SQL Query in Cache

Hi
I have one SQL Query which I need to be remain in CACHE everytime.
Is there is any way to achieve this?
Regards
Kapil

KapilK wrote:
I know that .. but still I want that query to remain in cache all the time even though it isnt the most frequently executed query on a particular day (or for a particular period)it doesn't make sense what you say,...

Similar Messages

Pinning the sql query in cache

Hi All,
I want to pin the sql query is cache because the physical reads are very high. Can anyone tell me steps to pin the sql query in the cache. Current version 10.2.1.0 OS : Windows.
Reads CPU Elapsed
Physical Reads Executions per Exec %Total Time (s) Time (s) SQL Id
19,836 38 522.0 2.1 25.40 50.00 1r0wh3v6bayyk
With regards
kccrga

Oscar,
I've read Carys paper and a good paper it is.
The point I was trying to get across is that there should be no rules of thumb. (par this one of course ;) )
It all depends. Should one concentrate on reducing cpu usage on a disk-bound system? Is doing, say, 100 single-block reads from disk faster than doing 100 current mode gets?

Sql query cache issue

I am trying to see the log file in Manage sessions for the sql query in Answers. I see that if we run the same report multiple times, the sql query is showing up only the first time. Second time if I run it is not showing up. If I do a brand new report with diff columns picked it is giving me the sql then. Where do I set this option to show the sql query everytime I run a report even if it is the same report run multiple times. Is this caching issue?

It shouldn't.... Have you unchecked the "Cache" on the physical layer for this table? If you go onto the Advanced tab, is the option "Bypass the Oracle BI cache" checked?

SQL Query C# Using Execution Plan Cache Without SP

I have a situation where i am executing an SQL query thru c# code. I cannot use a stored procedure because the database is hosted by another company and i'm not allowed to create any new procedures. If i run my query on the sql mgmt studio the first time
is approx 3 secs then every query after that is instant. My query is looking for date ranges and accounts. So if i loop thru accounts each one takes approx 3 secs in my code. If i close the program and run it again the accounts that originally took 3 secs
now are instant in my code. So my conclusion was that it is using an execution plan that is cached. I cannot find how to make the execution plan run on non-stored procedure code. I have created a sqlcommand object with my queary and 3 params. I loop thru each
one keeping the same command object and only changing the 3 params. It seems that each version with the different params are getting cached in the execution plans so they are now fast for that particular query. My question is how can i get sql to not do this
by either loading the execution plan or by making sql think that my query is the same execution plan as the previous? I have found multiple questions on this that pertain to stored procedures but nothing i can find with direct text query code.
Bob;

I did the query running different accounts and different dates with instant results AFTER the very first query that took the expected 3 secs. I changed all 3 fields that i've got code for parameters for and it still remains instant in the mgmt studio but
still remains slow in my code. I'm providing a sample of the base query i'm using.
select i.Field1, i.Field2,
d.Field3 'Field3',
ip.Field4 'Field4',
k.Field5 'Field5'
from SampleDataTable1 i,
SampleDataTable2 k,
SampleDataTable3 ip,
SampleDataTable4 d
where i.Field1 = k.Field1 and i.Field4 = ip.Field4
i.FieldDate between '<fromdate>' and '<thrudate>'
and k.Field6 = <Account>
Obviously the field names have been altered because the database is not mine but other then the actual names it is accurate. It works it just takes too long in code as described in the initial post.
My params setup during the init for the connection and the command.
sqlCmd.Parameters.Add("@FromDate", SqlDbType.DateTime);
sqlCmd.Parameters.Add("@ThruDate", SqlDbType.DateTime);
sqlCmd.Parameters.Add("@Account", SqlDbType.Decimal);
Each loop thru the code changes these 3 fields.
sqlCommand.Parameters["@FromDate"].Value = dtFrom;
sqlCommand.Parameters["@ThruDate"].Value = dtThru;
sqlCommand.Parameters["@Account"].Value = sAccountNumber;
SqlDataReader reader = sqlCommand.ExecuteReader();
while (reader.Read())
reader.Close();
One thing i have noticed is that the account field is decimal(20,0) and by default the init i'm using defaults to decimal(10) so i'm going to change the init to
sqlCmd.Parameters["@Account"].Precision = 20;
sqlCmd.Parameters["@Account"].Scale = 0;
I don't believe this would change anything but at this point i'm ready to try anything to get the query running faster.
Bob;

DB buffer cache vs. SQL query & PL/SQL function result cache

Hi all,
Started preparing for OCA cert. just myself using McGraw Hill's exam guide. Have a question about memory structures.
Actually, DB buffer cache is used to copy e.g. SELECT queries result data blocks, that can be reused by another session (server process).
There is also additional otion - SQL query & PL/SQL function result cache (from 11g), where also stored the results of such queries.
Do they do the same thing or nevertheless there is some difference, different purpose?
thanks in advance...

There is also additional otion - SQL query & PL/SQL function result cache (from 11g), where also stored the results of such queries.Result cache located in shared pool.So it is one component of shared pool.When server process execute query(and if you configured result cache) then result will store in shared pool.Then next execution time run time mechanism will detect and consider using result cache without executing this query(if data was not changed this is happen detection time)
Do they do the same thing or nevertheless there is some difference, different purpose?.Buffer cache and result cache are different things and purpose also,but result cache introduced to improve response time of query in 11g(but such mechanism also implemented in 10g subquery execution,in complex query).In buffer cache holds data blocks but not such results.
Edited by: Chinar on Nov 4, 2011 4:40 AM
(Removing lots of "But" word from sentences :-) )

Issue in creation of group in oim database through sql query.

hi guys,
i am trying to create a group in oim database through sql query:
insert into ugp(ugp_key,ugp_name,ugp_create,ugp_update,ugp_createby,ugp_updateby,)values(786,'dbrole','09-jul-12','09-jul-12',1,1);
it is inserting the group in ugp table but it is not showing in admin console.
After that i also tried with this query:
insert into gpp(ugp_key,gpp_ugp_key,gpp_write,gpp_delete,gpp_create,gpp_createby,gpp_update,gpp_updateby)values(786,1,1,1,'09-jul-12',1,'09-jul-12',1);
After that i tried with this query.but still no use.
and i also tried to assign a user to the group through query:
insert into usg(ugp_key,usr_key,usg_priority,usg_create,usg_update,usg_createby,usg_updateby)values(4,81,1,'09-jul-12','09-jul-12',1,1);
But still the same problem.it is inserting in db.but not listing in admin console.
thanks,
hanuman.

Hanuman Thota wrote:
hi vladimir,
i didn't find this 'ugp_seq'.is this a table or column?where is it?
It is a sequence.
See here for details on oracle sequences:
http://www.techonthenet.com/oracle/sequences.php
Most of the OIM database schema is created with the following script, located in the RCU distribution:
$RCU_HOME/rcu/integration/oim/sql/xell.sql
there you'll find plenty of sequence creation directives like:
create sequence UGP_SEQ
increment by 1
start with 1
cache 20
to create a sequence, and
INSERT INTO UGP (UGP_KEY, UGP_NAME, UGP_UPDATEBY, UGP_UPDATE, UGP_CREATEBY, UGP_CREATE,UGP_ROWVER, UGP_DATA_LEVEL, UGP_ROLE_CATEGORY_KEY, UGP_ROLE_OWNER_KEY, UGP_DISPLAY_NAME, UGP_ROLENAME, UGP_DESCRIPTION, UGP_NAMESPACE)
VALUES (ugp_seq.nextval,'SYSTEM ADMINISTRATORS', sysadmUsrKey , SYSDATE,sysadmUsrKey , SYSDATE, hextoraw('0000000000000000'), 1, roleCategoryKey, sysadmUsrKey, 'SYSTEM ADMINISTRATORS', 'SYSTEM ADMINISTRATORS', 'System Administrator role for OIM', 'Default');
as a sequence usage example.
Regards,
Vladimir

Query based Report (Reports From SQL Query)

Hi All,
I am facing a problem with a report. I need your help.
I am creating a Report From SQL Query (Portal) with some arguments passed at runtime. I am able to view the output, if the query returns few rows ( arount 1000 rows). But for some inputs it needs to generate >15000 records, at this point the page is getting time out (i think!) and showing error page. I am able to execute query from the SQL Plus console ot using TOAD editor. Here the query is not taking more that 2 mins time to show the result.
If i am executing from Portal i observed that, once i give the appropriate input and hit submit button a new oracle process is getting created for the query on UNIX (I am usign "TOP" command to check processes). The browser page will be shown error page after 5 minutes (i am assuming session time out!) , but on the backend the process will be executed for more than 30 mins.
Can i increase a timeout of portal page, how i can do this?
The data returned as a result of the query is sized more than 10 MB. Is caching this much data is possible by the browser page? is the returned data is creating any problem here.
Please help me to find appropriate reasone for the failure?

Can you post the URL that is giving you the page not found error ? I am not sure if I can be of much help though.
In order to increase your chances to get a reply you should also post your question in the Portal Forum - Oracle Application Server Portal
Edited by: Rodolfo Ferrari on Jun 16, 2009 3:49 PM

Need help in Report From SQL Query

Hi All,
I am facing a problem with a report. I need your help.
I am creating a Report From SQL Query (Portal) with some arguments passed at runtime. I am able to view the output, if the query returns few rows ( arount 1000 rows). But for some inputs it needs to generate >15000 records, at this point the page is getting time out (i think!) and showing error page. I am able to execute query from the SQL Plus console ot using TOAD editor. Here the query is not taking more that 2 mins time to show the result.
If i am executing from Portal i observed that, once i give the appropriate input and hit submit button a new oracle process is getting created for the query on UNIX (I am usign "TOP" command to check processes). The browser page will be shown error page after 5 minutes (i am assuming session time out!) , but on the backend the process will be executed for more than 30 mins.
I tried also increase the page time out in httpd.conf, but no use.
The data returned as a result of the query is sized more than 10 MB. Is caching this much data is possible by the browser page? is the returned data is creating any problem here.
Please help me to find appropriate reasone for the failure?

