Spotlight comments not found - possible fix

I'm having problems with spotlight comments not being indexed on some files.
The tip from djhartman http://discussions.apple.com/thread.jspa?threadID=1215039&tstart=0 fixed this:-
To remove ALL ACLs from your homedir, use:
chmod -R -N ~
Thanks a lot. The missing files soon after running the command appeared in the smart folder. I migrated from Tiger to Leopard and I have had various issues which I've only recently discovered is due to changes in how Mac OS X now handles access. Hopefully this command has done the job.
I also had some folders and files which were either missing the staff group or had permission problems. I used the following commands to fix this. 755 gives the current user read, write and execute access and gives the group the current user belongs to (probably staff or admin) read and execute access and everyone gets read and execute access. I only used these commands in folders containing my documents not in my ~Library or anywhere else that contains system files.
How to change folders or files to default user, group and permissions
Open terminal:
for folders use
chmod -R 755 (drag and drop folder here) [press enter]
(-R switch = recursively applies to all sub-folders and sub-files)
for files use
chmod 755 (drag and drop file here) [press enter]

Running the password reset actually recreated the problem but that's ok because it helped lead me to the true cause and answer. Being a member of the wrong group can cause all sorts of annoying problems e.g. asking for authentication when deleting files, spotlight not indexing some files etc. Luckily this post http://www.macosxhints.com/article.php?story=200711291134001 had the answer. I'll sum it up here:
I had a problem with spotlight not indexing some files especially spotlight comments. I'd tried deleting spotlight-V100 to re-index and many other things which did not work when all along it was a group membership problem.
I had upgraded from Tiger to Leopard. The GUI tools in Leopard showed my primary group was staff and nothing looked wrong until I discovered the Unix commands thanks to your great script. I didn't run the script but it was very well commented so I knew what the commands did if I ran them in terminal.
dscl . read /Groups/staff
showed I wasn't in the group staff. (even though system preferences>accounts>advanced options said i was!)
sudo dscl . append /Groups/staff GroupMembership $USER
added me to group staff.
sudo chgrp -R staff $HOME
changes group ownership on all files in home to staff.
sudo diskutil repairPermissions /
repair disk permissions.
Reboot.

Similar Messages

  • Spotlight Comments not found

    I added "backup" as a Spotlight Comment to a variety of files and folders using an automator action. When I search using the query Spotlight Comment contains "backup" only a few of my files and folders with that comment are found. I have tried re-indexing but still Spotlight misses some files and folders. Spotlight in Tiger would find all of them. I believe in Leopard Spotlight Comments are now written in extended attributes. Can someone please try adding a Spotlight Comment to some files/folders and see if they are all found in a spotlight search. Thanks.

    biovizier wrote:
    ..."I will say that Leopard seems a lot better at keeping track of comments than Tiger was but it probably wouldn't hurt to be mindful of how files are transferred to make sure the .DS_Store file goes with it. I personally would not rely on "Comments" for anything important.
    Hmmm. It says in Leopard Help: +To make items easier to find when you search for them, you can use the Spotlight Comments field in the Get Info dialog. For example, use the field to mark all the files for a project with the project name or tag all your urgent files with the word “urgent".+
    So, Apple are saying that it certainly should work - it is called 'Spotlight Comments' after all! What I've found though is that it's unreliable. I'm trying to reorganise all my filing around metadata - having just a few 'physical' folders and using a metadata+ Smart Folder combination to do the rest. To do this requires using the Spotlight Comments field (which can be accessed via a Finder search by using 'Other ...' from the Finder's searching popup menu. So, I having been using my own 'keywords' in the Comments field, but the problem is that sometimes Spotlight finds them and sometimes not. I can have the keyword in 6 files and spotlight will find 4 of them, sometimes all of them. I've re-edited and rearranged but cannot get consistent results.
    Has anyone had a similar experience and found any pattern to what works and what doesn't?

