Speeding Up Load Array From Excel subVI

Hi there,
I've got a subVI that loads a 2D double array from an Excel file. Currently, it needs about 500ms between runs to not cause a variant error, something to do with getting everything opened and closed. I was wondering if anybody could see anything obvious that's slowing it down. If you could help me optimise this a little that would be great. Even if I could shave it down to 200ms.
Solved!
Go to Solution.

Here is a quick example of what I'm talking about. Placing the App reference open/close outside the loop gets you down to around 300 ms.
"There is a God shaped vacuum in the heart of every man which cannot be filled by any created thing, but only by God, the Creator, made known through Jesus." - Blaise Pascal
Attachments:
Excel Read 2DArray_loop.vi ‏28 KB

Similar Messages

Sending arrays from Excel into Labview

I want to send an array from Excel VBA into a LabView VI.
The Excel example shows how to send individual numbers and return an array into Excel but not send an array.
Everything tried sends blank arrays into LabView, which can then be modified in LabView and returned to Excel.
A VBA code snippit that does not work is:
Sub LoadData()
' LoadData Macro
' Keyboard Shortcut: Ctrl+l
' This is an example to demonstrate LabVIEW's Active-X server capabilities.
' Executing this macro loads a LabVIEW supplied example VI "Frequency Response.vi",
' runs it and plots the result on an Excel Chart.
Dim lvapp As LabVIEW.Application
Dim vi As LabVIEW.VirtualInstrument
Dim paramNames(0)
Dim paramVals As Variant
Set lvapp = CreateObject("LabVIEW.Application")
viPath = lvapp.ApplicationDirectory + "\examples\apps\freqresp.llb\DAK Frequency Response.vi"
Set vi = lvapp.GetVIReference(viPath)   'Load the vi into memory
vi.FPWinOpen = True                     'Open front panel
paramNames(0) = "Foo"
paramVals = Sheet1.Range("j1:j1000").Value
Call vi.Call(paramNames, paramVals)
This code generates an error - expecting 1D array or variants.
However, if I supply the correct array, then LabView thinks it is empty
'foo' is a cluster
'Array' is a double array
Neither work to receive the data

Thanks for the reply but that approach will be difficult. The problem to solve is relatively simple IF LabView could read arrays (it writes arrays easily). Here is the problem:
I want to convolute two large arrays. I have written VBA programs to do this but they take too long - over 30 sec whereas the LabView version take <1 sec IF I could get the data into LabView.
The convolute is part of an optimization program that goes though many loops so that it takes hours to run efficiently AND if I manually change cells in the spreadsheet, then it takes 30sec to come back as VBA does not respect clean cells (for some reason).
I was trying to write a function in VBA to do this calculation via LabView rather than VBA. One way to do this is to write a text file in VBA and read in LabView, then pass the results back or maybe the clipboard as a buffer. That is faster but clumsy. You could also have LabView look for dirty cells and then do the calculation as the server rather than the client. Again, time consuming and cumbersome. I have written pure LabView code to do the curve fitting but prefer to use Excel as that is easier to incorporate and work with the data.   You can do convolute using FFTs but Excel does not do that correctly - they CANNOT make their FFTs into a function (VBA functions cannot modify cells in the spreadsheet but only return variables. FFT modifies cells so cannot be called from a function, only a macro, which then needs to be updated manually). Again, I can kluge VBA (real kluge this time) to make FFTs work as a function BUT prefer the LabView solution, if possible, as I am not sure the FFT will actually save time.
I am not sure if the problem is LabView's fault or Excel's (2013) fault that the variables are not set-up properly. LabView claims to be able to do this. Again, you can pass single variables into LabView and read back arrays but try as I might, I cannot get arrays into LabView.
Any help in sending arrays (maybe Labview expects a variant variable and needs to convert it somehow) would be appreciated. Variants are suppose to be able to be converted automatically but maybe there is a bug in LabView (2010) that does not handle input variant arrays correctly (I have tried making them clusters, double arrays, ect). LabView thinks that all the arrays sent by VBA are empty. If LabView modifies the same array, VBA sees that modification so that the addresses appear to be sent correctly i.e. the array "handle" is being sent to LabView or else it could not fill the array to send back to VBA.
If ever this is solved, I will put on-line the solution for others as again marrying both programs will have advantages. Others may find this interesting is marry LabView with Excel so that LabView does some of the heavy calculations that Excel has kluged.

