Spry Question
I need to programmatically open a panel on the spry tabbed
panels widget from a link on another page on my site. All my
searching has taken me to the adobe area where utilities are
discussed. It appears that in order to open a particular panel, I
need URL utilities and the SpryURLUtils.js file, which I cannot
find. Can someone point me in the right direction?
ktpardue escribió:
> I need to programmatically open a panel on the spry
tabbed panels widget from a
> link on another page on my site. All my searching has
taken me to the adobe
> area where utilities are discussed. It appears that in
order to open a
> particular panel, I need URL utilities and the
SpryURLUtils.js file, which I
> cannot find. Can someone point me in the right
direction?
>
Sure, this tutorial it's excellent, check it please
http://foundationphp.com/tutorials/spry_url_utils.php
Similar Messages
-
Where do i post Spry questions?
Where do i post Spry questions? Thanks
You can ask here.
"mediastream13" <[email protected]> wrote in
message
news:gfitv8$93a$[email protected]..
> Where do i post Spry questions? Thanks -
Using Dreamweaver cs5 I am in the process of writing a new website. Shoalhavenlife.com (it is live)
At the moment it has a index, contact, about page and a couple of pages for future galleries. (people, places)
All of the above pages are accessed via a horizontal spry menu
If I want to add more pages to my site I have to update the spry menu
How do I do this only once say for example on the index page and get the changes to appear on all my pages?
A simple question to answer for many here but for me well that's another story.
Thanks for your (impending) help?
CheersThanks for the link.
I have printed the pages out and would you believe stuck on item number 2
Position your cursor anywhere inside the menu code, and click <ul#MenuBar1> in the Tag selector at the bottom of the Document window to select the entire menu. Depending on how you created your page, the menu's ID might be different; the important thing is to select the complete menu, plus any other part of the page structure that you want to be part of the include.
I have opened up my index file saved it under another name and am viewing the code but can't select the entire code.
I have a copy of David Powers book Adobe Dreamweaver PHP foundation. I understood none of it and found it too difficult.
Cheers -
SPRY Question - how to return to a SPRY accordian with the appropriate pannel expanded?
I am using a SPRY accordion
http://apoko.abetterplacetobe.org/ChapterDocuments/MeetingMinutes/MeetingMinutesIndex.html )
to control access to a variety of meeting minutes. Each
accordion panel
represents a school year and contains a collection of links
to items within
that school year. By default, the window (i.e. the "index")
opens with the
first panel collection expanded.
When a user clicks on any of the items within a panel
collection on the
"index" page, control passed to a linked "detail" page. I
want the user to
be able to return to the "index" page, with the appropriate
panel collection
expanded, by clicking on the title area (i.e. "Brotherhood
Meeting") on the
"detail" page.
I have placed an anchor tag (i.e. identifying "the year") on
each panel
header on the "index" page and use that relative address as
the return link
from the "detail" page. Control does returns from the
"detail" page to the
appropriate anchor on the "index" page but the panel
collection does not
expand. I have only implements these links on the 1952-1953
and 1953-1954
panel tabs.
How can I get control to return and expand the appropriate
panel tab?http://helpx.adobe.com/x-productkb/global/find-serial-number-student-teacher.html
-
I replaced the navigation I originally did with a spry bar. Works and looks great on a Mac but in IE8 the dropdown and spacing is very different.
link is below, any suggestions?
http://pyosports.com/soccerspry.html
rderNot sure offhand - but there is a separate forum that specifically targets "Spry" issues: http://forums.adobe.com/community/labs/spry
You may have better luck with assistance there (or post in both places)... hope that helps in some way,
Jesse -
CS3 and Spry question - validation
I have a form that is located at
www.salleboise.com/contact.cfm
I'd like to validate the email address, and have warnings
appear after the
box if its wrong. How can I do this so it doesn't shift the
whole table if
the spry warning message appears.
You can see how it operates and hopefully have a suggestion.
Thanks!I haven't worked with the Spry stuff yet, however, it seems
that you need to
account for the size of the message that appears to the right
of the email
address when you first build the form. You would need to
adjust your style
sheet to align things more to the left, then when the message
appears, it
won't "push" things to the left if it already has space to
display on the
right.
"Steve Grosz" <[email protected]> wrote in
message
news:f1t3cj$k4p$[email protected]..
I have a form that is located at
www.salleboise.com/contact.cfm
I'd like to validate the email address, and have warnings
appear after the
box if its wrong. How can I do this so it doesn't shift the
whole table if
the spry warning message appears.
You can see how it operates and hopefully have a suggestion.
Thanks! -
Spry question from within DW CS3
I am using some basic Spry to validate a email address. Page
is at
www.salleboise.com/contact.cfm
I would have thought that Spry wouldn't allow the form to be
submitted if
the validation fails, but it does. In that case, what is the
checkbox in
the properties that says 'submit' used for?Hello,
The ColdFusion dedicated tags cfform and cfinput are
injecting in the final HTML + JS code that is sent to the browser
some code that you don't see when you design the page. When you do
a source view in the browser you can notice that JavaScript files,
functions and functionalities appear in your page but in the CF
source they aren't present.
