SSAS 2012 Tabular. Analysis Services Query Log not working

Hello.
It is possible to configure Analysis Services Query Log on SSAS 2012 Tabular (11.0.3321) server? Or this feature works only with Multidimensional server mode?
It is not a problem for me to configure Query Log on Multidimensional server. But when I'm trying to do this in Tabular server result is always the same: table S_OlapQueryLog created but no data there.
This problem exist in our production server. And is fully reproduced in test environment. This problem was reproduced with SQL 2012 RTM, CU4, SP1 and SP1 CU1.
I tryed to configure Analysis Services Query Log by using SQL account. Later by using windows authentification. Accounts was db owners. Later I have used accounts with sysadmin rights. Results was the same.
In msmdsrv.log i can find only related events like this:
(12/7/2012 9:22:59 PM) Message: The query log was started. (Source:
\\?\P:\Olap\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x41210003)
(12/7/2012 9:25:03 PM) Message: The query log was stopped. (Source:
\\?\P:\Olap\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x41210004)
I'm stuck completely with this functionality. So if someone was much luckier than I please write to me.
Regards
Audrius

I agree with Gerhard's comments, but there are a couple of additional points
- I am not 100 percent sure if queries that are answered by the SE cache are recorded in the query log
Queries answered by the SE cache are not definitely not recorded in the QueryLog. So depending on the types of queries and the design of your cube you could possible miss a large proportion of the actual end user queries.
The QueryLog records the QuerySubcube events and there are zero to many of these generated for a given end user query (zero if the query can be answered from cache). The optimizer may also choose to pre-fetch a wider range of data or to break a single range
into a few smaller requests so it is not a true indication of the actual query that the end user generated.
Doing a trace is the only way to catch the actual queries submitted by end users.
http://darren.gosbell.com - please mark correct answers

Similar Messages

OBIEE 11g : query log not found

Hi,
I am not able to see the query log in 11g answers manage session throwing error query log not found.
I am using obiee 11g. 11g admin client is installed in local machine and I upload the rpd through enterprise manager. But I can not able to open the rpd in online mode that's why cannot change the query log level=2 (as in obiee 10g) for seeing the query log in Answers. Usually after making changes in 11g rpd, I upload that in server via enterprise manager console.
Can anyone please tell me what should be correct option to see the query log and how I can open the rpd in online mode and how I can set the query log level in obiee 11g????
Please help.
Thanks
Titas

Hi,
Its known bug and it can be done by below methods,
Method1:
If you enabled loglevel for each users wise it may be override with below place also can you confirm both places.
enabled Tools-->Options-->Repository-->
System log level by default will be 0 just try to increase to 2 or 3 and save it.
Method1:
by each report wise enabling loglevel
try putting the below syntax in prefix section of advanced tab.
SET VARIABLE LOGLEVEL=2,DISABLE_CACHE_HIT=1;
It should generate the log with database sql as well.
Method 3:
Create Session variable(LOGLEVEL) with initblock
in your init block --> datasource place put it like below query
select 3 from IW_POSITION
Note:just point any existing physical table from u r RPD.
Then try to save it and test it.
Refer screen
http://bidevata.wordpress.com/2012/03/03/no-log-found-error-in-obiee-11g/
Thanks
Deva
Edited by: Devarasu on Oct 11, 2012 11:44 PM

Converting a SSAS 2008 R2 database into a SSAS 2012 Tabular database

Hi,
I'd like to know if it is possible to convert or migrate in whatever manner a SSAS 2008 R2 database (multidimensional) into a SSAS 2012 Tabular database.
Many thanks

Unfortunately there is no way to convert or migrate a multidimensional cube to a tabular model.
This MSDN article says ...
Because tabular is the newer solution, you might think that migrating an existing multidimensional solution to a tabular format is
the correct course of action, but this is usually not the case. Tabular does not supersede multidimensional, and the two formats are not interchangeable.
If you need to migrate a cube to tabular (maybe for performance reasons), unfortunately you need to build it from scratch. I believe the reason for this is that there are concepts that do not translate across the technologies. There are no good
3rd party tools that I'm aware of that even attempt to do this.
Christian Wade
http://christianwade.wordpress.com/
Please mark correct responses as answers!

