Spotlight on xsan not working for clients

I have a xsan.  There are four clients running 10.8.5 and two mdc mac mini's running 10.8.5.  The clients are unable to get search results of items on the san volumes.  Any help would be appreciated.

The active MDC does the indexing. It's not the fsm process that runs the volume that does the indexing, but rather Spotlight related processes (mds, mdworking, mdimport, etc) which are accessing files on the volume which the MDC has mounted as an Xsan client. The volume has to be mounted on the active MDC for indexing to work. The mount has to occur after Spotlight has been enabled on the volume.
As stated in this article:
Xsan 2.x: If an Xsan volume failover occurs before Spotlight becomes active, the Backup Controller may not enable Spotli…
"Use Xsan Admin to unmount and remount the volume on the controller that is currently hosting the volume.  It may still take several minutes for Spotlight to activate."
You could also do this on the MDC (which you would have to do if it's a Yosemite MDC):
sudo xsanctl unmount VolumeName
sudo xsanctl mount VolumeName

Similar Messages

  • Spotlight/Searching does not work for afp shares in Lion

    Hi
    I cannot search for files in Finder on my afp shares. The server and client are both running Lion 10.7. Anything I am missing? Should this work or not? I'm so used to Spotlight I would really hate it if this isn't supported for afp shares.
    Thanks NEI

    Acrobat catalog, PDX, files only work from local or network drives.
    From Acrobat's Help;
    "Moving collections and their indexes"
    "You can develop and test an indexed document collection on a local hard drive and then move the finished document collection to a network server or disk."

  • Apple Mail Search and Spotlight do not work for locating email messages after upgrading to Lion 10.8.3.

    Apple Mail Search and Spotlight do not work for locating email messages after upgrading to Lion 10.8.3 on my 27" iMac.
    When searching in Apple Mail, sometimes a get a few results (with many missing), and sometimes no results at all.
    I had absolutely no problems before with Snow Loepard.
    I have reindexed mail and my startup drive. I have followed discussions regarding this matter and tried everything - a waste of time.
    This is VERY serious for me - I have many thousands of messages that I archive and need to reference for work and clients, and now I cannot find them.

    I found out that I needed a $100 mini displayport to dual-link dvi adapter to make my $30" cinema display work with my macbook pro
    http://store.apple.com/us/product/MB571Z/A/mini-displayport-to-dual-link-dvi-ada pter?fnode=51
    When I found out that solved the problem, I took it back because that was too expensive for a stupid adapter, and it still didn't work perfectly.

  • Software Update Point Switching is not working for some Clients

    Hi there,
    I found nothing similar here and I hope this is the right section.
    I´m running ConfigMgr 2012 R2 where one of the Site Systems from one of the Primaries is located in an untrusted Forest in a perimeter Network. The Site System there has the MP, SUP and DB Roles. In general it works great. The Systems in that untrusted Forest
    get the SCCM Agent pushed, see and can install published Software packages and receive Windows Updates. But there are a few systems where everything works, except Windows Updates.
    So I had a deeper look at what is happening and found out that the SUP switching is not working for them. They always try to contact the SUP from the Primary, which they cannot reach (this is intended).
    From how I understand SUP switching as described here
    http://blogs.technet.com/b/configmgrteam/archive/2013/03/27/software-update-points-in-cm2012sp1.aspx#pi140062=1
    the Windows Update Agent tries to connect to a SUP every 30 minutes and after 4 failed attempts he will try to connect to the next one until he finds one which works.
    As I said before, this seems to work for most systems in the untrusted forest, but some do not make any intentions to switch the SUP.
    So my next step was to find out from where the Update Agent can get the information of the available SUPs. I think they either don´t receive the information that other SUPs exist, or if the Information is there, they don´t realize that there´s an error and
    make no attempt to switch.
    I used the System Center Support Center to gather all Information from some of the systems with that problems (Log Files, WMI information, registry information, policies etc.) but I cannot find where SCCM or the Update Agent store the information which SUPs
    are available in my environment.
    I´m sure the problem is on the Systems which fail to connect to the right SUP and not in the SCCM infrastructure itself, because for most of the systems everything is working just perfect. Unfortunately in the Blog Post above there´s also no information
    where this information is stored and how it is obtained by the clients. In the comments there´s even one post which describes the same problem I have here, but there was no answer. I hope someone can point me into the right direction, because I´m stuck currently.
    Things I tried additionally to all the log file / WMI / registry sniffing:
    Removing the Software Distribution Folder and restarting the Windows Update Agent
    Removing the WindowsUpdate Registry folder in the HKLM\SOFTWARE\Policies\Windows section in the Registry and restarting the Windows Update Agent.
    Tried to reset the WUAgent with wuauclt /Resetauthorization additionally to the steps above.
    I also tried to manually set the WUServer and WUStatusServer Keys in the registry to the new Server, but as soon as the next Update Scan cycle runs, the value is set back to the URL of the Primary Sites SUP
    Is someone having additional ideas? It seems to me older systems are more affected (which were configured for a standard WSUS before SCCM 2012 was deployed) than newer ones which were installed when SCCM was in place already. But I don´t know what else to
    "reset" on those machines without reinstalling them.

