Source Data Component

hi,
i am trying to figure out what this component actually does in cx 4.5 pro.
below is what is inthe online help file, but i do not understand it.
"A component that has no visual interface. Users can push data into other cells by changing the value of the component's Selected Index."
my other question is under what conditions would one use the source data component?
thank you
tracy

i just realized that i posted another question on the same topic, so , i'm closing this one because it can't be deleted. sorry for the double posting.

Similar Messages

Source Data Component in Xcelsuis 2008

How can i use source data component? can i have a full description about this utility?
Thanks and Best regards

Hi Lutfi,
Source Data is a component that has data insertion function but no interactive interface. At design time, Users can set the insertion type, the source range and the destination range, like charts or selectors. If users set the u201CSelected Item Indexu201D in property sheet, the source data with the index will be inserted to the destination at run time.
For advanced using, users can bind the u201CSelected Item Indexu201D property to a cell and use another component to input number. Then the data will be inserted to destination accordingly.

Source Data component index

Can someone explain to me how the selected item index is used with the Source Data component?

Got my answer, thanks.

Source Data Component - when/how to use in cx 4.5?

hello,
i've read a few mesages here on this component, but i truly do not understand the basics of what this component does or when and how to use it. i'm hoping someone can give me an example of what it does and under what conditions it should be used. yes, i'm still learning cx
my other question is whether or not this component is available in the standard version of cx 4.5.
thank you
tracy
Edited by: training 2go on Feb 24, 2009 5:14 PM

Hi Divya Kumari,
If you do not want the selection screen, then remove the VIA selectino screen addition in the submit
SUBMIT RPCEDTX0
TO SAP-SPOOL WITHOUT SPOOL DYNPRO
SPOOL PARAMETERS mstr_print_parms
USING SELECTION-SET 'ZPDF'
VIA JOB lv_job_name NUMBER lv_job_nr
AND RETURN.
Regards,
Ravi
OOPS I was too late..please ignore..
Edited by: Ravi Kanth Talagana on Apr 23, 2009 1:01 PM

Code: 0xC0208452 Source: Data Flow Task ADO NET Destination [86] Description: ADO NET Destination has failed to acquire the connection {}. The connection may have been corrupted.

Hi There!
I have created one package (1) to import data from Flatfile(csv), (2)Clean It then (3)send clean rows to SQL Database.
This package was working fine before. Since I have decided to deploy this package to automate this process, I have no clue what went wrong but this doesn't run anymore. Flatfile and Database are on same windows box. We are running SQL 2008.I
have attached some screenshot to make this conversation more concise.
Your time and efforts will be appreciated!
Thanks,
DAP

Hi Niraj!
I recreated connection and I was able to remove that RED DOT next to those connections.
Still package doesnt run well :(
I have only one server. I use same server through out the process. I ran that process as job through SSMS and attached is output file(if this explains more)...
Microsoft (R) SQL Server Execute Package Utility
Version 10.0.4000.0 for 64-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 11:34:38 AM
Error: 2014-07-18 11:34:39.33
Code: 0xC0208452
Source: Data Flow Task ADO NET Destination [86]
Description: ADO NET Destination has failed to acquire the connection {2430******}. The connection may have been corrupted.
End Error
Error: 2014-07-18 11:34:39.33
Code: 0xC0047017
Source: Data Flow Task SSIS.Pipeline
Description: component "ADO NET Destination" (86) failed validation and returned error code 0xC0208452.
End Error
Error: 2014-07-18 11:34:39.33
Code: 0xC004700C
Source: Data Flow Task SSIS.Pipeline
Description: One or more component failed validation.
End Error
Error: 2014-07-18 11:34:39.33
Code: 0xC0024107
Source: Data Flow Task
Description: There were errors during task validation.
End Error
DTExec: The package execution returned DTSER_SUCCESS (0).
Started: 11:34:38 AM
Finished: 11:34:39 AM
Elapsed: 0.531 seconds
Thanks for your time and efforts!
DAP

