SQL statement NOT IN

Hi,
I have this SQL statement as below:
Select data from customer where name = 'John' and customer_id NOT IN (SELECT customer_id from customer where customer_id = '111');
Is it possible to do this or I should modify it?

Hello,
It's possible and it will be produces same result as this, by the query it will return row(s) with name='JOHN' but customerid is not equal to 111.
   select * from customer
                                  where name='JOHN'
                                  and customer_id !=111;Regards

Similar Messages

SQL Statement not allowed

I am using the sender jdbc sender adapter.
I had given the SQL Query:
EXECUTE xyz;
i am getting SQL Exception.
SQL Statement not allowed in adapter monitoring.
Gaurav

Hi,
Which database you are using ?
Are you executing the Stored Procedure ?
check out this for the syntax etc-
http://help.sap.com/saphelp_nw2004s/helpdata/en/7e/5df96381ec72468a00815dd80f8b63/content.htm
Regards,
Moorthy

SQL STATEMENT NOT PROPERLY ENDED - HELP NEEDED

Can anyone tell me the error in this code, I get an error message sql statement not properly ended when I run it.
update MODT set rootobj=(SELECT REF(A) FROM
OR_COMP_T A
WHERE A.ID=O.ID)
AS OR_COMP_T_REF)
FROM OLD_MODT O where id = 1;

Hi, here is the schema and the expected results.
=======================================================================================
CREATE TYPE OR_MODT_OBJ;
CREATE TYPE OR_MODT_OBJ_REF AS TABLE OF REF OR_MODT_OBJ;
=================================================
CREATE OR REPLACE TYPE OR_COMP_T_OBJ
(id number (6),
typ char (4),
SUPERID REF OR_COMP_T_OBJ,
MOD REF OR_MODT_OBJ);
=================================================
CREATE OR REPLACE TYPE OR_COMP_T_REF AS TABLE OF REF OR_COMP_T_OBJ;
=================================================
CREATE TABLE OR_COMP_T OF OR_COMP_T_OBJ
=================================================
CREATE TYPE OR_MODT_OBJ
(id number (6),
typ char (4),
rootobj REF OR_COMP_T_OBJ,
comp_tb     OR_COMP_T_REF);
=================================================
CREATE TABLE MODT OF OR_MODT_OBJ
NESTED COMP_TB STORE AS COMP_TB_NESTED;
=================================================
INSERT INTO OR_MODT (ID,TYP,ROOTOBJ,COMP_TB)
SELECT ID,TYP,NULL,NULL FROM OLD_MODT;
INSERT INTO OR_COMP_T(ID,TYP,SUPERID,MOD)
SELECT ID,TYP,NULL,NULL FROM OLD_OR_COMP_T;
==================================================
There are two rows in OLD_MODT, and these two rows are to be inserted into OR_MODT.
They are:
Sample data in OLD_MODT are:
id,      typ,     rootobj
1     type1     1
2     type3     365
=================================================
Data from OLD_OR_COMP_T is to be inserted into OR_COMP_T as well, and likewise, it has a ref to OR_MODT, so the ref data was not inserted at the same time.
Now OLD_OR_COMP_T has a number of rows but attribute MOD for two of these rows os the rootobj for OR_MODT,
such that:
id     typ     superID     mod
1     type4     NULL     1
2     type2     10101     1
3     type     20202     1
365     type2     NULL     2
366     type2     20202     2
I want to get the ID of OR_COMP_T where ID is 1 and where ID is 365. These values are to be in rootobj.
I also want to get the value of ID in OR_MODT to be placed in MOD of OR_COMP_T.
PLEASE HELP ME.

