Source Files Vs. Generated Files

I inadvertenly copied some files to my source directory that
were wrong. Since I knew I had the correct files in the generated
copy, I copied these files back to my source files. Now my
formatting is not right. Is there an easy way to fix this?
Helpa mea!

It's not just the formatting. The text refers to graphics and
you have to see them for it to make any sense.
The link I have given is to the same page without the word
wizard in the link. Beyond that you will need to get your IT guys
to resolve this or view from elsewhere and print it.
Sorry but it will not be of any use to you without the
graphics.

Similar Messages

  • Generate xml source file for Oracle Order Capture Print Quote

    Hi,
    I am new to xml and need to work on creating templates for Print Quote.
    I am trying to generate the xml source file for which I enabled the report in system administrator and set the output to XML and assigned to Quoting Reports responsiblity. I then assigned XML Report Publisher to the same responsiblity.
    I ran the report (Print Quote) and then I am trying to run the XML Report Publisher but I cannot get the request id in the list of values.
    I am able to generate xml source file for other reports like Printed Purchase Order etc.,
    The view output for the (Print Quote) report is as follows:
    <?xml version="1.0" ?>
    - <!-- Generated by Oracle Reports version 6.0.8.26.0
    -->
    <ASOPQTER />
    How do I get the xml source file? Or are there seeded templates that I can use to create more templates? Any help would be appreciated. Thanks Ravi

    Hi, I am in the same position - did this issue ever ger resolved by anyone. I have done a few XMLP reports successfully now using the Word add-in, but customising the Quote output differs from other standard reports.
    If you look at the data definition for Quote it is a 'dummy' definition and has no XML file attached. Does anyone know how I can get the XML format for the report output?
    Also the template uses XSL-FO ?!?!?! rather than RTF - not sure how to work with this, the Oracle docs are not very helpful in this regard either.
    Has anyone successfully managed to customise the Quote print report? Many thanks,
    Roger

  • The command oracg fails to generate Java source files

    I tried to use the command 'oracg -schema Openshipments.xdr' to generate Java source files from
    XML schema file Openshipments.xdr . Although the schema file is valid, the command oracg fails with following error messages :
    file:/D:/romel/project/UPS/doc/Openshipments.xdr<Line 6, Column 47>:
    XSD-2026: (Error) Invalid attribute 'name' in element 'element'
    file:/D:/romel/project/UPS/doc/Openshipments.xdr<Line 6, Column 47>:
    XSD-2030: (Error) Element 'schema' has invalid namespace:
    'urn:schemas-microsoft-com:xml-data'
    file:/D:/romel/project/UPS/doc/Openshipments.xdr<Line 6, Column 47>:
    XSD-2027: (Error) Invalid element 'ElementType' in 'schema'
    file:/D:/romel/project/UPS/doc/Openshipments.xdr<Line 6, Column 47>:
    XSD-2027: (Error) Invalid element 'ElementType' in
    'schema'file:/D:/romel/project/UPS/doc/Openshipments.xdr<Line 6, Column
    47>: XSD-2027: (Error) Invalid element 'ElementType' in 'schema'
    file:/D:/romel/project/UPS/doc/Openshipments.xdr<Line 6, Column 47>:
    XSD-2027: (Error) Invalid element 'ElementType' in 'schema'
    file:/D:/romel/project/UPS/doc/Openshipments.xdr<Line 6, Column 47>:
    XSD-2027: (Error) Invalid element 'ElementType' in 'schema'
    file:/D:/romel/project/UPS/doc/Openshipments.xdr<Line 6, Column 47>:
    XSD-2027: (Error) Invalid element 'ElementType' in
    'schema'file:/D:/romel/project/UPS/doc/Openshipments.xdr<Line 6, Column
    47>: XSD-2027: (Error) Invalid element 'ElementType' in 'schema'
    file:/D:/romel/project/UPS/doc/Openshipments.xdr<Line 6, Column 47>:
    XSD-2027: (Error) Invalid element 'ElementType' in 'schema'
    ...... the above line is repeated many times
    Error: Schema Class Generator failed to generate classes.
    oracle.xml.parser.schema.XSDException: Invalid attribute 'name' in
    element 'element'

    Your schema is not a valid XML Schema. Please check up with the syntax.
    Thanks.

  • Generating the JSP from the Servlet source file

    Hi,
    Does anyone out there know if there is any utility/class/program which will generate a JSP from the Servlet Source file (.java file) or indeed from the compiled Servlet file (.class file)
    If its possible to decompile a .class file into a .java file, surely it must be possible to convert the .java souce file into the .jsp file that created it.
    any comments would be appreciated
    Richard

    I am the author of the original JSP!
    But I want to run a script on the generated Servlet source file,
    changing its contents, and then generate the JSP that would have created the new Servlet source file.
    but I need to know if theres anything that will reverse engineer a Servlet source into the generating JSP.
    its a kind of of Jeopardy type thing!

  • Where the default location of generated source files?

    Hello!
    In my processor I create several source files and check it's names for existance before
    private String genClassName( final String packageName, final String key, final String suffix )
            final StringBuilder suggest = new StringBuilder( packageName ).append( key ).append( suffix );
            final Elements elementsUtil = processingEnv.getElementUtils();
            int i = 0;
            while( elementsUtil.getTypeElement( suggest ) != null )
                suggest.append( i++ );
            return suggest.substring( packageName.length() );
        }If I not define -s option for javac at first time compile and then set it to some location, then some generated before files are visible for this method and numbers added.
    So, the question: where to find a default "shadow" source tree to clean up it before next compilation with changed -s option?
    Sorry for my english and thanks for answers
    Edited by: Maxoid2 on Jun 3, 2008 10:34 PM

    The directory to clean up is where the -s option pointed to last time.
    The simplest way to do this is to always use the -s option and don't change it. Using the default value for -s option (which is the same as -d) tends to lead to problems. I always specify -s option, and make it different to -d option and -sourcepath.
    If you do this you don't even have to clean it up, javac only looks in there for files that it placed there. Files from previous builds get overwritten. Files from previous builds that are not overwritten are ignored.
    with a separate -s directory, it just works.
    Bruce

  • Documentation generator directly from C source files

    Hello,
    Is there any tool to generate HTML documentation directly from C sources files using Documentation Tags like "/// HIFN "?
    I know we can generate documentation with function panels documentation generator but that's not what I'm looking for. I'm looking for something like doxygen or javadoc with NI documentation tags support. 
    Regards,
    Aurélien.

    Hello AReeves!
    LabWindows/CVI features a documentation generation tool able to output HTML and XML format documentation from your C source files.
    You can use the source code documentation tags (e.g. HIFN, HIPAR, etc) to document your functions in the source code, similar to doxygen.
    The option is located in Build » Target Settings » Generate source code documentation. There you can select your output format.
    Here is a useful link related to generating documentation from source files using CVI:
    http://zone.ni.com/reference/en-XX/help/370051T-01/cvi/usermanual/tagsforsourcecode/
    Regards,
    - Johannes

  • Steps to ensure all Adobe Copyright requirements are met with Flash Builder generated source files?

    I'm currently doing copyright scanning on our product to look for open source copyright banners, and to make sure we are correctly following all copyright requirements for our licensed software.
    That said, our entire team uses licensed Flash Builder 4.7's to build our client in Flex.   Several of the source files generated by the Flash Builder (especially skins) have Adobe Copyright banners on them.
    <!--
    ADOBE SYSTEMS INCORPORATED
    Copyright 2008 Adobe Systems Incorporated
    All Rights Reserved.
    NOTICE: Adobe permits you to use, modify, and distribute this file
    in accordance with the terms of the license agreement accompanying it.
    -->
    I can't find any assistance or online help that outlines how I fulfill the "accompanying" portion of that clause.  Is there something I can add to our arbitration file or documentation to satisfy that?
    Thanks,
    Joe Firebaugh

    Read your posting too fast, sorry.
    On the Mac, select a text file (.TXT file) in the Finder. Choose File > Get Info. In the Open With section, select the editor you want to use for TEXT files. Click Change All.
    Sometimes, you have to do this with more than one TXT file, but it should work.

  • Generating debug symbols from a source file in assembly

    Hi,
    I have a file written in the SPARC assembly language, which I can successfully assemble using the "as" command and produce an object file. However, the object file that it being produced does not have any debugging information in it. So when I link that object file into my program, I cannot debug that assembly code. (I don't need to be able to do full-fledged debugging, I would just like to know which lines in that assembly language file are being executed).
    My question is: how can I get the assembler to produce the object file with enough debugging information to do this. A MIPS assembler that I used before accepts a combination of options "ahls", which allows you to know the lines that are being executed in the assembly source file when you debug the program. The SPARC assembler does not appear to have such options.
    Do I need to extend the source file itself with additional information manually? Is there a manual that tells you how to do this?
    Any help would be appreciated.
    Thanks!

