Sql connecting problem form ip of local server

hello sir 
i have counfigured sql server 2008 r2
when iconnect sql database engine using  ip\"instance name" it show me error  (ip address of local server)
i got same error when i am connecting only ip without insatbce name "cannot connect to (ip)"
but i can connect with .\"incatance name"  and  
"pc name"\"instance name"
i need to access from ip\"inctance name"
any one have this type of solutions ?
then plz help me
i have also check this options
http://blogs.msdn.com/b/walzenbach/archive/2010/04/14/how-to-enable-remote-connections-in-sql-server-2008.aspx

Hi,
Try below links:
http://blogs.msdn.com/b/sql_protocols/archive/2007/05/13/sql-network-interfaces-error-26-error-locating-server-instance-specified.aspx
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/ed7b78c0-7dcb-4be7-96fa-f85b74f0e413/sql-network-interfaces-error-26-error-locating-serverinstance-specified
http://stackoverflow.com/questions/13754563/sql-network-interfaces-error-26-error-locating-server-instance-specified
sathya - www.allaboutmssql.com ** Mark as answered if my post solved your problem and Vote as helpful if my post was useful **.

Similar Messages

  • Not Converted : Free-hand SQL connection problem

    While converting a Free Hand SQL report from Desktop Intelligence to Web Intelligence report in BI XI 3.1, I am faced with the problem
    Not Converted : <REPNAME> - Free-hand SQL connection problem
    It is be noted that there are some other Free Hand SQL Reports, that go converted and published without any error. The subject report has two Data Providers; one referring to the Universe and other from the Free Hand SQL tagged to a DB Connection

    Ajay,
    Some more points that can be of consideration to you to help understand my problems.
    The conversion from DeskI to WebI is in the same version BI XI 3.1 and not to BI 4.0 in which Free Hand SQLs is not supported.
    I have converted one other Free Hand SQL Report with an error "Partially Converted : <REPNAME2> - Conditional or permanent Hide Header not available in Web Intelligence", for which I had to edit the report in InfoView and un-tick the "Show When Empty" property of the table ( http://www.forumtopics.com/busobj/viewtopic.php?t=197157&view=next&sid=e6840aafa2d1267c66dae164d1dbf9db ). I think the solution mentioned in this link does not meet the purpose as the table is not displayed in the design time after the above untick.
    Coming back to our issue, further probing into this aspect I stumbled upon this link meant for RCT for BI 4.0 version
    https://csdwportal.dhhs.state.nc.us/downloads/Business%20Objects%20XI%20R4.0%20Docs/SAP%20BusinessObjects%20Report%20Con…
    where in Section 3.4.9, there is a mention of the limitation in conversion as under
    "Conversion of reports with free-hand SQL or stored procedures is only possible in Connected mode, since the Report Conversion Tool needs to use the secured connection to the database that is saved in the CMS."
    I want to how the secured connection to the database in REPNAME2 is different from the subject report REPNAME1 as REPNAME2 got partially converted. The error reported for Subject report is "Free Hand SQL Connection Problem" and not conversion problem which can occur after the connection is established.
    I did check the security properties of various FHSQL connections in the CMC and all of them are identical in nature.
    Please advise

  • SQL Connect problem - migration from Oracle 7.3.4 to Oracle 8.0.6

    Our development environment has just been upgraded from HP10.20
    to HP11 and the database from Oracle 7.3.4.0 to Oracle 8.0.6.0.
    I am now having problems with one of the PRO*C programs. The old
    executable( compiled in the old enviroment HP10/Oracle734) is
    working fine in the new environment. But after I successfully re-
    compiled this program in the new environment, the new executable
    is not working and stops at the statement: 'EXEC SQL CONNECT:
    userid'. I have checked the userid and Oracle settings, they are
    correct. Right after the EXEC SQL, I've tried checking the
    status of connection, but it never gets there. The
    only change to the make file is using
    $(ORACLE8_HOME)/precomp/lib/env_precomp.mk instead of using
    $(ORACLE7_HOME)/precomp/env_precomp.mk
    Other PRO*C programs which are using exactly the same connecting
    statemment are working fine.
    Anyone have any ideas, I would appreciate them?
    Thanks,

    I am upgrading with precisely the same varaibles that you encountered
    and am receiving the same inability to do a simple CONNECT with
    Pro*C. Were you able to resolve this problem? If so, please reply
    with some guidance.
    Thank you.
    - Tad Franson
    [email protected]

  • Storing data in SQL-connection problem

    hello,
    I'm a new user with pdf and not much of a programmer. I've built a fillable form and added some buttons to email/print. I've set up a data connection with sql. The connection works, I can bind the fields.
    Now what i'm looking to do is when the form is opened, it's blank. After the form is completed by the user, they can hit a button to store the data into sql. I'm not interested in pulling data up from sql in the form, I strictly want to store the data once they hit a button.
    From reviewing these forums, I believe I need to open the connection, then store the data. I probably want to keep the connection open to allow the user to make edits prior to closing the file, then close the connection before closing the file.
    I've added the following code on the click of a button:
    connect = ADBC.newConnection("Intranet");
    statement = connect.newStatement();
    var query = 'INSERT INTO HR_DisciplinaryWarning ( employeename, warningtype, suspensiondays, EmployeePosition) values ("employeename", "warningtype", "suspensiondays", "EmployeePosition")';
    statement.execute(query);
    When I try this I get an error...ADBC is not defined.
    Any help is greatly appreciated!