Generic service 'Analysis Services (TEST1)' could not be brought online (with error '1060') during an attempt to open the service. Possible causes include: the service is either not installed or the specified service name is invalid.

Hi,
We have a cluster with 2 nodes. Everything works fine in Node1. When I try to failover TEST1 database to Node-2 it fails with this message.
Generic service 'Analysis Services (TEST1)' could not be brought online (with error '1060') during an attempt to open the service. Possible causes include: the service is either not installed or the specified service name is invalid.
Any help is much appreciated.
Thanks

Hello,
The error message is pretty straight forward, it's saying either the service isn't installed or it's not installed as the same service on that node. Did you install analysis services on the second node (from the error it seems like it isn't)?
Sean Gallardy | Blog |
Twitter

Bex Query is not working in portal

Dear Experts,
i have uploaded BI master role into portal, By default Bex Queries are assgined to Master Role. when I clcik on preview for particular Bex Query, it's working fine. but after assigning the master role to end user, that same Bex Query is not working. it's showing Below error..
Portal runtime error.
An exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 05:22_18/08/10_0002_7116150
Refer to the log file for details about this exception.
please give me suggetions...
Regards,
VENU

Hi Venu ,
Can you please check the logs for details - http(s):<host>:<port>/nwa . This may be a permissions issue . Check if the iview has read permission for everyone group and then test . Also post the error details here .
Regards
Mayank

Temporary Table In SAP Query - Does not Work?

DECLARE @date DATE
DECLARE @delrows INT
DECLARE @delquan INT
DECLARE @a INT
DECLARE @recrows INT
DECLARE @recquan INT
SET @a=0
IF OBJECT_ID('tempdb..##tab) IS NOT NULL DROP TABLE ##tab
CREATE TABLE ##tab
[Date] date,
[Delivery Rows] varchar(40),
[Delivery Total Units] varchar(40),
[Receipts Rows] varchar(40),
[Receipts Total Units] varchar(40),
WHILE @a!=7
     BEGIN
     SET @date=DATEADD(day,-@a, getdate())
     SELECT @delrows=ISNULL(COUNT(DLN1.[LineNum]),0), @delquan=ISNULL(SUM(DLN1.[Quantity]),0)
     FROM ODLN
     INNER JOIN DLN1 ON ODLN.[DocEntry]=DLN1.[DocEntry]
     WHERE ODLN.[CreateDate] = @date
     SELECT @recrows=ISNULL(COUNT(PCH1.[LineNum]),0) , @recquan=ISNULL(SUM(PCH1.[Quantity]),0)
     FROM OPCH
     INNER JOIN PCH1 ON OPCH.[DocEntry]=PCH1.[DocEntry]
     WHERE OPCH.[DocDate]=@date
     SET @a=@a+1
          INSERT INTO ##tab VALUES(@date,@delrows,@delquan,@recrows,@recquan)
END
SELECT * FROM ##tab
{/code}
Can anyone explain why this query does not work in SAP? It works fine on SQL but gives me this message in SAP:
1). [Microsoft][SQL Server Native Client 10.0][SQL Server]Incorrect syntax near ')'.
2). [Microsoft][SQL Server Native Client 10.0][SQL Server]Statement 'Service Contracts' (OCTR) (s) could not be prepared.
Edited by: Chris Candido on Feb 2, 2011 8:38 PM