Sender JDBC adapter -- Update SQL statement NOT work for the last record

I'm trying to use SAP XI to send records from Oracle database to As/400 using JDBC adapter. I've defined the communication channel for sender
(1) The "Query SQL statement" = select a_bgn_dt, a_end_dt from PX_PXXD WHERE NOT CU_ACTION_CD='P'
(2) The "Update SQL statement" = update PX_PXXD set CU_ACTION_CD='P' WHERE NOT CU_ACTION_CD='P'
Supposed that 3 records were retrieved from (1) and successfully updated to AS/400 but only the first 2 records in Oracle database are updated according to (2)
Any advise.
Pansy

Hi Pansy,
You select and update query is looking like wrong
kindly check below query,If you are using oracle
(1) The "Query SQL statement" = select a_bgn_dt, a_end_dt from PX_PXXD WHERE CU_ACTION_CD !='P'
(2) The "Update SQL statement" = update PX_PXXD set CU_ACTION_CD='P' WHERE CU_ACTION_CD !='P'
Thank you
Sateesh

SQL Statement not works using functions or subqueries-MAXDB

Hello All,
I created an ABAP program to select information about country(table: T005) with the country names (Table: T005T). I tried to create a sql query with a sql subquery to select everything but for some reason that I don't know it doesn't work. Please find the query below.
DATA:
resu        TYPE REF TO cl_sql_result_set ,
stmt         TYPE REF TO cl_sql_statement ,
qury        TYPE string .
           qury = `SELECT land1, spras, `
           &&       `(SELECT landx `
           &&         `FROM SAPNSP.T005T `
           &&         `WHERE mandt = '` && sy-mandt && `' `
           &&           `AND spras = 'EN' `
           &&           `AND land1 = ? ), `
           &&       `(SELECT natio `
           &&         `FROM SAPNSP.T005T `
           &&         `WHERE mandt = '` && sy-mandt && `' `
           &&           `AND spras = 'EN' `
           &&           `AND land1 = ? ) `
           &&        `FROM SAPNSP.T005 `
           &&        `WHERE mandt = '` && sy-mandt && `' `
           &&          `AND land1 = ? `
           &&        `GROUP BY land1, spras` .
resu = stmt->execute_query( qury ) .
Well, the query above works but the fields LANDX and NATIO are in blank in ALL THE CASES, even with information registred in table T005T.
So, exploring the SDN forum and after read some documents regarding ADBC, I create a function to handle this sql select and get the correctly the missing informations, but, still don't work. Please find the function below:
CREATE FUNCTION select_landx (land1 CHAR(3)) RETURNS CHAR(15)
AS
VAR landx CHAR(15);
DECLARE functionresult CURSOR FOR
SELECT spras, land1, landx
     FROM SAPNSP.t005t
     WHERE spras = 'EN'
         AND land1 = :land1;
     IF $count IS NULL THEN <- | $count is always 0, my SELECT
       BEGIN                                 it's not work but I don't know why
         CLOSE functionresult;
         RETURN NULL;
       END
     ELSE
       SET $rc = 0;
       WHILE $rc = 0 DO
       BEGIN
         FETCH functionresult INTO :landx;
       END;
     CLOSE functionresult;
     RETURN landx;
Calling the function in a SQL statement:
DATA:
resu        TYPE REF TO cl_sql_result_set ,
stmt         TYPE REF TO cl_sql_statement ,
qury        TYPE string .
           qury = `SELECT land1, spras, select_landx(?) landx `
           &&        `FROM SAPNSP.T005 `
           &&        `WHERE mandt = '` && sy-mandt && `' `
           &&          `AND land1 = ? `
           &&        `GROUP BY land1, spras` .
resu = stmt->execute_query( qury ) .
Any comments ?
Best regards,
Arthur Silva

Hello,
Thank's a lot, it works. It's funny because the given solution works using only abap codes.
It may be happens because the abap interpretor send the sql statement to the db interface that handle the code in the another way.
Thanks again, it was driving me crazy.
Best regards,
Arthur Silva

SQL statement not working for an application

Hello,
Here is a sql statement which i am using to populate Department ID using another row in the table. Using these I am getting the values called department alias from different table and schema.
UPDATE tablename_4127 PT
SET "Deptid" = (select distinct(deptid) from datastore.get_department_alias
where upper(ltrim(rtrim(deptalias))) = upper(ltrim(rtrim(PT."Dept Descr")))
AND "Colid" = PT.COLID)
Please anyone help me with this.
Thank you

