Split file into multiple Instance of an IDoc .

My file (only one file) in the file system contains multiple entities(lets say sales order).Now using File adapter I want to transfer this file into XI and want XI to create multiple instance of an IDoc(for each sales order) and send them to the target system one by one.
Alternatively can I split the file into multiple entities(sales order) in the file adapter (using dispatcher for e.g) and send multiple message to the configured XI automatically.
Is any of the alternative possible in XI20.
Any responce would be highly appreciated.
Regards,
Bikky.

Hi,
You can get the file adapter to split the file without the need for a dispatcher user exit. The config goes a little like this:
mode=FILE2XMBWITHSTRUCTURECONVERSION
xml.recordsetStructure=SALES_ORDER,1
xml.recordsetsPerMessage=1
This last parameter ensures each sales order is posted to the integration engine as a separate message. Therefore a separate Idoc is created for each.
Hope this helps.
Jason

Similar Messages

Adapter file sender doesn't split file into multiple message

Hi everybody.
We are in PI 7.0 SP10.
In adapter file sender, I want to split a file into multiple file.
We use protocole "file content conversion"
in the field "recordset per message", I put the value 10 to test.
The file content 30 records .
The result we have is the treatment is not split into multiple message .
The treatment is made but with one message.
I need to treat big files.
Is there some one who have an idea why t doesn't work ?
Thanks in advance for your help.
Regards
Edited by: Eric KOralewski on Jun 25, 2009 3:14 PM

Hi,
have you specified recordset name......if not, then specify it.............
in recordset structure, specify like RECORD,1 and not RECORD,*
again test your scenario......if still your file data is not getting split, then ask your basis guys to do a full CPACache refresh using PIDIRUSER..........your basis guys will know how to do it..........then again test your scneario............
Regards,
Rajeev Gupta

How to split large video files into multiple individual clips by date

Hello. I'm looking for a freeware/shareware program (if one exists, or willing to pay for one if it does this well) that will:
1) Analyze a large AVI file identifying the start/start points of each segment of video and the dates the video segments were shot.
2) Then allow me to organize (for example, join 2 or more segments together if it's a video with a lot of start/stop points during the same shot) the segments identified in step 1 into logical clips that could be split apart from the 1 large AVI file.
3) Lastly, it would split my one large AVI file into the multiple clips or files that I identified in step 2.
A piece of software called FootTrack does a great job analyzing AVI files as I describe in steps 1 & 2, but it doesn't allow you to split or export the one avi file into multiple avi files.
I really don't want to have to do this one clip at a time, I've got to believe there's a program out there that will automate this process for me.
Thanks

I don't know of a way to automate it. I just did about 15 years worth. It wasn't too hard. I use an application called mpegstreamclip. Its very easy and free to download either from the apple site or direct from its site.
http://www.squared5.com/
Bascically you set the in and out points with the i and o keys and export.

C# Split xml file into multiple files

Below i have an xml file, in this file, i need to split this xml file into multiple xml files based on date column value,
suppose i have 10 records with 3 different dates then all unique date records should go into each file . for ex here i have a file with three dates my output should get 3 files while each file containing all records of unique date data. I didn't get any idea
to proceed on this, thats the reason am not posting any code.Needed urgently please
<XML>
<rootNode>
<childnode>
<date>2012-12-01</date>
<name>SSS</name>
</childnode>
<childnode>
<date>2012-12-01</date>
<name>SSS</name>
</childnode>
<childnode>
<date>2012-12-02</date>
<name>SSS</name>
</childnode>
<childnode>
<date>2012-12-03</date>
<name>SSS</name>
</childnode>
</rootNode>
</XML>