Chris,
There are several areas in your code which needed changes.
1. On the field name for your temp table you had spaces.
2. The SAP table name ODLN, OPCH, PCH1 had to be fully referenced like
[dbo].[ODLN]
3. You really need not have ## in front of your temp table, it could just be #
The select at the end is actually what causes the most problem as for some reason from within SAP it does not produce the result. I would suggest you put the whole code into a Stored Procedure and call the SP from SAP. Corrected SQL below. If you remove the Select line at the end the query would work with in SAP, but keep it give give you an error. SP is the best option for this.
DECLARE @date DATE
DECLARE @delrows INT
DECLARE @delquan INT
DECLARE @a INT
DECLARE @recrows INT
DECLARE @recquan INT
SET @a=0
IF object_id('tempdb..#tab') IS NOT NULL
BEGIN
   DROP TABLE #tab
END
CREATE TABLE #tab
[Date] date,
DeliveryRows varchar(40),
DeliveryTotalUnits varchar(40),
ReceiptsRows varchar(40),
ReceiptsTotalUnits varchar(40),
WHILE @a!=7
BEGIN
SET @date=DATEADD(day,-@a, getdate())
SELECT @delrows=ISNULL(COUNT(DLN1.LineNum),0), @delquan=ISNULL(SUM(DLN1.Quantity),0)
FROM [dbo].[ODLN]
INNER JOIN DLN1 ON [dbo].[ODLN].DocEntry=DLN1.DocEntry
WHERE [dbo].[ODLN].CreateDate = @date
SELECT @recrows=ISNULL(COUNT([dbo].[PCH1].LineNum),0) , @recquan=ISNULL(SUM([dbo].[PCH1].Quantity),0)
FROM [dbo].[OPCH]
INNER JOIN [dbo].[PCH1] ON [dbo].[OPCH].DocEntry=[dbo].[PCH1].DocEntry
WHERE [dbo].[OPCH].DocDate=@date
SET @a=@a+1
INSERT INTO #tab VALUES(@date,@delrows,@delquan,@recrows,@recquan)
END
SELECT * FROM #tab
Suda Sampath

Excel 2010 MS Query is not working

Hi, I am in the process of upgrading all my Excel 2003 spreadsheets to Excel 2010. I am running into problem with the MS Query. Spreadsheets have MS Query linking to MS database. However, when I open some of the spreadsheets, the MS Query
is not working ie. the blue circle keeps turning and then not responding. It is very weird that this MS Query is working fine with some spreadsheets but not couple and they are all linking to the same database except a small different in criteria. I
tried to re-create the Query in the spreadsheet in Excel 2010 by going to Data>From Other Sources>From Microsoft Query and select the database. Once I set up the criteria and click Return data, the Query gets stuck.
Please help! Any comments/suggestions will be appreciated.
Thanks

Hi,
There are many possible causes that can crash MSQuery in Excel 2010.
First, please make sure we have installed the latest Office 2010 and Windows patches.
Second, Please read the Blog, it explains one typical crash scenario.
=====
AppName: msqry32.exe AppVer: 14.0.4750.1000 ModName: msvcr90.dll
There are several possible resolution you can try to resolve the above crash:
1. When you launch MS Query, just disable the option "Validate queries before saving or returning data", this is the fifth box in the options menu.
The only problem is that if you have made any mistake in your query, you'll only be noticed when receiving the data in excel.
2. Repair all the keys into registry at the following place:
[HKEY_CURRENT_USER\Software\ODBC\ODBC.INI\ODBC]
For example:
Windows Registry Editor Version 5.00
[HKEY_CURRENT_USER\Software\ODBC\ODBC.INI\ODBC]
"TraceFile"="C:\\DOCUME~1\\...USERNAME...\\IMPOST~1\\Temp\\SQL.LOG"
"TraceDll"="C:\\WINDOWS\\system32\\odbctrac.dll"
http://blogs.technet.com/b/asiasupp/archive/2011/11/07/msquery-randomly-crashed.aspx
=====
Third, start the Excel 2010 with
safe mode, it helps us confirm if some add-ins cause this issue.
Hope it's helpful.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in
Office programs.

