SQL in database

Hi, I need to know what users are doing in the bank, which instructions sql they are running. How to do that?

Well the answer is Auditing. But I would say that using it for all the users will be not a good idea both for performance and for the storage requirements. You should be doing it for those few users who are looking suspecious to you.
See here for the details for how to do it.You didnt tell us your db version so I am assuming 10g,
http://download.oracle.com/docs/cd/B19306_01/network.102/b14266/auditing.htm#i1008289
HTH
Aman....

Similar Messages

SAP IDES ECC5.0 (SQL 2005 Database) installation Error at Database instan.

At the time IDES ECC 5.0 installation (SQL 2005 database), I was copy all DVD on Hard drive and start setup then at installation of database instance, following Errors are occured. so I cant continue with the installation, if anyone have installation guide/or solve the following error please mail me at [email protected]
from Log file SAPCLUST
Interface access functions from dynamic library dbmssslib.dll loaded.myCluster
(3.5.Imp): 613: error when retrieving table description for physical table AABLG.
myCluster (3.5.Imp): 614: return code received from nametab is 32
myCluster (3.5.Imp): 296: error when retrieving physical nametab for table AABLG.
(CNV) ERROR: code page conversion failed
rc = 2
from sappool.log
Interface access functions from dynamic library dbmssslib.dll loaded.failed to read short nametab of table ARCH_NUM (rc=32)conversion failed for row 0 of table VARKEY = ⁘
(CNV) ERROR: code page conversion failed
So please send me solution/ or any configuration need for SQL 2005 / installation guide thanks

This may be hard disk problem, some file not able to write on HDD.
Regards
Rajnish

Can Oracle view refer a table in Sql Server Database

Can a view created in Oracle database refer a table created in SQL Server database. If yes, how do we do it. Code will be very help full.
Again, if yes does it require any special software and what would be price of that software.
Thanks for your response in advance.
Venkat Sathiamurthy

You would need to configure Oracle Heterogeneous Connectivity to create a database link to the SQL Server system. This can either be done via the Oracle Transparent Gateway for Microsoft SQL Server, which retails for $15,000 per server at http://store.oracle.com or by configuring Oracle Generic Connectivity and using ODBC to go after the SQL Server data. Depending on the operating system you run Oracle on, there may be a free (or cheap) ODBC driver for SQL Server that could be used.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Trigger to populate table in sql server database

Maybe this isn't the right board to post this in, but here goes:
We have an Oracle 9i database, with a table that get's populated with a new record every minute or so.
We need to take some values from the newly inserted record and populate a table in a sql server database instantly. The people requesting this have not said as much, but I am thinking deletes and updates would need to be the same.
How would it be best to do this? My first thought was a trigger on the oracle table that populates the sql server table via heterogeneous db link.
Any other ideas?
thanks in advance..
update- repost in heterogeneous forum
Edited by: user571263 on Mar 15, 2011 11:25 AM

Maybe this isn't the right board to post this inI think you are right:
Heterogeneous Connectivity
Werner

How can I connect to SQL server database thru local network by using JSP?

I'm currently doing a project by using JSP..And I need to display record from the SQL Server database in our school's local network. May I know how can I do that? How can I write the code so that I can able to access the SQL Server databsase Throught school's network by using JSP? Please tell me step by step how can I do that. I'm using Tomcat 4.1 as Web Server. And I had J2SE and J2EE installed in my computer.

first you have to establish a ODBC DSN on your computer,
that connects to the database...you can do that from your control pannel.
i assume that the TOMCAT server is residing on your computer....(if the webserver is in other computer then you would have to create a System DSN on the data sources ODBC option in the settings>control pannel of that machine)
then you can use that DSN name to connect to the data base from the class file....for further assistance on how to create the class that access the tutorials in sun site.
regards
G

How can I get the data array from SQL Server Database?