Here is full code:
using System.Xml.Linq;
class curEntity
public DateTime Date;
public string Name;
public curEntity(DateTime _Date, string _Name)
Date = _Date;
Name = _Name;
static void Main(string[] args)
XElement xmlTree = new XElement("XML",
new XElement("rootNode",
new XElement("childnode",
new XElement("date"),
new XElement("name")
string InfilePath = @"C:\temp\1.xml";
string OutFilePath = @"C:\temp\1_";
XDocument xmlDoc = XDocument.Load(InfilePath);
List<curEntity> lst = xmlDoc.Element("XML").Element("rootNode").Elements("childnode")
.Select(element => new curEntity(Convert.ToDateTime(element.Element("date").Value), element.Element("name").Value))
.ToList();
var unique = lst.GroupBy(i => i.Date).Select(i => i.Key);
foreach (DateTime dt in unique)
List<curEntity> CurEntities = lst.FindAll(x => x.Date == dt);
XElement outXML = new XElement("XML",
new XElement("rootNode")
foreach(curEntity ce in CurEntities)
outXML.Element("rootNode").Add(new XElement("childnode",
new XElement("date", ce.Date.ToString("yyyy-MM-dd")),
new XElement("name", ce.Name)
outXML.Save(OutFilePath + dt.ToString("yyyy-MM-dd") + ".xml");
Console.WriteLine("Done");
Console.ReadKey();

HT201066 How can I split a long recording audio file into multiple audio files?

Hi,
How can I split a long recording audio file into multiple audio files?
With Windows I was using Nero software, which is not available for Mac. Is there any similar app for free for Mac?
Thanks!

Hello ingiorgio
You can import the track into GarageBand and then split the tracks there. Once that it is done you can highlight the ruler section and then share the song to iTunes to get them separated out.
GarageBand - Split regions in the Tracks area
http://help.apple.com/garageband/mac/10.0/#gbnd76fcce04
GarageBand - Share songs to iTunes
http://help.apple.com/garageband/mac/10.0/#gbndfb96a96f
Regards,
-Norm G.

Split MP3 file into multiple MP3 files

I've been through the help section and is till cant seem to figure out how to split a large (2 hour) mp3 file into multiple mp3 files.
I have a 2 hour MP3 recording (Stereo not mono), and I have added markers (by simply pressing keyboard shortcut 'M' to add marker), but now I would like to know how to split that one mp3 files into multiple files from the markers which I have made...
All my marker types are "Cue" when i pressed 'M' at the locations I want the track to end/start

You didn't say which version of the program you're using, but in general, there is a way to do this by adding one additional cue at the very end of the file, then "merging" the cues (which converts the space between each cue into a "range"), and batch processing each range out to a separate file. (Make sure there's a cue at the beginning of the file, or at least the first material you want in a new file.)
Now that you've done all that work, I'm going to tell you that what you're doing is probably a bad idea. Opening any mp3 in Audition and resaving back to mp3 means you've doubled the losses and distortion inherent with the mp3 compression. Audition can't do lossless editing of mp3s. The bottom line: are you really splitting the file, and does the result have to be mp3 format? If saving to a (wave file, or any other lossless format, then what I'm saying doesn't matter.
In any case, "mp3 Direct Cut" is a terrific freeware program that does lossless mp3 editing, and I'd highly recommend you try it. It's saved my neck a number of times. See http://www.mpesch3.de.

Splitting TempDB into multiple data files.

To avoid contention we have to split tempdb into multiple data files. But as for case suppose, there is 20 GB total space is on the drive containing 1 tempdb data file of 15 GB. And I have to create 3 more tempdb data files, and as recommendation all files
should be of same size.Then how to handle this situation and configure all data files with same size?
Pranshul Gupta

