SQL error: Internal database error * ERROR * Assertion failed: 201501 (10.0.1.3415)

A SQLA10 production database has been crashing at a customer site.
Here's the error which displayed when I tried to unload the database...
Unloading "DBA"."schedule_profile" into C:\resq\resqprod2\db\unload\719.dat (relative to server)
Unloading "DBA"."schedules" into C:\resq\resqprod2\db\unload\720.dat (relative to server)
***** SQL error: Internal database error *** ERROR *** Assertion failed: 201501 (10.0.1.3415)
Page for requested record not a table page or record not present on page -- transaction rolled back
The database 'C:\resq\resqprod2\db\resqprod2.db' could not be unloaded.
The database 'C:\resq\resqprod2\db\resqprod2.db' could not be unloaded.
I think that backups may also have this error.
Can the database be salvaged?
Thank you,
Doug

Hi Doug,
The error seems to be saying that a pointer is pointing to an invalid page.
Actually, the assertion message is suggesting that we were scanning for a row (record) on a particular page where we expected to find it, and didn't - the table page is likely corrupt.
Does a utility exist which would eliminate all pointers to invalid pages?
No. If the database is corrupted, it is best to move to your database recovery procedure from a valid backup. See KBA 1959391 - How can a SQL Anywhere (stand alone) database be restored from a full or incremental backup?
If you do not have a valid database backup but can still start and connect to the corrupted database (and it seems that you can), you can attempt to salvage the data out of the corrupted database tables manually to extract it to a new database (as Jinwoo suggested). See KBA 1959030 - How To Salvage Data When There are Corrupt Pages in the Database. Using -e to skip tables is appropriate and then trying to select the data that is not contained on invalid pages via the KBA instructions is your best option in this case.
Does sap/sybase offer a recovery service?
No, there is no such "recovery service" underneath SAP and any previous mentions of salvages were one-off contracts underneath Sybase Professional Services, and not a technical support service. These contracts are not available at SAP.
This topic was discussed thoroughly on the SQL Anywhere forum ( http://sqlanywhere-forum.sap.com/ ) previously here and here.
The prevention for this situation is to have properly validated backups, preferably in multiple backup generations to provide many opportunities for recovery. See: http://wiki.scn.sap.com/wiki/x/3QNcFg
Regards,
Jeff Albion
SAP Active Global Support

Similar Messages

Error #1015: Database Communication Error

Hi,
I am having a WebCTRL application on my infra which is connecting to SQL server 2008 R2.
On application side, we are frequently getting error messages saying that ,
Error #1015: Database Communication Error -- Critical problem occurred (With timings) Reestablished (DBname) database connection. details: Successfully reconnected to the database
i dont see any errors on SQL server logs as well as event logs on the server.
Is it happening because of SQL server ?
Is there anything i missed to check ?
Please help me to solve this issues.
Regards,
Vinodh Selvaraj

Can you check if your database properties set Auto Close to ON , it must be set to OFF
https://msdn.microsoft.com/en-us/library/bb402929.aspx
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Error: EncryptedLocalStore database access error in AIR 3.4

Hi,
A few of our users were prompted to update to Adobe AIR 3.4 today. After doing this they were no longer able to use our Adobe AIR "desktop" app. I've downloaded the 3.4 SDK and run our app via ADT and I get the following error in the Introspector:
Error: EncryptedLocalStore database access error
Our app stores configuration info in the EncryptedLocalStore.
This has never occurred before and if I uninstall 3.4 and go back to 3.3 the problem does not exist. We need an urgent solution to this because we have hundreds of users who use our AIR app every day. We've told them NOT to update to 3.4 until further notice.
Any assistance would be greatly appreciated.
Brad.

Hello AIR developers,
I want to thank you for your patience and again apologize to you for catching you off guard with this change. Our team met today and our immediate plan is to roll the ELS changes back to the AIR 3.3 level. We are working on a timeline for when this update will be occur. We are treating this with the highest priority and expect it will not take long.
For those interested, here’s how and why this change occurred. Over the past year or two we’ve heard complaints about the reliability of our ELS implementation, especially on the Mac platform. We’ve known all along that we wanted to refactor this feature and remove dependence on third party libraries. We undertook this restructuring during the 3.4 release schedule and finished without hearing any major complaints from our internal or prerelease users. One assumption we made was that ELS data was treated like a volatile cache. In the past we’ve given guidance on the usage of ELS in both blogs and our help documentation, suggesting that developers should not depend on ELS as permanent data storage because it “can be lost for a variety of reasons”. Our position on this hasn’t changed, but we acknowledge and understand that some applications have come to depend on this data and if at all possible, we should do our best to persist it.
Going forward, we will most likely reimplement our changes from 3.4, however when doing this we will also work to provide a way to automatically upgrade and persist your application's data. We will also give plenty of advanced notice and make releases available on our labs.adobe.com site. We want this change to improve your lives by adding improved stability and we look forward to working with you on this in the future.
Thanks,
Chris

Compiler error with forte 6.2 - assertion failed in sp_interface.cc

I have a compilation error when compiling on my Ultra 10
using Forte 6.2 C compiler (5.3). Here's the line:
teds@enigma[195]% cc -xtarget=ultra3 -xarch=v8plusb -dalign -fns -fsimple=2 -ftrap=%none -xlibmil !!
cc -xtarget=ultra3 -xarch=v8plusb -dalign -fns -fsimple=2 -ftrap=%none -xlibmil -xO4 -DCMO_DEBUG_DETAIL -DUSE_DATACONN -c cmoisubs.c -o cmoisubs.o
cg: assertion failed in file ../src/ms_pipe/sp_interface.cc at line 689
cg: Internal error: constval annotation set on reg with multiple defs
cg: 1 errors
cc: cg failed for cmoisubs.c
teds@enigma[196]%
Does anyone have any ideas?
Thanks,
Ted