Hi,
I can write a data array(2D)into a table of my SQL Server Database. The data array was writen to a column with image type. I know a data array is transformed a binary string when writing into database, but I dont know how to get the data array when I fetch the binary string from database.
My question is:
How to transform the binary string into data array? which vi's should I use? I have tried unflatten from string but failed.
Any response is appriciated.
Red

happyxh0518 wrote:
> I can write a data array(2D)into a table of my SQL Server Database.
> The data array was writen to a column with image type. I know a data
> array is transformed a binary string when writing into database, but I
> dont know how to get the data array when I fetch the binary string
> from database.
>
> My question is:
> How to transform the binary string into data array? which vi's should
> I use? I have tried unflatten from string but failed.
In order to use Unflatten from string you first need to Flatten it
before writing it. Also depending on the database driver, the returned
data may actually not be binary but Hexadecimal encoded ASCII which you
would first have to decode to binray.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

How to connect a PDF form to SQL server database through web service?

Hi,
I'm new to LiveCycle designer. I have designed a PDF form in LC designer ES2, which suppose to take a personnel number and retrieve the personnel information from a SQL server database. Currently its working fine with XML data and a search button, but I need to securly connect to a database through web service. I know how to connect to a wsdl file through designer. What I need is a wsdl file to connect the form to database. For this purpose, is there any WSDL code to use as the web service?
I really appreciate your help and advice.

Hi,
I'm new to LiveCycle designer. I have designed a PDF form in LC designer ES2, which suppose to take a personnel number and retrieve the personnel information from a SQL server database. Currently its working fine with XML data and a search button, but I need to securly connect to a database through web service. I know how to connect to a wsdl file through designer. What I need is a wsdl file to connect the form to database. For this purpose, is there any WSDL code to use as the web service?
I really appreciate your help and advice.

Reporting from a MS SQL Server database

Hi,
I'm trying to build an interface with JSP and J2SE for a MS SQL Server database, and I would like to know if there are any existing technologies that would facilitate report generation. I'm aware of Crystal Reports for JBuilder but I would prefer a free solution. Thanks in advance!

Try JasperReports
http://jasperreports.sourceforge.net/
HTH

Sql developer won't connect with SQL server database on cluster

Hello,
I have a microsoft SQL server database on a windows cluster. Name for this cluster is like XXX/YYY
When I try to connect to this database with SQL developer, I get a failure, mentioning:
"Status : Failure -Cannot connect to Miscrosoft SQL Server on XXX/YYY"
As far as I know, I have installed the correct jtds driver (version 1.2.5), since I can connect to sql server databases on single server hosts.
Does anyone know how to connect to databases on windows clusters?
Edited by: Ingmar on Jan 16, 2012 4:08 PM
Edited by: Ingmar on Jan 16, 2012 4:22 PM

Hi Ingmar,
Try this is in the port box
1433/dbname;instance=YYY
dbname can be omitted
-Turloch
SQL Developer team
1/Giving an instance name in SQLDeveloper connection to SQL Server (from August 2011)
MS SQL Server Connection
The correct syntax to deal with this is in the port box
1433/dbname;instance=instance
dbname can be omitted
2/cluster configuration (uses instance name)
http://stackoverflow.com/questions/1160024/jdbc-connect-string-for-sql-server-cluster
where vvv\iii is the cluster address: jdbc address is:
"jdbc:sqlserver://vvv;instanceName=iii"
3/jtds url details available in
http://jtds.sourceforge.net/faq.html

Configure Synchronization Connections An error has occurred while accessing the SQL Server database

Hi,
i am getting following error message
Central Administration --> Synchronization Connections
An error has occurred while accessing the SQL Server database or the SharePoint Server Search service.
If this is the first time you have seen this message, try again later. If this problem persists, contact your administrator.
Central Administration --> Manage Profile Service: User Profile Service Application --> Manage User Properties
Error
An unexpected error has occurred.
Troubleshoot issues with Microsoft SharePoint Foundation.
Correlation ID: 3bce5a11-f2dc-4788
Please tell how to fix it.
iffi

Event ID 5555 -> i have change the Timer jobs recycling time AM to PM
for User profile page not display number of count in the page first check services , connection ,
IISRESET /NOFORCE / timer services restart
Deepesh Yevle MCTS

How can I get an accurate count of computers (workstations) logged in to my SQL Server database?