HBUA wrote:
Hello,
Here is a sql statement which i am using to populate Department ID using another row in the table. Using these I am getting the values called department alias from different table and schema.
UPDATE tablename_4127 PT
SET "Deptid" = (select distinct(deptid) from datastore.get_department_alias
where upper(ltrim(rtrim(deptalias))) = upper(ltrim(rtrim(PT."Dept Descr")))
AND "Colid" = PT.COLID)
Please anyone help me with this.
Thank youhelp you how, since we don't have your table, data or requirements?
How do I ask a question on the forums?
SQL and PL/SQL FAQ

Sql statement not working with for update

Hi, iam facing an error fetch out of sequence
when iam trying to execute a sql statement
Statement st=con.createStatement();
st.executeQuery(select mycolumn from table where jobno=1 for update);
the statement works well without " for update ".
any solutions????

Hi,
The fetch out of sequence error occurs usually when you are trying to read from a cursor that has no data left(like EOF).
After executing the sql statement move the pointer to the first row (or the beginning of the resultset)
This is actually an oracle error bearing number :ORA:01002
Hope this helps.
Thanks,
Creator Team.

SQL statement not executing

Please enlighten me. This is driving me crazy.
I don't know if this is a database or java code related problem.
JVM: 1.4.2
Database: Oracle 9i
Objective: trying to add a row into a table
Problem: 1. SQL statement never gets executed.
2. Application freezes. I have to terminate it myself.
Any Ideas?
void addCourse(){
try {
    DriverManager.registerDriver ( new oracle.jdbc.driver.OracleDriver () ) ;
   System.out.println("Driver registered"); //---> ok.
Connection conn = DriverManager.getConnection ( dbPath, username, password ) ;
   System.out.println("Connected");   // -----> it connects fine
   ResultSet rset = stmt.getResultSet();
   System.out.println("getting result set"); //-----> gets the resultSet fine
Statement stmt = conn.createStatement();
System.out.println("statement created"); //------> it creates statement
7 = are the credits. Number on table. Length allowed 5.
CS 500 = are the course code. Varchar2 on table. Length allowed 20
Java = Actual course name. Varchar2 on table. Length 30
3 = credits. Number on table. Length 5.
          // Prepare a statement to insert a record
          String sql = "INSERT INTO course VALUES (7 , 'CS 500', 'Java', 3 )"; //-->ok. Tested it manually
          // Execute the insert statement
        stmt.executeUpdate(sql); //----> *** java program freezes right here.***
        System.out.println("sql executed");   //--> Checked table. SQL never gets executed.
catch ( SQLException ex ) {   //---> no error messages thrown.
System.err.println(ex.getMessage());
System.err.println(ex.getErrorCode());
System.err.println(ex.getSQLState());
}

Nothing looks amiss in the code... How long are you waiting before you manually terminate?
Can you replace the executeUpdate() with execute and change the INSERT to a SELECT? Does that work normally (you should be sure to get at least one row to verify that it is working correctly)? Can you select and update a different table in a different tablespace successfully?
Couple of possibilities (I know this is weak):
1) You have hit a deadlock condition because the table is locked by another or same process.
2) You are running into network problems.
3) Your insert is being queued up in Oracle's transaction manager (if configured).
4) Have you tried both the Oracle thin and Oracle OCI driver? Do they both fail without error?
5) Can you turn off autoupdate and try the insert? Does the executeUpdate() return then?

Using EXECUTE IMMEDIATE with Create Table SQL Statement not working

Hi ,
I am all the privileges given from the SYSTEM user , but still i am not able to create a table under procedure . Please see these and advice.
create or replace procedure sp_dummy as
begin
Execute Immediate 'Create table Dummy99_99 (Dummy_Field number)';
end;
even i tried this way also
create or replace PROCEDURE clearing_Practise(p_file_id in varchar2, p_country in VARCHAR2,p_mapId in VARCHAR2)
AUTHID CURRENT_USER AS
strStatusCode VARCHAR2(6);
BEGIN
EXECUTE IMMEDIATE 'create table bonus(name varchar2(50))';
commit;
EXCEPTION
WHEN OTHERS THEN
dbms_output.put_line('ERROR Creating Table');
END ;

