Spryslideshow Basic Upload issues

I am pretty new to using the Spry Widgets so I wil just cut to the chase.
When the site is uploaded I get small dialog boxes that say:
SpryPanelSet.js requires SpryWidget.js !
SpryFadingPanel.js requires SpryPanelSet.js!
SpryImageSlideshow.js requires SpryWidget.js!
SpryPanandZoomPlugin.js requires SpryImageSlideshow.js!
I am assuming that this means that the files are not linking up correctly. However when I change the directory information to match where they are or shorten the <script source =" "> </script> to just include the necessary locations, it still does not work.
and example of this is http://fitci.org/FITCIredo/Index.html
If there is a quick fix that would be great, and I deeply appreciate any help that is provided.

I see that you have fixed it.
Gramps

Similar Messages

Every time I try to upload a video to youtube (or pictures to blog services like tumblr) using Firefox, I cannot upload them unless I use the "basic uploader" function. Why and what can be done?

Every time I try to upload a video to youtube or a pictures to a blog service, such as tumblr, I am unable to do so with the default uploading options (usually something that allows multiple uploads, etc). Instead, I can upload these media using their "basic upload" functions. Why and what can be done?
== URL of affected sites ==
http://www.youtube.com; http://www.tumblr.com

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

I can't upload pictures to Facebook Pages albums with my IPad Mini 3. I've tried safari too and the basic uploader doesn't work. I can add photos to the wall but I need to put them in albums for my Boutique,

I can't upload pictures to Facebook Pages albums with my IPad Mini 3. I've tried safari too and the basic uploader doesn't work. I can add photos to the wall but I need to put them in albums for my Boutiqu

It is peculiar, that Chrome, Safari, and Skype can access FB, but not the iPhoto uploader.
Do you see any error messages/ diagnostics in the Console Window, when you try to connect to Facebook?
Launch a Console window from Applications > Utilities and clear the Console Window. Then try to upload. Are there any new messages?
And also launch a Terminal and have a look, if "facebook.com" is properly resolved:
Type
ping facebook.com
into the window. Do you see any transmissions? What is the IP address used?
I see:
PING facebook.com (173.252.110.27): 56 data bytes
64 bytes from 173.252.110.27: icmp_seq=0 ttl=243 time=110.486 ms
64 bytes from 173.252.110.27: icmp_seq=1 ttl=243 time=109.365 ms
64 bytes from 173.252.110.27: icmp_seq=2 ttl=243 time=110.101 ms
64 bytes from 173.252.110.27: icmp_seq=3 ttl=242 time=109.829 ms
64 bytes from 173.252.110.27: icmp_seq=4 ttl=242 time=111.323 ms
64 bytes from 173.252.110.27: icmp_seq=5 ttl=242 time=110.346 ms
64 bytes from 173.252.110.27: icmp_seq=6 ttl=242 time=110.708 ms
64 bytes from 173.252.110.27: icmp_seq=7 ttl=242 time=112.685 ms
64 bytes from 173.252.110.27: icmp_seq=8 ttl=243 time=124.256 ms
64 bytes from 173.252.110.27: icmp_seq=9 ttl=243 time=112.106 ms
^C
--- facebook.com ping statistics ---
10 packets transmitted, 10 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 109.365/112.120/124.256/4.159 ms
Try the same with "dig":
dig facebook.com
; <<>> DiG 9.8.3-P1 <<>> facebook.com
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 25051
;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0
;; QUESTION SECTION:
;facebook.com. IN A
;; ANSWER SECTION:
facebook.com. 775 IN A 173.252.110.27
;; Query time: 11 msec
can you "ping" facebook?

Uploading issues to other providers than .mac

has anyone had uploading issues to other providers than .mac??

can the names of the pages have spaces in them, or do
i have to change both the file name and the name of
the page?
As the note says, some servers will let you upload files with spaces in their names, and some will not. Names without spaces will always work.
In iWeb, the name you give to a site or page is the same as the name of the folder or file associated with it. So to avoid spaces in folder or file names, you need to omit them in the site and page names, or replace by hyphen or underscore.