We license our software by number of workstations.
I have a query that I have used for years to get an accurate count of the workstations logged in to my SQL Server database. For simplicity, all users use the same login name/password. This is built in to the script that attaches to the DB. They
have access only to that DB with the exception of
USE [Master] GRANT VIEW SERVER STATE to MyUser
The query that has been working is below:
Basically this relies on the mac address (Master.dbo.sysprocesses.net_addre
SELECT COUNT(Users) AS UserCount FROM (SELECT COUNT(Master.dbo.sysprocesses.hostname) AS Users FROM Master.dbo.sysprocesses LEFT OUTER JOIN Master.dbo.sysdatabases ON Master.dbo.sysdatabases.dbid = Master.dbo.sysprocesses.dbid WHERE (Master.dbo.sysdatabases.name = 'MyDatabase') GROUP BY Master.dbo.sysprocesses.net_address) AS UserCount_1
ss), since both Workstation names and ip addresses can be duplicated.
Recently this has stopped working at a number of customers. Suddenly individual workstations are showing multiple net addresses for the same workstation causing a substantial overcount of users. This may be related to SQL Server 2012 - not sure.
What I need is a very reliable way to get a count of workstations logged in to my database.
If anyone can tell me why I am suddenly getting multiple net_addresses for each workstation and how to prevent that that would be one possible solution.
Otherwise if anyone can give me a rock solid way to get a workstation count other than the above that would be great. Our largest customer is 50 users by the way.
Thanks in advance for any help.
Kim

I think your count is getting skewed because of duplicate rows in sysprocesses because of parallelism. Add DISTINCT to your query:
SELECT COUNT(Users) AS UserCount
FROM
( SELECT COUNT(DISTINCT Master.dbo.sysprocesses.hostname) AS Users
FROM Master.dbo.sysprocesses LEFT OUTER JOIN Master.dbo.sysdatabases
ON Master.dbo.sysdatabases.dbid = Master.dbo.sysprocesses.dbid
WHERE (Master.dbo.sysdatabases.name = 'MyDatabase'
GROUP BY Master.dbo.sysprocesses.net_address) AS UserCount_1
Satish Kartan www.sqlfood.com

How can I Purge in SQL Express database?

For development purposes, we created a Hyper-V VM running Windows 7 with BizTalk Server 2010 installed running against a SQL Express database. We also installed Visual Studio (licensed) for map development.
Over time, the BizTalk tables grow, and are taking up way too much storage space.
I looked at the "Microsoft recommended" method of purging the BizTalk database/tables, but it requires enabling a DTA job in SQL Agent which is not available in SQL Express (as far as I know.)
How can I purge the BizTalk tables in SQL Express to reclaim storage space?
Since this is a development platform, I do NOT care about ANY historical data being retained, only "system" data (such as parties, etc.)
Thanks!!
Jim Barr

You can use the various cleanup scripts to purge the database. Details:
http://biztalkscheduledtask.codeplex.com/
Of course, you should not be using SQL Express.

Exporting data from SQL Server database to Oracle database

Hello All,
We need to replicate a table's data of SQL Server database to Oracle database.
Can this task be accomplished using Import/Export wizard or Linked servers?
Can help me regarding which Oracle data access components should i download to do this?
I am using SQL Server 2012.
And i have Oracle 11g release 2 client installed in my system.
Thanks in Advance.
Thanks and Regards, Readers please vote for my posts if the questions i asked are helpful.

Yes you can definitely transfer data from SQL server to Oracle Have a look at below links
Export SQL server data to Oracle Using SSIS
Use OLEDB data provider to transfer data from SQL server to Oracle
Using Import Export Wizard
Similar thread
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

How to create a .mdf SQL Server database from a Data-Tier Application file that has data?

