Split Tunneling Two VPN Clients On One Laptop?
I recently tried to check the properties of a folder on the network to see what the total file size of its contents was (on a Server 2008 R2 server, logged on using my domain admin account).The total size of the contents reported was ony 6 MB. This was a folder I knew to contain subfolders totalling in excess of 300 GB, so something wasn't right. When I drilled down a level, I realized that the subfolders would also not let me check their properties or browse to them until I elevated my access in a UAC prompt. Apparently, I don't have read access to those folders, even though Domain Admins has full access to them and I am a member of Domain Admins.All the subfolders are set to inherit permissions from the parent and checking their permissions individually confirms that Domain Admins does indeed have full access. Also, checking...
I'm trying to decide whether we should push to get Windows 10 Enterprise at it's extra costs vs getting only the free upgrade to Windows 10 Pro. I want to make sure I understand everything you get with Windows 10 Pro that is not available for Windows 10 Professional VL.I've already seen this chart on the Microsoft site, but I thinkthey have skipped orglossed over at least a few features:https://www.microsoft.com/en-us/WindowsForBusiness/CompareSome features we don't care about.Bitlocker:Since Windows 7 didn't have Bitlocker, we have already committed to third party encryption tools and use some of the features that gives you that Bitlocker does not such as assigning multiple preboot authentication IDs that can sync with active directory and being able to selectively enable or disable preboot authentication based on the location of the...
Similar Messages
-
How do split tunnelling in VPNs work?
How do split tunnelling in VPNs work?
The most visible issue is where the client's default gateway goes. In a full tunnel, it moves to the far side of the tunnel. In the split tunnel, it stays local. The security risk of split tunneling is that the client is providing a bridging path for outside malicious traffic to leak across the tunnel, with no influence from the far end's firewall and IDS. The performance risk of full tunnels is that 3rd party outside traffic not terminating at the organization on the far side still has to take the tunnel, which can add latency, limit throughput, or increase packet loss. The best designs require balancing the network layout, uplink sizing, and security posture in concert.
-- Jim Leinweber, WI State Lab of Hygiene -
Can I register two Adobe IDs on one Laptop?
Can I register two Adobe IDs on one laptop .... and, if so, how? I think this is what I need to do; we have two Sony Readers and just one laptop. Any advice would be much appreciated .... many thanks.
Hello Jannette92
You can authorize to play his and your content but you are going to want to stay away from singing in and out each others Apple ID in the same iTunes library as that can lock out one of the Apple ID’s for 90 days. The best way to handle that is to create a separate user and have it just for his stuff and then use your user for just your iPhone.
Authorize or deauthorize your Mac or PC
http://support.apple.com/kb/ht1420
iTunes Store: Associating a device or computer to your Apple ID
http://support.apple.com/kb/ht4627
How to use multiple iPhone, iPad, or iPod devices with one computer
http://support.apple.com/kb/ht1495
Regards,
-Norm G. -
How to configure full tunnel with VPN client and router?
I know the concept of split tunnel....Is it possibe to configure vpn client and router full tunnel or instead of router ASA? I know filter options in concentrators is teher options in ISR routers or ASA?
I think it is possible. Following links may help you
http://www.cisco.com/en/US/products/hw/routers/ps274/products_configuration_example09186a0080819289.shtml -
Unable to access inside network using Split tunnel RA VPN
Hi Everyone,
I configured RA Split tunnel VPN.
Connection works fine.
Inside Interface of ASA has connection to Switch IP 10.1.12.1.
When connected via RA VPN i try https://10.1.12.1 but it does not open up.