    James,
    It sounds like an interesting project.
    I would suggest starting with creating the form as the user would use it to enter the initial data.
    Second, define a data connection to insert data into a particular database and add a button to the form which, when clicked, will execute the data connection and insert a new record into the database using the data supplied by the user. To make this even better, I would make the button initially invisible and would use a hidden text field to trigger its appearance: In the text field's "Form:Ready" event, if its value is not empty, set the button's presence to be visible. This way, when the user fills-in the form and submits it, they don't see the button but once the data is imported into the form by the Corp Rep, the button appears so that they can save the data to the database. To create the button's script, you'll need to read the article I just posted to my blog which demonstrates
    how to insert, update and delete records in a database. You'll also need to generate the "INSERT" SQL statement pulling-in the necessary values from the correct fields on the form.
    Third, to ensure that the hidden text field's value is set prior to the user submitting the form's data in the first step, you should use what I call the
    two button submit technique. When the user clicks the visible (regular) button, the Click event sets the value of the hidden text field to some value of your choice and then executes the invisible submit button's Click event, causing the form's data to be submitted with the user's supplied values and a value specified for the hidden text field.
    Fourth, when the Corp Rep receives the form's data in XML format via email, they would open the form and import the data into it. Since the hidden text field's "Form:Ready" event will be fired after data is imported, the "insert into database" button will appear (since the text field's value will be set to something other than empty from the imported data).
    Finally, the Corp Rep can make any necessary adjustments when then click the "insert" or "save to database" button to create the new record in the database.
    Stefan
    Adobe Systems
    More answers on
    FormBuilder.

  • Sql connection problem

    Hai All
    I am connecting via sqlplus in my database server. I already give the 'admin' password for 'sys' user at installation time. I connect in sql plus in different types.
    SQL> conn / as sysdba
    Connected.
    I think this connection succeed because of operating system auhentication
    SQL> conn sys/asdas as sysdba
    Connected.
    I give the wrong password here but it connected
    I think this connection succeed because of operating system auhentication
    SQL> conn sys/admin@db as sysdba
    Connected.
    This connection is ok
    SQL> conn sys/asdas@db as sysdba
    ERROR:
    ORA-01017: invalid username/password; logon denied
    Warning: You are no longer connected to ORACLE.
    I give the wrong password and exact connection string(db) here but it not connected
    why it not connected?
    Please clarify...

    As mentioned earlier as well
    SQL> conn / as sysdba
    Connected.
    I think this connection succeed because of operating system auhenticationYES this is OS authentication.
    SQL> conn sys/asdas as sysdba
    Connected.
    I give the wrong password here but it connected
    I think this connection succeed because of operating system auhenticationYES this is OS authentication.
    SQL> conn sys/admin@db as sysdba
    Connected.
    This connection is okThis is the remote connection goes through the listener and you got connected bec's you have given a corect userid, password & conncection string.
    SQL> conn sys/asdas@db as sysdba
    ERROR:
    ORA-01017: invalid username/password; logon denied
    Warning: You are no longer connected to ORACLE.
    This is again a remote connection goes through the listener and you not getting connected bec's you have given a correct userid, WRONG password & correct conncection string.

  • Submit a PDF form to a local server

    I've created a simple PDF form using Acrobat 8 Pro on a Mac, and I'm not sure if what I want to do with it is possible. I want to have the PDF form sitting on our local file sharing server and have employees grab the PDF form and fill it out, and when they hit the SUBMIT button have an FDF file saved to a folder on the same server.
    When I choose "submit a form" while trying to format the SUBMIT button, it wants a URL to send it to. Is there a way to tell it to save to a certain location on a local server?
    I may be way out of my league here so I'd appreciate any help.
    Thank You

    Acrobat Pro allows users to export the form data a number of different ways. For example, in Acrobat 7, use the menu item "Advanced > Forms > Export Data from Form...". There are also various JavaScript methods that allow one to export a data file (e.g., exportAsFDF).
    George

  • Connection problems to Analysis Services (local)

    Hi everybody,
    I can not access to "Analysis Services" in local way with SQL Server Management Studio. I get the following error: 
    "Unable to establish a connection. Make sure the server is running. (Microsoft.AnalysisServices.AdomdClient)"
    "You can not establish a connection because the target machine expressly rejected that connection 127.0.0.1:2383 (System)"
    I have checked the related services and they are running: 
    SQL Analysis Services (InstanciaName) - En ejecución - LocalSystem
    SQL Server  (InstanciaName) - En ejecución - LocalSystem
    SQL Server Reporting Services  (InstanciaName) - En ejecución - LocalSystem
    SQL Server Agent  (InstanciaName) - En ejecución - LocalSystem
    SQL Server Browser   (InstanciaName) - En ejecución - LocalSystem
    I have checked that the only port whitch is listening is the 2382, and not the 2383:
    C:\Windows\system32>netstat /abo | findstr 238
      TCP    0.0.0.0:2382           ServerName:0             LISTENING       2016
      TCP    [::]:2382                 ServerName:0             LISTENING       2016
    Any idea about what is causing the problem?
    Thank you.
    Best regards, 