    Are you using dbx to debug your assembly code? dbx allows you to step through and view assembly instructions with the stepi, stopi, nexti, and listi commands.
    (dbx) listi
        2         print *, "Hello World"
    0x00011390: MAIN       :        save    %sp, -0x78, %sp
    0x00011394: MAIN+0x0004:        mov     0x8, %l0
    0x00011398: MAIN+0x0008:        st      %l0, [%fp - 0x18]
    0x0001139c: MAIN+0x000c:        sethi   %hi(0x21400), %l0
    0x000113a0: MAIN+0x0010:        or      %l0, 0x270, %l0
    0x000113a4: MAIN+0x0014:        st      %l0, [%fp - 0x14]
    0x000113a8: MAIN+0x0018:        add     %fp, -0x18, %l0
    0x000113ac: MAIN+0x001c:        call    __f90_sslw [PLT]
    0x000113b0: MAIN+0x0020:        mov     %l0, %o0
    0x000113b4: MAIN+0x0024:        add     %fp, -0x18, %l0
    0x000113b8: MAIN+0x0028:        sethi   %hi(0x11400), %l1
    0x000113bc: MAIN+0x002c:        or      %l1, 0x140, %l1
    0x000113c0: MAIN+0x0030:        mov     0xb, %l2
    0x000113c4: MAIN+0x0034:        mov     %l0, %o0
    0x000113c8: MAIN+0x0038:        mov     %l1, %o1
    0x000113cc: MAIN+0x003c:        call    __f90_slw_ch [PLT]
    0x000113d0: MAIN+0x0040:        mov     %l2, %o2
    0x000113d4: MAIN+0x0044:        add     %fp, -0x18, %l0
    0x000113d8: MAIN+0x0048:        call    __f90_eslw [PLT]
    0x000113dc: MAIN+0x004c:        mov     %l0, %o0
    0x000113e0: MAIN+0x0050:        ret    
    0x000113e4: MAIN+0x0054:        restore
        3         end(dbx) stopi at MAIN+0x001c
    (2) stopi at &MAIN+0x1c
    (dbx) run
    Running: main
    (process id 28657)
    stopped in MAIN at 0x113ac
    0x0001113ac: MAIN+0x001c: call __f90_sslw [PLT]
    (dbx) examine $fp
    0xffbfee48: 0x00000001
    (dbx) examine $l0
    0xffbfee30: 0x00000008
    Is this the sort of thing for which you are looking? If not, could you describe the specific capabilities you need?

  • UPDATE : Toshiba Recovery Wizard 'cannot read from source file or disk' error (satellite L500)

    UPDATE 2: Phoned Toshiba tech support again, guided by techie to begin the recovery again. Just before phoning I was able to go into recovery options and view the drive setup and all the files that couldn't be read are on the CD so I've no idea why the error kept occuring, and neither did the techie. Fingers crossed it works this time but I'm not overly hopefully given that we've just done exactly the same as I did before.  UPDATE 1: I got into the BIOS and reset everything back to defaults and yay, my toshiba recovery wizard now starts! :-D  On the down side, when trying to do a factory default software / out of the box recovery I continually get error messages with regards to copying the files, for example 
    cannot read from source file or disk
    7z.dll
    Type application extension
    size 585kb
    date modified 7/14/2009 10.26pm
    other read / copy errors include PREINST6.SWM, BOOT_32, BOOTPRIORITY, CHECKMAXPTSIZE, CHGBOOT, CPU, CPUCHECK, CREATEPARTITION, CTRLDRVINFO, DISKWIPE, DMI, DPINST32, EBLIB.DLL, ERRORDIALOG, EW3BOOTSEQ, FWLINK, FWLINK.SYS, GETHDDINFO, GETKEYSTATE, IMAGEX, INFILED, INITRECAREA, KRAIADAPI.DLL ..... at which point I decided to 'skip all' :-/
    Any explanations as to what's going on and how I might be able to fix it would be very much appreciated! :-)  Thank you!
    I have a two and half year old satellite L500 with an Intel i-3 and 4 gigs of RAM, on which I was running Windows 7.
    Admittedly it’s had rather a hard life (I ran some very demanding CAD / graphics software on it) but it had always performed well until just recently, when after suffering several BSOD (which had never happened before), the hard drive failed.
    I partitioned and formatted a brand new hard drive (which is perfectly fine and functions normally when hooked up to another laptop with a SATA to USB cable) and obtained system recovery discs from Toshiba.  Unfortunately, when I try and run the first disc, windows starts to load files but then generates an error screen with the message Error F3-F100-0003 and a request to turn the computer off.  
    When I use the windows Memory Diagnostic to get into the Windows Boot Manager Screen I get the following;
    Windows failed to start.  A recent hardware / software change might be the case.
    To fix the problem
    Insert your windows installation disc and restart your computer
    Choose your language settings and click ‘next’
    Click ‘repair your computer’
    File: \boot\memtest.exe
    Status: 0xc000000f
    Info: the selected entry could not be loaded because the application is missing or corrupt.
    I can also use F8 on startup to get into the advanced boot options but selecting any of them simply results in the F3-F100-0003 error message.  I’ve run a memory test using the UBCD, which tells me the memory is fine, and tried another hard drive (which also works perfectly well in another laptop) but no joy.  On phoning Toshiba support the techie said my hard drive had failed, but as I say, both hard drives are perfectly fine / usable when hooked up to another laptop.  I’m now completely stuck as to what the problem is and how I might resolve it – any advice / suggestions would be most gratefully received! Thank you in advance :-)

    Satellite L655-S5096
    Downloads here.
    the second disc gives me the the "cannot read from source file or disk PREINST8.SWM"
    My best guess is that the disc is not readable. Try copying it to another. Sometimes that works.
    Otherwise, order new discs from Toshiba.
    -Jerry

  • PDF outputs continually crash after editing an html source file

    I have English and multiple localized versions of a RoboHelp webhelp project. I have created several PDF outputs for the localized versions. I can generate the PDFs fine when I don't touch any of the html source files.
    However, I had to make a change to one of the html source files to remove a <dl> from the source file. After making the change to the source file in an outside text editor (Notepad ++), I went back to RoboHelp to generate the PDF, and the PDF output crashed.
    The reason I was using an outside text editor is that when I tried to edit the <dl> HTML tags in RH, its HTML editor deleted all text within the tags being edited.  There was no undo at this point.  In anotehr attempt to use the RH Design editor, RH didn’t delete the <dd> or <dt> tags when those tag styles were changed to <h4> and <p>, respectively. RH inserted the new html wrapper inside the existing ones, instead of replacing it.
    Also, during the PDF generation process, a Visual Basic error message will appear dozens of times stating that the application was interrupted.  I must press OK to continue for each error message.
    What gives with the PDF generation failing like this?

    I hate to say it but it sounds like something you are doing in the external editor is not liked by RoboHelp.
    It could just be the way that text editor codes the file. I use EditPad Pro and that has various options for text encoding. My guess is your editor is not set to what RoboHelp expects.
    Aftr that what I would do here is create a new one topic project and recreate the problem, with the minimum of text. It may help you spot the code RoboHelp does not like.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • Any Tutorial / Sample to create Single PDF from multiple source files using PDF assembler in a watched folder process.

    Any Tutorial / Sample to create Single PDF from multiple source files using PDF assembler in a watched folder process. I have a client application which will prepare number of source files and some meta data information (in .XML) which will be used in header/footer. Is it possible to put a run time generated DDX file in the watch folder and use it in Process. If possible how can I pass the file names in the DDX. Any sample Process will be very helpful.

    If possible, make use of Assembler API in your client application instead of doing this using watched folder. Here are the Assembler samples :  LiveCycle ES2.5 * Programming with LiveCycle ES2.5
    Watched folder can accept zip files (sample : Configuring a watched folder to handle multiple input files and write results to a single folder | Adobe LiveCycle Blog ). You can also use execute script to create the DDX at runtime : LiveCycle ES2 * Application Development Using LiveCycle Workbench ES2
    Thanks
    Wasil

  • How can we handle graphics in DITA source files in order to display them correctly both in PDF and H

    We are using FM9 to publish PDF and HTML output from DITA source files and we cannot find a way to display images correctly. By adjusting the appropriate DPI, the image gets correctly displayed in HTML but not in PDF where it appears cropped according to the the text frames of the source file in FM9, like this:
    We have tried to enlarge the text frame in the source file but for some reasons FrameMaker doesn't take these changes into account.
    By modifying the attribute of the element <fig> (expanse = page), it was possible to improve a bit the rendering in the PDF but not completely.
    Our graphics are in JPG format.
    Any help on this is highly appreciated.
    Thank you.

    Hi Al@s...
    DITA doesn't provide a way to store additional information about anchored frame properties (since there is no "frame" element, just image), that's why FrameMaker doesn't allow you to set the frame size to something other than the image dimensions.
    The "standard" DITA way to reference an image with two different DPIs is to insert multiple fig/image elements and conditionalize (via attributes and ditaval) each image so it shows up in the proper output. This can be a bit tedious to insert two images for each instance, but that's the typical way to handle it (unless you've got a CMS that switches the images for different output types).
    If you use DITA-FMx, it provides a "fmdpi" feature which allows you to tag an image with the DPI you want to use in the FrameMaker-generated output, but the DITA coding sets no DPI (or height/width), so it uses the default image size for your HTML output.
        http://leximation.com/dita-fmx/
    Cheers,
    ...scott
    Scott Prentice
    Leximation, Inc.
    www.leximation.com