LR 4/4.1RC and flickr uploading issues - resolved?

Have the uploading issues between LR 4/4.1RC and flickr been resolved? Waiting on upgrading from LR3, but the forum reports from unhappy flickr users wanting to "downgrade' are making me nervous. Should I wait, just upgrade to 4.0 and leave the RC alone for now?

An update ...
I have discovered that RC2 publishing does seem to be working (for me) but Flickr or LR seems to be objecting ("Invalid at the top level of the document") to specific images possibly relating to the contents of the caption field.
I narrowed down the failure to just one image ... removed its caption... it published, I put the caption back on - "Invalid ..." error came back.
FYI and not sure if relevant - I sometimes put http links in my caption fields.
I would have come back with a more comprehensive test, but it now appears that LR will not communicate with Flickr at all, now saying it cannot contact the Flickr service, so I cannot investigate further yet.
I know a little off the wall here ... but is it conceivable that Flickr itself has locked me out due to "erroneous" or suspicious content? I have never had problems with LR talking to Flickr before today and publishing to SmugMug is still working fine.

Share to YouTube - uploading issues

After messing around with this for the last 2 days... i've come to a few conclusions.. one is... there are some bugs that still need to be worked out with iMovie '08 and the Share to YouTube function.
I made my first iMovie '08 project the other day, and tried uploading it to YouTube. I went through the steps to authorize 3rd Party uploads to YouTube, and everything seemed fine. The upload would get to 100%, the i would get this message...
When i hit OK, nothing else would happen. There was no video on YouTube... nothing.
Someone suggested that i try a few different things, so i made a quick movie clip with Quicktime using my iSight. I dropped that into iMovie, threw a title on it, and tried to upload it to YouTube. It worked. The first files i was working with were originally MPG files from my Sony Cybershot, which i converted with VisualHub to MP4 because iMovie wouldn't recognize them otherwise. So my first thought is there's some issue with encoding, because my new clip was made in Quicktime as a MOV but using MP4 encoding.
Then i though... maybe the file size is too big, but i hadn't received any warning message about it, and i figured that iMovie was sizing it to fit for YouTube. There's the problem... The only warning message iMovie itself gives you before uploading, is if your movie is more than 10mins.
YouTube has 2 restrictions... 1) That your upload is under 10 mins, and... 2) That you movie is under 100mb's.
So... since my movie was under 10 mins it should be fine, but when i exported it to my desktop, and rollover on the "i" it says that my movie 119.5mb's.
This is the problem... iMovie doesn't warn you that your movie might be rejected for being larger than 100mb's, it should.
I made my movie a little longer... so it was over 10 min's to test this, and there's a warning about the length, but not the size.
There are no real options in iMovie for compression or bitrate or anything like this. It would be nice if this share to YouTube window had a slider that you could adjust the bitrate, so that your movie can be reduced slightly to fit just under 10 mins, and under 100mb's, or an automated compression to keep these requirements for YouTube.
Yes of course i can just export to my desktop, and then upload to YouTube directly... but part of the reason i got excited about iMovie '08 was the prospect of being able to just click a few buttons, and upload directly through the program.
*PLEASE FIX THIS APPLE*

Yes of course i can just export to my desktop, and then upload to YouTube directly... but part of the reason i got excited about iMovie '08 was the prospect of being able to just click a few buttons, and upload directly through the program.
Have you considered publishing to YouTube using the "Mobile" setting? Basically, the "Medium" settings uses a 1.7 Mbps data rate target. If the average data rate was exactly 1.7 Mbps then the maximum length you can expect is on the order of 7.8 minutes. (Realistically, however, it is probably a bit more than 8 minutes for the average movie.) On the other hand, the "Mobile" target data rate is only 1.0 Mbps which should guarantee the full 10 minutes every time. Believe you are limited to a combined data rate of about 1333 Kbps to ensure a full 10-minute clip would be acceptable.
Overall, a good analysis of the situation. My hat is off to you. Thanks for posting this little tidbit of information.

