Spend Performance Management - Issues with OPM_SOURCES entries

Hello,
We have replicated and activated our datasources after installing them at the ECC side. However, there are no entries created in the OPM_SOURCES table. Is there a manual mean to create those entries. What else can we do to trouble shoot this?
Also, will the above step be a bottleneck in loading data from the UI?

Hi there:
Have you applied any SAP Note to solve your problem? Please check if any of the SAP Notes below is applicable to your system.
1327125 - "Correction of a DataManagement issue for DataSources"
1353216 - "Errors occur when configuring datasources"
1418424 - "Changes to table OPM_SOURCES not possible with some settings"
Regards,
Francisco Milán.

Similar Messages

  • Spend Performance Management - Quick link

    Hi All,
    Am unable to delete quick link in Spend Performance Management post upgrade(from 2.0 to 3.0). When clicked delete option in Administration -> Quick Links Configuration, the link is getting populated once again after refreshing the page.
    Please help if the quick link needs to be deleted from any other location.
    Thanks,
    Preetha Balan

    Hi Preetha,
    I tested this again in my lab. I was able to delete the links from the UI. (It surprised me by taking effect right away.) I logged out/in and my changes persisted as expected.
    If the process using OK/SAVE is not working for you – I would have to guess a good place to start is by reviewing authorizations. I would go so far as to assign the user all five standard SPM roles, if that user can do it then it is an authorization issue.
    Here are the five SPM roles by name:
    SAP_SPM_TRANSPORT
    SAP_SPM_USER
    SAP_SPM_ADMINISTRATOR
    SAP_XSA_DATA_MANAGER
    SAP_XA_SS_OWNER
    See Chapter five in the security guide for more details.
    Kind Regards,
    John Harris
    Senior Support Engineer, SAP Active Global Support,
    SAP America, Inc., 1001 Summit Blvd, #2100, Atlanta, GA 30319, USA

  • Spend Performance Management

    Hi,
    In spend performance management we have inbound layer, outbound layer, Reporting layer and multiprovider.
    Tha data is passing from one layer to another layer i.e inbound to outbound like...
    But here my question is where is the data coming from and updated in Inbound layer...
    In, Inbound layer consists of all DSO.
    Regards
    KS

    Just to add to to Rohit's Response. As he mentioned, data into Inbound layer is via Direct Update  when you trigger data load from SPM UI there are a bunch of API's that run in the background and get data nd update the Inbound DSO's.
    Next would be moving Data to Detail layer. We do something called as SEND Process in SPM UI and that generates E files in the application server. Then we load these E Files ( Raw Data Files - Out of Inbound DSO's ) , we do Data Standardization and Enrichment basically Data Cleansing of E files and then load these E flles back and thats when we move the data into detail layer DSO's.
    Next would be reporting layer , here we move data from Detail DSO to Cubes using the process of release to reporting and thats when Data Classification happens and this would also ensure that data is available for reporting .
    @ Rohit correct me if I am wrong.
    Hope this helps.
    Thanks
    Manjunath B Patil

  • Colour Management Issue with PS CS3 and Leopard 10.5.2

    Hi Everyone,
    Since I have installed Leopard I am having colour management issues with Photoshop CS3 and my Canon i9950 printer.
    My screen is calibrated with a Spyder and I used to ask Photoshop (in 10.4.11) to manage colour when printing and used the Spyder profile. Everything came out as I saw it on screen.
    Now in leopard when I do the same thing everything comes out too yellow on the print. If I ask Photoshop to let the printer manage the colour it is too red. If I use the default colour management (photoshop managing the colour and it choosing the colour space it is better, but still too yellow).
    Photoshop gives the hint to turn off colour management in the printer but there is no option for this and it also said the same thing before of course (when it worked in 10.4.11).
    Any ideas?
    Thanks.