Error when adding multiple source data stores in ODI Interface

I am trying to create an ODI Interface with couple of source tables and one target table. Say for example I am using the following data structure in my target table.
Order (Target Table)
order id
product id
customer id
address id
warehouse id
shipment id
for the above target table i need to extract data from each of the following source tables.
orderitem
product
customer
address
warehouse
shipment
Total 6 source tables i need to join however and load data for target table.
When I drag source data stores in to ODI interface mapping tab It throws the following Null Pointer Error. Due to this error I am not able to map target table with all the source tables.
Please suggest me what could be the reason for the error.
Error:
java.lang.NullPointerException
     at oracle.odi.interfaces.interactive.support.clauseimporters.ClauseImporterDefault.importClauses(ClauseImporterDefault.java:81)
     at oracle.odi.interfaces.interactive.support.actions.InterfaceActionAddSourceDataStore.performAction(InterfaceActionAddSourceDataStore.java:124)
     at oracle.odi.interfaces.interactive.support.InteractiveInterfaceHelperWithActions.performAction(InteractiveInterfaceHelperWithActions.java:845)
     at oracle.odi.interfaces.interactive.support.InteractiveInterfaceHelperWithActions.performAction(InteractiveInterfaceHelperWithActions.java:821)
     at oracle.odi.ui.OdiSdkEntityFactory.dropSourceDataStore(OdiSdkEntityFactory.java:523)
     at oracle.odi.ui.etlmodeler.diag.dragdrop.DiagramNodeDropHandler.dropObjects(DiagramNodeDropHandler.java:150)
     at oracle.diagram.framework.dragdrop.handler.DelegateChooserDropHandler.dropSelected(DelegateChooserDropHandler.java:386)
     at oracle.modeler.dnd.ModelerTCDropHandler.access$001(ModelerTCDropHandler.java:69)
     at oracle.modeler.dnd.ModelerTCDropHandler$3.run(ModelerTCDropHandler.java:288)
     at oracle.modeler.dif.GraphicAdder.addImpl(GraphicAdder.java:387)
     at oracle.modeler.dif.GraphicAdder.addAndLayoutImpl(GraphicAdder.java:372)
     at oracle.modeler.dif.GraphicAdder.addSelectAndLayout(GraphicAdder.java:348)
     at oracle.modeler.dnd.ModelerTCDropHandler.dropSelected(ModelerTCDropHandler.java:284)
     at oracle.diagram.framework.dragdrop.handler.DelegateChooserDropHandler.drop(DelegateChooserDropHandler.java:150)
     at oracle.diagram.framework.dragdrop.DefaultDropPlugin.drop(DefaultDropPlugin.java:115)
     at oracle.modeler.dnd.ModelerDropPlugin.drop(ModelerDropPlugin.java:100)
     at oracle.diagram.framework.dragdrop.DropTargetHelper.drop(DropTargetHelper.java:188)
     at oracle.diagram.framework.dragdrop.ManagerViewDragAndDropController$MyDropTargetListener.drop(ManagerViewDragAndDropController.java:802)
     at java.awt.dnd.DropTarget.drop(DropTarget.java:434)
     at sun.awt.dnd.SunDropTargetContextPeer.processDropMessage(SunDropTargetContextPeer.java:519)
     at sun.awt.dnd.SunDropTargetContextPeer$EventDispatcher.dispatchDropEvent(SunDropTargetContextPeer.java:832)
     at sun.awt.dnd.SunDropTargetContextPeer$EventDispatcher.dispatchEvent(SunDropTargetContextPeer.java:756)
     at sun.awt.dnd.SunDropTargetEvent.dispatch(SunDropTargetEvent.java:30)
     at java.awt.Component.dispatchEventImpl(Component.java:4487)
     at java.awt.Container.dispatchEventImpl(Container.java:2099)
     at java.awt.Component.dispatchEvent(Component.java:4460)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4577)
     at java.awt.LightweightDispatcher.processDropTargetEvent(Container.java:4312)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4163)
     at java.awt.Container.dispatchEventImpl(Container.java:2085)
     at java.awt.Window.dispatchEventImpl(Window.java:2478)
     at java.awt.Component.dispatchEvent(Component.java:4460)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
     at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)

Hello,
does somebody have a solution for this issue?
I am new to ODI and have the same problem. I am using ODI Designer Standalone Edition Version 11.1.1.
Maybe there is something wrong with my configuration, maybe I am doing something wrong while creating the mapping graphically. It does not help to save and re-open the mapping. Also it does not help to re-reverse engineer the objects. Also it does not seem to have something to do with the number of objects joined (some objects seem to always cause this error, with some the error starts when there are 10 or more objects on the map before they are added).
One possible workaround i have found is to do it all on the quick-edit tab by one by one creating the joins and mappings (+source or lookup joins and filter mapping). It seems to work with my configuration, but drag&drop functionality on the mapping tab would sometimes be faster, more convenient and just more human like.
Br,
Jaanus

Accordion Source Data Limit

I have built a dashboard, which is based on 50 sites, with about 40 lines per site (all up about 2000 lines), and I use an accordion menu as my selector.
Everything works great until the Accordion's Source Data range goes over 960 lines. When this happens, I cannot select a component and view it's properties. The only component properties I can see is the Canvas. If I right-click on a component, all the options are greyed-out.
I am using Xcelsius2008.

