SQ01 - Join of different tables or ABAP Code in SAP Query

Hello,
I am trying to link some TO tables LTAK and LTAP together with the header table of the production orders AFKO.
It seems that the SQ01 won't let me joint the LT* and the AFKO table.
But I need to read some values from the AFKO table according to the transfer orders apart from the production order number.
Is there a way in QUERY to join this or can I add somewhere in the query a little ABAP code?
My aim is to avoid writing a ABAP report due to various reason.
Any help would be nice.
Cheers
Uwe Neumann

Hello,
thanx for your answers so far.
I was able to join in the third table.
After a little investigation, I found out that I have to join the table AFPO with the materialnumber instead of AFKO, because the components are in AFPO.
But this is just the one side of the material.
Let's assume the transfer order contains of material A and B and we have production order 111.
If I would let run the query, it would select all material A and B in table AFKO, because I have not said, just look for material A and B for production order 111. As I cannot join the field AFPO-AUFNR with LTAK-BENUM this is missing.
Where can I specify this?
Best regards
Uwe Neumann

Similar Messages

Adding the ABAP code to SAP Query to support Query's ALV Double click.

Hi, Expert.
I need to add some ABAP Code into SAP Query (or Infoset) to support the double click event on ALV cell of result of query.
Is it possible & How to do ?
Thank you very much.
Best Regard
Nattapash C.

Hi, Gautham.
I've put BREAK-POINT in all code section e.g. INITIALIZATION, END-OF-SELECTION..
I found there are some section for add code that will be executed when query is processing before output data to ALV.
What I need to know is Where I can input the code after ALV output. For support the Double Click Event on Query's ALV cell.
Best Regard,
Nattapash C.

How to make joins using different tables depending on inputs? Dynamic Query

Hi,
I have this situation:
- A form with a few input messages;
- Each input corresponds to a table on a DB;
- A user can search for information filling any input, one or more;
- With the inputs filled I have to dynamic create the query, execute it and show the returned lines on a table.
How I am supposed to do that? What is the right way to make it? Can I alter a VO query on runtime including from arguments?
Any light would be apreciate!
Thanks,
Marcelo

You can make View Object with Dynamic Select Statement.
See the detailed instructions in the
oracle.apps.fnd.framework.server.OAViewDef Javadoc for creating a thread-specific view instance at Run time.

How to join THREE different tables into internal table using one select statement .

How to join THREE different tables into internal table using one select statement .
Hi experts,
I would like to request your guidance in solving the problem of joining the data from three different database tables into one internal table
Scenario:
Database tables:
SPFLI
SFLIGHT
SBOOK.
Table Fields:
SPFLI - CARRID CONNID COUNTRYFR CITYFRM COUNTRYTO CITYTO
SFLIGHT - CARRID CONNID FLDATE SEATSMAX SEATSOCC SEATSMAX_C
SEATSOCC_C SEATSMAX_F SEATSOCC_F
SBOOK - CARRID CONNID CLASS
MY INTERNAL TABLE IS IT_XX.
Your help much appreciated.
Thanks in advance.
Pawan.

Hi Pawan,
please check below codes. hope it can help you.
TYPES: BEGIN OF ty_xx,
        carrid     TYPE spfli-carrid   ,
        connid     TYPE spfli-connid   ,
        countryfr TYPE spfli-countryfr,
        cityfrom   TYPE spfli-cityfrom ,
        countryto TYPE spfli-countryto,
        cityto     TYPE spfli-cityto   ,
        fldate     TYPE sflight-fldate ,
        seatsmax   TYPE sflight-seatsmax ,
        seatsocc   TYPE sflight-seatsocc ,
        seatsmax_b TYPE sflight-seatsmax_b,
        seatsocc_b TYPE sflight-seatsocc_b,
        seatsmax_f TYPE sflight-seatsmax_f,
        seatsocc_f TYPE sflight-seatsocc_f,
        class      TYPE sbook-class,
      END OF ty_xx,
      t_xx TYPE STANDARD TABLE OF ty_xx.
DATA: it_xx TYPE t_xx.
SELECT spfli~carrid
       spfli~connid
       spfli~countryfr
       spfli~cityfrom
       spfli~countryto
       spfli~cityto
       sflight~fldate
       sflight~seatsmax
       sflight~seatsocc
       sflight~seatsmax_b
       sflight~seatsocc_b
       sflight~seatsmax_f
       sflight~seatsocc_f
       sbook~class
INTO TABLE it_xx
FROM spfli INNER JOIN sflight
ON spfli~carrid = sflight~carrid
AND spfli~connid = sflight~connid
INNER JOIN sbook
ON spfli~carrid = sbook~carrid
AND spfli~connid = sbook~connid.
Thanks,
Yawa

