SQL Server 2014 can only backup once after restart. Subsequent backups fail
Obvious response...install SP1
Here is an odd one. I have SQL Server 2014 (not sp1) running in a cluster. Everything seems to be working fine. No performance issues or no crashes/error log issues.However, I can only backup a DB once after I restart (not reboot OS) SQL Server. If I try to backup the db a second time it fails, does not matter if I wait minutes, hours or days. I have tried switching backup locations and even have tried backing up to our Azure account. They all work the first time and fail on the subsequent attempts.Both machines are fully updated Windows Server 2012 R2. The only update available is SP1 for SQL Server. The failover is a Hyper V, while the active node is a physical server.Below is the error I get, which does not give me much detail. Any thoughts would be much appreciated. It is a pain to have to restart each night and manually backup the...
This topic first appeared in the Spiceworks Community
Similar Messages
-
SQL Server 2014 Always on HA takes 8-14 seconds to fail over. Application side timeouts occur
Hi All,
I have a very similar post in the SQL Server 2014 forums too (https://social.technet.microsoft.com/Forums/sqlserver/en-US/adb5e338-907e-4405-aa62-d3ea93c7a98a/sql-server-2014-always-on-ha-takes-814-seconds-to-fail-over-application-side-timeouts-occur?forum=sqldisasterrecovery) -
advice in the end was to post a question here.
SQL Server Nodes, 2014 (12.0.2480.0)
1 Share witness (on separate subnet)
1 Cluster
1 Listener
I have been testing the response time to failovers – both manual (right-click, fail over in SSMS) and Automatic (shut down the primary host). The way I am testing response is to have a SSMS query running on my desktop, connected to the listener querying
a small table and hit execute.
The Query response time, from execute to receiving the result, has been between 8 and 14 seconds based on my testing. My previous experience (in a separate environment) showed around 2 second fail over times in a very similar configuration.
Availability DB is 200Mb and is not actively used. The nodes are synchronised.
SQL Server Hosts: Windows 2012, 2 cpu, 8gb RAM.
Questions:
1: It’s a big question but what should I expect for a ‘normal’ fail over time. Keep in mind this scenario is about as simple as it gets.
2: As it stands an 8 to 14 second ‘outage’ could cause some applications to time out. Or am I being un-reasonable? I am seeing the very simple query in SSMS to time out with this:
Msg 983, Level 14, State 1, Line 2
Unable to access availability database 'DATABASE' because the database replica is not in the PRIMARY or SECONDARY role. Connections to
an availability database is permitted only when the database replica is in the PRIMARY or SECONDARY role. Try the operation again later.
Cluster logs are long - this section accounts for 8 seconds of the 11 second outage I experienced. I can supply the full log if required. Also this log is just the 2 cluster nodes, I removed the witness share to make sure it was as simple as possible.
00001090.00002128::2015/02/25-03:05:08.255 INFO [GEM] Node 2: Deleting [1:65 , 1:71] (both included) as it has been ack'd by every node
00001ee4.00002130::2015/02/25-03:05:10.107 INFO [RES] Network Name: Agent: Sending request Netname/RecheckConfig to NN:5b81e7bd-58fe-4be9-a68a-c48ba2aa552b:Netbios
00001090.00002128::2015/02/25-03:05:11.888 INFO [GEM] Node 2: Deleting [1:72 , 1:73] (both included) as it has been ack'd by every node
00001090.00002698::2015/02/25-03:05:11.889 INFO [GUM] Node 2: Processing RequestLock 2:49
00001090.00002128::2015/02/25-03:05:11.890 INFO [GUM] Node 2: Processing GrantLock to 2 (sent by 1 gumid: 67)
00001090.00002698::2015/02/25-03:05:11.890 INFO [GUM] Node 2: executing request locally, gumId:68, my action: /dm/update, # of updates: 1
00001090.00002128::2015/02/25-03:05:12.890 INFO [GEM] Node 2: Deleting [1:74 , 1:74] (both included) as it has been ack'd by every node
00001ee4.00002130::2015/02/25-03:05:15.107 INFO [RES] Network Name: Agent: Sending request Netname/RecheckConfig to NN:5b81e7bd-58fe-4be9-a68a-c48ba2aa552b:Netbios
00001090.00002128::2015/02/25-03:05:16.988 INFO [GUM] Node 2: Processing RequestLock 1:28
Thanks in advance.