  • MiniTOC does not appear in translated source file

    RoboHelp 8.0.2
    WebHelp Output
    I added a miniTOC placeholder to three of my topics. This is the first time I am using the placeholder.
    The English WebHelp project was sent for translation to French Canadian. I received the source project and noticed that the placeholder does not appear in the source file. Therefore, when I compile the output the miniTOC does not appear.
    The translation company is using the latest version of RoboHelp, but I am not sure what tool they use to translate.
    I have no clue how to resolve this issue. Sample code and screens are listed below.
    Donna
    English Source
    <h1><a name="Top"></a>Working with Web Ordering</h1>
    <p&gt;This topic explains how to generate and maintain NAPA and Factory orders.
    (Special orders and Non NAPA orders will be available in a future release).
    You perform these tasks on the <span style="font-weight: bold;">Order
    Maintenance</span> page. This topic assumes you have launched <span style="font-weight: bold;">Order
    Maintenance</span> from the TAMS II Landing Page or selected <span style="font-weight: bold;">Inventory
    &gt; Web Ordering</span&gt; from TAMS II BackOffice.</p&gt;
    <p>See: <span style="font-weight: bold;">TAMS II Web Interface Overview
    </span&gt;<span&gt;topic</span&gt; for instructions on common functionality such
    as sorting data.</p&gt;
    <?rh-placeholder type="minitoc" ph-style="font-family:Arial;font-size:10pt;font-weight: bold;font-style: normal;text-decoration: none;"
    list-type="ul" list-style="circle" caption="Topic Contents" caption-style="font-family:Arial;font-size:11pt;font-weight: bold;font-style: normal;text-decoration: underline;"
    margin=";;0px;1px" min-heading-level="h2" max-heading-level="h2" flags="7" ?>
    <p&gt;&#160;</p&gt;
    <h2>Adding a New Order</h2>
    <p&gt;Follow these instructions to create a new purchase order:</p&gt;
    French Source
    h1&gt;<a name="Top"&gt;</a&gt;Utiliser le module de commande en ligne</h1&gt;
    <p&gt;Cette rubrique explique comment créer et gérer des commandes NAPA et
    d'envoi direct. (Les commandes spéciales seront disponibles dans une version
    future.) Ces tâches sont effectuées à partir de l'écran <span style="font-weight: bold;"&gt;Gestion
    des commandes</span&gt;. Cette rubrique suppose que l'utilisateur est connecté
    et que la <span style="font-weight: bold;"&gt;Gestion des commandes</span&gt;
    a été lancée à partir de la page de renvoi de TAMS&#160;II. </p&gt;
    <p&gt;Voir&#160;: La rubrique <span style="font-weight: bold;"&gt;Survol de l'interface
    Web de TAMS&#160;II</span&gt; pour des instructions sur les fonctions courantes
    comme le tri des données.</p&gt;
    <h2&gt;Ajouter une nouvelle commande</h2&gt;
    <p&gt;Suivre les instructions ci-dessous pour créer un nouveau bon de commande&#160;:</p&gt;

    The Shuffle can only be linked to one computer at a time if you want to use the Shuffle on a different computer you must allow Itunes to restore the Shuffle and than you can use it. Sorry there's really no good way around this besides going third party.