Flex Uploading Issue

Hi,
I am having great trouble with Flex and ColdFusion when it
comes to
uploading. I can upload fine to a server with no
authentication set
up but as soon as I start to upload using FileReference and
UrlRequest to a server with authentication from cflogin
problems
occur. Basically it fails silently, it displays progress in
the
upload and that the upload was successful but my files is not
there.
I have check all my scripts and location for the file upload
and it
just aint happening. I have tested a simple cfm upload form
and hit
that fine, uploaded and can write to files also on the remote
server
so I know thats set up fine.
So after much googling I have found that when using
FileReference for
uploading the upload will use a new browser session to upload
the
files and therefore remove all session variables!!! Arrrrggh!
So my
work around has involved grabbing the session.URLToken,
sending that
into my Flex app and then when I call the upload cfm script
pass the
session.URLToken variables in the url string like so:
request = new URLRequest();
chosenFile = fr.name;
request.url = UPLOAD_URL+"?"+sessionVars;
Problem is it still doesnt work?
(a) I dont know if that is enough to satisfy cflogin criteria
i.e. do
I need to set anything in the upload.cfm page to say that
these are
the session variables.
(b) another weird thing is that if it is starting a new
browser
session why am I not presented with my login panel as
requested by my
Application.cfc?
Any one else suffered here or could make a suggestion please
Simon
P.S. I understand this is not an issue in IE only Firefox
(and Safari I have discovered)!

This is most peculiar cos I am definitely not hitting the
server side script (which I thought was due to session clearing)
but may not be then cos I get no error like you state and also my
login window doesn't rear its ugly head. But I DO know for certain,
the server script is not being hit, cos I run a simple write action
to append a log file and that is not even running???
And yeh uploading from a mac os x system. However, it fails
in FireFox on the PC also.
See:
post
91
Check this:
quote:
Through Flash's FileReference and FileReferenceList classes,
you can create a powerful file uploader that allows the user to
upload multiple files with a single form element. But beware:
unless the user happens to be using IE, the upload will use a new
browser session to upload the files. This means that if you require
that a user be authenticated before uploading something (and you
better be), the upload won't work - the request will be forwarded
to the login form, or to wherever your system forwards unauthorized
requests. This is a maddening bug to track down, and there is
nothing you can do to make Flash use the right session. The work
around is to send the session cookie in the url and, on the server
side, use that to override the new (and wrong) session cookie sent
by Flash

Cost center data uploading issue in OKENN transaction

Hi Gurus,
I have uploaded cost center data using LSMW IDOC method. the data uploaded in the CSKS table successfully. after that i have checked for the cost centers in OKENN transaction at standard hierarchy level. but there cost center are not exist under hierarchy level. then i have changed the hierarchy data(KHINR)(for example From SUS2021100 to SUS2021200, ihave changed in KS02.... then the cost displyed under SUS2021200.... again i have changed the hierarchy from SUS2021200 to SUS2021100.... then the cost center displyed under SUS2021100..... But actualy when i have loaded the data using LSMW all the loaded.... but the cost center not displyed under hierarchy.... after manualy chnged the hierarchy data at KS02 transaction.... it is displying.... idon't understand what is the problem.... can anybody solve my issue.... thanks in advance

Hi Gurus,
I am facing the same issue while uploading cost centers through COSMAS01 basic type.
Cost centers are created properly, we can display them with KS02. Every data are loaded correctly, even the standard hierarchy. Into table CSKS, field KHINR for standard hierarchy is populated, nevertheless, we do not find the cost center into the OKEON Tcode.
How could I solve the issue I am facing ?
Thx for your help.
Regards,
Aurelien

Iphone 5 upload issues

I'm having lots of prob uploading pics with my iphone 5. I'm on 3g speed haven't had 4g as yet..idk y..maybe that part is a service prob. Whenever I try uploading pics via FB, instagram, email & text it doesn't work I get a message failure. The only time it works is when I turn the phone off then back on or turn the cellular data off & on.

Settings > General > Reset > Reset Network Settings.
Beyond that, basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
Also, try replacing the SIM and contact the carrier to troubleshoot account/network issues.
If none of the above resolves the issue, take the device to Apple for evaluation and possible replacement.

