SPRUNCALCACCOUNT passing scope from script logic

Hi all,
Is it possible to limit the scope of execution of SPRUNCALCACCOUNT (and other business rules calls) in the script logic?
I'd like to run a few consolidation tasks (each for different list of entities) in a row, without propmting users to fill the parameters.
My script is as below, and the *XDIM_MEMBERSET_LEGALENTITY clause does not seem to affect the scope - the account transformation is run for all entities.
*XDIM_MEMBERSET LEGALENTITY = A1004, A0602, A0758
*SELECT (%CURR_SET%, "[ID]", "GROUPS", "CURRENCY_TYPE='R'")
*RUN_STORED_PROCEDURE=SPRunCalcAccount(LegalApp,%CATEGORY_SET%,%CURR_SET%,A)
*Commit
regs,
Mariusz Suminski

Sorry for the slow reply on this one... This question is one that has perplexed me for a long long time, how to unravel the mysteries of the %ScopeTable% parameter.
For my case, I'm trying to dynamically control the time periods which are calculated in SPRunCalcAccount, based on the selected category, and a property value (e.g. Category.FirstPlanMonth) so that the user isn't bothered with selecting time periods when running logic. For a mid-year update category, only July - December is to be calculated.
My solution is a bit involved, but works quite well, as I create my own scope table. A custom stored proc accepts a few parameters, sets up a custom scope table exactly as I like, and then passes that table into the SPRunCalcAccount.
Your stored proc may need to consider some or all of the dimensions of your application, but in my case I'm only concerned with entity/category/time. Here's how I call it from the LGF:
// Generate a random number for use in the table name
*SELECT (%RandomNum%, round(rand()*10000000,0),"TIME","[ID]='YYYY.INPUT'")
*RUN_STORED_PROCEDURE=CustomScopeTableManager([%CATEGORY_SET%],[%ENTITY_SET%],[%TIME_SET%],[Custom_Scope_%RandomNum%],[CREATE])
// Use the new scope table in a business rule.
*RUN_STORED_PROCEDURE=SPRUNCALCACCOUNT([%APP%],[%CATEGORY_SET%],[LC],[Custom_Scope_%RandomNum%],[%Logtable%],[Test])
// Drop the scope table.
*RUN_STORED_PROCEDURE=CustomScopeTableManager([],[],[],[Custom_Scope_%RandomNum%],[DROP])

Similar Messages

Raise an ERROR message from Script logic

Hi All
Here i have developed a custom copy funtion im not using standard copy functionality.
I am trying to copy from working version to another version ex: V01 to V02. I have scoped these two versoins in script logic.
But when user runs DM package for a different version other than v01 and v02 then user has to get the error message.
Can i achive this by including some code in the script logic. i dont want to use the security options on user level.
is there any function to raise error??
Please suggest thanks in advance.
Regards
AK

Hi AK,
As I understood from your question, you want to copy always from V01 to V02. No other versions will be used other than these 2. So, it will be better to have them hardcoded in your script logic, instead of keeping error messages for the user. Anyways, you dont want the user to enter anything other than V01 and V02.
Hope this helps.

Confusing results from script logic

hi,
i have the following script logics :
*lookup finance
*dim valuesales:account="sales"
*dim valuecost:account="cost"
*endlookup
*when lookup(valuesales)
*is>=lookup(valuecost)
*rec(factor=0,account="validation")
*else
*rec(account="validation")
*endwhen
however the results are completely opposite of what i expected. when i did a evsen of 20 to "sales" and 10 to "cost", the result is 30 in "validation"; and when i did a evsen of 10 to "sales" and 20 to "cost", the result is zero in "validation".
any idea?
cheers

All the SQL logic is referencing the data as it's stored in the fact tables (signeddata).
Check your acctype. If the signed value of the sales (INC) is negative, and the cost (EXP) is positive, it may explain this.

