Speaker recommendations wanted for editing in Premiere Pro CC

For several years I have been using a pair of M-Audio near field speakers that were recommended to me for video editing. Apparently, these speakers are widely used. However, I find their sound to be incredibly flat and midrange, with few highs or lows. Lately, I have been getting some unpleasant surprises when listening to my mixes on other speakers or devices; I often hear undesired high and low frequency sounds that I never heard in my studio. This happens even when listening on such lowly gear as iPhone ear buds! The other day I was listening to a mix with a pair of Apple buds and heard distant voices in a rural ambience clip that I never heard on the M-Audio speakers.
Can anyone recommend a better pair of speakers?

Thanks Richarad ..It has solved the problem but still crashes some times .As the programme has the break (bumper)after every five minutes ,i hope it will not compress bumper time too after export.

Similar Messages

I am using 4K Footages for editing in Premiere pro CC 2014, but its getting crash in between at every 15 to 20 mins. Kindly suggest how can it be solved, does any plugins or settings needed to edit 4K footages? Also would like to mention that footages fra

I am using 4K Footages for editing in Premiere pro CC 2014, but its getting crash in between at every 15 to 20 mins. Kindly suggest how can it be solved, does any plugins or settings needed to edit 4K footages? Also would like to mention that footages frame rates are 29.97 and i have set timeline to 25 FPS is requirement by client. kindly revert. Thanks

Thanks Richarad ..It has solved the problem but still crashes some times .As the programme has the break (bumper)after every five minutes ,i hope it will not compress bumper time too after export.

Which of these laptops to buy for editing with premiere pro

Hello guys,
I am looking for a new laptop to replace my dead beloved desktop L
I will be editing mainly with Adobe Premiere CS6 and After Effects CS6 and do some graphic works (PS,ILL…)
After a long research the choice was narrowed to the options mentioned bellow. Which one do you recommend ? Is there any other option in the same price range that I did not consider?
P.S. Please pay attention to the Hard disk variations!!! Would that make a great difference in editing?
Thank you in advance J
ASUS N550JV-CM160P
Intel Core i7-4700HQ (6M Cache, up to 3.40 GHz),
16GB DDR3L 1600 MHz,
750 GB SATA 7200 rpm,
NVIDIA GeForce GT 750M 4096 MB DDR3,
39.624 cm (15.6 ") 16:9 IPS FHD (1920x1080) LED Backlight,
Super-Multi DVD DL,
10/100/1000 Base T, 802.11 b/g/n,
Bluetooth 4.0,
Windows 8 Pro
LENOVO IDEAPAD Y510P
Intel Core i7-4700HQ (6M Cache, up to 3.40 GHz),
16GB DDR3L 1600 MHz,
256 GB Solid State Disc
2x NVIDIA Geforce GT 750M, 2048 MB GDDR5 VRAM
39.624 cm (15.6 ") 16:9 IPS FHD (1920x1080) LED Backlight,
Windows 8 64 Bit
OR same Lenovo with 1024 GB 5400rpm AND 24 GB Solid State Disc!!!!

Sadnakhleh wrote:
That is a 17" right? I am going to buy a 15" I think.
The biggest problem with the Asus in question is that it will be really hard to upgrade it and I still did not find a model with SSD.
I found a comparision review here: http://www.notebookcheck.net/Review-Asus-N550JV-CN201H-Notebook.98311. 0.html
The Asus scores better in the cinebench sector (slightly with OpenGL and much with CPU) and the Lenovo is better in the Pcmark7 and the 3dmark11. What are these tests? and which one is more important when it comes to video editing?
Thank you again for your time and efferts
P.S. I am studying the article about Hard disks, it is really interesting!!! thanks
Correct it is a 17-inch, and of course it weighs and costs slightly more than a 15.6-inch
It is a very simple task to upgrade the unit to an dual SSD system, and memory upgrade is very easy. You undo one screw on the bottom and (below) this is what you see. Two disk drive carriers with my SSD's installed and two 8 GB SODIMM add on RAM modules
Those benchmarks have very little to do with editing with Premiere, there is only one real comperhensive Premiere benchmark it is our PPBM.

I can edit on Premiere Pro 6 files, but after a dozen keystrokes, the space bar and cursor keys stop working while the save function works

I can edit on Premiere Pro 6 files, but after a dozen keystrokes, the space bar and cursor keys stop working while the save function, render workspace function, export file are still operational. How can I fix it so I may complete my assignment?
Besides DaVinci Resolve, Adobe Creative Suite 6 is the only software on the machine. I am using Windows 7 Professional 64-bit Operating System on AMD FX 6100 six-Core Processor at 3.31gHz and 32 GB RAM memory. There are two SLI-bridged GTX680 NVidia cards.
The software was very stable for the last six months, working with 720P proxy files from 2.5K masters (Blackmagic Design Camera). I am working on a feature-length project that exceeds 1000 edits. I have broken the file into 2 one hour segments.
I have deactivated the software before reinstalling the entire OS from scratch. PP6 was very stable for 48 hours. Then the freezing space bar returns. After a dozen strokes into the project, same problem. I have made cache files store next to originals, I have deleted preview files if they were corrupted and causing instability. Am I missing something?
I have Microsoft Security Essentials for virus protection. I double checked the memory for damage/defect. Nothing says that the motherboard or other components are damaged.
I am in film competition overseas and need to have deliverables in less than a month's time. I lost the last two weeks troubleshooting and this crisis came at an inopportune moment of the project.
Any assistance would be greatly appreciated.