Hi There,
Form the error message it seems like a bug in cg.
Try the follwoing option and see if the bug goes away.
-Qoption cg -O0 or use -Qms_pipe-off.
Please refer C user's guide for usage.
....jagruti
Developers Technical Support
Sun Microsystems, http://www.sun.com/developers/support

Log4J-Error + Unexpected Database-Connector-Error

Hello!
I am trying to integrate a Report into an existing Java Eclipse-Project usind Crystal Reports for Eclipse.
To do this I am modifying the example program which comes together with the installation. I am trying to pass the data to the report directly via a POJO using the call
CRJavaHelper.passPOJO(...)
Now, when I try to open the report I get the following error:
log4j:WARN No appenders could be found for logger (com.businessobjects.reports.sdk.JRCCommunicationAdapter).
log4j:WARN Please initialize the log4j system properly.
Unerwarteter Datenbank-Connector-Fehler
(The last line would be "Unexpected Database-Connector-Error" in english.)
What am I doing wrong? I included log4j.jar into the build path of the project.
Thanx for your help!
UPDATE: Most errors are sitting 50cm in front of the screen. Dumb error on my side. Fixed it and it's working.
Edited by: QSOTech on May 18, 2009 1:33 PM

Error is fixed.
I created the report in Eclipse and used a Plain Old Java Object (POJO) as datasource. No other Database.
The problem was that the Object wasn't instanciated properly.

Frequent "Error Executing Database Query" errors?

I am getting frequent "Error Executing Database Query. Timed
out trying to establish connection" errors after upgrading our
server to version 7. These errors only occur with applications that
use Access databases and eventually cause the server to freeze up
and I am forced to restart the ColdFusion service.
Any ideas on what might be causing this issue? I have applied
all the hot fixes, updaters, etc, and updated the JDBC drivers and
yet this problem still continues. Thanks.

delete and re-create all you dsn.
Azadi Saryev
Sabai-dee.com
http://www.sabai-dee.com/

[SQL Anywhere 12.0.1.4086] Assertion failed

Hello,
the following exception occured while trying to connect to database:
*** FEHLER *** Assertierung fehlgeschlagen: 200130 (12.0.1.4086)[MC500]
Invalid page found in index
If Sybase Central is used to connect to DB, the following additional information is given:
[Sybase][ODBC Driver][SQL Anywhere]Interner Datenbankfehler *** FEHLER *** Assertierung fehlgeschlagen: 200130 (12.0.1.4086)[MC500]
Invalid page found in index - Transaktion wurde zurückgesetzt
SQLCODE=-301
SQLSTATE=HY000
What does it mean and how can it be repaired?
Best regards,
Wolfgang
(By the way: entering Data with Internet Explorer was not possible on this site)

See this forum post: An assertion failures on SQL Anywhere 12
If you don't get an answer here, try posting on that forum as well.

ETL Tasks failing Database driver error...Function Name : Execute Multiple

HI,
We have Installed OBI Apps V796. Below are the details.
OBI Apps V796
OBIEE 10.1.3.4.1
DAC 10.1.3.4.1
Informatica 8.6.0
We are getting the below error for the task "SDE_ORA_PartyPersonDimension_Customer" when we run the execution plan related to supply chain and order management analytics.
Severity     Timestamp     Node     Thread     Message Code     Message
ERROR     6/23/2009 8:25:54 PM     node01_obiee     WRITER_1_*_1     WRT_8229     Database errors occurred:
Database driver error...
Function Name : Execute Multiple
SQL Stmt : INSERT INTO W_PARTY_PER_DS(PARTY_TYPE,FST_NAME,FULL_NAME,MID_NAME,LAST_NAME,DEPARTMENT_NAME,CONTACT_ID,CONTACT_TYPE,FAX_PH_NUM,PAGER_NUM,MOBILE_NUM,WORK_PHONE,SEX_MF_CD,ETHNICITY_CD,MARITAL_STAT_CD,BIRTH_DT,BIRTH_PLACE,DEATH_DT,ST_ADDRESS,CITY,STATE,ZIPCODE,COUNTRY,EMAIL_ADDR,JOB_TITLE,ANNL_INCOME,SUPPRESS_EMAIL_FLG,PROF_TITLE,STATUS_CD,ST_ADDRESS2,ST_ADDRESS3,ST_ADDRESS4,CREATED_BY_ID,CHANGED_BY_ID,CREATED_ON_DT,CHANGED_ON_DT,AUX1_CHANGED_ON_DT,AUX2_CHANGED_ON_DT,AUX3_CHANGED_ON_DT,AUX4_CHANGED_ON_DT,SRC_EFF_FROM_DT,SRC_EFF_TO_DT,DELETE_FLG,DATASOURCE_NUM_ID,INTEGRATION_ID,TENANT_ID,X_CUSTOM,CUSTOMER_NUM) VALUES ( ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?) ".
As a work around we tried by changing the Target load type option to normal(previously it is bulk) and still the task failed. Also tried by enabling the Constraint based loading option and still the tas got failed.
Any suggestions............
As
Regards
Venkatesh.