How to copy applications using script logic with conditions

Hi,
I have two copy data between application A to application B, but only i want to copy the March's Data of Application A. Dimensions are the same in both applications
I'm going to use this script logic, ¿this script will work?
*WHEN TIME
*IS "2009.MAR"
*DESTINATION_APP=B
Thanks in advance
Regards,
Juan

Hi all,
Finally I solved the issue, the problem was that i haven't add this line in the script logic:
TASK(Execute formulas,USER,%USER%)
But now i need to pass in the script logic as an input: entity and time. Below is the code I prepare, it has no error but it doesn't work. ¿any idea?
Thanks in advance
Regards,
Juan
*SSIS PACKAGE *
'DEBUG(ON)
PROMPT(RADIOBUTTON,%CHECKLCK%,"Select whether to check work status settings when running logic.",1,{"Yes, check for work status settings before running logic","No, do not check work status settings"},{"1","0"})
PROMPT(SELECTINPUT,,,"Please select entity and time to copy data from LegalAppNceu to LegalApp",%ENTITY_DIM%%TIME_DIM%)
TASK(Execute formulas,USER,%USER%)
TASK(Execute formulas,APPSET,%APPSET%)
TASK(Execute formulas,APP,%APP%)
TASK(Execute formulas,LOGICFILE,%APPPATH%..AdminApp%APP%CopyApplication.lgx)TASKTASK(Execute formulas,RUNMODE,1)
TASK(Execute formulas,LOGICMODE,1)
TASK(Execute formulas,CHECKLCK,%CHEKCLCK%)
SCRIPTLOGIC
*DESTINATION_APP=LEGALAPP
*SKIP_DIM= COSTCENTER
*WHEN ENTITY
*IS "%ENTITY_DIM%"
*WHEN TIME_DIM
*IS "%TIME_DIM%"
*REC(FACTOR=1)
*ENDWHEN
*ENDWHEN
*COMMIT

Substring in script logic

Hi,
We have a customer dimension, where we can extract a lot of information. However the information depends on the sales organization.
Since the client currently have 30 sales organization and we can deduct information like: billing currency, sold-to-country and profitcenter from the combination of sales organization and customer this means I have to create 90 properties to hold this information (30 salesorg * 3 informations pr salesorg).
Therefore I would like to concatenate the information in 1 property per sales organization. This however means I have to be able to make a substring on the property, e.g. in a select statement to retreive the relevant information (it is not possible to do it in the report, since the properties hold information I need to save the data).
Does anyone know if this is possible?
Thanks,
Lars

Hi Lars -
Sorry, string manipulation commands are not available in script Logic. You will need to call a BAdI from script logic and use the rich string manipulation tools available in ABAP.
Regards,
Sheldon

Script Logic VS Data Transformation File

Hi all,
   I'm new to SAP BPC. I have knowledge of SAP BW.
   I can see conversion file, which we are referring in data transformation file. which we can use for mapping and conversion of external data into internal data.
How data transformation file different form script logic? Are we going to refer script logis in Data transformation file for each required dimension?
Can any of you give me clarity on how to place script logic and data transformation file in BPC data management flow.
I will really applicate all your help!!!
Thanks
Ben.

Nilanjan,
   I have a another quick question...
suppose my bpc application has 5 dimensions. Out of the 5 dimensions, 4 dimensions data i'm getting directly from SAP BW. assume 1 dim, i need to extract by doing look up at different table which also reside in BW.
   how to populate data for DIM 5.
   I got your point that data transformation file purely for field mapping. suppose DIM5 if i want to populate from script logic, wht do i need map in Transformation file. I hope you got my point.
   My question if how to populate a DIM in BPC using lookup approach.
Thanks,
Ben.

Some script logic commands not supported any longer

Hello, it seems like Prior, *APP(in runallocation), *Name in runallocation...these commands are no longer supported in MS 7.5. I ran the same script logic under MS 5.1 it passes validation in script logic. but in 7.5 it gives error. please advise. thanks.

Hi Tom
I don't see where you define or set value for #TEMP_REV and #TEMP_VIS
something like
*WHEN CATEGORY.FLAG
*IS = Y
*REC(CATEGORY=#TEMP_VIS)
*ELSE
*REC(CATEGORY=#TEMP_REV)
*ENDWHEN
*GO

Java Thread - difficulty while passing value from parent to child thread

Hi All,
I am calling a java program from a unix script .
My oblectives are
1)to pass value from scripts to main java class
2)main class should create a child thread and pass data to child and should return control back to script
3)child thread should run independtly of parent
The calling unix script is part of process and hence should return control back to its calling script immediately.
Findings
1)Without passing data thru setter getter /constructor method to child thread my objectives are met
2)When I pass the data from parent thread to child thread calling unix scripts wait till child thread finishesh its working
call.scr
java Main <list of Arguments>
Main.java
public class Main
             public static void main(String args[]) throws Exception
             String data2="Z";
             String data1=null;
             for(int i=0;i<args.length;i++)
                  data2=data2+","+args;
data1=data2;
Child cu=new Child();
cu.setData(data1);
data2=null;
data1=null;
cu.start();
Child.javaclass Child extends Thread
public String data;
void setData(String data)
this.data=data;
public void run()
----------> processing on data
I think due to passing of data from parent thread to child thread (Inter thread data communication/Inter process communication)
the threads are not working as desired.
Plz anybody can suggest something.....
Thanx.

