SQL Server 2008 R2 Backup jobs are failing
I have a problem with SQL Server 2008 R2. First the management studio package is failing to load. backup jobs on that server are failing to run. The server won't accept any installation. The Installation of .Net Framework failed, the Installation of SQL
server 2008 R2 SP2 also failed, Trying to repair SQL Server through the CD also failed. Actually the server cannot install anything on it. When you try to initiate the installation it comes back and say check online for solution or close the program.
I am desperate here as I cannot backup
When you try to initiate the installation it comes back and say check online for solution or close the program.
Are you sure this is the error, I updated SP2 last week and I got the same message but if I remember correctly there was a continue button as well. Could you post the errors.
SP2 not installing, .net framework not installing, ssms not loading up and backups not running all could be due to different issues. Consider these as different and post error message that you are receiving for the issue which is most important for you.
Regards, Ashwin Menon My Blog - http:\\sqllearnings.com
Similar Messages
-
MS SQL Server 2008 -- Daily Backup
Hello,
My real need is simply to do a daily backup of a database : I have SQL Server 2008
( not express ) .
My user is sa and has full control on the database.
I have searched the web and found many places where they say to do a Task -> Backup and then click on "script action to job". This option is greyed out ( and it is NOT express) and I am using the sa
user will FULL privileges.
I read here ( http://social.msdn.microsoft.com/Forums/sqlserver/en-US/4c5b5ff3-f2cd-4439-b878-de0891a5eedf/sql-server-management-studio-express-script-action-to-job-grayed-out?forum=sqldatabaseengine ) that I may need to "Install
Integration Services" .
However, when I go to do this (
http://msdn.microsoft.com/en-us/library/ms143731(v=sql.105).aspx ) , I read:
You can install SQL Server Integration Services on a computer that has no previous instances of SQL Server.
Well, my server is already installed and running in production.
Q: can I "Install Integration Services" even if I have an SQL server installed and running ?
Q: do I absolutely require to have Integration Services to automate the backups?
Q: any simple way to just dump the database every night to a folder ?
Thanks!
JohnnyYou can use the Database Maintenance Wizard to setup a daily backup job.
BOL: "Use the Maintenance Plan Wizard
This topic describes how to create a single server or multiserver maintenance plan using the Maintenance Plan Wizard in SQL Server 2014. The Maintenance Plan Wizard creates a maintenance plan that Microsoft SQL Server Agent can run on a regular basis. This
allows you to perform various database administration tasks, including backups, database integrity checks, or database statistics updates, at specified intervals."
LINK: http://msdn.microsoft.com/en-us/library/ms191002.aspx
Kalman Toth Database & OLAP Architect
SQL Server 2014 Design & Programming
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012 -
Maintanence plan jobs are failing
Dear All,
We are facing problems with maintenance plan jobs in SQL server 2012. All jobs are failing with Following error
Executed as user: Testdbserver\SQLadmuser. Microsoft (R) SQL Server Execute Package Utility Version 11.0.3431.0
for 64-bit Copyright (C) Microsoft Corporation. All rights reserved. Started: 2:35:25 PM
Could not load package "\Maintenance Plans\Db_Backup" because of error 0x80070005.
Description: Access is denied. Source: Started: 2:35:25 PM Finished: 2:35:26 PM Elapsed: 0.094 seconds.
The package could not be loaded. The step failed.
Server details are: windows 2008 server with sql server 2012 ENT with core based licence. And SQL server , agent services are running with user 'SQLadmuser' (Nonadmin windows user). SQLadmuser is
having sysadmin server roleand in windows its nonadmin userid.
SQL Server maintenance jobs are running under sql server agent service account(by default) but jobs are failing. So After that i have created
credentials with proxy account and i have run those jobs with proxy account, all jobs are executing well with proxy.
or If iam changing SQL server, agent service accounts from SQLadmuser to
local system the maintenance jobs are working perfect.
I have cross verified all permissions and assigned SQLadmuser previlizes to the folders,root folders and regisries but still jobs are failing .
Note: I have observed that some of SQL server related groups are not displaying in local groups and iam unable to find tose groups. one below are reflecting.
1. Is there any relation with this sql groups to run the jobs?
2. Why this jobs are not working with sql server agent service account?
3. Does this create problems to whole SQL server instance in future?
4. Running jobs with proxy account will be having any impact on server?
Could you please help me to trouble shoot the maintenance jobs, Also sharing screenshots for reference.
