SQL: Infoset query

Hi,
I create on infoset query in SQL trace using LDB.
Now my problem is, I want to the link text in corresponding value field how to link it. that screen is customized screen

Look also at <a href="https://service.sap.com/sap/support/notes/491403">Note 491403 - Identifying text in SAP Query</a> or <a href="http://help.sap.com/saphelp_46c/helpdata/en/d9/9958e0c50a11d396f80000e82de14a/frameset.htm">Application-specific Enhancements</a>
Regards

Similar Messages

Modifying SQL in an infoset query

Dear SDN experts,
Can you please tell me if there is a way to modify the sql statement for an InfoSet query that was generated from a quickviewer?
Preferably this should be done without copying the generated code and then directly editing the ABAP, because I am just a poor application consultant without those kinds of programming priviliges.
Thank you very much in advance.
/Ulrik

Thank you Sameer (and also thank you to Alvaro).
As an example of a specific requirement I need to show only the most recent purchase order created for specific vendor(s), and I figure I could accomplish this by tweaking the SQL statement. Or maybe I could load the resultset into an internal table an manipulate this.
I have a feeling I need to go to coding section under extras on the InfoSet. But I think I just need a couple of nudges to get to that moment of revelation

Runtime error while executing infoset query

Dear Experts,
When we execute infoset query we get following dump :"
" An SQL error occurred when accessing a table."
Database error text........: "ORA-25153: Temporary Tablespace is Empty"
Internal call code.........: "[RSQL/FTCH/EBAN ]"
Please check the entries in the system log (Transaction SM21).
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"DBIF_RSQL_SQL_ERROR" CX_SY_OPEN_SQL_DBC
"/1BCDWB/SAPLIQG000000000015" or "/1BCDWB/LIQG000000000015U02"
"/1BCDWB/IQG000000000015EXTR"
can any one hve idea about the above error.
With Best Regards,
Jaspal

Hi Jaspal
Looks like a BASIS issue.
Check with BASIS, they need to regularly monitor the tablespace and file system, at OS level
Regards
Madhan D

Oracle SQL Select query takes long time than expected.

Hi,
I am facing a problem in SQL select query statement. There is a long time taken in select query from the Database.
The query is as follows.
select /*+rule */ f1.id,f1.fdn,p1.attr_name,p1.attr_value from fdnmappingtable f1,parametertable p1 where p1.id = f1.id and ((f1.object_type ='ne_sub_type.780' )) and ( (f1.id in(select id from fdnmappingtable where fdn like '0=#1#/14=#S0058-3#/17=#S0058-3#/18=#1#/780=#5#%')))order by f1.id asc
This query is taking more than 4 seconds to get the results in a system where the DB is running for more than 1 month.
The same query is taking very few milliseconds (50-100ms) in a system where the DB is freshly installed and the data in the tables are same in both the systems.
Kindly advice what is going wrong??
Regards,
Purushotham

SQL> @/alcatel/omc1/data/query.sql
2 ;
9 rows selected.
Execution Plan
Plan hash value: 3745571015
| Id | Operation | Name |
| 0 | SELECT STATEMENT | |
| 1 | SORT ORDER BY | |
| 2 | NESTED LOOPS | |
| 3 | NESTED LOOPS | |
| 4 | TABLE ACCESS FULL | PARAMETERTABLE |
|* 5 | TABLE ACCESS BY INDEX ROWID| FDNMAPPINGTABLE |
|* 6 | INDEX UNIQUE SCAN | PRIMARY_KY_FDNMAPPINGTABLE |
|* 7 | TABLE ACCESS BY INDEX ROWID | FDNMAPPINGTABLE |
|* 8 | INDEX UNIQUE SCAN | PRIMARY_KY_FDNMAPPINGTABLE |
Predicate Information (identified by operation id):
5 - filter("F1"."OBJECT_TYPE"='ne_sub_type.780')
6 - access("P1"."ID"="F1"."ID")
7 - filter("FDN" LIKE '0=#1#/14=#S0058-3#/17=#S0058-3#/18=#1#/780=#5#
8 - access("F1"."ID"="ID")
Note
- rule based optimizer used (consider using cbo)
Statistics
0 recursive calls
0 db block gets
0 consistent gets
0 physical reads
0 redo size
0 bytes sent via SQL*Net to client
0 bytes received via SQL*Net from client
0 SQL*Net roundtrips to/from client
0 sorts (memory)
0 sorts (disk)
9 rows processed
SQL>