KeeganHi Keegan,
From these event log , what I can see is "Sending request Netname" wasted the time .
Could you please tell us the network configuration of that cluster nodes ?
If I recall correctly , it is recommended to only remain Tcp/IP protocol and disable NetBIOS over TCP/IP for "Private Network" , also do not configure DNS/Wins default gateway for "Private Network" :
https://support.microsoft.com/kb/258750?wa=wsignin1.0
After that please test again .
Best Regards,
Elton JI
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] . -
Can't burn Sqldev_eng_mar14.img file after downloading SQL Server 2014 Developer Edition
I have successfully downloaded the Sqldev_eng_mar14.img file after purchasing the SQL Server 2014 Developer Edition but have been unable to write the file to a disk....getting error message that the Selected Disk Image File isn't valid when using
Windows Disk Image Burner. Any insight?Try a new download.
Kalman Toth Database & OLAP Architect
SQL Server 2014 Database Design
New Book / Kindle: Beginner Database Design & SQL Programming Using Microsoft SQL Server 2014 -
We have replaced a SQL Server 2005 with a SQL Server 2014 (new physical server.) Have the new server set up to use SQL Server login OR Windows user login. Had old server connecting (for a particular DB) to front end Access (2010 or 2013) as guest for
anyone logged into the Windows NT Network with a read only ODBC connection. Have the DB in the new server set to include guest as db_datareader (with only SELECT permission for the securables of each table and view being linked) but when any Windows user not
specifically listed as a SQL DB user tries to use the front end they get an error of:
Microsoft SQL Server Login
Connection failed:
SQL State: '28000'
SQL Server Error: 18456
[Microsoft][OCBC SQL Server Driver][SQL Server] Login failed for user {domain\user}.
After closing that pop-up window a server login window appears. Of course, since the guest user is not specifically listed as a user in the DB that fails also. It seems like there should be a very simple solution to this, but I can't seem to find it. I want
to allow anyone logged in on the Windows system (locally) to be able to open the MS Access file (on their work station machine) and run their own (read only; select) queries on the SQL Server database. Any suggestions?
Thanks a billion in advance ----Thanks for the response Olaf. I have now spent weeks researching this. I realize that using the guest account in most situations is not advised. As mentioned, I have restricted the guest account to allow the db_datareader role only, and have explicitly denied
all other roles, as well as allowing select only, and still have no access for the guest account.
The suggested fix in the second link you provided, of using Windows groups is not plausible for my situation either. We are a scientific field research institution, with a few long term users and lots of users that may have Windows accounts for a few months,
and then they are gone. It would be a nightmare for the network tech to try to keep a group account up to date, and we need to give access (read only, of course) to anyone logged into the system. Realize that the ONLY access of any kind to this database is
thru MS Access ACCDB, using a (by default) read only OCDB connection.
This type of access is used particularly because researchers need to be able to set up their own queries, and the MS Access query interface is particularly convenient for people who are not themselves SQL experts, yet are trying to get some very advanced
levels of output. Putting the database online is not practical because then we are back to the need for a comprehensive query interface, and just picking up general subsets of the data online (from a basic web page search feature) would be out of the question,
since the result set would involve hundreds of thousands if not millions of records.
So - that said - what exactly would you suggest, assuming we don't have the funds to buy a whole new system, and have spent plenty of money with Microsoft's Enterprise level MS Office so that all work stations have MS Access, and Microsoft's SQL Server,
as well as running our network on Microsoft's network software. -
How to restore a database backup taken from a SQL Server 2012 instance to SQL Server 2014
I am trying to restore a database backup taken from a SQL Server 2012 instance to my new SQL Server 2014 instance. When I add the .bak through the Mgmt studio UI, it does not seem to find a backup set in the file so I cannot proceed (does not give
me any errors though either. I tried restoring through TSQL command but only got a database restore terminating abnormally error with no other details. How can I restore this database to SQL 2014?Hello,
Please examine SQL Server Error Log and share with us any error you can find. The following article may locate the log:
http://msdn.microsoft.com/en-us/library/ms187109.aspx
Regards,
Alberto Morillo
SQLCoffee.com -
I Cant find Sql Server 2014 express edition after installing it. How do I start the program
Hello,
I have Installed Sql Server 2014 Express edition and downloaded the AdventureWorks 2014 database and Back up files.