Thanks in advance,
Nagesh
NageshHi Nagesh,
For many of the maintenance plans which require access to file system you might have to give access for the SQL Server Agent account directly to those folders. Otherwise your SQL Agent wont have access to the file system. This is why your maintenance plan
jobs like backups are failing.
Now the best way of dealing with this issue is what you have done. Using proxy accounts. By using proxy accounts you are not giving any additional privileges to your SQL Agent account. There is no issue for using proxy accounts for SSIS packages or Maintenance
plans where you need access outside of SQL. Infact proxy accounts are introduced for this purpose, so that Agent account can impersonate the credentials in the proxy and run the job in its security context.
The reason why the jobs are successfull when you change your SQL Agent account to local system is that Local System account has access to the local file system.
http://technet.microsoft.com/en-us/library/ms189064(v=sql.105).aspx
HTH
Regards, Ashwin Menon My Blog - http:\\sqllearnings.com -
Filtering extended event in sql server 2008 r2
This code has been generated in sql server 2012 (using the graphical interface).
CREATE EVENT SESSION [backupsmssql] ON SERVER
ADD EVENT sqlserver.sp_statement_starting(
ACTION(
sqlserver.client_app_name,
sqlserver.client_hostname,sqlserver.nt_username,
sqlserver.session_nt_username,sqlserver.sql_text,
sqlserver.username)
WHERE ([sqlserver].[like_i_sql_unicode_string]([sqlserver].[sql_text],N'%backup database%'))
WITH (MAX_MEMORY=4096 KB,EVENT_RETENTION_MODE=ALLOW_SINGLE_EVENT_LOSS,MAX_DISPATCH_LATENCY=30 SECONDS,MAX_EVENT_SIZE=0 KB,MEMORY_PARTITION_MODE=NONE,TRACK_CAUSALITY=OFF,STARTUP_STATE=OFF)
If I try to run it on sql server 2008 r2, the filtering part seems to be misinterpreted and the following error is thrown:
Msg 25706, Level 16, State 8, Line 1
The event attribute or predicate source, "sqlserver.sql_text", could not be found.
If I remove the where clause, the statement runs fine even though the sqlserver.sql_text is returned as part of the actions. So obviously the "sqlserver.sql_text" is existant. Why would I receive a message it does not exists in the
where clause? Was the "like_i_sql_unicode_string" inexistent in 2008 r2 or has the syntax changed in 2012. How can we filter sql_text in 2008 r2? I can't seem to find any doc regarding this, help would be appreciated.
p.s. There is a very similar question here but it has been closed by the moderators and does not answer the question:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/76c2719c-ea02-4449-b59e-465a24c37ba8/question-on-sql-server-extended-event?forum=sqlsecurityYou are on the right track:
The differences in the available events and predicates (source and compare) between SQL Server 2008/R2 and 2012 are quite substantial.
So the LIKE-operator is not available at all under 2008/R2 as a comparison-predicate, and sql_text is also not available as a source-predicate - only as action itself. - One has to realize, that actions really are not automatically also predicates.
For a complete list of predicates you can query like this:
SELECT dm_xe_packages.name AS package_name,
dm_xe_objects.name AS source_name,
dm_xe_objects.description
, dm_xe_objects.object_type
FROM sys.dm_xe_objects AS dm_xe_objects
INNER JOIN sys.dm_xe_packages AS dm_xe_packages
ON dm_xe_objects.package_guid = dm_xe_packages.guid
WHERE
(dm_xe_packages.capabilities IS NULL OR dm_xe_packages.capabilities & 1 = 0)
AND (dm_xe_objects.capabilities IS NULL OR dm_xe_objects.capabilities & 1 = 0)
AND dm_xe_objects.object_type
IN ( 'pred_source', 'pred_compare')
ORDER BY dm_xe_objects.object_type
Unfortunately for your specific filter there is not workaround for Extended Events.
You would have to resort to another predicate for filtering altogether.
BUT: if you are on Enterprise Edition, why not use Auditing. There is a Audit-Group for Backup/Restore.
It would be really simple like the following:
CREATE SERVER AUDIT SPECIFICATION [Audit_BackupRestores]
FOR SERVER AUDIT [AuditTarget]
ADD (BACKUP_RESTORE_GROUP)
If you are on Standard, you found yet another reason to upgrade to a supported version of SQL Server, I am afraid to say..