Multiple cffile upload issues

Hello all. I'm having a little issue with a multiple upload I
am trying to achieve. I've been searching and searching but could
not find an answer, and maybe you guys could help me. Well I'm
doing multiple uploads on a form i created and it's uploading the
file and file name correctly, but it's inserting 6 records
everytime I'm hitting the submit button. Also, I've notice in my
database is when you click the submit button, it's inserting the
same file in one record 6 times, then it creates a new record and
inserts the second file 6 times. I'm going to post the code here,
maybe it's something I'm missing, not sure. Thanks for the help.

dame.cranon wrote:
> Hello all. I'm having a little issue with a multiple
upload I am trying to
> achieve. I've been searching and searching but could not
find an answer, and
> maybe you guys could help me. Well I'm doing multiple
uploads on a form i
> created and it's uploading the file and file name
correctly, but it's inserting
> 6 records everytime I'm hitting the submit button. Also,
I've notice in my
> database is when you click the submit button, it's
inserting the same file in
> one record 6 times, then it creates a new record and
inserts the second file 6
> times. I'm going to post the code here, maybe it's
something I'm missing, not
> sure. Thanks for the help.
>
>
>
> <cfloop index="i" from="1" to="6">
>
> <cfif isDefined("form.upload")>
>
> <cffile action="upload"
> destination="D:\Hosting\streetzmag\dev\crush_images\"
> filefield="pic#i#"
> nameconflict="makeunique"
> result="cffile.pic#i#"
> accept="image/jpeg, image/pjpeg, image/gif" >
>
> 
> <cfquery datasource="mysqlcf_streetzmag"
name="uploaded">
> INSERT INTO Information(firstname,
> lastname,
> email,
> contact_info,
> nickname,
> recent_work,
> hair_color,
> eye_color,
> ethnicity,
> age,
> height,
> measurements,
> pic_1,
> pic_2,
> pic_3,
> pic_4,
> pic_5,
> pic_6
>
>
> )
> VALUES('#FORM.firstname#',
> '#FORM.lastname#',
> '#FORM.email#',
> '#FORM.contact#',
> '#FORM.nickname#',
> '#FORM.work#',
> '#FORM.hair#',
> '#FORM.eye#',
> '#FORM.ethnic#',
> #FORM.age#,
> '#FORM.height#',
> '#FORM.measurements#',
> <cfif isDefined("form.pic#i#") and
evaluate("form.pic#i#") NEQ "">
> <cfqueryparam
value="#CFFILE['pic'&i].SERVERFILE#" cfsqltype="cf_sql_varchar"
> />
> <cfelse>
> NULL
> </cfif>,
>
> <cfif isDefined("form.pic#i#") and
evaluate("form.pic#i#") NEQ "">
> <cfqueryparam
value="#CFFILE['pic'&i].SERVERFILE#" cfsqltype="cf_sql_varchar"
> />
> <cfelse>
> NULL
> </cfif>,
>
> <cfif isDefined("form.pic#i#") and
evaluate("form.pic#i#") NEQ "">
> <cfqueryparam
value="#CFFILE['pic'&i].SERVERFILE#" cfsqltype="cf_sql_varchar"
> />
> <cfelse>
> NULL
> </cfif>,
>
> <cfif isDefined("form.pic#i#") and
evaluate("form.pic#i#") NEQ "">
> <cfqueryparam
value="#CFFILE['pic'&i].SERVERFILE#" cfsqltype="cf_sql_varchar"
> />
> <cfelse>
> NULL
> </cfif>,
>
> <cfif isDefined("form.pic#i#") and
evaluate("form.pic#i#") NEQ "">
> <cfqueryparam
value="#CFFILE['pic'&i].SERVERFILE#" cfsqltype="cf_sql_varchar"
> />
> <cfelse>
> NULL
> </cfif>,
>
> <cfif isDefined("form.pic#i#") and
evaluate("form.pic#i#") NEQ "">
> <cfqueryparam
value="#CFFILE['pic'&i].SERVERFILE#" cfsqltype="cf_sql_varchar"
> />
> <cfelse>
> NULL
> </cfif>
>
> )
> </cfquery>
> </cfif>
> </cfloop>
>
of course it will do everything 6 times since you have your
whole code
wrapped with cfloop from 1 to 6... so the code execution will
happen 6
times... plus your synatx for inserting filenames inside your
query
makes it insert same file 6 times (since the code is inside
one same
cfloop)...
you should separate your code and wrap only the cffile part
in a cfloop:
<cfif isDefined("form.upload")>
<cfloop index="i" from="1" to="6">
<cfif len(trim(form.pic#i#)) gt 0>
<cffile action="upload"
destination="D:\Hosting\streetzmag\dev\crush_images\"
filefield="pic#i#"
nameconflict="makeunique"
result="uploadedpic_#i#"
accept="image/jpeg, image/pjpeg, image/gif" >
</cfif>
</cfloop>