William Robertson wrote:
Since the syntax is correct, my guess is you do not have CREATE TABLE system privilege granted directly to your account. A common scenario is that you have this privilege granted indirectly via a role, allowing you to create tables on the command line, but stored PL/SQL is stricter and requires a direct grant and therefore the procedure fails with 'insufficient privileges'.A bit like he's already been told on his first thread...
Using of Execute Immediate in Oracle PLSQL
Generally you would not create tables from stored PL/SQL. Also as you have found out, it's best not to hide exceptions with 'WHEN OTHERS THEN [some message which gives less detail than the one generated by Oracle]'.Again like he was told on the other thread.
There's just no telling some people eh! :)

Sql statement not showing right result set

Hi everyone,
I have a statement :
select to_date(extract (day from to_date(begin_datum,'yyyy-mm-dd'))||'-'||extract (month from to_date(begin_datum,'yyyy-mm-dd'))||'-'||
extract(year from sysdate),'dd-mm-yyyy') from fus_medewerkers;
which returns following result:
12-FEB-09
07-DEC-09
22-NOV-09
21-MAY-09
26-FEB-09
17-DEC-09
01-SEP-09
17-DEC-09
04-APR-09
07-JUN-09
23-MAY-09
29-MAY-09
13-AUG-09
18-MAR-09
01-NOV-09
12-AUG-09
06-JAN-09
01-MAR-09
02-AUG-09
16-AUG-09
06-NOV-09
23-MAR-09
06-MAY-09
01-NOV-09
01-MAR-09
16-AUG-09
01-JAN-09
01-DEC-09
01-OCT-09
01-OCT-09
01-OCT-09
01-APR-09
01-APR-09
08-DEC-09
01-APR-09
01-AUG-09
14-JUN-09
02-JUL-09
01-APR-09
10-JAN-09
15-MAR-09
07-APR-09
29-JAN-09
16-JUN-09
21-OCT-09
I now put a condition in my original statement as follow:
select to_date(extract (day from to_date(begin_datum,'yyyy-mm-dd'))||'-'||extract (month from to_date(begin_datum,'yyyy-mm-dd'))||'-'||
extract(year from sysdate),'dd-mm-yyyy') from fus_medewerkers
where sysdate <= to_date(extract (day from to_date(begin_datum,'yyyy-mm-dd'))||'-'||extract (month from to_date(begin_datum,'yyyy-mm-dd'))||'-'||
extract(year from sysdate),'dd-mm-yyyy');
The result is:
07-DEC-09
22-NOV-09
17-DEC-09
01-SEP-09
17-DEC-09
13-AUG-09
01-NOV-09
16-AUG-09
06-NOV-09
01-NOV-09
16-AUG-09
01-DEC-09
01-OCT-09
01-OCT-09
01-OCT-09
08-DEC-09
21-OCT-09
As you can see the row with sysdate (12-AUG-09 ) in my first result is not shown in the second result set.
Can someone please tell me why this is so and how I could solve this problem?
Regards,
Diana

sysdate contains time even if it's not shown. e.g. at 14:43:22 on Aug 12th 2009, sysdate would have a value of 12-AUG 2009 14:43:22, but unless you have changed your NLS_DATE_FORMAT setting you would only see the date portion of it.
When comparing a date value to sysdate you may need to truncate one or both values depending on the results you are looking for.
e.g.
the only difference between these two queries is that I truncate sysdate in one of them:
with t1 as (select 1 id, to_date('12-AUG-2009','dd-mon-yyyy') dt from dual
union all select 2, to_date('12-AUG-2009 14:23','dd-mon-yyyy hh24:mi') from dual
select sysdate, t1.* from t1 where sysdate <= dt
SYSDATE                   ID                     DT
12-AUG-2009 11:38:21      2                      12-AUG-2009 14:23:00
1 rows selected
with t1 as (select 1 id, to_date('12-AUG-2009','dd-mon-yyyy') dt from dual
union all select 2, to_date('12-AUG-2009 14:23','dd-mon-yyyy hh24:mi') from dual
select trunc(sysdate), t1.* from t1 where trunc(sysdate) <= dt
TRUNC(SYSDATE)            ID                     DT
12-AUG-2009 00:00:00      1                      12-AUG-2009 00:00:00
12-AUG-2009 00:00:00      2                      12-AUG-2009 14:23:00
2 rows selected