But as for case suppose, there is 20 GB total space is on the drive containing 1 tempdb data file of 15 GB. And I have to create 3 more tempdb data files, and as recommendation all files should be of same size.Then how to handle this situation and configure
all data files with same size?
So your goal is to have 4 tempdb files, each 5GB? Below is a sample script to accomplish the task within the 20GB space constraint.
--reduce size of existing file to 5GB
ALTER DATABASE tempdb
MODIFY FILE (NAME='tempdev', Size=5GB);
DBCC SHRINKFILE('tempdev',5120);
--add 3 new 5GB files
ALTER DATABASE tempdb
ADD FILE (NAME='tempdev2', FILENAME='D:\SqlDataFiles\tempdb2.ndf', Size=5GB);
ALTER DATABASE tempdb
ADD FILE (NAME='tempdev3', FILENAME='D:\SqlDataFiles\tempdb3.ndf', Size=5GB);
ALTER DATABASE tempdb
ADD FILE (NAME='tempdev4', FILENAME='D:\SqlDataFiles\tempdb4.ndf', Size=5GB);
Dan Guzman, SQL Server MVP, http://www.dbdelta.com

Split TempDB Data file into multiple files

Hey ,
I have been seeing TempDB contention in memory on our SQL server 2012 Enterprise Edition with SP2 and I need to split TempDB Data file into multiple files .
Could someone please help me to verify the following information:
1]
We are on SQL server 2012 Enterprise Edition with service pack2 but as per SQL Server 2012 Enterprise Edition under CAL Licensing –We are limited to use 20 logical processors instead 40 logical processors. Our SQL is configured
on NUMA nodes and with the limitation SQL uses only 2 NUMA nodes on live .There are 10 logical CPUs are evenly assigned to each NUMA nodes. Microsoft recommends that if SQL server configured on NUMA node and we have 2 NUMA nodes, then we may add two data files
at a time. Please let me know should I add two TempDB data file at a time?
2] We have TempDB Data and log files both on the same Drive of SQL server .When I split TempDB into two Data files, I can get them on the same Drive .What your recommendation should I need to create TempDB Data files on the same drive or on separate
disks?
3] What would be the blackout plan for splitting the tempdb into multiple files? Please let me know if someone has a better back out plan ?
1] Run script that create tempdb Database with a single file
2] Reboot SQL service in order to apply change
Your help will be apprecited .
Thanks ,
Daizy

Tom , I am seeing TempDB contention on Production server when there is a heavily load on sql server . We also experiencing the overall system slowness.Please look at Pagelatch wait statistics on our server ,Please advise .
wait_type
waiting_tasks_count
wait_time_ms
max_wait_time_ms
signal_wait_time_ms
PAGELATCH_UP
2680948
3609142
10500
508214
PAGELATCH_SH
1142213
1338451
8609
324538
PAGELATCH_NL
0
0
0
0
PAGELATCH_KP
0
0
0
0
PAGELATCH_EX
44852435
7798192
9886
6108374
PAGELATCH_DT
0
0
0
0
Thanks ,
Daizy

What is the simplest way to split an mp3 file into multiple audio CDs?

I wonder if windows 7 has any tools to burn an mp3 file into multiple audio CDs.
If it does not, are there any standard tools to do it?
thank you,
Ed

see this to understand how you can loop through sheets
http://www.codeproject.com/Tips/395541/How-to-load-data-from-multiple-Excel-sheets-to-any
then all it needs is a data flow task with excel source and flat file destination which will point to your csv path
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Collect data from a dynamic XML file into multiple internal tables

I need to convert the XML file into multiple internal tables. I tried many links and posts in SDN but still was facing difficulty in achieving this. Can some one tell me where I am going wrong.
My XML file is of the following type.It is very complex and the dynamice.
The following tags occur more than once in the XML file. The "I" and "L" tags and its child tags can occur ones or more than once for each XML file and it is not constant. i.e in one file they can occur 1 time and in another they can occur 100 times.
"I" and "L" are child tags of <C>

 <J>10</J>
 <K>EN</K>

<L>
 <J>20</J>
 <N>BB</N>
</L>
Tags <C> and <F> occur only ones for each XML file. <C> is the child tag of "A" and "F" is the child tag of <C>.
I need to collect <D>, <E> in one internal table ITAB.
I need to collect <G>, <H> in one internal table JTAB.
I need to collect <J>, <K> in one internal table KTAB.
I need to collect <J>, <N> in one internal table PTAB.
Below is the complete XML file.
?xml version="1.0" encoding="iso-8859-1" ?>
<A>
 
