SQL Server is unable to connect to the server-Replication

Hello everyone,
Today I found one strange issue, when I tried to add new publisher Database in Transactional Replication I found the following error message.
Does anyone knows how to resolve this?
Also I checked the server name , when the time of Initial configuration I given the same server name not the IP. No clue why I got this issue, could you guys please explain to resolve this.
Thanks Guys

Verify your instance name again:
select @@servername
go
sp_helpserver
go
select serverproperty('servername')
go
If it does not reflect right name you might have to rename:
https://msdn.microsoft.com/en-us/library/ms143799.aspx
http://beyondrelational.com/modules/2/blogs/88/Posts/18241/sql-server-is-unable-to-connect-to-server-servername-error-while-setup-replication.aspx

Similar Messages

Unable to connect to the 2014 SQL Developer's Edition Report Server

Hello,
I have been through the wringer trying to gain access to my report service. I have to admit that I am something of a neophyte with regards to SQL Server but I am pretty good with Windows 7 management in general. I have just installed
SQL 2014 Developer's Edition under Windows 7 SP1. I have connected to the database engine server and loaded a couple of databases. I chose windows authentication and can get into the report configuration manager and the SQL server configuration
manager with no problems. I have registered the URLs for both the web and report manager. I can connect to all of the other instances (database engine, analysis services, and integration services). I have to run with administrator privileges
to connect to the integration services but it does not make any difference when attempting to connect to the reporting service either through report builder 3 or connect through object explorer. I can find no relevant errors in the RS log even after
enabling logging. I have been through many of the articles I could find online but nothing seems to resolve the problem. When connecting it shows Windows Authentication and the correct domain\user. I also browse to find the service so the
URL should be correct. The error that I am getting is as follows:
"Unable to connect to the server at CALYSTO\ReportService. The specified URL might not be valid or there might be a problem with the report server version or configuration. Specify a different URL, or contact your server administrator to verify that
the report server runs SQL Server 2008 or later. Additionally, if you are trying to connect to a SharePoint-integrated report server, verify that SharePoint is installed on the server and that the report server uses SharePoint integrated mode. (Microsoft.SqlServer.Management.UI.RSClient)"
Program Location:
at Microsoft.SqlServer.Management.UI.RSClient.RSClientConnection.CreateConnection()
at Microsoft.SqlServer.Management.UI.RSClient.RSConnectionInfo.GetRSConnectionObject(Boolean ensureOpenConnection)
at Microsoft.SqlServer.Management.UI.RSClient.RSConnectionInfo.RSTypeImpl.ProceedWithConnection(UIConnectionInfo ci)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.RSType.Microsoft.SqlServer.Management.UI.ConnectionDlg.IServerType.ProceedWithConnection(UIConnectionInfo ci)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
I have tried fixing the installation with the installation disk, removing the report service instance and reinstalling it, using the administrator account instead of mine (with is of course an administrator). I'm at a loss right now. I have spent
about 12 hours trying to track this down and so far nothing has worked. I'm about ready to reinstall the entire operating system and start all over. I thought that I would try this venue before going to that extreme.
Any thoughts, questions, or ideas would be much appreciated.
Thanks,
-Tom
Tom L

"Unable to connect to the server at CALYSTO\ReportService.
Hello Tom,
It should be "ReportServer" in the URL, not "ReportService".
In "Reporting Service Configuration Manager" look up the correct URL. Open Internet Explorer with right-mouse click => "Run as Administrator" and open the URL, this should work. Navigate to "Side setting" (on top right side),
go to tab "Security" and add your account with role "System Administrator". Afterwards you should be able to open the URL without running IE as admin.
Olaf Helper
[ Blog] [ Xing] [ MVP]

Service cannot be started. Microsoft.VirtualManager.DB.CarmineSqlException: Unable to connect to the VMM database. Ensure that the SQL Server is running and configured correctly

Hi All,
I am setting up SCVMM 2012 R2 in a production environment. Whenever I restart the SCVMM virtual machine the VMM service doesn't start automatically, I have to manually start it. I checked the VMM logs and in the event viewer i find the below error,
Service cannot be started. Microsoft.VirtualManager.DB.CarmineSqlException: Unable to connect to the VMM database. Ensure that the SQL Server is running and configured correctly. ---> System.Data.SqlClient.SqlException: Cannot open database "VirtualManagerDB"
requested by the login. The login failed. Login failed for user 'NXTRA\VMMSVC'. at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject
stateObj, Boolean callerHasConnectionLock, Boolean asyncClose) at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean&
dataReady) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.Sq...
I added the 'VMMSVC' account as db_owner and sysadmin and also NT_Authority\System with same permissions still the service doesn't start on the start up.
I googled a lot and I find the threads with the error containing "General failure" but not with the above. Can someone please help me to find out why this error is occuring.
Thanks,
Ravi