Andreas Wolter (Blog |
Twitter)
MCSM: Microsoft Certified Solutions Master Data Platform, MCM, MVP
www.SarpedonQualityLab.com |
www.SQL-Server-Master-Class.com -
Is SQL Developer 1.5.5 Compatible with SQL Server 2008
We are trying to perform a database migration and we keep getting "Locating Source Plugin" failed, we have the jTDS Drivers from sourceforge, tried several versions, including 1.0, 1.2, 1.2.2, 1.2.4, 1.2.5, 1.2.7, and 1.2.8... and i came across a thread Sql Dev Third party migration issue
and i was wondering if SQL Developer 1.5.5 is compatible with Microsoft SQL Server 2008?Those versions are ancient, older than SS2008 even.
Go get version 4.0.3 and a jTDS 3.1 driver.
Details here -
Crystal Reports XI connection problems - after updating to SQL Server 2008
Hello!
We have some ASP.NET 2.0 Applications that call some CR XI report files with parameters to generate PDF Files. After upgrading from SQL Server 2005 to 2008 the apps hang when trying to generate the PDFs. Some research with Fiddler showed that ever time a 401 Error is raised. Calling the reports directly from CR Designer with the same connection values and Parameter shows the appropriate data that means the log-in data iare functioning.
I already tried switching the data source driver from OLE DB to SQL Native - no effect!
Can it be that CR XI does not work with SQL Server 2008? Or is there an update for CR XI and SQL Server 2008?
Because we are in a hurry I hope somebody can solve my problem(s) ...?!
Thanks in advance,
FrankHi Frank,
No CR XI is not supported nor is any version completely at this time. What we've found issues in so far are the Time(7) time is returned as a string value and Stored Procedure Data/time parameter SQL creation. The Time(7) field is an OLE DB driver issue with Microsoft but the Date/time SP issue is our issue and it's currently tracked and escalated. It will be fixed for CR 2008 with SP3 I believe. And I've asked that the same fix be rolled back to CR XI R2 but waiting on the reply from R&D if it can be done.
What you need to do is download the trial version of CR XI R2 ( Release 2 ) and then use your XI Keycode to install it and it will work. Then update to the latest SP 5 Service Pack. XI is past it's end of life support which means there will be no updates or bug fixes any more.
Next, MS SQL Server 2008 does not work with the MDAC version of the Native drivers, you must install the MS SQL Server Client. You'll see the driver name is "MS SQL Server Native client 10". This is the one you need to use.
Another work around is to use ODBC, it seems to resolve all issues, but the client must be installed.
Thank you
Don -
How to resolve a windows authenticated orphaned user in Sql Server 2008 R2?
Hi,
We have some orphaned windows authenticated users(domain) in the database while it had been
migrated from Sql Server 2005 to Sql Server 2008 R2, because there are no corresponding
logins for the users. Will just adding the logins would be sufficient or after adding the
logins should we also run sp_change_users_login @Action='update_one' to resolve any sid
conflict. Thanking you in advance,
With regards
Binny MathewBinny
You have issue with orphaned users if you use Mixed Authentication. If you use Windows and move the db to the new server the Windows Login should be exist on the new server already.
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence -
MS SQL Server 2008 performance problem
We use TopLink 10.1.3.5 to connect to MS SQL Server 2008.
What we are seeing is that when a query is being run by TopLink a lot of cursors open up and remain open. Our database CPU usage goes up and it affects the whole application.
Our DBA took a look at it and said the database shows FETCH_APICURSOR* being used for select statements.
Is there a way to tell TopLink not to use cursors for queries?
Thanks.Can you pin point a particular TopLink query tied to the " FETCH_APICURSOR* " call in the app and post how it is being created?
My guess is that the application is specifying the TopLink query object to return a cursor or stream and not closing it in all cases, or keeping them open for a long period - did you say they were leaking, or is it just that a large number are open at a time leading to performance problems?