[Load data from excel file [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messa

Error
[Load data from excel file [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There
may be error message
I am using BIDS Microsoft Visual Studio 2008 and running the package to load the data from excel .
My machine has 32 bit excel hence have set property to RUN64BITRUNTIME AS FALSE.
But the error still occurs .
I checked on Google and many have used Delay validation property at Data flow task level to true but even using it at both excel connection manager and DFT level it doesnt work
Mudassar

Thats my connection string
Provider=Microsoft.ACE.OLEDB.12.0;Data Source=E:\SrcData\Feeds\Utilization.xlsx;Extended Properties="Excel 12.0;HDR=NO";
Excel 2010 installed and its 32 bit edition
Are you referring to install this component -AccessDatabaseEngine_x64.exe?
http://www.microsoft.com/en-us/download/details.aspx?id=13255
Mudassar
You can try an OLEDB provider in that case
see
http://dataintegrity.wordpress.com/2009/10/16/xlsx/
you might need to download and install ms access redistributable
http://www.microsoft.com/en-in/download/details.aspx?id=13255
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Error while loading data from EXCEL to OWB

Hi Marcos,
Thank you. I got way.
I did in the following steps...
1. I created system dsn odbc_excel.
2. I created initSID.ora
3. I updated in the listener.ora.
4. I created a soure module in odbc in owb.
5. I created destination module in oracle where I want to load the data from excel.
6. I am able to get the metadata of excel.
7. I created a mapping.
8. Validation and Generation phases completed successfully.
9. At the time of deployment I got the following error.
ORA-06550: line 16, column 22:
PL/SQL: ORA-04052: error occurred when looking up remote object odbc_excel.EmployeeRange@EXCEL_SID.US.ORACLE.COM@CONNECTOR_EXCEL_OWB_SRC_DEST
ORA-00604: error occurred at recursive SQL level 1
ORA-02019: connection description for remote database not found
here
--excel_sid is the service name given in listener.ora.
--connector_excel_owb_src_dest is the connector from soruce to destination.
--Employee range is sheet name of excel.
I am fighting with this problem from past few days...
Thanks and regards
Gowtham
Message was edited by:
Gowtham Sen

Maybe you can consider save excel as .csv files and then you can load them as flatfiles to external table in OWB.

Loading data from excel to BPS layout

Hi,
I have BPS layouts in place and also excel sheets which are exact replica of those layouts.
I know 2 options to load excel data into the BPS. These are:
1) Copy and paste the data from excel to BPS layout.
2) Create a flat file in line format from excel and then use method explained in document "How to Load a Flat File into BW-BPS Using SAPGUI.pdf".
Is there any other way I can upload the same?
Any help in this regard will be highly appreciated.
thanks in advance.
regards,
Pankaj

Thanks to Vlad, Laurent & Srini for prompt replies.
But here the user needs to load data directly to the transactional cube.
So it is a case of "instead of keying in values" on to the BPS planning layout, user wants to upload the data from excel into the BPS layout.
Planning is done on SAP GUI and not web browser.
I am able to do the same using the document "How to Load a Flat File into BW-BPS Using SAPGUI".
But in this case the data needs to be converted into a simple csv file in line item format before it can be uploaded.
Is there any way, where we can upload from excel file without having it to change to csv format as required in "How to Load a Flat File into BW-BPS Using SAPGUI"?
thanks in advance.
regards,
Pankaj

How to create a data load file from Excel !!!