Infoset query BI 7.0

Hi All BW gurus ,
i want a clear picture how to create an infoset query and when to go for infoset and infoset query in GENERIC Extaction . anyone pls send the screen shots how to create and extract data to bw side from infoset query ,
my email is [email protected],
100% points will be assined to the gurus
regards
Sherwin

<b>Look at</b>
http://help.sap.com/saphelp_erp2004/helpdata/en/92/43ec39d0383f09e10000000a11402f/frameset.htm
Re: Infoset
https://www.sdn.sap.com:443/irj/sdn/thread?threadid=199410&messageid=2217326
https://www.sdn.sap.com:443/irj/sdn/thread?threadid=189150&messageid=2113030

Infoset query of vendor payments at the cost distribution level

We would like an infoset query of vendor payments at the cost distribution level of the document. The issue seems to be joining vendor to the document cost distribution lines.
1.) BSAK + BSIK can be combined with an infoset data structure but only contain the vendor line of a document; the cost distribution lines are not in the tables.
2.) BSIS + BSAS can be combined with an infoset data structure but lack vendor data and joins (to a vendor source) are not an option with data structures. Vendor data added with an additional field is too slow to be a primary selection field.
3.) Logical data base KDF in an infoset returns only the vendor line of a document, not the cost distribution lines.
4.) Logical data base BRM in an infoset can have vendor from BSAK/BSIK attached by an additional field but performance is too slow to be useful. Joins are not an option in a logical data base infoset.
5.) Complete data is lacking when table joins between document cost distribution tables and vendor data tables are possible, (SPL actual line item table & BSIP or FMIFIIT & FMIFIHD). BSIP lacks AB documents (reversals). FM tables lack general ledger only documents.
6.) BSAK and BSIK together have complete vendor data but joins of both to a basis table do not work well. Left outer joins are too slow, inner joins won’t work since the tables have mutually exclusive data.
It would be ideal to have vendor in BKPF, like FMIFIHD has, but it isn't a field.
Does anyone know of any other options? I have seen the helpful thread on How to Read BSEG Efficiently

Hi,
This is SAP Business one reporting and printing forum. Please find correct forum and repost above discussion to get quick response.
Please close this thread here with helpful answer.
Thanks & Regards,
Nagarajan

Infoset query of vendor payments at the cost distribution level of the document

We would like an infoset query of vendor payments at the cost distribution level of the document. The issue seems to be joining vendor to the document cost distribution lines.
1.) BSAK + BSIK can be combined with an infoset data structure but only contain the vendor line of a document; the cost distribution lines are not in the tables.
2.) BSIS + BSAS can be combined with an infoset data structure but lack vendor data and joins (to a vendor source) are not an option with data structures. Vendor data added with an additional field is too slow to be a primary selection field.
3.) Logical data base KDF in an infoset returns only the vendor line of a document, not the cost distribution lines.
4.) Logical data base BRM in an infoset can have vendor from BSAK/BSIK attached by an additional field but performance is too slow to be useful. Joins are not an option in a logical data base infoset.
5.) Complete data is lacking when table joins between document cost distribution tables and vendor data tables are possible, (SPL actual line item table & BSIP or FMIFIHD & FMIFIIT). BSIP lacks AB documents (reversals). FM tables lack general ledger only documents.
6.) BSAK and BSIK together have complete vendor data but joins of both to a basis table are not an option. Left outer joins are too slow, inner joins won’t work since the tables have mutually exclusive data.
Does anyone know of any other options?

Hi,
This is SAP Business one reporting and printing forum. Please find correct forum and repost above discussion to get quick response.
Please close this thread here with helpful answer.
Thanks & Regards,
Nagarajan

Crystal report from SAP infoset query

Hi All,
I am facing a problem in a crystal report which is based on Infoset query. When I run the report after passing the parameters it gives me an error "Database error occured" "Parameter field value does not exists" "RFC Closed"
But if I run the same Infoset query from SQ01 I am able to run it with same paramenter and it returns many records.
To be very precise I am running the best practice crystal report "Cost Analysis - Planned vs. Actual Order Costs" which is based on infoset query CO_OM_CA_20_Q1.
It throws me error that "Controlling Area does not exists".
Did anyone faced similar problem?
Best Regards,
Chetan

