SQL query problem while combining two values.
Hi,
I am having a table test with columns X and Y. X is not nullable where as Y is nullable.
I had a requirement where I have to get these two values seperated by '-' (Hyphen).
So I wrote the query like :
Select X||'-'|| Y from test.
But now Y is nullable. So I'm getting some values ended by hypen if y is null. So is there any way to append these two only if Y is present and not to join if Y is null or empty.
Help me out in resolving this issue.
Regards,
Venky.
There are several ways to avoid/remove that hypen
1. select RTRIM(X||'-'||Y,'-') from test
2. select X||decode(Y,null,null,'-'||Y) from test
HTH,
Mohana
Similar Messages
-
Problem while setting new value to entity object attribute in doDML meathod
Hi all,
I am overriding the entity objects doDML method for generating the value of Sequence Number just before insert .
For this puropose i am using doDML method. I am fetching the maximum value for the sequence number feild from the table by a prepared statement
and then incrementing that value by one.
protected void doDML(int operation, TransactionEvent e) {
if (operation == DML_INSERT) {
// code for getting the max+1 of sequence number before insert
//command executes.
try {
System.out.println("Inside doDML Method");
String sql =
"select nvl(max(seq_no),0)+1 from WF_LEAVE_HDR where org_unit_code = " +
this.getOrgUnitCode();
PreparedStatement pstmt =
getDBTransaction().createPreparedStatement(sql, 0);
ResultSet rs = pstmt.executeQuery();
rs.next();
Integer newSeqNo =rs.getInt(1); //(Number)rs.getString(0);
//this.setSeqNo(new Number(newSeqNo));
setAttributeInternal("SeqNo",new Number(newSeqNo));
System.out.println("Value of new seq no is -->>"+getSeqNo());
} catch (Exception excpt) {
System.out.println("Inside catch block ");
excpt.printStackTrace();
super.doDML(operation, e);
}i am getting the value correct by using the sql statement but while i am using setAttributeInternal("SeqNo",new Number(newSeqNo));
it is giving an error and value for new sequence no is not passed to the seq no feild of the entity object. I have tried this.setSeqNo(new Number(newSeqNo))
but it is also not wotrking .
Any one please help , I am using Jdeveloper 10.1.3
Thanks all in advance.iloveoracle,
Sigh... in addition to doing this in doDML (which Dimitar points out is the wrong place to do this)... you are making a huge huge mistake.
select nvl(max(seq_no),0)+1 from WF_LEAVE_HDRWhat happens when two people do this at around the same time? You don't do any locking, so you will get two rows with the same SeqNo. This is absolutely the wrong way of doing sequence numbers. The best way of doing this would be to use real sequence numbers (an Oracle sequence) and ignore the fact that there will be gaps. If you insist on using your approach, you MUST LOCK THE ENTIRE TABLE before you try to do your little max() + 1 trick, otherwise you run the very real risk of getting duplicate SeqNos. OK, I see that you are trying to do sequences by org_unit_code, so you don't have to lock the whole table, but you do have to have some way of holding a lock. You must also write some code to be able to handle an "unable to get the lock because someone else already holds it" type of situation.
<rant>
I have seen so many people try to do this little max() + 1 trick. It DOES NOT, WILL NOT work until you handle locking properly. One question that I often ask when I interview database developers is about generating "gapless" sequences; unless the job is for a brand-new-with-absolutely-no-experience trainee, answering "select max() + 1" without any mention of concurrency issues would be grounds for an immediate rejection of the candidate. Seriously. Have a run over to http://asktom.oracle.com and search for "gapless" if you'd like to see a more strongly worded rant.
</rant>
Bottom line, just use an Oracle sequence if it's at all possible; otherwise, be prepared to write some bunches of code to deal with locking.
John -
A challenging dynamic SQL query problem
hi All,
I have a very interesting problem at work:
We have this particular table defined as follows :
CREATE TABLE sales_data (
sales_id NUMBER,
sales_m01 NUMBER,
sales_m02 NUMBER,
sales_m03 NUMBER,
sales_m04 NUMBER,
sales_m05 NUMBER,
sales_m06 NUMBER,
sales_m07 NUMBER,
sales_m08 NUMBER,
sales_m09 NUMBER,
sales_m10 NUMBER,
sales_m11 NUMBER,
sales_m12 NUMBER,
sales_prior_yr NUMBER );
The columns 'sales_m01 ..... sales_m12' represents aggregated monthly sales, in which 'sales_m01' translates to 'sales for the month of january, january being the first month, 'sales_m02' sales for the month of february, and so on.
The problem I face is that we have a project which requires that a parameter be passed to a stored procedure which stands for the month number which is then used to build a SQL query with the following required field aggregations, which depends on the parameter passed :
Sample 1 : parameter input: 4
Dynamically-built SQL query should be :
SELECT
SUM(sales_m04) as CURRENT_SALES,
SUM(sales_m01+sales_m02+sales_m03+sales_m04) SALES_YTD
FROM
sales_data
WHERE
sales_id = '0599768';
Sample 2 : parameter input: 8
Dynamically-built SQL query should be :
SELECT
SUM(sales_m08) as CURRENT_SALES,
SUM(sales_m01+sales_m02+sales_m03+sales_m04+
sales_m05+sales_m06+sales_m07+sales_m08) SALES_YTD
FROM
sales_data
WHERE
sales_id = '0599768';
So in a sense, the contents of SUM(sales_m01 ....n) would vary depending on the parameter passed, which should be a number between 1 .. 12 which corresponds to a month, which in turn corresponds to an actual field range on the table itself. The resulting dynamic query should only aggregate those columns/fields in the table which falls within the range given by the input parameter and disregards all the remaining columns/fields.