Still getting software freezes but found a way to mitigate for the mean time.
Upon launching Adobe Premiere Pro, hit CTRL-ALT-DEL to launch TaskManager as well.
You will want to highlight Adobe QT32 Server.exe
Right click and select "End Process Tree"
You will get considerable stability in the program, long enough to get timing of cuts done. Be sure to save often.
If the program freezes, do not hit Save. You definitely want to avoid saving the corruption into your TimeLine
CTRL-ALT-DEL to relaunch the TaskManager and highlight Adobe Premiere Pro.exe
Right-click to "End Process"
No need to reboot the whole system; just launch Premiere Pro again and continue with the session. Note that your work reverted to Last Save.
Hope this helps until the bug is fixed.

Converting H.264 for Editing in Premiere Elements 9

Hi!
What is the best way to convert my MOV H.264 files off my Canon T2i for editing in premiere. I've heard several people say that H.264 is NOT an editing codec, and it seems to be true. I am editing a shoot with the files directly off the camera and IT IS SLOW! When you go to export in Premiere it says that AVI files are what you should use for editing in Premiere, but my problem is that I don't know which is the best codec and quality to use. I want Full HD but I'm not sure how to transcode without losing quality. Any suggestions? Please help! Thanks.

Unfortunately, video from the Rebel series isn't supported natively in Premiere Elements 9. (Though it's worth a try. Have you tried one of the DSLR presets that matches your video's resolution?)
The BEST solution is to convert the video to a 1440x1080 MPEG/M2T using Quicktime Pro ($29 from Apple). 1440x1080, as you probably know, is the anamorphic version of 1920x1080, so it is the same resolution.
A 1440x1080 MPEG/M2T video should work perfectly with Premiere Elements' HDV project preset.
Remember: The test to see if you're using the ideal preset is that, when you add the video to your timeline, it will appear without a red line above it.
If you are seeing no red lines above your video but your video editing is still slow, it is most likely an indicator that your computer is not powerful enough to edit hi-def video or that it is not properly tuned.
If you're interested, there are much more detailed explanations for all of this in my books, available on Amazon and at Muvipix.com.

Export of Elements 12 Project for use in Premiere Pro

Hello. Simply (or not so simply), I just want to know if I can export a Premiere Elements 12 Project for use in Premiere Pro CS6 or CC. I would like some form of verification such as a page in a manual or a link to a web page. Just getting the answer "Yes" will not do. Sorry but this has been very difficult to locate and am concerned it can't happen.
Thanks,
BK

"Adobe's target audience is just not likely to later need to edit a Project in a professional NLE."
Thanks Bill and I understand. However, given the current choices of NLE's today and many Professional Users "scrambling" to find replacements for FCP7 and "aging" Avid, I would think that the workflow I'm suggesting might be a cost effective and viable alternative that Adobe should consider very seriously. If it was never brought to their attention before, I'm mentioning it now!
If we can avoid the cost of putting PrPro into the hands of Preditors and leave the Pro Finishing to the real Pros, that would be very helpful not only financially but it would make learning and working with the software much easier for them using Elements.
So, I guess the only way to find out if this works, is to download the trial versions of each and have at it.
Unless someone out there already has both of the most current versions and is willing to try this?
Either way, I'll have to find out sooner or later because we are moving to Pro eventually.
Thanks again,
Bob K.

I can edit in Premiere Pro CC streaming?

I understand that I can edit in Premiere Pro CC streaming.
I have files in the cloud and I want to know what is what there is to do in Premiere.

According to what is explained, Adobe Anywere not does included in the subscription of Premiere CC and After CC, so I have to pay a different fee?

Maximum file size for importing into Premiere Pro CS6

Hi,
I'm considering recording raw video, no compression at 720p, 30 fps for 20-30 min. This woudl result in a file that is close to 80 Gbytes. I'm wondering what the maximum file size for importing into premiere Pro is and if I need to split this file up into smaller pieces. Any recommendations on how I may deal with uncompressed raw video that is pretty long in length?
Thanks,
Serena

There is bound to be some limit somewhere in the program, but you should be well below that. The biggest issue might be whether your computer is up to the task of handling it. If you will post your computer specs., someone will give you comments on that aspect.
Good luck,
Hunt

HOW INSTALL ENCORE CS6 FOR USE IN PREMIERE PRO CC ?