<cfquery datasource="mysqlcf_streetzmag"
name="uploaded">
INSERT INTO Information
(firstname,
lastname,
email,
contact_info,
nickname,
recent_work,
hair_color,
eye_color,
ethnicity,
age,
height,
measurements,
pic_1,
pic_2,
pic_3,
pic_4,
pic_5,
pic_6)
VALUES('#FORM.firstname#',
'#FORM.lastname#',
'#FORM.email#',
'#FORM.contact#',
'#FORM.nickname#',
'#FORM.work#',
'#FORM.hair#',
'#FORM.eye#',
'#FORM.ethnic#',
#FORM.age#,
'#FORM.height#',
'#FORM.measurements#',
<cfloop from="1" to="6" index="x">
<cfif isdefined("uploadedpic_#x#")>
<cfqueryparam value="#evaluate('uploadedpic_' & x)#"
cfsqltype="cf_sql_varchar"/>
<cfelse>
NULL
</cfif>
<cfif x lt 6>,</cfif>
</cfloop>)
</cfquery>
</cfif>
Azadi Saryev
Sabai-dee.com
http://www.sabai-dee.com

APEX 3.1.2 Static File Upload Issues

We are still running on APEX 3.1.2 though we hope to go to 4 very soon.
We had a production problem this past week that is perplexing. I have seen other posts referencing similar issues but no solutions.
We have an application that has several Static File Javascripts (.js). We already ran into the IE Upload bug so we only upload in Mozilla now.
We had changes to one of the .js files (identity.js). I deleted the old file using the Shared Components screen and uploaded the new one. The action was "Successful" but the file was still the old version. We deleted a file of 73 lines of code and uploaded a new version of 28 lines. After successful upload, we still would get the 73 line version . The app was still getting that version too.
I deleted it many times and tried again. I ran scripts to do both the delete and upload. I even deleted the file manually from the FLOWS_FILES table that held it. Still got the old version.
We bounced the server (thinking it was cached somewhere) - still got the old version. Finally, in desperation, I started cloning the app to another app number in another Workspace. Since we use aliases, I thought I could use a clean Workspace and uplad the new file there. This worked but - suddenly the old Workspace started using the correct file.
Is ther some secret cache somewhere that needs to be cleared out? I did not want to start randomly clearing out caches and there is no documentation on this issue.
Is it something about our config - we have Oracle HTTP Server, OC4J, and modplsql for this environment with a 10g database.
Any insight would be appreciated - my manager does not like "it fixed itself magically".

We ruled out the browser caching by trying the app on several other people's PCs.
I am thinking it is being cached somewhere in the APEX server environment but cannot find any documentation on where or what that might be.
I think I might have triggered a refresh when I was trying to implement a cloned version (in a different Workspace). It seems that the scope of a JS file is within its Workspace so we figured that a new Workspace would treat the changed file as a new file - and it did. During this process, we had duplicate ALIAS for a minute and I think that confused the APEX App Engine and triggered the refresh.
But that is a SWAG opinion.
I also thought of "versioning" the JS files but our developers are not too keen. If we don't find another solution, that may be what we have to do.