This streams+cursors are described in the TopLink docs here
http://docs.oracle.com/cd/E21764_01/web.1111/b32441/qryadv.htm#CJGJBHGJ
or the 10g docs here:
http://sqltech.cl/doc/oas10gR3/web.1013/b13593/qryadv010.htm
If this is the case, you might want to use a different strategy such as pagination instead of cursors, described here:
http://docs.oracle.com/cd/E17904_01/web.1111/b32441/optimiz.htm#CHDIBGFE
Best Regards,
Chris -
Has mssql2008r2 got "Cumulative Update Package 6 for SQL Server 2008 Service Pack 1"
hi,
I have
Microsoft SQL Server 2008 R2 (RTM) - 10.50.1600.1 (Intel X86) Apr 2 2010 15:53:02 Copyright (c) Microsoft Corporation Express Edition with Advanced Services on Windows NT 5.1 <X86> (Build 2600: Service Pack 3)
, i wanted to know has it got
"Cumulative Update Package 6 for SQL Server 2008 Service Pack 1"
so that i do not have to install or i have to install
yours sincerleyThank u, please tel me can i instal sp3.
I have noticed the link of sp2 (http://www.microsoft.com/en-in/download/details.aspx?id=30437)
has listed
(SQL Server 2008 R2 Express Edition)
SQL Server 2008 R2 Service Pack 2 (SP2) is now available for download. SQL Server 2008 R2 service packs are cumulative and can be used to upgrade all releases of SQL Server 2008 R2 to Service Pack 2. SQL Server 2008 R2 Service Pack 2 contains Cumulative Update
1 to 5 from SQL Server 2008 R2 SP1. The package can be used to upgrade the following SQL Server 2008 R2 editions:
SQL Server 2008 R2 Parallel Computing Edition
SQL Server 2008 R2 Datacenter Edition
SQL Server 2008 R2 Enterprise Edition and Developer Edition
SQL Server 2008 R2 Standard Edition
SQL Server 2008 R2 Web Edition
SQL Server 2008 R2 Workgroup Edition
SQL Server 2008 R2 Express Edition
where as link of sp3(http://www.microsoft.com/en-us/download/details.aspx?id=44271)
has not listed express edition but written in general.
SQL Server 2008 R2 Service Pack 3 (SP3) is now available for download. SQL Server 2008 R2 service packs are cumulative and can be used to upgrade all releases of SQL Server 2008 R2 to Service Pack 3. SQL Server 2008 R2 Service Pack 3 contains
Cumulative Update 1 to 13 from SQL Server 2008 R2 SP2. The package can be used to upgrade the following SQL Server 2008 R2 editions:
SQL Server 2008 R2 Parallel Computing Edition
SQL Server 2008 R2 Datacenter Edition
SQL Server 2008 R2 Enterprise Edition and Developer Edition
SQL Server 2008 R2 Standard Edition
SQL Server 2008 R2 Web Edition
SQL Server 2008 R2 Workgroup Edition
yours sincerley -
TopLink 10.1.3.0 and SQL Server 2008 XML datatype
We use TopLink 10.1.3.0 and SQL Server 2008 database. We are trying to map a table with a column of XML datatype, but the 'Direct to XMLType' Mapping is disabled in the Workbench.
Is it possible to map an XML datatype? If so, can you please some guidance on how it can be achieved.
Thanks for the help.
Edited by: amehta5 on Nov 4, 2010 4:09 PMThe Direct to XMLType was desired for the Oracle XMLType. TopLink does not currently support it for SQL Server. You could extend the SQLServerPlatform to add you own support. You must also be able to just map it to a String using a DirectToFieldMapping. If the MW does not let you use the mapping, you can add it in a customizer/amendment method.
FYI: If you are using TopLink 11, you should be using the eclipselink.jar and ideally using JPA, and not using the Mapping Workbench.
James : http://www.eclipselink.org -
Help! Licence for SQL Server 2008 VM on Windows 2012
I am confused by latest Microsoft Virtual server licence for SQL Server 2008.
We have a Hyper-V host running Windows Server 2012 R2 Datacenter. Displayed in its Task Manager, it has 16 cores and 32 logical processors (with hyper-threading turned on). A SQL Server VM is running on this host with 10 Virtual processors (showing from Hper-V
Manager). The SQL Server edition is SQL Server 2008 Standard.
We are using "Per Core Licensing Model". Now, the question is how many licences we need to purchase for the above SQL Server?
There are "SQL Server 2008 Licensing Guide", "Microsoft SQL Server 2012 Virtualization Licensing Guide" and "Microsoft SQL Server 2014 Licensing Guide". But none of them covers this scenario, which is running SQL Server 2008 on
Windows 2012 Hyper-V host Server.