    Thank you very much for your response. I must have missed that one by looking through numerous Logfiles. In this, there´s indeed a list of all available SUPs. So according to the LocationServices.log the machine should have a choice.
    The WMI Key however, contains just one entry and this is the URL of the Primaries SUP which is not reachable in the untrusted forest. Is it OK that the WMI entry includes only one entry? If yes, what process is putting the results from the LocationServices
    into WMI? It seems like the Windows Update Agent is feeded from the WMI Key then. If this is the case my problems seems to be the "communication path" between these two components.
    Is this the job from the SCCM Agent, the Windows Update Agent or maybe some third component I´m not aware of? I wonder how I can fix this.

  • Document library open in client application not working for img,pdf,txt files

    In an office 365 sharepoint site i have enabled open in client applicartion for document library but it is not working for image/txt/pdf files for word and excel files it is working fine. I have even turned on the feature open document in client application
    by default from site collection features also but there is no change.
    Please advice.
    Regards,
    Chaitanya

    Hi Chaitanya,
    The feature is currently designed to be used with HTTPS, and will not work as expected with the HTTP connection available on Office 365 for professionals and
    small businesses sites.
    To take advantage of this update, do the following steps:
    Wait for the update to the SharePoint Online service, which is in progress now.
    Upgrade Adobe Reader to the version 10.1.2 client.
    Add your SharePoint Online root URL/domain to the Trusted Sites security zone in Internet Explorer1 (e.g., 
    https://contoso.sharepoint.com).
    Check the Keep me signed in box when you log in to a SharePoint Online site.
    This
    SharePoint Online update is currently
    being rolled out worldwide along with several other new features.
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • After Upgradation BPF is not working for some users

    Hi All,
    We have recently upgraded from BPC 5.1 to 7MS SP7.  we are having multi server setup with one application / reporting server (windows 2003 and one sql server 2008 (windows 2003 64 bit).
    Intially before upgradation we don't have any issues with BPF and it worked fine for all users. But post upgradation tasks within the BPF  does not work for other users except for the first two people who first  used it. Other users have the same rights as the ones who can access the tasks.
    when they  click on the link it gets them to eExcel and the right application but doesnt open the package or report assigned to the task. It doesn't give us any errors, on the status bar we get a message finalising but does  not getting any thing.
    Any inputs ??

    Hi,
    Are you sure that those users have installed BPC 7 SP7 clients on their machine? Meaning that you uninstalled 5.1 clients and installed the new client from http://servername/Osoft?
    If yes, you should maybe run a client diagnostic on the machines and also check the Management Console for any error messages.
    Hope this will drive you to a potential solution.
    Best Regards,
    Patrick

  • MAM application is not working for some users

    Hi All,
    Tha MAM application is not working for some users.Different users have different workcenters other than that I dont see any other change. When I run MAM30_090_GETLIST in the backend I can see the no of customized users.But I cant see same no of users in the MEREP_207 table for the Syncbo MAM30_090 and strcture id TOP in the middleware. There is a data when I checked under worklist monitor for that user. But neither the MAM application nor MAM data is downloading to that device.
    If I use different user on the same device I can see the MAM application and MAM data.
    What could be the wrong in this case. Any help would be highly appreciated.
    Mobile Client:MI 70 SP 15 Patch 0 Build 200802280918
    Middleware:SAP NetWeaver 2004s with Patch leve 15
    Backend:SAP ECC 6.0
    Application:MAM 3.0
    Thanks and Regards,
    Ameer.