  • [SOLVED] [makepkg] attempts to process source files multiple times

    OK, so I decided I was going to update the PKGBUILD for linux-lts-tresor to the new format with separate sources for different architectures and PGP keys, having successfully done it for the nvidia packages I maintain and I get the following issue when I run mkaurball on the linux-lts-tresor PKGBUILD:
    claire ~/Builds/linux-lts-tresor % mkaurball
    ==> Making package: linux-lts-tresor 3.14.28-1 (Fri 9 Jan 10:51:06 GMT 2015)
    ==> Retrieving sources...
    -> Found linux-3.14.tar.xz
    -> Found linux-3.14.tar.sign
    -> Found patch-3.14.28.xz
    -> Found patch-3.14.28.sign
    -> Found config
    -> Found config.x86_64
    -> Found linux-lts-tresor.preset
    -> Found linux-lts-tresor.install
    -> Found change-default-console-loglevel.patch
    -> Found 0001-Bluetooth-allocate-static-minor-for-vhci.patch
    -> Found 0002-module-allow-multiple-calls-to-MODULE_DEVICE_TABLE-p.patch
    -> Found 0003-module-remove-MODULE_GENERIC_TABLE.patch
    -> Found 0006-genksyms-fix-typeof-handling.patch
    -> Found tresor_sysfs.c
    -> Found tresor-patch-3.6.2_i686
    -> Found tresor-patch-3.6.2_i686.patch
    -> Found tresor-patch-3.6.2_i686.patch.sig
    -> Found patch-3.14.28.sign
    -> Found config
    -> Found config.x86_64
    -> Found linux-lts-tresor.preset
    -> Found linux-lts-tresor.install
    -> Found change-default-console-loglevel.patch
    -> Found 0001-Bluetooth-allocate-static-minor-for-vhci.patch
    -> Found 0002-module-allow-multiple-calls-to-MODULE_DEVICE_TABLE-p.patch
    -> Found 0003-module-remove-MODULE_GENERIC_TABLE.patch
    -> Found 0006-genksyms-fix-typeof-handling.patch
    -> Found tresor_sysfs.c
    -> Found tresor-patch-3.8.2_aesni
    -> Found tresor-patch-3.8.2_aesni.patch
    -> Found tresor-patch-3.8.2_aesni.patch.sig
    -> Found patch-3.14.28.sign
    -> Found config
    -> Found config.x86_64
    -> Found linux-lts-tresor.preset
    -> Found linux-lts-tresor.install
    -> Found change-default-console-loglevel.patch
    -> Found 0001-Bluetooth-allocate-static-minor-for-vhci.patch
    -> Found 0002-module-allow-multiple-calls-to-MODULE_DEVICE_TABLE-p.patch
    -> Found 0003-module-remove-MODULE_GENERIC_TABLE.patch
    -> Found 0006-genksyms-fix-typeof-handling.patch
    -> Found tresor_sysfs.c
    ==> Validating source files with sha256sums...
    linux-3.14.tar.xz ... Passed
    linux-3.14.tar.sign ... Skipped
    patch-3.14.28.xz ... Passed
    patch-3.14.28.sign ... Skipped
    config ... Passed
    config.x86_64 ... Passed
    linux-lts-tresor.preset ... Passed
    linux-lts-tresor.install ... Passed
    change-default-console-loglevel.patch ... Passed
    0001-Bluetooth-allocate-static-minor-for-vhci.patch ... Passed
    0002-module-allow-multiple-calls-to-MODULE_DEVICE_TABLE-p.patch ... Passed
    0003-module-remove-MODULE_GENERIC_TABLE.patch ... Passed
    0006-genksyms-fix-typeof-handling.patch ... Passed
    tresor_sysfs.c ... Passed
    ==> Validating source files with sha256sums...
    tresor-patch-3.6.2_i686 ... Passed
    tresor-patch-3.6.2_i686.patch ... Passed
    tresor-patch-3.6.2_i686.patch.sig ... Skipped
    ==> Validating source files with sha256sums...
    tresor-patch-3.8.2_aesni ... Passed
    tresor-patch-3.8.2_aesni.patch ... Passed
    tresor-patch-3.8.2_aesni.patch.sig ... Skipped
    ==> Verifying source file signatures with gpg...
    linux-3.14.tar ... Passed
    patch-3.14.28 ... Passed
    tresor-patch-3.6.2_i686.patch ... Passed
    patch-3.14.28 ... Passed
    tresor-patch-3.8.2_aesni.patch ... Passed
    patch-3.14.28 ... Passed
    ==> Entering fakeroot environment...
    ==> Creating source package...
    -> Adding PKGBUILD...
    -> Generating .SRCINFO file...
    -> Adding config...
    -> Adding config.x86_64...
    -> Adding linux-lts-tresor.preset...
    -> Adding linux-lts-tresor.install...
    -> Adding change-default-console-loglevel.patch...
    -> Adding 0001-Bluetooth-allocate-static-minor-for-vhci.patch...
    -> Adding 0002-module-allow-multiple-calls-to-MODULE_DEVICE_TABLE-p.patch...
    -> Adding 0003-module-remove-MODULE_GENERIC_TABLE.patch...
    -> Adding 0006-genksyms-fix-typeof-handling.patch...
    -> Adding tresor-patch-3.6.2_i686.patch...
    -> Adding tresor-patch-3.6.2_i686.patch.sig...
    -> Adding config...
    ln: failed to create symbolic link ‘/home/claire/Builds/linux-lts-tresor/srclinks.Qb2SC9gzL/linux-lts-tresor/config’: File exists
    -> Adding config.x86_64...
    ln: failed to create symbolic link ‘/home/claire/Builds/linux-lts-tresor/srclinks.Qb2SC9gzL/linux-lts-tresor/config.x86_64’: File exists
    -> Adding linux-lts-tresor.preset...
    ln: failed to create symbolic link ‘/home/claire/Builds/linux-lts-tresor/srclinks.Qb2SC9gzL/linux-lts-tresor/linux-lts-tresor.preset’: File exists
    -> Adding linux-lts-tresor.install...
    ln: failed to create symbolic link ‘/home/claire/Builds/linux-lts-tresor/srclinks.Qb2SC9gzL/linux-lts-tresor/linux-lts-tresor.install’: File exists
    -> Adding change-default-console-loglevel.patch...
    ln: failed to create symbolic link ‘/home/claire/Builds/linux-lts-tresor/srclinks.Qb2SC9gzL/linux-lts-tresor/change-default-console-loglevel.patch’: File exists
    -> Adding 0001-Bluetooth-allocate-static-minor-for-vhci.patch...
    ln: failed to create symbolic link ‘/home/claire/Builds/linux-lts-tresor/srclinks.Qb2SC9gzL/linux-lts-tresor/0001-Bluetooth-allocate-static-minor-for-vhci.patch’: File exists
    -> Adding 0002-module-allow-multiple-calls-to-MODULE_DEVICE_TABLE-p.patch...
    ln: failed to create symbolic link ‘/home/claire/Builds/linux-lts-tresor/srclinks.Qb2SC9gzL/linux-lts-tresor/0002-module-allow-multiple-calls-to-MODULE_DEVICE_TABLE-p.patch’: File exists
    -> Adding 0003-module-remove-MODULE_GENERIC_TABLE.patch...
    ln: failed to create symbolic link ‘/home/claire/Builds/linux-lts-tresor/srclinks.Qb2SC9gzL/linux-lts-tresor/0003-module-remove-MODULE_GENERIC_TABLE.patch’: File exists
    -> Adding 0006-genksyms-fix-typeof-handling.patch...
    ln: failed to create symbolic link ‘/home/claire/Builds/linux-lts-tresor/srclinks.Qb2SC9gzL/linux-lts-tresor/0006-genksyms-fix-typeof-handling.patch’: File exists
    -> Adding tresor-patch-3.8.2_aesni.patch...
    -> Adding tresor-patch-3.8.2_aesni.patch.sig...
    -> Adding config...
    ln: failed to create symbolic link ‘/home/claire/Builds/linux-lts-tresor/srclinks.Qb2SC9gzL/linux-lts-tresor/config’: File exists
    -> Adding config.x86_64...
    ln: failed to create symbolic link ‘/home/claire/Builds/linux-lts-tresor/srclinks.Qb2SC9gzL/linux-lts-tresor/config.x86_64’: File exists
    -> Adding linux-lts-tresor.preset...
    ln: failed to create symbolic link ‘/home/claire/Builds/linux-lts-tresor/srclinks.Qb2SC9gzL/linux-lts-tresor/linux-lts-tresor.preset’: File exists
    -> Adding linux-lts-tresor.install...
    ln: failed to create symbolic link ‘/home/claire/Builds/linux-lts-tresor/srclinks.Qb2SC9gzL/linux-lts-tresor/linux-lts-tresor.install’: File exists
    -> Adding change-default-console-loglevel.patch...
    ln: failed to create symbolic link ‘/home/claire/Builds/linux-lts-tresor/srclinks.Qb2SC9gzL/linux-lts-tresor/change-default-console-loglevel.patch’: File exists
    -> Adding 0001-Bluetooth-allocate-static-minor-for-vhci.patch...
    ln: failed to create symbolic link ‘/home/claire/Builds/linux-lts-tresor/srclinks.Qb2SC9gzL/linux-lts-tresor/0001-Bluetooth-allocate-static-minor-for-vhci.patch’: File exists
    -> Adding 0002-module-allow-multiple-calls-to-MODULE_DEVICE_TABLE-p.patch...
    ln: failed to create symbolic link ‘/home/claire/Builds/linux-lts-tresor/srclinks.Qb2SC9gzL/linux-lts-tresor/0002-module-allow-multiple-calls-to-MODULE_DEVICE_TABLE-p.patch’: File exists
    -> Adding 0003-module-remove-MODULE_GENERIC_TABLE.patch...
    ln: failed to create symbolic link ‘/home/claire/Builds/linux-lts-tresor/srclinks.Qb2SC9gzL/linux-lts-tresor/0003-module-remove-MODULE_GENERIC_TABLE.patch’: File exists
    -> Adding 0006-genksyms-fix-typeof-handling.patch...
    ln: failed to create symbolic link ‘/home/claire/Builds/linux-lts-tresor/srclinks.Qb2SC9gzL/linux-lts-tresor/0006-genksyms-fix-typeof-handling.patch’: File exists
    -> Compressing source package...
    ==> Leaving fakeroot environment.
    ==> Source package created: linux-lts-tresor (Fri 9 Jan 10:51:25 GMT 2015)
    Here is the PKGBUILD:
    # Maintainers:
    # Claire Farron <[email protected]>
    # Andes Ho <[email protected]> (Secondary Package Tester)
    # Former Maintainer(s)
    # Ido Rosen <[email protected]>
    # xerc <aur[at]xerc.de>
    # Contributor: tresor-patch-3.6.2_i686.patch and consolidation of patches
    # Seth Dickson <[email protected]>
    # Contributor(s) of the linux PKGBUILD
    # Tobias Powalowski <[email protected]>
    # Thomas Baechler <[email protected]>
    ### Do not edit below this line unless you know what you're doing
    pkgbase=linux-lts-tresor # Build stock -lts kernel with TRESOR patches
    #pkgbase=linux-custom # Build kernel with a different name
    _srcname=linux-3.14
    pkgname=linux-lts-tresor # placeholder
    pkgdesc="Linux longterm stable kernel and modules with integrated TRESOR"
    pkgver=3.14.28
    pkgrel=1
    arch=('i686' 'x86_64')
    url="http://www1.informatik.uni-erlangen.de/tresor"
    license=('GPL2')
    makedepends=('xmlto' 'docbook-xsl' 'kmod' 'inetutils' 'bc')
    options=('!strip')
    source=("https://www.kernel.org/pub/linux/kernel/v3.x/${_srcname}.tar.xz"
    "https://www.kernel.org/pub/linux/kernel/v3.x/${_srcname}.tar.sign"
    "https://www.kernel.org/pub/linux/kernel/v3.x/patch-${pkgver}.xz"
    "https://www.kernel.org/pub/linux/kernel/v3.x/patch-${pkgver}.sign"
    # the main kernel config files
    'config' 'config.x86_64'
    # standard config files for mkinitcpio ramdisk
    "${pkgbase}.preset"
    "${pkgbase}.install"
    'change-default-console-loglevel.patch'
    '0001-Bluetooth-allocate-static-minor-for-vhci.patch'
    '0002-module-allow-multiple-calls-to-MODULE_DEVICE_TABLE-p.patch'
    '0003-module-remove-MODULE_GENERIC_TABLE.patch'
    '0006-genksyms-fix-typeof-handling.patch'
    'http://www1.informatik.uni-erlangen.de/filepool/projects/tresor/tresor_sysfs.c')
    source_i686+=("http://www1.informatik.uni-erlangen.de/filepool/projects/tresor/tresor-patch-3.6.2_i686"
    'tresor-patch-3.6.2_i686.patch'
    'tresor-patch-3.6.2_i686.patch.sig')
    source_x86_64+=("http://www1.informatik.uni-erlangen.de/filepool/projects/tresor/tresor-patch-3.8.2_aesni"
    'tresor-patch-3.8.2_aesni.patch'
    'tresor-patch-3.8.2_aesni.patch.sig')
    sha256sums=('61558aa490855f42b6340d1a1596be47454909629327c49a5e4e10268065dffa'
    'SKIP'
    'e3c79a30ac959c84c329be5461da88a5c79c6463da30d376c27bb103aee79b51'
    'SKIP'
    '6291d78969d8db94525d9614fa15c6a5db97b070af50d84f68d32ecd5f40fd69'
    '145a66ef4f702ed516a57d846dd00b5acac7b5cc1eff86d1e7ee6bd5a66040b2'
    '003b45593f1b5cdb81ea2da6ab67deef04402eb15aae231921ff55f65948fbdd'
    'edb6d4ed9ca2af1ffc15ddbf195152c219e77bd12da3ea176c5c24afc0a779d4'
    'faced4eb4c47c4eb1a9ee8a5bf8a7c4b49d6b4d78efbe426e410730e6267d182'
    '6d72e14552df59e6310f16c176806c408355951724cd5b48a47bf01591b8be02'
    '52dec83a8805a8642d74d764494acda863e0aa23e3d249e80d4b457e20a3fd29'
    '65d58f63215ee3c5f9c4fc6bce36fc5311a6c7dbdbe1ad29de40647b47ff9c0d'
    'cf2e7a2d00787f754028e7459688c2755a406e632ce48b60952fa4ff7ed6f4b7'
    'd6fcbd0ea7a5a4c42d326286b60bbd5b1d476b8a6752046fa28133e05351c1fe')
    sha256sums_i686=('9a286a85c16ca5b6a02419af1aedbfe6e8b89bcabdcb32670ead3f26c09eadfd'
    '2fb8c26e237883f39de57a264873b21bcdfc5b6b0c1e7c60cec8d141e5db33ba'
    'SKIP')
    sha256sums_x86_64=('54009b369b95a77ab13f6dd7cdbe22b0785b6314cae3a6c39190b48f4c4b12ce'
    '6d0580f05db9cf47dd097326c2f3c0e493854493544d32692ab63290e12fc3e1'
    'SKIP')
    validpgpkeys=(
    'ABAF11C65A2970B130ABE3C479BE3E4300411886' # Linux Torvalds
    '647F28654894E3BD457199BE38DBBDC86092693E' # Greg Kroah-Hartman
    '5F885602C7FD0951F565E27949F67298E6366A92' # Claire Farron
    [[ "$CARCH" = "i686" ]] && _tresorpatch="tresor-patch-3.6.2_i686"
    [[ "$CARCH" = "x86_64" ]] && _tresorpatch="tresor-patch-3.8.2_aesni"
    _kernelname=${pkgbase#linux}
    prepare() {
    cd "${srcdir}/${_srcname}"
    # add upstream patch
    patch -p1 -i "${srcdir}/patch-${pkgver}"
    # add latest fixes from stable queue, if needed
    # http://git.kernel.org/?p=linux/kernel/git/stable/stable-queue.git