This is a noob question, though I do use SQL Server databases all the time with Entity Framework when I code in C# using Visual Studio 2013. The development environment is found below at [A]. I am trying to make a clone of a SQL Server 2008 R2
database (.mdf) that exists online. I can read, connect and work with this database in Visual Studio 2013, but I wish to make a local copy of the database, as an .MDF file. Somewhere in my notes I have a way of creating a local copy from
an online database when using Visual Studio but I forgot how (it seems, reviewing my notes, that it deals with ADO.NET which is deprecated in Visual Studio 2013 these days, or so it seems). So I'm looking for another way. What I did was create
(or export) a "Data-Tier Application File" from the online SQL Server database, with data, and it seems to have worked in that this Data-Tier Application file exists on my hard drive and seems to have data in it ("SQL Server Replication Snapshot"
is the format it seems). It contains skeleton code to create a database, but when I tried to execute it with SQL Server 2014 Management Studio, I got a bunch of errors.
So my question is:
1) Can I somehow create a .MDF SQL Server Database from an Data-Tier Application file that has data? What tool do I use? I saw this link, http://social.technet.microsoft.com/wiki/contents/articles/2639.how-to-use-data-tier-application-import-and-export-with-a-windows-azure-sql-database.aspx
and it relates to Azure, but is there a tool for C#Visual Studio 2013, standalone?
2) If there's an easy way to create a .mdf SQL Server Database file from an online file, within SQL Server Management Studio? I don't think so, since it would require Administrator permissions on the online server, which I don't have. I have permission
to read, update, delete the online database file, but strangely not to download it (the service I use has a tool for backup, but not for download).
3) same question as 2), but for Visual Studio 2013? I don't think so, since I notice none of the templates even mentions ADO.NET anymore, but instead they go with Entity Framework. Using EF I can of course do anything I want with the online database
(CRUD), but it remains online. Maybe there's a switch to make a local copy? I guess I could write a short program to suck all the data out of the online database and put it into a new, duplicate database having the same tables, that I create on
my localhost, but my question here is if there's an easier way than this, maybe a tool or command I can run from inside Visual Studio?
Any advice on any of the above questions is appreciated.
Thank you,
Paul
[A] Microsoft Visual Studio Professional 2013
Version 12.0.21005.1 REL
Microsoft .NET Framework
Version 4.5.51641
Microsoft Web Developer Tools 2013   2.0.40926.0
SQL Server Data Tools   12.0.30919.1
Microsoft SQL Server Data Tools
Windows Azure Mobile Services Tools   1.0
Windows Azure Mobile Services Tools

Thanks but these links are too general to help.
"2. what do you mean by online file?" - I mean the SQL Server database file is on a remote web server that I rent from, but I am not the administrator of. I can access my database using SQL Server Authentication, but nothing more.
Paul
What do you mean by too general? It explains on how you can use data tier application to create and deploy databases
May be this will help you to understand better
http://www.databasejournal.com/features/mssql/article.php/3911041/Creating-Data-Tier-Applications--in-SQL-Server-2008-R2.htm
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Sql 2000 database role