    Hi,
    from your description the source of your issue is quite obvious: some of the MAM users configured in spro are not configured properly.
    For T01 SyncBos the number of TOP records in merep_207 MUST be the same as number of headers returned by an appropriate getList FM in the backend.
    You need to solve this before you can go any further.
    Reason why a record is not recorded in MEREP_207 - getdetail failed for whatever reason. So execute MAM30_ML_getdetail for each of the users that is not replicated in the middleware and check if there are errors in RETURN table. If there is no error - one of the common reason for replication fail is when there are records in item tables that have duplicate primary keys.
    Regards,
    Larissa Limarova

  • Spotlight shortcut does not work (ctrl + space)

    Spotlight shortcut does not work. When I press ctrl + space, nothing happen. When I click on magnifier icon by mouse, everything work well.
    In Spotlight configuration and also in keyboard shortcut configuration this shortcut is present and marked as active.
    I've also tried to disable and enable back this shortcut but it still not work.

    Hello Zeleznypa,
    For me, the default shortcut for Spotlight is Command - Space (not Control Space).
    OS X Yosemite: Spotlight keyboard shortcuts
    Open Spotlight to start a search  Command (⌘)-Space bar
    Open a Finder window with the search field selected  Option-Command (⌘)-Space bar
    I changed the shortcut in System Preferences to Control Space and it still worked with that.
    Could you check your keyboard with the Keyboard Viewer?
    OS X Yosemite: Use the Keyboard Viewer
    Take care,
    Nubz

  • Remote access vpn not working, VPNC client

                       Hi,
    I have configured a remote access vpn client on cisco ASA 5520 with the following configuration. we are using cisco vpn client.
    tunnel-group consultant type remote-access
    tunnel-group consultant general-attributes
    address-pool VPN
    authentication-server-group RSA-AAA LOCAL
    default-group-policy consultant
    tunnel-group consultant ipsec-attributes
    pre-shared-key *
    group-policy consultant internal
    group-policy consultant attributes
    vpn-idle-timeout 120
    vpn-session-timeout 720
    vpn-tunnel-protocol IPSec
    split-tunnel-policy tunnelspecified
    split-tunnel-network-list value access-spilt
    access-list access-spilt standard permit host 10.101.50.60
    One of the linux users is using vpnc and once the user connects to the vpn and the user adds a static route on the machine with the destination pointing to the vpn interface, for example 10.101.50.0/24, user is able to reach all the hosts in the subnet even though the access list on the firewall is configured for one host 10.101.50.60.
    I did the same test on a windows machine, but was only able to reach the specific host allowed through vpn.  why is the network filter not working for vpnc. please advise.
    Thanks

    Hi have solved the issue . enabling the demo 3DES & AES now my VPN is connecting
    https://tools.cisco.com/SWIFT/LicensingUI/loadDemoLicensee?FormId=139
    thx to friend "Jennifer Halim"

  • OOF not working for mailboxes homed on Exchange 2010 server during migration

    Hi There
    I'm troubleshooting an issue during a exchange 2010 to exchange 2013 migration where the OOF is not working for users homed on the exchange 2010 mailbox servers. This applies to users using outlook 2010 and outlook 2013 .OWA works perfectly and you can also
    enable OOF via exchange powershell.
    Users homed on the exchange 2013 servers does not have any issues.
    The exchange 2010 servers is on SP3 rollup 4 and the 2013 servers on SP1 only without any rollups installed.
    So my question will be - have anyone experienced this issue during migration and will patching the exchange 2010 servers to rollup 5 or 6 and the exchange 2013 to sp1 rollup 5 fix the OOF issue then? If requested the client to patch to these levels, but
    in the meantime I'm checking if anyone else had similar issues.
    Any pointers will be welcome.