Sql statement from abap query

is there any chance to get the sql statement (not program) from any abap query created via SQ01?
I can get the code of program that generated by system, but I cannot get pure sql statement.
any answer will be appreciated

I see no parameters, and in the abstract that SQL ought to work.
However, I halfway suspect that either User, Users, Password, or pass is a reserved word and somebody is getting confused. Try renaming your columns and table...

Produce report NOT based on a single sql statement

I want to produce a tabular report based on a series of sql statments. Specifically, a report of managers that wil include counts of employees that are in other tables using differing criterias.
Name Count Count
using using
criteria 1 criteria 2
Manager1 35 242
I would expect to write an anonymous pl/sql block with a driving cursor determining the managers to report on. Within that cursor, I would execute a number of other queries to derive the count for each of the two columns.
I have tried creating a report region based on a sql statement, but that requires a single sql statement. I also tried creating a report region based on plsql, but it required an into statement of defined items. This option looks like it can provide multiple rows, but since it selected 'INTO' named fields, it only creates a report with the last row of data.
I must be missing something. Any suggestions are greatly appreciated!!!

If you want a wizard to create the form and report for you then yes you need to have a table. One thing that you can do is define a view that contains the data you need and define an Instead Of trigger on that view so the automatic fetch and dml will work but you can have the data stored into the different objects. basically the view and the trigger work as a router/dispatcher for the data.
*edit*
I should also add that you can write a pl/sql package which does the fetch and the dml operations with the form items as input. This is the solution I would typically use for any form that was not a simple CRUD form for a table. One thing to note is for the fetch I prefer to use out parameters for the form items so it requires the developer to map the item to the param in the app so it will show up when you are searching through the app. I highly discourage hiding item references inside of packaged code.
Good Luck!
Tyson
Message was edited by: TysonJouglet

SQLEXEC not able to filter extract on sql statement or function call.