I cannot find an Icon for the Sql Server on my Desktop to start the Sql program. There is only an icon for the Server Installation Center.
How do I start the Sql server. I tried opening the AdventureWorks Database but I cant open it.
Thank youThanks Shanky
When I installed Sql I chose Windows Login. After Installing I logged into Sql server using windows account. Should I have chosen an Sql account instead.
Hi,
Its is Ok if you have chosen windows Login. But it should be part of local administrator. I assume you know how to check
Is it not a security risk having to run Sql server as an administrator when using windows account or sql account.
Yes it is but at this point where I guess only you would be using and to get around with problem which you are facing. its recommended to run SQL server service with least privileged domain account. If you wan to read more see
this link
How do I make sure the account with which SQL Server service is running has full permission on folder where adventure works mdf and ldf files are located.
Please make a habit to search on net it is filled with lot of information.
This link would help.
Locate the folder on drive where AD mdf and ldf file reside. Right click on folder select properties and then select security tab. Click on add and then type account name and search and add it
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Articles -
SSIS packages are failing after upgrade to SQL server 2014
Hi,
I have some SSIS packages running on SQL server 2012 .
After I upgraded to SQL server to 2014 from 2012 , the SSIS jobs are failing on the SQL agent.
And i can see its related to Data source connectivity to the SQL agent. I hope it not able to identify the connection manager in SQL agent. And connection adapter is not upgraded.
I read some articles about this and they say it not able to connect to SQL server agent job.
And, I can see that the package is running if i run manually using SQL 2012 run time.
Why its not running on SQL 2014 ?
did i miss anything while upgrading SQL server 2014 ?
Please give me some suggestions to solve this issue.
And is there any way i can change the SQL server agent 2014 to adapt this and run ?
Below is the error :
The Package filed to load due to error 0XC00100014 " One or more error occurres. There should be more specific errors preceding this one that expalins the details of the erroes. This message is used as a return value from functions that encounter
errors.: This occures when CPackage::LoadFormXML fails.
Regards,
Vinodh Selvaraj.I think you have typed this error message by yourself.
Anyway, as it says there should be more error preceeding to this. Do you have any other errors which describles the exact issue stating at what task it fails?
If not, then there are various reasons behind this issue. 3rd party connection manager such as Oracle Attunity or it may be 32/64 bit issue.
You may try executing package in 32 bit mode from SQL Agent Job.
Please refer:
http://blogs.msdn.com/b/farukcelik/archive/2010/06/16/why-package-load-error-0xc0010014-in-cpackage-loadfromxml-error-appears-while-trying-to-run-an-ssis-package.aspx
http://www.bidn.com/blogs/timmurphy/ssas/1397/package-failed-to-load-due-to-error-0xc0010014
-Vaibhav Chaudhari -
Data Flow Task problems after installing SQL Server 2014 SSIS
I can't create any Data Flow Task. Once I create (tested and working) Connection (it doesn't
matter if it is Excel, Flat File or other) and try to use it with a Source Assistant, I get the following messages:
===================================
The component could not be added to the Data Flow task.
Could not initialize the component. There is a potential problem in the ProvideComponentProperties method. (Microsoft Visual Studio)
===================================
Error at Data Flow Task [SSIS.Pipeline]: Component ", clsid {C4D48377-EFD6-4C95-9A0B-049219453431}" could not be created and returned error code 0x80070005 "Access is denied.". Make sure that the component is registered correctly.
Error at Data Flow Task [ [1]]: The component is missing, not registered, not upgradeable, or missing required interfaces. The contact information for this component is "".
===================================
Exception from HRESULT: 0xC0048021 (Microsoft.SqlServer.DTSPipelineWrap)
Program Location:
at Microsoft.SqlServer.Dts.Pipeline.Wrapper.CManagedComponentWrapperClass.ProvideComponentProperties()
at Microsoft.DataTransformationServices.Design.PipelineTaskDesigner.AddNewComponent(String clsid, Boolean throwOnError, Boolean select)
===================================
The component could not be added to the Data Flow task.