File Upload issue in MVC

Hi,
For my MVC application, I have created a main controller.
On the DO_REQUEST of the main controller, I am setting the sub controllers, and directly calling that controller using create_controller, controller_set_active, and call_controller.
I included dispatch_input( ) in the Main controller's DO_REQUEST method.
Inside the DO_REQUEST of the sub controller, I am creating a view using create_view and call_view methods.
In this view, I have a <htmlb:tableView /> and a <htmlb:fileUpload />, with a button. The issue is that, when the button is clicked, in the DO_HANDLE_EVENT method of the sub-controller, I am not getting the File Data, or the table data.
For File upload, I use the following -
data lv_fupld_data TYPE REF TO cl_htmlb_fileupload.
lv_fupld_data ?= cl_htmlb_manager=>get_data(
                      request = runtime->server->request
                      name    = 'fileupload'
                      id      = 'fupld_1').
I have the <htmlb:form method       = "post"
                  encodingType = "multipart/form-data" > etc in the view.
When I call this sub-controller directly from the browser (after including the dispatch_input( ) part in DO_REQUEST), I do not get any issue. I am able to read the file data and upload the file.
Any Idea why this is happening?

Hi Rakesh,
I think I got your problem:
You only have the htmlb:form in your view of the subcontroller, and not in the main view.
Therefore the subcontroller works by itself, but not within the main controller.
If you are including subcontrollers, then make sure the form element is only present in the view of the main controller, wrapping around any subcontroller calls. And don't use the form tag anymore in the subcontrollers.
Just as you put dispatch_input() just in your top controller, also place htmlb:form only in your top view.
Regards,
Max

Lock Box Uploading Issue

Hi,
When i upload BAI file into Lock Box...I am getting the below error in FBL2 transaction.
Accounts receivable posting Error: (F5 102) Customer * is not defined in company code 1000
After that when i see in to FBL1,I am getting the below error.
Payment Advise item doesnot exist
Payment advice 010000007500001 does not exist for account 9372 1000
Message no. FA006
Kindly help me what is the problem and why i am not able to upload it successfully?
Thanks
Kishore

I am experiencing the same issue.
I am wondering how you went about in correcting this issue
Thanks

Metadata upload issue in PI 7.4 Java stack

Hello All,
I need your help.
We are using PI 7.4 single stack and for one Idoc scenario, we wanted to upload idoc metadata from ECC system with Version 4.6.
we are facing Error : IDOC_ERROR_METADATA_UNAVAILABLE. We have successfull connection in place because we can successfully upload other standard Idoc metadata from same ECC, but issue is only with custom Idoc
Kindly suggest how to proceed further.
Thanks,
Shiv

Hello All,
Small update here, here now we have uploaded metadata successfully but when idocs are sent from ECC(its unicode system ), they are failing in tRFC queue of ECC system with error " IDOC_ERROR_METADATA_UNAVAILABLE.". and i have implemented below notes as well but seem no luck .
sap notes 1767710 ,1473183 ,1529038 & 1405466.
I have gone through
SAP ECC-SM58 Error-IDOC Metadata unavailable
Thanks,
Shiv

File upload - issue with European .csv file format

All,
when uploading the .csv file for "Due List for Planned Receipts" in the File Transfer Upload center I receive an error. It appears that it is due to the european .csv file format that is delimited by semicolon rather than comma. The only way I could solve this issue is to change Regional and Language options to English. However, I don't think this is a great solution as I can't ask all our suppliers to change their settings. Has anyone come across this issue and another way of solving it?
Thank you!
Have a good day,
Johanna

Igor thank you for your suggestion.
I found this SAP note:
+If you download a file, and the formatting of the CSV file is faulty, it is possible that your column separator does not match the standard settings of the SAP system. In the standard SAP system, the separator is ,.
To ensure that the formatting is correct, set your global default for column separation in your system, so that it matches that of the SAP system you are using.+
To do that Microsoft suggests to change the "List separator" in the Regional and Language Options Customize view. Though like you suggest that does not seem to do the trick. Am I missing something?
However, if I change the whole setting from say German to English (UK) the .csv files are comma delimited and can be easily uploaded. Was hoping there would be another way of solving this without need for custom development.

Spryslideshow Basic Upload issues

Similar Messages

Maybe you are looking for