    Thanks for your reply,
    The list of services running is the following, before it was an example:
    SQL Analysis Services (ALTIRIS) - En ejecución - LocalSystem
    SQL Server  (ALTIRIS)
    - En ejecución - LocalSystem
    SQL Server Reporting Services  (ALTIRIS)
    - En ejecución - LocalSystem
    SQL Server Agent  (ALTIRIS)
    - En ejecución - LocalSystem
    SQL Server Browser   (ALTIRIS)
    - En ejecución - LocalSystem
    ALTIRIS is my instancename.
    When I try to connect, I put "(local)" in the SQL Server Management Studio, but I get the error.
    Best regards, 

  • SQL connectivity problem

    Hi to all,
    Can anybody resolve this eror i.e.
    Provider: named pipes Provider, error- 40 could not open the connection to the SQL Server.
    i have done a lot of search to resolve it but i could nt get a exact solution of this problem.Please it s humbly requested to you people please give me the solution of as soon as possible. Actually  i m doing my final project  in C#>NET with using SQL SERVER 2005 and have a very hsort time to complete the project but due to this problem i cannot go forward.Please reply me as soon as possible.
    I m waiting for your response
    Thanks in advance
    meerab

     System.Data.SqlClient.SqlEwception:An error has occurred while establishing
    a connection to the server.when connecting to SQL Server 2005,this failure
    may be causeed by the fact that under the default setting SQL serves dose not
    allow remote connection.(provider:Named Pipes Provider,40-could not open a
    connection SQL Server)
     at System.Data.SqlClient.SqlInternal Connection. OnError(SqlException exception, boolean breakConnection)
     at System.Data.sqlclient.TdsParser.TrowExceptionAndWarning(TdsstatObject stateObj)
     at System.Data.sqlclient.TdsParser.Connect(boolean& useFailoverPartner,boolean&failureDemandDone,String host,String
    failoverPartner,String protocol,SqlinternalConnectionTds connHandler,lnt64 timerExpire,boolean encrypt,boolean trustSearvCert,boolean
    integtedSecurity.SqlConnction owingObject,boolean aliasLookup)
     at System.Data.Sqlclient .SqlInternalConnectionTdat.openLogineEnlist(SqlConnection owingObject,SqlCooectionString connectionOption
    string newPassword,boolean redirectUserInstance)
     at System.Data.Sqlclient .SqlInternalConnectionTd.ctor(DbConnectionPoolIdentity identity,SqlConnectionString coonectionOption,object
    proviedInfo,StringnemPassword,Sqlconnection owingObject,boolean redirctedUserIntance)
     at System.Data.SqlconnectionFactory.creatConnectio(DbConnectionOption option ,ObjectpoolGroupProviedInfo,
    DPConnectionPool pool,Dbconnction owingConnection)
     at.System.Data.ProviderBase.DbConnectionFactory.CreatpooledConnecton(DbConnection owwingConnection,DBConnectionPool pool,
    DbConnectionOptions option
     at system.Data.ProviderBase.DbCnnectionPool.CreatObject(dpConnection owingObject)
     at system.Data.ProviderBase.DbCnnectionPool.UsercreatRequeest(DbConnection owingObject)
     at system.Data.ProviderBase.DbCnnectionPool.GetConnection(DbConnection owningobject)
    at system.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory 0
    at System.Data.SqlClient.SqlConnection.Open()
    at DAL.Class1.srh(string item_name)in C:\Documents and settings\star\Desktop\final_project\Solution\DAL\Class1.cs:line 80
    It s the complete error message. i Hope u ll understand it, now.
    I m waitng for ur response.............
    Thanks in advance.

  • Connect to Form 6i from local database 8i

    Hello,
    I installed Oracle 8.1.7 and Oracle Form Developer 6i on my PC locally, and I can't get the Form Builder or Procedure Builder connect to the Oracle database.
    I can connect to Oracle 8.1.7 using SQLPlus, but not through Form Builder or Procedure Builder.
    I did the followings:
    C> tnsping dbname
    -- this works fine. it pings the database.
    C> tnsping80 dbname
    --- this failed and it gives the error:
    TNS-12538: TNS:no such protocol adapter
    Please help. Thanks.
    Andrew.