Hi All,
I'm new to HFM and would like to load data into an HFM application. As I have an Excel file with all the data. When I'm directly loading the data it throws an error saying "No section has been specified to determine if this is data, description or line item detail". How can I convert this excel file into proper format (.dat) file understandable by HFM ?

There are several ways to get this data into HFM.
1) FDM - best option if you have it
2) Webforms/Data Grids
3) HsSetValue formulas in Excel
4) DAT file loads
5) JVs, etc
If you wish to use DAT files created via Excel, you will likely want to use Excel VBA macros to create your DAT file to load. We do this on occasion for special projects and it works quite well. What you can do is set up an Excel file with your data inputs to look however you want, then link your POV members and amounts to another tab (we commonly call this the Export tab and it is set up in an HFM-friendly format).
Create a macro to write a DAT file to a specified location using data from the Export tab. The DAT file will need to be formatted as below. For a specific sample, you can extract data from your HFM app and see the format.
!Data
Scenario;Year;Period;View;Entity;Value;Account;ICP;Custom1;Custom2;Custom3;Custom4;Amount
Scenario;Year;Period;View;Entity;Value;Account;ICP;Custom1;Custom2;Custom3;Custom4;Amount
Scenario;Year;Period;View;Entity;Value;Account;ICP;Custom1;Custom2;Custom3;Custom4;Amount
Scenario;Year;Period;View;Entity;Value;Account;ICP;Custom1;Custom2;Custom3;Custom4;Amount
Scenario;Year;Period;View;Entity;Value;Account;ICP;Custom1;Custom2;Custom3;Custom4;Amount
Brush up on Replace, Merge, or Accumulate load options in the HFM Admin and User Guides, then upload your new DAT file.

Loading Data from Excel to Essbase through ODI 11G

Hi All,
i am getting below error when i click execute in ODI . In Excel Data store i had click reverse engineer its working fine
-3100 : 37000 : java.sql.SQLException: [Microsoft][ODBC Excel Driver] Syntax error (missing operator) in query expression '[Account]   C1_ACCOUNT''
java.sql.SQLException: [Microsoft][ODBC Excel Driver] Syntax error (missing operator) in query expression '[Account]    C1_ACCOUNT''
at sun.jdbc.odbc.JdbcOdbc.createSQLException(JdbcOdbc.java:6957)
at sun.jdbc.odbc.JdbcOdbc.standardError(JdbcOdbc.java:7114)
oracle.odi.core.datasource.dwgobject.support.OnConnectOnDisconnectDataSourceAdapter$OnDisconnectCommandExecutionHandler.invoke(OnConnectOnDisconnectDataSourceAdapter.java:200)
at $Proxy2.prepareStatement(Unknown Source)
Thanks

Hi,
after fixing the error with the PRE_LOAD_MAXL_SCRIPT parameter I right away figured out another problem.
On data load I get the following exception: java.sql.SQLException: Unexpected token: ACCOUNT in statement [select   C1_ACCOUNT    ""Account] ...
The SQL source and the Essbase target data store have the same columns, I have mapped them accordingly. As Staging area I use the Sunopsis Memory Engine. The exception is raised in Step '6 - Integration - SQL_TO_ESSBASE_DATA - Load data into essbase'.
I have also tried a File source instead of the SQL source - same result.
Any ideas?
Many thanks and best regards,
Peter