  • Premeire CS6 & photoshop "codec not found" bug fix

    I recently started using  premiere cs6 & found that if i import layerd photoshop file as a sequence save it & close the application. File does not reopen. i searched sevrel forum but did not found any satifactory solution.
    I did dicovered a workaround. check steps below:
    1. Import photoshop file as sequence
    2. open sequence with all the layers-> Copy all the layers
    3. Make a new sequence & choose appropriate preset ie resoluton & codec of project
    4. paste all the layers in new sequence.
    5. MAKE SURE you delete photoshop sequence that was made when importing .psd
    It will work---
    I have made a video if you dont understand the steps
    https://vimeo.com/channels/jeetstevenson/56192205
    premeire cs6 & photoshop codec not found bug fix from kamaljeet on Vimeo.
    Premeire CS6 & photoshop "codec not found" bug fix

    I did a search on my system and found the Photoshop has a fastcore plug-in.  Creative Cloud includes a subscription version of CS6 version 13.1.2.   I do not know if you installed that or not.  The cc un-install may have done something.  You may need to use Adobe Cleaner then Install The Perpetual CS6 version of Photoshop  CS6 version 13.0.6 Mac or Photoshop  CS6 version 13.0.1.3 PC and not the subscription CS6 extended version 13.1.2.  Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6   If you need to download the CS6 installer Download CS6 products.
    You may also be able to recover your cs6 using an old system backup
    fastcore.8bx on my system...

  • Spotlight/Finder only searching "new" spotlight comments not old ones

    I have a bunch of files on my external hard drive that I had taken several hours to "tag" with spotlight comments a few months back. I tagged them so I could quickly find them in Finder or Spotlight by different key words and not just file names or their contents (folders wouldn't work because the keywords overlapped many of the files. Plus folders are slow). It worked beautifully. Until I stopped adding tags for those 4 months until now.
    I hadn't been using my comments at all in the past couple of months, but i had some files that I hadn't tagged so I decided to take the time to tag all the new ones. While testing to see if the comments worked, I noticed an extreme shortage of results, compared to the results i had for the same key words 4 months ago. I noticed that only the newly tagged files were showing up. I immediately checked the old files to see if the comments were still there and there they were. I restarted my MacBook Pro, thinking that maybe it was because I hadn't done so in the past few days. I noticed the little dot in the lens of they eyeglass and thought "oh boy! it'll reindex everything!" but it only indexed "new" files of course.
    So my question is: "*How did this happen?*" But more importantly: "*+How can I fix it?+*"
    I've thought that forcing spotlight to reindex my entire external hard drive would do the trick, but I cannot find any means to achieve that goal. Plus, I would rather just be able to index the files within one folder as I wouldn't have to wait an entire day of sluggish performance for that. Any ideas?

    Let me start with the "easy" question first: the .DS_Store files are where "Finder information" is stored. Windows users find these things a pain in neck, and usually insist they be deleted. Most of time this isn't a problem, the Mac users just get annoyed when their folder doesn't open the way it was when last closed--the principle information stored there is the view the folder was told to keep, the size of the icons and their arrangement, and so on. Every time you open a folder a .DS_Store file created if one does not already exist, and if one does the file will be updated if you change your settings for the folder, for instance switch it to List view, tell it to always open in List view, with columns for Date Modified, Size, but not Kind or Date Created. And it also keeps the information entered in Spotlight Comments. Just how Finder preserves this information if a file is moved, in Mac OS, to another folder, I don't know. But it does.
    What we REALLY need is a nice little program to write to the metadata of the file. For instance, Spotlight will index keywords, which are stored in the file itself, as part of the file's metadata. I mainly work with graphics, and Photoshop allows you to add keywords to the file's metadata. Apple's iPhoto and Aperture will also add keywords, but they are not written to a file's metadata until you export them. PDFs can also have keywords assigned, you can even do it with Preview. Text documents can also have keywords added using some (most?) text editors, including TextEdit (provided the file is in RTF format). The nice thing about keyword metadata is that it goes with the file, and be accessed in any OS that allows a metadata search.
    Unfortunately I don't know of any program that would allow you to select a batch of miscellaneous files and add the same keyword to all of them. It would certainly be handy though.
    Francine
    Francine
    Schwieder

  • Spotlight comments not available?