It's often only a problem of the service dependencies. SCVMM starts to fast, SQL server on the same machine in not initialized yet. Here are working service dependencies to ensure SQL server is initializes before SCVMM starts.
You can set the service dependencies directly in regedit (as always: be careful modifying the registry ...)
Here is the content of a reg file setting the dependency.
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\SCVMMService]
"DependOnService"=hex(7):53,00,51,00,4c,00,53,00,45,00,52,00,56,00,45,00,52,00,\
41,00,47,00,45,00,4e,00,54,00,00,00,53,00,51,00,4c,00,42,00,72,00,6f,00,77,\
00,73,00,65,00,72,00,00,00,53,00,51,00,4c,00,57,00,72,00,69,00,74,00,65,00,\
72,00,00,00,4d,00,53,00,53,00,51,00,4c,00,46,00,44,00,4c,00,61,00,75,00,6e,\
00,63,00,68,00,65,00,72,00,00,00,00,00

Sharepoint Integrated SQL Reporting - Unable to connect to the server that is specified......

This is driving me crazy. I have Reporting services implemented on several sites in Sharepoint. For some reason just one site refuses to work. I see all the features are there. I can create data sources.
When I try to create a report I get :
"Unable to connect to the server that is specified in the URL,
http://help.site. Make sure that the server is running, the URL is correct, and you have permission to use the server"
I'm using my domain admin account, I know know this works on every other site. I know I haven't forgotten the general setup of the service.
The only difference is this site allows "anonymous" connections. Has anyone heard of an issue about using anon and reporting services? Either way I authenticate before I login but that doesn't have an effect.
David Jenkins

Thank you forums!!!!
I found an existing thread.
http://social.technet.microsoft.com/Forums/en-US/sharepoint2010setup/thread/d815b9fb-3431-490d-bd51-e7e21fcb788e
1) Opened up IIS
2) Expanded my intranet folder
3) Expanded _vti_bin
4) Highlighted "ReportServer"
5) Double Clicked on Authentication
6) Disabled "Anonymous Access" to the reporting folder itself
7) Opened report builder 3.0 and typed in http://intranet.company.com" BOOM instant connection :D
David Jenkins

"unable to connect to the data access service" installing report server

Trying to do a 2 server SCOM 2012 R2 install on Server 2012 w/SQL 2012. Management server and operations console on one, and SQL, web console, and reporting server on the other. When I get to the web console and reporting server install, and
the "Specify Management Server" screen, I input the 1st management server name and it gives me a red X with the message:
"Unable to connect to the Data Access service for this management server. Ensure the Data Access service is running and that the service, the management group, and setup are all the same version."
Here is the setup log error:
"Info: :Could not connect to Management Server: scom-app with exception: Threw Exception.Type: System.ArgumentException, Exception Error Code: 0x80070057, Exception.Message: Version string portion was too short or
too long."
I don't see the "Data Access" service in services on either server. I followed all of the setup prereqs in SCOM 2012 unleashed book, and also referenced this article for setup advice:
http://blogs.technet.com/b/kevinholman/archive/2013/01/16/opsmgr-2012-sp1-quickstart-deployment-guide.aspx
Everything seems to be working until I get to this point.
Thank you for any help you can provide,
Dan

Hi Tom,
1. Did the setup complete successfully on the MS and Console server?
>>>Yes, without issue
2. You do not see the service "System Center Data Access Service"
>>>I do indeed see it on the MS and Console server, it is set to Auto and running. (I also tried rebooting this server and retried, no help)
3. Is the Windows Firewall enabled?
>>>It has symantec endpoint protection. I disabled symantec completely on both servers and retried, no help.
Thx,
Dan

SSRS 2012 with SharePoint 2010: Unable to connect to the remote server

We had originally installed SSRS 2012 with SP 2010 and I did not like how the installation was configured, so we uninstalled everything and removed the SSRS server from the SharePoint farm and uninstalled all the SQL bits (SSRS was deployed to web tier in
sharepoint mode).
I've since added a new application server to host the SSRS SharePoint Mode and Installed the reporting services add-in on the WFE. For reference, I have 1 WFE and 2 App Servers. the WFE has the Reporting Service Add-in and both App Servers have
the SharePoint mode of SSRS installed as described here: https://msdn.microsoft.com/en-us/library/hh479774(v=sql.110).aspx
I've also installed the Service Application and all seems to work well up until I make an attempt to create a report or data source on the WFE.
It looks like somewhere, the WFE is still looking to connect to the original SSRS machine we installed. I've gone through registry, config files and the SharePoint config database to see if I can see where the reference value is. Still can't
find it anywhere. None of the Reporting commandlets are helping.
Technically what is occurring;
Add Reporting service content types and create a New Reporting Data Source through UI
ULS Logs go after the url: /_layouts/ReportServer/NewSharedDataSource.rsds
Exception occurs after some time because it times out trying to connect to wrong host. Exception below:
Exception encountered for SOAP method GetSystemProperties: System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond <WRONG HOST IP>:80
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception) -
-- End of inner exception stack trace ---
at Microsoft.SqlServer.ReportingServices2010.RSConnection2010.SetConnectionProtocol()
at Microsoft.SqlServer.ReportingServices2010.RSConnection2010.SoapMethodWrapper`1.ExecuteMethod(Boolean setConnectionProtocol)
No powershell commands or any of the settings in the service application allow me to set this. Any help would be appreciated.
20 Bay Windows Home Server (Not Vail!)
http://piroozjavan.blogspot.com/