user602513 wrote:
Hi All,
I am facing a problem with a report. I need your help.
I am creating a Report From SQL Query (Portal) with some arguments passed at runtime. I am able to view the output, if the query returns few rows ( arount 1000 rows). But for some inputs it needs to generate >15000 records, at this point the page is getting time out (i think!) and showing error page. I am able to execute query from the SQL Plus console ot using TOAD editor. Here the query is not taking more that 2 mins time to show the result.
If i am executing from Portal i observed that, once i give the appropriate input and hit submit button a new oracle process is getting created for the query on UNIX (I am usign "TOP" command to check processes). The browser page will be shown error page after 5 minutes (i am assuming session time out!) , but on the backend the process will be executed for more than 30 mins.
I tried also increase the page time out in httpd.conf, but no use.
The data returned as a result of the query is sized more than 10 MB. Is caching this much data is possible by the browser page? is the returned data is creating any problem here.
Please help me to find appropriate reasone for the failure?Do you get any errors or warnings or it is just the slow speed which is the issue?
There could be a variety of reasons for the delayed processing of this report. That includes parameter settings for that page, cache settings, network configurations, etc.
- explore best optimization for your query;
- evaluate portal for best performance configuration; you may follow this note (Doc ID: *438794.1* ) for ideas;
- third: for that particular page carrying that report, you can use caching wisely. browser cache is neither decent for large files, nor practical. instead, explore the page cache settings that portal provides.
- also look for various log files (application.log and apache logs) if you are getting any warnings reflecting on some kind of processing halt.
- and last but not the least: if you happen to bring up a portal report with more than 10000 rows for display then think about the usage of the report. Evaluate whether that report is good/useful for anything?
HTH
AMN