    # set DEFAULT_CONSOLE_LOGLEVEL to 4 (same value as the 'quiet' kernel param)
    # remove this when a Kconfig knob is made available by upstream
    # (relevant patch sent upstream: https://lkml.org/lkml/2011/7/26/227)
    patch -p1 -i "${srcdir}/change-default-console-loglevel.patch"
    # Fix vhci warning in kmod (to restore every kernel maintainer's sanity)
    msg "Patching source to fix vhci warning in kmod"
    patch -p1 -i "${srcdir}/0001-Bluetooth-allocate-static-minor-for-vhci.patch"
    # Fix atkbd aliases
    msg "Patching source to fix atkbd aliases"
    patch -p1 -i "${srcdir}/0002-module-allow-multiple-calls-to-MODULE_DEVICE_TABLE-p.patch"
    patch -p1 -i "${srcdir}/0003-module-remove-MODULE_GENERIC_TABLE.patch"
    # Fix generation of symbol CRCs
    # http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=dc53324060f324e8af6867f57bf4891c13c6ef18
    msg "Patching source to fix generation of symbol CRCs"
    patch -p1 -i "${srcdir}/0006-genksyms-fix-typeof-handling.patch"
    # TRESOR Runs Encryption Securely Outside RAM
    # i.e. the purpose of this package :-)
    msg "Patching TRESOR for linux"
    # Initialized the patched TRESOR file with the upstream patch.
    cp "${srcdir}/${_tresorpatch}" "${_tresorpatch}.patched"
    patch --follow-symlinks "${_tresorpatch}.patched" "${srcdir}/${_tresorpatch}.patch"
    msg "Patching source with TRESOR"
    patch -p1 -i "${_tresorpatch}.patched"
    if [ "${CARCH}" = "x86_64" ]; then
    cat "${srcdir}/config.x86_64" > ./.config
    else
    cat "${srcdir}/config" > ./.config
    fi
    if [ "${_kernelname}" != "" ]; then
    sed -i "s|CONFIG_LOCALVERSION=.*|CONFIG_LOCALVERSION=\"${_kernelname}\"|g" ./.config
    sed -i "s|CONFIG_LOCALVERSION_AUTO=.*|CONFIG_LOCALVERSION_AUTO=n|" ./.config
    fi
    # set extraversion to pkgrel
    sed -ri "s|^(EXTRAVERSION =).*|\1 -${pkgrel}|" Makefile
    # don't run depmod on 'make install'. We'll do this ourselves in packaging
    sed -i '2iexit 0' scripts/depmod.sh
    cd "${srcdir}"
    cc tresor_sysfs.c -o tresor_sysfs
    cd "${srcdir}/${_srcname}"
    # get kernel version
    make prepare
    # load configuration
    # Configure the kernel. Replace the line below with one of your choice.
    #make menuconfig # CLI menu for configuration
    #make nconfig # new CLI menu for configuration
    #make xconfig # X-based configuration
    #make oldconfig # using old config from previous kernel version
    # ... or manually edit .config
    # rewrite configuration
    #yes "" | make config >/dev/null
    make oldconfig
    # save configuration for later reuse
    # if [ "${CARCH}" = "x86_64" ]; then
    # cat .config > "${startdir}/config.x86_64.last"
    # else
    # cat .config > "${startdir}/config.last"
    # fi
    build() {
    cd "${srcdir}/${_srcname}"
    make ${MAKEFLAGS} LOCALVERSION= bzImage modules
    _package() {
    true && pkgdesc="The ${pkgbase/linux/Linux} kernel and modules - stable longtime supported with integrated TRESOR"
    depends=('coreutils' 'linux-firmware' 'kmod' 'mkinitcpio>=0.7')
    optdepends=('crda: to set the correct wireless channels of your country')
    provides=("kernel26${_kernelname}=${pkgver}")
    conflicts=("kernel26${_kernelname}")
    replaces=("kernel26${_kernelname}")
    backup=("etc/mkinitcpio.d/${pkgbase}.preset")
    install=${pkgbase}.install
    # TRESOR sysfs utility - not necessary but nice to have, in case someone
    # enables CONFIG_TRESOR_SYSFS in a fork of this PKGBUILD...
    cd "${srcdir}"
    install -D -m755 tresor_sysfs "${pkgdir}/usr/bin/tresor_sysfs"
    cd "${srcdir}/${_srcname}"
    KARCH=x86
    # get kernel version
    _kernver="$(make LOCALVERSION= kernelrelease)"
    _basekernel=${_kernver%%-*}
    _basekernel=${_basekernel%.*}
    mkdir -p "${pkgdir}"/{lib/modules,lib/firmware,boot}
    make LOCALVERSION= INSTALL_MOD_PATH="${pkgdir}" modules_install
    cp arch/$KARCH/boot/bzImage "${pkgdir}/boot/vmlinuz-${pkgbase}"
    # set correct depmod command for install
    cp -f "${startdir}/${install}" "${startdir}/${install}.pkg"
    true && install=${install}.pkg
    sed \
    -e "s/KERNEL_NAME=.*/KERNEL_NAME=${_kernelname}/" \
    -e "s/KERNEL_VERSION=.*/KERNEL_VERSION=${_kernver}/" \
    -i "${startdir}/${install}"
    # install mkinitcpio preset file for kernel
    install -D -m644 "${srcdir}/${pkgbase}.preset" \
    "${pkgdir}/etc/mkinitcpio.d/${pkgbase}.preset"
    sed \
    -e "1s|'linux.*'|'${pkgbase}'|" \
    -e "s|ALL_kver=.*|ALL_kver=\"/boot/vmlinuz-${pkgbase}\"|" \
    -e "s|default_image=.*|default_image=\"/boot/initramfs-${pkgbase}.img\"|" \
    -e "s|fallback_image=.*|fallback_image=\"/boot/initramfs-${pkgbase}-fallback.img\"|" \
    -i "${pkgdir}/etc/mkinitcpio.d/${pkgbase}.preset"
    # remove build and source links
    rm -f "${pkgdir}"/lib/modules/${_kernver}/{source,build}
    # remove the firmware
    rm -rf "${pkgdir}/lib/firmware"
    # gzip -9 all modules to save 100MB of space
    find "${pkgdir}" -name '*.ko' -exec gzip -9 {} \;
    # make room for external modules
    ln -s "../extramodules-${_basekernel}${_kernelname:--ARCH}" \
    "${pkgdir}/lib/modules/${_kernver}/extramodules"
    # add real version for building modules and running depmod from post_install/upgrade
    mkdir -p "${pkgdir}/lib/modules/extramodules-${_basekernel}${_kernelname:--ARCH}"
    echo "${_kernver}" > \
    "${pkgdir}/lib/modules/extramodules-${_basekernel}${_kernelname:--ARCH}/version"
    # Now we call depmod...
    depmod -b "${pkgdir}" -F System.map "${_kernver}"
    # move module tree /lib -> /usr/lib
    mkdir -p "${pkgdir}/usr"
    mv "${pkgdir}/lib" "${pkgdir}/usr/"
    # add vmlinux
    install -D -m644 vmlinux "${pkgdir}/usr/lib/modules/${_kernver}/build/vmlinux"
    _package-headers() {
    true && pkgdesc="Header files and scripts for building modules for ${pkgbase/linux/Linux} kernel"
    provides=("kernel26${_kernelname}-headers=${pkgver}")
    conflicts=("kernel26${_kernelname}-headers")
    replaces=("kernel26${_kernelname}-headers")
    install -dm755 "${pkgdir}/usr/lib/modules/${_kernver}"
    cd "${srcdir}/${_srcname}"
    install -D -m644 Makefile \
    "${pkgdir}/usr/lib/modules/${_kernver}/build/Makefile"
    install -D -m644 kernel/Makefile \
    "${pkgdir}/usr/lib/modules/${_kernver}/build/kernel/Makefile"
    install -D -m644 .config \
    "${pkgdir}/usr/lib/modules/${_kernver}/build/.config"
    mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/include"
    for i in acpi asm-generic config crypto drm generated keys linux math-emu \
    media net pcmcia scsi sound trace uapi video xen; do
    cp -a include/${i} "${pkgdir}/usr/lib/modules/${_kernver}/build/include/"
    done
    # copy arch includes for external modules
    mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/x86"
    cp -a arch/x86/include "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/x86/"
    # copy files necessary for later builds, like nvidia and vmware
    cp Module.symvers "${pkgdir}/usr/lib/modules/${_kernver}/build"
    cp -a scripts "${pkgdir}/usr/lib/modules/${_kernver}/build"
    # fix permissions on scripts dir
    chmod og-w -R "${pkgdir}/usr/lib/modules/${_kernver}/build/scripts"
    mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/.tmp_versions"
    mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/${KARCH}/kernel"
    cp arch/${KARCH}/Makefile "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/${KARCH}/"
    if [ "${CARCH}" = "i686" ]; then
    cp arch/${KARCH}/Makefile_32.cpu \
    "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/${KARCH}/"
    fi
    cp arch/${KARCH}/kernel/asm-offsets.s \
    "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/${KARCH}/kernel/"
    # add docbook makefile
    install -D -m644 Documentation/DocBook/Makefile \
    "${pkgdir}/usr/lib/modules/${_kernver}/build/Documentation/DocBook/Makefile"
    # add dm headers
    mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/md"
    cp drivers/md/*.h "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/md"
    # add inotify.h
    mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/include/linux"
    cp include/linux/inotify.h "${pkgdir}/usr/lib/modules/${_kernver}/build/include/linux/"
    # add wireless headers
    mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/net/mac80211/"
    cp net/mac80211/*.h "${pkgdir}/usr/lib/modules/${_kernver}/build/net/mac80211/"
    # add dvb headers for external modules
    # in reference to:
    # http://bugs.archlinux.org/task/9912
    mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/dvb-core"
    cp drivers/media/dvb-core/*.h \
    "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/dvb-core/"
    # and...
    # http://bugs.archlinux.org/task/11194
    mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/include/config/dvb/"
    cp include/config/dvb/*.h \
    "${pkgdir}/usr/lib/modules/${_kernver}/build/include/config/dvb/"
    # add dvb headers for http://mcentral.de/hg/~mrec/em28xx-new
    # in reference to:
    # http://bugs.archlinux.org/task/13146
    mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/dvb-frontends/"
    cp drivers/media/dvb-frontends/lgdt330x.h \
    "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/dvb-frontends/"
    mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/i2c/"
    cp drivers/media/i2c/msp3400-driver.h \
    "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/i2c/"
    # add dvb headers
    # in reference to:
    # http://bugs.archlinux.org/task/20402
    mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/usb/dvb-usb"
    cp drivers/media/usb/dvb-usb/*.h \
    "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/usb/dvb-usb/"
    mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/dvb-frontends"
    cp drivers/media/dvb-frontends/*.h \
    "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/dvb-frontends/"
    mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/tuners"
    cp drivers/media/tuners/*.h \
    "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/tuners/"
    # add xfs and shmem for aufs building
    mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/fs/xfs"
    mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/mm"
    cp fs/xfs/xfs_sb.h "${pkgdir}/usr/lib/modules/${_kernver}/build/fs/xfs/xfs_sb.h"
    # copy in Kconfig files
    for i in $(find . -name "Kconfig*"); do
    mkdir -p "${pkgdir}"/usr/lib/modules/${_kernver}/build/`echo ${i} | sed 's|/Kconfig.*||'`
    cp ${i} "${pkgdir}/usr/lib/modules/${_kernver}/build/${i}"
    done
    chown -R root.root "${pkgdir}/usr/lib/modules/${_kernver}/build"
    find "${pkgdir}/usr/lib/modules/${_kernver}/build" -type d -exec chmod 755 {} \;
    # strip scripts directory
    find "${pkgdir}/usr/lib/modules/${_kernver}/build/scripts" -type f -perm -u+w 2>/dev/null | while read binary ; do
    case "$(file -bi "${binary}")" in
    *application/x-sharedlib*) # Libraries (.so)
    /usr/bin/strip ${STRIP_SHARED} "${binary}";;
    *application/x-archive*) # Libraries (.a)
    /usr/bin/strip ${STRIP_STATIC} "${binary}";;
    *application/x-executable*) # Binaries
    /usr/bin/strip ${STRIP_BINARIES} "${binary}";;
    esac
    done
    # remove unneeded architectures
    rm -rf "${pkgdir}"/usr/lib/modules/${_kernver}/build/arch/{alpha,arc,arm,arm26,arm64,avr32,blackfin,c6x,cris,frv,h8300,hexagon,ia64,m32r,m68k,m68knommu,metag,mips,microblaze,mn10300,openrisc,parisc,powerpc,ppc,s390,score,sh,sh64,sparc,sparc64,tile,unicore32,um,v850,xtensa}
    _package-docs() {
    true && pkgdesc="Kernel hackers manual - HTML documentation that comes with the ${pkgbase/linux/Linux} kernel"
    provides=("kernel26${_kernelname}-docs=${pkgver}")
    conflicts=("kernel26${_kernelname}-docs")
    replaces=("kernel26${_kernelname}-docs")
    cd "${srcdir}/${_srcname}"
    mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build"
    cp -al Documentation "${pkgdir}/usr/lib/modules/${_kernver}/build"
    find "${pkgdir}" -type f -exec chmod 444 {} \;
    find "${pkgdir}" -type d -exec chmod 755 {} \;
    # remove a file already in linux package
    rm -f "${pkgdir}/usr/lib/modules/${_kernver}/build/Documentation/DocBook/Makefile"
    # true && is a workaround for AUR problem with split packages:
    true && pkgname=("${pkgbase}" "${pkgbase}-headers" "${pkgbase}-docs")
    for _p in ${pkgname[@]}; do
    eval "package_${_p}() {
    _package${_p#${pkgbase}}
    done
    EDIT: Here is the resulting source tarball for mkaurball.
    Last edited by clfarron4 (2015-01-12 09:37:11)

