnString"].Value.ToString();
MessageBox.Show("SourceTable = " + Table +
"\nCurrentConnString = " + ConnString);
//SELECT '' TableName,N'' ConnString,0 RecordCount,GETDATE() ActionTime
string SQL = "SELECT '" + Table +
"' AS TableName, N'" + ConnString +
"' AS ConnString, COUNT (*) AS RecordCount, GETDATE() AS ActionTime FROM " + Dts.Variables["User::SourceTable"].Value.ToString() +
" (NOLOCK)";
      Dts.Variables["User::Query"].Value = SQL;
      Dts.TaskResult = (int)ScriptResults.Success;
catch (Exception e)
      Dts.Log(e.Message, 0,
null);
STEP 8:
Drag and drop Data Flow Task and double click on it to open Data Flow tab. Add OLE DB Source and Destination. Double click on OLE DB Source to configure the properties. Select
DynamicConnection as OLE DB connection manager and
SQL command from variable as Data access mode. Select variable name as User::Query. Now click on
columns to genertae meta data.
Double click on OLE DB Destination to configure the properties. Select Local.TestHN as
OLE DB connection manager and Table or view - fast load as
Data access mode. Select [dbo].[Results] as Name of the table or the view. now click on
Mappings to map the columns from source. Click OK and save changes.
Finally DFT will look like below snapshot:
STEP 9: We are done with package development and its time to test the package.
Right click on the package in Solution Explorer and select execute. The message box will display you the current connection string.
Once you click OK, it will execute Data Flow Task and load the record count in Results table. This will be iterative process untill all the connection are done. Finally package will execute successfully.
You can check the data in results table:
Here is the result:
SELECT *
FROM SourceList
SELECT *
FROM Results
Regards, Pradyothana DP. Please Mark This As Answer if it solved your issue. Please Mark This As Helpful if it helps to solve your issue. ========================================================== http://www.dbainhouse.blogspot.in/

I have 2 imac computers and here are my questions: first, how to I transfer the information from my contact directory from my old imac into my new imac and once the information is transfered how can I print it? Second: I have a large music collection in m

have 2 imac computers and here are my questions: first, how to I transfer the information from my contact directory from my old imac into my new imac? Once the information is transfered how can I print it? Second: I have a large music collection in my old Imac computer how do I transfer this information to my new computer? Also how can I share this information with other computers at home?

I think you may find helpful information here:
A Basic Guide for Migrating to Intel-Macs
The Knowledgebase article Intel-based Mac: Some migrated applications may need to be updated refers to methods of dealing with migrating from PowerPC chips to Intel with the Migration Assistant safely. The authors of this tip have not had a chance to verify this works in all instances, or that it avoids the 10.6.1 and earlier Guest Account bug that caused account information to get deleted upon use of the Migration/Setup Assistant. However, a well backed up source that includes at least two backups of all the data that are not connected to your machine will help you avoid potential issues, should they arise. In event it does not work, follow the steps below.
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
Classic Environment, and subsequently any Mac OS 9 or earlier applications
Screensavers written for the PowerPC System Preference add-ons
All Unsanity Haxies Browser and other plug-ins
Contextual Menu Items
Applications which specifically require the PowerPC G5 Kernel extensions
Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior, TechTool Pro , SuperDuper , and Drive Genius work properly on Intel-Macs with Leopard. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries. Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
Intel In Macs
Apple Guide to Universal Applications
MacInTouch List of Compatible Universal Binaries
MacInTouch List of Rosetta Compatible Applications
MacUpdate List of Intel-Compatible Software
Transferring data with Setup Assistant - Migration Assistant FAQ
Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking will work better when moving from PowerPC to Intel Macs. The initial section below discusses Target Disk Mode. It is then followed by a section which discusses networking with Macs that lack Firewire.
If both computers support the use of Firewire then you can use the following instructions:
1. Repair the hard drive and permissions using Disk Utility.
2. Backup your data. This is vitally important in case you make a mistake or there's some other problem.
3. Connect a Firewire cable between your old Mac and your new Intel Mac.
4. Startup your old Mac in Transferring files between two computers using FireWire.
5. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
1. Set up a local home network: Creating a small Ethernet Network.
2. If you have a MacBook Air or Late 2008 MacBook see the following:
MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- What to do if migration is unsuccessful;
MacBook Air- Migration Tips and Tricks;
MacBook Air- Remote Disc, Migration, or Remote Install Mac OS X and wireless 802.11n networks.
Copy the following items from your old Mac to the new Mac:
In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder) /Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder) /Home/Library/Mail (copy the whole folder) /Home/Library/Preferences/ (copy the whole folder) /Home /Library/Calendars (copy the whole folder) /Home /Library/iTunes (copy the whole folder) /Home /Library/Safari (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist /Home/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in /Home/Documents/Microsoft User Data Also in /Home/Library/Preferences/Microsoft.
Credit goes to Macjack for this information.
If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
Written by Kappy with additional contributions from a brody.Revised 5/21/2011