    Hi ,
    1.Please check the problematic exchange 2010 user account can able to access the ews virtual directory internal url and you can check that via browser's.It will prompt for the user name and password , please provide that .
    EWS url wopuld be like - https://mail.youdomain.com/EWS/Exchange.asmx
    2.Then the second step would be autodiscover check for the problematic user account.you can find that via test email configuration .There you came to know whether outlook is fetching up the proper url for ews and autodiscover.
    3.Then please un check the proxy settings in browsers and check the same.
    4.please use the command to check the auto discover 
    test-outlookwebservices
    Please check the below links also.
    http://exchangeserverpro.com/exchange-2013-test-outlook-web-service/
    http://www.proexchange.be/blogs/exchange2007/archive/2009/07/14/your-out-of-office-settings-cannot-be-displayed-because-the-server-is-currently-unavailable-try-again-later.aspx
    http://port25guy.com/2013/07/20/user-cannot-set-an-out-of-office-in-exchange-20102013-or-eventid-3004-appears-in-your-event-log/
    http://www.theemailadmin.com/2010/06/exchange-server-2010-out-of-office/
    Regards
    S.Nithyanandham
    Thanks S.Nithyanandham

  • Tacacs not working for 5508

    Tacacs not working for 3 new 5508 WLC's...working fine for 6 old 4400 WLC's.
    before 7.116 code upgrade...I remember 5508 was working on and off and now they are not.
    Same configs on SW, WLC and ACS.
    Debug on WLC gives..below message when Tacacs is attempted..
    *aaaQueueReader: Oct 25 09:20:41.700: tplus_processAuthRequest: memory alloc failed for tplus
    Any pointers for troubleshooting? Not sure why statistics show zero...?? Radius is working for users.
    (wlc03) >show tacacs auth statistics
    Authentication Servers:
    Server Index..................................... 1
    Server Address................................... 10.3.121.21
    Msg Round Trip Time.............................. 0 (msec)
    First Requests................................... 0
    Retry Requests................................... 0
    Accept Responses................................. 0
    Reject Responses................................. 0
    Error Responses.................................. 0
    Restart Responses................................ 0
    Follow Responses................................. 0
    GetData Responses................................ 0
    Encrypt no secret Responses...................... 0
    Challenge Responses.............................. 0
    Malformed Msgs................................... 0
    Bad Authenticator Msgs........................... 0
    Timeout Requests................................. 0
    Unknowntype Msgs................................. 0
    Other Drops...................................... 0
    Server Index..................................... 2
    --More-- or (q)uit
    Server Address................................... 10.3.121.22
    Msg Round Trip Time.............................. 0 (msec)
    First Requests................................... 0
    Retry Requests................................... 0
    Accept Responses................................. 0
    Reject Responses................................. 0
    Error Responses.................................. 0
    Restart Responses................................ 0
    Follow Responses................................. 0
    GetData Responses................................ 0
    Encrypt no secret Responses...................... 0
    Challenge Responses.............................. 0
    Malformed Msgs................................... 0
    Bad Authenticator Msgs........................... 0
    Timeout Requests................................. 0
    Unknowntype Msgs................................. 0
    Other Drops...................................... 0
    (wlc03) >show tacacs summary
    Authentication Servers
    Idx  Server Address    Port    State     Tout
    1    10.3.121.21     49      Enabled   5    
    2    10.3.121.22      49      Enabled   5    
    Authorization Servers
    Idx  Server Address    Port    State     Tout
    1    10.3.121.21      49      Enabled   30   
    2    10.3.121.22     49      Enabled   5    
    Accounting Servers
    Idx  Server Address    Port    State     Tout
    1    10.3.121.21      49      Enabled   5 
    We can ping the TACACS servers...