How to transfer data in change log table of dso to z-table using abap code

Hi can you please explain me how to transfer data in change log table of dso to z-table using abap code ,with out using Function module concept

PROGRAM NAME:   ZBW_DELTA_TO_GSTAR                                 **
report ZBW_DELTA_TO_GSTAR no standard page heading
                                 line-size 120
                                 line-count 75
                                 message-id ZBW_MSG_CLS.
tables:   ZGIV_DLTA_EBV_BB,
          ZGIV_DLTA_EM2_BL,
          ZGIV_DLTA_EM2_BK.
Selection Screen Definitions
SELECTION-SCREEN: BEGIN OF BLOCK INNER WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN: SKIP 1.
PARAMETERS:       EBVBB RADIOBUTTON GROUP ROLL,
                  EM2BL RADIOBUTTON GROUP ROLL,
                  EM2BK RADIOBUTTON GROUP ROLL.
SELECTION-SCREEN: END OF BLOCK INNER.
Data: WS_UPDATE_FLAG Type C,
       UCounter(9)      Type N,
       ICounter(9)      Type N.
DATA: T_ZGIV_DLTA_EBV_BB Type Standard Table of ZGIV_DLTA_EBV_BB,
       s_ZGIV_DLTA_EBV_BB LIKE line of T_ZGIV_DLTA_EBV_BB.
DATA: T_ZGIV_DLTA_EM2_BK Type Standard Table of ZGIV_DLTA_EM2_BK,
       s_ZGIV_DLTA_EM2_BK LIKE line of T_ZGIV_DLTA_EM2_BK.
DATA: T_ZGIV_DLTA_EM2_BL Type Standard Table of ZGIV_DLTA_EM2_BL,
       s_ZGIV_DLTA_EM2_BL LIKE line of T_ZGIV_DLTA_EM2_BL.
Standard Internal Tables - Describe usage.
data: begin of i_AEPSD_O0140 occurs 0.
        include structure /BIC/AEPSD_O0140.
data: end of i_AEPSD_O0140.
data: begin of i_AEPSD_O0240 occurs 0.
        include structure /BIC/AEPSD_O0240.
data: end of i_AEPSD_O0240.
data: begin of i_AEPSD_O0340 occurs 0.
        include structure /BIC/AEPSD_O0340.
data: end of i_AEPSD_O0340.
data: begin of i_GIV_DLTA_EBV_BB occurs 0.
        include structure ZGIV_DLTA_EBV_BB.
data: end of i_GIV_DLTA_EBV_BB.
data: begin of i_GIV_DLTA_EM2_BK occurs 0.
        include structure ZGIV_DLTA_EM2_BK.
data: end of i_GIV_DLTA_EM2_BK.
data: begin of i_GIV_DLTA_EM2_BL occurs 0.
        include structure ZGIV_DLTA_EM2_BL.
data: end of i_GIV_DLTA_EM2_BL.
Miscellaneous Program Variables and Constants.
TOP-OF-PAGE
top-of-page.
START-OF-SELECTION
start-of-selection.
Clear: i_GIV_DLTA_EBV_BB,
         i_GIV_DLTA_EM2_BK,
         i_GIV_DLTA_EM2_BL,
         UCounter, ICounter.
IF EBVBB = 'X'.
    PERFORM 100_EXTRACT_EBV_BB_DELTA_RECS.
ELSEIF EM2BK = 'X'.
    PERFORM 100_EXTRACT_EM2_BK_DELTA_RECS.
ELSE.
    PERFORM 100_EXTRACT_EM2_BL_DELTA_RECS.
ENDIF.
FORM 100_EXTRACT_EBV_BB_DELTA_RECS
FORM 100_EXTRACT_EBV_BB_DELTA_RECS.
Refresh:   i_AEPSD_O0140,
             i_GIV_DLTA_EBV_BB.
Clear:      UCounter, ICounter, s_ZGIV_DLTA_EBV_BB .
Select * From /BIC/AEPSD_O0140
    Into TABLE i_AEPSD_O0140.
IF SY-Subrc = 0.