Issue an iisreset on the WFE, and validate that SSRS Service is running on the App servers.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

The WSUS administration console was unable to connect to the WSUS Server via the remote API. (Server 2k8)

I have installed a new server for WSUS on Server 2k8, This is a stand alone server on Internet No client system is connected on this server as I have to copy these updates to my LAN which never connects to internet. (Previously I was using server 2k3. for
online & server 2008 on my LAN , now I have changed the server for Online)
Wsus has finished the synchronization & downloaded updates of around 67GB & its downloading more updates. The server shows me some updates are waiting to approved. but when I click the link for those updates I get following error message.
error code is as follows -
The WSUS administration console was unable to connect to the WSUS Server via the remote API.
Verify that the Update Services service, IIS and SQL are running on the server. If the problem persists, try restarting IIS, SQL, and the Update Services Service.
System.Net.WebException -- The operation has timed out
Source
System.Web.Services
Stack Trace:
   at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request)
   at System.Web.Services.Protocols.HttpWebClientProtocol.GetWebResponse(WebRequest request)
   at Microsoft.UpdateServices.Internal.DatabaseAccess.ApiRemotingCompressionProxy.GetWebResponse(WebRequest webRequest)
   at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
   at Microsoft.UpdateServices.Internal.ApiRemoting.ExecuteSPSearchUpdates(String updateScopeXml, String preferredCulture, Int32 publicationState)
   at Microsoft.UpdateServices.Internal.DatabaseAccess.AdminDataAccessProxy.ExecuteSPSearchUpdates(String updateScopeXml, String preferredCulture, ExtendedPublicationState publicationState)
   at Microsoft.UpdateServices.Internal.BaseApi.Update.SearchUpdates(UpdateScope searchScope, ExtendedPublicationState publicationState, UpdateServer updateServer)
   at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.GetUpdates(UpdateScope searchScope)
   at Microsoft.UpdateServices.UI.AdminApiAccess.UpdateManager.GetUpdates(ExtendedUpdateScope filter)
   at Microsoft.UpdateServices.UI.AdminApiAccess.BulkUpdatePropertiesCache.GetAndCacheUpdates(ExtendedUpdateScope updateScope, ComputerTargetScope computerTargetScope)
   at Microsoft.UpdateServices.UI.SnapIn.Pages.UpdatesListPage.GetListRows()
I Have tried desabling the firewall,disabling the antivirus protection. Tried by changing the default rule Please Help.

Hi Sagar,
First, please check if the RAM is exhausted. When there is not enough RAM, this issue may occurs.
Please try to run iisreset on the WSUS server, then try to reconnect.
Also, please try to run the server cleanup wizard to remove the unused update.
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

SCVMM 2012: Unable to connect to the VMM management server localhost:8100

Hi everyone
I have difficulties connecting with the Admin UI to the SCVMM server running on the same machine. This is the error message I see:
Unable to connect to the VMM management server localhost. The Virtual Machine Manager service on that server did not respond.
Verify that Virtual Machine Manager has been installed on the server and that the Virtual Machine Manager service is running.
Then try to connect again. If the problem persists, restart the Virtual Machine Manager service.
ID: 1602
I checked that the service is running and checked with the Resource Monitor that vmmservice.exe is really listening on port 8100. The Resource Monitor also shows some traffic between itself, the service and the DC. But all traffic dies down after a few seconds,
then nothing happens for a minute, then I get the above error message. The only SCVMM related entry in the eventlog is this (was logged when I manually tried restarting the service):
Failed to stop service. System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.VirtualManager.Engine.VirtualManagerService.OnStop()
at System.ServiceProcess.ServiceBase.DeferredStop()
But I guess that entry is of no help. Other important things that might be relevant:
This installation worked fine three months ago. Since then only the automatic updates were installed.
DPM (the 2012 CTP for Win8) is installed on the same server.
After it didn't work I installed SQL Server 2008 R2 SP1 (offered by Microsoft Update)
SCVMM is part of a small test installation (~10 VMs or so), no valuable data, so there's no risk when messing around
Control panel shows the version number 3.1.1042.0 for "Microsoft System Center 2012 Virtual Machine Manager".
Is there anything else I could try? How can SCVMM stop to work, all by itself? Leaves a sour taste...
Cheers,
Simon

When such odd behaviour occur, it is a good tip to start a VMM trace to see where things are actually going wrong. And suck files is interestin for MS support once the obvious things for errors, are eliminated out of the picture.
VMM has dependencies such as SQL, permissions and service accounts. All of these variables does
also have dependencies that should be verified. Verify that the account for the service does is not locked/expired pwd, that the SQL is up and running - and actually is working. There is a lot of logs to check in order to determine the root cause of
this behaviour.
-kn
Kristian (Virtualization and some coffee: http://kristiannese.blogspot.com )