OutOfMemory error while executing sql query

Hello!
My program gets multiple datas from database in every ten minutes, and stores them in memory for hundreds of users, requesting datas via web-interface simoultaneously.
I dont have access to change database structures, write stored procedures, etc, just read from db.
There is a table in database with lot of million rows, and sometimes when I try to execute a SELECT on this table it takes minutes to get back the result.
To avoid waiting for database server for a long time, I set querytimeout to 30 seconds.
If the server throws back the execution with Query Timed out Exception, I want to 'forget' this data, and 0 value is acceptable because of fast run is more important. So I put the boolean broken variable to check if there is any problem with db server.
The size of the used memory is about 150Mb if things going well, but I set the max heap to 512 MB, just in case anything happens.
I'm logging all threads stacktrace, and free/used/allocated memory size in every 5 seconds.(threadwatching.log) 2.appendix
Sometimes, not in every case (I dont know what is this depends on), when I get the next phase of refreshing cached datas (you can see it below), the process reaches the fiorst checkpoint (signed in code below), starts to execute the sql query, and never reaches the second checkpoint , but used memory growing 50-60 Mb-os in every 5 seconds, as I can see in threadwatching.log until it reaches the max memory and throws OutOfMemory error: java heap space.
I'm using DbConnectionBroker for connection pooling, SQLCommandBean for handling Statements, PreparedStatements, etc, and jTDS jdbc connector.
SQLCommandBean closes statements, resultsets, so these objects doesnt stays open.
I cant figured out what causes the memory leak, if someone have an idea, please help me.
1. Part of the cached data refreshing (DataFactory.createPCVPPMforSiemens()):
        PCVElement element = new PCVElement(m, ProcessControlView.PPM);
        String s = DateTime.getDate(interval.getStartDate());
        boolean broken=false;
        int value = 0;
        for (int j = 0; j < 48; j++) {
            try {
                if (!broken) {
                    d1 = DateTime.getDate(new Date(start + ((j + 1) * 600000)));
                    sqlBean = new SQLCommandBean();
                    conn = broker.getConnection();
                    sqlBean.setConnection(conn);
                    sqlBean.setQueryTimeOut(30);
                    System.out.println(DateTime.getDate(new Date())+" "+m.getName()+"   "+j);// first checkpoint
                    value = SiemensWorks.getPCVPPM(sqlBean, statId, s, d1);
                    System.out.println(DateTime.getDate(new Date())+" "+m.getName()+"   "+j);// second checkpoint
                } else value=0;
            } catch (Exception ex) {
                System.out.println("ERROR: DataFactory.createPCVPPMforSiemens 1 :" + ex.getMessage());
                ex.printStackTrace();
                value = 0;
                broken=true;
            } finally {
                try {
                    broker.freeConnection(conn);
                } catch (Exception ex) {}
            element.getAvgValues()[j] = value;
        }2. SiemensWorks.getPCVPPM()
    public static int getPCVPPM(SQLCommandBean sqlBean,int statID,String start,String end)
            throws SQLException, UnsupportedTypeException, NoSuchColumnException {
        sqlBean.setSqlValue(SiemensSQL.PCV_PPM);
        Vector values=new Vector();
        values.add(new StringValue(statID+""));
        values.add(new StringValue(start));
        values.add(new StringValue(end));
        sqlBean.setValues(values);
        Vector rows=sqlBean.executeQuery();
        if (rows==null || rows.size()==0) return 0;
        Row row=(Row)rows.firstElement();
        try {
            float ret=Float.parseFloat(row.getString(1));
            if (ret<=0) ret=0;
            return Math.round(ret);
        } catch (Exception ex) {
            return 0;
    }3. Part of Threadwatching.log
2006-10-13 16:46:56 Name: SMT Refreshing Threads
2006-10-13 16:46:56 Thread count: 4
2006-10-13 16:46:56 Active count: 4
2006-10-13 16:46:56 Active group count: 0
2006-10-13 16:46:56 Daemon: false
2006-10-13 16:46:56 Priority: 5
2006-10-13 16:46:57 Free memory: 192,228,944 bytes
2006-10-13 16:46:57 Max memory: 332,988,416 bytes
2006-10-13 16:46:57 Memory in use: 140,759,472 bytes
2006-10-13 16:46:57 ---------------------------------
2006-10-13 16:46:57 0. Name: CachedLayerTimer
2006-10-13 16:46:57 0. Id: 19
2006-10-13 16:46:57 0. Priority: 5
2006-10-13 16:46:57 0. Parent: SMT Refreshing Threads
2006-10-13 16:46:57 0. State: RUNNABLE
2006-10-13 16:46:57 0. Alive: true
2006-10-13 16:46:57 java.io.FileOutputStream.close0(Native Method)
2006-10-13 16:46:57 java.io.FileOutputStream.close(Unknown Source)
2006-10-13 16:46:57 sun.nio.cs.StreamEncoder$CharsetSE.implClose(Unknown Source)
2006-10-13 16:46:57 sun.nio.cs.StreamEncoder.close(Unknown Source)
2006-10-13 16:46:57 java.io.OutputStreamWriter.close(Unknown Source)
2006-10-13 16:46:57 xcompany.smtmonitor.chart.ChartCreator.createChart(ChartCreator.java:663)
2006-10-13 16:46:57 xcompany.smtmonitor.chart.ChartCreator.create(ChartCreator.java:441)
2006-10-13 16:46:57 xcompany.smtmonitor.CachedLayerRefreshenerTask.run(CachedLayerRefreshenerTask.java:463)
2006-10-13 16:46:57 java.util.TimerThread.mainLoop(Unknown Source)
2006-10-13 16:46:57 java.util.TimerThread.run(Unknown Source)
Software runs well until I get the DataFactory.createPCVPPMforSiemens function in my code ->
2006-10-13 16:47:01 Name: SMT Refreshing Threads
2006-10-13 16:47:01 Thread count: 4
2006-10-13 16:47:01 Active count: 4
2006-10-13 16:47:01 Active group count: 0
2006-10-13 16:47:01 Daemon: false
2006-10-13 16:47:01 Priority: 5
2006-10-13 16:47:02 Free memory: 189,253,304 bytes
2006-10-13 16:47:02 Max memory: 332,988,416 bytes
2006-10-13 16:47:02 Memory in use: 143,735,112 bytes
2006-10-13 16:47:02 ---------------------------------
2006-10-13 16:47:02 0. Name: CachedLayerTimer
2006-10-13 16:47:02 0. Id: 19
2006-10-13 16:47:02 0. Priority: 5
2006-10-13 16:47:02 0. Parent: SMT Refreshing Threads
2006-10-13 16:47:02 0. State: RUNNABLE
2006-10-13 16:47:02 0. Alive: true
2006-10-13 16:47:02 java.util.LinkedList$ListItr.previous(Unknown Source)
2006-10-13 16:47:02 net.sourceforge.jtds.util.TimerThread.setTimer(TimerThread.java:174)
2006-10-13 16:47:02 net.sourceforge.jtds.jdbc.TdsCore.wait(TdsCore.java:3734)
2006-10-13 16:47:02 net.sourceforge.jtds.jdbc.TdsCore.executeSQL(TdsCore.java:997)
2006-10-13 16:47:02 net.sourceforge.jtds.jdbc.JtdsStatement.executeSQLQuery(JtdsStatement.java:320)
2006-10-13 16:47:02 net.sourceforge.jtds.jdbc.JtdsPreparedStatement.executeQuery(JtdsPreparedStatement.java:667)
2006-10-13 16:47:02 xcompany.database.sql.SQLCommandBean.executeQuery(SQLCommandBean.java:91)
2006-10-13 16:47:02 xcompany.smtmonitor.data.SiemensWorks.getPCVPPM(SiemensWorks.java:409)
2006-10-13 16:47:02 xcompany.smtmonitor.data.DataFactory.createPCVPPMforSiemens(DataFactory.java:6103)
2006-10-13 16:47:02 xcompany.smtmonitor.data.DataFactory.refreshProcessControlView(DataFactory.java:5791)
2006-10-13 16:47:02 xcompany.smtmonitor.CachedLayerRefreshenerTask.run(CachedLayerRefreshenerTask.java:514)
2006-10-13 16:47:02 java.util.TimerThread.mainLoop(Unknown Source)
2006-10-13 16:47:02 java.util.TimerThread.run(Unknown Source)
2006-10-13 16:47:06 Name: SMT Refreshing Threads
2006-10-13 16:47:06 Thread count: 4
2006-10-13 16:47:06 Active count: 4
2006-10-13 16:47:06 Active group count: 0
2006-10-13 16:47:06 Daemon: false
2006-10-13 16:47:06 Priority: 5
2006-10-13 16:47:08 Free memory: 127,428,192 bytes
2006-10-13 16:47:08 Max memory: 332,988,416 bytes
2006-10-13 16:47:08 Memory in use: 205,560,224 bytes
2006-10-13 16:47:08 ---------------------------------
2006-10-13 16:47:08 0. Name: CachedLayerTimer
2006-10-13 16:47:08 0. Id: 19
2006-10-13 16:47:08 0. Priority: 5
2006-10-13 16:47:08 0. Parent: SMT Refreshing Threads
2006-10-13 16:47:08 0. State: RUNNABLE
2006-10-13 16:47:08 0. Alive: true
2006-10-13 16:47:08 java.util.LinkedList$ListItr.previous(Unknown Source)