    LOOP AT i_AEPSD_O0140.
      MOVE-CORRESPONDING i_AEPSD_O0140 TO s_ZGIV_DLTA_EBV_BB.
      MOVE SY-DATUM to s_ZGIV_DLTA_EBV_BB-create_dt.
      INSERT ZGIV_DLTA_EBV_BB FROM s_ZGIV_DLTA_EBV_BB.
      IF SY-Subrc = 0.
        ICounter = ICounter + 1.
      ELSE.
        UPDATE ZGIV_DLTA_EBV_BB FROM s_ZGIV_DLTA_EBV_BB.
        IF SY-Subrc = 0.
          UCounter = UCounter + 1.
        ELSE.
          Message E067 with SY-DATUM ' ' SY-UZEIT ' '.
        ENDIF.
      ENDIF.
    ENDLOOP.
ENDIF.
ENDFORM.                    "100_EXTRACT_EBV_BB_DELTA_RECS
FORM 100_EXTRACT_EM2_BK_DELTA_RECS
FORM 100_EXTRACT_EM2_BK_DELTA_RECS.
Refresh:   i_AEPSD_O0240,
           i_GIV_DLTA_EM2_BK.
Clear:      UCounter, ICounter, s_ZGIV_DLTA_EM2_BK .
Select * From /BIC/AEPSD_O0240
    Into TABLE i_AEPSD_O0240.
IF SY-Subrc = 0.
    LOOP AT i_AEPSD_O0240.
      MOVE-CORRESPONDING i_AEPSD_O0240 TO s_ZGIV_DLTA_EM2_BK.
      MOVE SY-DATUM to s_ZGIV_DLTA_EM2_BK-create_dt.
        INSERT ZGIV_DLTA_EM2_BK FROM s_ZGIV_DLTA_EM2_BK.
      IF SY-Subrc = 0.
        ICounter = ICounter + 1.
      ELSE.
        UPDATE ZGIV_DLTA_EM2_BK FROM s_ZGIV_DLTA_EM2_BK.
        IF SY-Subrc = 0.
          UCounter = UCounter + 1.
        ELSE.
          Message E067 with SY-DATUM ' ' SY-UZEIT ' '.
        ENDIF.
      ENDIF.
    ENDLOOP.
ENDIF.
ENDFORM.                    "100_EXTRACT_EM2_BK_DELTA_RECS
FORM 100_EXTRACT_EM2_BL_DELTA_RECS
FORM 100_EXTRACT_EM2_BL_DELTA_RECS.
Refresh:   i_AEPSD_O0340,
           i_GIV_DLTA_EM2_BL.
Clear:      UCounter, ICounter, s_ZGIV_DLTA_EM2_BL .
Select * From /BIC/AEPSD_O0340
    Into TABLE i_AEPSD_O0340.
IF SY-Subrc = 0.
    LOOP AT i_AEPSD_O0340.
      MOVE-CORRESPONDING i_AEPSD_O0340 TO s_ZGIV_DLTA_EM2_BL.
      MOVE SY-DATUM to s_ZGIV_DLTA_EM2_BL-create_dt.
        INSERT ZGIV_DLTA_EM2_BL FROM s_ZGIV_DLTA_EM2_BL.
      IF SY-Subrc = 0.
        ICounter = ICounter + 1.
      ELSE.
        UPDATE ZGIV_DLTA_EM2_BL FROM s_ZGIV_DLTA_EM2_BL.
        IF SY-Subrc = 0.
          UCounter = UCounter + 1.
        ELSE.
          Message E067 with SY-DATUM ' ' SY-UZEIT ' '.
        ENDIF.
      ENDIF.
    ENDLOOP.
ENDIF.
ENDFORM.                    "100_EXTRACT_EM2_BL_DELTA_RECS
END-OF-SELECTION
end-of-selection.
perform D1000_REPORT_DATA.
D1000_REPORT_DATA
form D1000_REPORT_DATA.
*Display the title of the program
write: /25 SY-TITLE.
skip.
Diaplay the details of the user and time
write: /1 'Executed by', 15 SY-UNAME, 30 'Date',
38 SY-DATUM, 53 'Time', 60 SY-UZEIT.
skip 2.
write: / 'Delta Records have been extracted ',
         /   'Updates : ', UCounter,
         /   'Inserts : ', ICounter.
skip.
skip 3.
write: /20 'End of the report'.
endform.                                           "D1000_REPORT_DATA
chgeck it out this also may hep you