 <C>
 <D>RED</D>
 <E>999</E>
 <F>
 <G>TRACK</G>
 <H>PACK</H>
 </F>
 
 <J>10</J>
 <K>EN</K>
 
 
 <J>20</J>
 <K>TN</K>
 
 
 <J>30</J>
 <K>KN</K>
 
 <L>
 <J>10</J>
 <N>AA</N>
 </L>
 <L>
 <J>20</J>
 <N>BB</N>
 </L>
 <L>
 <J>30</J>
 <N>CC</N>
 </L>
 </C>
</A>
With the help of SDN I am able to gather the values of <D> <E> in one internal table.
Now if I need to gather
<G>, <H> in one internal table JTAB.
<J>, <K> in one internal table KTAB.
<J>, <N> in one internal table PTAB.
I am unable to do. I am following XSLT transformation method. If some one has some suggestions. Please help.
Here is my ABAP program
TYPE-POOLS abap.
CONSTANTS gs_file TYPE string VALUE 'C:\TEMP\ABCD.xml'.
* This is the structure for the data from the XML file
TYPES: BEGIN OF ITAB,
 D(10) TYPE C,
 E(10) TYPE C,
 END OF ITAB.
* Table for the XML content
DATA: gt_itab TYPE STANDARD TABLE OF char2048.
* Table and work ares for the data from the XML file
DATA: gt_ITAB TYPE STANDARD TABLE OF ts_ITAB,
 gs_ITAB TYPE ts_ITAB.
* Result table that contains references
* of the internal tables to be filled
DATA: gt_result_xml TYPE abap_trans_resbind_tab,
 gs_result_xml TYPE abap_trans_resbind.
* For error handling
DATA: gs_rif_ex TYPE REF TO cx_root,
 gs_var_text TYPE string.
* Get the XML file from your client
CALL METHOD cl_gui_frontend_services=>gui_upload
EXPORTING
 filename = gs_file
CHANGING
 data_tab = gt_itab1
EXCEPTIONS
 file_open_error = 1
 file_read_error = 2
 no_batch = 3
 gui_refuse_filetransfer = 4
 invalid_type = 5
 no_authority = 6
 unknown_error = 7
 bad_data_format = 8
 header_not_allowed = 9
 separator_not_allowed = 10
 header_too_long = 11
 unknown_dp_error = 12
 access_denied = 13
 dp_out_of_memory = 14
 disk_full = 15
 dp_timeout = 16
 not_supported_by_gui = 17
 error_no_gui = 18
 OTHERS = 19.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
* Fill the result table with a reference to the data table.
* Within the XSLT stylesheet, the data table can be accessed with
* "IITAB".
GET REFERENCE OF gt_shipment INTO gs_result_xml-value.
gs_result_xml-name = 'IITAB'.
APPEND gs_result_xml TO gt_result_xml.
* Perform the XSLT stylesheet
TRY.
 CALL TRANSFORMATION zxslt
 SOURCE XML gt_itab1
 RESULT (gt_result_xml).
CATCH cx_root INTO gs_rif_ex.
 gs_var_text = gs_rif_ex->get_text( ).
 MESSAGE gs_var_text TYPE 'E'.
ENDTRY.
* Now let's see what we got from the file
LOOP AT gt_ITAB INTO gs_ITAB.
WRITE: / 'D:', gs_ITAB-D.
WRITE: / 'E :', gs_ITAB-E.
ENDLOOP.
Transformation
<xsl:transform xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
<xsl:output encoding="iso-8859-1" indent="yes" method="xml" version="1.0"/>
<xsl:strip-space elements="*"/>
<xsl:template match="/">
 <asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
 <asx:values>
 <IITAB>
 <xsl:apply-templates select="//C"/>
 </IITAB>
 </asx:values>
 </asx:abap>
</xsl:template>
<item>
 <D>
 <xsl:value-of select="D"/>
 </D>
 <E>
 <xsl:value-of select="E"/>
 </E>
 </item>
</xsl:template>
</xsl:transform>
Now the above pgm and transformation work well and I am able to extract data into the ITAB. Now what changes should I make in transformation and in pgm to collect
<G>, <H> in one internal table JTAB.
<J>, <K> in one internal table KTAB.
<J>, <N> in one internal table PTAB.
Please help..i am really tring hard to figure this out. I am found lot of threads addressing this issue but not my problem.
Kindly help.
Regards,
VS