Need help loading data from Excel data file to oracle tables

i need to load an Excel spreadsheet to Oracle table.
The spreadsheet contains 20 columns, the first 8 columns contains basic info, but the rest 12 columns contains info like
1stQtr_08, 2ndQtr_08, 3rdQtr_08, 4thQtr_08
1stQtr_09, 2ndQtr_09, 3rdQtr_09, 4thQtr_09
1stQtr_10, 2ndQtr_10, 3rdQtr_10, 4thQtr_10
So what i need to accomplish is:
break that one record(with 20 fields) in Excel to 3 records for each fiscal year in the Oracle table, so each record in the database table will look like
8 basic field + fiscal_year + 1stQtr_08, 2ndQtr_08, 3rdQtr_08, 4thQtr_08
8 basic field + fiscal_year + 1stQtr_09, 2ndQtr_09, 3rdQtr_09, 4thQtr_09
8 basic field + fiscal_year + 1stQtr_10, 2ndQtr_10, 3rdQtr_10, 4thQtr_10
There are about 10000 rows in the data file, so how can i use sqlldr to perform such task? beside sqlldr, any other good suggestions?
thx

External Tables is just an Oracle API for sqlloader. If you going to load this data over and over again, External tables would be a good idea, but if it's a one time thing, sqlldir is simpler, unless you just want to learn how to use External Tables.
I used to run a data warehouse, so I have done, at least similar, to what you are doing in the past.

How to load the data from excel file into temprory table in Forms 11g?

Hi
How to Load the data from excel file(Extension is .CSV) into the temporary table of oracle in Forms11g.
My Forms Version is - Forms [64 Bit] Version 11.1.2.0.0 (Production)
Kindly Suggest the Solution.
Regards,
Sachin

Declare
    v_full_filename         varchar2(500);
    v_server_path           varchar2(2000);
    v_separator             VARCHAR2(1);
    v_filename              VARCHAR2(400);
    filename                VARCHAR2 (100);
    v_stop_load             varchar2 (2000);
    v_rec_error_log         varchar2(4000);
    v_error_log             varchar2(4000);
    ctr                     NUMBER (12);
    cols                    NUMBER (2);
    btn                     number;
    RES                     BOOLEAN;
    application             ole2.obj_type;
    workbooks               ole2.obj_type;
    workbook                ole2.obj_type;
    worksheets              ole2.obj_type;
    worksheet               ole2.obj_type;
    cell                    ole2.obj_type;
    cellType                ole2.OBJ_TYPE;
    args                    ole2.obj_type;
    PROCEDURE olearg
    IS
    args   ole2.obj_type;
    BEGIN
    args := ole2.create_arglist;
    ole2.add_arg (args, ctr);
    ole2.add_arg (args, cols);
    cell := ole2.get_obj_property (worksheet, 'Cells', args);
    ole2.destroy_arglist (args);
    END;
BEGIN
v_full_filename := client_get_file_name(directory_name => null
                                 ,file_name      => null
                                 ,file_filter    => 'Excel files (*.xls)|*.xls|'
                                                                        ||'Excel files (*.xlsx)|*.xlsx|'
                                 ,message        => 'Choose Excel file'
                                 ,dialog_type    => null
                                 ,select_file    => null
If v_full_filename is not null Then
v_separator := WEBUTIL_CLIENTINFO.Get_file_Separator ;
v_filename := v_separator||v_full_filename ;
:LOAD_FILE_NAME := substr(v_filename,instr(v_filename,v_separator,-1) + 1);
RES := Webutil_File_Transfer.Client_To_AS(v_full_filename,"server_path"||substr(v_filename,instr(v_filename,v_separator,-1) + 1));
--Begin load data from EXCEL
BEGIN
    filename := v_server_path||substr(v_filename,instr(v_filename,v_separator,-1) + 1); -- to pick the file
    application := ole2.create_obj ('Excel.Application');
    ole2.set_property (application, 'Visible', 'false');
    workbooks := ole2.get_obj_property (application, 'Workbooks');
    args := ole2.create_arglist;
    ole2.add_arg (args, filename); -- file path and name
    workbook := ole2.get_obj_property(workbooks,'Open',args);
    ole2.destroy_arglist (args);
    args := ole2.create_arglist;
    ole2.add_arg (args, 'Sheet1');
    worksheet := ole2.get_obj_property (workbook, 'Worksheets', args);
    ole2.destroy_arglist (args);
    ctr := 2;                                                     --row number
    cols := 1;                                                -- column number
    go_block('xxx');
    FIRST_RECORD;
    LOOP
            --Column 1 VALUE --------------------------------------------------------------------
        olearg;
        v_stop_load := ole2.get_char_property (cell, 'Text'); --cell value of the argument
        :item1 := v_stop_load;
        cols := cols + 1;
          --Column 2 VALUE --------------------------------------------------------------------
        olearg;
        :item2 := ole2.get_char_property (cell, 'Text'); --cell value of the argument
        cols := cols + 1;
        --<and so on>
    ole2.invoke (application, 'Quit');
    ole2.RELEASE_OBJ (cell);
    ole2.RELEASE_OBJ (worksheet);
    ole2.RELEASE_OBJ (worksheets);
    ole2.RELEASE_OBJ (workbook);
    ole2.RELEASE_OBJ (workbooks);
    ole2.RELEASE_OBJ (application);
END;
--End load data from EXCELPlease mark it as answered if you helped.