    >show memory statistics
    System Memory Statistics:
    Total System Memory............: 1028820992 bytes
    Used System Memory.............: 458424320 bytes
    Free System Memory.............: 570396672 bytes
    Bytes allocated from RTOS......: 21939008 bytes
    Chunks Free....................: 29 bytes
    Number of mmapped regions......: 45
    Total space in mmapped regions.: 212779008 bytes
    Total allocated space..........: 12015112 bytes
    Total non-inuse space..........: 9923896 bytes
    Top-most releasable space......: 133800 bytes
    Total allocated (incl mmap)....: 234718016 bytes
    Total used (incl mmap).........: 224794120 bytes
    Total free (incl mmap).........: 9923896 bytes
    show buffers
    Pool[00]: 16 byte chunks
        chunks in pool:    50000
        chunks in use:     19030
        bytes in use:      304480
        bytes requested:   90479 (214001 overhead bytes)
    Pool[01]: 64 byte chunks
        chunks in pool:    40000
        chunks in use:     14519
        bytes in use:      929216
        bytes requested:   566395 (362821 overhead bytes)
    Pool[02]: 128 byte chunks
        chunks in pool:    20000
        chunks in use:     7726
        bytes in use:      988928
        bytes requested:   672853 (316075 overhead bytes)
    Pool[03]: 256 byte chunks
        chunks in pool:    4000
        chunks in use:     808
        bytes in use:      206848
        bytes requested:   154777 (52071 overhead bytes)
    Pool[04]: 1024 byte chunks
    --More-- or (q)uit
        chunks in pool:    15300
        chunks in use:     11645
        bytes in use:      11924480
        bytes requested:   4945714 (6978766 overhead bytes)
    Pool[05]: 2048 byte chunks
        chunks in pool:    1000
        chunks in use:     189
        bytes in use:      387072
        bytes requested:   355272 (31800 overhead bytes)
    Pool[06]: 4096 byte chunks
        chunks in pool:    1000
        chunks in use:     36
        bytes in use:      147456
        bytes requested:   102479 (44977 overhead bytes)
    Raw Pool:
        chunks in use:     186
        bytes requested:   156052303
    show process memory
    Name               Priority       BytesInUse  BlocksInUse    Reaper
    cslStoreManager    (240/  7)              0            0      (  0/  0)%
    System Reset Task  (240/  7)              0            0      (  0/  0)%
    reaperWatcher      (  3/ 96)              0            0      (  0/  0)%   I
    osapiReaper        ( 10/ 94)              0            0      (  0/  0)%   I
    TempStatus         (240/  7)            424            1      (  0/  0)%   I
    pktDebugSocketTask (255/  1)              0            0      (  0/  0)%
    LICENSE AGENT      (240/  7)           2228           85      (  0/  0)%   I
    emWeb              (  7/ 95)        1235795        20743      (  0/  0)%   T 300
    webJavaTask        (240/  7)              0            0      (  0/  0)%
    fmcHsTask          (100/ 60)              0            0      (  0/  0)%
    apstatEngineTask   (240/  7)              0            0      (  0/  0)%
    rrcEngineTask      (240/  7)              0            0      (  0/  0)%
    spectrumDataTask   (255/  1)        1614480           12      (  0/  0)%
    spectrumNMSPTask   (255/  1)          28808            3      (  0/  0)%
    wipsTask           (240/  7)              0            0      (  0/  0)%
    tsmTask            (255/  1)              0            0      (  0/  0)%
    cids-cl Task       (240/  7)              0            0      (  0/  0)%
    ethoipSocketTask   (  7/ 95)              0            0      (  0/  0)%
    ethoipOsapiMsgRcv  (240/  7)              0            0      (  0/  0)%
    --More-- or (q)uit
    envCtrollerStatus  (240/  7)              0            0      (  0/  0)%
    rfidTask           (240/  7)              0            0      (  0/  0)%
    idsTrackEventTask  (239/  8)              0            0      (  0/  0)%
    DHCP Server        (240/  7)              0            0      (  0/  0)%
    bcastReceiveTask   (240/  7)              0            0      (  0/  0)%
    ProcessLoggingTask (240/  7)              0            0      (  0/  0)%
    CDP Main           (240/  7)           3100           13      (  0/  0)%
    sntpMainTask       (240/  7)              0            0      (  0/  0)%