hi all,
i'm trying to do some basic extract filtering using a stored function and am not having much success.
i started off using a procedure call but have been unsuccessful getting that working, i've simplified
it to use a sql statement calling a function for a value to filter on, but cannot even get that to work.
i've read through the documentation and i cannot figure out what is going wrong.
any help would be much appreciated.
thx,
daniel
function code is very simple, just trying to get something working.
FUNCTION f_lookup_offer_id(v_offer_id IN offer.offer_id%TYPE)
RETURN company.name%TYPE IS
lv_company_name company.name%TYPE;
BEGIN
SELECT c.name
INTO lv_company_name
FROM orders a, offer b, company c
WHERE a.offer_id = b.offer_id
AND b.company_id = c.company_id
AND a.order_id = v_order_id;
RETURN lv_company_name;
END f_lookup_offer_id ;
Oracle GoldenGate Command Interpreter for Oracle
Version 11.1.1.0.0 Build 078
Solaris, sparc, 64bit (optimized), Oracle 10 on Jul 28 2010 13:26:39
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
EXTRACT EATUOP1
INCLUDE ./dirprm/GGS_LOGIN.inc
EXTTRAIL ./dirdat/up
DISCARDFILE ./dirout/eatuop1.dsc, append , MEGABYTES 50
DISCARDROLLOVER ON SUNDAY AT 06:00
-- Database and DDL Options
-- Added to avoid errors when setting unused columns
DBOPTIONS ALLOWUNUSEDCOLUMN
-- Get full row for deletes
NOCOMPRESSDELETES
-- Get updates before
GETUPDATEBEFORES
-- If commit SCN that is not greater than the highest SCN already processed error
THREADOPTIONS MAXCOMMITPROPAGATIONDELAY 15000 IOLATENCY 6000
-- Retains original timestamp. Currently using GMT
NOTCPSOURCETIMER
--TABLE DEFS
TABLE master.OFFER,
SQLEXEC ( ID ck_offer,
QUERY " select master.f_lookup_offer_id(:off_id) is_company from dual ",
PARAMS (off_id = offer_id),
BEFOREFILTER),
FILTER (@GETVAL (ck_offer.is_company = "Google, Inc."));
does not give any errors, but also does not capture any data, it's filtering everything out and trail files are empty, minus a header.
thoughts or help?
2012-04-04 22:17:36 INFO OGG-00993 Oracle GoldenGate Capture for Oracle, eatuop1.prm: EXTRACT EATUOP1 started.
2012-04-04 22:17:36 INFO OGG-01055 Oracle GoldenGate Capture for Oracle, eatuop1.prm: Recovery initialization completed for target file ./dirdat/up000022, at RBA 978.
2012-04-04 22:17:36 INFO OGG-01478 Oracle GoldenGate Capture for Oracle, eatuop1.prm: Output file ./dirdat/up is using format RELEASE 10.4/11.1.
2012-04-04 22:17:36 INFO OGG-01026 Oracle GoldenGate Capture for Oracle, eatuop1.prm: Rolling over remote file ./dirdat/up000022.
2012-04-04 22:17:36 INFO OGG-01053 Oracle GoldenGate Capture for Oracle, eatuop1.prm: Recovery completed for target file ./dirdat/up000023, at RBA 978.
2012-04-04 22:17:36 INFO OGG-01057 Oracle GoldenGate Capture for Oracle, eatuop1.prm: Recovery completed for all targets.
2012-04-04 22:17:36 INFO OGG-01517 Oracle GoldenGate Capture for Oracle, eatuop1.prm: Position of first record processed Sequence 13469, RBA 21894160, SCN 1789.722275534, Apr 4, 2012 10:12:40 PM.
-rw-rw-rw- 1 svc_ggs 502 978 Apr 4 22:17 up000023

got it working, this seems to be about as simple as i could formulate it. thanks for pointing me in the right direction.
TABLE GGS_TEST_EXT, &
SQLEXEC ( ID co_count, &
QUERY " select f_lookup_company_name(:P1) x from dual ", &
PARAMS ( P1 = company_id), BEFOREFILTER), &
FILTER ( @GETVAL (co_count.x = 0) );
then i have a function that returns 1 or 0, depending on the company id passed in.
thx,
daniel