Exactly same problem I'm also facing. The log is not showing any exact error information for the cause. And the surprise thing is when i'm running the debugger its inserting all the records. But when i run the task it is failing. Here is the log.
DIRECTOR> VAR_27028 Use override value [DataWarehouse] for session parameter:[$DBConnection_OLAP].
DIRECTOR> VAR_27028 Use override value [ORA_11_5_10] for session parameter:[$DBConnection_OLTP].
DIRECTOR> VAR_27028 Use override value [ORA_11_5_10.DATAWAREHOUSE.SDE_ORA11510_Adaptor.SDE_ORA_PartyPersonDimension_Customer_Full.log] for session parameter:[$PMSessionLogFile].
DIRECTOR> VAR_27028 Use override value [4] for mapping parameter:[$$DATASOURCE_NUM_ID].
DIRECTOR> VAR_27027 Use default value [] for mapping parameter:[mplt_BC_ORA_PartyPersonDimension.$$Hint1].
DIRECTOR> VAR_27027 Use default value [] for mapping parameter:[mplt_BC_ORA_PartyPersonDimension.$$Hint2].
DIRECTOR> VAR_27027 Use default value [] for mapping parameter:[mplt_BC_ORA_PartyPersonDimension.$$LAST_EXTRACT_DATE].
DIRECTOR> VAR_27028 Use override value [DEFAULT] for mapping parameter:[$$TENANT_ID].
DIRECTOR> TM_6014 Initializing session [SDE_ORA_PartyPersonDimension_Customer_Full] at [Mon Dec 28 19:10:26 2009].
DIRECTOR> TM_6683 Repository Name: [AA_REPOSITORY_SERVICE]
DIRECTOR> TM_6684 Server Name: [AA_INTEGRATION_SERVICE]
DIRECTOR> TM_6686 Folder: [SDE_ORA11510_Adaptor]
DIRECTOR> TM_6685 Workflow: [SDE_ORA_PartyPersonDimension_Customer_Full] Run Instance Name: [] Run Id: [1371]
DIRECTOR> TM_6101 Mapping name: SDE_ORA_PartyPersonDimension_Customer [version 1].
DIRECTOR> TM_6963 Pre 85 Timestamp Compatibility is Enabled
DIRECTOR> TM_6964 Date format for the Session is [MM/DD/YYYY HH24:MI:SS]
DIRECTOR> TM_6703 Session [SDE_ORA_PartyPersonDimension_Customer_Full] is run by 32-bit Integration Service [node01_obiee], version [8.6.1 HotFix6], build [0622].
MANAGER> PETL_24058 Running Partition Group [1].
MANAGER> PETL_24000 Parallel Pipeline Engine initializing.
MANAGER> PETL_24001 Parallel Pipeline Engine running.
MANAGER> PETL_24003 Initializing session run.
MAPPING> CMN_1569 Server Mode: [UNICODE]
MAPPING> CMN_1570 Server Code page: [UTF-8 encoding of Unicode]
MAPPING> TM_6151 The session sort order is [Binary].
MAPPING> TM_6185 Warning. Code page validation is disabled in this session.
MAPPING> TM_6156 Using low precision processing.
MAPPING> TM_6180 Deadlock retry logic will not be implemented.
MAPPING> TM_6307 DTM error log disabled.
MAPPING> TE_7022 TShmWriter: Initialized
MAPPING> DBG_21075 Connecting to database [BIDB], user [AABAW]
MAPPING> CMN_1716 Lookup [Lkp_W_ORA_PARTY_CONTACT_PS] uses database connection [Relational:DataWarehouse] in code page [MS Windows Latin 1 (ANSI), superset of Latin1]
MAPPING> CMN_1761 Timestamp Event: [Mon Dec 28 19:10:26 2009]
MAPPING> TE_7004 Transformation Parse Warning [IIF(ISNULL(CONTACT_PARTY_ID||DATASOURCE_NUM_ID), '', 'Contact')]; transformation continues...
MAPPING> CMN_1761 Timestamp Event: [Mon Dec 28 19:10:26 2009]
MAPPING> TE_7004 Transformation Parse Warning [<<PM Parse Warning>> [||]: operand converted to a string
... IIF(ISNULL(CONTACT_PARTY_ID||>>>>DATASOURCE_NUM_ID<<<<), '', 'Contact')]; transformation continues...
MAPPING> TM_6007 DTM initialized successfully for session [SDE_ORA_PartyPersonDimension_Customer_Full]
DIRECTOR> PETL_24033 All DTM Connection Info: [<NONE>].
MANAGER> PETL_24004 Starting pre-session tasks. : (Mon Dec 28 19:10:26 2009)
MANAGER> PETL_24027 Pre-session task completed successfully. : (Mon Dec 28 19:10:26 2009)
DIRECTOR> PETL_24006 Starting data movement.
MAPPING> TM_6660 Total Buffer Pool size is 12582912 bytes and Block size is 128000 bytes.
READER_1_1_1> DBG_21438 Reader: Source is [DEV01], user [apps]
READER_1_1_1> BLKR_16051 Source database connection [ORA_11_5_10] code page: [MS Windows Latin 1 (ANSI), superset of Latin1]
READER_1_1_1> BLKR_16003 Initialization completed successfully.
WRITER_1_*_1> WRT_8146 Writer: Target is database [BIDB], user [AABAW], bulk mode [ON]
WRITER_1_*_1> WRT_8106 Warning! Bulk Mode session - recovery is not guaranteed.
WRITER_1_*_1> WRT_8221 Target database connection [DataWarehouse] code page: [MS Windows Latin 1 (ANSI), superset of Latin1]
WRITER_1_*_1> WRT_8124 Target Table W_PARTY_PER_DS :SQL INSERT statement:
INSERT INTO W_PARTY_PER_DS(PARTY_TYPE,FST_NAME,FULL_NAME,MID_NAME,LAST_NAME,DEPARTMENT_NAME,CONTACT_ID,CONTACT_TYPE,FAX_PH_NUM,PAGER_NUM,MOBILE_NUM,WORK_PHONE,SEX_MF_CD,ETHNICITY_CD,MARITAL_STAT_CD,BIRTH_DT,BIRTH_PLACE,DEATH_DT,ST_ADDRESS,CITY,STATE,ZIPCODE,COUNTRY,EMAIL_ADDR,JOB_TITLE,ANNL_INCOME,CON_ACTIVE_FLG1,SUPPRESS_EMAIL_FLG,PROF_TITLE,STATUS_CD,ST_ADDRESS2,ST_ADDRESS3,ST_ADDRESS4,CREATED_BY_ID,CHANGED_BY_ID,CREATED_ON_DT,CHANGED_ON_DT,AUX1_CHANGED_ON_DT,AUX2_CHANGED_ON_DT,AUX3_CHANGED_ON_DT,AUX4_CHANGED_ON_DT,SRC_EFF_FROM_DT,SRC_EFF_TO_DT,DELETE_FLG,DATASOURCE_NUM_ID,INTEGRATION_ID,TENANT_ID,X_CUSTOM,CUSTOMER_NUM) VALUES ( ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?)