Hi ,
I want to grant execute permission to all SP's in SQL 2000 database, when I tried to create a db_execprocs role it is throwing an error near ROLE, and when I googled I have found a script as
CREATE PROCEDURE dbo.spGrantExectoAllStoredProcs @user ABC\venkat
AS
-- Object Name: spGrantExectoAllStoredProcs
-- Author: Edgewood Solutions
-- Development Date: 03.19.2007
-- Called By: TBD
-- Description: Issue GRANT EXEC statement for all stored procedures
-- based on the user name that is passed in to this stored procedure
-- Project: SQL Server Security
-- Database: User defined databases
-- Business Process: SQL Server Security
-- Num | CRF ID | Date Modified | Developer | Description
-- 001 | N\A | 03.15.2007 | Edgewood | Original code for the GRANT
-- EXEC process
SET NOCOUNT ON
-- 1 - Variable declarations
DECLARE @CMD1 varchar(8000)
DECLARE @MAXOID int
DECLARE @OwnerName varchar(128)
DECLARE @ObjectName varchar(128)
-- 2 - Create temporary table
CREATE TABLE #StoredProcedures
(OID int IDENTITY (1,1),
StoredProcOwner varchar(128) NOT NULL,
StoredProcName varchar(128) NOT NULL)
-- 3 - Populate temporary table
INSERT INTO #StoredProcedures (StoredProcOwner, StoredProcName)
SELECT u.[Name], o.[Name]
FROM dbo.sysobjects o
INNER JOIN dbo.sysusers u
ON o.uid = u.uid
WHERE o.Type = 'P'
AND o.[Name] NOT LIKE 'dt_%'
-- 4 - Capture the @MAXOID value
SELECT @MAXOID = MAX(OID) FROM #StoredProcedures
-- 5 - WHILE loop
WHILE @MAXOID > 0
BEGIN
-- 6 - Initialize the variables
SELECT @OwnerName = StoredProcOwner,
@ObjectName = StoredProcName
FROM #StoredProcedures
WHERE OID = @MAXOID
-- 7 - Build the string
SELECT @CMD1 = 'GRANT EXEC ON ' + '[' + @OwnerName + ']' + '.'
+ '[' + @ObjectName + ']' + ' TO ' + '[' + ABC\venkat + ']'
-- 8 - Execute the string
-- SELECT @CMD1
EXEC(@CMD1)
-- 9 - Decrement @MAXOID
SET @MAXOID = @MAXOID - 1
END
-- 10 - Drop the temporary table
DROP TABLE #StoredProcedures
SET NOCOUNT OFF
GO
this too is throwin an error as:
Msg 170, Level 15, State 1, Procedure spGrantExectoAllStoredProcs, Line 1
Line 1: Incorrect syntax near '\'.
Msg 170, Level 15, State 1, Procedure spGrantExectoAllStoredProcs, Line 52
Line 52: Incorrect syntax near '\'.
Can someone help me with this.
I just need to grant execute permission on all SP's to 1 database only.
Thanks.