Any solution is greatly appreciated.
Thanks.Hi another simpler approach is using decode
try like this
SQL> CREATE TABLE sales_data (
2 sales_id NUMBER,
3 sales_m01 NUMBER,
4 sales_m02 NUMBER,
5 sales_m03 NUMBER,
6 sales_m04 NUMBER,
7 sales_m05 NUMBER,
8 sales_m06 NUMBER,
9 sales_m07 NUMBER,
10 sales_m08 NUMBER,
11 sales_m09 NUMBER,
12 sales_m10 NUMBER,
13 sales_m11 NUMBER,
14 sales_m12 NUMBER,
15 sales_prior_yr NUMBER );
Table created.
SQL> select * from sales_data;
SALES_ID SALES_M01 SALES_M02 SALES_M03 SALES_M04 SALES_M05 SALES_M06 SALES_M07 SALES_M08 SALES_M09 SALES_M10 SALES_M11 SALES_M12 SALES_PRIOR_YR
1 124 123 145 146 124 126 178 189 456 235 234 789 19878
2 124 123 145 146 124 126 178 189 456 235 234 789 19878
1 100 200 300 400 500 150 250 350 450 550 600 700 10000
1 101 201 301 401 501 151 251 351 451 551 601 701 10000----now for your requirement. see below query if there is some problem then tell.
SQL> SELECT sum(sales_m&input_data), DECODE (&input_data,
2 1, SUM (sales_m01),
3 2, SUM (sales_m01 + sales_m02),
4 3, SUM (sales_m01 + sales_m02 + sales_m03),
5 4, SUM (sales_m01 + sales_m02 + sales_m03 + sales_m04),
6 5, SUM (sales_m01 + sales_m02 + sales_m03 + sales_m04 + sales_m05),
7 6, SUM (sales_m01 + sales_m02 + sales_m03 + sales_m04+sales_m05+sales_m06),
8 7, SUM (sales_m01 + sales_m02 + sales_m03 + sales_m04+sales_m05+sales_m06+sales_m07),
9 8, SUM (sales_m01 + sales_m02 + sales_m03 + sales_m04+sales_m05+sales_m06+sales_m07+sales_m08),
10 9, SUM (sales_m01 + sales_m02 + sales_m03 + sales_m04+sales_m05+sales_m06+sales_m07+sales_m08+sales_m09),
11 10,SUM (sales_m01 + sales_m02 + sales_m03 + sales_m04+sales_m05+sales_m06+sales_m07+sales_m08+sales_m09+sales_m10),
12 11,SUM (sales_m01 + sales_m02 + sales_m03 + sales_m04+sales_m05+sales_m06+sales_m07+sales_m08+sales_m09+sales_m10+sales_m11),
13 12,SUM (sales_m01 + sales_m02 + sales_m03 + sales_m04+sales_m05+sales_m06+sales_m07+sales_m08+sales_m09+sales_m10+sales_m11+sales_m12)
14 ) total
15 FROM sales_data
16 WHERE sales_id = 1;
Enter value for input_data: 08
Enter value for input_data: 08
old 1: SELECT sum(sales_m&input_data), DECODE (&input_data,
new 1: SELECT sum(sales_m08), DECODE (08,
SUM(SALES_M08) TOTAL
890 5663 -
PL/SQL function body returning SQL Query Problem
I have wandered around the forums and found quite a bit of helpful information that has gotten me to the point I am now at. Unfortuntely, PL/SQL is not my strongest point and I am getting an error when I attempt to run my report.