    >It was working perfectly in Tiger with the monitor profile.
    You were lucky.
    the monitor profile is so Photoshop can display your images correctly.
    the working space is Adobe RGB, sRGB, BruceRGB, ect... these are all known color spaces so when the file goes to another computer there is a consistent color space for reference. If you use your monitor profile as a working space then nobody else knows what is going on with your file.
    when you print you need to use the printer profile for the type of paper you are printing on this is supplied by the printer manufacturer. you can also have custom profiles made.
    you need to read up on color management:
    http://www.gballard.net/psd.html
    http://digitaldog.net/

  • Colour Management issue With Leopard and PS CS3

    Hi Everyone,
    Since I have installed Leopard I am having colour management issues with Photoshop CS3 and my Canon i9950 printer.
    My screen is calibrated with a Spyder and I used to ask Photoshop (in 10.4.11) to manage colour when printing and used the Spyder profile. Everything came out as I saw it on screen.
    Now in leopard when I do the same thing everything comes out too yellow on the print. If I ask Photoshop to let the printer manage the colour it is too red. If I use the default colour management (photoshop managing the colour and it choosing the colour space it is better, but still too yellow).
    Photoshop gives the hint to turn off colour management in the printer but there is no option for this and it also said the same thing before of course (when it worked in 10.4.11).
    Any ideas?
    Thanks.

    You need to use the correct printer profile for the paper you're using. If the printer didn't come with any pre-built profiles, check Canon's web site to see if they have any profiles available for your printer that you can download.
    Printer profiles are very specific. You can't take take a profile for glossy Epson paper and expect it to work very well for Canon glossy paper.

  • Colour Management Issues with Leopard and Photoshop CS3

    Hi Everyone,
    Since I have installed Leopard I am having colour management issues with Photoshop CS3 and my Canon i9950 printer.
    My screen is calibrated with a Spyder and I used to ask Photoshop (in 10.4.11) to manage colour when printing and used the Spyder profile. Everything came out as I saw it on screen.
    Now in leopard when I do the same thing everything comes out too yellow on the print. If I ask Photoshop to let the printer manage the colour it is too red. If I use the default colour management (photoshop managing the colour and it choosing the colour space it is better, but still too yellow).
    Photoshop gives the hint to turn off colour management in the printer but there is no option for this and it also said the same thing before of course (when it worked in 10.4.11).
    Any ideas?
    Thanks.

    I'm having exactly the same problem, only my printer is a Canon Pixma iX4000. The colour is all bleached out, it looks exactly like when you've accidentally printed an RGB file on a CMYK printer, and at first I thought that was what I had done, but it isn't. This is very frustrating, I've spent all day going through the manuals, recalibrating etc, but no luck. This is a brand new Mac Pro and printer, but if its not going to print what I see on screen it's just expensive junk.
    I wasn't sure if the problem was Leopard or the printer or CS3...

  • Performance Management: 'Share with Main Appraiser' button not visible

    Hi Gurus,
    I am using Oracle R12.1.3, Performance Management module.
    I am trying to publish Performance Management Plan with Objective setting and Appraisals both tasks. Appraisal plan is set to be appraisee initiated, standard appraisal
    However - When the appraisee is trying to initiate the appraisal (by clicking 'Update' on the appraisal task appeared) - s/he sees all the objectives set and get to choose a performance rating. However - the button 'Share with Main Appraiser' button is not visible.
    When I am trying to create a Performance Management Plan with only 'Appraisals' - this problem is not occurring. Any clue as to how to rectify this problem?
    PS - I have tried disabling personalizations and re-tried several times - but the same error occurs.
    Would really appreciate any response which might help.
    Thanks and Regards,
    Rahul

    I'm thankful for your effort Hussein. However, this document is applicable for version 12.1.4+ while I am working on 12.1.3. I re-tested the thing after making some changes in appraisal template where I ticked 'Update Appraisals for Terminated Workers' and also checking 2 more related check-boxes. Surprisingly it worked.
    Also if I am selecting method for objective allocation as 'Parallel' - then also this error is not occurring - even with old appraisal template. Although this hit and trial worked, I do not have a logical view about the solution and correctness in all environments yet.