WRITER_1_*_1> WRT_8124 Target Table W_PARTY_PER_DS :SQL UPDATE statement:
UPDATE W_PARTY_PER_DS SET PARTY_TYPE = ?, FST_NAME = ?, FULL_NAME = ?, MID_NAME = ?, LAST_NAME = ?, DEPARTMENT_NAME = ?, CONTACT_ID = ?, CONTACT_TYPE = ?, FAX_PH_NUM = ?, PAGER_NUM = ?, MOBILE_NUM = ?, WORK_PHONE = ?, SEX_MF_CD = ?, ETHNICITY_CD = ?, MARITAL_STAT_CD = ?, BIRTH_DT = ?, BIRTH_PLACE = ?, DEATH_DT = ?, ST_ADDRESS = ?, CITY = ?, STATE = ?, ZIPCODE = ?, COUNTRY = ?, EMAIL_ADDR = ?, JOB_TITLE = ?, ANNL_INCOME = ?, CON_ACTIVE_FLG1 = ?, SUPPRESS_EMAIL_FLG = ?, PROF_TITLE = ?, STATUS_CD = ?, ST_ADDRESS2 = ?, ST_ADDRESS3 = ?, ST_ADDRESS4 = ?, CREATED_BY_ID = ?, CHANGED_BY_ID = ?, CREATED_ON_DT = ?, CHANGED_ON_DT = ?, AUX1_CHANGED_ON_DT = ?, AUX2_CHANGED_ON_DT = ?, AUX3_CHANGED_ON_DT = ?, AUX4_CHANGED_ON_DT = ?, SRC_EFF_TO_DT = ?, DELETE_FLG = ?, TENANT_ID = ?, X_CUSTOM = ?, CUSTOMER_NUM = ? WHERE SRC_EFF_FROM_DT = ? AND DATASOURCE_NUM_ID = ? AND INTEGRATION_ID = ?
WRITER_1_*_1> WRT_8124 Target Table W_PARTY_PER_DS :SQL DELETE statement:
DELETE FROM W_PARTY_PER_DS WHERE SRC_EFF_FROM_DT = ? AND DATASOURCE_NUM_ID = ? AND INTEGRATION_ID = ?
WRITER_1_*_1> WRT_8270 Target connection group #1 consists of target(s) [W_PARTY_PER_DS]
WRITER_1_*_1> WRT_8003 Writer initialization complete.
READER_1_1_1> BLKR_16007 Reader run started.
READER_1_1_1> RR_4029 SQ Instance [mplt_BC_ORA_PartyPersonDimension.SQ_HZ_PERSON_PARTY] User specified SQL Query [SELECT b1.party_id,        b1.party_type,        b1.person_name,        b1.person_first_name,        b1.person_middle_name,        b1.person_last_name,        b1.status,        b1.phone_area_code,        b1.phone_number,        b1.address1,        b1.address2,        b1.address3,        b1.address4,        b1.postal_code,        b1.city,        b1.state,        b1.country,        b1.email_address,        b1.date_of_birth,        b1.place_of_birth,        b1.date_of_death,        b1.gender,        b1.declared_ethnicity,        b1.marital_status,        b1.person_title,        b1.personal_income,        b1.do_not_mail_flag,        b1.created_by,        b1.creation_date,        b1.last_updated_by,        b1.last_update_date1 last_update_date,        b1.last_update_date2 last_update_date,        b1.last_update_date3 last_update_date,        b1.party_number,        b1.ACCNT_FLG FROM (SELECT              per.party_id,              pty.party_type,              per.person_name,              per.person_first_name,              per.person_middle_name,              per.person_last_name,              pty.status,              cnp.phone_area_code,              cnp.phone_number,              pty.address1,              pty.address2,              pty.address3,              pty.address4,              pty.postal_code,              pty.city,              pty.state,              pty.country,              pty.email_address,              per.date_of_birth,              per.place_of_birth,              per.date_of_death,              per.gender,              per.declared_ethnicity,              per.marital_status,              per.person_title,              per.personal_income,              pty.do_not_mail_flag,              per.created_by,              per.creation_date,              per.last_updated_by,              per.last_update_date last_update_date1,              pty.last_update_date last_update_date2,              cnp.last_update_date last_update_date3,              pty.party_number,              (CASE WHEN acct.PARTY_ID IS NOT NULL THEN 'Y' END) ACCNT_FLG,              MAX (per.person_profile_id) OVER (PARTITION BY per.party_id) max_person_profile_id,              per.person_profile_id       FROM hz_person_profiles per,            hz_parties pty,            hz_contact_points cnp,            (SELECT a1.party_id,                    COUNT (1) cnt             FROM (SELECT per.party_id                   FROM hz_person_profiles per                                      UNION ALL                   SELECT pty.party_id                   FROM hz_parties pty                                      UNION ALL                   SELECT --/*+ use_hash(pty cnp) index_ffs(pty, hz_parties_u1)*/                         pty.party_id                   FROM hz_parties pty,                        hz_contact_points cnp                   WHERE pty.party_id = cnp.owner_table_id                         ) a1             GROUP BY party_id) TEMP,            hz_cust_accounts acct       WHERE     per.party_id = TEMP.party_id             AND per.party_id = pty.party_id             AND pty.party_id = cnp.owner_table_id(+)             AND