Unable to connect to the Data Access service for this management server

Hate to raise a sleeping horse but was hoping someone might have some insight into why SCOM Report Server install is failing. I am using a domain account for SCOM 2012 R2 services in a distributive environment
with 2 management servers and 2 SQL servers…one for Ops db and one for DW db.
Install was failing on selecting the management server. Research led me to
Kevin Holman's site. I followed his doc and SPN are set per your config and can telnet to MGMT1 on 5723…firewall is off on all servers. I am a domain admin and scom.mgmt account (MSOMSdkSvc) is a local admin on the MGMT servers.
>setspn -l domain\scom.mgmt
Registered ServicePrincipalNames for CN=scom.mgmt,OU=Service Accounts,DC= domain,DC=net:
MSOMSdkSvc/SCOM-MGMT1
MSOMSdkSvc/SCOM-MGMT1.domain.net
MSOMSdkSvc/SCOM-MGMT2
MSOMSdkSvc/SCOM-MGMT2.domain.net
>setspn -l domain\scom-mgmt1
Registered ServicePrincipalNames for CN=SCOM-MGMT1,OU=SCOM,OU=INTERNAL,DC=domain,DC=net:
MSOMHSvc/SCOM-MGMT1.domain.net
TERMSRV/SCOM-MGMT1.domain.net
WSMAN/SCOM-MGMT1.domain.net
RestrictedKrbHost/SCOM-MGMT1.domain.net
HOST/SCOM-MGMT1.domain.net
MSOMHSvc/SCOM-MGMT1
TERMSRV/SCOM-MGMT1
WSMAN/SCOM-MGMT1
RestrictedKrbHost/SCOM-MGMT1
HOST/SCOM-MGMT1
>setspn -l domain\scom-mgmt2
Registered ServicePrincipalNames for CN=SCOM-MGMT2,OU=SCOM,OU=INTERNAL,DC=domain,DC=net:
MSOMHSvc/ SCOM-MGMT2.domain.net
MSOMHSvc/ SCOM-MGMT2
WSMAN/SCOM-MGMT2.domain.net
WSMAN/SCOM-MGMT2
        TERMSRV/SCOM-MGMT2.domain.net
TERMSRV/SCOM-MGMT2
RestrictedKrbHost/SCOM-MGMT2
HOST/CHH-SCOM-MGMT2
RestrictedKrbHost/CHH-SCOM-MGMT2.osi-asp.net
HOST/CHH-SCOM-MGMT2.osi-asp.net
>setspn -l domain\scom-ssrs
Registered ServicePrincipalNames for CN=SCOM-SSRS,OU=SCOM SQL,OU=SCOM,OU=CHH-INTERNAL,DC=domain,DC=net:
    WSMAN/SCOM-SSRS
WSMAN/SCOM-SSRS.domain.net
MSSQLSvc/SCOM-SSRS.domain.net
MSSQLSvc/SCOM-SSRS.domain.net:1433
    TERMSRV/SCOM-SSRS.domain.net
TERMSRV/SCOM-SSRS
RestrictedKrbHost/SCOM-SSRS
  HOST/SCOM-SSRS
RestrictedKrbHost/SCOM-SSRS.domain.net
HOST/SCOM-SSRS.domain.net
When I point to the MGMT server, I keep getting “Unable to connect to the Data Access service for this management server. Ensure the Data Access service is running and that the service, the management group, and setup are
all the same version”.
OpsMgrSetupWizard.log states…
Info:
:Could not connect to Management Server: scom-mgmt1.domain.net with exception: Threw Exception.Type: System.ArgumentException, Exception Error Code: 0x80070057, Exception.Message: Version string portion was too short or
too long.
Info:
:StackTrace:   at System.Version.TryParseVersion(String version, VersionResult& result) at System.Version..ctor(String version) at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupHelpers.IsManagementServerCurrentVersion(String
managementServer) at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupHelpers.CanConnectToManagementGroup(String managementServer)
When I searched on "Exception.Message: Version string portion was too short or too long" it led me to .Net strings in the reg. i deleted all refs to older versions (3.x) but still no good.
Bob