    I did what you told me, but still got error:
    C:\>tnsping80 study.com
    TNS Ping Utility for 32-bit Windows: Version 8.0.6.0.0 - Production on 17-FEB-04 19:07:22
    (c) Copyright 1997 Oracle Corporation. All rights reserved.
    Attempting to contact (ADDRESS=(PROTOCOL=TCP)(HOST=atnguyen)(PORT=1521))
    TNS-12538: TNS:no such protocol adapter
    The TNSPING from Oracle8i is fine.
    I also saw error in the Ora6i\net80\admin\log\onrsd.log
    Oracle Names Client Cache for 32-bit Windows: Version 8.0.6.0.0 - Production on 17-FEB-04 18:57:11
    (c) Copyright 1995 Oracle Corporation. All rights reserved.
    System parameter file is E:\Oracle\ora6i\NET80\admin\sqlnet.ora
    Log messages written to E:\Oracle\ora6i\NET80\log\onrsd.log
    NNO-00601: warning: no forwarders, DEFAULT-FORWARDERS-ONLY mode ignored
    NNO-00300: no listen addresses specified, at least one is required
    NNC-00002: error listening on stream (ADDRESS=(PROTOCOL=IPC)(KEY=ONAMES))
    TNS-12538: TNS:no such protocol adapter
    TNS-12560: TNS:protocol adapter error
    TNS-00508: No such protocol adapter
    Is there error in the sqlnet.ora? or it need addional setting? Does this problem cause by loading different version of Oracle in the same PC? Do the Oracle 8i and Form6i need to be in one home? Please help to resolve this problem. many thanks....

  • Connecting Oracle9i Forms to my Local Database

    I downloaded the Oracle9i Forms successfully and installed it, but I cannot connect to my local database on the same machine. Please Help!

    Ah Ha,
    I figured it out.
    I checked the Apache error log and saw that it was looking
    for _mmServerScripts.
    The file for my site was to deep in the www directory (to
    many sub files). I moved it up so that apache could find the
    _mmServerScripts and bingo I am golden.
    I hope this helps anyone who runs into a similar problem.

  • Java.sql.connection problems

    Hi, I hav got this problem:
    PRB 1
    I have got the JDBC connection established with the OracleDataSource instance on my java application
    I wonder if there is a way to check the connection if it is still alive. any hint? i tried connection.isClosed() but that doesn't help.
    PRB 2
    I am in this scenario:
    The connection is established during application start and something goes wrong say like the DB server goes offline in the middle of no where and I do a commit / rollback. I will get a SQLExeption called. But right after the db comes back online.. i tried to do a commit / rollback, the SQLExeption is still persist.
    Q1. Does this mean that when the exception is caught, my connection would no longer be valid and I need to restart the application?
    Q2. could i reinitialize the connection after the exception to avoid the restart?
    Thank you.

    Hi, I hav got this problem:
    PRB 1
    I have got the JDBC connection established with the
    OracleDataSource instance on my java application
    I wonder if there is a way to check the connection if
    it is still alive. any hint? i tried
    connection.isClosed() but that doesn't help.From Java APIs reg. isClosed():This method is guaranteed to return true only when it is called after the method Connection.close has been called.
    This method generally cannot be called to determine whether a connection to a database is valid or invalid. A typical client can determine that a connection is invalid by catching any exceptions that might be thrown when an operation is attempted.
    PRB 2
    I am in this scenario:
    The connection is established during application start
    and something goes wrong say like the DB server goes
    offline in the middle of no where and I do a commit /
    rollback. I will get a SQLExeption called. But right
    after the db comes back online.. i tried to do a
    commit / rollback, the SQLExeption is still persist.
    Q1. Does this mean that when the exception is caught,
    my connection would no longer be valid and I need to
    restart the application?
    Q2. could i reinitialize the connection after the
    exception to avoid the restart?Once your DB goes down, your connection is broken. You cannot do anything with that connection...like Rollback, commit etc. You need to re-establish the connection. You don't need to restart the application, but you might want to check if the connection is null. If it is, you might have to try a new connection. Probably, your application can quit trying for a connection after 'x' number of attempts.
    Kumar

  • Coldfusion mx sql connection problem

    Hi guys,
    I just installed CF MX, but with Apache server, and it works
    fine. But, I can't get it to work with my MySQL databases. I have
    phpMyAdmin, and it works fine, but, I get the following error when
    I want to make a new Datasource using MySQL
    Connection verification failed for data source: testing
    []java.sql.SQLException: Communication failure during
    handshake. Is there a server running on localhost:3306?
    The root cause was that: java.sql.SQLException: Communication
    failure during handshake. Is there a server running on
    localhost:3306?
    SQL is running on 3306, so...what's wrong? I'm kinda stuck.
    Thanks in advance!

    http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=6ef0253
    HTH
    Tim Carley
    www.recfusion.com
    [email protected]

  • Connectivity Problems Forms 10g Builder with 11g Database Release 1

    Hello All,
    I am trying to connect 11g Database (Version 11.1.0.7.0 mounted on Linux) from my Oracle Forms 10g Builder 10.1.2.0.2 in my client PC Windodws XP. But its just hanging and doesnt connects at all.
    Strange is that from the same Oracle home i am able to connect to same 11g user through the reports builder 10g and
    , sqlplusw and sqlplus from 10g home.
    But i am not able to connect to 11g R1 database from my Forms Builder alone. Why is this? Can the PROs get me out of this problem please.
    Thanks in advance.

    Hi
    For your issue i suggest close your thread here as changing thread status to answered and move it to Forum Home » Development Tools which you can get more quick response
    Regard
    Helios

  • Submitting the Form to a local server

    Very new to Acrobat 8 Pro. I work at a public facility and we want to eliminate paper forms. I've created a form in LiveCycle and added a Submit button with HTTP. I've added the location of the server and folder on the server in the object palette where I want the form saved to, but nothing gets saved. Can someone please save the wary?
    Any help would be greatly appreciated.