Loading hierarchies in BW from excel

Hi all ,
how to load hierarchies from excel into the BW .
do the excels need to be in .csv format or can they be loaded from .xls format.
do i need to have a specific format of the columns in excel as a pre-requisite for loading .
please also let me know all pre-requisites for format of excel.

Hi Neeraj,
the file needs to be in a special format and depends on the hierarchy of your infoobject, whether it is time-dependent or not. You can see the necessary file structure if you goto infosource, choose your hierarchy datasource. then you will find a button hierarchy structure. If you press it you will see a table with the expected columns. The file should be an csv file. You select it in the infopackage to your infosource. You can upload it directly from your desktop but only if you start the package immediately. The file must not be in use by anyone other, otherwise load fails. be careful if you number your nodes. the number must be unique
ue in the file. the node numbers are the keys for your infoobject or of infoobject 0HIERNODE for text nodes.
I'm looking for a sample file if you want.
Kind regards,
Juergen

How to read and write data from Excel to TestStand without using LabVIEW VIs

Hi,
How can I read in columns of data from Excel into a TestStand array and write columns of data to Excel from TestStand without using LabVIEW VIs?
I don't think the Property Loader custom step type in TestStand will work because the data I would like to read in from Excel is in a column that is thousands of rows long and the data has to be in the proper format to use the Property Loader to load in an array from Excel.
Thanks for your help.

That example does not use LabVIEW and it does about 40% of what you need to do by calling Excel through ActiveX. If you don't know how to use Excel through ActiveX then you'll need to brush up on that.
http://www.microsoft.com/en-us/download/details.aspx?id=16250
http://support.microsoft.com/kb/141759
http://support.microsoft.com/kb/302084
CTA, CLA, MTFBWY

Upload data from excel to snp livecach

Dear All.
I need to up load data from excel to snp. is their any bapi or function module.

Hello,
If you are using SCM 5.0 or above version you can load the data from Excel to SNP in two steps.
1. Load the data from excel to infocube with normal process.
2. Load the data from infocube to SNP by transaction /SAPAPO/REL_TO_SNP
Hope this helps.
Regards,
Prafulla

Upload data from excel with vba by calling a function module

Hello all,
i have a problem with the function module "ALSM_EXCEL_TO_INTERNAL_TABLE". I will call this function module with vba to load data from excel to sap with a Buttonclick. I have copied this function module and set it remotable. But i can´t call it from excel.
Can you give me some tips how can i
upload data from excel with vba by click a button.
The problem seems the function: call method cl_gui_frontend_services=>clipboard_import in the function module, because when i comment this function call the vba-call is true but no results.
How can I call the function module correct with vba?
Thanks a lot for your tips!!!!
Chris
Message was edited by:
        Christoph Kirschner