Well, I’m back to trying to get SCOM Report Server up and running. This time I decided to try the command line silent install and rely on logs to debug. But it still fails.
This is the script: SETUP /install /InstallPath:D:\Program Files\Microsoft System Center 2012 R2\Operations Manager /components:OMReporting /ManagementServer:<server>.<domain> /SRSInstance:<instance> /DataReaderUser:<domain>\<account>
/DataReaderPassword:******** /SendODRReports:0 /UseMicrosoftUpdate:0 /AcceptEndUserLicenseAgreement:1
When I run the script, I get a pop-up: “System CenterOperations Manager Setup has stopped working with the following:
Problem signature:
Problem Event Name:
CLR20r3
Problem Signature 01:
setupchainerui.exe
Problem Signature 02:
7.0.5000.0
Problem Signature 03:
522a5b85
Problem Signature 04:
mscorlib
Problem Signature 05:
4.0.0.0
Problem Signature 06:
53b4fc1e
Problem Signature 07:
e4d
Problem Signature 08:
5a
Problem Signature 09:
System.FormatException
OS Version:
6.1.7601.2.1.0.274.10
Locale ID:
1033
Additional Information 1:
4911
Additional Information 2:
49111a576c61a461b7f2900e4224563c
Additional Information 3:
a1e6
Additional Information 4:
a1e62e9c159c1d7601a31ccff83dbf94
App Event Log:
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name=".NET Runtime" />
<EventID Qualifiers="0">1026</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-01-29T19:02:39.000000000Z" />
<EventRecordID>4999</EventRecordID>
<Channel>Application</Channel>
<Computer>SERVER NAME</Computer>
<Security />
</System>
- <EventData>
<Data>Application: SetupChainerUI.exe Framework Version: v4.0.30319 Description: The process was terminated due to an unhandled exception.
Exception Info: System.FormatException Stack: at Microsoft.SystemCenter.Essentials.SetupFramework.Program.Main()</Data>
</EventData>
</Event>
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-01-29T19:02:41.000000000Z" />
<EventRecordID>5000</EventRecordID>
<Channel>Application</Channel>
<Computer>SERVER NAME</Computer>
<Security />
</System>
- <EventData>
<Data>SetupChainerUI.exe</Data>
<Data>7.1.10226.0</Data>
<Data>522a5b85</Data>
<Data>KERNELBASE.dll</Data>
<Data>6.1.7601.18409</Data>
<Data>5315a05a</Data>
<Data>e0434352</Data>
<Data>000000000000940d</Data>
<Data>a64</Data>
<Data>01d03bf626a03a7a</Data>
<Data>C:\Users\USER NAME\AppData\Local\SCOM\Setup\SetupChainerUI.exe</Data>
<Data>C:\Windows\system32\KERNELBASE.dll</Data>
<Data>65be21be-a7e9-11e4-a4d7-005056966e1b</Data>
</EventData>
</Event>
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Windows Error Reporting" />
<EventID Qualifiers="0">1001</EventID>
<Level>4</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-01-29T19:03:27.000000000Z" />
<EventRecordID>5001</EventRecordID>
<Channel>Application</Channel>
<Computer>SERVER NAME</Computer>
<Security />
</System>
- <EventData>
<Data />
<Data>0</Data>
<Data>CLR20r3</Data>
<Data>Not available</Data>
<Data>0</Data>
<Data>setupchainerui.exe</Data>
<Data>7.0.5000.0</Data>
<Data>522a5b85</Data>
<Data>mscorlib</Data>
<Data>4.0.0.0</Data>
<Data>53b4fc1e</Data>
<Data>e4d</Data>
<Data>5a</Data>
<Data>System.FormatException</Data>
<Data />
<Data />
<Data>C:\ProgramData\Microsoft\Windows\WER\ReportArchive\AppCrash_setupchainerui.e_9724aaa8eec4ffba07c27fea369e612e949d75_5b269652</Data>
<Data />
<Data>0</Data>
<Data>65be21be-a7e9-11e4-a4d7-005056966e1b</Data>
<Data>0</Data>
</EventData>
</Event>
OpsMgrSetupWizard.log
[13:48:16]:
Error:     :Uncaught Exception: Threw Exception.Type: System.FormatException, Exception Error Code: 0x80131537, Exception.Message: Input string was not in a correct format.
[13:48:16]:
Error:     :StackTrace:
at System.Number.StringToNumber(String str, NumberStyles options, NumberBuffer& number, NumberFormatInfo info, Boolean parseDecimal)
   at System.Number.ParseInt32(String s, NumberStyles style, NumberFormatInfo info)
   at System.Convert.ChangeType(Object value, Type conversionType, IFormatProvider provider)
   at Microsoft.SystemCenter.Essentials.SetupFramework.PropertyBagDictionary.GetProperty[T](String property)
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupHelpers.ValidateBureaucraticSwitches()
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.RationalizeCommandLineArguments.ValidateSilentInstallCommandLineOptions()
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.RationalizeCommandLineArguments.Rationalize()
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupHelpers.RationalizeGeneralInstall()
   at Microsoft.SystemCenter.Essentials.SetupFramework.Program.RationalizeInstall()
   at Microsoft.SystemCenter.Essentials.SetupFramework.Program.Main()
Any ideas? I feel like I’m just going in circles…Bob

Server cleanup wizard problem - unable to connect to the WSUS Server Database.

I'm trying to run server cleanup wizard.. it starts to run and then after a while it gives me this error:
The WSUS administration console was unable to connect to the WSUS Server Database.
Verify that SQL server is running on the WSUS Server. If the problem persists, try restarting SQL.
System.Data.SqlClient.SqlException -- Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
The statement has been terminated.
Source
.Net SqlClient Data Provider
Stack Trace:
   at Microsoft.UpdateServices.Internal.BaseApi.SoapExceptionProcessor.DeserializeAndThrow(SoapException soapException)
   at Microsoft.UpdateServices.Internal.DatabaseAccess.AdminDataAccessProxy.ExecuteSPSearchUpdates(String updateScopeXml, String preferredCulture, ExtendedPublicationState publicationState)
   at Microsoft.UpdateServices.Internal.BaseApi.Update.SearchUpdates(UpdateScope searchScope, ExtendedPublicationState publicationState, UpdateServer updateServer)
   at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.GetUpdates(UpdateScope searchScope)
   at Microsoft.UpdateServices.UI.AdminApiAccess.UpdateManager.GetUpdates(ExtendedUpdateScope filter)
   at Microsoft.UpdateServices.UI.AdminApiAccess.WsusSynchronizationInfo.InitializeDerivedProperties()
   at Microsoft.UpdateServices.UI.AdminApiAccess.WsusSynchronizationInfo.get_NewUpdatesCount()
   at Microsoft.UpdateServices.UI.SnapIn.Pages.SyncResultsListPage.GetSyncInfoRow(WsusSynchronizationInfo syncInfo)
   at Microsoft.UpdateServices.UI.SnapIn.Pages.SyncResultsListPage.GetListRows()
Thanks