This is what I have for my package:
CREATE OR REPLACE PACKAGE LIB2.report_query
is
function create_report2(v1 IN varchar2) RETURN VARCHAR2;
end report_query;
CREATE OR REPLACE PACKAGE BODY LIB2.report_query
as
function create_report2(v1 in varchar2) return varchar2
is
l_vc_format HTMLDB_APPLICATION_GLOBAL.VC_ARR2 := HTMLDB_UTIL.STRING_TO_TABLE(v1);
l_format varchar2(255) := HTMLDB_UTIL.TABLE_TO_STRING(l_vc_format);
q1 varchar2(32767) := ' ';
begin
q1 :=
'select b.BOOK_ID, bk.book_id bkid, bkk.book_id bkkid, b.TITLE, b.SUBTITLE, b.SERIES, b.VOLUME, b.ISBN, f.FORMAT_RET, b.DESCRIPTION, .PUBLISHED,'
||'b.PURCHASED_FROM, b.COMMENTS, b.WEBSITE, c.LENGTH_MINS, stragg(p.last_name || '', '' || p.first_name) Author, '
||'stragg(p.person_id) person_id, '
||'pb.name PUBLISHER, decode(b.abridged, ''Y'',''Abridged'',''N'',''Unabridged'') Abridged,'
||'(nvl(d.disk01,0)+nvl(d.disk02,0)+nvl(d.disk03,0)+nvl(d.disk04,0)+nvl(d.disk05,0)+nvl(d.disk06,0)+nvl(d.disk07,0)+nvl(d.disk08,0)+'
||'nvl(d.disk09,0)+nvl(d.disk10,0)+nvl(d.disk11,0)+nvl(d.disk12,0)+nvl(d.disk13,0)+nvl(d.disk14,0)+nvl(d.disk15,0)+nvl(d.disk16,0)+nvl(d.disk17,0)+'
||'nvl(d.disk18,0)+nvl(d.disk19,0)+nvl(d.disk20,0)+nvl(d.disk21,0)+nvl(d.disk22,0)+nvl(d.disk23,0)+nvl(d.disk24,0)+nvl(d.disk25,0)+nvl(d.disk26,0)+'
||'nvl(d.disk27,0)+nvl(d.disk28,0)+nvl(d.disk29,0)+nvl(d.disk30,0)+nvl(d.disk31,0)+nvl(d.disk32,0)+nvl(d.disk33,0)+nvl(d.disk34,0)+nvl(d.disk35,0)+'
||'nvl(d.disk36,0)+nvl(d.disk37,0)+nvl(d.disk38,0)+nvl(d.disk39,0)+nvl(d.disk40,0)+nvl(d.disk41,0)+nvl(d.disk42,0)+nvl(d.disk43,0)+nvl(d.disk44,0)+'
||'nvl(d.disk45,0)+nvl(d.disk46,0)+nvl(d.disk47,0)+nvl(d.disk48,0)+nvl(d.disk49,0)+nvl(d.disk50,0)) total_tracks'
||'from book b, '
||'book bk,'
||'book bkk,'
||'person p,'
||'lkup_book_author la,'
||'lkup_book_publisher lp,'
||'lkup_book_format lkf,'
||'format f,'
||'publisher pb,'
||'conversion_info_audio c,'
||'lkup_book_disk_info d'
||'where b.book_id = la.book_id'
||'and b.book_id = bk.book_id'
||'and b.book_id = bkk.book_id'
||'and p.person_id = la.author_id'
||'and b.book_id = lp.book_id'
||'and b.book_id = c.book_id'
||'and b.book_id = d.book_id'
||'and b.book_id = lkf.book_id'
||'and lkf.format_id = f.format_id'
||'and pb.publisher_id(+) = lp.publisher_id'
||'and b.wishlist = ''N'''
||'and (upper(b.book_id) like ''%'' || upper(:P40_SEARCH) || ''%'''
||'or upper(b.title) like ''%'' || upper(:P40_SEARCH) || ''%'''
||'or upper(b.subtitle) like ''%'' || upper(:P40_SEARCH) || ''%'''
||'or upper(b.series) like ''%'' || upper(:P40_SEARCH) || ''%'''
||'or upper(b.volume) like ''%'' || upper(:P40_SEARCH) || ''%'''
||'or upper(b.isbn) like ''%'' || upper(:P40_SEARCH) || ''%'''
||'or upper(b.format) like ''%'' || upper(:P40_SEARCH) || ''%'''
||'or upper(b.description) like ''%'' || upper(:P40_SEARCH) || ''%'''
||'or upper(b.published) like ''%'' || upper(:P40_SEARCH) || ''%'''
||'or upper(b.purchased_from) like ''%'' || upper(:P40_SEARCH) || ''%'''
||'or upper(b.comments) like ''%'' || upper(:P40_SEARCH) || ''%'''
||'or upper(b.website) like ''%'' || upper(:P40_SEARCH) || ''%'''
||'or upper(p.last_name) like ''%'' || upper(:P40_SEARCH) || ''%'''
||'or upper(p.first_name) like ''%'' || upper(:P40_SEARCH) || ''%'''
||'or upper(pb.name) like ''%'' || upper(:P40_SEARCH) || ''%'''
||'or upper(:P40_SEARCH) is null)'
||'and ((upper(b.title) like ''%'' || upper(:P40_TITLE) || ''%'' or upper(:P40_TITLE) is null))'
||'and ((upper(b.series) like ''%'' || upper(:P40_SERIES) || ''%'' or upper(:P40_SERIES) is null))'