SOY AFICIONADO A LA EDICICION Y POSTPRODUCCION DE VIDEOS, Y ME HE ANIMADO A SUSCRIBIRME A CREATIVE CLOUD, PERO NO CONSIGO INSTALAR ENCORE CS6 PARA PODER UTILIZARLO EN PREMIERE PRO CC, PIDO AYUDA A VER SI ALGUIEN PUDE AYUDARME, GRACIAS.

Thanks a lot, it works perfectly.
El 27/11/2014, a las 20:15, Ann Bens <[email protected]> escribió:
HOW INSTALL ENCORE CS6 FOR USE IN PREMIERE PRO CC ?
created by Ann Bens <https://forums.adobe.com/people/Ann+Bens> in Premiere Pro - View the full discussion <https://forums.adobe.com/message/6967716#6967716>
https://forums.adobe.com/servlet/JiveServlet/downloadImage/2-6967716-699851/EncoreCS6-14.png <https://forums.adobe.com/servlet/JiveServlet/showImage/2-6967716-699851/EncoreCS6-14.png>
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/6967716#6967716 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/6967716#6967716
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Premiere Pro by email <mailto:[email protected]> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=33 81>
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>.

Options for converting '.vob' files for editing in PP Pro CS3...

Hi,
I'm using PP Pro CS3 (Windows) and I have a few projects here where the source material are '.vob' files only.
Now because PP Pro doesn't support that file format, I'm looking for options to convert this footage to a format - suitable for editing in PP Pro CS3 - that does NOT explode in file size.
Converting to uncompressed .avi is up 20 times the file size, DV .avi is about 5-10 times the file size.
Here are the options I've tried so far:
1. importing '.vob' files straight into PP via the Avisynth method
--> works, but PP crashes randomly and it always crashes when rendering more than 2-3 min
--> all my system drivers are up to date
2. renaming to .mpg or .avi
--> works for some files (only) but you get random red frames in your footage
3. converting to mpeg-2 via...
a. Carbon Coder - best quality so far - looks like original
b. Premiere Elements 4 - no de-interlacing option, takes way too long, quality worse than original
c. MPEGStreamclip - no options selectable, quality is worse than original
4. converting to 'DV avi' via...
Carbon Coder - PE 4 - MPEGStreamclip - VirtualDubMod
--> file size explodes (5-10 times of the original .vob file), quality looks on all kinda the same and NOT better than the mpeg-2 output from Carbon Coder - that's why I don't wanna take the storage hit...
Are there any other methods or ways to convert '.vob' files to a suitable editing format (with a reasonable file size) ?
Thanx for your help !
Mike

Take the storage hit and be done with it. Hard drives are cheap these days. Editing takes lots of space. Might as well get used to it.

I have just finished editing in premiere pro, now how do i burn what ive created onto a disc?

I have just finished editing in premiere pro, now how do i burn what i have just created to a dvd?

Are you using Premiere Pro Cloud? (PPro Information FAQ http://forums.adobe.com/message/4200840 for what you need to say when asking a question)
If yes, CAREFULLY read http://helpx.adobe.com/encore/kb/encore-cs6-installed-cc.html and follow ALL instructions
The PPro/Encore tutorial list in message #3 http://forums.adobe.com/message/2276578 may help, with more help in message #5

Video tutorial: Using Replace Edit in Premiere Pro

Here is an excellent tutorial about the Replace Edit in Premiere Pro: From the page: Replace one clip with another in a Timeline

Here's a great tutorial about using the Replace edit function in Premiere Pro by reTooled.net. http://www.retooled.net/?p=253

Converting Nokia N95 MP4 videos for use with Premiere Pro?

What would you say the best way to convert Nokia N95 MP4 videos for use with Premiere Pro is?

Sheesh.
This "
How do I convert my files?" entry at the PPro Wiki might offer some insight.

I want to add just Premiere Pro to my acct, is this possible?

I want to add just Premiere Pro to my acct, is this possible?

You may subscribe to Premiere Pro as an individual program... IF you have a 64bit computer
Cloud Plans https://creative.adobe.com/plans
-and subscription terms http://www.adobe.com/misc/subscription_terms.html
You MUST have a 64bit computer... what is your computer?
Adobe's MINimums http://helpx.adobe.com/premiere-pro/system-requirements.html
-Programs won't display if they will not install on your computer
-http://helpx.adobe.com/creative-cloud/kb/all-apps-displayed-aam.html

I would like to stop my subscription for Audition and Premiere pro?

I would like to stop my subscription for Audition and Premiere pro? I tried many options. Can I call them directly.

Hi there
Contact Customer Care
Choose a product = Creative Cloud
What you need help with = Membership, account, payment
Is your issue related to = Cancel your membership
Click on the blue box "Still need help? Contact us" and you will get the phone/chat options for your country.
Thanks
Bev

Speaker recommendations wanted for editing in Premiere Pro CC

Similar Messages

Maybe you are looking for