Could not initialize the component. There is a potential problem in the ProvideComponentProperties method. (Microsoft Visual Studio)
The component could not be added to the Data Flow task.
Could not initialize the component. There is a potential problem in the ProvideComponentProperties method. (Microsoft Visual Studio)
===================================
Error at Data Flow Task [SSIS.Pipeline]: Component ", clsid {C4D48377-EFD6-4C95-9A0B-049219453431}" could not be created and returned error code 0x80070005 "Access is denied.". Make sure that the component is registered correctly.
Error at Data Flow Task [ [1]]: The component is missing, not registered, not upgradeable, or missing required interfaces. The contact information for this component is "".
Error at Data Flow Task [SSIS.Pipeline]: Component ", clsid {C4D48377-EFD6-4C95-9A0B-049219453431}" could not be created and returned error code 0x80070005 "Access is denied.". Make sure that the component is registered correctly.
Error at Data Flow Task [ [1]]: The component is missing, not registered, not upgradeable, or missing required interfaces. The contact information for this component is "".
===================================
Exception from HRESULT: 0xC0048021 (Microsoft.SqlServer.DTSPipelineWrap)
Program Location:
at Microsoft.SqlServer.Dts.Pipeline.Wrapper.CManagedComponentWrapperClass.ProvideComponentProperties()
at Microsoft.DataTransformationServices.Design.PipelineTaskDesigner.AddNewComponent(String clsid, Boolean throwOnError, Boolean select)
Exception from HRESULT: 0xC0048021 (Microsoft.SqlServer.DTSPipelineWrap)
at Microsoft.SqlServer.Dts.Pipeline.Wrapper.CManagedComponentWrapperClass.ProvideComponentProperties()
at Microsoft.DataTransformationServices.Design.PipelineTaskDesigner.AddNewComponent(String clsid, Boolean throwOnError, Boolean select)See examples here:
http://www.sqlusa.com/bestpractices/ssis-wizard/
What is your data source?
What is your data destination?
Kalman Toth Database & OLAP Architect
SQL Server 2014 Database Design
New Book / Kindle: Beginner Database Design & SQL Programming Using Microsoft SQL Server 2014 -
SQL Server 2014 Setup can't find instance configuration
I was try to install the SQL Server 2014 express but it is not showing Instance Configuration when doing the installation.
After finish the installation, the SQL Server services is not item listed.
Could anyone help me?I was try to install the SQL Server 2014 express but it is not showing Instance Configuration when doing the installation.
After finish the installation, the SQL Server services is not item listed.
Could anyone help me?
Its not possible that instance configuration page is not coming you must have downloaded wrong installable, I guess you downloaded SSMS installable.Please take help of below link to download and install SQL Server 2014
https://shipworks.freshdesk.com/support/articles/4000025881-manually-installing-microsoft-sql-server-2014
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Articles -
Hello,
Can you replicate databases from SQL Server 2014 Enterprise Edition to SQL Server 2014 Standard edition?
Thanks.Yes, you can replicate from Enterprise edition to Standard edition. The only caveat is Peer-to-Peer Replication requires all nodes to be Enterprise Edition.
Brandon Williams (blog |
linkedin) -
Backup Database From SQL Server 2014 with expired trial period.
Hi,
Looking for some advice. I created a database on a SQL Server 2014 Trial Version i downloaded from the Microsoft website. Our company bought a license for SQL Server 2012 instead of 2014, how can i migrate my database to 2012 without the ability to connect
to my 2014 Server or Management studio (Because the trial period has expired)?
Thank You.Hi,
Alternatively, you can stop SQL Services and then locate the mdf & ldf file copy these files to new location.
Now you try to attach above files in new server.
Sorry little correction
I dint pay attention to 2014 to 2012, in this case you need to attach these files on SQL Server 2014 then generate script and execute these script on 2012.
Please refer following article on how to attach database.
Attach a Database
Also refer following post with similar issue.
