SQL*LOADER how to load blanks when data is null

I need to load data which contains null values into a table which cannot contains nulls. How can I tell SQL*LOADER to load blanks in a column when the input data is nulls?

I think something like this in your control file should work:
col1 char(10) nvl(col1,' ')

Similar Messages

My game center won't load and shows up blank when I try to open it. I've already tried to close all the apps and restart it and it still won't work. Is their anyway to fix it without restoring it??

My game center won't load and shows up blank when I try to open it. I've already closed all of my apps and restarted it and it still won't work. Is their anyway to fix it without restoring it and starting over??

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- sign out and the sign back into Game Center
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.

How to find out when data was deleted from table in oracle and Who deleted that

HI Experts,
Help me for below query:
how to find out when data was deleted from table in oracle and Who deleted that ?
I did that to fidn out some data from dba_tab_modifications, but I m not sure that what timestamp shows, wether it shows for update,insert or delete time ?
SQL> select TABLE_OWNER,TABLE_NAME,INSERTS,UPDATES,DELETES,TIMESTAMP,DROP_SEGMENTS,TRUNCATED from dba_tab_modifications where TABLE_NAME='F9001';
TABLE_OWNER                    TABLE_NAME                        INSERTS    UPDATES    DELETES     TIMESTAMP         DROP_SEGMENTS TRU
PRODCTL                        F9001                                                     1683         46       2171            11-12-13 18:23:39             0                   NO
Audit is enable in my enviroment?
customer is facing the issue and data missing in the table and I told him that yes there is a delete at 11-12-13 18:23:39 in table after seeing the DELETS column and timestamp in dba_tab_modifications, but not sure I am right or not
SQL> show parameter audit
NAME                                 TYPE        VALUE
audit_file_dest                      string      /oracle/admin/pbowe/adump
audit_sys_operations                 boolean     TRUE
audit_syslog_level                   string
audit_trail                          string      DB, EXTENDED
please help
Thanks
Sam

LOGMiner --> Using LogMiner to Analyze Redo Log Files
AUDIT --> Configuring and Administering Auditing

SQL*Loader: How to load multi-line report data?

Hi,
is it possible to use SQL*Loader to load data from a hierarchical structured fixed column ASCII file like this
001 scott
New York 01.01.2002 1234
Chicago 15.10.2001 9876
002 smith
Los Angeles 24.12.1999 5678
Washington 01.12.1999 0000
Chicago 01.01.2000 1111
into one database table:
id name city day code
001 scott New York 01.01.2002 1234
001 scott Chicago 15.10.2001 9876
002 smith Los Angeles 24.12.1999 5678
002 smith Washington 01.12.1999 0000
002 smith Chicago 01.01.2000 1111
The number of lines per name is unlimited, the next line starts after a separating ---- line.
We cannot change the format of the text file to import.
There is an example in the documentation that shows how to load a structure like the following via insert triggers:
001 scott New York 01.01.2002 1234
Chicago 15.10.2001 9876
002 smith Los Angeles 24.12.1999 5678
Washington 01.12.1999 0000
Chicago 01.01.2000 1111
But we have the name information on a separate header line, so I don't know if we can use a similar technique here.
regards
Sven

Try enclosing your strings with e.g. a double-quote. To do so, the control file needs the following (example):
LOAD DATA
REPLACE
INTO TABLE test
FIELDS TERMINATED BY '|' OPTIONALLY ENCLOSED BY '"'
TRAILING NULLCOLS
id1,
id2,
id3,
id4,
)of course this does mean that your data must change...
L.

SQL*Loader - How to load only a few columns from a .csv file to ora table

Hi there,
Could anyone please let me know how to load few columns from a .csv
file into a oracle table using SQL*Loader.
I know how to create a .dat and .ctl file and run the sql loader.
Suppose I have a .csv file with
col1, col2, col3, col4
and I only need to load col1 and col3 into col_a and col_b respectively
in table_a?
structure of table_ a
col_a,
col_b
Please advice

Try like..it i will work..
LOAD DATA
INFILE 'test.txt'
LOAD DATA
TRUNCATE INTO TABLE T1
FIELDS TERMINATED BY ','
(col1,
col2 FILLER,
col3,
col4 FILLER
)

How to check whether a date is null or not in java ?