Hi Rammohan,
Thanks for the effort!
But I don't need to use GUI upload because my functionality does not require to fetch data from presentation server.
Moreover, the split command advised by you contains separate fields...f1, f2, f3... and I cannot use it because I have 164 fields. I will have to split into 164 fields and assign the values back to 164 fields in the work area/header line.
Moreover I have about 10 such work areas. so the effort would be ten times the above effort! I want to avoid this! Please help!
I would be very grateful if you could provide an alternative solution.
Thanks once again,
Best Regards,
Vinod.V

How to write file into multiple directories by using file adapter?

i need to write my file into multiple directories,i able to do in single directory.But i need to write to muliple directories.Please help me out.Thanks in advance.

If you are passing the values at runtime then you can loop it and and invoke the file adapter in loop by dynamically passing the value in invoke properties for "File Directory and File name" etc.

Insert Insert XML file into multiple records in Oracle Database

I would like to find out if it is possible to insert a single XML file into multiple records or tuples in a Oracle database table. I have a single XML file which is at multiple levels. The meta data for the levels are common and each level can have meta data of their own in addition. I do not have any meta data field which will uniquely determine whether the data belongs to Root level, Intermediate level or at the document level. Is there any way I can determine which level the meta data belongs to and thereby make a corresponding entry into the database table tuple? For example I could have an attribute called level which is going to be present only in the database table and not in the XML file. If level=1 then it corresponds to "Root" meta data, if level=2 then it corresponds to "Intermediate" level and if level=3 then it corresponds to meta data at document level. I need a way to calculate the value for level from the XML file and thereby insert the meta data element into a tuple in a single table in Oracle.

Hi,
extract your xml and then you can use insert all clause.
here's very small example on 10.2.0.1.0
SQL> create table table1(id number,val varchar2(10));
Table created.
SQL> create table table2(id number,val varchar2(10));
Table created.
SQL> insert all
2 into table1 values(id,val)
3 into table2 values(id2,val2)
4 select extractValue(x.col,'/a/id1') id
5 ,extractValue(x.col,'/a/value') val
6 ,extractValue(x.col,'/a/value2') val2
7 ,extractValue(x.col,'/a/id2') id2
8 from (select xmltype('<a><id1>1</id1><value>a</value><id2>2</id2><value2>b</value2></a>') col from dual) x;
2 rows created.
SQL> select * from table1;
 ID VAL
 1 a
SQL> select * from table2;
 ID VAL
 2 b Ants

Need to Load data in XML file into multiple Oracle tables

Experts
I want to load data that is stored at XML file into multiple Oracle table using plsql.
I am novice in this area.Kindly explain in depth or step by step so that i can achive this.
Thanks in advnace.