cnp.owner_table_name(+) = 'HZ_PARTIES'             AND cnp.contact_point_type(+) = 'PHONE'             AND cnp.primary_flag(+) = 'Y'             AND acct.PARTY_ID(+) = pty.PARTY_ID) b1 WHERE b1.person_profile_id = b1.max_person_profile_id HAVING COUNT (1) >= 0 GROUP BY b1.party_id,          b1.party_type,          b1.person_name,          b1.person_first_name,          b1.person_middle_name,          b1.person_last_name,          b1.status,          b1.phone_area_code,          b1.phone_number,          b1.address1,          b1.address2,          b1.address3,          b1.address4,          b1.postal_code,          b1.city,          b1.state,          b1.country,          b1.email_address,          b1.date_of_birth,          b1.place_of_birth,          b1.date_of_death,          b1.gender,          b1.declared_ethnicity,          b1.marital_status,          b1.person_title,          b1.personal_income,          b1.do_not_mail_flag,          b1.created_by,          b1.creation_date,          b1.last_updated_by,          b1.last_update_date1,          b1.last_update_date2,          b1.last_update_date3,          b1.party_number,          b1.ACCNT_FLG]
READER_1_1_1> RR_4049 SQL Query issued to database : (Mon Dec 28 19:10:26 2009)
WRITER_1_*_1> WRT_8005 Writer run started.
WRITER_1_*_1> WRT_8158
*****START LOAD SESSION*****
Load Start Time: Mon Dec 28 19:10:26 2009
Target tables:
W_PARTY_PER_DS
READER_1_1_1> RR_4050 First row returned from database to reader : (Mon Dec 28 19:10:29 2009)
LKPDP_1> DBG_21312 Lookup Transformation [Lkp_W_ORA_PARTY_CONTACT_PS]: Lookup override sql to create cache: SELECT W_ORA_PARTY_CONTACT_PS.DEPARTMENT AS DEPARTMENT, W_ORA_PARTY_CONTACT_PS.ORG_CONTACT_ID AS ORG_CONTACT_ID, W_ORA_PARTY_CONTACT_PS.CONTACT_NUMBER AS CONTACT_NUMBER, W_ORA_PARTY_CONTACT_PS.JOB_TITLE AS JOB_TITLE, W_ORA_PARTY_CONTACT_PS.DATASOURCE_NUM_ID AS DATASOURCE_NUM_ID, W_ORA_PARTY_CONTACT_PS.CONTACT_PARTY_ID AS CONTACT_PARTY_ID FROM W_ORA_PARTY_CONTACT_PS WHERE CUST_ACCOUNT_ROLE_ID=0 ORDER BY DATASOURCE_NUM_ID,CONTACT_PARTY_ID,DEPARTMENT,ORG_CONTACT_ID,CONTACT_NUMBER,JOB_TITLE
LKPDP_1> TE_7212 Increasing [Index Cache] size for transformation [Lkp_W_ORA_PARTY_CONTACT_PS] from [1048576] to [1392640].
LKPDP_1> TM_6660 Total Buffer Pool size is 609824 bytes and Block size is 65536 bytes.
LKPDP_1:READER_1_1> DBG_21438 Reader: Source is [BIDB], user [AABAW]
LKPDP_1:READER_1_1> BLKR_16051 Source database connection [DataWarehouse] code page: [MS Windows Latin 1 (ANSI), superset of Latin1]
LKPDP_1:READER_1_1> BLKR_16003 Initialization completed successfully.
LKPDP_1:READER_1_1> BLKR_16007 Reader run started.
LKPDP_1:READER_1_1> RR_4049 SQL Query issued to database : (Mon Dec 28 19:10:29 2009)
LKPDP_1:READER_1_1> RR_4050 First row returned from database to reader : (Mon Dec 28 19:10:30 2009)
LKPDP_1:TRANSF_1_1> DBG_21079 Creating Lookup Cache : (Mon Dec 28 19:10:30 2009)
LKPDP_1:READER_1_1> BLKR_16008 Reader run completed.
LKPDP_1:TRANSF_1_1> DBG_21682 Lookup table row count : 3247
LKPDP_1:TRANSF_1_1> DBG_21297 Lookup cache row count : 3238
LKPDP_1:TRANSF_1_1> DBG_21294 Lookup cache creation completed : (Mon Dec 28 19:10:30 2009)
LKPDP_1:TRANSF_1_1> CMN_1671 Created new cache files PMLKUP16713_5_0_1371W32.[dat/idx] in directory E:\Informatica\PowerCenter861\server\infa_shared\Cache for Lookup [Lkp_W_ORA_PARTY_CONTACT_PS].
LKPDP_1:TRANSF_1_1> DBG_21641 Lkp_W_ORA_PARTY_CONTACT_PS: Index cache size = [1392640], Data cache size = [2097152]
WRITER_1_*_1> WRT_8167 Start loading table [W_PARTY_PER_DS] at: Mon Dec 28 19:10:29 2009
WRITER_1_*_1> CMN_1761 Timestamp Event: [Mon Dec 28 19:10:30 2009]
WRITER_1_*_1> WRT_8229 Database errors occurred:
Database driver error...
Function Name : Execute Multiple
SQL Stmt : INSERT INTO W_PARTY_PER_DS(PARTY_TYPE,FST_NAME,FULL_NAME,MID_NAME,LAST_NAME,DEPARTMENT_NAME,CONTACT_ID,CONTACT_TYPE,FAX_PH_NUM,PAGER_NUM,MOBILE_NUM,WORK_PHONE,SEX_MF_CD,ETHNICITY_CD,MARITAL_STAT_CD,BIRTH_DT,BIRTH_PLACE,DEATH_DT,ST_ADDRESS,CITY,STATE,ZIPCODE,COUNTRY,EMAIL_ADDR,JOB_TITLE,ANNL_INCOME,CON_ACTIVE_FLG1,SUPPRESS_EMAIL_FLG,PROF_TITLE,STATUS_CD,ST_ADDRESS2,ST_ADDRESS3,ST_ADDRESS4,CREATED_BY_ID,CHANGED_BY_ID,CREATED_ON_DT,CHANGED_ON_DT,AUX1_CHANGED_ON_DT,AUX2_CHANGED_ON_DT,AUX3_CHANGED_ON_DT,AUX4_CHANGED_ON_DT,SRC_EFF_FROM_DT,SRC_EFF_TO_DT,DELETE_FLG,DATASOURCE_NUM_ID,INTEGRATION_ID,TENANT_ID,X_CUSTOM,CUSTOMER_NUM) VALUES ( ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?)
WRITER_1_*_1> CMN_1761 Timestamp Event: [Mon Dec 28 19:10:30 2009]
WRITER_1_*_1> WRT_8425 ERROR: Writer execution failed.
WRITER_1_*_1> WRT_8333 Rolling back all the targets due to fatal session error.
WRITER_1_*_1> CMN_1761 Timestamp Event: [Mon Dec 28 19:10:30 2009]
WRITER_1_*_1> CMN_1022 Database driver error...
CMN_1022 []