Shall we trigger two or more even Datatarget, Source and IP are same

Hi,
Shall we trigger two or more jobs even Datatarget, Source and IP are same.
Kindly answer the same.
Regards
Priyanka Chowdary.

Hi ,
You can do it .
let me explain with Info Package
Info packages with Data Selection for same data source can be triggered at same time for which two different jobs will be created.
Thanks
Hari

HPCM custom driver use source and destination

Hi All,
I'm using HPCM 12.1.2, I need your help to create one custom driver that uses information from source and destination. I need to use 1 dimension of source and 2 of destination.
I have the situation bellow:
STAGE1 (SOURCE)
Dim1 Machine
Dim2 Account
STAGE2 (DESTINATION)
Dim1 Process
Dim2 Operation
Dim 3 Account
Measure: Time used in the Machine
The infromation is extracted:
Machine1 - Process1 - Operation1 = 10 Hours
Machine1 - Process1 - Operation2 = 9 Hours
Machine2 - Process1 - Operation1 = 13 Hours
How can I create one Driver that I could use these informations? It is possible?
Thanks in Advance
Diogo
Edited by: user10432898 on 15/05/2012 14:21

Hi Alex,
You have to increase the Max Row size limit in Xcelsius.
Goto >> File menu >> Preferences >> Increase the "Max Row Sixe" by default it will be 500 you can increase it as per the requirement.
Regards,
AnjaniKumar C.A.

TS3297 when I press the iTunes button on my ipod touch I get the message 'cannot connect to iTunes store' . My wifi is working fine, I can connect to safari & you tube, no parental setting in place, and time and date are correct. Can anyone help please?

When I press the iTunes button on my ipod touch I get the message 'cannot connect to iTunes store' . My wifi is working fine, I can connect to safari & you tube, no parental setting in place, and time and date are correct. Can anyone help please? I have restored my ipod to factory settings and rest it.

I also tried moving the date forward by a year and then moving it back to normal and it still doesn't work. i can't find an automatic update of time zones on my itouch to turn this off.

Hello. I am trying to change the colors on my ical. I have been able to select a calendar group, click "get info" and then "other" in the color options and which point a a lot of color options are available. HOWEVER, I can't seem to select the color.

Hello. I am trying to change the colors on my ical. I have been able to select a calendar group, click "get info" and then "other" in the color options and which point a a lot of color options are available. HOWEVER, I can't seem to select the color. I click on a new color and press enter and nothing happens...not sure what I am doing wrong.

What do you currently see?
Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
Use a compressed image type like PNG or JPG to save the screenshot.
Do you have the menu bar?
*Press the F10 key or tap the Alt key to bring up the hidden Menu bar.
Do you have any toolbars visible at all?
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Make sure that you do not run Firefox in full screen mode (press F11 or Fn + F11 to toggle; Mac: Command+Shift+F).
*https://support.mozilla.org/kb/how-to-use-full-screen
You can check for problems caused by a corrupted localstore.rdf file.
*http://kb.mozillazine.org/Corrupt_localstore.rdf

HELP I have lost all my motion 4 content from all the files, ive looked in all the files and they are all empty. can i get replacement content as I my dvds where stolen along. with my other laptop.

