Sql developer won't connect with SQL server database on cluster

Hello,
I have a microsoft SQL server database on a windows cluster. Name for this cluster is like XXX/YYY
When I try to connect to this database with SQL developer, I get a failure, mentioning:
"Status : Failure -Cannot connect to Miscrosoft SQL Server on XXX/YYY"
As far as I know, I have installed the correct jtds driver (version 1.2.5), since I can connect to sql server databases on single server hosts.
Does anyone know how to connect to databases on windows clusters?
Edited by: Ingmar on Jan 16, 2012 4:08 PM
Edited by: Ingmar on Jan 16, 2012 4:22 PM

Hi Ingmar,
Try this is in the port box
1433/dbname;instance=YYY
dbname can be omitted
-Turloch
SQL Developer team
1/Giving an instance name in SQLDeveloper connection to SQL Server (from August 2011)
MS SQL Server Connection
The correct syntax to deal with this is in the port box
1433/dbname;instance=instance
dbname can be omitted
2/cluster configuration (uses instance name)
http://stackoverflow.com/questions/1160024/jdbc-connect-string-for-sql-server-cluster
where vvv\iii is the cluster address: jdbc address is:
"jdbc:sqlserver://vvv;instanceName=iii"
3/jtds url details available in
http://jtds.sourceforge.net/faq.html

Similar Messages

  • Sql developer impossible to connect to  the server MSS at localhost

    hi,
    plz help i can't connect to sql server 2008 via SQL Developer i want to migrate a database with online migrate.
    thank's

    The 'connection refused' error probably means that TCP/IP connections haven't been enabled for the MSSQL server.
    However, SQL Developer doesn't work with the microsoft driver, you must use jtds.
    To find out why the connection tab isn't appearing try running sqldeveloper from <sqldev>\sqldeveloper\bin\sqldeveloper.exe. This will open a console which may show useful information.
    Remember you need to select the JAR file, not the directory.

  • Sql developer won't connect to internet to check for updates

    Hi all,
    When I try to check the latest updates, Sql Developer (2.1.0.63) says it can't access to Internet in order to search for updates.
    The credentials that I gave are correct (proxy, port, username, password) : when I click on the "Test Proxy" button, it says everything is OK.
    But when I click on the "OK" button, it won't connect.
    Then I click on the "Cancel" button, and check the details and get the following stack trace:
    org.xml.sax.SAXParseException: <Line 6, Column 39>: XML-20125: (Fatal Error) Attribute value should start with quote.
         at oracle.xml.parser.v2.XMLError.flushErrorHandler(XMLError.java:422)
         at oracle.xml.parser.v2.XMLError.flushErrors1(XMLError.java:287)
         at oracle.xml.parser.v2.NonValidatingParser.parseAttrValue(NonValidatingParser.java:1645)
         at oracle.xml.parser.v2.NonValidatingParser.parseAttr(NonValidatingParser.java:1550)
         at oracle.xml.parser.v2.NonValidatingParser.parseAttributes(NonValidatingParser.java:1483)
         at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1322)
         at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:368)
         at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:314)
         at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:225)
         at oracle.javatools.xml.esax.spi.ExtensibleSAXParser.parse(ExtensibleSAXParser.java:65)
         at oracle.ideimpl.webupdate.parser.MasterListParser.parse(MasterListParser.java:47)
         at oracle.ideimpl.webupdate.CheckMasterListRunnable.run(CheckMasterListRunnable.java:148)
         at java.lang.Thread.run(Thread.java:619)
    What is wrong ???
    Thank you for your help,
    Phil.
    Edited by: user3182799 on 15 janv. 2010 08:56

    Did anybody meet the same problem, please ?

  • Failed to Establish Connection With SQL Database Server in Essbase studio

    I am using Essbase Studio Release 11.1.2.1.00 for developing XOLAP cubes and deploying them on to Essbase server .
    I am getting the below Error while deploying the cube onto Essbase server.
    error : Failed to deploy Essbase cube.
    Caused by: Failed to build Essbase cube dimension: (TimeHierarchy) .
    Caused by: Cannot get async process state. Essbase Error(1021001): Failed to Establish Connection With SQL Database Server.
    From Essbase Studio -> Datasources tab, I could able to connect to SQL Database server..Please let me know how to resolve this issue.
    Thanks,
    Swathi

    Thanks for the reply.
    There was a problem with my Essbase Server..so now i m pointing to other server.
    now I am getting the below Error:
    Failed to deploy Essbase cube.
    Caused by: Cannot end incremental build. Essbase Error(1025008): Join Specification near [[TIMEID]] is invalid. Please verify the Xolap Schema file.
    Please let me know how can I validate my cube and what changes might require in my Cube definitions?