have you installed the xcelsius SP1??
find it here
Announcement - Xcelsius 2008 SP1 NOW AVAILABLE!
good luck

How adding a data source-data destination inside SSIS 2012-SSDT

Hi,
I need to see inside a SSIS 2012 project a new SSIS installed component but in the SSDT 2010 I cannot see the SSIS Data Flow Items tab for adding data source/data destination respect to the choose toolbox items pane:
It seems a SSIS bug.
Any helps to me, please?
Thanks

Hi,
In SQL 2012 you are no longer required to manually pick the tasks and components you want to use. You have to select from the new custom SSIS Toolbox to use the additional components you need.
SSIS Tasks Components Scripts Services | http://www.cozyroc.com/

Creation of DME medium FZ205 There is no source data found

We are executing payment runs using F110 and then creating data medium - a file to send to the bank.
In the variant for the program I am putting C:\ however when I have several users executing payment runs at the same time, the data medium is not creating and I am getting the error message that the source data cannot be found
Can anyone help me with this issue - should I leave the file name as blank?
Thanks
Liz

Hello,
In order to avoid FZ205 please review your selection parameters and F1 help for the print program when creating the file:
1. If you are taking the Output to file system:
If required, the file can be written to the file system. The created file can be copied to a PC using data medium exchange management. You should be looking for downloaded files here, since the data carrier is not managed within the SAP system, but is already stored in the file system by the payment medium program. The file name should be defined by the user. You should make sure that existing files with the same name have already been processed, because they will be overwritten.
Note:If a file cannot be found using the data medium exchange management the reason could be that the directory that was written to at the start of the payment medium program (in background processing, for example) cannot be read online.
You should then select a directory which can be recorded and read by several different computers. Due to the problems described above and the resulting lack of data security, we advise against writing to the file system. This method is only beneficial if the data carrier file is taken from the file system by an external program, to be transferred to the bank.
2. If you are taking Output into TemSe:
If required, the file created can be stored within the SAP System(store in the TemSe and not in the file system),thus protecting it from unauthorized external access. You can download the file into the user's file system via the DME manager. The name of the file to be created during the download can be determined when running the payment medium program: the contents of the
file name parameter are stored in the management data and defaulted when running the download.
Please check the corresponding files in the DME administration for all files and check if the output medium 'File-System' has been
chosen, that means output medium '0'. In order to use the TemSe you have to use the output medium '1'. Furthermore see if the PC-file- paths, like c:\filename.DAT, instead of application file names. The FDTA has difficulties to find these files, especially by using 2 application servers.
To avoid problems with the files SAP recommends you to use the TemSe with output medium '1', or the file system with output
medium '0'. TemSe is always a better option.
I hope this helps.
Best regards,
Suresh Jayanthi.

Report, Form, and Data Component portlets go to error page

I am able to add Report Form and Data Component portlets to my page, but when I click on the define button it takes me to my error page.
Have I missed configuring something?

hello friends,
thanks for replly,
i m using command noe after table node in main window, but i want display the data below the main window , it is diplaying new page as required but only missing data below the main window.
to be more clear i want to print all the window in first page then only go for next page , so is there any condition or parmeter in main window to go next page only agfter completion of first page.
dont worry abt points.

[APEX 3] Requested source data of the report has been modified

Hello APEX-Friends,
I have a common problem but the situation is a bit different here. Many of you might know the "invalid set of rows requested the source data of the report has been modified" problem. Often it occurs on submit. That means, you have a report, you select rows, you do things, you submit the page and everything blews up.
This is because you enter some values into fields the report depends on and so you modify your report parameters and the source data changes.
But:
In my case I have a dynamically created report that blews up before any submits occur or values change.
My query is a union of two selects. Both query different views. Those views use a date field as parameter and some compare functions.
I read the field with a V-Function i wrapped arround the apex V Function - declared as deterministic. My date compare function is also declared deterministic (I doubt this makes any differences as it might be only important for the optimizer, but as long as I don't know exactly what APEX evaluates, I go for sure).
I ensured, that the date field is set by default with the current date (and that works, because my interactive report initially displays correct data from the current date).
So everything is deterministic and the query must return same results on subsequent calls, but APEX still throws this "source data has changed" error and I am to 99.99% sure, that this cannot be true.
And now the awesome thing about this:
If I change the value of the date field, an javascript performs a submit. The page is reloaded (without resetting pagination!) and everything works fine. I can leave the page, reenter, do things - everything works well.
But if I log into the application and directly move to the corrupted report and try to use the pagination without editing fields or submitting the page the error occurs.
Do you have any Idea what's happing there? I could try to workaround this by submitting the page the first time it's entered to trigger this "mystery submit" that gets everything working. But I would like to understand this issue and have a clean solution.
Thanks in advance,
Mike aka UniversE