||'and ((upper(p.last_name) like ''%'' || upper(:P40_LASTNAME) || ''%'' or upper(:P40_LASTNAME) is null))'
||'and ((upper(p.first_name) like ''%'' || upper(:P40_FIRSTNAME) || ''%'' or upper(:P40_FIRSTNAME) is null))'
||'and ((upper(f.format_ret) in (upper(l_vc_format)) or upper(:P40_FORMAT) is null))'
||'group by b.BOOK_ID, bk.book_id, bkk.book_id, b.TITLE, b.SUBTITLE, b.SERIES, b.VOLUME, b.ISBN, f.FORMAT_ret, b.DESCRIPTION, '
||'b.PUBLISHED, b.PURCHASED_FROM, b.COMMENTS, b.WEBSITE, c.LENGTH_MINS, pb.name, b.abridged, '
||'(nvl(d.disk01,0)+nvl(d.disk02,0)+nvl(d.disk03,0)+nvl(d.disk04,0)+nvl(d.disk05,0)+nvl(d.disk06,0)+nvl(d.disk07,0)+nvl(d.disk08,0)+'
||'nvl(d.disk09,0)+nvl(d.disk10,0)+nvl(d.disk11,0)+nvl(d.disk12,0)+nvl(d.disk13,0)+nvl(d.disk14,0)+nvl(d.disk15,0)+nvl(d.disk16,0)+nvl(d.disk17,0)+'
||'nvl(d.disk18,0)+nvl(d.disk19,0)+nvl(d.disk20,0)+nvl(d.disk21,0)+nvl(d.disk22,0)+nvl(d.disk23,0)+nvl(d.disk24,0)+nvl(d.disk25,0)+nvl(d.disk26,0)+'
||'nvl(d.disk27,0)+nvl(d.disk28,0)+nvl(d.disk29,0)+nvl(d.disk30,0)+nvl(d.disk31,0)+nvl(d.disk32,0)+nvl(d.disk33,0)+nvl(d.disk34,0)+nvl(d.disk35,0)+'
||'nvl(d.disk36,0)+nvl(d.disk37,0)+nvl(d.disk38,0)+nvl(d.disk39,0)+nvl(d.disk40,0)+nvl(d.disk41,0)+nvl(d.disk42,0)+nvl(d.disk43,0)+nvl(d.disk44,0)+'
||'nvl(d.disk45,0)+nvl(d.disk46,0)+nvl(d.disk47,0)+nvl(d.disk48,0)+nvl(d.disk49,0)+nvl(d.disk50,0))';
RETURN q1;
EXCEPTION
WHEN OTHERS THEN
RETURN q1;
end create_report2;
end;
And here is what I have for my Region Source on my report:
return lib2.report_query.create_report2(v('P40_FORMAT'));
Here is my error when I run the page:
failed to parse SQL query:
ORA-00936: missing expression
I have tried the region source line in many variations, this is just my latest one. None of them have worked. I am quite obviously missing something quite important and probably extremely silly. Any ideas?
Thanks!
ChrissyChrissy,
This is what the package returns as a query:
select b.BOOK_ID, bk.book_id bkid, bkk.book_id bkkid,
b.TITLE, b.SUBTITLE, b.SERIES, b.VOLUME, b.ISBN, f.FORMAT_RET,
b.DESCRIPTION, .PUBLISHED,b.PURCHASED_FROM, b.COMMENTS, b.WEBSITE,
c.LENGTH_MINS, stragg(p.last_name || ', ' || p.first_name) Author,
stragg(p.person_id) person_id, pb.name PUBLISHER, decode(b.abridged,
'Y','Abridged','N','Unabridged') Abridged,
(nvl(d.disk01,0)+nvl(d.disk02,0)+nvl(d.disk03,0)+nvl(d.disk04,0)+nvl(d.disk05,0)
nvl(d.disk06,0)nvl(d.disk07,0)+nvl(d.disk08,0)+nvl(d.disk09,0)+nvl(d.disk10,0)
nvl(d.disk11,0)nvl(d.disk12,0)+nvl(d.disk13,0)+nvl(d.disk14,0)+nvl(d.disk15,0)
nvl(d.disk16,0)nvl(d.disk17,0)+nvl(d.disk18,0)+nvl(d.disk19,0)+nvl(d.disk20,0)
nvl(d.disk21,0)nvl(d.disk22,0)+nvl(d.disk23,0)+nvl(d.disk24,0)+nvl(d.disk25,0)
nvl(d.disk26,0)nvl(d.disk27,0)+nvl(d.disk28,0)+nvl(d.disk29,0)+nvl(d.disk30,0)
nvl(d.disk31,0)nvl(d.disk32,0)+nvl(d.disk33,0)+nvl(d.disk34,0)+nvl(d.disk35,0)
nvl(d.disk36,0)nvl(d.disk37,0)+nvl(d.disk38,0)+nvl(d.disk39,0)+nvl(d.disk40,0)
nvl(d.disk41,0)nvl(d.disk42,0)+nvl(d.disk43,0)+nvl(d.disk44,0)+nvl(d.disk45,0)
nvl(d.disk46,0)nvl(d.disk47,0)+nvl(d.disk48,0)+nvl(d.disk49,0)+nvl(d.disk50,0)) total_tracksfrom book b,
book bk,book bkk,person p,lkup_book_author la,lkup_book_publisher lp,
lkup_book_format lkf,format f,publisher pb,conversion_info_audio c,
lkup_book_disk_info dwhere b.book_id = la.book_idand b.book_id = bk.book_idand b.book_id = bkk.book_idand p.person_id = la.author_idand
b.book_id = lp.book_idand b.book_id = c.book_idand b.book_id = d.book_idand