I've become increasingly frustrated with the ipad adobe app. I've subscribed to be able to convert my pdf files into word documents and it has yet to work I've paid for a service that does not work which in turn makes me a disgruntled customer to say the

I've become increasingly frustrated with the ipad adobe app. I've subscribed to be able to convert my pdf files into word documents and it has yet to work I've paid for a service that does not work which in turn makes me a disgruntled customer to say the least very disappointed with such horrible service

Which service did you subscribe to? Adobe PDF Pack?
Once I know the service that you subscribed to, I can move this post to the right forum so that you can get in touch with the folks who can assist you.

Query is not working correctly

Hi all,
Below query is not working correctly. Please let me know, if you find the mistake
select
a.name,
b.VOD_NAME,
count(xm.ATTRIB_03)
from
siebel.s_vod b
left outer join ISS_OBJ_DEF c on b.OBJECT_NUM=c.PAR_VOD_ID
left outer join vod d on c.VOD_ID=d.row_id
left outer join PROD_INT a on d.OBJECT_NUM=a.CFG_MODEL_ID
left outer join PROD_INT_XM xm on a.row_id=xm.PAR_ROW_ID
where
b.VOD_TYPE_CD='CLASS_DEF'
and
c.LAST_VERS = 0
and
b.vod_name='Componentes'
group by a.name,b.vod_name having count(xm.ATTRIB_03) >=5

user9522927 wrote:
Hi all,
Below query is not working correctly. Please let me know, if you find the mistake
select
a.name,
b.VOD_NAME,
count(xm.ATTRIB_03)
from
siebel.s_vod b
left outer join ISS_OBJ_DEF c on b.OBJECT_NUM=c.PAR_VOD_ID
left outer join vod d on c.VOD_ID=d.row_id
left outer join PROD_INT a on d.OBJECT_NUM=a.CFG_MODEL_ID
left outer join PROD_INT_XM xm on a.row_id=xm.PAR_ROW_ID
where
b.VOD_TYPE_CD='CLASS_DEF'
and
c.LAST_VERS = 0
and
b.vod_name='Componentes'
group by a.name,b.vod_name having count(xm.ATTRIB_03) >=5I couldn't see through the internet what happend when you ran said query. How about helping us out by showing us the evidence that it "is not working correctly".
"Here's a picture of my car sitting in the driveway. Why won't it start?"

Select query is not working in BDC Program

Hi,
I am working in BDC for update valuation class for T-code mm01.Actually In this BDC i am using two recoding based on material type.
i am using two internal table : I_DATA and ITAB
Use I_DATA to hold excle data in which material No, plant , valuation type , valuation No. and ITAB for material No, material type Only.
So, i am fetching material Type ( MARA-MTART ) through select query. But Select query is not working. and also i did check MARA table according that Material Number then material no. exit in Mara Table.
Note : at run time I_DATA have 1 row but ITAB have 0 row ....
DATA: BEGIN OF I_DATA OCCURS 0,
MATNR TYPE MARA-MATNR,
WERKS TYPE MARC-WERKS,
BWTAR TYPE RMMG1-BWTAR,
VERPR TYPE BMMH1-VERPR,
BKLAS TYPE MBEW-BKLAS,
STATUS TYPE C,
END OF I_DATA.
DATA : BEGIN OF ITAB OCCURS 0,
MATNR LIKE MARA-MATNR,
MTART LIKE MARA-MTART,
END OF ITAB.
Loop at I_DATA.
select matnr mtart from mara into table itab where matnr = I_DATA-matnr.
endloop.
Guide me..........