    I've developed an internal website at work that uses PHP, MySQL, Applescript and PDF files to manage the workflow for print projects.
    The basic setup is that a user "publishes" a PDF from InDesign using an Applescript (which ensures the PDF is created with standard settings and file security) and the PDF is copied to the webserver into a folder for review. The applescript then puts the designer's name into the PDF's Spotlight comments.
    Someone reviews the project from a web-page, which looks in the folder and displays thumbnails of its contents. PHP runs an exec() to get the Spotlight comments, and displays the designer's name below the thumbnail, along with the date and time the PDF was "published".
    $PDFcomment = exec("osascript -e 'tell app \"Finder\" to get comment of POSIX file \"$projectsFile/$shortID/$dirShort.pdf\"'");
    The problem I'm running into is that this command is not consistently returning the Spotlight comment. Often the PHP webpage says it's empty, but when I go to the networked volume where these PDFs are stored and Get Info, I can see the correct comment.
    The comment will only appear if I use the Finder on the machine that houses the PDF and Get Info. Subsequent viewings of the PHP webpage then return the correct comment.
    How can I force the Finder to get the current Spotlight comment without having to manually check the file first?
    PowerMac G4   Mac OS X (10.4.5)  

    Running the password reset actually recreated the problem but that's ok because it helped lead me to the true cause and answer. Being a member of the wrong group can cause all sorts of annoying problems e.g. asking for authentication when deleting files, spotlight not indexing some files etc. Luckily this post http://www.macosxhints.com/article.php?story=200711291134001 had the answer. I'll sum it up here:
    I had a problem with spotlight not indexing some files especially spotlight comments. I'd tried deleting spotlight-V100 to re-index and many other things which did not work when all along it was a group membership problem.
    I had upgraded from Tiger to Leopard. The GUI tools in Leopard showed my primary group was staff and nothing looked wrong until I discovered the Unix commands thanks to your great script. I didn't run the script but it was very well commented so I knew what the commands did if I ran them in terminal.
    dscl . read /Groups/staff
    showed I wasn't in the group staff. (even though system preferences>accounts>advanced options said i was!)
    sudo dscl . append /Groups/staff GroupMembership $USER
    added me to group staff.
    sudo chgrp -R staff $HOME
    changes group ownership on all files in home to staff.
    sudo diskutil repairPermissions /
    repair disk permissions.
    Reboot.

  • Spotlight Comments not editable for App Store Apps

    I'm liking the app store and the ability to download apps quickly and efficiently. However, I'm not able to edit spotlight comments for downloaded apps. I've tested editing spotlight comments for my regular assortment of apps that were not downloaded from the App store and didn't have a problem. Nor did I have a problem editing spotlight comments for regular files. I've just been locked out of editing app store apps. The permissions for App Store Apps appear to be set identically to other apps I have. I'm wondering if this has something to do with the built in update process for these apps, and now they are locked out for any modification by end users? Anyone else have this problem, or know of a workaround?

    Good:
    Unlocking the application and adding the privilege allowed me to edit the spotlight comment.
    Bad:
    After updating the application (Sparrow Mail for my example), I'm in a worse spot.
    I changed the privileges again, and unlocked the application.
    I can not edit the comment.
    Spotlight is not finding the comment.
    Reindexing Spotlight
    Still not finding it.
    Anyone have suggestions on this one?

  • Is the Monstrous GB1 "File Not Found" Bug Fixed in GB3?

    I'm using GB1 and I've discovered that songs with imported AIFF audio like to get corrupt, and when you open them, say they can't find something like "MyFile#68343EF.aiff".
    The actual file it should be looking for is "MyFile.aiff".
    Apple seems unconcerned with patching this flaw that makes GB1 completely unusable.
    Is this still happening in GB3??
    I see one GB3 post on a fellow about to kill himself over a disappeared AIFF file but I'm not sure if that's the same issue or not.