    >Very new to Acrobat 8 Pro.
    So you aren't using the LiveCycle Form Manager product?
    >I've created a form in LiveCycle
    I'm guessing that's LiveCycle Designer. There is a different forum for
    that. This may seem picky, but each forum has its own specialists.
    > I've added the location of the server and folder on the server in the object palette where I want the form saved to, but nothing gets saved
    Be sure you aren't assuming that "submit" means "save to a folder". It
    is anything but.
    Aandi Inston

  • WLC 2504 Connectivity Problems

    This is a tricky one.
    I installed a 2504 WLC with three AP's. Two SSID’s were configured, one with WPA2/AES-TIKIP and the other with Web Auth.
    After installation, customers could connect to WLAN without problem and .
    The problem that is occurring is that since the beginning of week, customers PDA's, cell phones and iPad and cannot access Internet with any of the two WLAN but clients who used laptop have no connection problems. Also the DHCP Server is assigning IP's correctly.
    This problem also occurs with test SSID I created which is Open Auth. I see associated Cell phones and IPAD to the WLC but none of these answers ping from the WLC.
    This is a WLC 2504 with IOS 7.4.100.

    Hello everyone!
    Today I did a test with my Cell phone Samsung Note 2 and I have the same conectivity problem.
    I have installed the APK ipconfig from the Play Store for Android in my cell phone and y see that I getting IP Address, Mask and Gateway.
    This is what I´ve got from the APK:
    IP ADDRESS 192.168.8.181
    MASK: 255.255.255.0
    GATEWAY: 192.168.8.2
    DHCP SERVER: 192.168.8.16
    DNS1: 192.168.6.16
    DNS2: 192.168.2.16
    I have connected my laptop to the WLAN with no issue and I´m getting this:
    The IP address of the DHCP Server is 192.168.8.16 and 192.168.6.16 and is a Microsoft Server.
    I´ve created a test WLAN with OPEN AUTH but the problem remains.
    Here is the OUTPUT you requested:
    show wlan 1
    WLAN Identifier.................................. 1
    Profile Name..................................... APS-PT-01
    Network Name (SSID).............................. APS-PT-01
    Status........................................... Enabled
    MAC Filtering.................................... Disabled
    Broadcast SSID................................... Enabled
    AAA Policy Override.............................. Disabled
    Network Admission Control
      Client Profiling Status ....................... Disabled
       DHCP ......................................... Disabled
       HTTP ......................................... Disabled
      Radius-NAC State............................... Disabled
      SNMP-NAC State................................. Disabled
      Quarantine VLAN................................ 0
    Maximum number of Associated Clients............. 0
    Maximum number of Clients per AP Radio........... 200
    Number of Active Clients......................... 16
    Exclusionlist Timeout............................ 60 seconds
    Session Timeout.................................. 1800 seconds
    User Idle Timeout................................ 300 seconds
    User Idle Threshold.............................. 0 Bytes
    NAS-identifier................................... APS-Admin-WLC-01
    CHD per WLAN..................................... Enabled
    Webauth DHCP exclusion........................... Disabled
    Interface........................................ management
    Multicast Interface.............................. Not Configured
    WLAN IPv4 ACL.................................... unconfigured
    WLAN IPv6 ACL.................................... unconfigured
    mDNS Status...................................... Enabled
    mDNS Profile Name................................ default-mdns-profile
    DHCP Server...................................... Default
    DHCP Address Assignment Required................. Disabled
    Static IP client tunneling....................... Disabled
    Quality of Service............................... Silver
    Per-SSID Rate Limits............................. Upstream          Downstream
    Average Data Rate................................   0                      0
    Average Realtime Data Rate.......................   0                      0
    Burst Data Rate..................................   0                      0
    Burst Realtime Data Rate.........................   0                      0
    Per-Client Rate Limits........................... Upstream          Downstream
    Average Data Rate................................   0                      0
    Average Realtime Data Rate.......................   0                      0
    Burst Data Rate..................................   0                      0
    Burst Realtime Data Rate.........................   0                      0
    Scan Defer Priority.............................. 4,5,6
    Scan Defer Time.................................. 100 milliseconds
    WMM.............................................. Allowed
    WMM UAPSD Compliant Client Support............... Disabled
    Media Stream Multicast-direct.................... Disabled
    CCX - AironetIe Support.......................... Enabled
    CCX - Gratuitous ProbeResponse (GPR)............. Disabled
    CCX - Diagnostics Channel Capability............. Disabled
    Dot11-Phone Mode (7920).......................... Disabled
    Wired Protocol................................... None
    Passive Client Feature........................... Disabled
    Peer-to-Peer Blocking Action..................... Disabled
    Radio Policy..................................... All
    DTIM period for 802.11a radio.................... 1
    DTIM period for 802.11b radio.................... 1
    Radius Servers
       Authentication................................ Global Servers
       Accounting.................................... Global Servers
          Interim Update............................. Disabled
       Dynamic Interface............................. Disabled
       Dynamic Interface Priority.................... wlan
    Local EAP Authentication......................... Disabled
    Security
       802.11 Authentication:........................ Open System
       FT Support.................................... Disabled
       Static WEP Keys............................... Disabled
       802.1X........................................ Disabled
       Wi-Fi Protected Access (WPA/WPA2)............. Enabled
          WPA (SSN IE)............................... Enabled
             TKIP Cipher............................. Enabled
             AES Cipher.............................. Enabled
          WPA2 (RSN IE).............................. Enabled
             TKIP Cipher............................. Enabled
             AES Cipher.............................. Enabled
          Auth Key Management
             802.1x.................................. Disabled
             PSK..................................... Enabled
             CCKM.................................... Disabled
             FT-1X(802.11r).......................... Disabled
             FT-PSK(802.11r)......................... Disabled
             PMF-1X(802.11w)......................... Disabled
             PMF-PSK(802.11w)........................ Disabled
          FT Reassociation Timeout................... 20
          FT Over-The-DS mode........................ Enabled
          GTK Randomization.......................... Disabled
          SKC Cache Support.......................... Disabled
          CCKM TSF Tolerance......................... 1000
       WAPI.......................................... Disabled
       Wi-Fi Direct policy configured................ Disabled
       EAP-Passthrough............................... Disabled
       CKIP ......................................... Disabled
       Web Based Authentication...................... Disabled
       Web-Passthrough............................... Disabled
       Conditional Web Redirect...................... Disabled
       Splash-Page Web Redirect...................... Disabled