b.book_id = lkf.book_idand lkf.format_id = f.format_idand pb.publisher_id(+) = lp.publisher_idand
b.wishlist = 'N'and (upper(b.book_id) like '%' || upper(:P40_SEARCH) || '%'
or upper(b.title) like '%' || upper(:P40_SEARCH) || '%'or upper(b.subtitle) like '%' ||
upper(:P40_SEARCH) || '%'or upper(b.series) like '%' || upper(:P40_SEARCH) || '%'or
upper(b.volume) like '%' || upper(:P40_SEARCH) || '%'or upper(b.isbn) like '%' ||
upper(:P40_SEARCH) || '%'or upper(b.format) like '%' || upper(:P40_SEARCH) || '%'or upper(b.description) like '%' || upper(:P40_SEARCH) || '%'or upper(b.published)
like '%' || upper(:P40_SEARCH) || '%'or upper(b.purchased_from) like '%' ||
upper(:P40_SEARCH) || '%'or upper(b.comments) like '%' || upper(:P40_SEARCH)
|| '%'or upper(b.website) like '%' || upper(:P40_SEARCH) || '%'or
upper(p.last_name) like '%' || upper(:P40_SEARCH) || '%'or upper(p.first_name)
like '%' || upper(:P40_SEARCH) || '%'or upper(pb.name) like '%' ||
upper(:P40_SEARCH) || '%'or upper(:P40_SEARCH) is null)and
((upper(b.title) like '%' || upper(:P40_TITLE) || '%' or
upper(:P40_TITLE) is null))and ((upper(b.series) like '%' ||
upper(:P40_SERIES) || '%' or upper(:P40_SERIES) is null))and
((upper(p.last_name) like '%' || upper(:P40_LASTNAME) || '%' or
upper(:P40_LASTNAME) is null))and ((upper(p.first_name) like '%' ||
upper(:P40_FIRSTNAME) || '%' or upper(:P40_FIRSTNAME) is null))and
((upper(f.format_ret) in (upper(l_vc_format)) or upper(:P40_FORMAT) is null))
group by b.BOOK_ID, bk.book_id, bkk.book_id, b.TITLE, b.SUBTITLE, b.SERIES, b.VOLUME,
b.ISBN, f.FORMAT_ret, b.DESCRIPTION, b.PUBLISHED, b.PURCHASED_FROM, b.COMMENTS, b.WEBSITE,
c.LENGTH_MINS, pb.name, b.abridged, (nvl(d.disk01,0)+nvl(d.disk02,0)+nvl(d.disk03,0)
nvl(d.disk04,0)nvl(d.disk05,0)+nvl(d.disk06,0)+nvl(d.disk07,0)+nvl(d.disk08,0)
nvl(d.disk09,0)nvl(d.disk10,0)+nvl(d.disk11,0)+nvl(d.disk12,0)+nvl(d.disk13,0)
nvl(d.disk14,0)nvl(d.disk15,0)+nvl(d.disk16,0)+nvl(d.disk17,0)+nvl(d.disk18,0)
nvl(d.disk19,0)nvl(d.disk20,0)+nvl(d.disk21,0)+nvl(d.disk22,0)+nvl(d.disk23,0)
nvl(d.disk24,0)nvl(d.disk25,0)+nvl(d.disk26,0)+nvl(d.disk27,0)+nvl(d.disk28,0)
nvl(d.disk29,0)nvl(d.disk30,0)+nvl(d.disk31,0)+nvl(d.disk32,0)+nvl(d.disk33,0)
nvl(d.disk34,0)nvl(d.disk35,0)+nvl(d.disk36,0)+nvl(d.disk37,0)+nvl(d.disk38,0)
nvl(d.disk39,0)nvl(d.disk40,0)+nvl(d.disk41,0)+nvl(d.disk42,0)+nvl(d.disk43,0)
nvl(d.disk44,0)nvl(d.disk45,0)+nvl(d.disk46,0)+nvl(d.disk47,0)+nvl(d.disk48,0)
nvl(d.disk49,0)nvl(d.disk50,0))
This query will never work. I marked only couple of errors you have there. Actually,
I meant "formating" errors rather than "syntactical" errors. You are missing spaces
all over the place. This is why I suggested to use a CLOB column in a test table
to return the query for debugging purposes - this is how I do it at least, when I need
to escape and concatenate a lot of code.
If you are referencing item values from a user session in a function or a procedure,
then you need to use the v('ITEM') syntax instead of :ITEM syntax. However, if the
output of this procedure will be used as a function returning SQL query, you will
be fine with :ITEM.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://htmldb.oracle.com/pls/otn/f?p=31517:1
------------------------------------------------------------------- -
SQL query problem - select max (case... aggregate function)
Hi,
I have a problem with below sql query, it gives me problem/error message 'ORA-00937: not a single-group group function', why?