WRITER_1_*_1> CMN_1761 Timestamp Event: [Mon Dec 28 19:10:30 2009]
WRITER_1_*_1> WRT_8183 Rollback failed for the target [W_PARTY_PER_DS]
WRITER_1_*_1> CMN_1761 Timestamp Event: [Mon Dec 28 19:10:30 2009]
WRITER_1_*_1> WRT_8081 Writer run terminated. [Error in loading data to target table [W_PARTY_PER_DS]]
WRITER_1_*_1> WRT_8168 End loading table [W_PARTY_PER_DS] at: Mon Dec 28 19:10:30 2009
WRITER_1_*_1> WRT_8035 Load complete time: Mon Dec 28 19:10:30 2009
LOAD SUMMARY
============
WRT_8036 Target: W_PARTY_PER_DS (Instance Name: [W_PARTY_PER_DS])
WRT_8038 Inserted rows - Requested: 1568 Applied: 1552 Rejected: 0 Affected: 1552
WRITER_1__1> WRT_8043 ****END LOAD SESSION*****
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Dec 28 19:10:30 2009]
TRANSF_1_1_1> TM_6085 A fatal error occurred at transformation [W_PARTY_PER_DS], and the session is terminating.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Dec 28 19:10:30 2009]
TRANSF_1_1_1> TM_6085 A fatal error occurred at transformation [mplt_SA_ORA_PartyPersonDimension.EXP_PARTY_PERSON], and the session is terminating.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Dec 28 19:10:30 2009]
TRANSF_1_1_1> TM_6085 A fatal error occurred at transformation [mplt_SA_ORA_PartyPersonDimension.EXP_PARTY_PERSON], and the session is terminating.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Dec 28 19:10:30 2009]
TRANSF_1_1_1> TM_6085 A fatal error occurred at transformation [mplt_BC_ORA_PartyPersonDimension.EXP_PER_PARTY], and the session is terminating.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Dec 28 19:10:30 2009]
TRANSF_1_1_1> TM_6085 A fatal error occurred at transformation [mplt_BC_ORA_PartyPersonDimension.EXP_PER_PARTY], and the session is terminating.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Dec 28 19:10:30 2009]
TRANSF_1_1_1> TM_6085 A fatal error occurred at transformation [mplt_BC_ORA_PartyPersonDimension.SQ_HZ_PERSON_PARTY], and the session is terminating.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Dec 28 19:10:30 2009]
TRANSF_1_1_1> TM_6085 A fatal error occurred at transformation [mplt_BC_ORA_PartyPersonDimension.SQ_HZ_PERSON_PARTY], and the session is terminating.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Dec 28 19:10:30 2009]
TRANSF_1_1_1> TM_6085 A fatal error occurred at transformation [mplt_BC_ORA_PartyPersonDimension.SQ_HZ_PERSON_PARTY], and the session is terminating.
TRANSF_1_1_1> DBG_21511 TE: Fatal Transformation Error.
MANAGER> PETL_24031
***** RUN INFO FOR TGT LOAD ORDER GROUP [1], CONCURRENT SET [1] *****
Thread [READER_1_1_1] created for [the read stage] of partition point [mplt_BC_ORA_PartyPersonDimension.SQ_HZ_PERSON_PARTY] has completed.
     Total Run Time = [3.765415] secs
     Total Idle Time = [0.781122] secs
     Busy Percentage = [79.255350]
Thread [TRANSF_1_1_1] created for [the transformation stage] of partition point [mplt_BC_ORA_PartyPersonDimension.SQ_HZ_PERSON_PARTY] has completed.
     Total Run Time = [1.001440] secs
     Total Idle Time = [0.690994] secs
     Busy Percentage = [30.999937]
     Transformation-specific statistics for this thread were not accurate enough to report.
Thread [WRITER_1_*_1] created for [the write stage] of partition point [W_PARTY_PER_DS] has completed. The total run time was insufficient for any meaningful statistics.
MAPPING> CMN_1793 The index cache size that would hold [3238] rows in the lookup table for [Lkp_W_ORA_PARTY_CONTACT_PS], in memory, is [696320] bytes
MAPPING> CMN_1792 The data cache size that would hold [3238] rows in the lookup table for [Lkp_W_ORA_PARTY_CONTACT_PS], in memory, is [1908736] bytes
MANAGER> PETL_24005 Starting post-session tasks. : (Mon Dec 28 19:10:30 2009)
MANAGER> PETL_24029 Post-session task completed successfully. : (Mon Dec 28 19:10:30 2009)
MAPPING> TE_7216 Deleting cache files [PMLKUP16713_5_0_1371W32] for transformation [Lkp_W_ORA_PARTY_CONTACT_PS].
MAPPING> TM_6018 The session completed with [0] row transformation errors.
MANAGER> PETL_24002 Parallel Pipeline Engine finished.
DIRECTOR> PETL_24013 Session run completed with failure.
DIRECTOR> TM_6022
SESSION LOAD SUMMARY
================================================
DIRECTOR> TM_6252 Source Load Summary.
DIRECTOR> CMN_1740 Table: [SQ_HZ_PERSON_PARTY] (Instance Name: [mplt_BC_ORA_PartyPersonDimension.SQ_HZ_PERSON_PARTY])
     Output Rows [1788], Affected Rows [1788], Applied Rows [1788], Rejected Rows [0]
DIRECTOR> TM_6253 Target Load Summary.
DIRECTOR> CMN_1740 Table: [W_PARTY_PER_DS] (Instance Name: [W_PARTY_PER_DS])
     Output Rows [1552], Affected Rows [1552], Applied Rows [1552], Rejected Rows [0]
DIRECTOR> TM_6023
===================================================
DIRECTOR> TM_6020 Session [SDE_ORA_PartyPersonDimension_Customer_Full] completed at [Mon Dec 28 19:10:31 2009].