HELP I have lost all my motion 4 content from all the files, ive looked in all the files and they are all empty. can i get replacement content as I my dvds where stolen along. with my other laptop. any Ideas. would be a great help. For Motion 4.

Try a hard reset:- hold the home button AND the power switch - ignore the red "Slide to power off" and wait ubntil the iPhone powers down, and then restarts - at the Apple logo, release all the buttons and see if your contacts reappear.

Hi, i'm Architec and my basic programs are: Autodesk Architecture and 3D studio Max. Can i run it in the MacBook Pro 13.3-Inch (NEWEST VERSION) Thanks!!!

Hi, i'm Architec and my basic programs are: Autodesk Architecture and 3D studio Max. Can i run it in the MacBook Pro 13.3-Inch (NEWEST VERSION) Thanks!!!

You can but make sure you upgrade your RAM to 16GB - you can't do that through Apple...
Autodesk is a memory intensive program and the same goes with 3D Studio Max.....
Another suggeston if you must use a 13 inch is to buy the base 13 inch Macbook Pro and upgrade the RAM to 16GB and install a SSD to make it perform fast.
Another option is to get a refurbished 15 Inch Macbook Pro and do the RAM upgrade yourself...Advantage going 15 Inch is because it has it's own discrete graphics adapter rather than the built in Intel video.

Parametrized relation connections - don't work when source and target are different

Hi All,I have next problem:I am using parametrized relation connection firstConnection (user and (encripted)password are taken from parameter file). Here are values from param file: $DBConnection_source=firstConnection$DBConnection_source=firstConnection$ParamUser=svaba$ParamPwd=Dni32iRiH0Yjro1U04+RTC==  This is (source and target are same) working fine for years.
But now I need two different connection, i.e. source is (existing)   firstConnection and target is secondConnection. On both instances I have same user
  (svaba) with same password. I created second parameterized connection with user = $ParamUser    and password = $ParamPwd     Now, parameters are: $DBConnection_source=firstConnection$DBConnection_source=secondConnection$ParamUser=svaba$ParamPwd=Dni32iRiH0Yjro1U04+RTC== When run workflow, got error: ORA-01005: null password given: logon denied.I triede to change connections by entering values for password (not use parameters for password) got error: ORA-01017:invalid username/password:logon denied.When I am using same (parametrized) connection for source and target (any of these two) everything is fine. That is sign that connections are good. Does someone have any idea about this problem

Hi All,I have next problem:I am using parametrized relation connection firstConnection (user and (encripted)password are taken from parameter file). Here are values from param file: $DBConnection_source=firstConnection$DBConnection_source=firstConnection$ParamUser=svaba$ParamPwd=Dni32iRiH0Yjro1U04+RTC==  This is (source and target are same) working fine for years.
But now I need two different connection, i.e. source is (existing)   firstConnection and target is secondConnection. On both instances I have same user
  (svaba) with same password. I created second parameterized connection with user = $ParamUser    and password = $ParamPwd     Now, parameters are: $DBConnection_source=firstConnection$DBConnection_source=secondConnection$ParamUser=svaba$ParamPwd=Dni32iRiH0Yjro1U04+RTC== When run workflow, got error: ORA-01005: null password given: logon denied.I triede to change connections by entering values for password (not use parameters for password) got error: ORA-01017:invalid username/password:logon denied.When I am using same (parametrized) connection for source and target (any of these two) everything is fine. That is sign that connections are good. Does someone have any idea about this problem

HT4623 Trying to transition from my old iPhone 3G to a new iPhone 4S, and have some trouble getting all my photos transferred. Apps and music are okay, but can't get about 2/3 of my photos. Any suggestions?

Trying to transition from my old iPhone 3G to a new iPhone 4S, and have some problems getting all my photos/videos to transfer. Apps and music are fine, but can't get about 2/3 of my photos. Any suggestions?

Good afternoon
Are you getting any error messages? This might be helpful reading.
http://support.apple.com/kb/TS3697
Cheers

Source and destination are deep structures.. can't seem to map the detail table

Similar Messages

Maybe you are looking for