Ssfcomposer 181
hi gurus,
In sales order , i am having the following fields (in item level table) : item ,material description ,order qty,price,amount.
here i am adding extra 2 fields like batch no. and free qty. for this i am not getting output and i am getting error as ssfcomposer - 181 " no other column available ".
please tell me how to solve this.
Hi,
For displaying additional data for two fields, first you need to add two columns in the table layout within smartforms.
also for fetching data you need to add logic in program lines to display those two fields.
Hope this works for you.
Thanks.......
Similar Messages
-
Dump : No other column available
Hi,
I have done some changes in smartform. I cut down columns of table from 9 to 7. When i am executing following dump is coming
No other column available (see long text!).
Message no. SSFCOMPOSER 181
Diagnosis
You tried to switch to the next table column, but no other column exists. The current column is 7. The line type %LTYPE1 contains only 7 columns.
System Response
The system issues an error message.
Procedure
Check whether the current line type is the desired line type and whether you defined a switch to a new table line.
Can you please tell me what i need to do to resolve this?
Thank you.Hello,
The no: of rows/Text elements must be greater than the no: of Columns, in the table.
Check all text elements output option tab against the table.
Create another row using the defined line type, used for the text element.
for eg: your table linetype has 10 columns and you are trying to print a text element in the 11th column.
Put a break point on where the message is thrown.
Check for the variables syst-msgv1, syst-msgv2, syst-msgv3 & syst-msgv4. One among the variables will show the text element that is causing the issue.
Hope this helps.
Cheers,
Remi -
I am trying to use Adobe Flash player at home to simply surf the web. For a long time I've been getting prompts to update Flash Player and however much I updated it the prompts kept on poping up. This got so frustrating I decided i'd try to fix the problem once and for all. So I checked the system requirements Adobe recommend for the update I had been downloading and found one of the minimum requirements to be an intel pentium 4 2.33ghz processor. I checked my system and I have only an intel CPU [email protected] processor. My question is, does this explain why I am having so many problems? I've tried to download an earlier version of Flash Player but I always get redirected to the 10.3.181.14 version. How it has come to this I am not quite sure but I must admit I have removed the Flash Player from my computer at the moment and I'm worried that it was a mistake because will I ever get a working version again? I am running Windows Vista 32bit and Internet Explorer 8 32bit. I am out of my depth so please be gentle!
You might have better luck if you post your question in the Flash Player forum...
http://forums.adobe.com/community/webplayers/flash_player -
SSFCOMPOSER - 154 - No output request open. End not possible.
Hi Experts,
I'm trying to print multiple smartforms using FMs SSF_OPEN and SSF_CLOSE. Inside the main program RBDAPP01 (Inbound processing for IDOCS) there is a loop at the IDOCS to be processed. Deep within the processing, we have a custom FM being called which prints smartforms. Since there is a loop at the calling main program, I have organized the code in the custom FM such that the first IDOC calls SSF_OPEN and the last IDOC calls SSF_CLOSE, so that all IDOCS in between will be able to print their smartforms. Here is the call stack:
8
SAPLZCUSTOM
ZCUSTOMPROGRAM
113
FUNCTION
ZCUSTOMPROGRAM
7
SAPLPPC1
ZCUSTOMPROGRAM
136
FUNCTION
KK2A_GET_DATA_FROM_IDOC
7
SAPLPPC1
LPPC1U01
1
FUNCTION
KK2A_GET_DATA_FROM_IDOC
6
SAPLBD20
LBD20F0A
454
FORM
IDOCS_PASS_TO_APPLICATION
5
SAPLBD20
LBD20F0B
69
FORM
IDOCS_PROCESS
4
SAPLBD20
LBD20U05
260
FUNCTION
IDOC_INPUT
3
SAPLEDIR
LEDIRU02
182
FUNCTION
IDOC_START_INBOUND
2
SAPLBD12
LBD12U04
37
FUNCTION
APPLICATION_IDOC_POST_IMMEDIAT
1
RBDAPP01
RBDAPP01
388
EVENT
START-OF-SELECTION
The problem is:
1. When I only have 1 IDOC being processed, SSF_OPEN and SSF_CLOSE happens in the custom FM at the same time. This creates a successful spool.
2. Whereas, when I have 2 or more IDOCS, SSF_OPEN happens in the first IDOC, but then it goes back to the calling program, and then when the last IDOC is encountered SSF_CLOSE is called. The FM SSF_CLOSE in this scenario calls the exception INTERNAL_ERROR (sy-subrc = 2).
The system message is SSFCOMPOSER - 154 - No output request open. End not possible.
Why is this happening? Is it because that other programs (calling programs) may have affected the status of SSF_OPEN? It seems that the SSF_OPEN is no longer open.
Thanks in Advanced,
JackNo, it will not hold the smartform open, but you don't need to hold it open in order for printout to be accumulated in one spool. Spool system does the accumulation automatically, provided the spool requests that are to be added to an existing spool request are:
- generated in the same transaction and
- have the same attributes (such as user, title, output device, client from which the request was issued, number of copies, priority, cover sheet setting, archive mode, and ABAP session number).
Important is: where do OUTPUT_OPTIONS like printer come from currently? Is print parameters popup displayed on first Idoc for user to choose printer and options? Or do you use USER_SETTINGS = 'X' to simply take over defaults from user master? If the print options dialog is displayed, it needs to be controlled as well so it's displayed only once.