Unknown Database connector Error - Crystal Reports 2008 and OLE DB

Hi,
I want to create a report based on OLE DB provider.
Once I Select it from the Database Expert list I get this Error: "Unknown Database Connector Error", and the list is empty.
I am using Crystal Reports 2008 on Win XP SP2.
SQL Server 2005 is installed on the local machine.
If I create a UDL File and double click, I can see all OLE DB Providers on the machine.
What am I missing ?
Thanks,
Yuval.

Hi Friends,
Thank you all for trying to help.
- The installed MDAC version is 2.8 (It comes with XP SP2). I have tried installing it again and it says that it is already installed.
- I am not using a bussiness view. Just the simplest blank report in CR2008. I am not able to start it using OLE DB, once I want to choose a provider - I get the error, before even entering connection details such as username and password.
- I am able to build an ODBC report, but when trying to view it using Crystal Reports Windows Form Viewer (from within a .Net application) I get an error: "Failed to Open The Connection". It happens also with reports built on other machines using OLE DB.
Same report works fine with the same application on different machines and I cannot figure out what is the difference.
I think Something on my machine is not right.
Any suggestions ?
Thanks,
Yuval.

JDBC: Database-level error

Hi Folks,
I'm trying a JDBC to JDBC scenario and I'm getting the following error.
*Database-level error reported by JDBC driver while executing statement 'select * from EMPLOYEE where flag = 'X'.'. The JDBC driver returned the following error message: 'java.sql.SQLException: [Microsoft][ODBC Microsoft Access Driver] Syntax error (missing operator) in query expression 'flag = 'X'.'.'. For details, contact your database server vendor.*
My select statement is : select * from employee where flag = 'X'.
Regards,
Santosh

Hi,
Try with following sql query.
select * from employee where flag = "X".
Hope this helps.
Thanks and Regards,
Kalpesh

Database Connection Error: Cannot obtain error message from the server

I have a SQL statement that wants to add a temp table to the database.   The SQL statement works fine but when I try to add it via 'Add Command' feature in Crystal XI R2, I get the following error message:
Database Connection Error: Cannot obtain error message from the server
Any ideas?
Thanks in advance,
Zack H.

Hi Raghavendra,
I am using this in the 'Add Command' feature but I get the error message displayed in the subject line:
CREATE TABLE #TibetanYaks(
YakID char(4),
YakName char(20) )
INSERT INTO #TibetanYaks (YakID, YakName)
SELECT LastName, FirstName
FROM      Employee
WHERE      EmployeeID between '2000' and '3000'
I haven't tried to add this as a stored procedure but I imagine it will work as I have no problems yet with stored procedures. I simply want to be able to use temporary tables for the sole purpose of that session and not creating anything static in the database.
By the way, even though I get the error message, when I look on the backend database, I see that the temporary table was successfully created...its just not brought across correctly in Crystal.
Any ideas?
Zack H.

Error executing database query, invalid use of:

I have a problem ColdfusionMX tutorial when I get to add tags
on top of the code view. And I write the same thing as the
tutorial.
I get an error message that says:
Error executing database query.
error occurred while processing request.
Invalid use of ", ", () in query expression
I need help desperatly,
Geordeslys,