  • Connectivity with sql server

    Dear community members;
    I am using Oracle 10g DB. Now I want to connect with SQL Server 2005. Is there any possiblity for connectivity. Because we have to pick some data from sqlserver on online transaction entry time.
    Waiting for usefull response.
    Thanks
    Shahab Ahmed Khan

    I am using oracle 11gR1 on windows 2003.
    This is my initaccessdb.ora(Path HS/ADMIN)
    HS_FDS_CONNECT_INFO = ACCESSDB
    HS_FDS_TRACE_LEVEL = OFF
    Listner File
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (ADDRESS = (PROTOCOL = TCP)(HOST = APPSERVER)(PORT = 1521))
    SID_LIST_LISTENER=
    (SID_LIST=
    (SID_DESC=
    (SID_NAME=PLSExtProc)
    (ORACLE_HOME=E:\app\Administrator\product\11.1.0\db_1)
    (PROGRAM=extproc)
         (SID_DESC =
         (SID_NAME = accessdb)
    (ORACLE_HOME = E:\app\Administrator\product\11.1.0\db_1)
    (PROGRAM = ACCESSDB)
         (ENVS=LD_LIBRARY_PATH=D:\)      
    TNSNAME.ORA
    ORCL =
    (DESCRIPTION =
         (ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.0.14)(PORT = 1521))
         (CONNECT_DATA =
              (SERVER = DEDICATED)
              (SERVICE_NAME= ORCL)
    ACCESSDB =
    (DESCRIPTION=
         (ADDRESS =(PROTOCOL = TCP)(HOST=172.16.0.14)(PORT=1521))
              (CONNECT_DATA =
              (SERVICE_NAME=ACCESSDB))
                   (HS = OK)
    I successfully completed all steps as mentioned in your sending links documents but when i test my dblink query it gives the error message
    SQL> conn sys as sysdba
    Enter password:
    Connected.
    SQL> conn ahmed
    Enter password:
    Connected.
    SQL> drop database link test;
    Database link dropped.
    SQL> create database link test using 'ACCESSDB';
    Database link created.
    SQL> SELECT * FROM EMPLOYEE@TEST;
    SELECT * FROM EMPLOYEE@TEST
    ERROR at line 1:
    ORA-28545: error diagnosed by Net8 when connecting to an agent
    Unable to retrieve text of NETWORK/NCR message 65535
    ORA-02063: preceding 2 lines from TEST
    Note: Please tell me that should i install ODBC driver ("Microsoft Access Driver *.mdb).If this should be installed then i have done correctly.
    Thanks

  • Connecting with SQL Server

    Dear All,
    I m new to JDeveloper and want to make a connection with SQL Server 2008 but in Connection Dialogue with following Settings :-
    Connection Type: SQL Server
    UserName: sa
    Password: ******
    HostName: EServer
    DatabaseName: DBName
    PortNumber: 1430
    Driver Class: com.microsoft.sqlserver.jdbc.SQLServerDriver
    Library:
    As I Press Test Connection it gives following error:
    Test failed: Driver class not found.
    Verify the Driver location
    Pls suggest

    Download sqljdbc.jar and Add it to the Viewcontroller Libraries and Classpath (Project Properties of ViewController)