Hi,
extract your xml and then you can use insert all clause.
here's very small example on 10.2.0.1.0
SQL> create table table1(id number,val varchar2(10));
Table created.
SQL> create table table2(id number,val varchar2(10));
Table created.
SQL> insert all
2 into table1 values(id,val)
3 into table2 values(id2,val2)
4 select extractValue(x.col,'/a/id1') id
5 ,extractValue(x.col,'/a/value') val
6 ,extractValue(x.col,'/a/value2') val2
7 ,extractValue(x.col,'/a/id2') id2
8 from (select xmltype('<a><id1>1</id1><value>a</value><id2>2</id2><value2>b</value2></a>') col from dual) x;
2 rows created.
SQL> select * from table1;
 ID VAL
 1 a
SQL> select * from table2;
 ID VAL
 2 b Ants

How do you import CSV, tab, and OFX files into multiple Numbers columns

This Apple function from Numbers '08 Help "Importing a Document" does not seem to work:
"You can create a new Numbers spreadsheet by importing a document created in Microsoft Excel or AppleWorks 6. Numbers can also import files in comma-separated value (CSV) format, tab-delimited format, and Open Financial Exchange (OFX) format."
No amount of experimenting with Import, Export, Save As, Paste and Match Style, or using other applications will enable importing CSV, tab, or OFX files into multiple Numbers columns. Instead, all data is imported into a single Numbers column, which then has to be manually and tediously parsed one data element at a time into columns, one row, and one column at a time.

Jerrold Green1 wrote:
Joe,
They all have worked here. I'm not presently able to try in Numbers 08, but I know I've done them all.
Just double-clicking a .csv file will open Numbers and display the data in a table. Dragging a .csv file to your Numbers icon on the Dock will open it as a Numbers table. Dragging it to a Sheet in an open Numbers document will make a new table in an existing document, and dragging to a table will insert the csv file into the table you dropped it into.
CAUTION
With Numbers '08, CSV files must use the comma as delimiter on every setting of decimal separator.
Numbers '09 behave differently.
With your tab-delimited file open in a word processor, copy it, then paste it into a table in an open Numbers document. When doing this, select a cell in the table, but don't double-click into the text field of the cell, then paste.
Why use this long road when we may import directly Tab Separated Values file (tsv.txt) with Numbers '08 (or '09) ?
Yvan KOENIG (VALLAURIS, France) jeudi 2 décembre 2010 21:05:36

How do I split a Large CSV file into Multiple CSV's Using Powershell

I am a novice at powershell but this looks to be the best tool to do this task. have a csv file that looks like this:
Date,Policy,Application
10/13/2014,No,None
10/13/2014,No,None
10/13/2014,No,None
10/13/2014,No,None
10/13/2014,No,None
11/14/2013,Yes,AppBiz
11/14/2013,Yes,AppBiz
11/14/2013,Yes,AppBiz
07/04/2013,No,PeopleBiz
07/04/2013,No,PeopleBiz
07/04/2013,No,PeopleBiz
07/04/2013,No,PeopleBiz
Is it possible to split this CSV into multiple CSV's based on "Application".
Lets say the output might look like:
None.csv
10/13/2014,No,None
10/13/2014,No,None
10/13/2014,No,None
10/13/2014,No,None
10/13/2014,No,None
AppBiz.csv
11/14/2013,Yes,AppBiz
11/14/2013,Yes,AppBiz
11/14/2013,Yes,AppBiz
PeopleBiz.csv
07/04/2013,No,PeopleBiz
07/04/2013,No,PeopleBiz
07/04/2013,No,PeopleBiz
07/04/2013,No,PeopleBiz
Any help would be greatly appreciated

I think this might be what you want:
Import-Csv applications.csv |
Group Application |
foreach {
$_.Group | Export-Csv "$($_.Name).csv" -NoTypeInformation
[string](0..33|%{[char][int](46+("686552495351636652556262185355647068516270555358646562655775 0645570").substring(($_*2),2))})-replace " "
Very nice! 4x faster..
I doubt the OP will get what you just did there..
Sam Boutros, Senior Consultant, Software Logic, KOP, PA http://superwidgets.wordpress.com (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable) _________________________________________________________________________________
Powershell: Learn it before it's an emergency http://technet.microsoft.com/en-us/scriptcenter/powershell.aspx http://technet.microsoft.com/en-us/scriptcenter/dd793612.aspx

Split file into multiple Instance of an IDoc .

Similar Messages

Maybe you are looking for