Hi,
log into your SAP ERP system using the SAP GUI and choose in the SAP Menu the following path:
SAP Menu -> Accounting -> Controlling -> Cost Cetner Controlling ->Environment->Set Controlling Area.
Set the desired controlling area for your user there (DO NOT FORGET TO CLICK ON THE DISKETTE ICON) and try again.
Regards,
Stratos

I am facing a problem in a crystal report which is based on Infoset query

Hi All,
I am facing a problem in a crystal report which is based on Infoset query.in the Cost Analysis - Planned vs. Actual Order Costs
There are two querys like Query: CO_OM_CA_20_Q1 and InfoSet: ZBPBI131_INFO_ODVR. I build infoset query based on sap best practice user guide but problem is not able to find CO_OM_CA_20_Q1
Best Regards,
Srinivas

Hi,
I would first of all suggest you don't open the same question twice. this looks like a duplicate to this entry:
Best Practices v3.31 - SAP InfoSet Query connection
Did you assign the queries and the infosets to an InfoSet user group and you assign the SAP account to it as well ?
Ingo

I am facing a problem in a crystal report which is based on Infoset query.i

Hi All,
I am facing a problem in a crystal report which is based on Infoset query.in the Cost Analysis - Planned vs. Actual Order Costs
There are two querys like Query: CO_OM_CA_20_Q1 and InfoSet: ZBPBI131_INFO_ODVR. I build infoset query based on sap best practice user guide but problem is not able to find CO_OM_CA_20_Q1

Please re-post if this is still an issue to the Business Objects Integration Kits - SAP Forum or purchase a case and have a dedicated support engineer work with you directly

How to delete Infoset Query in R/3

Hi Gurus,
I created a Infoset using SQ02 in R/3 and generated the query. Now I need to delete that Infoset query. Please advice me how to delete infoset query from the functional group in R/3.
Thanks
Liza

Hi,
In SQ01 ,press shift+F7 then find your user group. then from infoset query tab ,select ur infoset.
and try to delete , I think, it should work.
Regards
CSM Reddy

Sql select query problem

hi friends,
i've a view called "risk_efforts" with fields user_id,user_name,wknd_dt,week_day,prod_efforts,unprod_efforts.
Name Type
ROW_ID NUMBER
USER_ID VARCHAR2(14)
USER_NAME VARCHAR2(50)
WKND_DT VARCHAR2(8)
WEEK_DAY VARCHAR2(250)
PROD_EFFORTS NUMBER
UNPROD_EFFORTS NUMBER
data is like this:
when there is some data in prod_efforts, unprod_efforts will be null
when there is some data in unprod_efforts, prod_efforts will be null
for example:
USER_ID     USER_NAME     WKND_DT     WEEK_DAY     PROD_EFFORTS     UNPROD_EFFORTS
G666999     GTest     20100403     TUE     null 3
G666999     GTest     20100403     TUE     14     null
now i want to combine these 2 rows into 1 row i.e o/p should be like this
USER_ID     USER_NAME     WKND_DT     WEEK_DAY     PROD_EFFORTS     UNPROD_EFFORTS
G666999     GTest     20100403     TUE     14 3
i've tried all combinations but couldn't get the query. Please help me with the exact SQL select query.
thanks,
Girish

Welcome to the forum.
First read this:
Urgency in online postings
Secondly, it's always helpful to provide the following:
1. Oracle version (SELECT * FROM V$VERSION)
2. Sample data in the form of CREATE / INSERT statements.
3. Expected output
4. Explanation of expected output (A.K.A. "business logic")
5. Use \ tags for #2 and #3. See FAQ (Link on top right side) for details.
You have provided #3 and #4. However with no usable form of sample data forum members will often not respond as quickly as they could if you provided #2.
I'm just wagering a guess here but what about this:SELECT ROW_ID
, USER_ID
, WKND_DT
, WEEK_DAY
, MAX(PROD_EFFORTS) AS PROD_EFFORTS
, MAX(UNPROD_EFFORTS) AS UNPROD_EFFORTS
FROM RISK_EFFORTS
GROUP BY ROW_ID
, USER_ID
, WKND_DT
, WEEK_DAY