2006-10-13 16:47:08 net.sourceforge.jtds.util.TimerThread.setTimer(TimerThread.java:174)
2006-10-13 16:47:08 net.sourceforge.jtds.jdbc.TdsCore.wait(TdsCore.java:3734)
2006-10-13 16:47:08 net.sourceforge.jtds.jdbc.TdsCore.executeSQL(TdsCore.java:997)
2006-10-13 16:47:08 net.sourceforge.jtds.jdbc.JtdsStatement.executeSQLQuery(JtdsStatement.java:320)
2006-10-13 16:47:08 net.sourceforge.jtds.jdbc.JtdsPreparedStatement.executeQuery(JtdsPreparedStatement.java:667)
2006-10-13 16:47:08 xcompany.database.sql.SQLCommandBean.executeQuery(SQLCommandBean.java:91)
2006-10-13 16:47:08 xcompany.smtmonitor.data.SiemensWorks.getPCVPPM(SiemensWorks.java:409)
2006-10-13 16:47:08 xcompany.smtmonitor.data.DataFactory.createPCVPPMforSiemens(DataFactory.java:6103)
2006-10-13 16:47:08 xcompany.smtmonitor.data.DataFactory.refreshProcessControlView(DataFactory.java:5791)
2006-10-13 16:47:08 xcompany.smtmonitor.CachedLayerRefreshenerTask.run(CachedLayerRefreshenerTask.java:514)
2006-10-13 16:47:08 java.util.TimerThread.mainLoop(Unknown Source)
2006-10-13 16:47:08 java.util.TimerThread.run(Unknown Source)
2006-10-13 16:47:12 Name: SMT Refreshing Threads
2006-10-13 16:47:12 Thread count: 4
2006-10-13 16:47:12 Active count: 4
2006-10-13 16:47:12 Active group count: 0
2006-10-13 16:47:12 Daemon: false
2006-10-13 16:47:12 Priority: 5
2006-10-13 16:47:15 Free memory: 66,760,208 bytes
2006-10-13 16:47:15 Max memory: 332,988,416 bytes
2006-10-13 16:47:15 Memory in use: 266,228,208 bytes
2006-10-13 16:47:15 ---------------------------------
2006-10-13 16:47:15 0. Name: CachedLayerTimer
2006-10-13 16:47:15 0. Id: 19
2006-10-13 16:47:15 0. Priority: 5
2006-10-13 16:47:15 0. Parent: SMT Refreshing Threads
2006-10-13 16:47:15 0. State: RUNNABLE
2006-10-13 16:47:15 0. Alive: true
2006-10-13 16:47:15 java.util.LinkedList.addBefore(Unknown Source)
2006-10-13 16:47:15 java.util.LinkedList.access$300(Unknown Source)
2006-10-13 16:47:15 java.util.LinkedList$ListItr.add(Unknown Source)
2006-10-13 16:47:15 net.sourceforge.jtds.util.TimerThread.setTimer(TimerThread.java:175)
2006-10-13 16:47:15 net.sourceforge.jtds.jdbc.TdsCore.wait(TdsCore.java:3734)
2006-10-13 16:47:15 net.sourceforge.jtds.jdbc.TdsCore.executeSQL(TdsCore.java:997)
2006-10-13 16:47:15 net.sourceforge.jtds.jdbc.JtdsStatement.executeSQLQuery(JtdsStatement.java:320)
2006-10-13 16:47:15 net.sourceforge.jtds.jdbc.JtdsPreparedStatement.executeQuery(JtdsPreparedStatement.java:667)
2006-10-13 16:47:15 xcompany.database.sql.SQLCommandBean.executeQuery(SQLCommandBean.java:91)
2006-10-13 16:47:15 xcompany.smtmonitor.data.SiemensWorks.getPCVPPM(SiemensWorks.java:409)
2006-10-13 16:47:15 xcompany.smtmonitor.data.DataFactory.createPCVPPMforSiemens(DataFactory.java:6103)
2006-10-13 16:47:15 xcompany.smtmonitor.data.DataFactory.refreshProcessControlView(DataFactory.java:5791)
2006-10-13 16:47:15 xcompany.smtmonitor.CachedLayerRefreshenerTask.run(CachedLayerRefreshenerTask.java:514)
2006-10-13 16:47:15 java.util.TimerThread.mainLoop(Unknown Source)
2006-10-13 16:47:15 java.util.TimerThread.run(Unknown Source)
2006-10-13 16:47:17 Name: SMT Refreshing Threads
2006-10-13 16:47:17 Thread count: 4
2006-10-13 16:47:17 Active count: 4
2006-10-13 16:47:17 Active group count: 0
2006-10-13 16:47:17 Daemon: false
2006-10-13 16:47:17 Priority: 5
2006-10-13 16:47:20 Free memory: 23,232,496 bytes
2006-10-13 16:47:20 Max memory: 332,988,416 bytes
2006-10-13 16:47:20 Memory in use: 309,755,920 bytes
2006-10-13 16:47:20 ---------------------------------
2006-10-13 16:47:20 0. Name: CachedLayerTimer
2006-10-13 16:47:20 0. Id: 19
2006-10-13 16:47:20 0. Priority: 5
2006-10-13 16:47:20 0. Parent: SMT Refreshing Threads
2006-10-13 16:47:20 0. State: RUNNABLE
2006-10-13 16:47:20 0. Alive: true
2006-10-13 16:47:20 net.sourceforge.jtds.util.TimerThread.setTimer(TimerThread.java:171)
2006-10-13 16:47:20 net.sourceforge.jtds.jdbc.TdsCore.wait(TdsCore.java:3734)
2006-10-13 16:47:20 net.sourceforge.jtds.jdbc.TdsCore.executeSQL(TdsCore.java:997)
2006-10-13 16:47:20 net.sourceforge.jtds.jdbc.JtdsStatement.executeSQLQuery(JtdsStatement.java:320)
2006-10-13 16:47:20 net.sourceforge.jtds.jdbc.JtdsPreparedStatement.executeQuery(JtdsPreparedStatement.java:667)
2006-10-13 16:47:20 xcompany.database.sql.SQLCommandBean.executeQuery(SQLCommandBean.java:91)
2006-10-13 16:47:20 xcompany.smtmonitor.data.SiemensWorks.getPCVPPM(SiemensWorks.java:409)
2006-10-13 16:47:20 xcompany.smtmonitor.data.DataFactory.createPCVPPMforSiemens(DataFactory.java:6103)
2006-10-13 16:47:20 xcompany.smtmonitor.data.DataFactory.refreshProcessControlView(DataFactory.java:5791)
2006-10-13 16:47:20 xcompany.smtmonitor.CachedLayerRefreshenerTask.run(CachedLayerRefreshenerTask.java:514)
2006-10-13 16:47:20 java.util.TimerThread.mainLoop(Unknown Source)
2006-10-13 16:47:20 java.util.TimerThread.run(Unknown Source)
2006-10-13 16:47:23 Name: SMT Refreshing Threads
2006-10-13 16:47:23 Thread count: 4
2006-10-13 16:47:23 Active count: 4
2006-10-13 16:47:23 Active group count: 0
2006-10-13 16:47:23 Daemon: false
2006-10-13 16:47:23 Priority: 5
2006-10-13 16:47:26 Free memory: 4,907,336 bytes
2006-10-13 16:47:26 Max memory: 332,988,416 bytes
2006-10-13 16:47:26 Memory in use: 328,083,768 bytes
2006-10-13 16:47:26 ---------------------------------
2006-10-13 16:47:26 0. Name: CachedLayerTimer
2006-10-13 16:47:26 0. Id: 19
2006-10-13 16:47:26 0. Priority: 5
2006-10-13 16:47:26 0. Parent: SMT Refreshing Threads
2006-10-13 16:47:26 0. State: RUNNABLE
2006-10-13 16:47:26 0. Alive: true
2006-10-13 16:47:26 java.util.LinkedList.addBefore(Unknown Source)
2006-10-13 16:47:26 java.util.LinkedList.access$300(Unknown Source)
2006-10-13 16:47:26 java.util.LinkedList$ListItr.add(Unknown Source)
2006-10-13 16:47:26 net.sourceforge.jtds.util.TimerThread.setTimer(TimerThread.java:175)
2006-10-13 16:47:26 net.sourceforge.jtds.jdbc.TdsCore.wait(TdsCore.java:3734)
2006-10-13 16:47:26 net.sourceforge.jtds.jdbc.TdsCore.executeSQL(TdsCore.java:997)
2006-10-13 16:47:26 net.sourceforge.jtds.jdbc.JtdsStatement.executeSQLQuery(JtdsStatement.java:320)
2006-10-13 16:47:26 net.sourceforge.jtds.jdbc.JtdsPreparedStatement.executeQuery(JtdsPreparedStatement.java:667)
2006-10-13 16:47:26 xcompany.database.sql.SQLCommandBean.executeQuery(SQLCommandBean.java:91)
2006-10-13 16:47:26 xcompany.smtmonitor.data.SiemensWorks.getPCVPPM(SiemensWorks.java:409)
2006-10-13 16:47:26 xcompany.smtmonitor.data.DataFactory.createPCVPPMforSiemens(DataFactory.java:6103)
2006-10-13 16:47:26 xcompany.smtmonitor.data.DataFactory.refreshProcessControlView(DataFactory.java:5791)
2006-10-13 16:47:26 xcompany.smtmonitor.CachedLayerRefreshenerTask.run(CachedLayerRefreshenerTask.java:514)
2006-10-13 16:47:26 java.util.TimerThread.mainLoop(Unknown Source)
2006-10-13 16:47:26 java.util.TimerThread.run(Unknown Source)
2006-10-13 16:47:35 Name: SMT Refreshing Threads
2006-10-13 16:47:37 Thread count: 4
2006-10-13 16:47:38 Active count: 4
2006-10-13 16:47:38 Active group count: 0
2006-10-13 16:47:38 Daemon: false
2006-10-13 16:47:38 Priority: 5
2006-10-13 16:47:42 Free memory: 35,316,120 bytes
2006-10-13 16:47:42 Max memory: 332,988,416 bytes
2006-10-13 16:47:42 Memory in use: 297,672,296 bytes
2006-10-13 16:47:42 ---------------------------------
2006-10-13 16:47:42 0. Name: CachedLayerTimer
2006-10-13 16:47:42 0. Id: 19
2006-10-13 16:47:42 0. Priority: 5
2006-10-13 16:47:42 0. Parent: SMT Refreshing Threads
2006-10-13 16:47:42 0. State: TIMED_WAITING
2006-10-13 16:47:42 0. Alive: true
2006-10-13 16:47:42 java.lang.Object.wait(Native Method)
2006-10-13 16:47:42 java.util.TimerThread.mainLoop(Unknown Source)
2006-10-13 16:47:42 java.util.TimerThread.run(Unknown Source)
4. Tomcat default logging file:
2006-10-13 16:47:36 ERROR CachedLayerRefreshenerTask: external error: Java heap space
5. DbConnectionBroker (connection pooling) logging file:
Handing out connection 1 --> 10/13/2006 04:47:01 PM
Handing out connection 0 --> 10/13/2006 04:47:01 PM
Handing out connection 1 --> 10/13/2006 04:47:01 PM
Handing out connection 0 --> 10/13/2006 04:47:02 PM
Warning. Connection 0 in use for 3141 ms
Warning. Connection 0 in use for 24891 ms
----> Error: Could not free connection!!!
I would appreciate for any help.