If you use your
Loop at I_DATA.
select matnr mtart from mara into table itab
    where matnr = I_DATA-matnr.
endloop.
At end of loop, itab will only contain the result of the last select, so use a
Loop at I_DATA.
select matnr mtart from mara APPENDING table itab
    where matnr = I_DATA-matnr.
endloop.
better
if I_DATA[] is not initial.
select matnr mtart from mara into table itab
    FOR ALL ENTRIES IN i_data where matnr = i_data-matnr.
endif.
Some Remarks
- If actually required (where does I_DATA come from, is it an external format, you need the internal value to use in SELECT statement), check via SE11 the correct [conversion exit|http://help.sap.com/saphelp_nw04/helpdata/en/35/26b217afab52b9e10000009b38f974/content.htm] associated with domain MATNR (Is it truly ALPHA, and not something like MATN1, so [CONVERSION_EXIT_MATN1_INPUT|http://www.sdn.sap.com/irj/scn/advancedsearch?query=conversion_exit_matn1_input])
- You could try to use BAPI like [BAPI_MATERIAL_SAVEDATA|http://www.sdn.sap.com/irj/scn/advancedsearch?query=bapi_material_savedata] and not BDC
Regards,
Raymond

Why select query is not working?

CREATE OR REPLACE TYPE prod_type AS OBJECT (
pid INT,
pprice NUMBER,
MEMBER PROCEDURE display(pid IN NUMBER));
create table prod of prod_type (pid primary key);
CREATE OR REPLACE TYPE deal_type UNDER prod_type (
ctr NUMBER,
OVERRIDING MEMBER PROCEDURE display (pid IN NUMBER),
insert into prod values(deal_type(101, 4, 1));
insert into prod values(deal_type(102, 5, 0));
------below given select query is NOT WORKING ---------
select ctr from prod p where p.pid=101;
Thanks,
-Nid

------below given select query is NOT WORKINGWondering how you inserted data ...
SQL> CREATE OR REPLACE TYPE prod_type AS OBJECT (
2 pid INT,
3 pprice NUMBER,
4 MEMBER PROCEDURE display(pid IN NUMBER));
5 /
Type created.
SQL>
SQL> create table prod of prod_type (pid primary key);
Table created.
SQL>
SQL> CREATE OR REPLACE TYPE deal_type UNDER prod_type (
2 ctr NUMBER,
3 OVERRIDING MEMBER PROCEDURE display (pid IN NUMBER),
4 );
5 /
Warning: Type created with compilation errors.
SQL> sho err
Errors for TYPE DEAL_TYPE:
LINE/COL ERROR
4/1      PLS-00103: Encountered the symbol ")" when expecting one of the
         following:
         , not pragma <an identifier>
         <a double-quoted delimited-identifier> final instantiable
         current order overriding static member constructor map
SQL> CREATE OR REPLACE TYPE deal_type UNDER prod_type (
2 ctr NUMBER,
3 OVERRIDING MEMBER PROCEDURE display (pid IN NUMBER));
4 /
Warning: Type created with compilation errors.
SQL> sho err
Errors for TYPE DEAL_TYPE:
LINE/COL ERROR
1/1      PLS-00590: attempting to create a subtype UNDER a FINAL type
SQL>You made an attempt to create a subtype UNDER a FINAL type - that the reason why can not work ...
Avoid deriving a subtype from this FINAL type.
HTH

HT5594 I upgraded to iOS 7 and my location service button does not work. How can I turn it back on?

I upgraded to iOS 7 and my location service button does not work. How can I turn it back on?

Settings>General>Restrictions>Privacy>Location Services. Have you restricted it?