aschin,
You seem to be confusing Java Threads with Operating System Processes.
If you want you're java program to run in the unix background then you'll need to run it in the unix background. Java (being o/s agnostistic) doesn't provide process manipulation functionality (which would include the ability to throw itself into the background, as a C program can) in the standard API, and it's hard to imagine any third party producing anything as low level as a process controler... so yeah, just start the java program in the background... and you'll need to workout some interprocess communication protocol... named pipes have worked well for me in the past, as they doesn't suffer from the quit same performance issues as real disk files.
Good luck. Keith.

Passing variables from DM to logic script problem (REPLACEPARAM)

Dear All,
I would like to send variables from data manager to a logic script. The script copies values from an account to an other. If I hardcode two accounts in the script, it works fine, but I want to pass these two accounts dynamically from data manager to the script.
My advanced script in DM looks as follows:
PROMPT(SELECTINPUT,%ENTITY_M%,,"Select entity:","ENTITY_DIM")
PROMPT(SELECTINPUT,%SOURCE%,,"Select source account:","ACCOUNT_DIM")
PROMPT(SELECTINPUT,%TARGET%,,"Select target account:","ACCOUNT_DIM")
INFO(%EQU%,=)
INFO(%TAB%,;)
TASK(PROCESS_CHAIN_RUNL,TAB,%TAB%)
TASK(PROCESS_CHAIN_RUNL,EQU,%EQU%)
TASK(PROCESS_CHAIN_RUNL,SUSER,%USER%)
TASK(PROCESS_CHAIN_RUNL,SAPPSET,%APPSET%)
TASK(PROCESS_CHAIN_RUNL,SAPP,%APP%)
TASK(PROCESS_CHAIN_RUNL,SELECTION,%ENTITY_M%)
TASK(PROCESS_CHAIN_RUNL,LOGICFILENAME,ACCOUNT_COPY_LOGIC.LGF)
TASK(PROCESS_CHAIN_RUNL,MEMBERSELECTION,SOURCE%EQU%%SOURCE%%TAB% TARGET%EQU%%TARGET%)
In the logic script, I'm using $SOURCE$ and $TARGET$ as variables, but it seems that only the first of them gets the value from DM, the other one not, and I always get an error message:
Member "$TARGET$" not exist
The second variable doesn't seem to get the value. If I use only one variable, either SOURCE or TARGET, it works fine...
...and I also tried to replace the MEMBERSELECTION statement with a REPLACEPARAM statement:
TASK(PROCESS_CHAIN_RUNL,REPLACEPARAM,SOURCE%EQU%%SOURCE%%TAB% TARGET%EQU%%TARGET%)
This way I got an other error message, saying: "Member .../PrivatePublications/user not exist"
Do you have any idea? How to pass two user selected parameters to a logic script?
Thanks for your help,
A.

Hi CsernusAttila
You cannot use ACCOUNT_DIM with promp SELECT and variable $SOURCE$ because it only works with variable ACCOUNT_SET in your script logic.
instead of you can use TEXT
PROMPT(TEXT,%,ENTITY_M%%,"Select Entity",)
PROMPT(TEXT,%,SOURCE%%,"Select Source",)
PROMPT(TEXT,%,TARGET%%,"Select Target",)
INFO(%EQU%,=)
INFO(%TAB%,;)
TASK(PROCESS_CHAIN_RUNL,TAB,%TAB%)
TASK(PROCESS_CHAIN_RUNL,EQU,%EQU%)
TASK(PROCESS_CHAIN_RUNL,SUSER,%USER%)
TASK(PROCESS_CHAIN_RUNL,SAPPSET,%APPSET%)
TASK(PROCESS_CHAIN_RUNL,SAPP,%APP%)
TASK(PROCESS_CHAIN_RUNL,SELECTION,%SELECTION%)
TASK(PROCESS_CHAIN_RUNL,LOGICFILENAME,ACCOUNT_COPY_LOGIC.LGF)
TASK(PROCESS_CHAIN_RUNL,REPLACEPARAM,SOURCE%EQU%%SOURCE%%TAB% TARGET%EQU%%TARGET%)
or you can modify your script like this
*XDIM_MEMBERSET ACCOUNT=%ACCOUNT_SET%
*XDIM_MEMBERSET ENTITY=%ENTITY_SET%
And your Prompt like this
PROMPT(SELECTINPUT,,,,"%ACCOUNT_DIM%,%ENTITY_DIM%,")
TASK(PROCESS_CHAIN_RUNL,TAB,%TAB%)
TASK(PROCESS_CHAIN_RUNL,EQU,%EQU%)
TASK(PROCESS_CHAIN_RUNL,SUSER,%USER%)
TASK(PROCESS_CHAIN_RUNL,SAPPSET,%APPSET%)
TASK(PROCESS_CHAIN_RUNL,SAPP,%APP%)
TASK(PROCESS_CHAIN_RUNL,SELECTION,%SELECTION%)
TASK(PROCESS_CHAIN_RUNL,LOGICFILENAME,ACCOUNT_COPY_LOGIC.LGF
I hope it helps
Regards!!