HI
Uploading data directly from Excel file format
* Upload data direct from excel.xls file to SAP
REPORT ZEXCELUPLOAD.
PARAMETERS: filename LIKE rlgrap-filename MEMORY ID M01,
            begcol TYPE i DEFAULT 1 NO-DISPLAY,
            begrow TYPE i DEFAULT 1 NO-DISPLAY,
            endcol TYPE i DEFAULT 100 NO-DISPLAY,
            endrow TYPE i DEFAULT 32000 NO-DISPLAY.
* Tick don't append header
PARAMETERS: kzheader AS CHECKBOX.
DATA: BEGIN OF intern OCCURS 0.
        INCLUDE STRUCTURE alsmex_tabline.
DATA: END OF intern.
DATA: BEGIN OF intern1 OCCURS 0.
        INCLUDE STRUCTURE alsmex_tabline.
DATA: END OF intern1.
DATA: BEGIN OF t_col OCCURS 0,
       col LIKE alsmex_tabline-col,
       size TYPE i.
DATA: END OF t_col.
DATA: zwlen TYPE i,
      zwlines TYPE i.
DATA: BEGIN OF fieldnames OCCURS 3,
        title(60),
        table(6),
        field(10),
        kz(1),
      END OF fieldnames.
* No of columns
DATA: BEGIN OF data_tab OCCURS 0,
       value_0001(50),
       value_0002(50),
       value_0003(50),
       value_0004(50),
       value_0005(50),
       value_0006(50),
       value_0007(50),
       value_0008(50),
       value_0009(50),
       value_0010(50),
       value_0011(50),
       value_0012(50),
       value_0013(50),
       value_0014(50),
       value_0015(50),
       value_0016(50),
       value_0017(50),
       value_0018(50),
       value_0019(50),
       value_0020(50),
       value_0021(50),
       value_0022(50),
       value_0023(50),
       value_0024(50),
       value_0025(50),
       value_0026(50),
       value_0027(50),
       value_0028(50),
       value_0029(50),
       value_0030(50),
       value_0031(50),
       value_0032(50),
       value_0033(50),
       value_0034(50),
       value_0035(50),
       value_0036(50),
       value_0037(50),
       value_0038(50),
       value_0039(50),
       value_0040(50),
       value_0041(50),
       value_0042(50),
       value_0043(50),
       value_0044(50),
       value_0045(50),
       value_0046(50),
       value_0047(50),
       value_0048(50),
       value_0049(50),
       value_0050(50),
       value_0051(50),
       value_0052(50),
       value_0053(50),
       value_0054(50),
       value_0055(50),
       value_0056(50),
       value_0057(50),
       value_0058(50),
       value_0059(50),
       value_0060(50),
       value_0061(50),
       value_0062(50),
       value_0063(50),
       value_0064(50),
       value_0065(50),
       value_0066(50),
       value_0067(50),
       value_0068(50),
       value_0069(50),
       value_0070(50),
       value_0071(50),
       value_0072(50),
       value_0073(50),
       value_0074(50),
       value_0075(50),
       value_0076(50),
       value_0077(50),
       value_0078(50),
       value_0079(50),
       value_0080(50),
       value_0081(50),
       value_0082(50),
       value_0083(50),
       value_0084(50),
       value_0085(50),
       value_0086(50),
       value_0087(50),
       value_0088(50),
       value_0089(50),
       value_0090(50),
       value_0091(50),
       value_0092(50),
       value_0093(50),
       value_0094(50),
       value_0095(50),
       value_0096(50),
       value_0097(50),
       value_0098(50),
       value_0099(50),
       value_0100(50).
DATA: END OF data_tab.
DATA: tind(4) TYPE n.
DATA: zwfeld(19).
FIELD-SYMBOLS: <fs1>.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR filename.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
       EXPORTING
            mask      = '*.xls'
            static    = 'X'
       CHANGING
            file_name = filename.