    I found your thread. But that's a totally different problem. Your issue is, if you record directly to GB, the AIFF audio file goes into the Package and a segment appears for it in the GB timeline. If you now delete the segment from the timeline and resave, GB deletes the AIFF audio file from the Package.
    (That's actually logical behavior -- there just should be a warning and option to save a copy of the AIFF to the Desktop before deleting from the song.)
    My problem is totally different. It occurs for pre-existing AIFF files that you've dragged into the timeline.
    GB loses track of the existing AIFF files (linked or in the Package). The segments are still in the timeline -- but they show as "silence". GB is looking for file names that are variations of the original AIFF file name, instead of the actual AIFF file name.
    Here's someone having the problem with GB2 or GB3 I think:
    http://discussions.apple.com/thread.jspa?messageID=3093150
    The workaround of "just dragging the audio back into the timeline" is no solution if the timeline consists of hundreds of tiny little segments painstakingly edited together from different AIFF audio files.

  • Firefox has been crashing daily. I have not found a fix. If I am unable to fix Firefox I will delete it and find annother APP.

    All of a sudden out of the blue I get a message that Firefox has crashed. With several options, which pretty much make me start over. Quite frankly I am a bit P's and will remove Firefox from my system and find another more reliable App.

    Damn thing crashes about every 40 minutes at best.
    Bloody useless.
    And yes I've tried disabling the add-ons and updating the plug-ins and every other measure known to man. Still doesn't work.

  • After Effects error: Could not launch Adobe Analysis Server (515)   ( 25 :: 101)  *POSSIBLE FIX*

    Hi. Im New to the forums so sorry in advance if i do something incorrect
    Since my Purchase of Adobe CS6, I was not able to use dynamic link, or the plugins that required you to connect to the Adobe Analysis Server (3d Tracker, Warp Stablizer ETC) It would always give me the error
    After Effects error: Could not launch Adobe Analysis Server (515)
    ( 25 :: 101)
    Or if i would use dynamiclink
    The Importer created a generic error
    Through hours and hours searching through the internet, and trying possible fixes, i found possible fixes that might help people with this error.
    *Before attempting any of these fixes, make sure you reinstall CS6 Using the Adobe Cleaner*
    This guide is for Windows OS Only.
    If the error still presists, try these options
    -If your windows account is not a administrator, Run Adobe After Affects CS6 As Administrator
    -Disable your Anti-Virus and your Firewall
    I know you have probably heard this over and over again, but this is mainly the cause of the problem. Some Anti-Viruses even when disabled, go into some sort of one eyed open mode, where it still monitors your computer ever so slightly, so you may want to uninstall the anti-virus. As for the firewall,
    1) Go to your start menu search "Check Firewall Status"
    2)Then to the left of the window, click Turn Windows Firewall on or off
    3)Then tick "Turn of Windows Firewall" on BOTH Home or work network and Public Network.
    -Close and Uninstall filtering and spyware programs such as Netnanny and Premiere Opinion. This might be using the TCP Ports that is needed for After effects, dynamic link and adobe analysis server to communicate
    -Start up Adobe Analysis server Manually. This can be done by going to C:\Program Files\Adobe\Adobe After Effects CS6\Support Files and running Adobe Analysis server.exe as Adminisrator, Then starting Premiere, After effects, etc.
    -If the Adobe Cleaner didnt already, Clean your registry. This can be done with free applications such as CCleaner.
    If none of those options work,  I would suggest a full format and reinstall of windows.
    I hope this would help people with this issue.

    captain_astronaut wrote:
    I'm running the latest version. Just installed yesterday.
    You can download and install the latest version (and older versions) of versions 11, 12, and 13 from Adobe right now. That is why I was asking for the exact version number with decimals. Just the other day, someone said they were running the latest version and they weren't aware that CC was even a thing. They were running version 11.0.3 (which isn't even the latest version of CS6 - it's 11.0.4). That's why I always ask.
    captain_astronaut wrote:
    I'm on a Mac so I don't have anti-malware, or other security software running.
    That doesn't seem like a good idea. While there can't be anything technically referred to as a "virus" on the Mac OS (due to the underlying structure), there can be (and are) malware variants out there that do attack machines running the Mac OS. As Apple products have grown in popularity, developers have been creating more and more malware aimed at OSX.
    I certainly hope you at least have your firewall running.
    captain_astronaut wrote:
    I tried launching Premiere yesterday and it crashed.
    This points to a much more serious underlying problem. Thousands (if not millions) of people are running Premiere and After Effects on Macs. What sort of error messages did you receive when it crashed?
    Try installing version 12 of AE and the previous version of Premiere as well and see if they run.