  • Dispatcher stopped and not able to connect with sql server

    Hi ,
                       In one of test system disp+work is started and then within no time its stopped.
    I am able to connect with  sql server 2005 database but while starting sap  dispatcher is stopping.
    Here is the log of  dev_wo
    trc file: "dev_w0", trc level: 1, release: "700"
    ACTIVE TRACE LEVEL           1
    ACTIVE TRACE COMPONENTS      all, MJ
    B 
    B Thu Jan 05 07:24:02 2012
    B  create_con (con_name=R/3)
    B  Loading DB library 'C:\usr\sap\DE1\SYS\exe\uc\NTI386\dbmssslib.dll' ...
    B  Library 'C:\usr\sap\DE1\SYS\exe\uc\NTI386\dbmssslib.dll' loaded
    B  Version of 'C:\usr\sap\DE1\SYS\exe\uc\NTI386\dbmssslib.dll' is "700.08", patchlevel (0.72)
    B  New connection 0 created
    M sysno      11
    M sid        DE1
    M systemid   560 (PC with Windows NT)
    M relno      7000
    M patchlevel 0
    M patchno    75
    M intno      20050900
    M make:      multithreaded, Unicode, optimized
    M pid        988
    M
    M  kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
    M  length of sys_adm_ext is 572 bytes
    M  ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 988) [dpxxdisp.c   1299]
    I  MtxInit: 30000 0 0
    M  DpSysAdmExtCreate: ABAP is active
    M  DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
    M  DpShMCreate: sizeof(wp_adm)          23936     (1408)
    M  DpShMCreate: sizeof(tm_adm)          3994272     (19872)
    M  DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    M  DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    M  DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
    M  DpShMCreate: sizeof(comm_adm)          528064     (1048)
    M  DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    M  DpShMCreate: sizeof(file_adm)          0     (72)
    M  DpShMCreate: sizeof(vmc_adm)          0     (1440)
    M  DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
    M  DpShMCreate: sizeof(gw_adm)     48
    M  DpShMCreate: SHM_DP_ADM_KEY          (addr: 07F90040, size: 4659000)
    M  DpShMCreate: allocated sys_adm at 07F90040
    M  DpShMCreate: allocated wp_adm at 07F91E40
    M  DpShMCreate: allocated tm_adm_list at 07F97BC0
    M  DpShMCreate: allocated tm_adm at 07F97BF0
    M  DpShMCreate: allocated wp_ca_adm at 08366E90
    M  DpShMCreate: allocated appc_ca_adm at 0836CC50
    M  DpShMCreate: allocated comm_adm at 0836EB90
    M  DpShMCreate: system runs without file table
    M  DpShMCreate: allocated vmc_adm_list at 083EFA50
    M  DpShMCreate: allocated gw_adm at 083EFA90
    M  DpShMCreate: system runs without vmc_adm
    M  DpShMCreate: allocated ca_info at 083EFAC0
    M  DpShMCreate: allocated wall_adm at 083EFAC8
    X  EmInit: MmSetImplementation( 2 ).
    X  MM global diagnostic options set: 0
    X  <ES> client 0 initializing ....
    X  Using implementation flat
    M  <EsNT> Memory Reset disabled as NT default
    X  ES initialized.
    M 
    M Thu Jan 05 07:24:03 2012
    M  ThInit: running on host sugarland
    M 
    M Thu Jan 05 07:24:04 2012
    M  calling db_connect ...
    C  Warning: Env(MSSQL_SERVER) [SUGARLAND\DE1] <> Prof(dbs/mss/server) [SUGARLAND]. Profile value will be used.
    C  Thread ID:708
    C  Thank You for using the SLOLEDB-interface
    C  Using dynamic link library 'C:\usr\sap\DE1\SYS\exe\uc\NTI386\dbmssslib.dll'
    C  dbmssslib.dll patch info
    C    patchlevel   0
    C    patchno      72
    C    patchcomment MSSQL: Thread check in DbSlDisconnect (969143)
    C  np:(local) connection used on SUGARLAND
    C  CopyLocalParameters: dbuser is 'de1'
    C  Using Provider SQLNCLI
    C  OpenOledbConnection: MARS property was set successfully.
    C 
    C Thu Jan 05 07:24:19 2012
    C  OpenOledbConnection: line 23391. hr: 0x8000ffff Login timeout expired
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Login timeout expired
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), Named Pipes Provider: Could not open a connection to SQL Server [2].
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Invalid connection string attribute
    C  Procname: [OpenOledbConnection - no proc]
    C  Using Provider SQLNCLI
    C  OpenOledbConnection: MARS property was set successfully.
    C 
    C Thu Jan 05 07:24:34 2012
    C  OpenOledbConnection: line 23391. hr: 0x8000ffff Login timeout expired
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Login timeout expired
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), Named Pipes Provider: Could not open a connection to SQL Server [2].
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Invalid connection string attribute
    C  Procname: [OpenOledbConnection - no proc]
    C  Using Provider SQLNCLI
    C  OpenOledbConnection: MARS property was set successfully.
    C 
    C Thu Jan 05 07:24:49 2012
    C  OpenOledbConnection: line 23391. hr: 0x8000ffff Login timeout expired
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Login timeout expired
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), Named Pipes Provider: Could not open a connection to SQL Server [2].
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Invalid connection string attribute
    C  Procname: [OpenOledbConnection - no proc]
    C  failed to establish conn to np:(local).
    C  Retrying without protocol specifier: (local)
    C  Using Provider SQLNCLI
    C  OpenOledbConnection: MARS property was set successfully.
    C 
    C Thu Jan 05 07:25:05 2012
    C  OpenOledbConnection: line 23391. hr: 0x8000ffff Login timeout expired
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Login timeout expired
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), Named Pipes Provider: Could not open a connection to SQL Server [2].
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Invalid connection string attribute
    C  Procname: [OpenOledbConnection - no proc]
    C  Using Provider SQLNCLI
    C  OpenOledbConnection: MARS property was set successfully.
    C 
    C Thu Jan 05 07:25:21 2012
    C  OpenOledbConnection: line 23391. hr: 0x8000ffff Login timeout expired
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Login timeout expired
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), Named Pipes Provider: Could not open a connection to SQL Server [2].
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Invalid connection string attribute
    C  Procname: [OpenOledbConnection - no proc]
    C  Using Provider SQLNCLI
    C  OpenOledbConnection: MARS property was set successfully.
    C 
    C Thu Jan 05 07:25:37 2012
    C  OpenOledbConnection: line 23391. hr: 0x8000ffff Login timeout expired
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Login timeout expired
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), Named Pipes Provider: Could not open a connection to SQL Server [2].
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Invalid connection string attribute
    C  Procname: [OpenOledbConnection - no proc]
    C  failed to establish conn. 0
    B  ***LOG BY2=> sql error 0      performing CON [dbsh#2 @ 1204] [dbsh    1204 ]
    B  ***LOG BY0=> <message text not available> [dbsh#2 @ 1204] [dbsh    1204 ]
    B  ***LOG BY2=> sql error 0      performing CON [dblink#3 @ 431] [dblink  0431 ]
    B  ***LOG BY0=> <message text not available> [dblink#3 @ 431] [dblink  0431 ]
    M  ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1411]
    M  in_ThErrHandle: 1
    M  *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10156]
    M 
    M  Info for wp 0
    M 
    M    stat = 4
    M    reqtype = 1
    M    act_reqtype = -1
    M    rq_info = 0
    M    tid = -1
    M    mode = 255
    M    len = -1
    M    rq_id = 65535
    M    rq_source = 255
    M    last_tid = 0
    M    last_mode = 0
    M    semaphore = 0
    M    act_cs_count = 0
    M    control_flag = 0
    M    int_checked_resource(RFC) = 0
    M    ext_checked_resource(RFC) = 0
    M    int_checked_resource(HTTP) = 0
    M    ext_checked_resource(HTTP) = 0
    M    report = >                                        <
    M    action = 0
    M    tab_name = >                              <
    M    vm = V-1
    M 
    M  *****************************************************************************
    M  *
    M  *  LOCATION    SAP-Server sugarland_DE1_11 on host sugarland (wp 0)
    M  *  ERROR       ThInit: db_connect
    M  *
    M  *  TIME        Thu Jan 05 07:25:37 2012
    M  *  RELEASE     700
    M  *  COMPONENT   Taskhandler
    M  *  VERSION     1
    M  *  RC          13
    M  *  MODULE      thxxhead.c
    M  *  LINE        10354
    M  *  COUNTER     1
    M  *
    M  *****************************************************************************
    M 
    M  PfStatDisconnect: disconnect statistics
    M  Entering TH_CALLHOOKS
    M  ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
    M  *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   720]
    M  *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c  260]
    M  Entering ThSetStatError
    M  ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
    M  Entering ThReadDetachMode
    M  call ThrShutDown (1)...
    M  ***LOG Q02=> wp_halt, WPStop (Workproc 0 988) [dpnttool.c   327]
    Please help me on this
    Thanks
    Srikanth