START-OF-SELECTION.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
       EXPORTING
            filename                = filename
            i_begin_col             = begcol
            i_begin_row             = begrow
            i_end_col               = endcol
            i_end_row               = endrow
       TABLES
            intern                  = intern
       EXCEPTIONS
            inconsistent_parameters = 1
            upload_ole              = 2
            OTHERS                  = 3.
IF sy-subrc <> 0.
    WRITE:/ 'Upload Error ', SY-SUBRC.
ENDIF.
END-OF-SELECTION.
LOOP AT intern.
    intern1 = intern.
    CLEAR intern1-row.
    APPEND intern1.
ENDLOOP.
SORT intern1 BY col.
LOOP AT intern1.
    AT NEW col.
      t_col-col = intern1-col.
      APPEND t_col.
    ENDAT.
    zwlen = strlen( intern1-value ).
    READ TABLE t_col WITH KEY col = intern1-col.
    IF sy-subrc EQ 0.
      IF zwlen > t_col-size.
        t_col-size = zwlen.
*                          Internal Table, Current Row Index
        MODIFY t_col INDEX sy-tabix.
      ENDIF.
    ENDIF.
ENDLOOP.
DESCRIBE TABLE t_col LINES zwlines.
SORT intern BY row col.
IF kzheader = 'X'.
    LOOP AT intern.
      fieldnames-title = intern-value.
      APPEND fieldnames.
      AT END OF row.
        EXIT.
      ENDAT.
    ENDLOOP.
ELSE.
    DO zwlines TIMES.
      WRITE sy-index TO fieldnames-title.
      APPEND fieldnames.
    ENDDO.
ENDIF.
SORT intern BY row col.
LOOP AT intern.
    IF kzheader = 'X'
    AND intern-row = 1.
      CONTINUE.
    ENDIF.
    tind = intern-col.
    CONCATENATE 'DATA_TAB-VALUE_' tind INTO zwfeld.
    ASSIGN (zwfeld) TO <fs1>.
    <fs1> = intern-value.
    AT END OF row.
      APPEND data_tab.
      CLEAR data_tab.
    ENDAT.
ENDLOOP.
CALL FUNCTION 'DISPLAY_BASIC_LIST'
       EXPORTING
            file_name     = filename
       TABLES
            data_tab      = data_tab
            fieldname_tab = fieldnames.
*-- End of Program
<b>Excel Upload Alternative - KCD_EXCEL_OLE_TO_INT_CONVERT</b>
*Title : Excel Uploading
TYPES:   BEGIN OF t_datatab,
         col1(25) TYPE c,
         col2(30) TYPE c,
         col3(30) TYPE c,
         col4(30) TYPE c,
         col5(30) TYPE c,
         col6(30) TYPE c,
         col7(30) TYPE c,
         col8(30) TYPE c,
         col9(30) TYPE c,
         col10(30) TYPE c,
         col11(30)    TYPE c,
       END OF t_datatab.
DATA: it_datatab TYPE STANDARD TABLE OF t_datatab INITIAL SIZE 0,
      wa_datatab TYPE t_datatab.
Data : p_table type t_datatab occurs 0 with header line.
DATA : gd_scol   TYPE i VALUE '1',
       gd_srow   TYPE i VALUE '1',
       gd_ecol   TYPE i VALUE '256',
       gd_erow   TYPE i VALUE '65536'.
DATA: it_tab TYPE filetable,
      gd_subrc TYPE i.
field-symbols : <fs>.
*Selection screen definition
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_file LIKE rlgrap-filename
               DEFAULT 'c:test.xls' OBLIGATORY.   " File Name
SELECTION-SCREEN END OF BLOCK b1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
REFRESH: it_tab.
CALL METHOD cl_gui_frontend_services=>file_open_dialog
    EXPORTING
      window_title     = 'Select File'
      default_filename = '*.xls'
      multiselection   = ' '
    CHANGING
      file_table       = it_tab
      rc               = gd_subrc.
LOOP AT it_tab INTO p_file.
*    so_fpath-sign = 'I'.
*    so_fpath-option = 'EQ'.
*    append so_fpath.
ENDLOOP.
START-OF-SELECTION.
PERFORM upload_excel_file TABLES   it_datatab
                             USING   p_file
                                     gd_scol