[ASK] Get One Row of Property Value From Dimension in Script Logic

Hello, i need help about how to get one row of property value from dimension in script logic.
Let say there is CATEGORY dimension and the members are like this :
ID                                                  YEAR   Status
PLAN_2011                                   2011        A
PLAN_2011_V1                            2011        I
ACTUAL_2011                              2011        I
FORECAST_2011                         2011        I
FORECAST_2011_V1                  2011        A
PLAN_2012                                  2012        A
PLAN_2012_V1                           2012        I
ACTUAL_2012                             2012        I
FORECAST_2012                         2012        I
FORECAST_2012_V1                  2012        A
If i scope CATEGORY like this :
*XDIM_MEMBERSET CATEGORY = [CATEGORY].PROPERTIES("YEAR") = "2011"
Then i will get member scope like this :
PLAN_2011                                   2011        A
PLAN_2011_V1                            2011        I
ACTUAL_2011                              2011        I
FORECAST_2011                         2011        I
FORECAST_2011_V1                  2011        A
Question :
In script logic, how can i read the second record of scope and move it to variable ?
Ex. : I read second record, so i can get the data of second record (PLAN_2011_V1, 2011, A).
Is there any function to read all record that had been scope ? So i can read all those 5 records.
Is there any substring or offset function in script logic ? How to use it ?
Thank you.

Hi,
Firstly, when we scope the logic, it doesnt fetch the entire record from the member sheet. It just fetches the ID.
Secondly, we dont have the feasibility to read only the second ID and skip the others. However, one alternative is that you use the SELECT statement to store all the IDs in a variable, and then use a FOR loop. But this will loop through all the 5 IDs, as per your example. If you want to skip all the IDs except one, you should maintain some property, so that all the IDs are neglected which doesnt have a particular property value.
Hope you got the idea.

Calling multiple script logics from a single package

Team- How do i call multiple script logics from a single DM package...?
I know its possible and have seen a prototype but cant recollect or find it on sdn...
Thanks for your time.
Vishal.

Hi,
You can create a master script logic which will include all the other script logics using the *INCLUDE command and call this master script through your DM package.
Another way is to have multiple tasks in the process chain which is calling a script logic. You can pass separate script logics to each of the tasks.
I would prefer the first option
Hope this helps.

Script fails when passing values from pl/sql to unix variable

Script fails when passing values from pl/sql to unix variable
Dear All,
I am Automating STATSPACK reporting by modifying the sprepins.sql script.
Using DBMS_JOB I take the snap of the database and at the end of the day the cron job creates the statspack report and emails it to me.
I am storing the snapshot ids in the database and when running the report picking up the recent ids(begin snap and end snap).
From the sprepins.sql script
variable bid number;
variable eid number;
begin
select begin_snap into :bid from db_snap;
select end_snap into :eid from db_snap;
end;
This fails with the following error:
DB Name DB Id Instance Inst Num Release Cluster Host
RDMDEVL 3576140228 RDMDEVL 1 9.2.0.4.0 NO ibm-rdm
:ela := ;
ERROR at line 4:
ORA-06550: line 4, column 17:
PLS-00103: Encountered the symbol ";" when expecting one of the following:
( - + case mod new not null <an identifier>
<a double-quoted delimited-identifier> <a bind variable> avg
count current exists max min prior sql stddev sum variance
execute forall merge time timestamp interval date
<a string literal with character set specification>
<a number> <a single-quoted SQL string> pipe
The symbol "null" was substituted for ";" to continue.
ORA-06550: line 6, column 16:
PLS-00103: Encountered the symbol ";" when expecting one of the following:
( - + case mod new not null <an identifier>
<a double-quoted delimited-identifier> <a bind variable> avg
count current exists max min prior sql stddev su
But when I change the select statements below the report runs successfully.
variable bid number;
variable eid number;
begin
select '46' into :bid from db_snap;
select '47' into :eid from db_snap;
end;
Even changing the select statements to:
select TO_CHAR(begin_snap) into :bid from db_snap;
select TO_CHAR(end_snap) into :eid from db_snap;
Does not help.
Please Help.
TIA,
Nischal