What does your query bring back from this table?This is the query:
SELECT case sum(c.picked) when 0 then 0 else
((sum(c.picked)-(sum(c.picked)-(sum(c.vacuum)+sum(c.id
ent))))*cast((1000000/cast(sum(c.picked) as float))
as bigint)) end as PPM
FROM sip_comp c
LEFT JOIN sip_pcb pc ON pc.id=c.pcbid
LEFT JOIN sip_period p on p.id=pc.periodid
WHERE p.stationid=? AND pc.time BETWEEN ? AND ?Has anybody who knows SQL tried EXPLAIN PLAN to optimize this table? You're joining on a table with a million rows and you're wondering why the performance is poor?
What is the index situation with these tables?
.> When I execute it from query manager, it takes from 1
to 60 secs depend on servers availability. So how will that be any different for JDBC and Java?
..> You're right. Thats why I am here.
What I mean by that is we can't read minds, either. You need to get some hard data to tell you where the bottleneck is. Asking at a forum won't help.
But tell me, if the java process enters to this query
execution, and doesnt quit until OOM thrown, how can
be the problem in caching?I was guessing about caching, because I didn't know what the query was.
You expect a lot.
.> No.
Then how do you ever expect to solve this?
I tried YourKit Profiler at home, where I'm
developing software, but this OOM never thrown here,
even if I have the same database size.Then you aren't replicating the problem. You have to run it on the system that has the problem if you're going to solve it.
YourKit isn't an industry leader. How well do you know how to use it?
It just happened at the company where the system
runs, and I cannot run this profiler there because
the PC where my tomcat runs dramatically slowed.You have to run something to figure out what the problem is. What about Log4J, some trace logging statements and a batch job to harvest the log?
Bottom line: you've got to be a scientist and get some real data. We can theorize all we want here, but that won't get you to a solution.
%

SQL query execution Issue

Hi,
Facing Database performance issue while runing overnight batches.
Generate tfprof output for that batch and found some sql query which is having high elapsed time. Could any one please let me know what is the issue for this. It will also be great help if anyone suggest what need to be done as per tuning of this sql queries so as to get better responce time.
Waiting for your reply.
Effected SQL List:
INSERT INTO INVTRNEE (TRANS_SESSION, TRANS_SEQUENCE, TRANS_ORG_CHILD,
TRANS_PRD_CHILD, TRANS_TRN_CODE, TRANS_TYPE_CODE, TRANS_DATE, INV_MRPT_CODE,
INV_DRPT_CODE, TRANS_CURR_CODE, PROC_SOURCE, TRANS_REF, TRANS_REF2,
TRANS_QTY, TRANS_RETL, TRANS_COST, TRANS_VAT, TRANS_POS_EXT_TOTAL,
INNER_PK_TECH_KEY, TRANS_INNERS, TRANS_EACHES, TRANS_UOM, TRANS_WEIGHT,
TRANS_WEIGHT_UOM )
VALUES
(:B22 , :B1 , :B2 , :B3 , :B4 , :B5 , :B21 , :B6 , :B7 , :B8 , :B20 , :B19 ,
NULL, :B9 , :B10 , :B11 , 0.0, :B12 , :B13 , :B14 , :B15 , :B16 , :B17 ,
:B18 )
call count cpu elapsed disk query current rows
Parse 722 0.09 0.04 0 0 0 0
Execute 1060 7.96 83.01 11442 21598 88401 149973
Fetch 0 0.00 0.00 0 0 0 0
total 1782 8.05 83.06 11442 21598 88401 149973
Misses in library cache during parse: 1
Optimizer goal: CHOOSE
UPDATE /*+ ROWID(TRFDTLEE) */TRFDTLEE SET TRF_STATUS = :B2
WHERE
ROWID = :B1
call count cpu elapsed disk query current rows
Parse 635 0.03 0.01 0 0 0 0
Execute 49902 14.48 271.25 41803 80704 355837 49902
Fetch 0 0.00 0.00 0 0 0 0
total 50537 14.51 271.27 41803 80704 355837 49902
Misses in library cache during parse: 1
Optimizer goal: CHOOSE
DECLARE
var_trans_session     invtrnee.trans_session%TYPE;
BEGIN
-- ADDED BY SHANKAR ON 08/29/97
-- GET THE NEXT AVAILABLE TRANS_SESSION
bastkey('trans_session',0,var_trans_session,'T');
-- MAS001
uk_trfbapuo_auto(var_trans_session,'UPLOAD','T',300);
-- MAS001 end
END;
call count cpu elapsed disk query current rows
Parse 0 0.00 0.00 0 0 0 0
Execute 1 24191.23 24028.57 8172196 10533885 187888 1
Fetch 0 0.00 0.00 0 0 0 0
total 1 24191.23 24028.57 8172196 10533885 187888 1
Misses in library cache during parse: 0
Misses in library cache during execute: 1
Optimizer goal: CHOOSE
SELECT INNER_PK_TECH_KEY
FROM
PRDPCDEE WHERE PRD_LVL_CHILD = :B1 AND LOOSE_PACK_FLAG = 'T'
call count cpu elapsed disk query current rows
Parse 1 0.01 0.00 0 0 0 0
Execute 56081 1.90 2.03 0 0 0 0
Fetch 56081 11.07 458.58 53792 246017 0 56081
total 112163 12.98 460.61 53792 246017 0 56081
Misses in library cache during parse: 1
Optimizer goal: CHOOSE
******************

First off, be aware of the assumptions I'm making. The SQL you presented above strongly suggests (to me at least) that you have cursor for loops. If that's the case, you need to review what their purpose is and look to convert them into single statement DML commands. For example if you have something like this
DECLARE
    ln_Count        NUMBER;
    ln_SomeValue    NUMBER;
BEGIN
    FOR lcr_Row IN (    SELECT pk_id,col1,col2 FROM some_table)
    LOOP
        SELECT
            COUNT(*)
        INTO
            ln_COunt
        FROM
            target_table
        WHERE
            pk_id = lcr_Row.pk_id;
        IF ln_Count = 0 THEN
            SELECT
                some_value
            INTO
                ln_SomeValue
            FROM
                some_other_table
            WHERE
                pk_id = lcr_Row.col1
            INSERT
            INTO
                target_table
                (   pk_id,
                    some_other_value,
                    col2
            VALUES
                (   lcr_Row.col1,
                    ln_SomeValue,
                    lcr_Row.col2
        ELSE
            UPDATE
                target_table
            SET
                some_other_value = ln_SomeValue
            WHERE
                pk_id = lcr_Row.col1;
        END IF;
    END LOOP;
END;                            it could be rewritten as
DECLARE
BEGIN
    MERGE INTO target_table b
    USING ( SELECT
                a.pk_id,
                a.col2,
                b.some_value
            FROM
                some_table a,
                some_other_table b
            WHERE
                b.pk_id = a.col1
           ) e
    ON (b.pk_id = e.pk_id)
    WHEN MATCHED THEN
      UPDATE SET b.some_other_value = e.some_value
    WHEN NOT MATCHED THEN
      INSERT ( b.pk_id,
                b.col2,
                b.some_other_value)
      VALUES(   b.pk_id,
                b.col2,
                b.some_value);
END;It's going to take a bit of analysis and work but the fastest and most scalable way to approach processing data is to use SQL rather than PL/SQL. PL/SQL data processing i.e. cursor loops should be an option of last resort.
HTH
David

Clarification on using function in where clause of oracle sql query

I have an issue in regarding function using where clause of sql query..
We are facing performance issue while executing query, so in what ways to improve the performance of the query which i have posted below.
select col ,case when my_function(parameter)
from tab1 a ,tab2 b,tabl3 c
where a.column1=b.column2
and b.column3 =c.column6
and my_function(parameter)>0
Regards
Dinesh
Edited by: wild fire on May 18, 2012 4:15 PM

Dinesh,
remind that when you use a function in the where clause it normally will get started for each record in the table.
So your answer is two-fold:
1. make the function only start when needed by adding a function based index on the table (this will make inserts and updates slower)
2. make the function faster by adding the DETERMINISTIC clause if possible. this will make Oracle "cache" the result of the function.
Regards,
Richard
blog: http://blog.warp11.nl
twitter: @rhjmartens
If this question is answered, please mark the thread as closed and assign points where earned..

How to get thr number of rows of an SQL query in JSTL

hi guys,
can anyone please tell me how do i perform a function which finds out the particular rownumber of an sql query in JSTL.....
the same code in jsp is:
<% plateRSet.getRowNum() %>
how do i do this given plateRset is the var for a given iteration
thanks
rahul

make your result set scrollable...Not such a good idea. With Oracle, the JDBC driver will read and cache all the ResultSet in memory (with other DBMSs/drivers the behavior will probably be different, but you will still have some unnecessary overhead).
You can do the caching yourself if you think it's worth it. If the piece of code you posted is why you need this for, then use a List or Vector and you won't need to know the size upfront.
Alin,
The jTDS Project.

Query result caching on oracle 9 and 10 vs indexing

I am trying to improve performance on oracle 9i and 10g.
We use some queries that take up to 30 minutes to execute.
I heard that there are some products to cache query results.
Would this have any advantage over using indexes or materialized views?
Does anyone know any products that I can use to cache the results of this queries on disk?
Personally I think that by using the query result caching I would reduce the cpu time needed to process the query.
Is this true?