    sntpReceiveTask    (240/  7)              0            0      (  0/  0)%
    cdpSocketTask      (240/  7)              0            0      (  0/  0)%
    grouping Task      (255/  1)              0            0      (  0/  0)%
    dot11a             (255/  1)             63            3      (  0/  0)%
    rrm Socket Task    (  1/ 97)          35024            1      (  0/  0)%
    rrm Socket Task    (255/  1)          35024            1      (  0/  0)%
    dot11a             (255/  1)              0            0      (  0/  0)%
    grouping Task      (255/  1)              0            0      (  0/  0)%
    dot11b             (255/  1)            105            5      (  0/  0)%
    rrm Socket Task    (255/  1)          35024            1      (  0/  0)%
    dot11b             (255/  1)              0            0      (  0/  0)%
    rrm Socket Task    (255/  1)          35024            1      (  0/  0)%
    apfPmkCacheTimer   (240/  7)              0            0      (  0/  0)%
    Apf Guest          (240/  7)              0            0      (  0/  0)%
    RLDP Schedule Task (240/  7)              0            0      (  0/  0)%
    --More-- or (q)uit
    apfMsConnTask_5    (175/ 32)              0            0      (  0/  0)%
    apfMsConnTask_4    (175/ 32)              0            0      (  0/  0)%
    apfMsConnTask_6    (175/ 32)              0            0      (  0/  0)%
    apfMsConnTask_7    (175/ 32)              0            0      (  0/  0)%
    apfMsConnTask_3    (175/ 32)              0            0      (  0/  0)%
    apfMsConnTask_2    (175/ 32)              0            0      (  0/  0)%
    apfLbsTask         (240/  7)              0            0      (  0/  0)%
    apfMsConnTask_0    (175/ 32)              0            0      (  0/  0)%
    apfMsConnTask_1    (175/ 32)              0            0      (  0/  0)%
    apfProbeThread     (200/ 22)              0            0      (  0/  0)%
    apfOrphanSocketTas (240/  7)              0            0      (  0/  0)%
    apfRogueDetectorTh (175/ 32)              0            0      (  0/  0)%
    apfRogueTask       (240/  7)              0            0      (  0/  0)%
    apfOpenDtlSocket   (175/ 32)              0            0      (  0/  0)%
    apfRLDP            (175/ 32)            424            1      (  0/  0)%
    apfRLDPRecv        (175/ 32)              0            0      (  0/  0)%
    apfReceiveTask     (175/ 32)              0            0      (  0/  0)%
    mmMfpTask          (175/ 32)              0            0      (  0/  0)%
    mmMobility         (240/  7)           1272            3      (  0/  0)%
    mmSSHPeerRegister  (240/  7)              0            0      (  0/  0)%
    mmListen           (180/ 30)          99920          227      (  0/  0)%
    tplusTransportThre (201/ 22)              0            0      (  0/  0)%
    radiusCoASupportTr (201/ 22)              0            0      (  0/  0)%
    --More-- or (q)uit
    EAP Framework      (240/  7)              0            0      (  0/  0)%
    aaaQueueReader     (225/ 13)           3518           12      (  0/  0)%
    radiusRFC3576Trans (201/ 22)              0            0      (  0/  0)%
    radiusTransportThr (201/ 22)              0            0      (  0/  0)%
    pemReceiveTask     (240/  7)              0            0      (  0/  0)%
    iappSocketTask     (240/  7)              0            0      (  0/  0)%
    ccxRmTask          (230/ 11)              0            0      (  0/  0)%
    ccxS69Task         (240/  7)            424            1      (  0/  0)%
    ccxDiagTask        (240/  7)              0            0      (  0/  0)%
    ccxL2RoamTask      (240/  7)         240424            3      (  0/  0)%
    dot1xSocketTask    (240/  7)              0            0      (  0/  0)%
    Dot1x_NW_MsgTask_7 (240/  7)              0            0      (  0/  0)%
    Dot1x_NW_MsgTask_6 (240/  7)              0            0      (  0/  0)%
    Dot1x_NW_MsgTask_2 (240/  7)              0            0      (  0/  0)%
    Dot1x_NW_MsgTask_3 (240/  7)              0            0      (  0/  0)%
    Dot1x_NW_MsgTask_4 (240/  7)              0            0      (  0/  0)%
    Dot1x_NW_MsgTask_5 (240/  7)              0            0      (  0/  0)%
    Dot1x_NW_MsgTask_1 (240/  7)              0            0      (  0/  0)%