Some questions:
Are there any other databases running on this Std Edition SQL service?
[a] Yes there are, we have Kaspersky enterprise DB, Report Server DB and local application DB.
Are there any other services running on this WSUS Server?
[b] Yes there are, we have Active Directory, Kaspersky enterprise, SQL Server 2005, and WSUS all on the same server.
How many days since your WSUS server was first installed?
[c] It's been about a year now.
What is the physical size of the SUSDB.mdf file?
[d] 9,666,752 KB
What is the hardware configuration of this machine, including disk drives?
[e] Intel Xeon 1.86, 2GB Ram, HD C: 39GB - E: 25.2, running Windows Server 2003 R2 SP2.
How many client systems are you servicing from this WSUS Server?
[f] Around 40.
What products/classifications are you synchronizing.
[g] Windows XP-vista, Windows Server 2003, Office 2003-2007, SQL Server 2005.
Okay, for starters, you have an underpowered/overextended machine running Active Directory, ASP.NET, and a database server, all on a sub 2GHz CPU with 2GB RAM, and not enough disk spindles. The machine has had WSUS running for about a year and is 9GB in size.
There's no doubt in my mind that some of your performance issues are directly related to disk and database fragmentation.
There's also no doubt that some of your performance issues are directly related to memory starvation.
I'd suggest the following long-term fixes:
1. Get a second machine. Make it a dedicated database server. Provision it accordingly to support servicing multiple database applications.
2. Lacking #1, this machine needs more memory. It also needs more disk spindles. At a minimum the databases being serviced should be on a dedicated physical drive; ideally there would be two dedicated drives allocated for supporting database services. The
For the short-term fixes, do this:
1. During after-hours time, if you don't already have one, build a temporary machine that can act as a DC/GC, while you take this machine temporarily offline.
1. Shutdown the Update Services service, SQL Server database engine, and any other services dependent on the SQL Server database engine (Kapersky, and other reporting applications). Disconnect from the network to temporarly eliminate DC traffic. (You could also shutdown the AD services, but disconnecting the network cable is ever-so-much easier.) Defragment ALL drives.
2. Restart ONLY the SQL Server service. Obtain this SQL script to Reindex the WSUS Databases.
3. Restart ONLY the Update Services service. Attempt the Server Cleanup Wizard again. Run it in two passes. Pass 1 performing everything except remove unused updates. Pass 2 running only remove unused updates.
4. After completion of the Server Cleanup Wizard, reconnect the machine to the network and resume all other services.
5. If you're able to complete #3, secure the services of a well-qualified DBA to determine if there are any misconfigurations in your SQL Server setup that would account for why your WSUS database is 9GB in size -- such as improperly configured autogrowth parameters. Based on the products you're updating and only forty clients, 9GB is about 3x the maximum size I would expect to see in a WSUS database. It's possible this is simply caused by excess unused updates, it's possible it's caused by fragmentation, it's probable it was caused by unnecessary autogrowth of the database due to insufficient update maintenance. You'll want a DBA to assist you in shrinking that database after you successfully run the Database Maintenance and Server Cleanup Wizard.
Lawrence Garvin, M.S., MCITP(x2), MCTS(x5), MCP(x7), MCBMSP
Principal/CTO, Onsite Technology Solutions, Houston, Texas
Microsoft MVP - Software Distribution (2005-2009)