       Auto Anchor................................... Disabled
       FlexConnect Local Switching................... Disabled
       flexconnect Central Dhcp Flag................. Disabled
       flexconnect nat-pat Flag...................... Disabled
       flexconnect Dns Override Flag................. Disabled
       FlexConnect Vlan based Central Switching ..... Disabled
       FlexConnect Local Authentication.............. Disabled
       FlexConnect Learn IP Address.................. Enabled
       Client MFP.................................... Optional
       PMF........................................... Disabled
       PMF Association Comeback Time................. 1
       PMF SA Query RetryTimeout..................... 200
       Tkip MIC Countermeasure Hold-down Timer....... 60
    AVC Visibilty.................................... Disabled
    AVC Profile Name................................. None
    Flow Monitor Name................................ None
    Call Snooping.................................... Disabled
    Roamed Call Re-Anchor Policy..................... Disabled
    SIP CAC Fail Send-486-Busy Policy................ Enabled
    SIP CAC Fail Send Dis-Association Policy......... Disabled
    KTS based CAC Policy............................. Disabled
    Assisted Roaming Prediction Optimization......... Disabled
    802.11k Neighbor List............................ Disabled
    802.11k Neighbor List Dual Band.................. Disabled
    Band Select...................................... Disabled
    Load Balancing................................... Disabled
    Multicast Buffer................................. Disabled
    Mobility Anchor List
    WLAN ID     IP Address            Status
    802.11u........................................ Disabled
    MSAP Services.................................. Disabled
    (Cisco Controller) >
    (Cisco Controller) >
    (Cisco Controller) >show w?
    wgb            wlan           wps           
    (Cisco Controller) >show wlan 2
    WLAN Identifier.................................. 2
    Profile Name..................................... APS-Visitas-PT
    Network Name (SSID).............................. APS-Visitas-PT
    Status........................................... Enabled
    MAC Filtering.................................... Disabled
    Broadcast SSID................................... Enabled
    AAA Policy Override.............................. Disabled
    Network Admission Control
      Client Profiling Status ....................... Disabled
       DHCP ......................................... Disabled
       HTTP ......................................... Disabled
      Radius-NAC State............................... Disabled
      SNMP-NAC State................................. Disabled
      Quarantine VLAN................................ 0
    Maximum number of Associated Clients............. 0
    Maximum number of Clients per AP Radio........... 200
    Number of Active Clients......................... 1
    Exclusionlist Timeout............................ 60 seconds
    Session Timeout.................................. 1800 seconds
    User Idle Timeout................................ 300 seconds
    User Idle Threshold.............................. 0 Bytes
    NAS-identifier................................... APS-Admin-WLC-01
    CHD per WLAN..................................... Enabled
    Webauth DHCP exclusion........................... Disabled
    Interface........................................ management
    Multicast Interface.............................. Not Configured
    WLAN IPv4 ACL.................................... unconfigured
    WLAN IPv6 ACL.................................... unconfigured
    mDNS Status...................................... Enabled
    mDNS Profile Name................................ default-mdns-profile
    DHCP Server...................................... Default
    DHCP Address Assignment Required................. Disabled
    Static IP client tunneling....................... Disabled
    Quality of Service............................... Silver
    Per-SSID Rate Limits............................. Upstream          Downstream
    Average Data Rate................................   0                      0
    Average Realtime Data Rate.......................   0                      0
    Burst Data Rate..................................   0                      0
    Burst Realtime Data Rate.........................   0                      0
    Per-Client Rate Limits........................... Upstream          Downstream
    Average Data Rate................................   0                      0
    Average Realtime Data Rate.......................   0                      0
    Burst Data Rate..................................   0                      0
    Burst Realtime Data Rate.........................   0                      0
    Scan Defer Priority.............................. 4,5,6
    Scan Defer Time.................................. 100 milliseconds
    WMM.............................................. Allowed
    WMM UAPSD Compliant Client Support............... Disabled
    Media Stream Multicast-direct.................... Disabled
    CCX - AironetIe Support.......................... Enabled
    CCX - Gratuitous ProbeResponse (GPR)............. Disabled
    CCX - Diagnostics Channel Capability............. Disabled
    Dot11-Phone Mode (7920).......................... Disabled
    Wired Protocol................................... None
    Passive Client Feature........................... Disabled
    Peer-to-Peer Blocking Action..................... Disabled
    Radio Policy..................................... All
    DTIM period for 802.11a radio.................... 1
    DTIM period for 802.11b radio.................... 1
    Radius Servers
       Authentication................................ Global Servers
       Accounting.................................... Global Servers
          Interim Update............................. Disabled
       Dynamic Interface............................. Disabled
       Dynamic Interface Priority.................... wlan
    Local EAP Authentication......................... Disabled
    Security
       802.11 Authentication:........................ Open System
       FT Support.................................... Disabled
       Static WEP Keys............................... Disabled
       802.1X........................................ Disabled
       Wi-Fi Protected Access (WPA/WPA2)............. Disabled
       WAPI.......................................... Disabled
       Wi-Fi Direct policy configured................ Disabled
       EAP-Passthrough............................... Disabled
       CKIP ......................................... Disabled
       Web Based Authentication...................... Enabled
    IPv4 ACL........................................ Unconfigured
    IPv6 ACL........................................ Unconfigured
    Web-Auth Flex ACL............................... Unconfigured
    Web Authentication server precedence:
    1............................................... local
    2............................................... radius
    3............................................... ldap
       Web-Passthrough............................... Disabled
       Conditional Web Redirect...................... Disabled
       Splash-Page Web Redirect...................... Disabled
       Auto Anchor................................... Disabled
       FlexConnect Local Switching................... Disabled
       flexconnect Central Dhcp Flag................. Disabled
       flexconnect nat-pat Flag...................... Disabled
       flexconnect Dns Override Flag................. Disabled
       FlexConnect Vlan based Central Switching ..... Disabled
       FlexConnect Local Authentication.............. Disabled
       FlexConnect Learn IP Address.................. Enabled
       Client MFP.................................... Optional but inactive (WPA2 not configured)
       PMF........................................... Disabled