MS SQL 2008 Evaluation expired...need to get database backup
Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
Praveen Dsa | MCITP - Database Administrator 2008 |
My Blog | My Page -
Sql server 2014 set password for backup file
We are using sql server 2014, all our databases will be automatically backed up as per schedule. Now need to protect our
backed up databases with password. We have tried below queries:
BACKUP DATABASE teknomectest TO DISK='C:\test.BAK' WITH MEDIAPASSWORD='sqlpas'
Executing it shows below error
One or more of the options (mediapassword) are not supported for this statement.
Analyzing which we came to know this feature is blocked in sql server 2012 itself. Is there any other way to protect bak file.
Bala
BalaMayurPaghal, Bala said he is using SQL server 2014
Beginning with SQL Server 2012, the PASSWORD and MEDIAPASSWORD options
are discontinued for creating backups. It is still possible to restore backups created with passwords.
https://msdn.microsoft.com/en-us/library/ms186865.aspx -
Why can't I log into my "Local" sql server (sql server 2014) with my Sql Server Authentication UID ?
I just got a new work station (win7 Pro) which has the following sql server
SELECT SERVERPROPERTY('productversion'), SERVERPROPERTY ('productlevel'), SERVERPROPERTY ('edition')
returns
12.0.2254.0 RTM Developer Edition (64-bit)
Select @@version
returns
Microsoft SQL Server 2014 - 12.0.2254.0 (X64)
Jul 25 2014 18:52:51
Copyright (c) Microsoft Corporation
Developer Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1)
I added/created a new (random) user account to this server [joe123] and made him sa and mapped him to everything, the password never expires, ...
when I try to login to this local server the login fails, but I can log into this server with my windows integrated account (also sa). What do I need to do so that the joe123 account can login to the server
Rich PCheck if both "SQL Server and Windows Authentication mode" is set (not just Windows Authentication mode). Server-->right click and select properties --> Security
Satish Kartan http://www.sqlfood.com/ -
Issue of Text Qualiffier after upgrading to SQL Server 2014 Standard
Hi,
I'm facing an issue of Text Qualifier after I upgrading my system to SQL Server 2014 Standard Edition (Microsoft SQL Server 2014 - 12.0.2000.8 (X64)
Feb 20 2014 20:04:26
Copyright (c) Microsoft Corporation
Standard Edition (64-bit) on Windows NT 6.3 <X64> (Build 9600: ) (Hypervisor)
I have a csv file with format: Text Qualifier is double pipes ||, Vertical Bar (|) as Column Delimiter and Row Delimiter is CRLF.
For example file:
||Col1|||||Col2||
||ABC|||||XYZ||
This file is working OK in SQL Server 2008 R2 (SP2) but it does not work in SQL Server 2014. It raised error message while running.
Error: An error occurred while skipping data rows.
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on MediaAgencyGroup returned error code 0xC0202091. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure
code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
Any suggestion here?
Thanks,Yes
There's a difference in the way text qualifiers are parsed from 2012 onwards
see
http://www.proactivespeaks.com/2012/06/22/my-5-favorite-sql-2012-ssis-features-so-far/
http://blog.concentra.co.uk/2013/06/24/ssis-2012-flat-files-now-greatly-improved-but-are-they-good-enough-yet/
ANyways my preferred way to do this is as below
http://visakhm.blogspot.in/2014/06/ssis-tips-handling-embedded-text.html
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page -
I have an I series (IBM AS400) server linked "OK" to a sql 2005 sql server (32 big). I copied the link script (but changed credentials) from the sql server 2005 link and attempted to run it in the sql server 2014 server (on win 7 64
bit). There are no complaints from SSMS when I run the script, but when I try to query a table I get this error message:
OLE DB provider "MSDASQL" for linked server "CWMPDTA" returned message "[Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failed".
OLE DB provider "MSDASQL" for linked server "CWMPDTA" returned message "[IBM][System i Access ODBC Driver]Key value in connection string too long.".
Msg 7303, Level 16, State 1, Line 11
Cannot initialize the data source object of OLE DB provider "MSDASQL" for linked server "CWMPDTA".
Here is the script (from the sql server 2005 (32 bit)) I ran on the sql server 2014 SSMS -- is there anything I need to change? How can I get this I series server to link to my sql server 2014 server?