Plz do help me.

I was trying like this
Date sdate = null;
if(sdate.equals(null))
So i got null pointer Exception.. Now i found out to b checked like this if(sdate == null)
tx.
And my another question is there any way to get yesterday date from today's date which is given as input. I mean is there any short method ?

SQL LOADER: how to load CLOB column using stored function

Hi,
I am a newbie of sql loader. Everything seems to be fine until I hit a
road block - the CLOB column type. I want to load data into the clob
column using a stored function. I need to do some manipulation on the
data before it gets saved to that column. But I got this error when I
run the sql loader.
SQL*Loader-309: No SQL string allowed as part of "DATA" field
specification
DATA is my CLOB type column.
here is the content of the control file:
LOAD DATA
INFILE 'test.csv'
BADFILE 'test.bad'
DISCARDFILE 'test.dsc'
REPLACE
INTO TABLE test_table
FIELDS TERMINATED BY ','
OPTIONALLY ENCLOSED BY '"'
TRAILING NULLCOLS
codeid          BOUNDFILLER,
reason          BOUNDFILLER,
Checkstamp     "to_date(:CHECKSTAMP, 'mm/dd/yyyy')",
"DATA"          "GetContent(:codeid, :reason)"
All references are suggesting to use a file to load data on
CLOB column but I want to use a function in which it generates
the content to be saved into the column.
Any help is greatly appreciated.
Thanks,
Baldwin
MISICompany

*** Duplicate Post ... Please Ignore ***

SQL Loader: How to load binary files

Hi All,
I need to load a binary file into the database (BLOB) using SQL Loader. What I have are only two files. The first file is an attributes file that contains the file names, the file sizes, the file descriptions, etc. The second file is a binary file that contains ALL the files described in the attributes file. They are concatenated in the same order that the attributes file names them.
This data load is different from any other that I've encountered before because I am familiar with loads that have separate files.
I'm sorry if this is not the right board to post this question, but I'd greatly appreciate any help.
Regards,
mike six

Check out following link. It might be of help.
http://www.oracle-base.com/forums/viewtopic.php?p=7680

Recently I cant load my websites just blank when i type the website address only applies to Macair OS my windows machine works ok

Recently i find my Macair OS does not load my websites just shows blank pages and takes ages never loading i have checked with Domain names its ok I have checked with Hosting company all ok
I am confused why suddenly only 2 sites are blank the 3rd works fine
However in my windows machine its all ok
Just this Macair os last few days
I wonder if any solutions in sight please

Recently i find my Macair OS does not load my websites just shows blank pages and takes ages never loading i have checked with Domain names its ok I have checked with Hosting company all ok
I am confused why suddenly only 2 sites are blank the 3rd works fine
However in my windows machine its all ok
Just this Macair os last few days
I wonder if any solutions in sight please

How to UNLOCK queues when data is migrated from legacy system to SAP syste

Hi All,
I need some help regarding queues (SMQ2). XI is been used to migrate data from legacy system to SAP system. Sometimes the queue is getting locked. Once the queue is unlocked then the message is processed correctly. So, the incoming queues must be "unlocked" routinely so that they can process through the system. There is a standard report RSQIWKEX available that can be scheduled in SAP system to automatically unlock the queues. Before using the standard report RSDIWKEX, we made sure that we have added parameter MONITOR QRFC_RESTART_ALLOWED set to "1" in Integration Engine specific configuration (TCODE SXMB_ADM).We are unable to analyze the reason for locking of queues and how to avoid it. If the locking of the queues can not be avoided, is there any way to unlock the queues? We tried executing this report but were not successful in unlocking the queues. Please guide us in solving this issue. It would be really helpful if you can give us a direction in solving this problem.
Thanks in Advance,
Shwetha.

Hi,
Just check if the Queues are registered in Transaction SMQR.
If its not, then register the Queue by pressing 'Register' Button
Sharif.