Okay, I found a solution, but I do not understand it - it might be a design flaw in APEX.
I mentioned the date field that is used in the query. I also mentioned that it is set with the current date by default. I did not mention how.
There are some possibilities in APEX to do so.
1. Default-Setting in the element properties
2. Static assignment if no value is in session cache
3. Computation before header
I did the first and second.
BUT:
An interactive report seems to work as follows. A query is executed to get all rows of the report. Then a second query is executed to get the rows that shall be displayed. And the order is screwed up, I think.
1. The first report query to get all rows
2. The elements are loaded and set to default values
3. The second report query to get the display rows
And that's the reason why nothing worked. Scince I added a computation before header the date field is set before the report queries are executed and everything works all fine now.
But I think it's a design flaw. Either both queries shall be executed before Regions or afterwards but not split as field values might change when elements are loaded.
Greetings,
UniversE

User View is not reflecting the source data - Transparent Partition

We have a transparent partition cubes. We recently added New fiscal year details to the cube (user view as well as source data cube). We loaded the data to the source data cube. From the user view, we tried to retrieve data, it shows up 0's. but the data is availble in the source data cube. Could anyone please provide the information what might be the issue?
Thanks!

Hi-
If u haven't add the new member in the partition area, then Madhvaneni's advice is the one u should do. Because, if u haven't add the member, the target can't read the source.
If u have already added the new member in the partition area, and still the data won't show up, sometimes it's worth to try re-save the partition, and see what's the outcome.
-Will

How to deal with such Unicode source data in BI 7.0?

I encountered error when activating DSO data. It turned out that the source data is Unicode in the HTML representation style. For example, the source character string is:
ABCDEFG& #65288;XYZ (I added a space in between & and # so that it won't be interpreted to Unicode in SDN by web browser)
After some analysis, I see it's actually the Unicode string
ABCDEFG（XYZ
Please notice the wide left parenthesis. It's the actual character from the HTML $#xxx style above. To compare, here is the Unicode parenthesis '（' and here is the ASCII one '(' . You see they are different.
My question is: as I have trouble loading the &#... string, I think I should translate the string to actual Unicode character (like '（' in this case). But how can I achieve this?
Thanks!
Message was edited by:
Tom Jerry

I found this is called "Numeric character reference", or NCR, in HTML term. So the question is how to convert string in NCR fashion back to Unicode. Thanks.

There is no source data for this data record, Message FZ205

Hi Experts,
I am facing a problem with the DME File download. This problem happened all of sudden in our production system since last month and it was never before. Our system landscape has also not been changed but as per our basis consultant he has added two-three more new application server to the Production client. Even we do not have this problem in our testing clients.
Please note that we have been using the output medium '1' from the day one and thus the system has been generating the DME in 'File System' which we download on the desktop and upload the same to the bank online. After running the payment run when we trying to download the DME File, the system gives the error "There is no source data for this data record, Message FZ205".
I tried to fix this issue through many ways but not able to. So can you please let me know the reason of this error and solution to fix this.
With best regards,
BABA

Hi Shailesh,
Please share how you solved this problem.
Many Thanks,
Lakshmi

Error during data load due to special characters in source data

Hi Experts,
We are trying to load Billing data into the BW using the billing item datasource. It seems that there are some special characters in the source data. When the record with these characters is encountered, the request turns red and the package is not loaded even into the PSA. The error we get in the monitor is something like
'RECORD 5028: Contents from field **** cannot be converted into type CURR',
where the field **** is a key figure of type currency. We managed to identify the said record in RSA3 on the source system and found that one of the fields contains some invalid (special) characters that show up as squares in RSA3. The data in the rest of the fields, including the fields mentioned in the error looks correct.
Our source system is a non-unicode system wheras the BW system is unicode enabled. I figure that the data in the rest of the fields are getting misaligned due to the presence of the invalid characters in the above field. This was confirmed when we unassigned the field with the special characters from the transfer rules and removed the source field from the transfer structure. After doing this the data was loaded successfully and the request turned green.
Can anyone suggest a way to either filter out such invalid characters from the source data or make some settings in the BW systems such that the special characters are no longer invalid in the BW system? We cannot write code in the transfer rules because the data package does not even come into the PSA. Is there any other method to solve this problem?
Regards,
Ted

Hi Thad,
I was wondering, if system is unicode or non unicode that should not matter the amount and currency field . As currencies are defined by SAP and it is in pure English at least a currency code part of 3 Chars.
Could this because of some incosistency of data ??
I would like to know for Which currency had some special characters it it in that particular record ??
Hope that helps.
Regards
Mr Kapadia

Source Data Component

Similar Messages

Maybe you are looking for