Your message post pushes all the wrong buttons starting with the fact that 9i and 10g are marketing labels not version numbers.
You don't tune queries by spending money and throwing resources at them. You tune them by identifying the problem queries, running explain plans, visualizing their output using DBMS_XPLAN, and addressing the root cause.
If you want help post full version numbers, the SQL statements, and the DBMS_XPLAN outputs.

Sql query using LIKE is very slow

Hi,
I am running SQL query with LIKE on two table with more than two million records on oracle 10g and sun solaris OS. Does anybody have any idea or alternative to improve this query?
it will never use index because i m using LIKE '%xyz%'. I Have posted query below
PROCEDURE order_search
v_search_type_in IN VARCHAR2
,v_search_value1_in IN VARCHAR2 DEFAULT 'NONE'
,v_search_value2_in IN VARCHAR2 DEFAULT 'NONE'
,v_group_id_in IN bcf_groups.group_id%TYPE DEFAULT 0
,v_open_in IN NUMBER DEFAULT 0
,v_requested_in IN NUMBER DEFAULT 0
,v_cancelled_in IN NUMBER DEFAULT 0
,v_closed_in IN NUMBER DEFAULT 0
,v_employee_id_in IN sxweb00.customer.customer_id%TYPE DEFAULT 0
,outcursor IN OUT FulfillmentCurType
IS
v_status_code NUMBER;
v_upper_search_value1 VARCHAR2(500);
v_lower_search_value1 VARCHAR2(500);
v_open_status VARCHAR2(10);
v_closed_status VARCHAR2(10);
v_cancelled_status VARCHAR2(10);
v_requested_status VARCHAR2(10);
v_group_for_search bcf_groups.group_id%TYPE;
v_sql_select VARCHAR2(4000);
v_sql_from VARCHAR2(4000);
v_sql_where VARCHAR2(4000);
v_sql_order_by VARCHAR2(4000);
v_group_where VARCHAR2(100);
v_status_where VARCHAR2(500);
BEGIN
IF v_open_in = 1 THEN
v_open_status := 'OPEN';
END IF;
IF v_closed_in = 1 THEN
v_closed_status := 'CLOSED';
END IF;
IF v_cancelled_in = 1 THEN
v_cancelled_status := 'CANCELLED';
END IF;
IF v_requested_in = 1 THEN
v_requested_status := 'REQUESTED';
END IF;
IF UPPER(v_search_type_in) = 'GROUP'
THEN
v_group_for_search := v_search_value1_in;
ELSE
v_group_for_search := v_group_id_in;
END IF;
-- This is the select statement used for all search types
v_sql_select := ' '
|| 'po.order_id order_id '
|| ',decode('||v_group_id_in||',4,substr(bcf_locator.get_first_location(po.order_id,'||v_group_id_in||'),3),null) first_location '
|| ',TO_CHAR(po.order_date, ''mm/dd/yyyy'') order_date '
|| ',' || v_group_for_search || ' group_id '
|| ',TRIM(TO_CHAR(bcf_fulfillment.get_shipping_total(po.order_id,' || v_group_for_search || ') + bcf_fulfillment.get_tax_total(po.order_id,' || v_group_for_search || ') + bcf_fulfillment.get_subtotal(po.order_id,' || v_group_for_search || ') ,''$999,999,999,999,999,990.99'')) total '
|| ',bcf_fulfillment.get_billing_name (po.customer_id) billing_name '
|| ',bcf_fulfillment.get_open_and_assigned_count(po.order_id,' || v_group_for_search || ') open_and_assigned_count '
|| ',bcf_fulfillment.get_divisions(po.order_id,' || v_group_for_search || ') divisions '
|| ',bcf_fulfillment.get_division_count (po.order_id,' || v_group_for_search || ' ) division_count '
|| ',bcf_fulfillment.get_picker_list (po.order_id,' || v_group_for_search || ') picker_name '
|| ',bcf_fulfillment.get_picker_count (po.order_id,' || v_group_for_search || ') picker_count '
|| ',bcf_fulfillment.get_order_status(po.order_id,' || v_group_for_search || ') order_status '
|| ',po.customer_id customer_id '
-- IF there is only one unique picker then that means there are no unassigned or NULL pickers
-- therefore by default the checkbox should not be selected else the count picker_count is
-- 0 or > 1 meaning that at least one line item has an unassigned employee_id and by default
-- the checkbox should be selected
|| ',DECODE(bcf_fulfillment.get_picker_count(po.order_id,' || v_group_for_search || '),1 ,0,1) print_cb '
|| ',bcf_fulfillment.get_fulfillment_codes(po.order_id,' || v_group_for_search || ') fulfillment_types '
|| ',bcf_fulfillment.has_group_been_reassigned(po.order_id,' || v_group_for_search || ') group_reassigned_flag '
|| ',bcf_fulfillment.get_chain_codes(po.order_id,' || v_group_for_search || ') chain_codes '
|| ',po.status_id order_status_id '
|| ',bcf_fulfillment.get_viewed_by_picker_flag(po.order_id,' || v_group_for_search || ') viewed_by_picker_flag '
|| ',bcf_fulfillment.get_picker_list (po.order_id,' || v_group_for_search || ', ''N'') pickers_without_unassigned '
|| ',bcf_fulfillment.get_group_list (po.order_id) group_list '
|| ',bcf_fulfillment.get_line_item_count(po.order_id,' || v_group_for_search || ') line_item_count '
|| ',bcf_fulfillment.get_shipping_priority(po.order_id,' || v_group_for_search || ') shipping_priority'
-- Anna wants all users to know and always wants to know no matter what the status of the auth or order
|| ',(SELECT decode(count(*),0,''N'',''Y'') FROM bcf_payment WHERE ics_rflag = ''DAVSNO'' AND order_id = po.order_id AND status_code IN (''ATH2'',''FUL2'',''CPT0'',''CPT2'')) avs_failed'
|| ',trunc(po.order_date) date_for_sort'
-- When we need to look at all orders then the v_group_for_search will be zero i.e. customer service rep
IF v_group_for_search = 0 THEN
-- This is the core tables used by most search types
v_sql_from := ' '
|| 'FROM product_order po'
-- || ',bcf_lookup lu'
-- This is the core table join needed for most search types
v_sql_where := ' '
|| 'WHERE 1 = 1 '
-- No orders will be looked at for fulfillment purposes that occurred before the minimum
-- shipping cost functionality was added
-- || 'AND po.order_date >= lu.implement_date '
|| 'AND po.order_date >= (SELECT min(implement_date) FROM bcf_lookup) '
|| 'AND po.submitted_flag = 1 '
|| 'AND po.channel_code = ''BCF'' '
-- When we are looking at all orders then we are not going to restrict it by group
v_group_where := ' ';
-- This is used where the search type requires searching by the Open, Closed, and Cancelled status.
-- We are binding the three status variables so that they can be cached in Oracle and not need to be parsed after
-- the first search of a search type is done.
v_status_where := ' '
|| 'AND bcf_fulfillment.get_order_status(po.order_id,' || v_group_for_search|| ') '
|| 'IN (:v_open_status, :v_requested_status, :v_cancelled_status, :v_closed_status) '
ELSE
-- This is the core tables used by most search types
v_sql_from := ' '
|| 'FROM product_order po'
|| ',bcf_product_order_groups pog '
-- This is the core table join needed for most search types
v_sql_where := ' '
|| 'WHERE 1 = 1 '
|| 'AND po.order_id = pog.order_id '
|| 'AND po.channel_code = ''BCF'' '
-- This is used only where the search type requires searching by a group.
v_group_where := ' '
|| 'AND pog.group_id = ' || v_group_for_search
-- This is used where the search type requires searching by the Open, Closed, and Cancelled status.
-- We are binding the three status variables so that they can be cached in Oracle and not need to be parsed after
-- the first search of a search type is done.
v_status_where := ' '
|| 'AND pog.dn_status IN (:v_open_status, :v_requested_status, :v_cancelled_status, :v_closed_status) '
END IF;
-- If an employee_id is provided then we need to add in a where clause so that only orders that belong to that
-- employee are pulled
IF v_employee_id_in > 0
THEN
v_sql_where := v_sql_where
|| 'AND pog.dn_employee_id = ' || TO_CHAR(v_employee_id_in) || ' '
END IF;
IF v_group_id_in = get_group_fulfillment_center1
THEN
v_sql_order_by := 'ORDER BY '
|| 'bcf_fulfillment.get_division_count (po.order_id,' || v_group_for_search || ') '
|| ',bcf_fulfillment.get_divisions(po.order_id,' || v_group_for_search || ') '
|| ',po.order_id '
ELSIF v_group_id_in = c_GROUP_FULFILLMENT_CENTER_212
THEN
v_sql_order_by := 'ORDER BY '
|| 'bcf_fulfillment.get_shipping_priority(po.order_id,' || v_group_for_search || ') DESC'
|| ',TRUNC(po.order_date)'
|| ',bcf_fulfillment.get_line_item_count(po.order_id,' || v_group_for_search || ')'
|| ',decode('||v_group_id_in||',4,substr(bcf_locator.get_first_location(po.order_id,'||v_group_id_in||'),3),null)'
|| ',po.order_id'
ELSE
v_sql_order_by := 'ORDER BY '
|| ' bcf_fulfillment.get_shipping_priority(po.order_id,' || v_group_for_search || ') DESC'
|| ',chain_codes DESC'
|| ',po.order_id '
END IF;
IF UPPER(v_search_type_in) = 'ORDERNUMBER'
THEN
v_sql_where := v_sql_where || v_group_where
|| 'AND po.order_id = :v_search_value1_in '
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT ' || v_sql_select || v_sql_from || v_sql_where
USING v_search_value1_in;
ELSIF UPPER(v_search_type_in) = 'STATUSONLY'
THEN
v_sql_where := v_sql_where || v_group_where || v_status_where
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT ' || v_sql_select || v_sql_from || v_sql_where || v_sql_order_by
USING v_open_status, v_requested_status, v_cancelled_status, v_closed_status;
ELSIF UPPER(v_search_type_in) = 'BILLINGNAME'
THEN
v_upper_search_value1 := UPPER(v_search_value1_in);
v_sql_where := v_sql_where || ' ' || v_group_where
|| 'AND po.upper_billing_name LIKE ''%'' || :v_upper_search_value1 || ''%'' '
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT ' || v_sql_select || v_sql_from || v_sql_where || v_sql_order_by
USING v_upper_search_value1;
ELSIF UPPER(v_search_type_in) = 'GROUP'
THEN
IF v_search_value1_in = '0' -- Unassigned
THEN
v_sql_from := v_sql_from || ' ,product_order_detail_actv_v pod ';
v_sql_where := v_sql_where || ' ' || v_status_where
|| 'AND po.order_id = pod.order_id '
|| 'AND pod.group_id IS NULL '
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT DISTINCT ' || v_sql_select || v_sql_from || v_sql_where || v_sql_order_by
USING v_open_status, v_requested_status, v_cancelled_status, v_closed_status;
ELSE
v_sql_where := v_sql_where || ' ' || v_status_where
|| 'AND pog.group_id = :v_group_for_search '
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT ' || v_sql_select || v_sql_from || v_sql_where || v_sql_order_by
USING v_open_status, v_requested_status, v_cancelled_status, v_closed_status, v_group_for_search;
END IF;
ELSIF UPPER(v_search_type_in) = 'SHIPPINGNAME'
THEN
v_upper_search_value1 := UPPER(v_search_value1_in);
v_sql_where := v_sql_where || ' ' || v_group_where
|| 'AND po.upper_shipping_name LIKE ''%'' || :v_upper_search_value1 || ''%'' '
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT ' || v_sql_select || v_sql_from || v_sql_where || v_sql_order_by
USING v_upper_search_value1;
ELSIF UPPER(v_search_type_in) = 'USERNAME'
THEN
v_lower_search_value1 := LOWER(v_search_value1_in);
v_sql_from := v_sql_from || ' ,sxweb01.customer c ';
v_sql_where := v_sql_where || ' ' || v_group_where
|| 'AND po.customer_id = c.customer_id '
|| 'AND c.username LIKE ''%'' || :v_lower_search_value1 || ''%'' '
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT ' || v_sql_select || v_sql_from || v_sql_where || v_sql_order_by
USING v_lower_search_value1;
ELSIF UPPER(v_search_type_in) = 'BILLINGADDRESS1'
THEN
v_upper_search_value1 := UPPER(v_search_value1_in);
v_sql_from := v_sql_from || ' ,order_payment op '
|| ' ,credit_card cc '
|| ' ,om_address oma '
v_sql_where := v_sql_where || ' ' || v_group_where
|| 'AND po.order_id = op.business_object_id '
|| 'AND op.business_object_type = ''ORDR'' '
|| 'AND op.payment_method = ''CRCD'' '
|| 'AND op.payment_method_id = cc.credit_card_id '
|| 'AND cc.address_id = oma.address_id '
|| 'AND UPPER(oma.address1) LIKE ''%'' || :v_upper_search_value1 || ''%'' '
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT ' || v_sql_select || v_sql_from || v_sql_where || v_sql_order_by
USING v_upper_search_value1;
ELSIF UPPER(v_search_type_in) = 'SHIPPINGADDRESS1'
THEN
v_upper_search_value1 := UPPER(v_search_value1_in);
v_sql_from := v_sql_from || ' ,shipping_info si '
|| ' ,om_address oma '
v_sql_where := v_sql_where || ' ' || v_group_where
|| 'AND po.order_id = si.order_id '
|| 'AND si.ship_to_address_id = oma.address_id '
|| 'AND UPPER(oma.address1) LIKE ''%'' || :v_upper_search_value1 || ''%'' '
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT ' || v_sql_select || v_sql_from || v_sql_where || v_sql_order_by
USING v_upper_search_value1;
ELSIF UPPER(v_search_type_in) = 'BILLINGPHONE'
THEN
v_sql_from := v_sql_from || ' ,order_payment op '
|| ' ,credit_card cc '
v_sql_where := v_sql_where || ' ' || v_group_where
|| 'AND po.order_id = op.business_object_id '
|| 'AND op.business_object_type = ''ORDR'' '
|| 'AND op.payment_method = ''CRCD'' '
|| 'AND op.payment_method_id = cc.credit_card_id '
|| 'AND cc.home_phone = :v_search_value1_in '
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT ' || v_sql_select || v_sql_from || v_sql_where || v_sql_order_by
USING v_search_value1_in;
ELSIF UPPER(v_search_type_in) = 'SHIPPINGPHONE'
THEN
v_sql_from := v_sql_from || ' ,shipping_info si '
v_sql_where := v_sql_where || ' ' || v_group_where
|| 'AND po.order_id = si.order_id '
|| 'AND si.ship_phone = :v_search_value1_in '
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT ' || v_sql_select || v_sql_from || v_sql_where || v_sql_order_by
USING v_search_value1_in;
ELSIF UPPER(v_search_type_in) = 'CREDITCARDNUMBER'
THEN
v_sql_from := v_sql_from || ' ,order_payment op '
|| ' ,credit_card cc '
v_sql_where := v_sql_where || ' ' || v_group_where
|| 'AND po.order_id = op.business_object_id '
|| 'AND op.business_object_type = ''ORDR'' '
|| 'AND op.payment_method = ''CRCD'' '
|| 'AND op.payment_method_id = cc.credit_card_id '
|| 'AND cc.credit_card_number = :v_search_value1_in '
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT ' || v_sql_select || v_sql_from || v_sql_where || v_sql_order_by
USING v_search_value1_in;
ELSIF UPPER(v_search_type_in) = 'PONUMBER'
THEN
v_sql_from := ' '
|| 'FROM ' || ' product_order_detail_actv_v pod ,' || SUBSTR(v_sql_from, 6);
v_sql_where := v_sql_where || v_group_where
|| 'AND pod.po_no = :v_search_value1_in '
|| 'AND po.order_id = pod.order_id '
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT /*+ ORDERED */ DISTINCT ' || v_sql_select || v_sql_from || v_sql_where
USING v_search_value1_in;
ELSIF UPPER(v_search_type_in) = 'USERASSIGNED'
THEN
IF v_search_value1_in = '0' -- 'Unassigned'
THEN
v_sql_where := v_sql_where || ' ' || v_group_where || ' ' || v_status_where
|| 'AND pog.unassigned_flag = ''Y'' '
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT ' || v_sql_select || v_sql_from || v_sql_where || v_sql_order_by
USING v_open_status, v_requested_status, v_cancelled_status, v_closed_status;
ELSE
v_sql_where := v_sql_where || ' ' || v_group_where || ' ' || v_status_where
|| 'AND pog.dn_employee_id = :v_search_value1_in '
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT ' || v_sql_select || v_sql_from || v_sql_where || v_sql_order_by
USING v_open_status, v_requested_status, v_cancelled_status, v_closed_status, v_search_value1_in;
END IF;
ELSIF UPPER(v_search_type_in) = 'ORDERDATE'
THEN
v_sql_where := v_sql_where || ' ' || v_group_where || ' ' || v_status_where
|| 'AND po.order_date BETWEEN TO_DATE( :v_search_value1_in, ''MON DD YYYY HH24:MI:SS'') AND TO_DATE( :v_search_value2_in ,''MON DD YYYY HH24:MI:SS'') '
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT ' || v_sql_select || v_sql_from || v_sql_where || v_sql_order_by
USING v_open_status, v_requested_status, v_cancelled_status, v_closed_status, v_search_value1_in, v_search_value2_in;
ELSIF UPPER(v_search_type_in) = 'PRINTJOB'
THEN
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT ' || v_sql_select
|| ' '
|| 'FROM product_order po '
|| ' ,bcf_print_jobs pj '
|| 'WHERE 1 = 1 '
|| 'AND pj.order_id = po.order_id '
|| 'AND pj.username = :v_search_value1_in '
|| 'AND pj.create_date = TO_DATE( :v_search_value2_in,''MON DD YYYY HH24:MI:SS'') '
|| v_sql_order_by
USING v_search_value1_in, v_search_value2_in;
ELSIF UPPER(v_search_type_in) = 'FULFILLMENTTYPE'
THEN
v_sql_from := v_sql_from || ' ,product_order_detail_actv_v pod ';
v_sql_where := v_sql_where || ' ' || v_group_where || ' ' || v_status_where
|| 'AND pod.order_id = po.order_id '
-- Because we have to drill down the the POD level
-- we now need to ensure the pod records match on group
|| 'AND pod.group_id = ' || v_group_for_search
-- We curr. have 3 fufillment types FC165, FC212, FCBABY
-- so substr on 1st char works for Garry
|| 'AND UPPER(SUBSTR(pod.fulfillment_type,1,1)) = UPPER(:v_search_value1_in) '
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT DISTINCT ' || v_sql_select || v_sql_from || v_sql_where || v_sql_order_by
USING v_open_status, v_requested_status, v_cancelled_status, v_closed_status, v_search_value1_in;
ELSIF UPPER(v_search_type_in) = 'INSUFFICIENTAUTHORIZATION'
THEN
v_sql_where := v_sql_where
|| 'AND bcf_get_authorization_amount(po.order_id) > 0'
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT ' || v_sql_select || v_sql_from || v_sql_where || v_sql_order_by;
END IF;
END order_search;
Thanks
V
Edited by: vishal patel on Oct 23, 2008 3:59 PM