                                     gd_srow
                                     gd_ecol
                                     gd_erow.
* END-OF-SELECTION.
END-OF-SELECTION.
LOOP AT it_datatab INTO wa_datatab.
    WRITE:/ wa_datatab-col1,
            wa_datatab-col2,
            wa_datatab-col3,
            wa_datatab-col4,
            wa_datatab-col5,
            wa_datatab-col6,
            wa_datatab-col7,
            wa_datatab-col8,
            wa_datatab-col9,
            wa_datatab-col10,
            wa_datatab-col11.
ENDLOOP.
*&      Form UPLOAD_EXCEL_FILE
*       upload excel spreadsheet into internal table
*      -->P_TABLE    Table to return excel data into
*      -->P_FILE     file name and path
*      -->P_SCOL     start column
*      -->P_SROW     start row
*      -->P_ECOL     end column
*      -->P_EROW     end row
FORM upload_excel_file TABLES   p_table
                       USING    p_file
                                p_scol
                                p_srow
                                p_ecol
                                p_erow.
DATA : lt_intern TYPE kcde_cells OCCURS 0 WITH HEADER LINE.
* Has the following format:
*             Row number   | Colum Number   |   Value
*      i.e.     1                 1             Name1
*               2                 1             Joe
DATA : ld_index TYPE i.
* Note: Alternative function module - 'ALSM_EXCEL_TO_INTERNAL_TABLE'
CALL FUNCTION 'KCD_EXCEL_OLE_TO_INT_CONVERT'
    EXPORTING
      filename                = p_file
      i_begin_col             = p_scol
      i_begin_row             = p_srow
      i_end_col               = p_ecol
      i_end_row               = p_erow
    TABLES
      intern                  = LT_INTERN
    EXCEPTIONS
      inconsistent_parameters = 1
      upload_ole              = 2
      OTHERS                  = 3.
IF sy-subrc <> 0.
    FORMAT COLOR COL_BACKGROUND INTENSIFIED.
    WRITE:/ 'Error Uploading file'.
    EXIT.
ENDIF.
IF lt_intern[] IS INITIAL.
    FORMAT COLOR COL_BACKGROUND INTENSIFIED.
    WRITE:/ 'No Data Uploaded'.
    EXIT.
ELSE.
    SORT lt_intern BY row col.
    LOOP AT lt_intern.
     MOVE lt_intern-col TO ld_index.
     assign component ld_index of structure
     p_table to <fs>.
move : lt_intern-value to <fs>.
*     MOVE lt_intern-value TO p_table.
      AT END OF row.
        APPEND p_table.
        CLEAR p_table.
      ENDAT.
    ENDLOOP.
ENDIF.
ENDFORM.                    "UPLOAD_EXCEL_FILE
Regards
Pavan

How to load data from a flat file to two different tables at a time.

I am not aware of Sql Loader so Please any body suggest me that is there any way to load data from excel sheet to two different tables at a time its very urgent.
with regards,
Srinivas.R

Read Utilities Guide from the Oracle Documentation Library. See
<br>
Oracle Database FAQs
</br>

Moving contacts from excel to cellolar

Hello,
I have a new nokia 6120. I saved the contact names of my old phone in excel file. I want to update the contacts from the excel to the new phone. I tried using the nokia pc suite but I couldn’t find the option of loading contacts from excel.
Is it possible?
Please Advice
Amir

Whilst in outlook go to:
import & export > import from another program or file > comma separated value file (windows) > Next and then browse for your file and follow through the prompts.
There is also an option to import from excel, this may work better.
It won't work if your data is incorrectly formatted, i'm not an expert on this so you will have to give google a try.

Speeding Up Load Array From Excel subVI

Similar Messages

Maybe you are looking for