  • Flat Data Load in Spend Performance Management

    Dear All,
    We have a new Project, wherein Data from Various Flat Files (Flat Files from Multiple Non SAP Source Systems), needs to be loaded in SPM. We are new to SPM, any step by step documentation for loading Flat Files into SPM using Data Management Tool, will be really helpful.
    Regards
    Pankaj

    Hi Pankaj,
    These are the basic steps
    1) Determine table and fields you going to load.
    2) create file
    3) upload file to folder
    4) move through steps in user interface.
    This topic is covered in the Master Guide section 3.1Data Management. You can download all of our docs here:
    SAP BusinessObjects Spend Performance Management 3.0 – SAP Help Portal Page
    These notes also have good details:
    1796459 - Sequence for loading data in SPM
    1891572 - SPM Data Model and Tables
    1775340 - The key steps for loading supplier diversity file
    1914255 - How to enable delta for SPM data load     
    and of course these also for :
    1239883 - Extractor Starter Kit for Spend Performance Management(SPM)
    1679583 - Enhanced PO Extractor for Spend Performance Management
    1358507 - SSA extractors: Contracts and Sch Agr Performance
    * For more information about details of the delivery process
    and environment, see Data Management in the see SAP Library for SAP Library for
    SAP Spend Analytics.
    * For more information about the data model, see the Analysis
    Scenario SAP BusinessObjects Spend Performance Management – Data Model and Data
    Flow in SAP NetWeaver BW in SAP Library
    at
    SAP BusinessObjects Spend Performance Management 3.0 – SAP Help Portal Page
    Kind Regards,
    John Harris
    Senior Support Engineer, SAP Active Global Support,
    SAP America, Inc., 1001 Summit Blvd, #2100, Atlanta, GA 30319, USA

  • Color Management issues with Illustrator

    Can someone help me figure out the color management issues I'm getting when printing on an Epson 3880 from Illustrator?
    The image comes out severely red as evident on the face. I'm not getting the same problem when printing from Photoshop, even though I set same paper profile in printing dialog box.
    I attached two printed picture (one from Photoshop CC, and one from Illustrator CC) that I took with my iphone so that you can see the printed result.  Even when I try to simulate same thing using illustrator soft proofing process, the soft proof does not show me anything close to how it gets printed out. And I tried all device simulations to see if any would match it. Im using  CMYK SWOP v2 for Color space in both programs.

    Dougfly,
    Only an hour wasted? Lucky you. Color is an incredibly complex subject. First, forget matching anything to the small LCD on the back of your camera. That's there as a basic guide and is affected by the internal jpg algorithm of your camera.
    2nd, you're not really takeing a color photo with your digital camera, but three separate B&W images in a mosaic pattern, exposed thru separate red, green and blue filters. Actual color doesn't happen until that matrix is demosaiced in either your raw converter, or the in-camera processor (which relies heavily on camera settings, saturation, contrast, mode, etc.)
    Having said the above, you can still get very good, predictable results in your workflow. I have a few color management articles on my website that you might find very helpful. Check out the Introduction to Color Management and Monitor and Printer Profiling. In my opinion, a monitor calibration device is the minimum entry fee if you want decent color.
    http://www.dinagraphics.com/color_management.php
    Lou

  • Color management issues with Flash CS3, please help?

    Hello everyone.
    I am having issues with color from a Jpeg image produced in Photoshop CS4
    after importing onto the stage in Flash CS3. The color in Flash changes the image to a lighter less saturated state. Yuk.
    Here is a link to a screen capture to show you what's happening (for a bigger view):
    http://www.rudytorres.com/color/weirdcolor.png
    As you can see the front image is the Photoshop image showing the sRGB color profile embedded but Flash (behind) changes that color.
    This client is quite picky and she will notice this difference.
    If any one can help, please.
    - Rudy
    P.S. It's a button somewhere, Right?

    Dougfly,
    Only an hour wasted? Lucky you. Color is an incredibly complex subject. First, forget matching anything to the small LCD on the back of your camera. That's there as a basic guide and is affected by the internal jpg algorithm of your camera.
    2nd, you're not really takeing a color photo with your digital camera, but three separate B&W images in a mosaic pattern, exposed thru separate red, green and blue filters. Actual color doesn't happen until that matrix is demosaiced in either your raw converter, or the in-camera processor (which relies heavily on camera settings, saturation, contrast, mode, etc.)
    Having said the above, you can still get very good, predictable results in your workflow. I have a few color management articles on my website that you might find very helpful. Check out the Introduction to Color Management and Monitor and Printer Profiling. In my opinion, a monitor calibration device is the minimum entry fee if you want decent color.
    http://www.dinagraphics.com/color_management.php
    Lou

  • Spend Performance Management  Fatal error.