Could you please provide me your opinion: Should I license 10 cores for the SQL Server VM or license 5 cores (because the hyper-threading on physical server) ? Thank you very much in advance!I am confused by latest Microsoft Virtual server licence for SQL Server 2008.
We have a Hyper-V host running Windows Server 2012 R2 Datacenter. Displayed in its Task Manager, it has 16 cores and 32 logical processors (with hyper-threading turned on). A SQL Server VM is running on this host with 10 Virtual processors (showing from Hper-V
Manager). The SQL Server edition is SQL Server 2008 Standard.
We are using "Per Core Licensing Model". Now, the question is how many licences we need to purchase for the above SQL Server?
There are "SQL Server 2008 Licensing Guide", "Microsoft SQL Server 2012 Virtualization Licensing Guide" and "Microsoft SQL Server 2014 Licensing Guide". But none of them covers this scenario, which is running SQL Server 2008 on
Windows 2012 Hyper-V host Server.
Could you please provide me your opinion: Should I license 10 cores for the SQL Server VM or license 5 cores (because the hyper-threading on physical server) ? Thank you very much in advance! -
Backup Failed in SQL server 2008
Backup is failing for only one database on the server.
Msg 3201, Level 16, State 1, Line 1
Cannot open backup device 'F:\databasename_backup_2014_07_29.bak'.
Operating system error 5(failed to retrieve text for this error. Reason: 15105).
Msg 3013, Level 16, State 1, Line 1
BACKUP DATABASE is terminating abnormally.
** SAME DATABASE BACKUP IS COMPLETED SUCCESSFULLY ON OTHER DRIVE **
we have tried the below steps but still it is failed.
Microsoft SQL Server 2008 R2 (SP2) - 10.50.3720.0 (X64) Apr 27 2012 13:51:37 Copyright (c) Microsoft Corporation
Standard Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1) (Hypervisor)
1.checked for any spaces is th database name --No space
2.added service account to administrator .
3.provided full access to backup folder.
4.Compatibilty is 80 .
5.created backup devide to same location and tried still it got failed.
10 percent processed.
20 percent processed.
30 percent processed.
40 percent processed.
50 percent processed.
60 percent processed.
70 percent processed.
Msg 3202, Level 16, State 1, Line 1
Write on "F:\Data\Backup\New_Backup_databasename.bak" failed: 665(failed to retrieve text for this error. Reason: 15105)
Msg 3013, Level 16, State 1, Line 1
BACKUP DATABASE is terminating abnormally.
6.Changed the database ower to service account,NO luckHi,
How big is database ? Does F drive has enough space on it. Issue does not seems with SQL Server backup it is with F drive or network connecting Server to drives.
Can you give more information about F drive is it a SAN, Local disk ?
If SQL server backup would have been issue it would have not processed uptill 70 % ( unles its bug). First error message with OS error 5 means access denied. Ater then you gave necessary rights and now backup issue is not due to SQL Server but while writing
to F drive some unusual thing is happeing which is causing backup to fail.Can you also involve SAN team as well.
** SAME DATABASE BACKUP IS COMPLETED SUCCESSFULLY ON OTHER DRIVE **
Does this mean backup of same database completes successfully on other drive if so it is a SAN issue or connection issue between SAN and server
Is SQL server 2008 updated to latest service pack ? Why do you use 80 compatibility mode. Although these questions are not realted to backup
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles -
Setting Expiration period for Maintenance Plan Backups fails to work in sql server 2008
I have created a Maintenance Plan to do a nightly full backup and set the backup
set to expire after 4 days in sql server 2008 R2.
Weeks later, old backups are sitting on the hard drive.Please do the needful.I have created a Maintenance Plan to do a nightly full backup and set the backup
set to expire after 4 days in sql server 2008 R2.
Weeks later, old backups are sitting on the hard drive.Please do the needful.
Can any one please explain what is the use of BACKUP Expiration ???
I created a backup with expiration date but still am using the same backup file to restore databases?? Then what is the use of Expiration date? -
Backup Restore With SQL Server 2008 R2 although it succeeded with SQL Server 2008
Dears;
I have a Full backup of some DB of around 417 GB within SQL Server 2008 R2 , and when I tried to restore it , i get stuck several times with the error below :
Restore failed for Server (Microsoft.SqlServer.SmoExtended)
A system assertion check has failed. Check the SQL Server error log for details. Typically, an assertion failure is caused by a software bug or data corruption. To check for database corruption, consider
running DBCC CHECKDB. If you agreed to send dumps to Microsoft during setup, a mini dump will be sent to Microsoft. An update might be available from Microsoft in the latest Service Pack or in a QFE from Technical
Although I have restored
successfully other several Full+ Deferential backups for the same DB while it was in SQL Server 2008 not 2008 R2.