Hi,
could it be the begin_ and end_ Colums of your query?
Seems SQL*PLUS hs parsing problems?
try to fetch another column from that table
and see if the error raises again.
Karl

Script logic from BPC 5 in BPC 7.5

Hi,
I am trying to use some script logic from an appset in BPC 5 in BPC 7.5. When I validate the logic in 5 it works fine but in 7.5 I get validation errors.
They relate to properties of dimension elements that are not currently used (neither in 5 nor in 7.5) but could well be used in the future. As an example, this bit generates an error
*WHEN ACCOUNTL.RATETYPE
*IS END,ENDFLOW
I currently do not have an account defined with ratetype END but it is quite possible that there will be one in the future. And END is defined as an element in the RATE dimension.
So, why did BPC 5 accept this and BPC 7.5 does not? And, is there a way around other than defining a dummy element in ACCOUNTL that used ratetype END?
Thanks
Edited by: ArnoldWarhonowicz on Aug 5, 2010 4:06 PM

What I havenoticed is that with the new7.5 Script logic, there are more checks and balances performed during the validation. So, if you have only AVG, ENDRATE on RATETYPE property and no END for any member, yet your logic is calling a set of members with this parameter, the logic fails to validate. I assume the process is checking for a set of END members based on the request. Since they don't exist, the error occurs. But I would request that BPC Support verify the behavior as well.
If you remove END, does the logic validate?
Hope this helps.

From where i can run script logic file.

Dear All,
I am new to BPC.
I have a code for currency translation in my Script logic (Default.lgf).
From where i should run this file. Can any help me.
thanks a lot in advance,
Regards,
Satish.

Typically the Currency rates are stored in the "RATE" application. This application is what the script logic or Business rule will call during the conversion process. The rates are only stored by MONTH and by TYPE in a typical planning application. If you need more granular rate details, then you may need to make you time dimension by weeks or days, or add more "TYPES" that are assigned to ACCOUNTs in th ecorressponding account dimension.
But in a simple planning world, most companies will use a monthly rate, one for an AVG and one for END account types, enter this into the RATE application, and run the Defualt logic on submission of data to compile the FX value. Whne you wish to view the results, make certain that you select the correct REPORTING CURRENCY in the report. Many time users forget that data is "normally" entered to an ENTITY,, the ENTITY defines the currency it assumes data is entered, so the plan is loaded to the "LC" member, and converted to USD; or entered in LC, and converted to RS.
But the RATE application will store all the rates required and you may need to open the INPUT template in that application to load the data at the correct intersections.
Hope this helps.

Send parameter from one script logic to another. SAP BPC 7.5 NW.