select sag.afdeling, sag.sagsnr, to_char(sag.start_dato, 'yyyy-mm-dd'), sag.stat, BOGF_TRANS.TRANSTYPE,
max (case when BOGF_TRANS.TRANSTYPE = 'K' then sum(bogf_trans.belobdkk) end) + -- as "TRANSTYPE K",
max (case when BOGF_TRANS.TRANSTYPE = 'D' then sum(bogf_trans.belobdkk) end) as "TRANSTYPE K & D",
max (case when BOGF_TRANS.TRANSTYPE = 'S' then sum(bogf_trans.belobdkk) end) as "SUM TRANSTYPE S"
from sag
join bogf_trans on sag.selskab = bogf_trans.selskab and sag.sagsnr = bogf_trans.sagsnr and sag.afdeling = bogf_trans.afdeling
where SAG.SELSKAB=37 and SAG.AFDELING = 'SUS' AND SAG.SAGSNR = 10876
group by sag.afdeling, sag.sagsnr, sag.start_dato, sag.stat, BOGF_TRANS.TRANSTYPE
If I exclude (columns) as below it give me correct summations (max (case... sum(...)) but then I miss some important info that I need
select
max (case when BOGF_TRANS.TRANSTYPE = 'K' then sum(bogf_trans.belobdkk) end) + -- as "TRANSTYPE K",
max (case when BOGF_TRANS.TRANSTYPE = 'D' then sum(bogf_trans.belobdkk) end) as "TRANSTYPE K & D",
max (case when BOGF_TRANS.TRANSTYPE = 'S' then sum(bogf_trans.belobdkk) end) as "SUM TRANSTYPE S"
from sag
join bogf_trans on sag.selskab = bogf_trans.selskab and sag.sagsnr = bogf_trans.sagsnr and sag.afdeling = bogf_trans.afdeling
where SAG.SELSKAB=37 and SAG.AFDELING = 'SUS' AND SAG.SAGSNR = 10876
group by sag.afdeling, sag.sagsnr, sag.start_dato, sag.stat, BOGF_TRANS.TRANSTYPE
Any ideas?Moved to more sutable forum, sorry.
-
Creating an SQL Query for Project Custom Fields Values
Hello:
I'm currently trying to create an SQL Query to show all of the server's Project Custom Fields Values, along with the modification date.
So far, I've managed to display correctly all of the data for all of the Projects' text value Custom Fields (those not based on a LookUp Table) with this query:
SELECT
MSP_PROJECTS.PROJ_NAME,
MSP_CUSTOM_FIELDS.MD_PROP_NAME,
MSP_PROJ_CUSTOM_FIELD_VALUES.CODE_VALUE,
MSP_PROJ_CUSTOM_FIELD_VALUES.TEXT_VALUE,
MSP_PROJ_CUSTOM_FIELD_VALUES.MOD_DATE
FROM
MSP_PROJ_CUSTOM_FIELD_VALUES
INNER JOIN
MSP_CUSTOM_FIELDS
ON MSP_CUSTOM_FIELDS.MD_PROP_UID = MSP_PROJ_CUSTOM_FIELD_VALUES.MD_PROP_UID
INNER JOIN
MSP_PROJECTS
ON MSP_PROJECTS.PROJ_UID = MSP_PROJ_CUSTOM_FIELD_VALUES.PROJ_UID
WHERE
MSP_PROJ_CUSTOM_FIELD_VALUES.CODE_VALUE IS NULL
ORDER BY
MSP_PROJ_CUSTOM_FIELD_VALUES.PROJ_UID,
MSP_PROJ_CUSTOM_FIELD_VALUES.MD_PROP_UID
However, when I try a new Query to obtain the actual values for the Projects Custom Fields that do use a LookUp Table, I can't seem to find what table in the model I'm supposed to link to the MSP_PROJ_CUSTOM_FIELD_VALUES.CODE_VALUE field (the TEXT_VALUE
field has NULL value when CODE_VALUE field isn't NULL)
Any suggestions on how to obtain the actual Projects' custom fields values instead of the Code Value, for Metadata that do use a LookUp Table?
Also, I'm able to run this query only in the Published Database, since the MSP_CUSTOM_FIELDS table is empy in the Draft Database. Why is that?
Awaiting your kind reply,
Sebastián Armas PMO Project ManagerHi Sebastián, rather than directly accessing the database it would be better to use the PSI to get this data. Take a look at the ProjTool sample in the SDK whcih gets this data.
Best regards,
Brian.
Blog |
Facebook | Twitter | Posting is provided "AS IS" with no warranties, and confers no rights.
Project Server TechCenter |
Project Developer Center |
Project Server Help | Project Product Page -
Hi,
I have a search form with 1 field (date picker) - the user chooses a date and a report based on a sql query is shown.
I want the report to be based on only the month and year, and not the particular day.
If there is a date picker (or something similar) for only month and/or year, then I can change my form, but I don't see this option.
So, I'm trying to write my query to ignore the Day portion in the search form and just do a search based on the month and year, but i'm having trouble with this.
This is my query...
select d.dept, count(e.emp_id) "No. of Employees"
from dept d, employees e
where e.date_created = trunc(:P13_DATE, 'MONTH YYYY')
and d.dept_id = e.dept_id
group by dept
order by dept
How do I write the where clause so that the search is done only on month and year?
Or otherwise, how can I change the search form to exclude the day from the date?
Thanks.Hi,
Oh, the invalid number is the result of :P13_DATE being a string value. all item values are actually strings (or varchar2 if you like) when you referencing them with ':Px_ITEM' format. With the pl/sql function there are 2 possible ways to reference item, namely the function: V('Px_ITEM') and NV('Px_ITEM'). Although in SQL varchar2 => number conversion can be dealed with by the SQL engine.
Unfortunally there is no pl/sql method for getting a DATE of an date-picker item (based on its format mask etc.). Patrick Wolf has added this function in his ApExLib framework, function DV. I find this a nice extension. -
Sql query slow while using poc *C, OCI
Sql query is taking long time while using fetching records from RAC using Pro *C, OCI. Same query working fine while using JDBC connection.what could be the issue.Please help
Thanks,
SamPro*C is not part of Oracle Solaris Studio (formerly Sun Studio). Studio has no special support for database programming. You are more likely to get a helpful answer in a database programming forum. Start here:
https://forums.oracle.com/forums/category.jspa?categoryID=18 -
Hello Friends,
I have a problem while executing a query.