SSAS 2012 Tabular Model Restarting

Hello,
We are having tabular model cube which is of 40GB. Every day we are processing this cube via SSIS, before processing it we are restarting the SSAS service(from scripttask) so that it will clear memory and cache.
But most of the time service restating is not happening properly and package is getting failed. Thereafter we need to start service manually and then again we need to run the package.
My question :
• Restarting SSAS service every day is really good practice ?
• Apart from restarting service what other approach is there?
Awaiting for your reply!
Thanks and Regards,
Santhosh Shasthri M R

Hi Santhosh,
You can troubleshoot why service restating is not happening properly by using the msmdsrv.log. Are there any error message on the log? Under C:\Program Files\Microsoft SQL Server\MSAS11.\OLAP\Log (this could be different for your server), there are 3 log
files that are generated:
msmdrrv.log
FlightRecorderCurrent.trc
FightRecorderBack.trc
The msmdrrv.log simply points to the other two logs. There might be some detail information for this error.
Besides, I don't think you need to resrart the server to clear memory and cache. You can clear Analysis Services caches with SSIS task by using XMLA command, and run this package before run package to process cube.
http://consultingblogs.emc.com/jamiethomson/archive/2006/07/07/SSAS_3A00_-Clearing-the-Analysis-Services-cache.aspx
http://technet.microsoft.com/en-us/library/hh230974.aspx
Regards,
Charlie Liao
TechNet Community Support

SSAS(SQl Server Analysis Services).

Hello Sir,
We have created an OLAP cube using Business Intelligence Development Studio(BIDS) with
SQL Server Analysis Services(SSAS) using our data Source which is working fine & for reporting we are connecting the cube with
MS-Excel through data Connections & we are able to generate the reports with the cube data by filtering & Customizing according to the requirement of reports within the same server instance. But when we want to deploy the cube onto
the different server (basically on users server) to generate the respective reports we are facing problem. As the end user is not going to have access to the SQL Server Business Intelligence Development Studio how can we deploy the cube. As, we are using ODBC
connections.
As this is our first project through SSAS, we kindly need some support to proceed forward.
So, Please find the Queries related to the enclosed description as above.
Queries related to SSAS Cube:
What are the steps involved to deploy a OLAP cube created in one server to another server?
Is there any third party tool required for it?
Thanks in advance.
Regards,
Praveen.

Hi Praveen,
The following link tells you what you need to know; -
http://technet.microsoft.com/en-us/library/ms166576(v=sql.105).aspx
I confirm you do not need a third party tool to deploy a cube and empower your users to access this cube.
So in summary; -
Within your Analysis Services solution within BIDs; -
1) Right click your mouse over the Analysis Services database icon, which is immediately below the solution icon.
2) Select the sub tab "Deployment".
3) Enter the name of the server you need to deploy to.
4) Click "OK".
5) Right click your mouse (again) over the Analysis Services database icon, which is immediately below the solution icon.
6) Select "Deploy"
Kieran Patrick Wood http://www.innovativebusinessintelligence.com http://uk.linkedin.com/in/kieranpatrickwood http://kieranwood.wordpress.com/

SSAS 2012 Tabular Error: The operation was cancelled because of locking conflicts

I have a 800 mb SSAS database that I refresh(Process current day partition) every 30 minutes. As soon as the processing starts all my users get error The operation was cancelled because of locking conflicts. I ran the deadlocks trace as described in http://blogs.msdn.com/b/sql_pfe_blog/archive/2009/08/27/deadlock-troubleshooting-in-sql-server-analysis-services-ssas.aspx
but all I see is the processing start and all the users getting the error ("The operation was cancelled because of locking conflicts") 22 mil sec after the processing starts.
I also ran "select * from $system.discover_locks" but I only see lock types 2,4 and 8. None of which seem to be exclusive
This is SSAS 2012 with sp 1
Database Architect

Hi Derek,
According to your description, you get the dead lock error when processing partition. Right?
In Analysis Services, this error occurs when lock manager detects a dead lock. Lock type 2,4 and 8 can also have two transactions waiting each other and cause deadlock. In this scenario, please check the Dead Lock Graph in SQL Profiler
and find the related processes. Check what the processes work for to see if you need to do parallel processing or process other objects before partition processing.
Best Regards,
Simon Hou
TechNet Community Support

SSAS 2012 Tabular. Analysis Services Query Log not working

Similar Messages

Maybe you are looking for