Specifying Additional Files in an FTP Sender Adapter

Hi,
Has anyone worked out how to specify additional files in a File/FTP Sender Adapter using the FTP transport protocol? This functionality comes 'standard' in the File/FTP Sender Adapter using NFS transport protocol so that additional files can been included as attachments, however, it doesn't seem to be available when trying to use the FTP protocol.
Thanks in advance.
Regards,
Reuben.

Yes this is available in only NFS mode check sap help
http://help.sap.com/saphelp_nw04/helpdata/en/3c/b4a6490a08cd41a8c91759c3d2f401/frameset.htm
Thanks!

Similar Messages

Specifying additional JMS message attributes in Sender Adapter

Hi,
Iam using sender JMS adapter and I have to use the option " Specify Additional JMS Message Properties" for adding addtionalJMS properties in XI message header.
Once I cselect the option in the below table Iam not able to add new lines to add addtional JMS Message Properties..But In receiver adapter I was able to add the new lines.
Is this option graded in SAP PI 7.3 or relatd to any authorization issue..?
Is anyone faced this issue before.. Please help me out
Thank you

Hi everybody
I'm starting a project where I have to take adptadores JMS and I'm in the same situation kirian, I am need to configure a JMS adapter with version of SAP PI 7.3 and I wonder if anyone can help me or give me manuals leagues where information comes related.
Someone can help me with this information
Regards

FTP sender adapter archives empty files

Hi.
I have a strange problem with the ftp sender adapter.
I receive my file without problems, and the scenario works as it should.
The problem is with the archiving of my processed file.
It writes the file fine to the path specified, but it is empty (user has full file permissions)
The ftp adapter uses content conversion, and I have seen threads in the forum that tells about simular errors. But I have found no solution.
Hope someone can help here.
Regards...
Peter

File Content Conversion is usually associated with Receiver File/FTP adapters
and Archiving the source file is an option at the Sender File/FTP Adapter.
No, content conversion is used both in sender and receiver file/FTP adapters.
In my case, it is in a sender adapter!
I'm not sure what you mean when you said "The ftp adapter uses content conversion,..."
The sender FTP adapter content converts a flat file to XML format!
Can you let us know the details of your scenario?
Like who / what is the sender and who/what is the receiver system?
The scenario looks like this: "FTP -> XI -> RFC", but as mentioned before, the scenario works fine, the problem is in the FTP sender adapter that fails to save the archive file.
If I try to use the file/FTP sender adapter in "file mode", with the same parameters, the archive file is written just fine!
Regards...
Peter

Prevent ftp sender adapter from tranfering files from subdirectories

I have a scenario with a ftp sender adapter. In the configuration of the ftp sender adapter I have defined a base directory "/dir" and a file pattern "*". The directory /dir as a subdirectory /dir/subdir. Now the ftp adapter transfers also files from this directory. But I don't want that. Any solution?

Hi,
I am not sure whether it is made so intentionally be SAP. However, if you wish to resolve this issue, you can specify a wild card for file names, such as the file extension (for example, *.txt).
Hope this helps,
Bhanu

FTP Sender Adapter - File Order

Hi,
can somebody tell me, in which order files are being read via the ftp sender adapter when using wildcards for the filename ?
I need to process the files sorted by name. Is there any possibility to get this done ?
BR,
Martin

hi Martin,
Check this forum discussion.
Re: FTP Sender Adapter - Processing Sequence
and check out Praveen reply regarding your query
regards
Ramesh P

FTP-Sender Adapter ignores files with "known filenames"

Hello experts,
the scenario is FTP -> XI -> IDOC and we have problems with the polling of the files. In communication channel monitoring everything is working fine, but in the FTP folder some files are ignored, although the communication channel is set up for all *.txt-files.
My question is, is it possible that the FTP sender adapter ignores files, if it already has processed a file with the same filename? After renaming the files they all were picked up and archived into another folder. How can I configure the communication channel to pick up ALL *.txt-files in the out-folder?
Best regards
David

Hi David,
What I have observed is, XI always reads files in a certain order (possibly alphabetical or reverse alphabetical). If it finds a file in the source directory that already exists in the archive directory, it will not attempt to read/process the next file (even if the next filename is completely new).
So, if any of the files in the source directory exist in the archive directory, there is a possibility that certain files may get processed and certain wont.
Make sure that none of the files that you put in source directory exist in the archive directory (i.e. all the files are new) and see the output. Let me know if this helps.
PS: I used FTP protocol
Regards,
Riyaz

FTP Sender Adapter, Empty Archive Files

Hi,
When I retrieve files using a FTP sender Communication Channel and I checked the Archive check box (including an existing directory), the file is archived but it does not have any content. It is completely empty.
The original file contains data and is processed correctly. The original file is a csv and I use FCC to convert it to XML.
Anybody any suggestions?
Ron