How to update row when data contains single quote ?

Hi,
Please see this query:
update query_tab set title='It's common knowledg' where
id='1121';I have this update query coming from .NET, but abviously this is error since single quote in the text (title column) given by user gives wrong meaning to sql parser. So, how to solve this problem ?
Edited by: bootstrap on Dec 25, 2010 9:53 AM

Hi,
To include a single-quote in a string literal, use two of them in a row:
update      query_tab
set      title     = 'It''s common knowledge'
where      id     = '1121';The method above works in any version of Oracle.
Starting in Oracle 10, you can also use Q-notation, like this:
update      query_tab
set      title     = Q'[It's common knowledge]'
where      id     = '1121';For details, look up "Text Literals" in the SQL Language manual:
http://download.oracle.com/docs/cd/B28359_01/server.111/b28286/sql_elements003.htm#sthref337

In SQL server, how can I pass a date and return on any specific day of the week (e.g. Sunday/Monday/Wednesday, etc.)

In SQL server, I want to be able to have a function to return the date of any specific day of the week by passing two parameters. E.g.:
parameter 1: a selected date (e.g. 8/3/2013)
parameter 2: any specific day of the week (e.g. Wednesday)
result: should be 7/31/2013 (8/3/2013 is a Sunday in the week 7/28 - 8/3, so the Wednesday should be 7/31/2013)
then if I want to get Saturday of that week, I can simply change the second parameter to 'Saturday'
Thanks.

Wrong forum:
http://www.microsoft.com

How to make TreeByNestingTableColumn when data is coming by RFC

Hi ,
I have a requirement in my project that i need to populate the TreeByNestingTable from the data that is coming from backend( importing Adaptive RFCs).
Also, on selection of a row having a node , i need to open some view & on selection of row having leaf, i need to open some other view.
Can anyone guide me, so as how to do this...?
thanks,
ankur

Hi valery,
Thanks a lot for your instant reply on SDN.
But i didn't get what you explained me as I am new to WebDynpro Java
If you could explain me this in step by step process & coding involved.
i have created a new value node in component controller to bind it with table & initially having RFCNAME_Input in component controller.I have added attributes required for treetable to this new value node & also placed a recursive node in it.
Then, i have placed elements of RFCNAME_Input->Output->Lt_org_unit node to an arraylist.
After this i am not able to proceed.
I would be very greatful to you if you can spare some time & help me.
Thanks & Regards,
Ankur
<b>
code i wrote for populating arraylist.:</b>
IWDNode tnode = wdContext.nodeTest_Org_Unit_Input().nodeOutput().nodeLt_Org_Unit();
int size = tnode.size();
final Collection modelObjects = new ArrayList(size);
for(int i = 0;i<size;i++)
final IWDNodeElement tele = tnode.getElementAt(i);
final Object model = tele.model();
modelObjects.add(model);

Some how I a blank when I open a new tab, I want to see google page like it was!

When I open a new tab it's blank and it use to my last page visits. but now it's just a blank page I want to open a new page and see last places I viewed
== This happened ==
Every time Firefox opened
== a couple days ago

See: http://www.google.com/support/toolbar/bin/answer.py?answer=115561

Best event when data changes via a user in a datagrid

How do I capture when data changes via a user in a datagrid?
change event?

thanks mate but I'm not sure where to put it:
<mx:AdvancedDataGridColumn headerText="sell" dataField="sell" textAlign="right" editable="true">
                <mx:itemEditor>
                    <fx:Component>
                    <s:MXAdvancedDataGridItemRenderer>
                        <s:TextInput width="100%" text="{data.sell}" fontWeight="bold" contentBackgroundColor="#eeeeff" color="#3333ff" textAlign="right" restrict=".0-9" maxChars="11">
                        </s:TextInput>
                    </s:MXAdvancedDataGridItemRenderer>
                    </fx:Component>
                </mx:itemEditor>
            </mx:AdvancedDataGridColumn>

SQL*LOADER how to load blanks when data is null

Similar Messages

Maybe you are looking for