Hello!
Before i start, want to apologize for my English.
We work on SAP BPC 7.5 for NetWeaver.
In general, we want to send parameter from one Script logic file to another script logic file.
I will explain why :
1. We have parametr like %C_CATEGORY_SET% (and another four parameter, like groups, currency and etc.) that work on one script(next, i will named it A_Script).
       We will send this parametr from BPC EXCEL (we will create button, then use command MNU_eData_SelectPackage(we also set parameters) and run package that we need, also before we set script for this package by the SAP Guide. We send some data, and this A_Script work good. Everything that we want from this script work correctly. )
2. Next we create another script(B_Script) , and we want use %C_CATEGORY_SET%, but we don't know how use this parametr, if we will just write this parametr on Script Logic, apears error ("C_CATEGORYDATAVALUE" is not assigned to the Data Administrator). We try to solve this problem by using System_Constants.lgf, but we get error.
Code:
*DIM C_CATEGORY          WHAT=%C_CATEGORY_SET%;             WHERE=<<<;                   USING=<<<;    TOTAL=<<<
*DIM C_ENTITY                 WHAT=%ENTITYSET%;                         WHERE=<<<;                  USING=<<<;      TOTAL=<<<
*DIM GROUPS                   WHAT=%GROUPS_SET%;                    WHERE=<<<;                  USING=<<<;     TOTAL=<<<
*DIM RPTCURRENCY         WHAT=%RPTCURRENCY_SET%;         WHERE=<<<;                  USING=<<<;      TOTAL=<<<
*DIM TIME                          WHAT=%TIME_SET%;                          WHERE=<<<;                  USING=<<<;     TOTAL=<<<
If we will change %C_CATEGORY_SET% for ACTUAL, and also change another parameters, script will work, package will run correctly. But we need using parameters, because we didn't exactly what will choose our client.
Our question have BPC Script Logic some kind of Globar Parameter(Variable), that we will set in A_Script, and then use them on B_Script?
How can we define parameter from another script logic, maybe we should send it?
Should we use System_Constants for solving this problem, if yes, how?
Any help will be appreciated
Best Regards,
Erlan Kadraliev
Edited by: Erlan Kadraliev on Feb 8, 2011 4:50 PM
Edited by: Erlan Kadraliev on Feb 8, 2011 4:58 PM
Edited by: Erlan Kadraliev on Feb 8, 2011 4:59 PM

Hi Ethan Jewett
1. About %ENTITYSET% it is normal. Before this line i write :
*SELECT(%ENTITYSET%, "ENTITY", GROUPS, "[ID]=%GROUPS_SET%")
So it is not this problem. %ENTITYSET% just parameter, that i used.
2. Are you running the scripts using the same data manager package? I am running two different package for 2 different Script.
For example aPackage for aScript, and bPackage for bScript.
My questions was how can i send parametr from one script to another, for example i can run another script by using BADi command Runlogic, but how can send parameter that i need to used on another script. I have for example parameter %GROUPS_SET% (CG001) on aScript, but i can't get this parameter on another script, if i write %GROUPS_SET% i will get error ("GROUPSDATAVALUE" is not assigned to the Data Administrator)
OR
Maybe if you will answer for next question, i will be able solve problem , How can i send parameter CG001 (this is %GROUPS_SET%, for example it stay in EXCEL in cell A5) from excel to script logic by running package. Maybe i can get cell value on Dynamic Script Data Management?
My Dynamic Script on bPackage
PROMPT(RADIOBUTTON,%CHECKLCK%,"u0412u044Bu0431u043Eu0440 u0431u0430u0437u043Eu0432u043Eu0433u043E u043Fu043Eu043Au0430u0437u0430u0442u0435u043Bu044F.",1,{"u0412u0441u0435u0433u043E u0410u043Au0442u0438u0432u044B","u0421u043Eu0431u0441u0442u0432u0435u043Du043Du044Bu0439 u043Au0430u043Fu0438u0442u0430u043B","u0412u044Bu0440u0443u0447u043Au0430 u043Eu0442 u0440u0435u0430u043Bu0438u0437u0430u0446u0438u0438","u0414u043Eu0445u043Eu0434 u0434u043E u043Du0430u043Bu043Eu0433u043Eu0431u043Bu0430u0436u0435u043Du0438u044F u043Eu0442 u043Fu0440u043Eu0434u043Eu043Bu0436u0430u044Eu0449u0435u0439 u0434u0435u044Fu0442u0435u043Bu044Cu043Du043Eu0441u0442u0438"},{"BPAST_ALL","BPEQ","BPPROCE","BPOPIN_GO"})
INFO
(%EQU%,=)
INFO
(%TAB%,;)
TASK
(/CPMB/DEFAULT_FORMULAS_LOGIC,SUSER,%USER%)
TASK
(/CPMB/DEFAULT_FORMULAS_LOGIC,SAPPSET,%APPSET%)
TASK
(/CPMB/DEFAULT_FORMULAS_LOGIC,SAPP,%APP%)
TASK
(/CPMB/DEFAULT_FORMULAS_LOGIC,REPLACEPARAM,CHECKLCK%EQU%%CHECKLCK%%TAB%)
TASK
(/CPMB/DEFAULT_FORMULAS_LOGIC,LOGICFILENAME,MYTEST_145.LGF)
Best Regards,
Kadraliev Erlan

SPRUNCALCACCOUNT passing scope from script logic

Similar Messages

Maybe you are looking for