Hi,
The scenario is FTP --> IDOC scenario.
The config is as follows: (not mentioned = not used)
Source:
Source Directory: /Out
Filename    File*.csv
FTP Connection:
Server: a.b.nl
Port: 21
Dataconnection: Passive
Connection Security: None
Username: user
Password: pass
Connect mode: Per File Transfer
Transfer mode: Binary
Processing:
Quality of Service: Exactly once
Poll Interval: 60 secs
Processing Mode: Archive
Add Timestamp: checked
Archive directory : /usr/sap/Interfaces/
File Type: Text
FCC:
Documentname: File
Recordset Name: Lines
Recordset Structure: Line,*
Recordset Sequence: Ascending
Key field type: String (Case sensitive)
Line.fieldSeparator     ;
Line.endSeparator     nl
Line.fieldNames         VBELN, POSNR, RREL
Best regards
Ron

FTP Sender Adapter - Processing Sequence

Does anybody know what the processing sequence of files is when I using a ftp sender adapter? I can only determine this if I use a file sender adapter (NFS).

Hi,
in sender file ( FTP ) adapter:
when qos :eoio
the sequence the msg processess will be in ascending alphabetical order.
ex: if i have 10 files in a folder
as per the my requirement all the 10 files are picked up at the same time, then
the files will be arranged in queue specified in ascending alphabetical order and processed in the same order.
but, when i use QOS: EO
the same thing is going to happen right!!
picks all the files , processess in ascending alphabetical order to xi..
then what is the use of queue here in eoio???
on the other hand,
in sender file ( NFS ) adapter:
file will be processed based on the processing sequence( either by date or time ).
so both EO and EOIO use the processing sequence... then wat is the work of queue here in EOIO MODE.. any way they are processed according to the proccessing sequence parameter.. ???
Please reply..

FTP sender adapter wait sometime before processing a message

Hi,
I want my FTP sender adapter to wait sometime before processing a message. This is needed in my case since the receiver of the message cannot consume message in, say two seconds, so I would like to configure a "time to wait before processing message" in PI since PI processes all of the files in folder without waiting another poll interval time if more than one exist.
Is this possible in PI 7.0 sp16?
Regards,

HI Tarik
BPM is the solution for this problem. If you are not willing to use BPM other solutions are Adapter module and Scripts
You can write adapter module and use the threads mechanism. Thread.sleep can help you achieve this but you need to set this properly.
Another method is Unix script. Let your actual directory be Dir1 and poll PI to Dir2. Use the script to write files from Dir1 to Dir2 one by one and with time gap. This will work for you.
If you have PI system on Windows i prefer to go with Adapter module.
Thanks
Gaurav

FTP Sender Adapter for OpenVMS

Hi,
did anyone of you use a FTP Sender Adapter on an OpenVMS System?
If I connect via FTP Client (Dos, Unix Shell or Filezilla) this works fine so far but with XI I receive the following error message:
Error occurred while connecting to the FTP server "server:21": java.net.SocketException: Connection timed out:could be due to invalid address
BR Markus

Hi,
Check your FTP server Address and the port number. If you are using SSL / TLS then the port numbers will change.
<b>Cheers,
*RAJ*</b>

Getting dynamically a specific file in FTP sender adapter

Hi all,
I'm getting an idoc in a BPM and there's a field with a file name, which is the one I have to read in the following step.
I'm not sure this is possible, but I'd like to hear from the PI community...
The problem is that in the usual FTP sender comm channel, I have to specify in configuration time the folder and the pattern of the file names to be read. And in my scenario I only know that in execution time (that's possible when the FTP channel is receiver though).
Thanks

Oops!! I misunderstood it
At sender, neither of them would work. In fact, there is no other direct options at sender. You have to specify the filename. As Udo suggested, you have to create multiple channels.
Still if you could explain your BPM configuration, some solution may turn up. You said you are receiving Idoc in BPM and a file too?
Regards,
Prateek

Archiving faulty Source file not working in Sender Adapter FCC

Hi Experts,
I have enabled "Archiving Faulty Source File" in Sender Adapter FCC and pen down the directory path accordingly.
Likewise I also enable the processed mode as "archive" and give it the direcotory path.
However when there is a error flagged in sxmb_moni for this interface, I unable to see any file created in the error folder but I can see a file with timestamp being created in the archive folder.
I have checked the access right to the directory, so this is not an issue. I ran through the forum on this subject and come across the help.sap note on the following
" To archive source files where a permanent error occurred during processing, set the indicator.
A permanent error occurs either during the conversion of the file content, or in a module in the module processor.
More information: MessageTransformBean, Migrating Dispatcher Classes
○ Specify the Directory for Error Archiving.
○ To add a time stamp to the archived file, select Add Time Stamp. "
What is the definition as "permanent error". The error I got in sxmb_moni is a mapping conversion error, so it should be archive this to the error folder, right ?
Anyone have any such setting enabled and working ?
Regards
FNG

The error I got in sxmb_moni is a mapping conversion error, so it should be archive this to the error folder, right ?
No, it is not the case. As mentioned on the SAP Help site, for the faulty file to be archived, the error has to occur in content conversion, or in module processor.
If the error you are getting is in MONI, then it means syntactically the file is correct and hence adapter engine has picked up and sent to integration engine (SXMB_MONI).
-Supriya.