When I run any query from any role, by default it is opening other working workbook.
After the refresh also, it is not doing anything, still shows the same workbook results.
It is displaying the underneath query as query from the above workbook only.
Same query from a workbooks Role works okay, but when I run the same query from querys role, it is causing this kind of strange behavior.
Can someone please help me?
Thanks
PriyaHi Bhanu
I think, that could be the problem.I have created a Z program and assigned a default template for all queries, before I could verified your solution.
By the time, I checked it from the settings, it is already showing the default template which I have assigned.
The issue is fixed now.
Thanks
Priya -
SQL Query to get Date Range Values
Hi,
The database is Oracle11i.
I am looking for a way to generate list of dates from a fixed date in the past (could be hardcoded) to current day (sysdate).
That is, if the fixed date is 19 June 2011 and assuming that today is 24 June 2011 the SQL should be able to generate the
following:-
19-June-2011
20-June-2011
21-June-2011
22-June-2011
23-June-2011
24-June-2011
And the constraint is that I can't make any change to the database in question. I can only fire an SQL query (SELECT). No
usage of time dimension kind of approach (time dimension is not available here) and no procedures, PL/SQL etc. Is there any way?
ThanksJaimeen Shah wrote:
Hi,
The database is Oracle11i.
I am looking for a way to generate list of dates from a fixed date in the past (could be hardcoded) to current day (sysdate).
That is, if the fixed date is 19 June 2011 and assuming that today is 24 June 2011 the SQL should be able to generate the
following:-
19-June-2011
20-June-2011
21-June-2011
22-June-2011
23-June-2011
24-June-2011
And the constraint is that I can't make any change to the database in question. I can only fire an SQL query (SELECT). No
usage of time dimension kind of approach (time dimension is not available here) and no procedures, PL/SQL etc. Is there any way?
Thanks
SQL> def date_start = '13/11/2010'
SQL> def date_end = '22/11/2010'
SQL> with
2 data as (
3 select to_date('&date_start', 'DD/MM/YYYY') date1,
4 to_date('&date_end', 'DD/MM/YYYY') date2
5 from dual
6 )
7 select to_char(date1+level-1, 'DD/MM/YYYY') the_date
8 from data
9 connect by level <= date2-date1+1
10 /
THE_DATE
13/11/2010
14/11/2010
15/11/2010
16/11/2010
17/11/2010
18/11/2010
19/11/2010
20/11/2010
21/11/2010
22/11/2010 -
Sql query - been trying for two days
Hi guys im trying to carry out an sql query
Im using a left join to do a query, which gives me a set of results:
select COURSESTUDENT.StudentNo, COURSESTUDENT.CourseCode, COURSESTUDENT.Year, MARKS.ExamMark, MARKS.EntryNo FROM COURSESTUDENT LEFT JOIN MARKS ON COURSESTUDENT.StudentNo=MARKS.StudentNo AND COURSESTUDENT.CourseCode=MARKS.CourseCode AND COURSESTUDENT.Year=MARKS.Year
but I would like to do a select on this result but do not want to use a create view as if more than one person access this page at a time then if the servlet tries to create the view an error will occur.
I would like to do the following select statement on the results of the query above..
select * from (above) where CourseCode='ELE304' AND Year=1999;
Is this possible, im using postgres..
Please help......
thanks
tzafjust add "where ..." to the end of the first query.
-
SQL query problem with sorting
Hi,
I have question regarding sql query . Right now I am getting the results like this if i use this sql query
select ID,Name,Desc,Priority from emp order by Priority ;
Priority is varchar field. I don't want to change the Priority field and cannot add a new column in the table. Because i don't have permission to do that.
ID Name Desc Priority
=============================================
234 paul paul desc Highest
3452 mike mike desc High
4342 smith smith desc Low
6565 kelly kelly desc Low
9878 nate nate desc Medium
3223 deb deb desc High
============================================
I need a query to get the results like that.
ID Name Desc Priority
=============================================
234 paul paul desc Highest
3452 mike mike desc High
3223 deb deb desc High
9878 nate nate desc Medium
4342 smith smith desc Low
6565 kelly kelly desc Low
============================================
If any one knows about this one, please let me know.
Thanks,
BalaYou are aware that there are differences in the SQL implementation between Sqlserver and Oracle? You could try something like this, if there's a INSTR function:
ORDER BY INSTR('Highest,High,Medium,Low,', Priority || ',')You may have to change the "Priority || ," to a "Priority + ','), if string concatenation is done differently in sqlserver. Don't know about the ('), maybe you need (").
C. -
Enable SQL Query logging while generating a report
I am a newbie to BI Publisher. We are using Oracle BI Publisher 11.1.1.5.0 for reports generation.
I am trying to get the actual SQL query executed when a report is generated.
It would be great if any one can share some tips to enable SQL query logging and how to verify it.
Thanks,
SatyaThanks for your response.