    Hi Amit, 
                 I restarted the system but dispatcher still in same stage.
    Here is the log for dev_w0
    ========================================
    Fri Jan 06 03:41:06 2012
    C  OpenOledbConnection: line 23391. hr: 0x8000ffff Login timeout expired
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Login timeout expired
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), Named Pipes Provider: Could not open a connection to SQL Server [2].
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Invalid connection string attribute
    C  Procname: [OpenOledbConnection - no proc]
    C  failed to establish conn. 0
    B  ***LOG BY2=> sql error 0      performing CON [dbsh#2 @ 1204] [dbsh    1204 ]
    B  ***LOG BY0=> <message text not available> [dbsh#2 @ 1204] [dbsh    1204 ]
    B  ***LOG BY2=> sql error 0      performing CON [dblink#3 @ 431] [dblink  0431 ]
    B  ***LOG BY0=> <message text not available> [dblink#3 @ 431] [dblink  0431 ]
    M  ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1411]
    M  in_ThErrHandle: 1
    M  *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10156]
    M 
    M  Info for wp 0
    M 
    M    stat = 4
    M    reqtype = 1
    M    act_reqtype = -1
    M    rq_info = 0
    M    tid = -1
    M    mode = 255
    M    len = -1
    M    rq_id = 65535
    M    rq_source = 255
    M    last_tid = 0
    M    last_mode = 0
    M    semaphore = 0
    M    act_cs_count = 0
    M    control_flag = 0
    M    int_checked_resource(RFC) = 0
    M    ext_checked_resource(RFC) = 0
    M    int_checked_resource(HTTP) = 0
    M    ext_checked_resource(HTTP) = 0
    M    report = >                                        <
    M    action = 0
    M    tab_name = >                              <
    M    vm = V-1
    M 
    M  *****************************************************************************
    M  *
    M  *  LOCATION    SAP-Server sugarland_DE1_11 on host sugarland (wp 0)
    M  *  ERROR       ThInit: db_connect
    M  *
    M  *  TIME        Fri Jan 06 03:41:06 2012
    M  *  RELEASE     700
    M  *  COMPONENT   Taskhandler
    M  *  VERSION     1
    M  *  RC          13
    M  *  MODULE      thxxhead.c
    M  *  LINE        10354
    M  *  COUNTER     1
    M  *
    M  *****************************************************************************
    M 
    M  PfStatDisconnect: disconnect statistics
    M  Entering TH_CALLHOOKS
    M  ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
    M  *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   720]
    M  *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c  260]
    M  Entering ThSetStatError
    M  ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
    M  Entering ThReadDetachMode
    M  call ThrShutDown (1)...
    M  ***LOG Q02=> wp_halt, WPStop (Workproc 0 3632) [dpnttool.c   327]

  • SQL Server Reporting services. failed to establish connection with project server. verify the url is correct.

    Dear All,
    I'm working on reporting of Project Server 2010, while configuring SQL SERVER REPORTING SERVICES faced issue after two complete days of troubleshooting along with this gone through plenty of forums, unable to figure out any solution. So finally posting on
    technet in order to find solution.
    ISSUE/PROBLEM:
    At initial configured the SQL REPORTING CONFIGURATION to sharepoint integrated database (SQL SERVER is installed on seperate machine), change the service to Domain Account and also installed sharepoint add in on server story was fine at this point. Furthur
    moving to SHAREPOINT ADMIN console and while configuring the Sharepoint Integrated Reporting continuously facing this error:
    Failed to establish connection with report server. . . . (Snapshot is attached for your further reference).
    My point of concern is that whenerver i try to open the REPORT SERVER URL on project server machine it prompts me to enter username and password but whenever i insert the domain credentails it didnt accept though it can be accesible by using the credentials
    of Local Admin of sql server machine. So i wana come to know whether its permission issue if yes then where i should mention the domain credentials.? 
    REGARDS DANISH DANIE