Unable to connect to the report server

I have a problem with run_report_object to call a report within a form. I am using 9ias Rel 2 and report server on the same machine. The test.rdf report can be executed using the URL in the browser.
I get the "Unable to connect to the report server" when I use the run_report_object in a form. Is it a configuration problem or is the code incorrrect?
My code is as follows:
Declare
repid report_object;
report_job_id VARCHAR2(200);
PL_ID PARAMLIST;
rep_status varchar2(100);
Begin
repid := FIND_REPORT_OBJECT('OP201P');
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_EXECUTION_MODE, BATCH);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_COMM_MODE, SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_DESTYPE, CACHE);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_DESFORMAT,'pdf');
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_SERVER,'repsrv');
PL_ID := CREATE_PARAMETER_LIST('TEMP');
ADD_PARAMETER(pl_id, 'p_ref1', TEXT_PARAMETER,:toolbar.ref1 );
ADD_PARAMETER(pl_id, 'p_ref2', TEXT_PARAMETER,:toolbar.ref2 );
ADD_PARAMETER(pl_id, 'p_sort', TEXT_PARAMETER,:toolbar.p_sort );
report_job_id := RUN_REPORT_OBJECT(repid, pl_id);
rep_status := REPORT_OBJECT_STATUS(report_job_id);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')LOOP
rep_status := REPORT_OBJECT_STATUS(report_job_id);
END LOOP;
IF rep_status = 'FINISHED' THEN
Web.show_document('http://portal.domain_name.com:7778/getjobid='||
substr(report_job_id,9) || '?server=repsrv', '_blank');
ELSE
message('Report failed with error message '|| rep_status);
END IF;
end;
For the show_document, I have tried both ' .. getjobid='|| substr(report_job_id,9)' and
' .. getjobid'|| substr(report_job_id,9)' .
Any help would be greatly appreciated.
Thank You.
Rgds
Edwin

Hi ,
Did you check if TCP/IP is enabled for the SQL Server service.
If Disable you may need to enable it.
To resolve this error, you can either modify the connection string to use the server name or you can enable TCP/IP for the service. Follow these steps to enable TCP/IP:
1) Start SQL Server Configuration Manager.
2) Expand SQL Server Network Configuration.
3) Select Protocols for MSSQLSERVER.
4) Right-click TCP/IP, and select Enable.
5) Select SQL Server Services.
6) Right-click SQL Server (MSSQLSERVER), and select Restart.
Also Check the below link.
Hi ,
Did you check if TCP/IP is enabled for the SQL Server service.
If Disable you may need to enable it.
To resolve this error, you can either modify the connection string to use the server name or you can enable TCP/IP for the service. Follow these steps to enable TCP/IP:
1) Start SQL Server Configuration Manager.
2) Expand SQL Server Network Configuration.
3) Select Protocols for MSSQLSERVER.
4) Right-click TCP/IP, and select Enable.
5) Select SQL Server Services.
6) Right-click SQL Server (MSSQLSERVER), and select Restart.
Also Check the below link if doesn't work from above.
http://msdn.microsoft.com/en-us/library/ms365170.aspx
Regards, PS

There is a problem with the server's security certificate. The security certificate is not from a trusted certifying authority. SAP Business One is unable to connect to the server

Hello,
I have an issue with connecting client SB1H on Windows, the scenario is as follows:
1.- Server:
     Suse Linux Enterprise Server 11.3 kernel version: 3.0.76-0.11 IBM
     NDB and Server are review 69 SP06
2.- Client:
     Windows 8 Pro Virtual Machine on Microsoft Hyper-V
     SB1H PL 11 version 32bits
     SAP HANA Studio version 1.0.60
When I run SB1H the following message appears:
There is a problem with the server's security certificate. The security certificate is not from a trusted certifying authority. SAP Business One is unable to connect to the server.
Any idea what could be the solution?

Hi,
Please check SAP notes:
   1993392 - Server components setup wizard: New default values for certificates and single sign-on option
1929288 - Do not configure SSL for XApp during installation or upgrade if XApp is installed on a different machine than the SAP HANA server
Thanks & Regards,
Nagarajan

[Forum FAQ] "Unable to connect to the server by using Windows PowerShell Remoting" error while installing RDS roles on Server 2012 R2

When you try to install RDS role on server 2012 R2 using standard deployment, this issue may occur (Figure 1).
“Unable to connect to the server by using Windows PowerShell remoting”.
Figure 1: Unable to connect to the server by using Windows PowerShell remoting
First of all, we need to verify the configurations as it suggested:
1. The server must be available by using Windows PowerShell remotely.
2. The server must be joined to a domain.
3. The server must be running at least Windows Server 2012 R2.
4. The currently logged on user must be a member of the local Administrators group on the server.
5. Remote Desktop Services connections must be enabled by using Group Policy.
In addition, we need to check if the “Windows Remote Management “service is running and related firewall exceptions have been created for WinRM listener.
To enabling PowerShell remoting, we can run this PowerShell command as administrator (Figure 2).
Enable-PSRemoting -Force
Figure 2: Enable PowerShell Remoting
However, if issue persists, we need to check whether it has enough memory to work.
By default, remote shell allots only 150 MB of memory. If we have IIS or SharePoint App pool, 150 MB of memory is not sufficient to perform the remoting task. Therefore, we need to increase
the memory via the PowerShell command below:
Set-Item WSMan:\localhost\Shell\MaxMemoryPerShellMB 1000
Then, you need to restart the server and the issue should be resolved.
You can get more information regarding Remote Troubleshooting by below link:
about_Remote_Troubleshooting
If you need further assistance, welcome to post your questions in the
RDS forum.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

i found another possible reason, this solution worked for me:
http://oyvindnilsen.com/solution-for-powershell-remoting-error-it-cannot-determine-the-content-type-of-the-http-response-from-the-destination-computer/
I tried to set up powershell remoting on a server and kept getting this error:
Enter-PSSession : Connecting to remote server failed with the following error message : The WinRM client cann
ot process the request. It cannot determine the content type of the HTTP response from the destination comput
er. The content type is absent or invalid. For more information, see the about_Remote_Troubleshooting Help to
pic.
After a bit of troubleshooting I discovered that the problem was that the authentication packets was to big (over 16k), this will cause WinRM to reject the request. The reason for authentication packets getting too big can be because the user is member of very
many security groups or in my case because of the SidHistory attribute.
The solution was to increase the MaxFieldLength and MaxRequestBytes keys in the registry under HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\HTTP\Parameters
If the keys does not exists you can create them, be sure to use the DWORD type.
I sat MaxFieldLength to DEC value 40000 and MaxRequestBytes to DEC value 32768 and rebooted the server. Problem solved.