And so I have rounded all different possible assumptions for such common know error by Microsoft for SQL Server 2000, 2005, 2008 but
no way as next:
1-
I have attempted to restore it within 2 environments clustered and non-clustered of SQL Server 2008 R2.
2-
I have attempted to restore verify it and it was so fine .
3-
I have attempted to restore it using Continue_after_error ,no_checksum but no way.
4-
I have attempted to move Backup file to another Storage but no way.
5-
I have scheduled jobs to DBCC
Checkdb the live DB and it wasn’t any errors since long time right now
6-
I have also DBCC check all master +msdb+model+Tempdb ,and they are so fine
7-
I have also checked all I/O subsystem of SAN and Network controllers , but they are fine evidenced much more by my trial on 2 different environments.
8-
I have also checked Memory and it is so fine all the time since I have 128 GB memory and I control it also so well.
For DB Design +Structure :
It has 20 Files containing tables partitioned horizontal +Vertically
(Schema Partitioning +File Stream partitioning ) through these 20 files.
I have Data compression of the required tables only.
I have one table of more than 300 GB alone which is partitioned as mentioned above.
I have implemented Read Committed Snapshot isolation level using row versioning integrated so well with File stream technology since it is a new feature of SQL 2008 R2.
DB is in simple recovery model for garbage collection of all file stream data as a result of much Delete /update in images themselves.
So any one has any idea about such case..How to solve it…?Hi Ashwin,
When i searched with no answers these are listed out. So i thought this is still existing. Now on wards let me check the data and time of latest reply. Thanks for guidance.
It was happening by oversight. Thanks for guidance.
Regards, Pradyothana DP. Please Mark This As Answer if it solved your issue. Please Mark This As Helpful if it helps to solve your issue. ========================================================== http://www.dbainhouse.blogspot.in/ -
SQL Server 2008 R2 & 2008 R2 SP1 installation fails in Windows server 2012
Hi All,
I have a strange issue here. I have a Windows server 2012 VM where i want to deploy SQL 2008 R2 Enterprise edition.
When i Run the setup every thing goes fine and during the installation wizard i get this error " The Folder path Program files contains invalid characteristics. I get this error 3 - 4 times during the installation wizard and the installation fails.
Below is the screenshot for the same.
So i checked few articles regarding the compatibility issue and found the below article and upgraded my setup to SQL 2008 R2 SP1 using the below article.
http://blogs.msdn.com/b/petersad/archive/2011/07/13/how-to-slipstream-sql-server-2008-r2-and-a-sql-server-2008-r2-service-pack-1-sp1.aspx
Again i still see the same above errors and with that a new error related to a MOF File.
Below are the contents of the error logs. Can some one assist on this issue.
======================================================
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Exit code (Decimal): -2068052692
Exit facility code: 1212
Exit error code: 1324
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Start time: 2015-01-15 13:53:03
End time: 2015-01-15 14:04:29
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150115_135043\Detail.txt
Exception help link: http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.50.2500.0%26EvtType%3d0xA60E3551%400xD3BEBD98%401211%401
Machine Properties:
Machine name: ALPCLDSCOM01
Machine processor count: 4
OS version: Future Windows Version
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
Installation location: D:\SQLServer2008R2_SP1\x64\setup\
Installation edition: ENTERPRISE
Slipstream: True
SP Level 1
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: False
AGTSVCACCOUNT: E2KLAB\SCOMAC
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Automatic
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASDOMAINGROUP: <empty>
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Automatic
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150115_135043\ConfigurationFile.ini
CUSOURCE:
ENABLERANU: False
ENU: True
ERRORREPORTING: False
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: SQLENGINE,FULLTEXT,RS,SSMS,ADV_SSMS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
FTSVCPASSWORD: *****
HELP: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT AUTHORITY\NetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE: D:\SQLServer2008R2_SP1\SP
PID: *****
QUIET: False
QUIETSIMPLE: False
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSVCACCOUNT: E2KLAB\SCOMAC
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: E2KLAB\SCOMAC
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: E2KLAB\Gautamr,E2KLAB\SCOMAC,E2KLAB\SCOM Admins
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: False
TCPENABLED: 1
UIMODE: Normal
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150115_135043\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 1324
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150115_135043\BestPracticesPolicies_Cpu32_1.log
MSI error description: The folder path 'Program Files (x86)' contains an invalid character.