PROCEDURE order_search
v_search_type_in IN VARCHAR2
,v_search_value1_in IN VARCHAR2 DEFAULT 'NONE'
,v_search_value2_in IN VARCHAR2 DEFAULT 'NONE'
,v_group_id_in IN bcf_groups.group_id%TYPE DEFAULT 0
,v_open_in IN NUMBER DEFAULT 0
,v_requested_in IN NUMBER DEFAULT 0
,v_cancelled_in IN NUMBER DEFAULT 0
,v_closed_in IN NUMBER DEFAULT 0
,v_employee_id_in IN sxweb00.customer.customer_id%TYPE DEFAULT 0
,outcursor IN OUT FulfillmentCurType
IS
v_status_code NUMBER;
v_upper_search_value1 VARCHAR2(500);
v_lower_search_value1 VARCHAR2(500);
v_open_status VARCHAR2(10);
v_closed_status VARCHAR2(10);
v_cancelled_status VARCHAR2(10);
v_requested_status VARCHAR2(10);
v_group_for_search bcf_groups.group_id%TYPE;
v_sql_select VARCHAR2(4000);
v_sql_from VARCHAR2(4000);
v_sql_where VARCHAR2(4000);
v_sql_order_by VARCHAR2(4000);
v_group_where VARCHAR2(100);
v_status_where VARCHAR2(500);
BEGIN
IF v_open_in = 1 THEN
v_open_status := 'OPEN';
END IF;
IF v_closed_in = 1 THEN
v_closed_status := 'CLOSED';
END IF;
IF v_cancelled_in = 1 THEN
v_cancelled_status := 'CANCELLED';
END IF;
IF v_requested_in = 1 THEN
v_requested_status := 'REQUESTED';
END IF;
IF UPPER(v_search_type_in) = 'GROUP'
THEN
v_group_for_search := v_search_value1_in;
ELSE
v_group_for_search := v_group_id_in;
END IF;
-- This is the select statement used for all search types
v_sql_select := ' '
|| 'po.order_id order_id '
|| ',decode('||v_group_id_in||',4,substr(bcf_locator.get_first_location(po.order_id,'||v_group_id_in||'),3),null) first_location '
|| ',TO_CHAR(po.order_date, ''mm/dd/yyyy'') order_date '
|| ',' || v_group_for_search || ' group_id '
|| ',TRIM(TO_CHAR(bcf_fulfillment.get_shipping_total(po.order_id,' || v_group_for_search || ') + bcf_fulfillment.get_tax_total(po.order_id,' || v_group_for_search || ') + bcf_fulfillment.get_subtotal(po.order_id,' || v_group_for_search || ') ,''$999,999,999,999,999,990.99'')) total '
|| ',bcf_fulfillment.get_billing_name (po.customer_id) billing_name '
|| ',bcf_fulfillment.get_open_and_assigned_count(po.order_id,' || v_group_for_search || ') open_and_assigned_count '
|| ',bcf_fulfillment.get_divisions(po.order_id,' || v_group_for_search || ') divisions '
|| ',bcf_fulfillment.get_division_count (po.order_id,' || v_group_for_search || ' ) division_count '
|| ',bcf_fulfillment.get_picker_list (po.order_id,' || v_group_for_search || ') picker_name '
|| ',bcf_fulfillment.get_picker_count (po.order_id,' || v_group_for_search || ') picker_count '
|| ',bcf_fulfillment.get_order_status(po.order_id,' || v_group_for_search || ') order_status '
|| ',po.customer_id customer_id '
-- IF there is only one unique picker then that means there are no unassigned or NULL pickers
-- therefore by default the checkbox should not be selected else the count picker_count is
-- 0 or > 1 meaning that at least one line item has an unassigned employee_id and by default
-- the checkbox should be selected
|| ',DECODE(bcf_fulfillment.get_picker_count(po.order_id,' || v_group_for_search || '),1 ,0,1) print_cb '
|| ',bcf_fulfillment.get_fulfillment_codes(po.order_id,' || v_group_for_search || ') fulfillment_types '
|| ',bcf_fulfillment.has_group_been_reassigned(po.order_id,' || v_group_for_search || ') group_reassigned_flag '
|| ',bcf_fulfillment.get_chain_codes(po.order_id,' || v_group_for_search || ') chain_codes '
|| ',po.status_id order_status_id '
|| ',bcf_fulfillment.get_viewed_by_picker_flag(po.order_id,' || v_group_for_search || ') viewed_by_picker_flag '
|| ',bcf_fulfillment.get_picker_list (po.order_id,' || v_group_for_search || ', ''N'') pickers_without_unassigned '
|| ',bcf_fulfillment.get_group_list (po.order_id) group_list '
|| ',bcf_fulfillment.get_line_item_count(po.order_id,' || v_group_for_search || ') line_item_count '
|| ',bcf_fulfillment.get_shipping_priority(po.order_id,' || v_group_for_search || ') shipping_priority'
-- Anna wants all users to know and always wants to know no matter what the status of the auth or order
|| ',(SELECT decode(count(*),0,''N'',''Y'') FROM bcf_payment WHERE ics_rflag = ''DAVSNO'' AND order_id = po.order_id AND status_code IN (''ATH2'',''FUL2'',''CPT0'',''CPT2'')) avs_failed'
|| ',trunc(po.order_date) date_for_sort'
-- When we need to look at all orders then the v_group_for_search will be zero i.e. customer service rep
IF v_group_for_search = 0 THEN
-- This is the core tables used by most search types
v_sql_from := ' '
|| 'FROM product_order po'
-- || ',bcf_lookup lu'
-- This is the core table join needed for most search types
v_sql_where := ' '
|| 'WHERE 1 = 1 '
-- No orders will be looked at for fulfillment purposes that occurred before the minimum
-- shipping cost functionality was added
-- || 'AND po.order_date >= lu.implement_date '
|| 'AND po.order_date >= (SELECT min(implement_date) FROM bcf_lookup) '
|| 'AND po.submitted_flag = 1 '
|| 'AND po.channel_code = ''BCF'' '
-- When we are looking at all orders then we are not going to restrict it by group
v_group_where := ' ';
-- This is used where the search type requires searching by the Open, Closed, and Cancelled status.
-- We are binding the three status variables so that they can be cached in Oracle and not need to be parsed after
-- the first search of a search type is done.
v_status_where := ' '
|| 'AND bcf_fulfillment.get_order_status(po.order_id,' || v_group_for_search|| ') '
|| 'IN (:v_open_status, :v_requested_status, :v_cancelled_status, :v_closed_status) '
ELSE
-- This is the core tables used by most search types
v_sql_from := ' '
|| 'FROM product_order po'
|| ',bcf_product_order_groups pog '
-- This is the core table join needed for most search types
v_sql_where := ' '
|| 'WHERE 1 = 1 '
|| 'AND po.order_id = pog.order_id '
|| 'AND po.channel_code = ''BCF'' '
-- This is used only where the search type requires searching by a group.
v_group_where := ' '
|| 'AND pog.group_id = ' || v_group_for_search
-- This is used where the search type requires searching by the Open, Closed, and Cancelled status.
-- We are binding the three status variables so that they can be cached in Oracle and not need to be parsed after
-- the first search of a search type is done.
v_status_where := ' '
|| 'AND pog.dn_status IN (:v_open_status, :v_requested_status, :v_cancelled_status, :v_closed_status) '
END IF;
-- If an employee_id is provided then we need to add in a where clause so that only orders that belong to that
-- employee are pulled
IF v_employee_id_in > 0
THEN
v_sql_where := v_sql_where
|| 'AND pog.dn_employee_id = ' || TO_CHAR(v_employee_id_in) || ' '
END IF;
IF v_group_id_in = get_group_fulfillment_center1
THEN
v_sql_order_by := 'ORDER BY '
|| 'bcf_fulfillment.get_division_count (po.order_id,' || v_group_for_search || ') '
|| ',bcf_fulfillment.get_divisions(po.order_id,' || v_group_for_search || ') '
|| ',po.order_id '
ELSIF v_group_id_in = c_GROUP_FULFILLMENT_CENTER_212
THEN
v_sql_order_by := 'ORDER BY '
|| 'bcf_fulfillment.get_shipping_priority(po.order_id,' || v_group_for_search || ') DESC'
|| ',TRUNC(po.order_date)'
|| ',bcf_fulfillment.get_line_item_count(po.order_id,' || v_group_for_search || ')'
|| ',decode('||v_group_id_in||',4,substr(bcf_locator.get_first_location(po.order_id,'||v_group_id_in||'),3),null)'
|| ',po.order_id'
ELSE
v_sql_order_by := 'ORDER BY '
|| ' bcf_fulfillment.get_shipping_priority(po.order_id,' || v_group_for_search || ') DESC'
|| ',chain_codes DESC'
|| ',po.order_id '
END IF;
IF UPPER(v_search_type_in) = 'ORDERNUMBER'
THEN
v_sql_where := v_sql_where || v_group_where
|| 'AND po.order_id = :v_search_value1_in '
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT ' || v_sql_select || v_sql_from || v_sql_where
USING v_search_value1_in;
ELSIF UPPER(v_search_type_in) = 'STATUSONLY'
THEN
v_sql_where := v_sql_where || v_group_where || v_status_where
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT ' || v_sql_select || v_sql_from || v_sql_where || v_sql_order_by
USING v_open_status, v_requested_status, v_cancelled_status, v_closed_status;
ELSIF UPPER(v_search_type_in) = 'BILLINGNAME'
THEN
v_upper_search_value1 := UPPER(v_search_value1_in);
v_sql_where := v_sql_where || ' ' || v_group_where
|| 'AND po.upper_billing_name LIKE ''%'' || :v_upper_search_value1 || ''%'' '
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT ' || v_sql_select || v_sql_from || v_sql_where || v_sql_order_by
USING v_upper_search_value1;
ELSIF UPPER(v_search_type_in) = 'GROUP'
THEN
IF v_search_value1_in = '0' -- Unassigned
THEN
v_sql_from := v_sql_from || ' ,product_order_detail_actv_v pod ';
v_sql_where := v_sql_where || ' ' || v_status_where
|| 'AND po.order_id = pod.order_id '
|| 'AND pod.group_id IS NULL '
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT DISTINCT ' || v_sql_select || v_sql_from || v_sql_where || v_sql_order_by
USING v_open_status, v_requested_status, v_cancelled_status, v_closed_status;
ELSE
v_sql_where := v_sql_where || ' ' || v_status_where
|| 'AND pog.group_id = :v_group_for_search '
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT ' || v_sql_select || v_sql_from || v_sql_where || v_sql_order_by
USING v_open_status, v_requested_status, v_cancelled_status, v_closed_status, v_group_for_search;
END IF;
ELSIF UPPER(v_search_type_in) = 'SHIPPINGNAME'
THEN
v_upper_search_value1 := UPPER(v_search_value1_in);
v_sql_where := v_sql_where || ' ' || v_group_where
|| 'AND po.upper_shipping_name LIKE ''%'' || :v_upper_search_value1 || ''%'' '
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT ' || v_sql_select || v_sql_from || v_sql_where || v_sql_order_by
USING v_upper_search_value1;
ELSIF UPPER(v_search_type_in) = 'USERNAME'
THEN
v_lower_search_value1 := LOWER(v_search_value1_in);
v_sql_from := v_sql_from || ' ,sxweb01.customer c ';
v_sql_where := v_sql_where || ' ' || v_group_where
|| 'AND po.customer_id = c.customer_id '
|| 'AND c.username LIKE ''%'' || :v_lower_search_value1 || ''%'' '
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT ' || v_sql_select || v_sql_from || v_sql_where || v_sql_order_by
USING v_lower_search_value1;
ELSIF UPPER(v_search_type_in) = 'BILLINGADDRESS1'
THEN
v_upper_search_value1 := UPPER(v_search_value1_in);
v_sql_from := v_sql_from || ' ,order_payment op '
|| ' ,credit_card cc '
|| ' ,om_address oma '
v_sql_where := v_sql_where || ' ' || v_group_where
|| 'AND po.order_id = op.business_object_id '
|| 'AND op.business_object_type = ''ORDR'' '
|| 'AND op.payment_method = ''CRCD'' '
|| 'AND op.payment_method_id = cc.credit_card_id '
|| 'AND cc.address_id = oma.address_id '
|| 'AND UPPER(oma.address1) LIKE ''%'' || :v_upper_search_value1 || ''%'' '
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT ' || v_sql_select || v_sql_from || v_sql_where || v_sql_order_by
USING v_upper_search_value1;
ELSIF UPPER(v_search_type_in) = 'SHIPPINGADDRESS1'
THEN
v_upper_search_value1 := UPPER(v_search_value1_in);
v_sql_from := v_sql_from || ' ,shipping_info si '
|| ' ,om_address oma '
v_sql_where := v_sql_where || ' ' || v_group_where
|| 'AND po.order_id = si.order_id '
|| 'AND si.ship_to_address_id = oma.address_id '
|| 'AND UPPER(oma.address1) LIKE ''%'' || :v_upper_search_value1 || ''%'' '
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT ' || v_sql_select || v_sql_from || v_sql_where || v_sql_order_by
USING v_upper_search_value1;
ELSIF UPPER(v_search_type_in) = 'BILLINGPHONE'
THEN
v_sql_from := v_sql_from || ' ,order_payment op '
|| ' ,credit_card cc '
v_sql_where := v_sql_where || ' ' || v_group_where
|| 'AND po.order_id = op.business_object_id '
|| 'AND op.business_object_type = ''ORDR'' '
|| 'AND op.payment_method = ''CRCD'' '
|| 'AND op.payment_method_id = cc.credit_card_id '
|| 'AND cc.home_phone = :v_search_value1_in '
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT ' || v_sql_select || v_sql_from || v_sql_where || v_sql_order_by
USING v_search_value1_in;
ELSIF UPPER(v_search_type_in) = 'SHIPPINGPHONE'
THEN
v_sql_from := v_sql_from || ' ,shipping_info si '
v_sql_where := v_sql_where || ' ' || v_group_where
|| 'AND po.order_id = si.order_id '
|| 'AND si.ship_phone = :v_search_value1_in '
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT ' || v_sql_select || v_sql_from || v_sql_where || v_sql_order_by
USING v_search_value1_in;
ELSIF UPPER(v_search_type_in) = 'CREDITCARDNUMBER'
THEN
v_sql_from := v_sql_from || ' ,order_payment op '
|| ' ,credit_card cc '
v_sql_where := v_sql_where || ' ' || v_group_where
|| 'AND po.order_id = op.business_object_id '
|| 'AND op.business_object_type = ''ORDR'' '
|| 'AND op.payment_method = ''CRCD'' '
|| 'AND op.payment_method_id = cc.credit_card_id '
|| 'AND cc.credit_card_number = :v_search_value1_in '
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT ' || v_sql_select || v_sql_from || v_sql_where || v_sql_order_by
USING v_search_value1_in;
ELSIF UPPER(v_search_type_in) = 'PONUMBER'
THEN
v_sql_from := ' '
|| 'FROM ' || ' product_order_detail_actv_v pod ,' || SUBSTR(v_sql_from, 6);
v_sql_where := v_sql_where || v_group_where
|| 'AND pod.po_no = :v_search_value1_in '
|| 'AND po.order_id = pod.order_id '
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT /*+ ORDERED */ DISTINCT ' || v_sql_select || v_sql_from || v_sql_where
USING v_search_value1_in;
ELSIF UPPER(v_search_type_in) = 'USERASSIGNED'
THEN
IF v_search_value1_in = '0' -- 'Unassigned'
THEN
v_sql_where := v_sql_where || ' ' || v_group_where || ' ' || v_status_where
|| 'AND pog.unassigned_flag = ''Y'' '
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT ' || v_sql_select || v_sql_from || v_sql_where || v_sql_order_by
USING v_open_status, v_requested_status, v_cancelled_status, v_closed_status;
ELSE
v_sql_where := v_sql_where || ' ' || v_group_where || ' ' || v_status_where
|| 'AND pog.dn_employee_id = :v_search_value1_in '
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT ' || v_sql_select || v_sql_from || v_sql_where || v_sql_order_by
USING v_open_status, v_requested_status, v_cancelled_status, v_closed_status, v_search_value1_in;
END IF;
ELSIF UPPER(v_search_type_in) = 'ORDERDATE'
THEN
v_sql_where := v_sql_where || ' ' || v_group_where || ' ' || v_status_where
|| 'AND po.order_date BETWEEN TO_DATE( :v_search_value1_in, ''MON DD YYYY HH24:MI:SS'') AND TO_DATE( :v_search_value2_in ,''MON DD YYYY HH24:MI:SS'') '
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT ' || v_sql_select || v_sql_from || v_sql_where || v_sql_order_by
USING v_open_status, v_requested_status, v_cancelled_status, v_closed_status, v_search_value1_in, v_search_value2_in;
ELSIF UPPER(v_search_type_in) = 'PRINTJOB'
THEN
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT ' || v_sql_select
|| ' '
|| 'FROM product_order po '
|| ' ,bcf_print_jobs pj '
|| 'WHERE 1 = 1 '
|| 'AND pj.order_id = po.order_id '
|| 'AND pj.username = :v_search_value1_in '
|| 'AND pj.create_date = TO_DATE( :v_search_value2_in,''MON DD YYYY HH24:MI:SS'') '
|| v_sql_order_by
USING v_search_value1_in, v_search_value2_in;
ELSIF UPPER(v_search_type_in) = 'FULFILLMENTTYPE'
THEN
v_sql_from := v_sql_from || ' ,product_order_detail_actv_v pod ';
v_sql_where := v_sql_where || ' ' || v_group_where || ' ' || v_status_where
|| 'AND pod.order_id = po.order_id '
-- Because we have to drill down the the POD level
-- we now need to ensure the pod records match on group
|| 'AND pod.group_id = ' || v_group_for_search
-- We curr. have 3 fufillment types FC165, FC212, FCBABY
-- so substr on 1st char works for Garry
|| 'AND UPPER(SUBSTR(pod.fulfillment_type,1,1)) = UPPER(:v_search_value1_in) '
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT DISTINCT ' || v_sql_select || v_sql_from || v_sql_where || v_sql_order_by
USING v_open_status, v_requested_status, v_cancelled_status, v_closed_status, v_search_value1_in;
ELSIF UPPER(v_search_type_in) = 'INSUFFICIENTAUTHORIZATION'
THEN
v_sql_where := v_sql_where
|| 'AND bcf_get_authorization_amount(po.order_id) > 0'
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT ' || v_sql_select || v_sql_from || v_sql_where || v_sql_order_by;
END IF;
END order_search;
--