Inside Interface of ASA has IP 10.0.0.1
ASA1# $
Session Type: IKEv1 IPsec Detailed
Username : ipsec-user Index : 23
Assigned IP : 10.0.0.51 Public IP : 192.168.98.2
Protocol : IKEv1 IPsec
License : Other VPN
Encryption : IKEv1: (1)AES256 IPsec: (1)AES128
Hashing : IKEv1: (1)SHA1 IPsec: (1)SHA1
Bytes Tx : 2130969 Bytes Rx : 259008
Pkts Tx : 6562 Pkts Rx : 3682
Pkts Tx Drop : 0 Pkts Rx Drop : 0
Group Policy : ipsec-group Tunnel Group : ipsec-group
Login Time : 11:10:41 MST Sun Jan 26 2014
Duration : 0h:40m:30s
Inactivity : 0h:00m:00s
NAC Result : Unknown
VLAN Mapping : N/A VLAN : none
IKEv1 Tunnels: 1
IPsec Tunnels: 1
IKEv1:
Tunnel ID : 23.1
UDP Src Port : 62751 UDP Dst Port : 500
IKE Neg Mode : Aggressive Auth Mode : preSharedKeys
Encryption : AES256 Hashing : SHA1
Rekey Int (T): 86400 Seconds Rekey Left(T): 83975 Seconds
D/H Group : 2
Filter Name :
Client OS : WinNT Client OS Ver: 5.0.07.0440
IPsec:
Tunnel ID : 23.2
Local Addr : 0.0.0.0/0.0.0.0/0/0
Remote Addr : 10.0.0.51/255.255.255.255/0/0
Encryption : AES128 Hashing : SHA1
Encapsulation: Tunnel
Rekey Int (T): 28800 Seconds Rekey Left(T): 26375 Seconds
Idle Time Out: 30 Minutes Idle TO Left : 29 Minutes
Bytes Tx : 2137160 Bytes Rx : 259088
Pkts Tx : 6571 Pkts Rx : 3684
NAC:
Reval Int (T): 0 Seconds Reval Left(T): 0 Seconds
SQ Int (T) : 0 Seconds EoU Age(T) : 2426 Seconds
Hold Left (T): 0 Seconds Posture Token:
Redirect URL :
From ASA i can ping the switch IP
ASA1# ping 10.1.12.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.1.12.1, timeout is 2 seconds:
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/10 ms
ASA1#
logs from firewall
Jan 26 2014 11:53:20: %ASA-6-302014: Teardown TCP connection 51636 for outside:10.0.0.51/50747(LOCAL\ipsec-user) to identity:10.0.0.1/443 duration 0:00:00 bytes 1075 TCP Reset-O (ipsec-user)
Jan 26 2014 11:53:20: %ASA-6-106015: Deny TCP (no connection) from 10.0.0.51/50747 to 10.0.0.1/443 flags FIN ACK on interface outside
Why firewall logs show https connection to 10.0.0.1 instead of 10.1.12.1?
Regards
MaheshHi Jouni,
ASA1# sh ip address
System IP Addresses:
Interface Name IP address Subnet mask Method
Vlan1 inside 10.0.0.1 255.255.255.0 CONFIG
Vlan2 outside 192.168.1.171 255.255.255.0 CONFIG
Vlan3 sales 10.12.12.1 255.255.255.0 CONFIG
Current IP Addresses:
Interface Name IP address Subnet mask Method
Vlan1 inside 10.0.0.1 255.255.255.0 CONFIG
Vlan2 outside 192.168.1.171 255.255.255.0 CONFIG
Vlan3 sales 10.12.12.1 255.255.255.0 CONFIG
Connection is split tunnel.
when i check stats on vpn client all i see bypassed packets.
ASA1# sh run group-polic$
group-policy ipsec-group internal
group-policy ipsec-group attributes
dns-server value 64.59.144.19
vpn-tunnel-protocol ikev1
split-tunnel-policy tunnelspecified
ipv6-split-tunnel-policy excludespecified
split-tunnel-network-list value ipsec-group_splitTunnelAcl
Regards
Mahesh
Message was edited by: mahesh parmar -
Two production client on one instance
Hi everyone.!
Can there be two production client on a single instance.
If yes then how ?
Thanks in advance
PuneetPlease see SAP note 31557 for multiple client concept.
-
Hi, I have just bought my daughter a second-hand Vodafone 3GS phone on ebay, she lost hers but was not insured. Vodafone have giver her a new SIM, but when she puts SIM in and tries to switch on it is looking for an itunes account. She has one on her ipad, but of course it has no usb port. I have itunes on my laptop but it is set up for my 4GS phone.
Can I plug her phone into my laptop and create another itunes account where she can use her login and password without it impacting on all my itunes material?
ThanksThis should help:
How to use multiple iPods, iPads, or iPhones with one computer
Regards. -
I am trying to update my old i pod but it wont transfer the music. I realise that it used to be linked to my old windows laptop. Now I use apple mac and wondered if that was the reason?