How to extract data from info cube into an internal table using ABAP code

HI
Can Anyone plz suggest me
How to extract data from info cube into an internal table using ABAP code like BAPI's or function modules.
Thankx in advance
regds
AJAY

HI Dinesh,
Thankq for ur reply
but i ahve already tried to use the function module.
When I try to Use the function module RSDRI_INFOPOV_READ
I get an information message "ERROR GENERATION TEST FRAME".
can U plz tell me what could be the problem
Bye
AJAY

Can we join two totals tables in ABAP Query

Hey Gurus!
Can we join two totals tables in ABAP query.
I am tyring to join FAGFLEXT with internal orders totals table.
Thanks
S

Hi,
Report painter majorily operates around characteristics and key figures.
ABAP query comes even more handy. The advantage is -
1. You can link many tables
2. Create selection screen as you like to have
3. User friendly report creation
4. Logic can also be coded.
5. Authorization can be set
I have written a article in SDN, which gives you an idea as to how to go about using ABAP query. Have a look on this - [Article - Practical Usage of ABAP Query|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20f6b256-23be-2b10-8b93-cad83a617634]
Regards,
Sridevi

Is it possible to write an abap code be SAP SQL query.(ECC 6)

hello guys,
Is it possible to write an abap code be SAP SQL query.
Scenario : table A has a field say f1 of length 10 and table B has a field say s1 of lenght 20. in sap sql i am able to link all the other tables but i am not able to link
table Af1 --->Table Bs1. as the length doesnot match. so is it possibel that using abap code I can pick 10 characters from table A field f1 adjust it to 20 characters using abap and map it to field s1 of table B.
Please let me know how to accomplish this if possible.
thanks in advance!!

Herm,
Adding code is done in the infoset.
Please do following:
> Goto SQ02
> Type in the infoset that the basis for your query, <change>
> Press <code> OR <shift><f8>
> Tou'll see 4 tabs: Extras, Selections, Code, Enhancements.
> GoTo tab Code
> Choose the coding section (<f4> gives you an overview)
> Enter the code.
You may set a breakpoint to see what the query in SQ01 will do with it.
Succes!
Frank

Abap code for sap exit variables?

Hi,
i) Where can I find the abap code for SAP exit variables
OP_KEYDT used for the net due date
OP_KEYD2 used for the posting date
OP_KEYD3 used for the clearing date, which are used in FI AR aging report(0FIAR_C03).
Based on the Net Due Date, which is key date(0NETDUEDATE), entered by the user at runtime, the posting date and celaring date are populated.
II) The problem is we want to simulate a similar scenario, but with key date, which user enters is based on the custom Net Due Date(ZNETDUEDATE).And this date is populated to posting date and clearing date variables.
How do we acheive that.
Thanks.

Please tell how u solved ur issue i have the same scenario to be do.

ABAP Code for SAP exit varaibles?