It seems the NQQuery.log is for OBIEE not for BI Publisher. I could see the admin guide refers to Oracle Fusion Middleware System Administrator's Guide for Oracle Business Intelligence Enterprise Edition.
I raised an SR at myoraclesupport (MOS), I got a response saying enable SQL query log option is not available in BIP.
Best regards,
Satya -
SQL Query CASE statement using two fields
Hi,
I have two fields. One is called rescategory1, the other is called rescategory2.
I'm not sure if its a CASE statement I need or some sort of WHERE clause but I want to create a query that does the following or something similar:
CASE rescategory2
WHEN rescategory1 = '44' AND rescategory2 = '1' THEN 'Backup'
WHEN rescategory1 = '44' AND rescategory2 = '2' THEN 'Hardware'
END AS [Resolution Sub Category]
Basically, I'm looking to give rescategory2 a value based on that of rescategory1 and rescategory2 combined.
How do I write this?
Cheers
Pauldo you mean this?
rescategory2 = CASE
WHEN rescategory1 = '44' AND rescategory2 = '1' THEN 'Backup'
WHEN rescategory1 = '44' AND rescategory2 = '2' THEN 'Hardware'
END
ie assigning value for rescategory2
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs -
SQL query problem using analytical/report function
Hello there,
I am having some problem writing my query. I have this table below:
create table t (priority number,
plannedamount number,
availablepieces number,
material_id varchar2(20))
insert into t values (1, 15, 30, 'A');
insert into t values (2, 20, 30, 'A');
insert into t values (3, 5, 30, 'A');
insert into t values (4, 8, 30, 'A');
insert into t values (5, 4, 30, 'A');
insert into t values (1, 2, 10, 'B'); PRIORITY| PLANNED AMOUNT|AVAILABLE PIECES | MATERIAL_ID
1 15 30 A
2 20 30 A
3 5 30 A
4 8 30 A
5 4 30 A
1 2 30 B .
Each line is a customer order ordering a material. I am grouping by material and ordering it by priority. I want to display a new column called pieces not reserved yet. This column will show that if the order can be fully reserved for that current order ordering by priority.
If the row can be reserved it will substract and bring it to the next row. If it cannot the pieces not reserved will remain the same.
I've tried using sum(), lead(), first(), lag(), etc but I still cannot get the correct result.
PRIORITY| PLANNED AMOUNT|PIECES NOT RESERVED YET | MATERIAL_ID
1 15 30 A
2 20 15 A
3 5 15 A
4 8 10 A
5 4 2 A
1 2 30 B
Can anyone elaborate or have any hints on what method to use to create this column?
Thanks. .
Edited by: 998373 on Apr 5, 2013 11:42 AM
Edited by: 998373 on Apr 5, 2013 11:43 AMFrom 10.x on
with t(PRIORITY, PLANNED_AMOUNT,AVAILABLE_PIECES , MATERIAL_ID) as
select 1, 15, 30, 'A' from dual union all
select 2, 20, 30, 'A' from dual union all
select 3, 5, 30, 'A' from dual union all
select 4, 8, 30, 'A' from dual union all
select 5, 4, 30, 'A' from dual union all
select 1, 2, 30, 'B' from dual
select
MATERIAL_ID
, PRIORITY
, PLANNED_AMOUNT
, AVAILABLE_PIECES PIECES_NOT_RESERVED_YET
from t
model
partition by (material_id)
dimension by (PRIORITY)
measures (
PLANNED_AMOUNT
, AVAILABLE_PIECES
rules (
AVAILABLE_PIECES[priority>1] order by priority=
case when PLANNED_AMOUNT[cv()-1] <= AVAILABLE_PIECES[cv()-1]
then AVAILABLE_PIECES[cv()-1] - PLANNED_AMOUNT[cv()-1]
else AVAILABLE_PIECES[cv()-1]
end
MATERIAL_ID PRIORITY PLANNED_AMOUNT PIECES_NOT_RESERVED_YET
A 1 15 30
A 2 20 15
A 3 5 15
A 4 8 10
A 5 4 2
B 1 2 30
Maybe you are looking for
-
SOAP Receiver Adapter Error in XI RWB - java.lang.NULLPointerException
Hi, We have a asynchronous scenario in SAP-XI, where we are sending the PO data from SRM to third party (Hubspan / TNT). Proxy is being used at Sender side and SOAP Adapter is used for Receiver Communication Channel. u2022SRM is sending around 1000 m
-
Drag & Drop, ALV or Table Control to Tree Control
Hi Experts, If i want Drag & Drop feature in ALV or Table Control to Tree Control
-
Two actions in the same button
Hi. I have a button witch tells a movie clip, that is loaded on an empty movie clip on stage (handler) with attachMovie, to play frame 101 (it leaves the stage). How can I tell the same button, at the same action (onRelease) to attach another movie c
-
Hey there, Just got a 2011 brand new 27 incgh imac with full ram/ full processing speed. I am using after effects and premiere to edit a project. I am currently experiencing over the top crash issues/ slow rendering/ general reas issues when I attemp
-
WiFi shuts down when display goes to sleep
Often when my display goes to sleep, my wifi disconnects. As soon as move the mouse or press a button, the screen goes on, the wifi reconnects. This is specially annoying when I'm using the Boxee streaming to my Boxee box, suddenly the stream stops a