  • My spotlight does not seem to be working correctly

    This is the 3rd time spotlight has not found a document I knew was in my documents folder.
    How do I go about fixing this.
    thanks,
    Laura

    Hi L,
    Yes, that is usual, I had the same issue.
    Use the Finder's search for a while, Spotlight is constantly indexing and will collect metadata to perform better search in sometime.
    Do this kind of search:
    Give focus to Finder and hit COMMAND+F > from the drop down box where KIND is select choose OTHER > from the next window select NAME, CONTENTS, SYSTEM FILES, FILE VISIBILITY and others that you find useful > back to the drop down select NAME and CONTAINS or ENDS WITH if you know some part of the name or extension or then select CONTENTS if you wish > enter what to search > choose the place to look at right after "Search:" above the drop down combo. If this do not return results hit the + sign on the right and add System Files as included, hit + again to add File Visibility as Visible or Invisible.
    If search brings too much internet browsing history or other files you do not want to see hold OPTION and hit the "..." that were shown in the + sign to exclude or make other associations as you wish.
    Good luck.

  • OS 6 Multi-language "FILE NOT FOUND"

    Someone here please see this post.
    I am trying to download the software update for the bold, the multilanguage file.
    After you enter your phone number, I am redirected to a page that says "File not Found"
    PLEASE fix this.. or let me know where I can download the multi-language os

    I have provided some information below that may help.
    To download the Blackberry 6 Multi-language software, please follow the steps below:
    Step 1 – Visit the website www.vzam.net/blackberry
    Step 2 – From the main page select the Personal Email (for consumer) or Corporate Email (if you are going to use a BES or company email)
    Step 3 – Choose the model Blackberry you will be using
    Step 4 – Follow the steps on the page and select the options
    -Choose upgrade if it is going to be a web-based upgrade, or continue with the instructions below if it is going to be through desktop manager.
    -Select Multilanguage
    -Enter your 10 digit mobile number
    -Select download at the bottom of the page
    I hope this helps.

  • My iTunes will not start.  The box on the error message APSDaemon.exe,  And message says "This application failed to start because MSVC80.dll was not found.  Reinstalling may fix."  I did the reinstall and I get the same error.

    My iTunes will not start.  The box on the error message APSDaemon.exe,  And message says "This application failed to start because MSVC80.dll was not found.  Reinstalling may fix."  I did the reinstall and I get the same error.  The error first happened after I approved the an iTurns update.

    Same problem today. Took five times to reinstall without any error messages. Apple has posted a way to fix and you should follow their's first. I finally got to upldate correctly by doing their fix but with one difference. I did the following:
    1) Went to the C:\program files (x86)\iTunes and C:\program files\iTunes folders and moved every file ending in .dll to the desktop (even if two files in same location had the same name, just replace)
    2) Restarted computer and still got error message
    3) Uninstalled all apple programs possible in the following order......itunes, apples software update, apple mobile device support, bonjour, and apple application support.....all performed using the microsoft control panel
    4) put all the .dll files on the desktop in the trash and emptied (this is a step apple support did not specifically put in their fix but for a final try I wanted to delete everything apple).
    5) Restarted computer.
    6) Re-installed itunes from apple website
    No error messages during re-install and was able to open shortcut in one try. Even updated my ipad to make sure everything was working.

  • IPhoto frustrating error..The volume for "Df23.JPG" cannot be found. It prompts for all photos with this issue rather than offering an option to ignore. I can find the images in spotlight but not in Find Photo. Does anyone have a solution

    iPhoto frustrating error..The volume for "Df23.JPG" cannot be found. It prompts for all photos with this issue rather than offering an option to ignore. I can find the images in spotlight but not in Find Photo. Does anyone have a solution?