Yes. Your iPod can only be linked with one iTunes library at a time (that is unless you manually manage your iPod's contents). So in order to sync it with the new Mac and not lose any of your existing music and content on your iPod, you'll need to copy this content from your iPod over to your Mac first.
See this older post from another forum member Zevoneer describing different ways to do this.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
Once the media is copied from your iPod to your new Mac, you can either Erase and Sync it or restore it via iTunes. From there you can sync all your old content back over to it, plus the new stuff as well.
B-rock -
Can I have two itunes accounts on one laptop
Can I have both my husbands and my account (2 seperate ids) on one laptop
Hello Jannette92
You can authorize to play his and your content but you are going to want to stay away from singing in and out each others Apple ID in the same iTunes library as that can lock out one of the Apple ID’s for 90 days. The best way to handle that is to create a separate user and have it just for his stuff and then use your user for just your iPhone.
Authorize or deauthorize your Mac or PC
http://support.apple.com/kb/ht1420
iTunes Store: Associating a device or computer to your Apple ID
http://support.apple.com/kb/ht4627
How to use multiple iPhone, iPad, or iPod devices with one computer
http://support.apple.com/kb/ht1495
Regards,
-Norm G. -
Two ipod users on one laptop - how to set up separate libraries?
My husband has a 20gb ipod with his music on my laptop. I went to install my new 30 gb and the itunes program was updated with my serial #,etc. Now his library comes up in iTunes. How can I separate his iTunes account/library from my own?
Dell Windows XPYou need to set each IPOD up to either manually update or auto update selected playlists only.
Read these please:
Auto Update and Manual Update Songs:
http://www.apple.com/support/ipod101/tunes/3/#3 -
Asa 8.2 access files share on outside network from VPN Client.
please help me
I have cisco asa 5505 with 8.2
outside is 111.22.200.51
inside is 192.168.1.0/24 dhcp
vpnpool is 192.168.10.1-192.168.10.30
configured split tunnel to vpn client to access web
I was able to connect from outside via vpn.
Goal is access fileserver(on window) on 111.22.200.21 from vpn clients.
internal client can access the share folder
vpn client cannot access ther share on 111.22.200.21
============================
names
name 192.168.1.1 ciscogw
name 111.21.200.1 umgw
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
switchport access vlan 5
interface Ethernet0/4
interface Ethernet0/5
switchport access vlan 5
interface Ethernet0/6
switchport access vlan 5
interface Ethernet0/7
switchport access vlan 5
interface Vlan1
nameif inside
security-level 100
ip address ciscogw 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 111.22.200.51 255.255.255.0
interface Vlan5
no nameif
security-level 50
ip address dhcp setroute
ftp mode passive
clock timezone MST -7
clock summer-time MDT recurring
dns server-group DefaultDNS
domain-name vpn.nmecsc.org
access-list RAteam_splitTunnelAcl standard permit 192.168.1.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 192.168.1.0 255.255.255.0 192.168.10.0 255.255.255.192
pager lines 24
logging asdm informational
mtu inside 1500
mtu outside 1500
ip local pool vpnpool 192.168.10.1-192.168.10.30 mask 255.255.255.224
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
route outside 0.0.0.0 0.0.0.0 111.22.200.1 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
quit
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd auto_config outside
dhcpd address 192.168.1.5-192.168.1.50 inside
dhcpd dns 8.8.8.8 8.8.4.4 interface inside
dhcpd wins 111.22.210.65 111.22.210.61 interface inside
dhcpd enable inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ssl trust-point ASDM_TrustPoint0 outside
webvpn
enable outside
group-policy DfltGrpPolicy attributes
banner value WARNING: Unauthorized access to this system is forbidden and will be prosecuted by law. By accessing this system, you agree that your actions may be monitored if unauthorized usage is suspected.