    OK, so either I'm committing a huge stupid with both TRESOR packages or there is actually a problem with makepkg. I've done similar changes with the linux-tresor PKGBUILD and it's doing the same thing.
    PKGBUILD:
    # Maintainers:
    # Claire Farron <[email protected]>
    # Andes Ho <[email protected]> (Secondary Package Tester)
    # Former Maintainer(s)
    # Ido Rosen <[email protected]>
    # xerc <aur[at]xerc.de>
    # Contributor(s) of tresor-patch-3.6.2_i686.patch and consolidation of patches
    # Seth Dickson <[email protected]>
    # Contributor(s) of the linux PKGBUILD
    # Tobias Powalowski <[email protected]>
    # Thomas Baechler <[email protected]>
    ### Do not edit below this line unless you know what you're doing
    pkgbase=linux-tresor # Build stock kernel with TRESOR patches
    #pkgbase=linux-custom # Build kernel with a different name
    _srcname=linux-3.18
    pkgver=3.18.2
    pkgrel=1
    arch=('i686' 'x86_64')
    url="http://www1.informatik.uni-erlangen.de/tresor"
    license=('GPL2')
    makedepends=('xmlto' 'docbook-xsl' 'kmod' 'inetutils' 'bc')
    options=('!strip')
    source=("https://www.kernel.org/pub/linux/kernel/v3.x/${_srcname}.tar.xz"
    "https://www.kernel.org/pub/linux/kernel/v3.x/${_srcname}.tar.sign"
    "https://www.kernel.org/pub/linux/kernel/v3.x/patch-${pkgver}.xz"
    "https://www.kernel.org/pub/linux/kernel/v3.x/patch-${pkgver}.sign"
    # the main kernel config files
    'config' 'config.x86_64'
    # standard config files for mkinitcpio ramdisk
    "${pkgbase}.preset"
    "${pkgbase}.install"
    'change-default-console-loglevel.patch'
    'http://www1.informatik.uni-erlangen.de/filepool/projects/tresor/tresor_sysfs.c')
    source_i686+=("http://www1.informatik.uni-erlangen.de/filepool/projects/tresor/tresor-patch-3.6.2_i686"
    'tresor-patch-3.6.2_i686.patch'
    'tresor-patch-3.6.2_i686.patch.sig')
    source_x86_64+=("http://www1.informatik.uni-erlangen.de/filepool/projects/tresor/tresor-patch-3.8.2_aesni"
    'tresor-patch-3.8.2_aesni.patch'
    'tresor-patch-3.8.2_aesni.patch.sig')
    sha256sums=('becc413cc9e6d7f5cc52a3ce66d65c3725bc1d1cc1001f4ce6c32b69eb188cbd'
    'SKIP'
    '927a30c152a193d22242de21b99c9765fb0086b0aa3fabd31938ffc6e1b3f37c'
    'SKIP'
    'b0f867da9c07d778014c52afe2df59b86122b0d4de2ea8003303855a0750e90d'
    'b76fa6691c4ab19d11e346112e8c021c88578950ed19468f115905e74cb0495e'
    'e17c0209dcb887173adbb4cc69fe0799b01ed9b9b7c487d1d023daa99ee073e1'
    '390c0b348c0f42ba760587e9df3098c62a3b6bd5d522eefb51c7a18f29069751'
    '1256b241cd477b265a3c2d64bdc19ffe3c9bbcee82ea3994c590c2c76e767d99'
    'd6fcbd0ea7a5a4c42d326286b60bbd5b1d476b8a6752046fa28133e05351c1fe')
    sha256sums_i686=('9a286a85c16ca5b6a02419af1aedbfe6e8b89bcabdcb32670ead3f26c09eadfd'
    '800f592847d2a20679630491b8f657cb912abc65f9f2daecf804b6dc2f3b9352'
    'SKIP')
    sha256sums_x86_64=('54009b369b95a77ab13f6dd7cdbe22b0785b6314cae3a6c39190b48f4c4b12ce'
    '9415840fe80f4e2f2b44c0762d8c650e5119fadc3cb494c4812406f6627f26c3'
    'SKIP')
    validpgpkeys=(
    'ABAF11C65A2970B130ABE3C479BE3E4300411886' # Linux Torvalds
    '647F28654894E3BD457199BE38DBBDC86092693E' # Greg Kroah-Hartman
    '5F885602C7FD0951F565E27949F67298E6366A92' # Claire Farron
    [[ "$CARCH" = "i686" ]] && _tresorpatch="tresor-patch-3.6.2_i686"
    [[ "$CARCH" = "x86_64" ]] && _tresorpatch="tresor-patch-3.8.2_aesni"
    _kernelname=${pkgbase#linux}
    prepare() {
    cd "${srcdir}/${_srcname}"
    # add upstream patch
    patch -p1 -i "${srcdir}/patch-${pkgver}"
    # add latest fixes from stable queue, if needed
    # http://git.kernel.org/?p=linux/kernel/git/stable/stable-queue.git
    # set DEFAULT_CONSOLE_LOGLEVEL to 4 (same value as the 'quiet' kernel param)
    # remove this when a Kconfig knob is made available by upstream
    # (relevant patch sent upstream: https://lkml.org/lkml/2011/7/26/227)
    patch -p1 -i "${srcdir}/change-default-console-loglevel.patch"
    # TRESOR Runs Encryption Securely Outside RAM
    # i.e. the purpose of this package :-)
    msg "Patching TRESOR for linux"
    # Initialized the patched TRESOR file with the upstream patch.
    cp "${srcdir}/${_tresorpatch}" "${_tresorpatch}.patched"
    patch --follow-symlinks "${_tresorpatch}.patched" "${srcdir}/${_tresorpatch}.patch"
    msg "Patching source with TRESOR"
    patch -p1 -i "${_tresorpatch}.patched"
    if [ "${CARCH}" = "x86_64" ]; then
    cat "${srcdir}/config.x86_64" > ./.config
    else
    cat "${srcdir}/config" > ./.config
    fi
    if [ "${_kernelname}" != "" ]; then
    sed -i "s|CONFIG_LOCALVERSION=.*|CONFIG_LOCALVERSION=\"${_kernelname}\"|g" ./.config
    sed -i "s|CONFIG_LOCALVERSION_AUTO=.*|CONFIG_LOCALVERSION_AUTO=n|" ./.config
    fi
    # set extraversion to pkgrel
    sed -ri "s|^(EXTRAVERSION =).*|\1 -${pkgrel}|" Makefile
    # don't run depmod on 'make install'. We'll do this ourselves in packaging
    sed -i '2iexit 0' scripts/depmod.sh
    cd "${srcdir}"
    cc tresor_sysfs.c -o tresor_sysfs
    cd "${srcdir}/${_srcname}"
    # get kernel version
    make prepare
    # load configuration
    # Configure the kernel. Replace the line below with one of your choice.
    #make menuconfig # CLI menu for configuration
    #make nconfig # new CLI menu for configuration
    #make xconfig # X-based configuration
    #make oldconfig # using old config from previous kernel version
    # ... or manually edit .config
    # rewrite configuration
    #yes "" | make config >/dev/null
    make oldconfig
    # save configuration for later reuse
    # if [ "${CARCH}" = "x86_64" ]; then
    # cat .config > "${startdir}/config.x86_64.last"
    # else
    # cat .config > "${startdir}/config.last"
    # fi
    build() {
    cd "${srcdir}/${_srcname}"
    make ${MAKEFLAGS} LOCALVERSION= bzImage modules
    _package() {
    pkgdesc="The ${pkgbase/linux/Linux} kernel and modules with integrated TRESOR"
    [ "${pkgbase}" = "linux" ] && groups=('base')
    depends=('coreutils' 'linux-firmware' 'kmod' 'mkinitcpio>=0.7')
    optdepends=('crda: to set the correct wireless channels of your country')
    provides=("kernel26${_kernelname}=${pkgver}")
    conflicts=("kernel26${_kernelname}")
    replaces=("kernel26${_kernelname}")
    backup=("etc/mkinitcpio.d/${pkgbase}.preset")
    install=${pkgbase}.install
    # TRESOR sysfs utility - not necessary but nice to have, in case someone
    # enables CONFIG_TRESOR_SYSFS in a fork of this PKGBUILD...
    cd "${srcdir}"
    install -D -m755 tresor_sysfs "${pkgdir}/usr/bin/tresor_sysfs"
    cd "${srcdir}/${_srcname}"
    KARCH=x86
    # get kernel version
    _kernver="$(make LOCALVERSION= kernelrelease)"
    _basekernel=${_kernver%%-*}
    _basekernel=${_basekernel%.*}
    mkdir -p "${pkgdir}"/{lib/modules,lib/firmware,boot}
    make LOCALVERSION= INSTALL_MOD_PATH="${pkgdir}" modules_install
    cp arch/$KARCH/boot/bzImage "${pkgdir}/boot/vmlinuz-${pkgbase}"
    # set correct depmod command for install
    cp -f "${startdir}/${install}" "${startdir}/${install}.pkg"
    true && install=${install}.pkg
    sed \
    -e "s/KERNEL_NAME=.*/KERNEL_NAME=${_kernelname}/" \
    -e "s/KERNEL_VERSION=.*/KERNEL_VERSION=${_kernver}/" \
    -i "${startdir}/${install}"
    # install mkinitcpio preset file for kernel
    install -D -m644 "${srcdir}/${pkgbase}.preset" \
    "${pkgdir}/etc/mkinitcpio.d/${pkgbase}.preset"
    sed \
    -e "1s|'linux.*'|'${pkgbase}'|" \
    -e "s|ALL_kver=.*|ALL_kver=\"/boot/vmlinuz-${pkgbase}\"|" \
    -e "s|default_image=.*|default_image=\"/boot/initramfs-${pkgbase}.img\"|" \
    -e "s|fallback_image=.*|fallback_image=\"/boot/initramfs-${pkgbase}-fallback.img\"|" \
    -i "${pkgdir}/etc/mkinitcpio.d/${pkgbase}.preset"
    # remove build and source links
    rm -f "${pkgdir}"/lib/modules/${_kernver}/{source,build}
    # remove the firmware
    rm -rf "${pkgdir}/lib/firmware"
    # gzip -9 all modules to save 100MB of space
    find "${pkgdir}" -name '*.ko' -exec gzip -9 {} \;
    # make room for external modules
    ln -s "../extramodules-${_basekernel}${_kernelname:--ARCH}" "${pkgdir}/lib/modules/${_kernver}/extramodules"
    # add real version for building modules and running depmod from post_install/upgrade
    mkdir -p "${pkgdir}/lib/modules/extramodules-${_basekernel}${_kernelname:--ARCH}"
    echo "${_kernver}" > "${pkgdir}/lib/modules/extramodules-${_basekernel}${_kernelname:--ARCH}/version"
    # Now we call depmod...
    depmod -b "${pkgdir}" -F System.map "${_kernver}"
    # move module tree /lib -> /usr/lib
    mkdir -p "${pkgdir}/usr"
    mv "${pkgdir}/lib" "${pkgdir}/usr/"
    # add vmlinux
    install -D -m644 vmlinux "${pkgdir}/usr/lib/modules/${_kernver}/build/vmlinux"
    _package-headers() {
    pkgdesc="Header files and scripts for building modules for ${pkgbase/linux/Linux} kernel"
    provides=("kernel26${_kernelname}-headers=${pkgver}")
    conflicts=("kernel26${_kernelname}-headers")
    replaces=("kernel26${_kernelname}-headers")
    install -dm755 "${pkgdir}/usr/lib/modules/${_kernver}"
    cd "${srcdir}/${_srcname}"
    install -D -m644 Makefile \
    "${pkgdir}/usr/lib/modules/${_kernver}/build/Makefile"
    install -D -m644 kernel/Makefile \
    "${pkgdir}/usr/lib/modules/${_kernver}/build/kernel/Makefile"
    install -D -m644 .config \
    "${pkgdir}/usr/lib/modules/${_kernver}/build/.config"
    mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/include"
    for i in acpi asm-generic config crypto drm generated keys linux math-emu \
    media net pcmcia scsi sound trace uapi video xen; do
    cp -a include/${i} "${pkgdir}/usr/lib/modules/${_kernver}/build/include/"
    done
    # copy arch includes for external modules
    mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/x86"
    cp -a arch/x86/include "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/x86/"
    # copy files necessary for later builds, like nvidia and vmware
    cp Module.symvers "${pkgdir}/usr/lib/modules/${_kernver}/build"
    cp -a scripts "${pkgdir}/usr/lib/modules/${_kernver}/build"
    # fix permissions on scripts dir
    chmod og-w -R "${pkgdir}/usr/lib/modules/${_kernver}/build/scripts"
    mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/.tmp_versions"
    mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/${KARCH}/kernel"
    cp arch/${KARCH}/Makefile "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/${KARCH}/"
    if [ "${CARCH}" = "i686" ]; then
    cp arch/${KARCH}/Makefile_32.cpu "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/${KARCH}/"
    fi
    cp arch/${KARCH}/kernel/asm-offsets.s "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/${KARCH}/kernel/"
    # add docbook makefile
    install -D -m644 Documentation/DocBook/Makefile \
    "${pkgdir}/usr/lib/modules/${_kernver}/build/Documentation/DocBook/Makefile"