Hi,
i) Where can I find the abap code for SAP exit variables
OP_KEYDT used for the net due date
OP_KEYD2 used for the posting date
OP_KEYD3 used for the clearing date, which are used in FI AR aging report(0FIAR_C03).
Based on the Net Due Date, which is key date(0NETDUEDATE), entered by the user at runtime, the posting date and celaring date are populated.
II) The problem is we want to simulate a similar scenario, but with key date, which user enters is based on the custom Net Due Date(ZNETDUEDATE).And this date is populated to posting date and clearing date variables.
How do we acheive that.
Thanks.

Hi Kumar,
Try this below mentioned example where default date is current date.
Step1: Create a variable(ex: cur_date) on requrired characteristic with Processing type "Customer Eixt" and check the check box for ready for input(if this variable need in selection screen).
Step 2: Goto T Code : CMOD and provide appropriate Project and choose components and click on display.
Step3: Double click on exit "EXIT_SAPLRRS0_001" you can see include "ZXRSRU01", double click on include.
Step4: Sample code to populate.
WHEN 'CUR_DATE'.
Data : l_p_range_SSS TYPE rrrangesid.
IF I_STEP = 1.
l_p_range_SSS-Low = sy-datum.
l_p_range_SSS-Sign = 'I'.
l_p_range_SSS-Opt = 'EQ'.
APPEND l_p_range_SSS TO e_t_range.
Endif.
The following values are valid for I_STEP:
· I_STEP = 1
Call up takes place directly before variable entry
· I_STEP = 2
Call up takes place directly after variable entry. This step is only started up when the same variable could not be filled at I_STEP=1.
· I_STEP = 3
In this call up, you can check the values of the variables. Triggering an exception (RAISE) causes the variable screen to appear once more. Afterwards, I_STEP=2 is also called up again.
· I_STEP = 0
The enhancement is not called from the variable screen. The call up can come from the authorization check or from the Monitor.
Also, refer this link..
http://help.sap.com/saphelp_bw320/helpdata/en/1d/ca10d858c2e949ba4a152c44f8128a/content.htm
Cheers,
Allen

ABAP Reports and SAP Query

Hi Experts,
I have question regarding ABAP Reports, SAP Query, and Transaction with variant. How are we securing one the above reports that we assign them through pfcg. We can secure custom program by custom transaction or define the auth group in S_PROGRAM auth object but in this case we have to assign SA38 in production. is that correct?
Please help me understand difference between the ABAP reports and SAP query. Is the ABAP reports same as Program or they are different.
Thanks in advance
Faisal
Edited by: Faisal on Jun 30, 2009 11:06 PM

Hi,
1) End user security (role matrix coordinate with process team)
This role Matrix design is most important where we can put restrictions and use SoD.
2) Secure Table (by auth group)
Table TDDAT and use of transaction se54 for security tables to right auth Groups. Secure s_tabu_dis, s_tabu_cli.
3) Secure program (as you said ABAP reports are referred to Program)
Use of table TPGP and program RSCSAUTH for assignment of groups to Program. SA38 Running of SA38 requires a minimum SUBMIT in user Action. A user having SA38 is dangerous as he/she is now enabled to run any report. Hence protection in Auth Group is needed. Verify each and every program is having authority check statement and Auth Group or not before assigning sa38. As you mentioned its best to avoid SA38 and create CUSTOM TXN for each report.
(We should also SECURE S_DEVELOP in Production properly along with ur points. Please Note).
4) Secure some batch jobs roles for batch job
Secure by s_btch* objects and less access to se36.
5) Create support roles for cutover activity during Go-live
That is always needed. Go ahead.
6) Emergency roles & IT roles for support
This is very much needed as a role of Mitigation and Fire Fighting for Temporary access. Ensure to enable ur audit parameters in RZ10 (rsau* sm20,RSLG* for sm21). Give emergency access but enable audit via sm19 and get audit reports from sm20 and sm21 immediately after the use of emergency access.
There are also other auth objects we need to be care ful which is a long list and hope every body ensures that (s_cts,a_admi,s_trans, tables ssm_cust, prgn,t000) etc and a host of others. Besh wishes. Let us know if any issue.
Regards
Aveek.