Configuration status: Passed
Feature: Full-Text Search
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Reporting Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Complete
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Basic
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 1324
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150115_135043\BestPracticesPolicies_Cpu32_1.log
MSI error description: The folder path 'Program Files (x86)' contains an invalid character.
MSI status: Failed: see details below
MSI error code: 1324
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150115_135043\sql_common_core_loc_Cpu64_1033_1.log
MSI error description: The folder path 'Program Files' contains an invalid character.
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150115_135043\SystemConfigurationCheck_Report.htm
Gautam.75801Hi Alberto,
Still the same issue.
I installed the SQL 2008 R2 without SP1 and changed the service accounts to system account and repaired the .NET using the .NET Repair tool
Also changed the installation directory to D:\ Drive this time. Still same issue.
log file:
===============
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Exit code (Decimal): -2068052692
Exit facility code: 1212
Exit error code: 1324
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Start time: 2015-01-15 22:55:37
End time: 2015-01-15 23:07:32
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150115_225416\SQLSysClrTypes_Cpu64_1.log
Exception help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.2500.0
Machine Properties:
Machine name: ALPCLDSCOM01
Machine processor count: 4
OS version: Future Windows Version
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
SPLevel: 1
Installation location: D:\SQL Server 2008 R2 Datacenter edition for only Windows server 2008 R2\x64\setup\
Installation edition: ENTERPRISE
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: False
AGTSVCACCOUNT: NT AUTHORITY\SYSTEM
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Automatic
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASDOMAINGROUP: <empty>
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150115_225416\ConfigurationFile.ini
CUSOURCE:
ENABLERANU: False
ENU: True
ERRORREPORTING: False
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: SQLENGINE,FULLTEXT,RS,SSMS,ADV_SSMS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
FTSVCPASSWORD: *****
HELP: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: D:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: D:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: D:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT AUTHORITY\NetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE:
PID: *****
QUIET: False
QUIETSIMPLE: False
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSVCACCOUNT: NT AUTHORITY\SYSTEM
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT AUTHORITY\SYSTEM
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: E2KLAB\Gautamr
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: False
TCPENABLED: 1
UIMODE: Normal
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150115_225416\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 1324
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150115_225416\BestPracticesPolicies_Cpu32_1.log
MSI error description: The folder path 'Program Files (x86)' contains an invalid character.
Configuration status: Passed
Feature: Full-Text Search
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Reporting Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Complete
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Basic
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 1324
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150115_225416\BestPracticesPolicies_Cpu32_1.log
MSI error description: The folder path 'Program Files (x86)' contains an invalid character.
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150115_225416\SystemConfigurationCheck_Report.htm
Any other suggestion i can try ?
Gautam.75801
Maybe you are looking for
-
PSA deletion variant - Syntax error in program "SAPLRS_PSA_DEL_GUI
Hi. Recently, we have implemented the note 1357168 to overcome the error "Object name &1 after the prefix has to start with ABC...XYZ". But after that if we maintain any PSA/Change log variant we are getting the below error Syntax error in program "S
-
"Your Benefits and Payroll Information" links referencing the wrong URL-ESS
Hi Everyone, At my project we need to change the underlying URL for the following links found under "Your Benefits and Payroll Information" page. Other Benefits and Discount Programs Family Status Change Form for Mid-year Benefit Changes Other Benef
-
Duplicate keywords in different heirarchies
When you drag a keyword into a parent that already has the keyword the cursor turns into the no-no circle slash symbol and will not allow you to drop. A preferred behavior would be to allow the drop, and integrate with the existing keyword. This is p
-
In the latest iMovie update, where are the media movie files or clips get stored now? David
-
Missing Templates??? Motion 3
Hi, I have the sneaky suspicion that I may be missing some Motion 3 templates. For instance, in the 3D Text Projects menu, I only have HD options available [ie, no PAL or NTSC] -- and the only other Motion 3/3D template I have is the 'Blocks' selecti