    I installed Spend Performence Management 2.1 in BI 7.01 server
    When I starting the Spend analysis, I am getting the following error.
    APPL_TYPE    FATAL
    SPEND_ANALYTICS_STARTUP_FAILED]
    Details
    [SPEND_ANALYTICS_STARTUP_FAILED]
    Can anyone help me to solve this error.
    Thank you very much in advance.
    Regards,
    Amar.
    Edited by: Sukripa Roy on May 23, 2011 1:53 PM

    Hello Experts,
    I am getting the same error, I have NW 7.0 with EHP1 so I deployed SSAUI 211, as in above reply the issue resolved.
    Any Idea what is the Issue? I checked all the Associated Services they are working fine.
    Error:
    #1#com.sapportals.portal.prt.runtime.PortalRuntimeException: iView not found: xapps.analytics.ds_par.core
            at com.sapportals.portal.prt.deployment.DeploymentManager.getPropertyContentProvider(DeploymentManager.java:1937)
            at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.refresh(PortalComponentContextItem.java:222)
            at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.getContext(PortalComponentContextItem.java:316)
            at com.sapportals.portal.prt.component.PortalComponentRequest.getComponentContext(PortalComponentRequest.java:387)
            at com.sapportals.portal.prt.connection.PortalRequest.getRootContext(PortalRequest.java:488)
            at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:607)
            at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:235)
            at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:541)
            at java.security.AccessController.doPrivileged(Native Method)
            at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:430)
            at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
            at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
            at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
            at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
            at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
            at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
            at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
            at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
            at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
            at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
            at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
            at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
            at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
            at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
            at java.security.AccessController.doPrivileged(Native Method)
            at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
            at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)

  • Business Contact Manager issue with New Users

    I have an issue with a client when setting up Business Contact Manager for Outlook 2013. The client recently got a new employee and the employee was setup on an existing workstation that has BCM installed. When I launched Outlook 2013, and configured Oultook for
    the new user, BCM started and needed to be configured. I went through the procedure for connecting to a 'Remote Database' on the server, typed in the server name as requested, and clicked Continue. BCM searched for the database but could not find it. The existing
    user account on the workstation works just fine with BCM, and sees the remote database.
    My next step was to remove BCM and re-install. This is the latest version/release of BCM for Outlook 2013. The existing user account was able to configure BCM with no issues, and found the remote database without an issue. The new user account had the same
    issue as before and would not find the remote database.
    I logged onto the same workstation as the administrator account we use to perform Admin tasks. I launched Outlook, configured Outlook 2013, and was able to successfully configure BCM and connect to the remote database with no issues.
    I then created another New User on the server called Testaccount (TAccount), and logged onto the same workstation again, as this new user, and went through the same Outlook 2013 configuration and BCM setup. BCM has the same issue with this new user, and
    cannot locate the remote database. From what I can determine, this looks to be something related to New Users that are created on the server and BCM not locating the remote database. Existing users do not have this issue when configuring BCM and connecting
    to the remote database.
    Has anyone had this issue or seen this issue and knows of a fix to correct this so my client can use BCM with the new user account, and any future new users they hire?
    Thank you in advance for any assistance on this matter.

    If you want to sync subfolders then you will need third party software. (Like Pocket Mirror)
    Post relates to: None