    Unless you have the source files that were on the TC or Windows machine you will have to start over with a new library as follows:
    Start over from scratch with new library
    Start over with a new library and import the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from your original library as follows:
    1.  Move the existing library folder to the desktop.
    2. Open the library package like this.
    Click to view full size
    3. Launch iPhoto and, when asked, select the option to create a new library.
    4. Drag the Masters (iPhoto 11) folder from the iPhoto Library on the desktop into the open iPhoto window.
    Click to view full size
    This will create a new library with the same Events as the original library but will not keep the metadata, albums, books slideshows and other projects.  Your original library will remain intact for further attempts at fixes is so desired.
    OT

  • I cannot log into facebook. I get the following message: 404 Error - Not Found The resource you have requested could not be found on the server. There are many possible reasons for this. Either the file does not exist, there is an error in your request,

    I am not able to go to the facebook site. www.facebook.com is not working. I get the following error message. 404 Error - Not Found
    The resource you have requested could not be found on the server. There are many possible reasons for this. Either the file does not exist, there is an error in your request, or the file is not accessible in the requested directory. Please verify that:
    * You have used the proper case; requests ARE case-sensitive!
    * You have entered the URL correctly. (i.e. proper directory/filename)
    * You used the FULL URL. (i.e. proper file type: .html, .gif , .jpg, etc.)
    * You use a tilde (~) before user directories. (i.e. www.furcen.org/~jurann/ )
    * The user/file still exists on this server.
    I also get redirected to "Busca Google" when typing www.facebook.com in the address bar.
    == URL of affected sites ==
    http://facebook.com; buscagoogle.com

    I have the same problem and it does not have to do with firefox. Do you have any idea how to fix it through?

  • I'm getting a message "404 (page not found error)" I think I entered an incorrect URL into my browser's address bar. How do I fix that?

    I was trying to post a comment on a support group site. I was asked what web address I was using, or something along those lines. In hindsight, I stupidly typed a '?' and pressed send. Now, when I try to access that site I get the message "404 (page not found error)
    If you're the site owner, one of two things happened:
    1. 1) You entered an incorrect URL into your browser's address bar, or
    2. 2) You haven't uploaded content."
    How can I fix this.

    I spoke with a Dell technician about this problem. He tried to access the site in question from his computer, i.e. separate from my computer, and he also got the same "404 (page not found error)". He said the problem lies with the site itself, not my computer, and that I should notify the site. Problem is I can't notify the site if I can't access it.

Maybe you are looking for

  • Claim of Tax Treaty Benefits . Row 10 : Information not available for France "99-Income Type Not Listed"

    I am an individual and wants to register for Tax. I am living in France and I am entered "France" in front of the row 9 in the Part 2 (Claim of Tax Treaty Benefits) But for the row 10 I am unable to select the 0% rate. Only 30% is available and nothi

  • Hisses and pops in both Final Cuts

    Hey guys, I've been having some weird problems. Since I upgraded from Final Cut Express to Final Cut Pro, all my video (both rendered and exported to various formats) have hisses and pops in the audio. The problem now also occurs in Express. Did an a

  • 16:9 in iDVD 4.0.1

    I'm attempting to import some 16:9 Quicktime files (extension m 1) into iDVD. On Preview, though, the video is being horizontally stretched to fill the 4:3 frame. I'd like for the 16:9 content to maintain its aspect ratio and to be centered in the 4:

  • License keys for mySAP Business Suite

    Hello, We have IDES system installed with Oracle database. IDES system was a part of installation of productive system. Our license expired 5 days ago. I requested new license from the site and only recieved temporary one. It says: "License keys for

  • After download of update Adobe Reader X1

    I cannot open any PDFs in email attachments or online.  I get a message "Eula display has stopped working" if I try to open Adobe Reader.  If I attempt to open a PDF file the message is "photo gallery can't open this photo or video this file format i