Sql statement in a table not accepting variable

I have the following problem on 10.1.0.3.0 with varialbe in an execute immediate statement
here is the code that I am using
declare
remote_data_link varchar2(25) := 'UDE_DATATRANSFER_LINK';
FROM_SCHEMA VARCHAR2(40) := 'UDE_OLTP';
l_last_process_date date := to_date(to_char(sysdate,'mm-dd-yyyy hh:mi:ss'),'mm-dd-yyyy hh:mi:ss') - 1;
stmt varchar2(4000) := 'MERGE into applicant_adverseaction_info theTarget USING (select * from '||FROM_SCHEMA||'.applicant_adverseaction_info@'||remote_data_link||' where last_activity > :l_last_process_date ) theSource ON(theTarget.applicant_id = theSource.applicant_id) WHEN MATCHED THEN UPDATE SET theTarget.cb_used = theSource.cb_used, theTarget.cb_address = theSource.cb_address, theTarget.scoredmodel_id = theSource.scoredmodel_id, theTarget.last_activity = theSource.last_activity WHEN NOT MATCHED THEN INSERT(CB_USED, CB_ADDRESS, SCOREDMODEL_ID, APPLICANT_ID, LAST_ACTIVITY) values(theSource.cb_used, theSource.cb_address, theSource.scoredmodel_id, theSource.applicant_id, theSource.last_activity)';
stmt2 varchar2(4000) := 'MERGE into edm_application theTarget USING (select * from '||from_schema||'.edm_application@'||remote_data_link||' where last_activity > :l_last_process_date) theSource ON (theTarget.edm_appl_id = theSource.edm_appl_id) WHEN MATCHED THEN UPDATE SET theTarget.APP_REF_KEY = theSource.APP_REF_KEY, theTarget.IMPORT_REF_KEY = theSource.IMPORT_REF_KEY, theTarget.LAST_ACTIVITY = theSource.LAST_ACTIVITY WHEN NOT MATCHED THEN INSERT (EDM_APPL_ID, APP_REF_KEY, IMPORT_REF_KEY, LAST_ACTIVITY) values(theSource.EDM_APPL_ID, theSource.APP_REF_KEY, theSource.IMPORT_REF_KEY, theSource.LAST_ACTIVITY)';
v_error varchar2(4000);
T_MERGE VARCHAR2(4000);
stmt3 varchar2(4000);
BEGIN
select merge_sql
INTO T_MERGE
from transfertables
where table_name= 'edm_application';
remote_data_link:= 'UDE_DATATRANSFER_LINK';
FROM_SCHEMA := 'UDE_OLTP';
--DBMS_OUTPUT.PUT_LINE(SUBSTR(stmt2,1,200));
--STMT2 := T_MERGE;
dbms_output.put_line(from_schema||' '||remote_data_link||' '||l_last_process_date);
EXECUTE IMMEDIATE stmt2 using l_last_process_date;
--execute immediate stmt3 ;
dbms_output.put_line(from_schema||' '||remote_data_link||' '||l_last_process_date);
dbms_output.put_line(substr(stmt2,1,200));
commit;
EXCEPTION
WHEN OTHERS THEN
V_ERROR := SQLCODE||' '||SQLERRM;
v_ERROR := V_ERROR ||' '||SUBSTR(stmt2,1,200);
DBMS_OUTPUT.PUT_LINE(V_ERROR);
--dbms_output.put_line(substr(stmt2,1,200));
END;
This works perfectly
but if I change it to get the same statement in a db table
declare
remote_data_link varchar2(25) := 'UDE_DATATRANSFER_LINK';
FROM_SCHEMA VARCHAR2(40) := 'UDE_OLTP';
l_last_process_date date := to_date(to_char(sysdate,'mm-dd-yyyy hh:mi:ss'),'mm-dd-yyyy hh:mi:ss') - 1;
stmt varchar2(4000) := 'MERGE into applicant_adverseaction_info theTarget USING (select * from '||FROM_SCHEMA||'.applicant_adverseaction_info@'||remote_data_link||' where last_activity > :l_last_process_date ) theSource ON(theTarget.applicant_id = theSource.applicant_id) WHEN MATCHED THEN UPDATE SET theTarget.cb_used = theSource.cb_used, theTarget.cb_address = theSource.cb_address, theTarget.scoredmodel_id = theSource.scoredmodel_id, theTarget.last_activity = theSource.last_activity WHEN NOT MATCHED THEN INSERT(CB_USED, CB_ADDRESS, SCOREDMODEL_ID, APPLICANT_ID, LAST_ACTIVITY) values(theSource.cb_used, theSource.cb_address, theSource.scoredmodel_id, theSource.applicant_id, theSource.last_activity)';
stmt2 varchar2(4000) := 'MERGE into edm_application theTarget USING (select * from '||from_schema||'.edm_application@'||remote_data_link||' where last_activity > :l_last_process_date) theSource ON (theTarget.edm_appl_id = theSource.edm_appl_id) WHEN MATCHED THEN UPDATE SET theTarget.APP_REF_KEY = theSource.APP_REF_KEY, theTarget.IMPORT_REF_KEY = theSource.IMPORT_REF_KEY, theTarget.LAST_ACTIVITY = theSource.LAST_ACTIVITY WHEN NOT MATCHED THEN INSERT (EDM_APPL_ID, APP_REF_KEY, IMPORT_REF_KEY, LAST_ACTIVITY) values(theSource.EDM_APPL_ID, theSource.APP_REF_KEY, theSource.IMPORT_REF_KEY, theSource.LAST_ACTIVITY)';
v_error varchar2(4000);
T_MERGE VARCHAR2(4000);
stmt3 varchar2(4000);
BEGIN
select merge_sql
INTO T_MERGE
from transfertables
where table_name= 'edm_application';
remote_data_link:= 'UDE_DATATRANSFER_LINK';
FROM_SCHEMA := 'UDE_OLTP';
--DBMS_OUTPUT.PUT_LINE(SUBSTR(stmt2,1,200));
STMT2 := T_MERGE;
dbms_output.put_line(from_schema||' '||remote_data_link||' '||l_last_process_date);
EXECUTE IMMEDIATE stmt2 using l_last_process_date;
--execute immediate stmt3 ;
dbms_output.put_line(from_schema||' '||remote_data_link||' '||l_last_process_date);
dbms_output.put_line(substr(stmt2,1,200));
commit;
EXCEPTION
WHEN OTHERS THEN
V_ERROR := SQLCODE||' '||SQLERRM;
v_ERROR := V_ERROR ||' '||SUBSTR(stmt2,1,200);
DBMS_OUTPUT.PUT_LINE(V_ERROR);
--dbms_output.put_line(substr(stmt2,1,200));
END;
I get ora-00900 invalid sql statement
can somebody explain why this happens
Thanks