Issue while extracting data using Gen DS of Type Infoset Query

Hi All,
We have a Generic Data source created using the Infoset query. I get some data discrepency when i am extracting the data with the same DS. The data for the Field Amount in the R3 and the PSA is different. When i try to check the same using the RSA3 T-Code i am unable to execute the Gen DS in R3 production where as its working fine in R3 Dev, and i am able to execute the other DS in the R3 production using the RSA3 T-code.
My concerns ::--
1. if the DS is working fine in R3 Dev in RSA3 the y i am facing the problem in Production.
2. Y i am getting the different data in R3 and PSA since PSA shuld be the replicate of R3?
3. How can i resolve this problem.??
Thanks in Advance
Regards

Thanks venkat,
I am having the authorization to execute the query in R3 production, As i am able to execute the other DS in RSA3 . But not able to execute this DS i had also checked it is active n working fine when loading the Data.
There is only one routine ie to transfer rule from lower to upper of a char value.
As der r routines in Update Rule but i have to get the same data in PSA which is der in R3.
The Routine of Update Rules will be executed when loading the data to the Targets right so the data may b vary in Data targets but y i am getting different data in PSA .
Pls thru some light.
Regards

InfoSet Query: Syntax Error while generating the program.

Dear All,
I have a Query in CRM system which contains an Infoset based on LDB.
The InfoSet Query throws up a Syntax error while generating the program.
So, we are not able to change the Infoset using the Infoset Query through SQ01.
The error is as follows:-
Syntax error in program "AQZZ==/SAPQUERY/CRM_ACTMON1 ".
Error in the ABAP Application Program
The current ABAP program "CL_QUERY_OUTPUT_DEFINITION====CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "AQZZ==/SAPQUERY/CRM_ACTMON1 "
in include "AQZZ==/SAPQUERY/CRM_ACTMON1 " in
line 28:
""CRMT_REPORT_LOCATORLIST" must be a flat structure. You cannot use int"
"ernal tables, strings, references, or structures as components. -"
Please help me arrive at an solution, so that we are able to change the Infoset through the InfoSet Query.
Awaiting your reply as soon as possible.
Thanks and Regards,
Pankaj.

There is an error in your query, specifically in the definition of CRMT_REPORT_LOCATORLIST. In the short dump (transaction ST22) you will see more details and the exact location of an error if you just scroll down.
I can't tell more because this problem is specific to your system, to which I have no access. Read the whole dump and look at all the objects mentioned there.

Infoset query logical database and transparent table

Hi!
We have an infoset with the data source logical database=PNP.
We get some fields from the infotype 0768, P0768-PERNR, P0768-BEGDA, etc.
Now we need add another table to make a join within infotype 0768 and table T5F99SE.
For instance, in infotype 0768 I have one record with the fields PERNR and BEGDA and in the T5F99SE I have 3 records related to the unique record of infotype 0768, the fields of the table are PERNR, BEGDA, ACTDT and ADDAT .
The fields values in the example can be:
Infotype 0768: PERNR=00101800, BEGDA=20110401, DICOT=20, BACHE=1200
Table T5F99SE: record 1 PERNR=00101800, BEGDA=20110401, ACTDT=20110401, ADDAT=PB    E
                         record 2 PERNR=00101800, BEGDA=20110101, ACTDT=20110405, ADDAT=PC    E01
                         record 3 PERNR=00101800, BEGDA=20110401, ACTDT=20110409, ADDAT=PA    E
The result we want get with infoset query is
PERNR    BEGDA   DICOT BACHE   ADDAT
00101800 20110101 20        1200       PB    E
00101800 20110101 20        1200       PC    E01
00101800 20110101 20        1200       PA    E
I would like to get the fields of the infotype and some fields of the table T5F99SE.
Is possible do this action with ABAP modifying an infoset that already exists adding the fields of the transparent table?
What should I do?
Kind regards,
Julian.

My guess is that it would not be possible to include a transparent table into the LDBs PNP and PNPCE. Would need input from a technical expert there.
However, instead of using the LDB, why don't you explore just using a direct table join? You may need to join PA0000, PA0001, PA0002 along with PA0768 and your other tables. An infoset can then be created on this table join.
To go to the mode where you can create the table join, in your infoset transactions, choose 'Table join' instead of 'LDB'.

SQL: Infoset query

Similar Messages

Maybe you are looking for