Transaction code for SAP query reports

Hi All,
I am trying to create transaction code for sap query report but couldn't go further.
1) Created User group in SQ03
2) Created infoset in SQ03 and assigned that to the user group
3) Created query in SQ01 using the infoset.
I executed the report in SQ01 and it is working fine.
Now I try to create a transaction code in SE93 using the steps mentioned in the following link:
Assign transaction code to SAP Query (created via SQ01)
But when try to execute the report using the transaction code, it is giving error message 'User group xxxxxx is not yet created'
Could any one advice me if I miss something? Or please help me to create this transaction code and transport to production?
Thanks in advance

HI,
based on the thread you've already mentioned:
In SE93, Create a Paramter Transaction
-> Transaction = Start_report
-> In default values, give the below details:
D_SREPOVARI-REPORTTYPE = AQ
D_SREPOVARI-EXTDREPORT = Name of the Query
D_SREPOVARI-REPORT = User Group
So check if the user group is typed correct in SE93 and check also if the user group exits in the system where you are trying to run the transaction.
best regards, Christian

SQ01 DIsplay Problem (Can v write abap code ) Sql Query

Hi
Need help in SQL Query
I generated one sql query which has the following output in general .
Customer   name   description   amount
asrq1 sharekhan      Amount payed      10
asrq1 sharekhan     Amount Advance     20
asrq1 sharekhan    Amount due             30
but i need the output in the following way
Customer name AMount payed     Amount Advance                  Amount Due
asrq1   sharekhan 10    20     30
and iam new this sql query but came to know we can write code ..but iam unable to initiliaze to write
a peace of code as i dont know what are the select-options defined ..i saw in the include but didnt got it
% comes prefix of select-options,and iam unable to get he internal table which is displayed in the query .
can anyone help me in this answers will be awarded points.

First, I will suggest to go for ABAP report for this kinda requirement.
If you really want to go for it through SQ01, even then you will have to write some ABAP to display the records in one row. You will need to create three custom fields.
I will give Psudo for one field:
Field Name := ZAmountPayed
Select Amount_Payed into varAmountPayed from Table Where Emp# = '12345'
ZAmountPayed := varAmountPayed
Convert the above into relative ABAP code and create 2 more similar fields, and you should be all set.
You have to know the table names and any other calculations to get the right data.

How to join 5 different tables using SQL to make it to a flat file structur

I am trying to load five differnt tables into one flat file structure table without cartesian product.
I have five different tables Jobplan, Jobtask(JT), Joblabor(JL), Jobmaterial(JM) and Jpsequence(JS) and the target table as has all the five tables as one table.
The data i have here is something like this.
jobplan = 1record
jobtask = 5 records
joblabor = 2 records
jobmaterial = 1 record
jpsequence = 3 records
The output has to be like this.
JPNUM     DESCRIPTION     LOCATION     JT_JPNUM     JT_TASK     JL_JPNUM     JL_labor     JM_JPNUM     JM_MATERIAL     JS_JPNUM     JS_SEQUENCE
1001     Test Jobplan     USA     NULL     NULL     NULL     NULL     NULL     NULL     NULL     NULL
1001     Test Jobplan     USA     1001     10     NULL     NULL     NULL     NULL     NULL     NULL
1001     Test Jobplan     USA     1001     20     NULL     NULL     NULL     NULL     NULL     NULL
1001     Test Jobplan     USA     1001     30     NULL     NULL     NULL     NULL     NULL     NULL
1001     Test Jobplan     USA     1001     40     NULL     NULL     NULL     NULL     NULL     NULL
1001     Test Jobplan     USA     1001     50     NULL     NULL     NULL     NULL     NULL     NULL
1001     Test Jobplan     USA     NULL     NULL     1001     Sam     NULL     NULL     NULL     NULL
1001     Test Jobplan     USA     NULL     NULL     1001     Mike     NULL     NULL     NULL     NULL
1001     Test Jobplan     USA     NULL     NULL     NULL     NULL     1001     Hammer     NULL     NULL
1001     Test Jobplan     USA     NULL     NULL     NULL     NULL     NULL     NULL     1001     1
1001     Test Jobplan     USA     NULL     NULL     NULL     NULL     NULL     NULL     1001     2
1001     Test Jobplan     USA     NULL     NULL     NULL     NULL     NULL     NULL     1001     3
Please help me out with this issue.
Thanks,
Siva
Edited by: 931144 on Apr 30, 2012 11:35 AM