  • Flex Table Add Row Issue with Dynamic Entry Lists in Visual Composer

    All,
    Your help would be kindly appreciated in resolving an 'Add Row'-issue within a Flex Table that uses Dynamic Entry Lists in Visual Composer. The issue here is as follows :
    When I use a [Local Dynamic Entry List |http://www.postyourimage.com/view_image.php?img_id=O5hrG2aMxWZ84Mu1211193041]to populate a row field, the initial row and all next rows are emptied upon 'insert row', they loose their selected values and also the entry list values ('pull-down menus') are lost. Please also see [screenshot|http://www.postyourimage.com/view_image.php?img_id=FPLr2cABcgiHRou1211192889].
    The initial row does [show the entry list values |http://www.postyourimage.com/view_image.php?img_id=2HybmEHAuQYs9cg1211192766]from the Local Dynamic Entry List based on the dynamically assigned input value; upon 'insert row' the entry lists are lost. Please also see [screenshot|http://www.postyourimage.com/view_image.php?img_id=FPLr2cABcgiHRou1211192889].
    When using a [Global Dynamic Entry List |http://www.postyourimage.com/view_image.php?img_id=m5p2KYuBb442dTq1211193501]to populate the row fields the Flex-table behaves normally as expected. Unfortunately with a Global Entry List it is not possible to dynamically assign a input value. Please also see [screenshot|http://www.postyourimage.com/view_image.php?img_id=U96V0zENCCyO3gA1211193157].
    Please also see the [issue summary image|http://www.postyourimage.com/view_image.php?img_id=06xti08tIEfely1211195178] I made to visualize the issue.  What I basically would like to know is whether this is a 'known issue' or not, or that it is an issue that can be fixed or whether there is an alternative workaround available ... I'm using Visual Composer 7.0 and the Portal is at SP 13.
    Many thanks,
    Freek

    Hi,
    you should be able to assign a dynamic value with global entry lists as well. If you say @myParam as dynamic value. VC will indicate in red letters, that the field @myParam is unknown. However, it will work, as long as @myParam is known in the form or table where you use the entry list.
    I have never heard of the problem that entry lists are emptied after "insert"-event.
    Kindes Regards,
    Benni

  • Issue with Variable Entry in BI 7.0

    Hi,
    I am having an issue with the variable entry in BI 7.0 Version. Here is a brief background.
    --- In BW 3.x, when we define a variable with <b>Single Value Option</b>, you can enter the value manually in the pop-up selection screen or select from the dropdown of possible values.
    ---But in 7.0 when i try to enter the value manually in the selection screen its opening the dropdown list, and is not giving me the option to enter a value manually. I am entering a valid single value in selection.
    Is this a bug or do i have to make any specific settings to correct my issue?

    When the selection screen pops up choose the KEY only function on the TOOLS on the top right corner of the screen. Then you will be able to enter the values manually.
    Hope this helps.

  • Flex Table Add Row Issue with Dynamic Entry Lists

    All,
    Your help would be kindly appreciated in resolving an 'Add Row'-issue within a Flex Table that uses Dynamic Entry Lists in Visual Composer. The issue here is as follows :
    When I use a [Local Dynamic Entry List |http://www.postyourimage.com/view_image.php?img_id=O5hrG2aMxWZ84Mu1211193041]to populate a row field, the initial row and all next rows are emptied upon 'insert row', they loose their selected values and also the entry list values ('pull-down menus') are lost. Please also see [screenshot|http://www.postyourimage.com/view_image.php?img_id=FPLr2cABcgiHRou1211192889].
    The initial row does [show the entry list values |http://www.postyourimage.com/view_image.php?img_id=2HybmEHAuQYs9cg1211192766]from the Local Dynamic Entry List based on the dynamically assigned input value; upon 'insert row' the entry lists are lost. Please also see [screenshot|http://www.postyourimage.com/view_image.php?img_id=FPLr2cABcgiHRou1211192889].
    When using a [Global Dynamic Entry List |http://www.postyourimage.com/view_image.php?img_id=m5p2KYuBb442dTq1211193501]to populate the row fields the Flex-table behaves normally as expected. Unfortunately with a Global Entry List it is not possible to dynamically assign a input value. Please also see [screenshot|http://www.postyourimage.com/view_image.php?img_id=U96V0zENCCyO3gA1211193157].
    Please also see the [issue summary image|http://www.postyourimage.com/view_image.php?img_id=06xti08tIEfely1211195178] I made to visualize the issue.  What I basically would like to know is whether this is a 'known issue' or not, or that it is an issue that can be fixed or whether there is an alternative workaround available ... I'm using Visual Composer 7.0 and the Portal is at SP 13.
    Many thanks,
    Freek

    Hi,
    you should be able to assign a dynamic value with global entry lists as well. If you say @myParam as dynamic value. VC will indicate in red letters, that the field @myParam is unknown. However, it will work, as long as @myParam is known in the form or table where you use the entry list.
    I have never heard of the problem that entry lists are emptied after "insert"-event.
    Kindes Regards,
    Benni

Maybe you are looking for