USE [master]
GO
/****** Object: LinkedServer [CWMPDTA] Script Date: 9/25/2014 10:39:12 AM ******/
EXEC master.dbo.sp_addlinkedserver @server = N'CWMPDTA', @srvproduct=N'cwmpdta', @provider=N'MSDASQL', @datasrc=N'iseries2', @provstr=N'Provider=IBMDA400.DataSource.1;Password=myPwrd;Persist Security Info=True;User ID=myID;Data Source=10.0.0.51;Initial Catalog=T9S', @catalog=N'T9S'
/* For security reasons the linked server remote logins password is changed with ######## */
EXEC master.dbo.sp_addlinkedsrvlogin @rmtsrvname=N'CWMPDTA',@useself=N'False',@locallogin=NULL,@rmtuser=N'myID',@rmtpassword='myPwrd'
GO
EXEC master.dbo.sp_serveroption @server=N'CWMPDTA', @optname=N'collation compatible', @optvalue=N'false'
GO
EXEC master.dbo.sp_serveroption @server=N'CWMPDTA', @optname=N'data access', @optvalue=N'true'
GO
EXEC master.dbo.sp_serveroption @server=N'CWMPDTA', @optname=N'dist', @optvalue=N'false'
GO
EXEC master.dbo.sp_serveroption @server=N'CWMPDTA', @optname=N'pub', @optvalue=N'false'
GO
EXEC master.dbo.sp_serveroption @server=N'CWMPDTA', @optname=N'rpc', @optvalue=N'false'
GO
EXEC master.dbo.sp_serveroption @server=N'CWMPDTA', @optname=N'rpc out', @optvalue=N'false'
GO
EXEC master.dbo.sp_serveroption @server=N'CWMPDTA', @optname=N'sub', @optvalue=N'false'
GO
EXEC master.dbo.sp_serveroption @server=N'CWMPDTA', @optname=N'connect timeout', @optvalue=N'0'
GO
EXEC master.dbo.sp_serveroption @server=N'CWMPDTA', @optname=N'collation name', @optvalue=null
GO
EXEC master.dbo.sp_serveroption @server=N'CWMPDTA', @optname=N'lazy schema validation', @optvalue=N'false'
GO
EXEC master.dbo.sp_serveroption @server=N'CWMPDTA', @optname=N'query timeout', @optvalue=N'0'
GO
EXEC master.dbo.sp_serveroption @server=N'CWMPDTA', @optname=N'use remote collation', @optvalue=N'true'
GO
Rich PThank you for this reply. I went to the link and selected the option for DB2s and ran the install. Then I started up SSMS. I copied the same script as above, and it executed successfully. But when I try to run a query against
a table in a database on this linked sever -- I get this error message:
OLE DB provider "MSDASQL" for linked server "CWMPDTA" returned message "[Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failed".
OLE DB provider "MSDASQL" for linked server "CWMPDTA" returned message "[IBM][System i Access ODBC Driver]Key value in connection string too long.".
Msg 7303, Level 16, State 1, Line 8
Cannot initialize the data source object of OLE DB provider "MSDASQL" for linked server "CWMPDTA".
Do I need to change the line containing -- @provider=N'MSDASQL', maybe?
this is the query I'm running:
select TOP 10 * from CWMPDTA.T9S.CWMPDTA.INSKU
The same exact query runs fine on the sql server 2005 linked server. Is there something I need to configure?
Rich P
Maybe you are looking for
-
Is it possible to set a song in my itunes library as a ringtone straight from my phone, without having to use my computer?
-
From the amount of posted unanswered questions like mine one should be able to see that there are more than a few people confused about the greyed out "Change keys, tempo in Soundtrack Pro" (and for that matter in Apple Loops Utility, Logic, GarageBa
-
Hi everyone, I have a little big problem that I am hoping you can all help me with. I am updating a RFC in XI. I have imported the function module into XI with the correct parameters, added the mapping to include the additional parameters. I have
-
Post Author: timg CA Forum: General I work often with crosstabs, but this one stumps me. I have two files linked on ID. File A (with 1,000 records) has only the IDs of those customers who have paid. File B contains records of all customers (100,000)
-
Doubt about emctl resetTZ agent
Hi, I just have run this command: emctl resetTZ agentI had to run it because a customer changed the computer's time zone (windows server 2008 R2 64bits) where weblogic 10.3.4 and forms 11.1.1.4 are installed and is unable to start the EMAGENT process