Unfortunately this injection of code is interfering with the
code from Spry you use. As deejayMK already told you the onsubmit
Spry Validation Widget is overwritten and the validation widgets
are not working. In this situation 2 possible solutions exists:
1. You can give up to the cfform tag usage if you don't use
anything from this tag functionalities and switch back to the
standard <form> tag from HTML.
2. Add to your page a code that will also register back the
Spry Validation Widgets to the form submit event. For this action
you should add an unique id first to your form. Than you'll have to
add bellow all widgets definition in your page and outside the form
tag the following JS code:
<script type="text/javascript">
var theForm = document.getElementById('theFormId');
Spry.Widget.Utils.addEventListener( theForm, "submit",
function(){return Spry.Widget.Form.validate(theForm);}, false);
</script>
Regards,
Cristian MARIN -
When I preview my page in browser, there is a dotted line all
around the spry accordion widget. I've looked through the css and
can't find where that is. Any idea how to eliminate this?Malinki8 wrote:
> When I preview my page in browser, there is a dotted
line all around the spry accordion widget. I've looked through the
css and can't find where that is. Any idea how to eliminate this?
I believe what you're talking about can be fixed by adding
the following line to the .Accordion selector in the
SpryAccordion.css file:
outline:none;
FWIW, you should Spry questions over in the Spry forum as
there are more folks with Spry experience that hang out there:
http://www.adobe.com/cfusion/webforums/forum/categories.cfm?forumid=72&catid=602
Danilo Celic
|
http://blog.extensioneering.com/
| WebAssist Extensioneer
| Adobe Community Expert -
Can i use spry for?????
Here is my problem, I have a couple of different html files and they are all the same except each one is in a different language. What i need to know is there a way i can all of them in one html file.
For example:
i have a english, spanish and korean one of the same html file. At the top is a langauage bar so when someone clicks on one language its keeps the pictures and formats the same but just brings up the new language. The only thing is because of space and requirements constraints i need to have all of that one one html file. Would i use java or php to do this?Is this a Spry question?
To answer you question, you can put them in one file and use PHP to extract the relevant data. Store the language in a session variable and use the if statement to extract the relevant info.
Hope this helps
Ben -
Within one html file divided into Spry-tabs, I set a named
anchor in tab-content <div> of one tab and try to link to it
from within a different tab-content division of the same page.
Doesn't work - just sends me to bottom of division in the which
link is located. Surely this is doable -- Am I missing some simple
point?bob_atlanta wrote:
> Within one html file divided into Spry-tabs, I set a
named anchor in
> tab-content <div> of one tab and try to link to it
from within a different
> tab-content division of the same page. Doesn't work -
just sends me to bottom
> of division in the which link is located. Surely this is
doable -- Am I
> missing some simple point?
You have to know which tab the anchor is within and then you
can show a specific tab. Check out the code on this page:
http://labs.adobe.com/technologies/spry/samples/tabbedpanels/tabbed_panel_unobtrusive.htm
FYI: Spry questions are probably best asked in the Spry
forum:
http://www.adobe.com/cfusion/webforums/forum/categories.cfm?forumid=72&catid=602
Danilo Celic
|
http://blog.extensioneering.com/
| WebAssist Extensioneer
| Adobe Community Expert -
Spry table, vertical grid lines
How do you format a table so the vertical grid lines show up.
I have the roll over effect working for rows in the table, but the
tables are large enough that is can be difficult to follow columns
straight down. I would like black vertical line to appear between
columns.
thanks.If I understand you right, you wish to have spreadsheet type
columns. In that case this is not a Spry question but an HTML and
CSS question.
In CSS the format would look something like:
#mytable th {
text-align: left;
padding: 3px;
font-weight: bold;
border:1px solid #AAA;
background-color: #EFEFEF;
In the above example I am formatting a heading cell.
In IE, if the cell is empty there will be no border, thus it
is best to populate the cell with a space as in ' '.
I hope this helps. -
Absolutely Positioned Spry Elements Disappearing in Firefox
Building a sliding spry element that creates the effect of a tab expanding upwards. Renders perfect in both Safari and Opera9, however in firefox the heading tag and subsequent <a> that controls the effect are visible only for a brief second and the page loads then disappear from view all together.
I turned off css styles in FF and was surprised to find that the 3 spry elements function 100% correctly. This is indicating to me that it is a css error. I remember another time I was trying to use image replacement via display:none and AP html tags where the links became unclickable though still visible.
here is a link to the page:
http://internal.shamanism.com/danceofthedeer/test/default.cfm
rather than post a long list of css styles and html code, ive just attached them to this thread.