Hope below helps you
CREATE TABLE JOBPLAN
( JPNUM NUMBER,
DESCRIPTION VARCHAR2(100)
INSERT INTO JOBPLAN VALUES(1001,'Test Jobplan');
CREATE TABLE JOBTASK
( LOCATION VARCHAR2(10),
JT_JPNUM NUMBER,
JT_TASK NUMBER
INSERT INTO JOBTASK VALUES('USA',1001,10);
INSERT INTO JOBTASK VALUES('USA',1001,20);
INSERT INTO JOBTASK VALUES('USA',1001,30);
INSERT INTO JOBTASK VALUES('USA',1001,40);
INSERT INTO JOBTASK VALUES('USA',1001,50);
CREATE TABLE JOBLABOR
( JL_JPNUM NUMBER,
JL_LABOR VARCHAR2(10)
INSERT INTO JOBLABOR VALUES(1001,'Sam');
INSERT INTO JOBLABOR VALUES(1001,'Mike');
CREATE TABLE JOBMATERIAL
( JM_JPNUM    NUMBER,
JM_MATERIAL VARCHAR2(10)
INSERT INTO JOBMATERIAL VALUES(1001,'Hammer');
CREATE TABLE JOBSEQUENCE
( JS_JPNUM    NUMBER,
JS_SEQUENCE NUMBER
INSERT INTO JOBSEQUENCE VALUES(1001,1);
INSERT INTO JOBSEQUENCE VALUES(1001,2);
INSERT INTO JOBSEQUENCE VALUES(1001,3);
SELECT   JP.JPNUM        AS JPNUM       ,
         JP.DESCRIPTION AS DESCRIPTION ,
         NULL            AS LOCATION    ,
         NULL            AS JT_JPNUM    ,
         NULL            AS JT_TASK     ,
         NULL            AS JL_JPNUM    ,
         NULL            AS JL_labor    ,
         NULL            AS JM_JPNUM    ,
         NULL            AS JM_MATERIAL ,
         NULL            AS JS_JPNUM    ,
         NULL            AS JS_SEQUENCE
FROM JOBPLAN JP
UNION ALL
SELECT   JP.JPNUM        AS JPNUM       ,
         JP.DESCRIPTION AS DESCRIPTION ,
         JT.LOCATION     AS LOCATION    ,
         JT.JT_JPNUM     AS JT_JPNUM    ,
         JT.JT_TASK      AS JT_TASK     ,
         NULL            AS JL_JPNUM    ,
         NULL            AS JL_labor    ,
         NULL            AS JM_JPNUM    ,
         NULL            AS JM_MATERIAL ,
         NULL            AS JS_JPNUM    ,
         NULL            AS JS_SEQUENCE
FROM JOBPLAN JP, JOBTASK JT
UNION ALL
SELECT   JP.JPNUM        AS JPNUM       ,
         JP.DESCRIPTION AS DESCRIPTION ,
         NULL            AS LOCATION    ,
         NULL            AS JT_JPNUM    ,
         NULL            AS JT_TASK     ,
         JL.JL_JPNUM     AS JL_JPNUM    ,
         JL.JL_labor     AS JL_labor    ,
         NULL            AS JM_JPNUM    ,
         NULL            AS JM_MATERIAL ,
         NULL            AS JS_JPNUM    ,
         NULL            AS JS_SEQUENCE
FROM JOBPLAN JP, JOBLABOR JL
UNION ALL
SELECT   JP.JPNUM        AS JPNUM       ,
         JP.DESCRIPTION AS DESCRIPTION ,
         NULL            AS LOCATION    ,
         NULL            AS JT_JPNUM    ,
         NULL            AS JT_TASK     ,
         NULL            AS JL_JPNUM    ,
         NULL            AS JL_labor    ,
         JM.JM_JPNUM     AS JM_JPNUM    ,
         JM.JM_MATERIAL AS JM_MATERIAL ,
         NULL            AS JS_JPNUM    ,
         NULL            AS JS_SEQUENCE
FROM JOBPLAN JP, JOBMATERIAL JM
UNION ALL
SELECT   JP.JPNUM        AS JPNUM       ,
         JP.DESCRIPTION AS DESCRIPTION ,
         NULL            AS LOCATION    ,
         NULL            AS JT_JPNUM    ,
         NULL            AS JT_TASK     ,
         NULL            AS JL_JPNUM    ,
         NULL            AS JL_labor    ,
         NULL            AS JM_JPNUM    ,
         NULL            AS JM_MATERIAL ,
         JS.JS_JPNUM     AS JS_JPNUM    ,
         JS.JS_SEQUENCE AS JS_SEQUENCE
FROM JOBPLAN JP, JOBSEQUENCE JS;
     JPNUM DESCRIPTION     LOCATION      JT_JPNUM    JT_TASK   JL_JPNUM JL_LABOR     JM_JPNUM JM_MATERIA   JS_JPNUM JS_SEQUENCE
      1001 Test Jobplan    NULL       NULL        NULL       NULL       NULL       NULL       NULL    NULL          NULL
      1001 Test Jobplan    USA        1001        10         NULL       NULL       NULL       NULL    NULL          NULL
      1001 Test Jobplan    USA        1001        20         NULL       NULL       NULL       NULL    NULL          NULL
      1001 Test Jobplan    USA        1001        30         NULL       NULL       NULL       NULL    NULL          NULL
      1001 Test Jobplan    USA        1001        40         NULL       NULL       NULL       NULL    NULL          NULL
      1001 Test Jobplan    USA        1001        50         NULL       NULL       NULL       NULL    NULL          NULL
      1001 Test Jobplan    NULL       NULL        NULL       1001       Sam        NULL       NULL    NULL          NULL
      1001 Test Jobplan    NULL       NULL        NULL       1001       Mike       NULL       NULL    NULL          NULL
      1001 Test Jobplan    NULL       NULL        NULL       NULL       NULL       1001       Hammer NULL          NULL
      1001 Test Jobplan    NULL       NULL        NULL       NULL       NULL       NULL       NULL    1001          1
      1001 Test Jobplan    NULL       NULL        NULL       NULL       NULL       NULL       NULL    1001          2
      1001 Test Jobplan    NULL       NULL        NULL       NULL       NULL       NULL       NULL    1001          3
{code}