    Dear Paul,
    I am able to open the URL (http://psdb/ReportServer )using
    domian credential and page open with these contents
    Reporting Services Error
    The configuration parameter SharePointIntegrated is set to True but Share Point Object Model cannot be loaded
    Second,
    Configured the SPN on domain controller , performed the steps required to change the AUTHENTICATION in rsreportserver.config
    file also done the registry settings to disable the loop back settings.
    Same error still ! .... what should i do now ??? 
    REGARDS DANISH DANIE

  • Not able to connect with Sql Server Database

    Hi,
    I'm not able to connect with Sql Server database.during making connection I'm getting the following error:
    "Status : Failure -I/O Error: SSO Failed: Native SSPI library not loaded. Check the java.library.path system property."
    Please help
    Regards,
    Neeraj Goel

    Hi,
    I'm using Sql Server 2000.
    I downloaded the driver from the given site and still having the same problem. Do I need to copy the driver file in some specific folder.
    Regards,
    Neeraj Goel

  • Failed to Establish Connection with SQL Database Server (EAS)

    Hi,
    We have recently installed version 11.1.2.1 of essbase. Everything is working just peachy. One of my users tried to build a load rule using an Oracle ODBC data connection and gets the error:
    Failed to Establish Connection with SQL Database Server.  See log for more information.
    When I look in the log I see this:
    [Tue Feb 28 09:14:43 2012]Local/Sample/Basic/mressler@EnCanaAD/4240/Info(1013091)
    Received Command [SQLListDsn] from user [mressler@EnCanaAD]
    [Tue Feb 28 09:14:43 2012]Local/Sample/Basic/mressler@EnCanaAD/4240/Info(1021020)
    Cannot read SQL driver name for [Backup Exec Catalogs] from [ODBC.INI]
    [Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Info(1013091)
    Received Command [SQLRetrieve] from user [mressler@EnCanaAD]
    [Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Info(1021020)
    Cannot read SQL driver name for [Backup Exec Catalogs] from [ODBC.INI]
    [Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Info(1021004)
    Connection String is generated
    [Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Info(1021041)
    Connection String is [DSN=Test;UID=...;PWD=...;]
    [Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Info(1021006)
    SELECT Statement [SELECT '1' from dual] is generated
    [Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Info(1021013)
    ODBC Layer Error: [IM004] ==> [[Microsoft][ODBC Driver Manager] Driver's SQLAllocHandle on SQL_HANDLE_ENV failed]
    [Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Info(1021014)
    ODBC Layer Error: Native Error code [0]
    [Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Error(1021001)
    Failed to Establish Connection With SQL Database Server. See log for more information
    [Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Warning(1080014)
    Transaction [ 0x140002( 0x4f4cfd87.0x7b890 ) ] aborted due to status [1021001].
    I have tested that the ODBC connection can connect to the database. The sql query has been dumbed down to select '1' from dual. I have not included the word "select" in the query.
    Anyone seen this before? We are in the process of uninstalling the Oracle client completely and re-installing it to see if this solves the issue. We only installed the 64 bit version of the Oracle client. I am running on Windows Enterprise 2008 R2 - 64 bit. EAS, Essbase, EIS are all 64 bit installs. I believe Studio is the only one that is 32bit. However we are not currently using this product.
    Thanks,
    Mike

    Hi Mike,
    With Oracle Support's help, we got 3 of the 5 servers working now. We were using the Datadirect drivers but were configuring them wrong! You have to use the Standard Connection portion in the setup, specifying the Host, Port Number (1521) and the SID. We were using the TNSNames Connection which worked in the past, but apparently does not now.
    So I am down to 2 servers not working. They are both Windows 2008 R2 Enterprise 64 bit, running Oracle EPM Essbase 11.1.2.1. When I Open SQL in EAS it prompts for database (Essbase Server, App, DB) and when I hit ok it pops up with "Network error: Cannot Locate Connect Information For []". We did not do any of the suggestions in the document you linked to get the other 3 servers working. When you hit ok on that error, you then get another error stating, "There are no Data Sources defined. 'SQL data sources' option will be disabled". We do have datasources defined on the server.
    Any ideas?
    Thanks,
    Mike
    Edited by: Mike on Mar 1, 2012 8:38 AM