I've searched around for a similar issue, but without knowing what is exactly causing this problem its hard to find relevant results.
Any help would be greatly appreciated.
Thanks.ccwd wrote:
> I used Dreamweavers to create a web site with a
horizontal spry menu. The site
> was working fine and still is in Firefox, but in IE the
menu text disappears
> when browsing to some of the page (the text is visible
on roll-over, however).
> I have very limited experience with coding.
For anyone to track down your problem you'll have to post a
link to a live page that exhibits this issue and give detailed
instructions as to how to recreate it. Please include the version
of IE (and platform in case that may make a difference)that is
having this issue.
Also, Spry questions are generally better asked in the Spry
forum:
http://www.adobe.com/cfusion/webforums/forum/categories.cfm?forumid=72&catid=602
Danilo Celic
|
http://blog.extensioneering.com/
| WebAssist Extensioneer
| Adobe Community Expert -
Serverside response for spry rating
first off, where is the best place to post spry questions?
I am building a spry rating widget using the dynamic sample from the spry documentation: http://labs.adobe.com/technologies/spry/articles/rating_overview/index.html
I understand how to send the information to a script.php on the server and processes the data, but I do not know how to retrieve the data from the script. Do i need to generate an xml page?Hi,
the Spry forums are here:
http://www.adobe.com/cfusion/webforums/forum/categories.cfm?forumid=72&catid=602
Cheers,
Günter Schenk
Adobe Community Expert, Dreamweaver -
What makes Spry different from other JS/CSS technologies?
I've been seeing a lot of Spry questions here and have used the widgets myself. But for menus, I use CSS Menu Writer from WebAssist. It used ul and li tags in the markup, or an include, JavaScript for functionality and CSS for styling. Basically, this is much the same as the Spry menu, so what's the difference? Then one could add some sort of animation effect and call it AJAX. I suspect a lot of these terms are interchangeable, or perhaps incorrectly used that way. But Spry seems to stand out as something more specific. Another example is the Accordion. I have used the Spry widget, plus another version that uses jQuery and/or scriptaculous. Again, although it's not the same code but it's still JS and provides the same functionality.
Hi
Spry is a javascript framework developed by Adobe similar to jQuery, (specifically the UI and ajax) but not as comprehensive. You could also use a number of other frameworks such as YUI, or prototype.
The difference between menu writer and a framework, is that a framework is only the 'starting' point' and other features, (such as menu or accordion) must be added to it via separate code, whereas menu writer is complete and self contained and written with for specific function, (a menu).
PZ -
Hello everyone,
Is there a way that inside spry i have links to move to
another tab of that spry?
For example i have 3 tabs A B and C now i want inside the
content of tab A to have links that point and open tab B or C.
Thanksbob_atlanta wrote:
> Within one html file divided into Spry-tabs, I set a
named anchor in
> tab-content <div> of one tab and try to link to it
from within a different
> tab-content division of the same page. Doesn't work -
just sends me to bottom
> of division in the which link is located. Surely this is
doable -- Am I
> missing some simple point?
You have to know which tab the anchor is within and then you
can show a specific tab. Check out the code on this page:
http://labs.adobe.com/technologies/spry/samples/tabbedpanels/tabbed_panel_unobtrusive.htm
FYI: Spry questions are probably best asked in the Spry
forum:
http://www.adobe.com/cfusion/webforums/forum/categories.cfm?forumid=72&catid=602
Danilo Celic
|
http://blog.extensioneering.com/
| WebAssist Extensioneer
| Adobe Community Expert
Maybe you are looking for
-
My App Store keeps crashing and giving me a huge error report
Here is the report Process: App Store [24741] Path: /Applications/App Store.app/Contents/MacOS/App Store Identifier: com.apple.appstore Version: 1.0.2 (63.1) Build Info: Firenze-630100~1 Code Type: X86-64 (N
-
Hp 8500 Office Jet Pro never warned ink was low, how to change this?
We have 2 of these units and prefer to only have the hp printers. Got this printer setup, it seems verbose in asking to register, please register, you must register, you cant print until you register. ok fine lets regsiter then! thats ok youre alr
-
Help with e-mail getting stuck in Mail outbox
I recently ran into a problem where all the e-mails I tried to send in Mail got stuck in my outbox and were not sent. After reading posts on the Apple Support Communities website and doing some troubleshooting of my own within Mail, I reached a solu
-
Is there any significance to the thread "AWT-EventQueue-0"
I just got an exception "java.lang.ArrayIndexOutOfBoundsException: 3" but It didn't give me any lines of code that it said the error was thrown. Its a long program, and I have no Idea where it is so I'll just post the exception: Exception in thread "
-
Imac g4 dropped off home network, other still good
airport (snow) network with g3 ibook, intel imac and g4 imac. g4 was tuned off for couple days and will now not see home wireless network. airport symbol appears gray and it shows up in system profile, so i think it is functioning. in addition, the o