FTP (Sender) Adapter - Polling Problem

Hello everyone!
I'm trying to pick up an XML file using the FTP Adapter (Sender).
Weird thing is that I have set the "polling interval" for 60secs, but the FTP adapter doesn't seem to want to repeat polling at the said time interval.
It only picks up the file once, and after that no more polling occurs.
Could anyone know what the problem might be?
Warm regards,
Glenn
PS. We are on PI 7.0, SP11.

Hi Glenn,
Check the connection mode in FTP adapter.
Connect permanently or connect everytime. Try changing the option and see if it works.
If it still doesnt work then contact the guys who are maintaining the FTP server.
Regards,
Sumit

Save a copy of file sent through FTP Send Port

How can we save a copy of the file sent through an FTP Send Port?
Here are the details of the scenario:
1. I have an Orchestration which after processing, creates a Flat File
2. Orchestration has a Static One Way Send Port with specify later
3. FTP Send Port is bind to the orchestration
Problem is, I don't want to create an extra file send port in the orchestration.
Requirement is:
When orchestration send the flat file to FTP, I want a copy of the file in a local file location.
BizTalk Specialist

Create a Send Port Group with the two ports in question and bind your orchestration to the Group.
Alternatively you can leverage the BizTalk Archiving Pipeline component from codeplex at
http://biztalkarchiving.codeplex.com/ and use this pipeline on your existing send port.
Regards.

Supress Column Heading - File Content Conversion in Sender Adapter

Hi,
Let me give a more clear picture about my scenario. I need to convert CSV File to XML output:-
My source file has column heading and values. The sample data is mentioned hereunder:-
PERNR;KID;PNALT;NACHN;NAME2;VORNA
;1200;1200;Angus
I have created a data type as under:-
DT_LegacyEmployee (Category - Complex Type)
     Employees (Category - Element, Occurence - 1)
          Header (Category - Element, Occurence - 0...1)
               PERNR_H
               KID_H
               PNALT_H
               NACHN_H
               NAME2_H
               VORNA_H
          Employee (Categroy - Element, Type - DT_LegacyEmployee_Row, Occurence - 0...unbounded)
               PERNR
               KID
               PNALT
               NACHN
               NAME2
               VORNA
The file conversion parameters in the file sender adapter are mentioned hereunder:-
Document Name - MT_LegacyEmployee
Document Namespace - http://abc.com/xi
Recordset Name - Employees
Rescordset Structure - Header,1,Employee,*
Recordsets per Message - 1
Key Field Type - String (Case Sensitive)
Employee.fieldSeparator - ;
Employee.endSeparator - 'nl'
Employee.fieldNames - PERNR,KID,PNALT,NACHN,NAME2,VORNA
I dont' have a key field value. How do we remove the header and show only the values in the xml output. I have searched the forum topics as well checked many blogs related to file content conversion, but nothing helped. Kindly advice how to fix this issue. Thanks in advance.
Regards.
Praveen

Hi Praveen,
Change your File Adapter as below
Document Name - MT_LegacyEmployee
Document Namespace - http://abc.com/xi
Recordset Name - Employees
Rescordset Structure - Employee,*
Recordsets per Message - 1
Key Field Type - String (Case Sensitive)
Employee.fieldSeparator - ;
Employee.endSeparator - 'nl'
Employee.fieldNames - PERNR,KID,PNALT,NACHN,NAME2,VORNA
There is no need for the Header required in the data type.
DT_LegacyEmployee (Category - Complex Type)
Employees (Category - Element, Occurence - 1)
Employee (Categroy - Element, Type - DT_LegacyEmployee_Row, Occurence - 0...unbounded)
PERNR
KID
PNALT
NACHN
NAME2
VORNA
Now the trick is in the mapping program
Lets assume your mapping looks like
MT_LegacyEmployee ---> MT_TargetEmployee
- Employees ---> Records
   - Employee ---> Record
     - PERNR ---> TargetPERNR
     - .. so on
When you do a mapping from Employee ---> Record apply the following logic.
(PERNR)--->
             (TestEquals =) --->(NOT)--->
(Constant) --->                                (IF)
(PERNR)                       (IF Without Else) ---> (Record)
                                               (THEN)
                            (Employee)--->
When doing this make sure RightClick on PERNR and Select Context ---> Employees.
By default context would be from Employee and it will give you an error of XSD format. So make sure you are changing the context.

Specifying Additional Files in an FTP Sender Adapter

Similar Messages

Maybe you are looking for