First create the procedure and then call the procedure with parameter.
Try this
CREATE PROCEDURE dbo.spGrantExectoAllStoredProcs @user varchar(20)
AS
-- Object Name: spGrantExectoAllStoredProcs
-- Author: Edgewood Solutions
-- Development Date: 03.19.2007
-- Called By: TBD
-- Description: Issue GRANT EXEC statement for all stored procedures
-- based on the user name that is passed in to this stored procedure
-- Project: SQL Server Security
-- Database: User defined databases
-- Business Process: SQL Server Security
-- Num | CRF ID | Date Modified | Developer | Description
-- 001 | N\A | 03.15.2007 | Edgewood | Original code for the GRANT
-- EXEC process
SET NOCOUNT ON
-- 1 - Variable declarations
DECLARE @CMD1 varchar(8000)
DECLARE @MAXOID int
DECLARE @OwnerName varchar(128)
DECLARE @ObjectName varchar(128)
-- 2 - Create temporary table
CREATE TABLE #StoredProcedures
(OID int IDENTITY (1,1),
StoredProcOwner varchar(128) NOT NULL,
StoredProcName varchar(128) NOT NULL)
-- 3 - Populate temporary table
INSERT INTO #StoredProcedures (StoredProcOwner, StoredProcName)
SELECT u.[Name], o.[Name]
FROM dbo.sysobjects o
INNER JOIN dbo.sysusers u
ON o.uid = u.uid
WHERE o.Type = 'P'
AND o.[Name] NOT LIKE 'dt_%'
-- 4 - Capture the @MAXOID value
SELECT @MAXOID = MAX(OID) FROM #StoredProcedures
-- 5 - WHILE loop
WHILE @MAXOID > 0
BEGIN
-- 6 - Initialize the variables
SELECT @OwnerName = StoredProcOwner,
@ObjectName = StoredProcName
FROM #StoredProcedures
WHERE OID = @MAXOID
-- 7 - Build the string
SELECT @CMD1 = 'GRANT EXEC ON ' + '[' + @OwnerName + ']' + '.'
+ '[' + @ObjectName + ']' + ' TO ' + '[' + @user + ']'
-- 8 - Execute the string
-- SELECT @CMD1
EXEC(@CMD1)
-- 9 - Decrement @MAXOID
SET @MAXOID = @MAXOID - 1
END
-- 10 - Drop the temporary table
DROP TABLE #StoredProcedures
SET NOCOUNT OFF
GO
dbo.spGrantExectoAllStoredProcs 'abc\venkat'
OR
directly execute the below script
Change the @user parameter with valid account
DECLARE @User Varchar(20)
DECLARE @CMD1 varchar(8000)
DECLARE @MAXOID int
DECLARE @OwnerName varchar(128)
DECLARE @ObjectName varchar(128)
SET @user='abc\venkat'
-- 2 - Create temporary table
CREATE TABLE #StoredProcedures
(OID int IDENTITY (1,1),
StoredProcOwner varchar(128) NOT NULL,
StoredProcName varchar(128) NOT NULL)
-- 3 - Populate temporary table
INSERT INTO #StoredProcedures (StoredProcOwner, StoredProcName)
SELECT u.[Name], o.[Name]
FROM dbo.sysobjects o
INNER JOIN dbo.sysusers u
ON o.uid = u.uid
WHERE o.Type = 'P'
AND o.[Name] NOT LIKE 'dt_%'
-- 4 - Capture the @MAXOID value
SELECT @MAXOID = MAX(OID) FROM #StoredProcedures
-- 5 - WHILE loop
WHILE @MAXOID > 0
BEGIN
-- 6 - Initialize the variables
SELECT @OwnerName = StoredProcOwner,
@ObjectName = StoredProcName
FROM #StoredProcedures
WHERE OID = @MAXOID
-- 7 - Build the string
SELECT @CMD1 = 'GRANT EXEC ON ' + '[' + @OwnerName + ']' + '.'
+ '[' + @ObjectName + ']' + ' TO ' + '[' + @user + ']'
-- 8 - Execute the string
-- SELECT @CMD1
EXEC(@CMD1)
-- 9 - Decrement @MAXOID
SET @MAXOID = @MAXOID - 1
END
-- 10 - Drop the temporary table
DROP TABLE #StoredProcedures
--Prashanth

Moving an existing SQL Express Database to SQL Server 2008 (included in SBS2011) help!

I have software that uses SQL 2005 right now, but the database is close the max size (4 GB). I have SBS2011 installed and it includes SQL 2008 and SQL 2008R2. I want to move the database to the 2008 version that can that can handle larger databases.
I'm not an SQL expert, but have some experience with it. What I need are some directions on how to make this change without causing any problems with the system, including setting up the SQL server so it will have all the same settings as the old one.
This is a practice management software.
Thanks in advance for any help. Harvey

Hi,
I think you can upgrade SQL Server 2005 to later version of SQL Server rather than moving the existing database to another SQL Server instance.
Upgrade SQL Server 2005 SP2 Express to SQL Server 2008 R2 Express and SQL Server 2005 SP4 SQL Server 2012 Express. And you will have maximum 10 GB per database.
Make sure that your operation system is compatible with SQL Server
version which you want to upgrade to. For more information, see:
http://msdn.microsoft.com/en-us/library/ms143506(v=sql.105).aspx#SSE_x64
It is possible to backup and restore the database on another instance and modify the database path in the software.
You need to test it in your test environment first before making changes in the production environment.
In addition, you need to consult with the software developer and see if there is any potential issue.
Upgrade to SQL Server 2012 Using the Installation Wizard (Setup)
http://technet.microsoft.com/en-us/library/ms144267.aspx
Back Up and Restore of SQL Server Databases
http://technet.microsoft.com/en-us/library/ms187048.aspx
Thanks.
Tracy Cai
TechNet Community Support

SQL in database

Similar Messages

Maybe you are looking for