The web site you are accessing has experienced an unexpected
error.
Please contact the website administrator.
The following information is meant for the website developer
for debugging purposes.
Error Occurred While Processing Request
Error Executing Database Query.
Invalid use of '.', '!', or '()'. in query expression
'ARTISTS.ARTISTID = ART.ARTISTID AND ART.MEDIAID = MEDIA. MEDIAID'.
The error occurred in
C:\CFusionMX7\wwwroot\CFIDE\gettingstarted\tutorial\TMPhy0vtntf3u.cfm:
line 1
1 : <cfquery name="artwork" datasource="cftutorial">
2 : SELECT FIRSTNAME, LASTNAME, ARTNAME, DESCRIPTION, PRICE,
LARGEIMAGE, ISSOLD, MEDIATYPE
3 : FROM ARTISTS, ART, MEDIA
Dear CF_dev2,
Is that what you mean by complete CF code?
Georgeslys,
SQL SELECT FIRSTNAME, LASTNAME, ARTNAME, DESCRIPTION, PRICE,
LARGEIMAGE, ISSOLD, MEDIATYPE FROM ARTISTS, ART, MEDIA WHERE
ARTISTS.ARTISTID = ART.ARTISTID AND ART.MEDIAID = MEDIA. MEDIAID
DATASOURCE cftutorial
VENDORERRORCODE 3092
SQLSTATE
Resources:
Check the ColdFusion documentation to verify that you are
using the correct syntax.
Search the Knowledge Base to find a solution to your problem.
Browser Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1;
.NET CLR 1.0.3705; .NET CLR 1.1.4322; Media Center PC 4.0; IEMB3;
IEMB3)
Remote Address 127.0.0.1
Referrer
Date/Time 03-Sep-07 07:11 PM
Stack Trace (click to expand)
at
cfTMPhy0vtntf3u2ecfm1461475070.runPage(C:\CFusionMX7\wwwroot\CFIDE\gettingstarted\tutoria l\TMPhy0vtntf3u.cfm:1)
at
cfTMPhy0vtntf3u2ecfm1461475070.runPage(C:\CFusionMX7\wwwroot\CFIDE\gettingstarted\tutoria l\TMPhy0vtntf3u.cfm:1)
com.inzoom.adojni.ComException: Invalid use of
'.', '!', or
'()'. in query expression
'ARTISTS.ARTISTID = ART.ARTISTID
AND ART.MEDIAID = MEDIA. MEDIAID'. in Microsoft JET
Database Engine code=3092 Type=1
at com.inzoom.ado.Command.jniExecute(Native Method)
at com.inzoom.ado.Command.execute(Command.java:40)
at com.inzoom.jdbcado.Statement.exec(Statement.java:34)
at com.inzoom.jdbcado.Statement.execute(Statement.java:107)
at
coldfusion.server.j2ee.sql.JRunStatement.execute(JRunStatement.java:212)
at coldfusion.sql.Executive.executeQuery(Executive.java:753)
at coldfusion.sql.Executive.executeQuery(Executive.java:675)
at coldfusion.sql.Executive.executeQuery(Executive.java:636)
at coldfusion.sql.SqlImpl.execute(SqlImpl.java:236)
at
coldfusion.tagext.sql.QueryTag.doEndTag(QueryTag.java:500)
at
cfTMPhy0vtntf3u2ecfm1461475070.runPage(C:\CFusionMX7\wwwroot\CFIDE\gettingstarted\tutoria l\TMPhy0vtntf3u.cfm:1)
at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:152)
at
coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:349)
at
coldfusion.filter.CfincludeFilter.invoke(CfincludeFilter.java:65)
at
coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:225)
at
coldfusion.filter.RequestMonitorFilter.invoke(RequestMonitorFilter.java:51)
at coldfusion.filter.PathFilter.invoke(PathFilter.java:86)
at
coldfusion.filter.LicenseFilter.invoke(LicenseFilter.java:27)
at
coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:69)
at
coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8)
at
coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38)
at
coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38)
at
coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22)
at
coldfusion.filter.RequestThrottleFilter.invoke(RequestThrottleFilter.java:115)
at coldfusion.CfmServlet.service(CfmServlet.java:107)
at
coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:78)
at
jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:91)
at
jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
at
jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:257)
at
jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:541)
at
jrun.servlet.http.WebService.invokeRunnable(WebService.java:172)
at
jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:318)
at
jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:426)
at
jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:264)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)

Database Connector Error:'DAO Error Code:0xc03

hi Guys ,
I m getting an error while im adding parameter in my Crystal parameter.
The Error is-
Database Connector Error:'DAO Error Code:0xc03
Source:DAO Database
Description:Malformed GUID,in query expression
'Year=Year(#2010-04-27 11:23:15#)and Month <=Month({?End Date})'.'
I have used the following Sql Query:
SELECT Sum(Amount) AS Year_BUDGET, [Account Number]
FROM [Monthly Account Budgets]
WHERE Year = Year ({?End Date}) and Month <= Month({?End
Date})
GROUP BY [Account Number];
Plz try to give me any solution.

Is there really a carriage return (new line) between "{?End" and "Date}" in the Month() expression as shown above? It looks like Crystal isn't recognizing {?End Date} in that part of the formula and doing the substitution correctly.
HTH,
Carl

Database Connector Error when I connect SAP Crystal Report to dbase

When I connect SAP Crystal Report to dbase the error is "Database Connector Error", only when exist a field the type memo. I need to used this type of field, somebody that known how can I resolve this problem or some idea?
Thanks a lot for your help.

Hi,
there are sevaral SAP Notes for your problem. Can you specify the databaseof the source?
i.e. MS SQL Server -> Note 1212769
dbase -> Note 1209347
regards
-Phil

Unknown Database Connector Error using Oracle stored procedures

We are using an Oracle database for the first time with our Crystal Reports, and I am attempting to modify a report to use a new stored procedure. When I attempt to add either the new procedure, or to add a new copy of the existing procedure, I get an error message:
Unknown Database Connector Error
If I remove the existing procedure first (leaving no database objects at all), and then attempt to add back exactly the same stored procedure that I just removed, I get a different error message:
Database Connector Error: '42000:[Oracle][ODBC]Syntax error or access violation'
Neither of these errors is particularly helpful. The stored procedure in question works as is. I can run it in SQL Developer, and it also executes within the existing report if I run it. Unfortunately, it needs to be modified and given a new name, so I need to be able to add the new stored procedure to the report.
The operating system is Windows XP Professional version 2002 SP3. The Oracle version is 11g (11.2.0.2.0). Crystal reports version is Crystal Reports 2008 (12.3.0.601). The stored procedure returns a refcursor. The ODBC connection is created using the "Oracle in OraClient11g_home1" driver. When I test the connection, it tells me it was successful.
If it matters, the report is a Saba report.
Can anyone shed any light on what the problem is and how to fix it. If the solution is to upgrade the Windows version, that is under the control of our tech support and there is no information available as to when it will happen.

Yes - I had used the Set Datasource Location to point to the correct ODBC connection. I get the same results with an existing report as I do with a new blank report.
I have no idea where the service market place is. Honestly, I find the entire SAP site confusing. I found one reference to the PAM guide, but when I clicked on it, it insisted on a userid/password, and apparently the userid/password I have for this discussion group doesn't pass. I did find, eventually, a document called "Crystal Reports 2008 Service Pack 3 for Windows - Supported Platforms". When I read it, it tells me that it's compatible with Oracle 11g, generic ODBC, and Windows XP SP3, which is what we are using. I'm hoping that this document has equivalent information to the PAM guide.

SQL error: Internal database error *** ERROR *** Assertion failed: 201501 (10.0.1.3415)

Similar Messages

Maybe you are looking for

SQL error: Internal database error * ERROR * Assertion failed: 201501 (10.0.1.3415)