HP OfficeJet Pro 8500A Plus "unable to connect to the server"

I have had this printer for a couple years and now it is saying it is unable to connect to the server. The light under the wifi symbol is not lit up and nothing happens when I press that button.
I have restarted the printer, reinstalled the driver, restarted the router ... to no avail.
The router is working properly as my 2 computers are both working.

Hi bhappie,
Welcome to the HP Support forums. I gather that you are unable to connect your Officejet 8500A plus printer to your wireless network.
This printer can be connected by an ethernet cable or connected to your wireless network but cannot support both simultaneously as referenced in the document The Printer Does Not Support Ethernet (Wired) and Wireless Network Connections at the Same Time. To setup the wireless feature you will need to unplug the ethernet cable.
Your wireless printer can be easily connected to your wireless network from the front panel of your printer. If you are unsure how to do this the instructions can be found in your User Guide on page 219 in the section titled “To set up a wireless communication using the Wireless Setup Wizard”.
Now that the printer has a wireless connection, any computer that uses the printer, will need to have the connection method updated. The instructions on how to do this can also be found in your User Guide on page 221 in the section titled “Change the connection method”. There is a sub-section dedicated to Windows operating systems and one dedicated to Mac operating systems.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

I have a ipad mini and it says that it has perect wifi yet when i go into safari it says unable to connect with the server how can i fix this?

I have a ipad mini and i have had it for less then a year, it says that i have perfect wifi up in the left corner where the wifi is always at but when ever i go into the built in safari it says that it is unable to connect with the server. How can i fix this because with out it connecting to the server or internet it is kind of useless to me. I do have ios7 if that helps

The wifi symbol only indicates the presence/signal strength of wifi. Not that you are connected.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

REP-501: Unable to connect to the specified database in Report Server

I Get a 'REP-501: Unable to connect to the specified database' error, when trying to call a report from a button on a Forms 10g application, through a report object:
A portion of the code button:
report_id := find_report_object('REPORT');
set_report_object_property(report_id, report_destype, cache);
set_report_object_property(report_id, report_desformat, 'PDF');
set_report_object_property(report_id, report_server, p_server);
set_report_object_property(report_id, report_filename, 'report.rep');
report_job_id := run_report_object(report_id, lista_p);
rep_status := report_object_status(report_job_id);
job_number := length(servidor_rep) + 2;
WHILE rep_status IN ('RUNNING', 'OPENING_REPORT', 'ENQUEUED') LOOP
rep_status := report_object_status(report_job_id);
END LOOP;
IF rep_status = 'FINISHED' THEN
web.show_document('http://'||server_name||'/reports/rwservlet/getjobid' ||
substr(report_job_id, job_number) || '?server=' || p_server,'_blank');
ELSE
message('Error');
END IF;
The TSNMAMES configured in the OAS is as follows,
LISTENERS_PROD =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = zurquivip.coope.local)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = poasvip.coope.local)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = irazuvip.coope.local)(PORT = 1521))
DB01 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = zurquivip.coope.local)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = poasvip.coope.local)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = irazuvip.coope.local)(PORT = 1521))
(LOAD_BALANCE = yes)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = DB01.COOPE.LOCAL)
(FAILOVER_MODE =
(TYPE = SELECT)
(METHOD = BASIC)
(RETRIES = 180)
(DELAY = 5)
This application does not fail in other databases, only in which I have the problem.
The connection to the database through the SQLPLUS and other applications works well. The error is presented only when calling reports from the application.
Another point is that the problem is presented with some users and not with others even they have the same conditions as roles, profiles, grant objects, etc.
If i run my report with the following url applying directly on address bar of web browser then it run fine on web browser
http://hostname.domain:port/reports/rwservlet?report=myreport.jsp&userid=un/pw@db&destype=cache&desformat=PDF
OAS 10g and Database are on different machines.
Please... any idea about this problem?
Thanks!!

I use a report object, imagine that sends connect information when creating the Job in the reports server.
However the same problem happens if I call to report from the Internet Explorer with all parameters of connectivity, for example;
http://hostname.domain:port/reports/rwservlet?report=myreport.rep&userid=un/pwdb@&destype=cache&desformat=PDF
The only difference in this database is that it is configured in a RAC and as I mentioned the problem occurs with some users and not with others, even if they are identical.
Thank for your help!

SQL Server is unable to connect to the server-Replication

Similar Messages

Maybe you are looking for