    # add dm headers
    mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/md"
    cp drivers/md/*.h "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/md"
    # add inotify.h
    mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/include/linux"
    cp include/linux/inotify.h "${pkgdir}/usr/lib/modules/${_kernver}/build/include/linux/"
    # add wireless headers
    mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/net/mac80211/"
    cp net/mac80211/*.h "${pkgdir}/usr/lib/modules/${_kernver}/build/net/mac80211/"
    # add dvb headers for external modules
    # in reference to:
    # http://bugs.archlinux.org/task/9912
    mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/dvb-core"
    cp drivers/media/dvb-core/*.h "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/dvb-core/"
    # and...
    # http://bugs.archlinux.org/task/11194
    mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/include/config/dvb/"
    cp include/config/dvb/*.h "${pkgdir}/usr/lib/modules/${_kernver}/build/include/config/dvb/"
    # add dvb headers for http://mcentral.de/hg/~mrec/em28xx-new
    # in reference to:
    # http://bugs.archlinux.org/task/13146
    mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/dvb-frontends/"
    cp drivers/media/dvb-frontends/lgdt330x.h "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/dvb-frontends/"
    mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/i2c/"
    cp drivers/media/i2c/msp3400-driver.h "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/i2c/"
    # add dvb headers
    # in reference to:
    # http://bugs.archlinux.org/task/20402
    mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/usb/dvb-usb"
    cp drivers/media/usb/dvb-usb/*.h "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/usb/dvb-usb/"
    mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/dvb-frontends"
    cp drivers/media/dvb-frontends/*.h "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/dvb-frontends/"
    mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/tuners"
    cp drivers/media/tuners/*.h "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/tuners/"
    # add xfs and shmem for aufs building
    mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/fs/xfs"
    mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/mm"
    # removed in 3.17 series
    # cp fs/xfs/xfs_sb.h "${pkgdir}/usr/lib/modules/${_kernver}/build/fs/xfs/xfs_sb.h"
    # copy in Kconfig files
    for i in $(find . -name "Kconfig*"); do
    mkdir -p "${pkgdir}"/usr/lib/modules/${_kernver}/build/`echo ${i} | sed 's|/Kconfig.*||'`
    cp ${i} "${pkgdir}/usr/lib/modules/${_kernver}/build/${i}"
    done
    chown -R root.root "${pkgdir}/usr/lib/modules/${_kernver}/build"
    find "${pkgdir}/usr/lib/modules/${_kernver}/build" -type d -exec chmod 755 {} \;
    # strip scripts directory
    find "${pkgdir}/usr/lib/modules/${_kernver}/build/scripts" -type f -perm -u+w 2>/dev/null | while read binary ; do
    case "$(file -bi "${binary}")" in
    *application/x-sharedlib*) # Libraries (.so)
    /usr/bin/strip ${STRIP_SHARED} "${binary}";;
    *application/x-archive*) # Libraries (.a)
    /usr/bin/strip ${STRIP_STATIC} "${binary}";;
    *application/x-executable*) # Binaries
    /usr/bin/strip ${STRIP_BINARIES} "${binary}";;
    esac
    done
    # remove unneeded architectures
    rm -rf "${pkgdir}"/usr/lib/modules/${_kernver}/build/arch/{alpha,arc,arm,arm26,arm64,avr32,blackfin,c6x,cris,frv,h8300,hexagon,ia64,m32r,m68k,m68knommu,metag,mips,microblaze,mn10300,openrisc,parisc,powerpc,ppc,s390,score,sh,sh64,sparc,sparc64,tile,unicore32,um,v850,xtensa}
    _package-docs() {
    pkgdesc="Kernel hackers manual - HTML documentation that comes with the ${pkgbase/linux/Linux} kernel"
    provides=("kernel26${_kernelname}-docs=${pkgver}")
    conflicts=("kernel26${_kernelname}-docs")
    replaces=("kernel26${_kernelname}-docs")
    cd "${srcdir}/${_srcname}"
    mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build"
    cp -al Documentation "${pkgdir}/usr/lib/modules/${_kernver}/build"
    find "${pkgdir}" -type f -exec chmod 444 {} \;
    find "${pkgdir}" -type d -exec chmod 755 {} \;
    # remove a file already in linux package
    rm -f "${pkgdir}/usr/lib/modules/${_kernver}/build/Documentation/DocBook/Makefile"
    pkgname=("${pkgbase}" "${pkgbase}-headers" "${pkgbase}-docs")
    for _p in ${pkgname[@]}; do
    eval "package_${_p}() {
    $(declare -f "_package${_p#${pkgbase}}")
    _package${_p#${pkgbase}}
    done
    Running makepkg -S to build the source tarball:
    claire ~/Builds/linux-tresor % makepkg -S
    ==> Making package: linux-tresor 3.18.2-1 (Fri 9 Jan 17:24:58 GMT 2015)
    ==> Retrieving sources...
    -> Downloading linux-3.18.tar.xz...
    % Total % Received % Xferd Average Speed Time Time Time Current
    Dload Upload Total Spent Left Speed
    100 77.1M 100 77.1M 0 0 2852k 0 0:00:27 0:00:27 --:--:-- 5975k
    -> Downloading linux-3.18.tar.sign...
    % Total % Received % Xferd Average Speed Time Time Time Current
    Dload Upload Total Spent Left Speed
    100 473 100 473 0 0 1079 0 --:--:-- --:--:-- --:--:-- 1082
    -> Downloading patch-3.18.2.xz...
    % Total % Received % Xferd Average Speed Time Time Time Current
    Dload Upload Total Spent Left Speed
    100 40932 100 40932 0 0 48079 0 --:--:-- --:--:-- --:--:-- 48042
    -> Downloading patch-3.18.2.sign...
    % Total % Received % Xferd Average Speed Time Time Time Current
    Dload Upload Total Spent Left Speed
    100 819 100 819 0 0 1207 0 --:--:-- --:--:-- --:--:-- 1207
    -> Found config
    -> Found config.x86_64
    -> Found linux-tresor.preset
    -> Found linux-tresor.install
    -> Found change-default-console-loglevel.patch
    -> Downloading tresor_sysfs.c...
    % Total % Received % Xferd Average Speed Time Time Time Current
    Dload Upload Total Spent Left Speed
    100 2299 100 2299 0 0 28726 0 --:--:-- --:--:-- --:--:-- 29101
    -> Downloading tresor-patch-3.6.2_i686...
    % Total % Received % Xferd Average Speed Time Time Time Current
    Dload Upload Total Spent Left Speed
    100 47050 100 47050 0 0 344k 0 --:--:-- --:--:-- --:--:-- 345k
    -> Found tresor-patch-3.6.2_i686.patch
    -> Found tresor-patch-3.6.2_i686.patch.sig
    -> Found patch-3.18.2.sign
    -> Found config
    -> Found config.x86_64
    -> Found linux-tresor.preset
    -> Found linux-tresor.install
    -> Found change-default-console-loglevel.patch
    -> Found tresor_sysfs.c
    -> Downloading tresor-patch-3.8.2_aesni...
    % Total % Received % Xferd Average Speed Time Time Time Current
    Dload Upload Total Spent Left Speed
    100 47192 100 47192 0 0 350k 0 --:--:-- --:--:-- --:--:-- 351k
    -> Found tresor-patch-3.8.2_aesni.patch
    -> Found tresor-patch-3.8.2_aesni.patch.sig
    -> Found patch-3.18.2.sign
    -> Found config
    -> Found config.x86_64
    -> Found linux-tresor.preset
    -> Found linux-tresor.install
    -> Found change-default-console-loglevel.patch
    -> Found tresor_sysfs.c
    ==> Validating source files with sha256sums...
    linux-3.18.tar.xz ... Passed
    linux-3.18.tar.sign ... Skipped
    patch-3.18.2.xz ... Passed
    patch-3.18.2.sign ... Skipped
    config ... Passed
    config.x86_64 ... Passed
    linux-tresor.preset ... Passed
    linux-tresor.install ... Passed
    change-default-console-loglevel.patch ... Passed
    tresor_sysfs.c ... Passed
    ==> Validating source files with sha256sums...
    tresor-patch-3.6.2_i686 ... Passed
    tresor-patch-3.6.2_i686.patch ... Passed
    tresor-patch-3.6.2_i686.patch.sig ... Skipped
    ==> Validating source files with sha256sums...
    tresor-patch-3.8.2_aesni ... Passed
    tresor-patch-3.8.2_aesni.patch ... Passed
    tresor-patch-3.8.2_aesni.patch.sig ... Skipped
    ==> Verifying source file signatures with gpg...
    linux-3.18.tar ... Passed
    patch-3.18.2 ... Passed
    tresor-patch-3.6.2_i686.patch ... Passed
    patch-3.18.2 ... Passed
    tresor-patch-3.8.2_aesni.patch ... Passed
    patch-3.18.2 ... Passed
    ==> Entering fakeroot environment...
    ==> Creating source package...
    -> Adding PKGBUILD...
    -> Generating .SRCINFO file...
    -> Adding config...
    -> Adding config.x86_64...
    -> Adding linux-tresor.preset...
    -> Adding linux-tresor.install...
    -> Adding change-default-console-loglevel.patch...
    -> Adding tresor-patch-3.6.2_i686.patch...
    -> Adding tresor-patch-3.6.2_i686.patch.sig...
    -> Adding config...
    ln: failed to create symbolic link ‘/home/claire/Builds/linux-tresor/srclinks.W5jPjydXO/linux-tresor/config’: File exists
    -> Adding config.x86_64...
    ln: failed to create symbolic link ‘/home/claire/Builds/linux-tresor/srclinks.W5jPjydXO/linux-tresor/config.x86_64’: File exists
    -> Adding linux-tresor.preset...
    ln: failed to create symbolic link ‘/home/claire/Builds/linux-tresor/srclinks.W5jPjydXO/linux-tresor/linux-tresor.preset’: File exists
    -> Adding linux-tresor.install...
    ln: failed to create symbolic link ‘/home/claire/Builds/linux-tresor/srclinks.W5jPjydXO/linux-tresor/linux-tresor.install’: File exists
    -> Adding change-default-console-loglevel.patch...
    ln: failed to create symbolic link ‘/home/claire/Builds/linux-tresor/srclinks.W5jPjydXO/linux-tresor/change-default-console-loglevel.patch’: File exists
    -> Adding tresor-patch-3.8.2_aesni.patch...
    -> Adding tresor-patch-3.8.2_aesni.patch.sig...
    -> Adding config...
    ln: failed to create symbolic link ‘/home/claire/Builds/linux-tresor/srclinks.W5jPjydXO/linux-tresor/config’: File exists
    -> Adding config.x86_64...
    ln: failed to create symbolic link ‘/home/claire/Builds/linux-tresor/srclinks.W5jPjydXO/linux-tresor/config.x86_64’: File exists
    -> Adding linux-tresor.preset...
    ln: failed to create symbolic link ‘/home/claire/Builds/linux-tresor/srclinks.W5jPjydXO/linux-tresor/linux-tresor.preset’: File exists
    -> Adding linux-tresor.install...
    ln: failed to create symbolic link ‘/home/claire/Builds/linux-tresor/srclinks.W5jPjydXO/linux-tresor/linux-tresor.install’: File exists
    -> Adding change-default-console-loglevel.patch...
    ln: failed to create symbolic link ‘/home/claire/Builds/linux-tresor/srclinks.W5jPjydXO/linux-tresor/change-default-console-loglevel.patch’: File exists
    -> Compressing source package...
    ==> Leaving fakeroot environment.
    ==> Source package created: linux-tresor (Fri 9 Jan 17:25:50 GMT 2015)
    makepkg -S 24.38s user 1.40s system 48% cpu 53.129 total
    Here is the resulting source tarball.
    As far as I can see, they should be working PKGBUILDs too which meet the standards.
    EDIT: Here's the bug report
    Last edited by clfarron4 (2015-01-09 17:42:34)