Ajax Autocomplete Tabular does not work using apex_item.text in SQL Query.

Hello,
Is it possible to use the search function which is used in, Dennis Kubicek example, ENAME topic Ajax Autocomplete Tabular
in a sql query using apex_items?
Query line :
, apex_item.text(17,xp.part_nr,null,null,'onfocus="f_register(this);" autocomplete="off"') PART
At first I followed the example by adding 'onfocus="f_register(this);" autocomplete="off" in the element attributes in the report field.
This didn't work... so tried to add the it in the attirbutes parameter of the apex_item.
But this still doesn't work. No errors are given, it does not respond.
Could somebody please help me?
Thx!
Astrid

Well, I'm trying to take this one step further, but I seem to be having some difficulty.
I'm trying to make a Filter screen to create a dynamic where clause filter screen.
This is a page I made with Popup LOVS, just to show you my goal (now trying to use autofilters)
http://apex.oracle.com/pls/otn/f?p=29989:5
I have a table on my system that tells you where the field is, and I'm using that to get the table (didn't want to change the javascript, so I pass in a static value).
This is the javascript code I used
<pre>
<script language="JavaScript" type="text/javascript">
function f_register(p_this,p_name)
var p_registered = $x('P5_ITEM_ID').value;
var p_this_name = $x(p_this).id;
//alert(p_this_name);
if (p_registered != p_this_name)
register(p_this_name, "COSTING_M", p_name, "blue", "red");
$x('P5_ITEM_ID').value = p_this_name;
</script>
</pre>
This is my query
<pre>
select column_name || apex_item.hidden(1,column_name) Col_name,
apex_item.SELECT_LIST_FROM_lov(2,'=','OPERATOR') OPERATOR,
apex_item.text (3,
NULL,
20,
200,
'onfocus="f_register(this,''' || column_name || ''');" autocomplete="off"',
'f3_' || '#ROWNUM#',
NULL
) value,column_id
from user_tab_cols
where table_name = 'COSTING_M'
ORDER BY ROWNUM
</pre>
and here is my on-demand process
<pre>
declare
TYPE CurTyp IS REF CURSOR;
v_row varchar2(4000);
rec CurTyp;
V_TABLENAME NKW.UTFIELD_M.TABLE_NAME%TYPE;
begin
BEGIN
SELECT TABLENAME INTO V_TABLENAME
FROM NKW.UTFIELD_M
WHERE FIELD_NAME = :TF_SL_COLUMN;
EXCEPTION WHEN NO_DATA_FOUND THEN RETURN; END;
:TF_SL_SEARCH := replace(:TF_SL_SEARCH, '&','&');
:TF_SL_SEARCH := replace(:TF_SL_SEARCH, '<','<');
:TF_SL_SEARCH := replace(:TF_SL_SEARCH, '>','>');
:TF_SL_SEARCH := replace(:TF_SL_SEARCH, '"','"');
owa_util.mime_header('text/xml', FALSE);
htp.p('Cache-Control: no-cache');
htp.p('Pragma: no-cache');
owa_util.http_header_close;
htp.prn('<rowset>');
open rec for
'select distinct ' || :TF_SL_COLUMN || ' ' ||
'from NKW.' || V_TABLE_NAME || ' ' ||
'where '||:TF_SL_COLUMN||' like :1||''%'' ' ||
'and rownum < 100 ' ||
'order by '||:TF_SL_COLUMN
using :TF_SL_SEARCH;
loop
fetch rec into v_row;
exit when rec%NOTFOUND;
htp.prn('<row>' || htf.escape_sc(v_row) || '</row>');
end loop;
htp.prn('</rowset>');
end;
</PRE>
I made some slight mods to make the table dynamic from my source table (this is to grab master files when they exist and not to when they don't).
I get my select list, but it's blank on all fields, any suggestions?
thanks,
Scott

SQL Query in Cache

Similar Messages

Maybe you are looking for