  • Error: 1021001 Failed to Establish Connection With SQL Database Server

    Hello,
    Someone you already MEETS it the following error during an essbase retrieve DLR.
    My client oracle essbase on my server is 64bit, Essbase 11.1.2.2 x64
    I run the odbc located in% windir% \ system32 \ odbcad32.exe
    "Error: 1021001 Failed to ESTABLISH Connection With SQL Database Server. See log for more information"
    Here is the log:
    Received Command [SQLListDsn] from user [admin]
    [2:50:33 p.m. Fri 28 September 2012] Local / CAS_TEST / / / 8168/Info (1042059)
    Connected from [10.100.50.2]
    [2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Info (1013091)
    Received Command [SQLRetrieve] from user [admin]
    [2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Info (1021004)
    Connection String is generated
    [2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Info (1021041)
    Connection String is [DSN = TEST_ORACLE; UID = ...; PWD = ...]
    [2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Info (1021006)
    SELECT Statement [SELECT from dual;] is generated
    [2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Info (1021013)
    ODBC Layer Error: [IM004] ==> [[Microsoft] [ODBC Driver Manager] Driver's SQLAllocHandle we failed SQL_HANDLE_ENV]
    [2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Info (1021014)
    ODBC Layer Error: Native Error code [0]
    [2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Error (1021001)
    Failed to ESTABLISH Connection With SQL Database Server. See log for more information
    [2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Warning (1080014)
    Transaction [0x780001 (0x50659d19.0xc9e78)] aborted due to status [1021001].
    When I try to go through OCI service name:
    dbServerName: port / service_name
    I have the following error message:
    Solutions2: List of members 1423.CAS_TEST.CAS_TEST September 28, 2012 2:50:15 PM CEST Succeeded
    Read SQL record September 28, 2012 2:50:35 PM CEST Failed
    thank you in advance
    Edited by: 851398 on 28 sept. 2012 06:31

    In essbase logs there is nothing special, same for windows log.
    Everything I like is log in log view eas
    [Fri Sep 28 17:52:11 2012]Local/CAS_TEST///4020/Info(1013205)
    Received Command [Get Database Info]
    [Fri Sep 28 17:52:11 2012]Local/CAS_TEST///4020/Info(1013205)
    Received Command [Get Database State]
    [Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7580/Info(1013210)
    User [admin] set active on database [CAS_TEST]
    [Fri Sep 28 17:52:21 2012]Local/CAS_TEST///6720/Info(1042059)
    Connected from [10.100.50.2]
    [Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/6720/Info(1013091)
    Received Command [GetAttributeNameSpecs] from user [admin]
    [Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7304/Info(1042059)
    Connected from [10.100.50.2]
    [Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7304/Info(1013091)
    Received Command [GetOtlInfo] from user [admin]
    [Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7572/Info(1042059)
    Connected from [10.100.50.2]
    [Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7572/Info(1013091)
    Received Command [OtlQueryMbrs] from user [admin]
    [Fri Sep 28 17:52:21 2012]Local/CAS_TEST///8116/Info(1042059)
    Connected from [10.100.50.2]
    [Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/8116/Info(1013091)
    Received Command [OtlQueryMbrs] from user [admin]
    [Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7384/Info(1013210)
    User [admin] set active on database [CAS_TEST]
    [Fri Sep 28 17:52:21 2012]Local/CAS_TEST///6592/Info(1042059)
    Connected from [10.100.50.2]
    [Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/6592/Info(1013091)
    Received Command [GetAttributeNameSpecs] from user [admin]
    [Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7972/Info(1042059)
    Connected from [10.100.50.2]
    [Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7972/Info(1013091)
    Received Command [GetOtlInfo] from user [admin]
    [Fri Sep 28 17:52:21 2012]Local/CAS_TEST///216/Info(1042059)
    Connected from [10.100.50.2]
    [Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/216/Info(1013091)
    Received Command [OtlQueryMbrs] from user [admin]
    [Fri Sep 28 17:52:21 2012]Local/CAS_TEST///3104/Info(1042059)
    Connected from [10.100.50.2]
    [Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/3104/Info(1013091)
    Received Command [GetAttributeNameSpecs] from user [admin]
    [Fri Sep 28 17:52:21 2012]Local/CAS_TEST///3472/Info(1042059)
    Connected from [10.100.50.2]
    [Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/3472/Info(1013091)
    Received Command [GetOtlInfo] from user [admin]
    [Fri Sep 28 17:52:21 2012]Local/CAS_TEST///8112/Info(1042059)
    Connected from [10.100.50.2]
    [Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/8112/Info(1013091)
    Received Command [OtlQueryMbrs] from user [admin]
    [Fri Sep 28 17:52:21 2012]Local/CAS_TEST///4020/Info(1013205)
    Received Command [Get Database Info]
    [Fri Sep 28 17:52:21 2012]Local/CAS_TEST///3840/Info(1042059)
    Connected from [10.100.50.2]
    [Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/3840/Info(1013091)
    Received Command [GetAttributeNameSpecs] from user [admin]
    [Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7760/Info(1042059)
    Connected from [10.100.50.2]
    [Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7760/Info(1013091)
    Received Command [GetOtlInfo] from user [admin]
    [Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7300/Info(1042059)
    Connected from [10.100.50.2]
    [Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7300/Info(1013091)
    Received Command [OtlQueryMbrs] from user [admin]
    [Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7904/Info(1042059)
    Connected from [10.100.50.2]
    [Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7904/Info(1013091)
    Received Command [OtlQuerySmartLists] from user [admin]
    [Fri Sep 28 17:52:21 2012]Local/CAS_TEST///3612/Info(1042059)
    Connected from [10.100.50.2]
    [Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/3612/Info(1013091)
    Received Command [GetAttributeNameSpecs] from user [admin]
    [Fri Sep 28 17:52:21 2012]Local/CAS_TEST///6732/Info(1042059)
    Connected from [10.100.50.2]
    [Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/6732/Info(1013091)
    Received Command [GetOtlInfo] from user [admin]
    [Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7576/Info(1042059)
    Connected from [10.100.50.2]
    [Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7576/Info(1013091)
    Received Command [OtlQueryMbrs] from user [admin]
    [Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7268/Info(1042059)
    Connected from [10.100.50.2]
    [Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7268/Info(1013091)
    Received Command [OtlQueryMbrs] from user [admin]
    [Fri Sep 28 17:52:27 2012]Local/CAS_TEST///7556/Info(1013210)
    User [admin] set active on database [CAS_TEST]
    [Fri Sep 28 17:52:29 2012]Local/CAS_TEST///8168/Info(1042059)
    Connected from [10.100.50.2]
    [Fri Sep 28 17:52:29 2012]Local/CAS_TEST/CAS_TEST/admin/8168/Info(1013091)
    Received Command [SQLListDsn] from user [admin]
    [Fri Sep 28 17:52:55 2012]Local/CAS_TEST///7564/Info(1042059)
    Connected from [10.100.50.2]
    [Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Info(1013091)
    Received Command [SQLRetrieve] from user [admin]
    [Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Info(1021004)
    Connection String is generated
    [Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Info(1021041)
    Connection String is [DSN=TEST_ORACLE;UID=...;PWD=...;]
    [Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Info(1021006)
    SELECT Statement [SELECT * from dual ] is generated
    [Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Info(1021013)
    ODBC Layer Error: [IM004] ==> [[Microsoft][ODBC Driver Manager] Driver's SQLAllocHandle on SQL_HANDLE_ENV failed]
    [Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Info(1021014)
    ODBC Layer Error: Native Error code [0]
    [Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Error(1021001)
    Failed to Establish Connection With SQL Database Server. See log for more information
    [Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Warning(1080014)
    Transaction [ 0xb50001( 0x5065c7d7.0x31ce0 ) ] aborted due to status [1021001].
    Have you an idea about the Merant driver to essbase?
    Thank