    Dot1x_NW_MsgTask_0 (240/  7)            424            1      (  0/  0)%
    dot1xMsgTask       (240/  7)              0            0      (  0/  0)%
    locpTxServerTask   (220/ 15)            408            2      (  0/  0)%
    locpRxServerTask   (200/ 22)         428043         1961      (  0/  0)%
    capwapSocketTask   ( 72/ 70)         303104          148      (  0/  0)%
    --More-- or (q)uit
    spamApTask6        (118/ 53)          25929           63      (  0/  0)%
    spamApTask7        ( 53/ 78)          24233           59      (  0/  0)%
    spamApTask5        (118/ 53)          23445           61      (  0/  0)%
    spamApTask4        (118/ 53)          23513           58      (  0/  0)%
    spamApTask3        (118/ 53)          19569           48      (  0/  0)%
    spamApTask2        ( 53/ 78)          23809           58      (  0/  0)%
    spamApTask1        ( 53/ 78)          22961           56      (  0/  0)%
    spamApTask0        ( 78/ 68)          39189          106      (  0/  0)%
    spamReceiveTask    (120/ 52)        2204024          252      (  0/  0)%
    spamSocketTask     ( 32/ 85)              0            0      (  0/  0)%
    Image License brok (240/  7)              0            0      (  0/  0)%   I
    Image License brok (240/  7)             28            1      (  0/  0)%   I
    IPC Main Thread    (240/  7)              0            0      (  0/  0)%   I
    License Client Lib (240/  7)             96            1      (  0/  0)%   I
    sshpmLscScepTask   (100/ 60)              0            0      (  0/  0)%
    License Client Lib (240/  7)             96            1      (  0/  0)%   I
    sshpmLscTask       (100/ 60)          25783         1739      (  0/  0)%
    sshpmReceiveTask   (175/ 32)           6697           66      (  0/  0)%
    sshpmMainTask      (100/ 60)         208440          358      (  0/  0)%
    mfpKeyRefreshTask  (255/  1)              0            0      (  0/  0)%
    mfpEventTask       (255/  1)              0            0      (  0/  0)%
    mfpTrapForwardTask (255/  1)              0            0      (  0/  0)%
    clientTroubleShoot (100/ 60)        2841248            4      (  0/  0)%
    --More-- or (q)uit
    loggerMainTask     (200/ 22)              0            0      (  0/  0)%
    debugMainTask      (200/ 22)              0            0      (  0/  0)%
    dot3ad_lac_task    (240/  7)          32901            3      (  0/  0)%
    gccp_t             (240/  7)           5864            5      (  0/  0)%
    dot1dTimer         (240/  7)              0            0      (  0/  0)%   T 300
    dot1dRecv          (250/  3)              0            0      (  0/  0)%
    uart_session       (240/  7)              0            0      (  0/  0)%
    StatsTask          (240/  7)              0            0      (  0/  0)%
    fdbTask            (240/  7)              0            0      (  0/  0)%
    broffu_SocketRecei (100/ 60)             13            1      (  0/  0)%
    SNMPProcMon        (240/  7)              0            0      (  0/  0)%   T 300
    RMONTask           ( 71/ 71)              0            0      (  0/  0)%   I
    SNMPTask           (240/  7)          61089         1064      (  0/  0)%
    DHCP Socket Task   (240/  7)              0            0      (  0/  0)%
    DHCP Proxy Task    (240/  7)              0            0      (  0/  0)%
    dhcpClientTimerTas (240/  7)              0            0      (  0/  0)%
    DHCP Client Task   (240/  7)              0            0      (  0/  0)%   T 600
    BootP              (240/  7)              0            0      (  0/  0)%   T 300
    TransferTask       (240/  7)            848            2      (  0/  0)%   I
    osapiTimer         (100/ 60)          13024            2      (  0/  0)%   T 300
    nim_t              (100/ 60)           2447            3      (  0/  0)%
    dtlArpTask         (  7/ 95)          98436            3      (  0/  0)%
    dtlTask            (100/ 60)          41089           20      (  0/  0)%
    --More-- or (q)uit
    dtlDataLowTask     (  7/ 95)              0            0      (  0/  0)%
    sysapiprintf       (240/  7)          22657            3      (  0/  0)%
    osapiBsnTimer      ( 95/ 62)              0            0      (  0/  0)%
    fp_main_task       (240/  7)       153068796        26868      (  0/  0)%