group-policy RA_SSLVPN internal
group-policy RA_SSLVPN attributes
vpn-tunnel-protocol webvpn
webvpn
url-list value team
group-policy RAteam internal
group-policy RAteam attributes
wins-server value 111.22.210.65
dns-server value 8.8.8.8 8.8.4.4
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value RAteam_splitTunnelAcl
default-domain value vpn.nmecsc.org
username teamssl2 password 5ZBa0qXxwLBPpvoR encrypted privilege 0
username teamssl2 attributes
vpn-group-policy RA_SSLVPN
username team2 password 5ZBa0qXxwLBPpvoR encrypted privilege 0
username team2 attributes
vpn-group-policy RAteam
username teamssl1 password 5ZBa0qXxwLBPpvoR encrypted privilege 0
username teamssl1 attributes
vpn-group-policy RA_SSLVPN
username team1 password 5ZBa0qXxwLBPpvoR encrypted privilege 0
username team1 attributes
vpn-group-policy RAteam
tunnel-group team type remote-access
tunnel-group team general-attributes
default-group-policy RA_SSLVPN
tunnel-group team webvpn-attributes
group-alias team enable
group-url https://111.22.200.51/team enable
tunnel-group RAteam type remote-access
tunnel-group RAteam general-attributes
address-pool vpnpool
default-group-policy RAteam
tunnel-group RAteam ipsec-attributes
pre-shared-key *
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
service-policy global_policy global
prompt hostname context
call-home reporting anonymous
Cryptochecksum:680b9059ca6ca6610857bab04d855031I just upgrade asa to 9.3
add access-list but still no luck. I attached the diagram.
name 192.168.1.1 ciscogw
ip local pool vpnpool 192.168.10.1-192.168.10.50 mask 255.255.255.0
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address ciscogw 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 111.22.200.51 255.255.255.0
boot system disk0:/asa923-k8.bin
ftp mode passive
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network NETWORK_OBJ_192.168.1.0_24
subnet 192.168.1.0 255.255.255.0
object network NETWORK_OBJ_192.168.10.0_26
subnet 192.168.10.0 255.255.255.192
access-list ipsec_group_splitTunnelAcl standard permit 192.168.1.0 255.255.255.0
access-list ipsec_group_splitTunnelAcl standard permit host 111.22.200.21
access-list ipsec_group_splitTunnelAcl standard permit 111.22.200.0 255.255.255.0
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-731-101.bin
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
nat (inside,outside) source static NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 destination static NETWORK_OBJ_192.168.10.0_26 NETWORK_OBJ_192.168.10.0_26 no-proxy-arp route-lookup
object network obj_any
nat (inside,outside) dynamic interface
route outside 0.0.0.0 0.0.0.0 111.22.200.1 1
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
http server enable
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ssl trust-point ASDM_TrustPoint0 outside
webvpn
enable outside
tunnel-group-list enable
group-policy ssl_vpn internal
group-policy ssl_vpn attributes
vpn-tunnel-protocol ssl-clientless
webvpn
url-list value carino
group-policy DfltGrpPolicy attributes
group-policy ipsec_group internal
group-policy ipsec_group attributes
dns-server value 8.8.8.8 8.8.4.4
vpn-tunnel-protocol ikev1
split-tunnel-policy tunnelspecified
split-tunnel-network-list value ipsec_group_splitTunnelAcl -
SonicWall Global VPN Client and Split tunneling
Hello All,
I searched Google and the forums here and can't find someone with the same problem.
Lets start at the beginning-Just started this job a couple months ago and people brought to my attention immediately an issue while they were on the VPN they could not get to the internet. I know about the different security risks but we have multiple field reps that need internet access while using our CRM program. So I setup Split Tunneling on the Sonicwall. Tested and works fine on my home PC using a WRT54GS Ver 2.1 and the SonicWall Global VPN Client.
So I was sure everything was fine until I just sent out 2 laptops to 2 different sales reps and they are both having the same issue. They can get into the internal network but can't access the internet. They are both on WRT54G (different Vers.). I tested the VPN client on both laptops with tethering on my cell phone and the split tunneling works. I have tried updating firmware thinking that was the issue. I also tried to put their home network on a different subnet. All with no joy. I was wondering if anyone ever ran into something like this or have any clues what to try next.
-Thank You in advance for your time.
Message Edited by Chris_F on 01-11-2010 07:41 AM
Chris F.
CCENT, CCNA, CCNA SecOf course, you do as you are told. But I hope you keep written record of what you have been told and have it signed of whoever told you to set it up. It's essential that you stay on the safe side in these matters.