  • Low resolution - a result of too much compression or is it the source file?

    a friend of mine is helping me produce a DVD using DVD Studio Pro 4 and as our source files, we are using 14 video files that were generated using Final Cut Pro.
    when the final DVD is produced, we were both disappointed to discover that the screen resolution appears to be quite low - the darks are pixelated and the entire image lacks sharpness. it looks fine on anything up to a large computer screen, but it definitely seems inadequate when viewed on a large flat screen HD television.
    the DVD is not HD formatted, by the way.
    being quite the amateur on DVD Studio Pro, my question is this: have the original video files been compressed too much and is this the cause of the problem?
    the 14 video files that were loaded into DVD Studio Pro, in their original format, take up over 15 GB of space - they are all quicktime files (.mov formatted), generated from FINAL CUT PRO as DVCPRO files in NTSC (those were my export settings) - yet when all of the files are compressed and loaded into DVD Studio Pro, they take up only 1.4 GB.
    it would seem that we have at least 3 GB's to spare.
    any feedback would be welcomed, and please excuse me for my beginner questions.
    additionally, it would be great if anyone could take the time to explain to me where i can change the compression settings / preferences in DVD Studio Pro.
    again, thanks very much.

    Ok, do not use DVD SP to compress your video. Use Compressor to create a .m2v file of your video and a .ac3 file of your audio. Tutorials can be found at; http://www.kenstone.net/fcphomepage/fcp_homepageindex.html
    With Compressor you will have much more control over the encoding process and you can get better results. That being said, Compressor is good, but there are even better third party MPEG-2 encoders out there. They will give you even better results at lower bitrates.

Maybe you are looking for