How can I modify data from a Transparent Table without ABAP code.

Hi,All
How can I modify data from a Transparent Table (like TCURR), and important thing is I want do all that with no ABAP code here. It is like that we always do that in a Oracle database use TOAD or PLSQL third party tools, with no script code here.
I had fond that there is a way can do that:
1, type 'se11',and Display Database table 'TCURR', click Contents, then click Execute to display all data
2, type '/h' and let debugging on
3, select one of this data then click 'Display',enter in debugging system.
4, then make a breakpoint in the code. But... display a dialog let I type a 'ABAP Cmnds', I want to know what can be type in for that?
and, My system is ECC6.
thank you all
Edited by: xuehui li on Aug 20, 2008 6:30 PM

Hello,
Your approach (with Vijay's suggestion) MAY work. However, depending on how tight security is at the company that you are working at you may or may not be able to acutaly change the value of the SHOW field to EDIT. This will be especially true if you are working in a Production environment. Vijay's other comment is true as well. This is not a recommended approach to change data (especially data with a financial impact like TCURR) in a production environment. The auditors will not be impressed.
Explore the option of a maintenace view or look at tcode TBDM to upload a file which includes daily rates from providers like Reuters or try tcode s_bce_68000174 which is a maintenance view on TCURR.
Regards
Greg Kern

SQ01 - Join of different tables or ABAP Code in SAP Query

Similar Messages

Maybe you are looking for