I have read of too many cases where the system/security admin did not do so and in the end was held responsible for security incidents simply because he was told to do something to jeopardize security of the network. Remember, that usually the person who tells you do to so has no idea about the full security implication of a decision.
Thus, I highly recommend to require your road staff to connect with no split tunneling. Refuse to do otherwise unless you have it in writing and you won't be held reliable in any way if something happens because of it.
Just think what happens if the whole customer database gets stolen because of one of the remote sales reps... There is a reason why you apply this web site blocking on your firewalls and there is absolutely no reason that would justify why your remote sale reps don't go through the very same firewall while accessing company-sensitive data in your CRM.
So put that straight with whoever told you to do otherwise and if you they still want to continue anyway get it in writing. Once you ask for the statement in writing many decision-makers come to their senses and let you do your job at the best you can and for what you were hired... And if not, well, at least you got rid of the responsibility in that aspect. -
I have an iPhone, iPad, iTunes account and one laptop. My daughter will be getting an iPhone for her birthday - so, my question is, is she able to open a new iTunes account from my laptop (her laptop is broken) and download her music from the same laptop? So, two iTunes account from one laptop - Thanks.
You could Create her a User Account on your computer.
Have a read here...
https://discussions.apple.com/message/18409815?ac_cid=ha
And See Here...
How to Use Multiple iDevices with One Computer -
Cisco ASA 5505, Cisco VPN Client and Novell Netware
Hi,
Our ISP have installed Cisco ASA 5505 firewall. We are trying to connect to our Novell 5.1 server using VPN client.
I installed VPN client on a laptop that is using wireless connection. I connect using wireless signal from near by hotel and I am able to connect to my firewall usinging vpn client and also able to login in using Novell client for XP.
When I use same vpn client and Novell client at home that is not using wireless connection, but DSL connection amd not able to login or find the tree.
The only difference in two machine is laptop using wireless connection and my home machine is using wired connection using DSL.If your remote end of the services in question support IPsec IKEv1 as the VPN type then, yes - the 5505 can be a client for that service. At that point it looks like a regular LAN-LAN VPN which is documented in many Cisco and 3rd party how-to documents.
-
Can ASA5505 forward remote-access-VPN clients to LAN
I currently have ASA-5505 and 2911-Router and I'm trying to configure VPN topology.
Can ASA5505 forward remote-access-VPN clients to LAN operated by a different router?
Are these two cases possible?:
(1) ASA-5505 and 2911-Router are on separate WAN interfaces, each directly connected to ISP. But then can I connect one of other LAN interfaces of ASA-5505 into a switch managed by 2911-Router to inject remote-SSL-VPN clients into the LAN managed by the router?
(2) ASA-5505 is behind 2911-Router. Can 2911 Router assign a public ip address or have public ip address VPN-access attempts directly be forwarded to ASA-5505 when there is only one public ip address available?
Long put short, can ASA-5505 inject its remote-access-VPN clients as one of hosts on the LAN managed by 2911-router?
Thanks.I could help you more if you can explain the purpose of this setup and the connectivity between the ASA and router.
You can enable reverse-route on the Dynamic map on the ASA. The ASA will install a static route for the client on the routing table. You can use a Routing protocol to redistribute the static routes to your switch on the LAN side of the ASA.
Maybe you are looking for
-
Hello, In my report program, I need to fetch the kernel info of a system. We ususally get this from release notes in SM51 transaction or from the menu System->status then click on the 'right' arrow which is next to navigate button. Small window open
-
Why can't I play some of my movies?
I have a number of movies in my library that I bought from iTunes. I can't play half of them, despite having bought them a while ago and watching them several times. The window opens when I click on them, but then it just sits there, and it won't pla
-
Crm Upgrade from Version 4.
Hi All We are currently planning to upgrade our Crm version from 4 to version 5 or possibly version 7. We have extensivley modified the web ic bsp application and I am gathering information on what is involved in a system upgrade. If anyone has any e
-
I am considering my 2010 Mac mini to Yosemite, is there any benefit
-
AS I AM TRYING TO UNLOCK MY PHONE I GOT THIS ERROR Your request couldn't be processed.. ANY ONE PLEASE HELP ME OUT ASAP