       PMF Association Comeback Time................. 1
       PMF SA Query RetryTimeout..................... 200
       Tkip MIC Countermeasure Hold-down Timer....... 60
    AVC Visibilty.................................... Disabled
    AVC Profile Name................................. None
    Flow Monitor Name................................ None
    Call Snooping.................................... Disabled
    Roamed Call Re-Anchor Policy..................... Disabled
    SIP CAC Fail Send-486-Busy Policy................ Disabled
    SIP CAC Fail Send Dis-Association Policy......... Disabled
    KTS based CAC Policy............................. Disabled
    Assisted Roaming Prediction Optimization......... Disabled
    802.11k Neighbor List............................ Disabled
    802.11k Neighbor List Dual Band.................. Disabled
    Band Select...................................... Disabled
    Load Balancing................................... Disabled
    Multicast Buffer................................. Disabled
    Mobility Anchor List
    WLAN ID     IP Address            Status
    802.11u........................................ Disabled
    MSAP Services.................................. Disabled
    (Cisco Controller) >
    (Cisco Controller) >show wlan 3
    WLAN Identifier.................................. 3
    Profile Name..................................... Prueba
    Network Name (SSID).............................. Prueba
    Status........................................... Enabled
    MAC Filtering.................................... Disabled
    Broadcast SSID................................... Enabled
    AAA Policy Override.............................. Disabled
    Network Admission Control
      Client Profiling Status ....................... Disabled
       DHCP ......................................... Disabled
       HTTP ......................................... Disabled
      Radius-NAC State............................... Disabled
      SNMP-NAC State................................. Disabled
      Quarantine VLAN................................ 0
    Maximum number of Associated Clients............. 0
    Maximum number of Clients per AP Radio........... 200
    Number of Active Clients......................... 0
    Exclusionlist Timeout............................ 60 seconds
    Session Timeout.................................. 1800 seconds
    User Idle Timeout................................ 300 seconds
    User Idle Threshold.............................. 0 Bytes
    NAS-identifier................................... APS-Admin-WLC-01
    CHD per WLAN..................................... Enabled
    Webauth DHCP exclusion........................... Disabled
    Interface........................................ management
    Multicast Interface.............................. Not Configured
    WLAN IPv4 ACL.................................... unconfigured
    WLAN IPv6 ACL.................................... unconfigured
    mDNS Status...................................... Enabled
    mDNS Profile Name................................ default-mdns-profile
    DHCP Server...................................... Default
    DHCP Address Assignment Required................. Disabled
    Static IP client tunneling....................... Disabled
    Quality of Service............................... Silver
    Per-SSID Rate Limits............................. Upstream          Downstream
    Average Data Rate................................   0                      0
    Average Realtime Data Rate.......................   0                      0
    Burst Data Rate..................................   0                      0
    Burst Realtime Data Rate.........................   0                      0
    Per-Client Rate Limits........................... Upstream          Downstream
    Average Data Rate................................   0                      0
    Average Realtime Data Rate.......................   0                      0
    Burst Data Rate..................................   0                      0
    Burst Realtime Data Rate.........................   0                      0
    Scan Defer Priority.............................. 4,5,6
    Scan Defer Time.................................. 100 milliseconds
    WMM.............................................. Allowed
    WMM UAPSD Compliant Client Support............... Enabled
    Media Stream Multicast-direct.................... Disabled
    CCX - AironetIe Support.......................... Disabled
    CCX - Gratuitous ProbeResponse (GPR)............. Disabled
    CCX - Diagnostics Channel Capability............. Disabled
    Dot11-Phone Mode (7920).......................... Disabled
    Wired Protocol................................... None
    Passive Client Feature........................... Disabled
    Peer-to-Peer Blocking Action..................... Disabled
    Radio Policy..................................... All
    DTIM period for 802.11a radio.................... 1
    DTIM period for 802.11b radio.................... 1
    Radius Servers
       Authentication................................ Global Servers
       Accounting.................................... Global Servers
          Interim Update............................. Disabled
       Dynamic Interface............................. Disabled
       Dynamic Interface Priority.................... wlan
    Local EAP Authentication......................... Disabled
    Security
       802.11 Authentication:........................ Open System
       FT Support.................................... Enabled
       Static WEP Keys............................... Disabled
       802.1X........................................ Disabled
       Wi-Fi Protected Access (WPA/WPA2)............. Disabled
       WAPI.......................................... Disabled
       Wi-Fi Direct policy configured................ Disabled
       EAP-Passthrough............................... Disabled
       CKIP ......................................... Disabled
       Web Based Authentication...................... Disabled
       Web-Passthrough............................... Disabled
       Conditional Web Redirect...................... Disabled
       Splash-Page Web Redirect...................... Disabled
       Auto Anchor................................... Disabled
       FlexConnect Local Switching................... Disabled
       flexconnect Central Dhcp Flag................. Disabled
       flexconnect nat-pat Flag...................... Disabled
       flexconnect Dns Override Flag................. Disabled
       FlexConnect Vlan based Central Switching ..... Disabled
       FlexConnect Local Authentication.............. Disabled
       FlexConnect Learn IP Address.................. Enabled
       Client MFP.................................... Disabled
       PMF........................................... Disabled
       PMF Association Comeback Time................. 1
       PMF SA Query RetryTimeout..................... 200
       Tkip MIC Countermeasure Hold-down Timer....... 60
    AVC Visibilty.................................... Disabled
    AVC Profile Name................................. None
    Flow Monitor Name................................ None
    Call Snooping.................................... Disabled
    Roamed Call Re-Anchor Policy..................... Disabled
    SIP CAC Fail Send-486-Busy Policy................ Disabled
    SIP CAC Fail Send Dis-Association Policy......... Disabled
    KTS based CAC Policy............................. Disabled
    Assisted Roaming Prediction Optimization......... Disabled
    802.11k Neighbor List............................ Disabled
    802.11k Neighbor List Dual Band.................. Disabled
    Band Select...................................... Disabled
    Load Balancing................................... Disabled
    Multicast Buffer................................. Disabled
    Mobility Anchor List
    WLAN ID     IP Address            Status
    802.11u........................................ Disabled
    MSAP Services.................................. Disabled