I agree with jan and anthony. Your post is too long and ill-formatted. However here's my understanding of your problem (with examples though slightly different ones).
1- I have a function that returns number of records in a any given table.
1 CREATE OR REPLACE FUNCTION get_count(p_table varchar2)
2     RETURN NUMBER IS
3     v_cnt number;
4 BEGIN
5    EXECUTE IMMEDIATE('SELECT count(*) FROM '||p_table) INTO v_cnt;
6    RETURN v_cnt;
7* END;
SQL> /
Function created.
SQL> SELECT get_count('emp')
2 FROM dual
3 /
GET_COUNT('EMP')
              14
2- I decide to move the statement to a database table and recreate my function.
SQL> CREATE TABLE test
2 (stmt varchar2(2000))
3 /
Table created.
SQL> INSERT INTO test
2 VALUES('SELECT count(*) FROM p_table');
1 row created.
SQL> CREATE OR REPLACE FUNCTION get_count(p_table varchar2)
2     RETURN NUMBER IS
3     v_cnt number;
4     v_stmt varchar2(4000);
5 BEGIN
6     SELECT stmt INTO v_stmt
7     FROM test;
8     EXECUTE IMMEDIATE(v_stmt) INTO v_cnt;
9     RETURN v_cnt;
10 END;
11 /
Function created.
SQL> SELECT get_count('emp')
2 FROM dual
3 /
SELECT get_count('emp')
ERROR at line 1:
ORA-00942: table or view does not exist
ORA-06512: at "SCOTT.GET_COUNT", line 8
ORA-06512: at line 1
--p_table in the column is a string and has nothing to do with p_table parameter in the function. And since there's no p_table table in my schema function returns error on execution. I suppose this is what you mean by "sql statement in a table not accepting variable"
3- I rectify the problem by recreating the function.
1 CREATE OR REPLACE FUNCTION get_count(p_table varchar2)
2     RETURN NUMBER IS
3     v_cnt number;
4     v_stmt varchar2(4000);
5 BEGIN
6     SELECT replace(stmt,'p_table',p_table) INTO v_stmt
7     FROM test;
8     EXECUTE IMMEDIATE(v_stmt) INTO v_cnt;
9     RETURN v_cnt;
10* END;
SQL> /
Function created.
SQL> SELECT get_count('emp')
2 FROM dual
3 /
GET_COUNT('EMP')
              14
Hope this gives you some idea.-----------------------
Anwar

The transaction associated with the current connection has completed but has not been disposed. The transaction must be disposed before the connection can be used to execute SQL statements.

Hello All,
I am getting below error can you please help me
Error:-
The transaction associated with the current connection has completed but has not been disposed. The transaction must be disposed before the connection can be used to execute SQL statements.

Perhaps this thread will help you out
http://stackoverflow.com/questions/11453066/error-the-transaction-associated-with-the-current-connection-has-completed-but
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

SQL statement NOT IN

Similar Messages

Maybe you are looking for