  • Triger extract is not  working for USERDETAILS object.

    Dear MI experts,
    I am doing custom client integration. In that we have faced a problem.
    Trigger extract is not  working for USERDETAILS object in SWCV SAP BASIS 7.10.
    1. I have assign the SWCV SAP BASIS 7.10, user define SWCV to device.
    2. I have checked the SMQR all queues(extract queues) are in register mode.
    But if I delete the users and reassign the same user, then it is sending deletes and insert to the outbound queue.
    please help to resolve the issue.
    Regards
    lakshman balangu

    Dear ananth,
    Thanks for ur replay.
    Actually as soon as the device is registered, automatically the USERDETAILS and USER_AUTHORIZATION Objects should
    go to the Outbound queue from the pending extract
    I have tried what you have suggested.
    1.I have taken device which is in initial state and I have assigned the 'user' and 'user define SWCV'.
    2.I have register the devices with my custom client. After that also SWCV SAP BASICS 7.10 not become operational and automatic extract not happend for USERDETAILS.
    my doubt is, any thing i need to send from client to make SWCV SAP BASICS 7.10 operational?
    (or) is it problem with system?
    Regards
    lakshman balanagu

  • Spotlight Search is not working with Lion

    I was on 10.6.5 and installed Lion.
    Spotlight searching is not working at all now. I have tried everything in the Spotlight preferences Confidentiality, selecting my hard disk and exclusding it quitting putting it back.
    I waited 3 days to be sure it was not because indexing is not finished.
    I don't know what I can try now..
    I have Time Machine I tried Mac OSX Combo 10,7.3.

    Try this, lauch Terminal and at the prompt copy & paste
    sudo mdutil -i off /
    Press return.
    You'll be prompted for you password, it will be invisible
    Then copy & paste this command
    sudo rm -rf /.Spotlight-V100
    Press return and finally
    sudo mdutil -i on /
    Press return

  • Spotlight search is not working in iphone 6

    Spotlight search is not working. It works only when I reboot the device. Also, it works for 10 to 15 min.Please help

    Try this, lauch Terminal and at the prompt copy & paste
    sudo mdutil -i off /
    Press return.
    You'll be prompted for you password, it will be invisible
    Then copy & paste this command
    sudo rm -rf /.Spotlight-V100
    Press return and finally
    sudo mdutil -i on /
    Press return

  • Export to powerpoint not working for certain views

    Hi All,
    I am in the process of implementation of STVN 2.1 Pre EHP3 version of Nakisa OrgChart for one of my clients.
    During testing, it is observed that export to powerpoint object is not working for the following views.
    1. Condensed Org. Chart
    2. Compressed OrgChart -Only works when we expand at least one position
    3. Horizontal OrgChart - Condensed children-Only works when we expand at least one position
    In all the other views the export to Powerpoint object are working fine.
    Export of powerpoint image is working in all the scenarios. We are facing issue only with powerpoint object.
    I have implemented Export Pack 3.0 for OrgChart.
    J. Thomas

    Hi Luke,
    Thanks for the response.
    Yes...I have installed SP1.0. I have also applied Export Pack 3.0.
    The following features are working fine.
    1) Export to PDF
    2) Export to JPEG
    3) Export to Powerpoint Image.
    Export to Powerpoint Object is also working fine if the style is 'Vertical'. The issue is only in case of 'Condensed', 'Compressed' and 'Horizontal OrgChart - Condensed children' sytles. Here again, if we expand at least one position, the export is working.
    The error message that is flashed for the user is the usual one....pasted below.
    Object Variable or With Blovk Variable Not Set.
    Export To PowerPoint 
    Compatibility 
    We currently support:
    Microsoft PowerPoint 2000 / 2002
    Microsoft PowerPoint 2003
    Note: To ensure compatability, you may be prompted to install "Service Pack 6 for Visual Basic Runtime." If so, you must accept the installation and once installed it may ask for a system reboot which you may ignore. 
    ActiveX Security 
    Depending on your browser settings, you may be prompted to install 'Nakisa Office Components.cab'. This is our ActiveX component that will allow you to use our Exporting functionality.
    You may also be prompted to allow the ActiveX to run. If so, you must select 'Yes' to continue.
    Note: If you are not prompted and the export fails to occur, please verify your Microsoft Office installation and verify your browser's ActiveX settings are set to 'Enable' or 'Prompt'.
    In the log file, the following error message is displayed.
    ERROR: ChartingXMLProcessor : generateLayoutXML : Unexpected XML declaration. The XML declaration must be the first node in the document, and no white space characters are allowed to appear before it. Line 1, position 5081.
    Warm regards,
    J. Thomas

Maybe you are looking for