  • Essbase Studio - Failed to Establish Connection With SQL Database Server

    Hi all,
    I am new to Hyperion and am having trouble deploying what seems a simple cube in Essbase Studio.
    My environment is Windows 2003, EPM 11.1.1.2, SQL Server 2000.
    I have the following two issues which may be related.
    1. The EPM System Diagnostic tool says that Hyperion Foundation cannot connect to the SQL database.
    Error:
    Failed: Connection to database
    Error: java.net.UnknownHostException: <server name: <server name>
    Recommended Action:
    Every other EPM application is able to connect to the database. I have tried re-configuring Foundation Services and checking the config files and nothing looks wrong. I would appreciate advice on how to fix this.
    2 In Essbase Studio, I was able to connect to the database where the source data is, build the minischema and create dimensions and measures. But when I run the cube deployment wizard I get the error:
    Message: Failed to deploy Essbase cube
    Caused By: Failed to build Essbase cube dimension: (Time)
    Caused By: Cannot incremental build. Essbase Error(1021001): Failed to Establish Connection With SQL Database Server. See log for more information
    …ODBC Layer Error: [08001] ==> [[Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]SQL Server does not exist or access denied.]
    I have checked the DSN as well as the connections set up within Studio, and they are all able to connect to the database. I am using the admin user for the Essbase server and have created a different user for the databases where the data resides and the shared services database. I tried using the same user all the way through and this didn’t help.
    Can you please advise what else I can check or change to resolve this issue.
    Also, can you work in EAS with cubes that are created in Studio? I tried looking at it and I got an error that the rule file couldn’t be accessed because it was created in Studio.
    After the above failures, I tried creating a cube in EIS, with mixed success. I have been able to load the members and data without errors. But when I try to view the data in the cube, I am seeing field names for the measures instead of the data itself.
    ...Definitely more questions than answers at this stage of my learning.
    Regards
    Michelle

    Michelle,
    I don't know if you found an answer to you question after so many months but I was hoping I could be helpful.
    The issue you are experience happens often when the dimension that you are getting an error on, in this case TIME, is built from a snowflake lineage and there is a bad foreign key reference. This dimension is most like high-up in your outline build process for Essbase Studio and this prevents the build from happening usually early on.
    Check your logs also. They are in Hyperion > Products > logs > essbase > essbasestudio.
    You can also make your logs more verbose by setting a configuration variable in the essbase studio server.properties file but that should only be used for debugging as it really saps performance.
    And, yes, you can of course edit an Essbase Studio deployed cube in EAS. However, any changes you make to the cube in EAS are subject to being wiped-out upon the next Essbase Studio deployment of that Applicaion/Database combo.
    If you want to provide more detail, screenshots, etc. I would be glad to help where I can.
    Cheers,
    Christian
    http://www.artofbi.com

  • Jdeveloper connecting with SQL Server Express

    Hi i am trying to connect jdeveloper with SQL Server Express. At the moment i am getting a TCP/IP connection to the host error message.
    My connection string is as follows:
    Class.forName("com.micorosoft.sqlserver.jdbc.SQLServerDriver")
    Connection conn = DriverManager.getConnection("jdbc:sqlserver://mustang/sqlexpress; database = matt1; Uid = matt; Pwd = matt1")
    Can someone please help me!