Maybe you are looking for

  • Password for RSS iPhoto feed

    I created a photocast album then set the Name and Password to the photocast album. It uploaded and I was off to my mom's to set it up on her computer (mac mini). Got all the updates, install iLife 06, but would not recognize the password. errrrrrrrrr

  • Spry Tabbed Panels - Contribute Error Message

    I created a Web site using  Dreamweaver CS4 that uses a Spry Tabbed Panels.  It works fine, but so  far it fails when it is pulled into Contribute CS5.  I've read the posts  about allowing Spry Widget editing in Contribute, so I've turned on  that ca

  • Is it possible to pass blob from java to PL/SQL ?

    Hi, I try to bind a PL/SQL function who return a blob to a java class : Signature of java method :     public static Blob getBLOB(int aId, String aJDBC) {Create PL/SQL function : create or replace function aa_java(myPiId in number,myPiJDBC in varchar

  • Drop zones

    I using DVDSP 4.1.2, Mac OS 10.5.4, on a MacBook Pro 2.4 Intel Core Duo, 4 gigs RAM........ Is there no way in DVDSP 4.1.2 that I can rotate a drop zone? I can only resize it right? I am looking to rotate it about 15 degrees it possible. Thanks.

  • Moving CC from one computer to another

    I originally installed CC onto my two computers. One of those computers died. I was able to uninstall CC from that computer, but now it isn't letting me download CC onto my new computer. How do I do that? Thanks, Rich