    Enable TCP/IP protocol. Select Microsoft SQL Server 2005>Configuration Tools>SQL Server Configuration Manager. In the SQL Server Configuration Manager select the node SQL Server 2005 Network Configuration>Protocols for SQLEXPRESS. Right-click on the TCP/IP node and select Enable. Restart the SQL Server (SQLEXPRESS) service. In Adminstrative Tools>Services, right-click on the SQL Server (SQLEXPRESS) service and select Restart.
    To configure a JDBC connection with SQL Server 2005 Express, add SQL Server 2005 JDBC driver JAR file <Microsoft SQL Server 2005 JDBC Driver>/sqljdbc_1.0/enu/sqljdbc.jar to classpath. <Microsoft SQL Server 2005 JDBC Driver> is the directory in which SQL Server 2005 JDBC Driver zip file is installed.
    Driver class for SQL Server 2005 database is com.microsoft.sqlserver.jdbc.SQLServerDriver. Connection URL for the default SQL Server 2005 database is jdbc:sqlserver://localhost:<port>.
    In the connection URL, <port> is obtained from the SQL Server configuration Manager. When the SQL Server 2005 SQLEXPRESS is restarted the port number changes.
    To obtain the <port> in the SQL Server Configuration Manager, select the node SQL Server 2005 Network Configuration>Protocols for SQLEXPRESS. Right-click on TCP/IP node and select Properties. Select the IP Addresses tab. In IP ALL, the TCP Dynamic Ports specifies the <port> value. The connection URL format for another database name is shown in following listing.

  • Entity bean connection with SQL Server Error! urgent

    Hi,
    I am working with J2EE tutorial and when i tried SavingsAccount Entity bean to connect with SQL Server 2000(other than default Cloudscape)and I'm also having SQL Server 2K JDBC Driver installed. I also made entries in Server Configuration menu of J2EE deployment tool for this MS JDBC Driver for SQL Server 2K,I will enclose my dbName and connection method in the entity bean , but i am getting error like this.
    my data base name in SQL Server 2K is 'rajeshrNew'.
    private String dbName="java:comp/env/jdbc/rajeshrNew"; //dbName
    private void makeConnection() throws NamingException, SQLException {
    InitialContext ic = new InitialContext();
    DataSource ds = (DataSource) ic.lookup(dbName);
    con = ds.getConnection();
    and errors receiving are:
    java.rmi.ServerException: RemoteException occurred in server thread; nested exception is:
    java.rmi.RemoteException: nested exception is: javax.ejb.EJBException: Unable to connect to database. No suitable driver; nested exception is:
    javax.ejb.EJBException: Unable to connect to database. No suitable driver
    java.rmi.RemoteException: nested exception is: javax.ejb.EJBException: Unable to connect to database. No suitable driver; nested exception is:
    javax.ejb.EJBException: Unable to connect to database. No suitable driver
    javax.ejb.EJBException: Unable to connect to database. No suitable driver <<no stack trace available>>
    Please help me to resolve this problem!!
    Regards
    Rajesh R

    yes i do create System DSN with rajeshrNew and my default.properties file look like this..
    # maximum size of message driven bean instance
    # pool per mdb type
    messagebean.pool.size=3
    # maximum size of a "bulk" message bean delivery
    messagebean.max.serversessionmsgs=1
    # message-bean container resource cleanup interval
    messagebean.cleanup.interval=600
    passivation.threshold.memory=128000000
    idle.resource.threshold=600
    log.directory=logs
    log.output.file=output.log
    log.error.file=error.log
    log.event.file=event.log
    distributed.transaction.recovery=false
    transaction.timeout=0
    transaction.nonXA.optimization=true
    sessionbean.timeout=0
    # validating parser values
    # validating.perser is used when archive file are loaded by
    # any of the J2EE Reference Implementation tools.
    # deployment.validating.parser is used when deploying an
    # archive on the J2EE AppServer.
    validating.parser=false
    deployment.validating.parser=true
    now u tell me what i have to change..
    with regards
    Rajesh

  • Failed to Establish connection with SQL Server

    hi I have configured odbc settings and when i connect the sql from essbase i got the error :Failed to Establish connection with SQL Server .please hepl me on this
    and please give me step by step process for how to resolve thi issue.and give me detail step by step from starting onwards.
    appreciate your Help,
    Thank u
    Subbu.

    Steps:
    1. Test database connection from Essbase server through SQL Command. This gives you whether you are able to connect to Database from Essbase server.
    2. Create ODBC Connection: System DSN>Add>Select correct driver (Oracle in ...) >give Datasource (any name), Description (Any), TNS Service Name (user SID name), User name (Database user name)
    3. Test Connection. if successful, you can use this ODBC to get the data.
    4. Open rules file, go to FILE>Open SQL
    5. Provide Essbase server, Application, Database names
    6. Select SQL Data Source from the list (ODBC defined in step2)
    7. Enter tested SQL Query(which is tested at SQL command or "sysdate from dual" ) in select box. NOTE: Remove select word from query. You can ignore from and where clauses, all you can include in select block.
    8.Click OK/Reteive data
    Rao

Maybe you are looking for