Assuming print options come from the user in dialog, the logic without explicit open/close could look somewhat like this:
On first idoc:
- call SSF_OPEN importing JOB_OUTPUT_OPTIONS to display print options dialog; move-corresponding JOB_OUTPUT_OPTIONS to global OUTPUT_OPTIONS;
- set OUTPUT_OPTIONS-TDNEWID = 'X' and clear OUTPUT_OPTIONS-TDFINAL, to ensure new spool will be started (overriding user choices for these parameters!);
- if the user has set OUTPUT_OPTIONS-TDIMMED = 'X' save it globally and clear it;
- set CONTROL_PARAMETERS-NO_OPEN = 'X';
On subsequent idoc:
- clear OUTPUT_OPTIONS-TDNEWID;
- clear CONTROL_PARAMETERS-NO_OPEN;
On last idoc:
- set OUTPUT_OPTIONS-TDFINAL = 'X' (this is not absolutely necessary, but prevents further appending to the spool);
- restore OUTPUT_OPTIONS-TDIMMED from the value saved on first idoc;
Calling Smartform:
- set CONTROL_PARAMETERS-NO_DIALOG = 'X';
- call smartform passing OUTPUT_OPTIONS and CONTROL_PARAMETERS;
The logic is somewhat complicated; I'd wrap it in a class (singleton, which would be de-instantiated after last idoc) to avoid global data and code other than simple method call(s) in FM.
Even if you decide to refactor the logic, it would still be important to understand, I think, why the current logic does not work (where and why smartform gets closed)... Maybe there are some nasty "surprises" somewhere, and your current algorithm should work.
cheers
Janis -
How do i fix my sons ipod touch it says ipod is disabledtry again in 22,181,090 minutes????
You need to connect to a computer with iTunes and restore...start iTunes, connect the USB end of the iPod cable, then while holding the home button on the iPod, connect the 30-pin connector end of the cable to the iPod. The proceed to recover and restore the iPod.
-
System message 38 from work area ssfcomposer does not exist in va03
Hi,
I created a smartform copy from standard, it is working good for all sales order,but for perticular one sale order it shwing error like
system message 038 from work area ssfcomposer does not exist.
i have long item line in this sale order what can i do please help me.
Regards
KKIf I am not wrong, I guess you are using template/table inside your smartform.. which is causing the error.
I issue could be because of the condition on the text inside the template which might be overlapping the output structure line and column. The issue can be also be because of your table cell.
To trouble shoot place a false condition(like 1 = 2) first on table and if error still occurs then remove condition on table and place it on structure.
I guess, the above answer will help you to close the thread.
Regards,
SaiRam -
Sytem message 047 from work area SSFCOMPOSER does not exist
Hi Friends,
When I am trying to see the print preview of a PO I am getting this error msg
"Sytem message 047 from work area SSFCOMPOSER does not exist".
I had checked the forum and the System message was 046, but the error is not solved.
Regards,
Anu.Wrong forum to post the issue.
VJ -
Can't install 10.3.181.34 Windows 7, Firefox
I can't install Flash 10.3.183.5.
When I use the uninstaller and go to the About Flash page, it shows that it is uninstalled.
When I try to install 10.3.183.5, it gives the message, "Can't install because a version is already installed."
Then if I go to the About Flash page, it says "You have 10.3.181.34 installed", and going to Flash Player Settings in Control Panel, it says I have 10.3.183.5 installed.
What is going on?Sure. Here is the last part of it (it's long and dates back to last year):
=O====== M/10.3.183.5 2011-08-18+02-20-18.792 ========
0000 [I] 00000010 "C:\Users\Michael\Downloads\uninstall_flash_player2.exe" -force
0001 [W] 00001036 Software\Macromedia\FlashPlayerActiveX/PlayerPath 2
0002 [W] 00001036 Software\Macromedia\FlashPlayerActiveX/PlayerPath 2
0003 [W] 00001018
0004 [W] 00001037 Software\Macromedia\FlashPlayer\SafeVersions/ 2
0005 [W] 00001037 SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Adobe Flash Player ActiveX/ 2
0006 [W] 00001019
0007 [W] 00001020
0008 [W] 00001037 Software\Microsoft\Windows\CurrentVersion\RunOnce/FlashPlayerUpdate 2
0009 [W] 00001037 Software\Macromedia\FlashPlayerActiveX/ 2
0010 [W] 00001037 Software\Macromedia\FlashPlayer/FlashPlayerVersion 2
0011 [W] 00001037 Software\Macromedia\FlashPlayer/SwfInstall 2
0012 [W] 00001037 Software\Microsoft\Code Store Database\Distribution Units\{D27CDB6E-AE6D-11CF-96B8-444553540000}/ 2
0013 [W] 00001021
0014 [W] 00001036 Software\Macromedia\FlashPlayerActiveX/PlayerPath 2
0015 [W] 00001015 C:\Windows\SysWOW64\Macromed\Flash\NPSWF32.dll 5
0016 [W] 00001037 Software\Microsoft\Windows\CurrentVersion\RunOnce/FlashPlayerUpdate 2
0017 [W] 00001037 Software\Macromedia\FlashPlayerPlugin/ 2
0018 [W] 00001037 Software\Macromedia\FlashPlayer/FlashPlayerVersion 2
0019 [W] 00001037 Software\Macromedia\FlashPlayer/SwfInstall 2
0020 [W] 00001021
0021 [W] 00001036 Software\Macromedia\FlashPlayerActiveX/PlayerPath 2
0022 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/PlayerPath 2
0023 [W] 00001036 Software\Mozilla\Mozilla Firefox\extensions/Plugins 2
0024 [W] 00001036 Software\Opera Software/Last CommandLine 2
0025 [W] 00001036 Software\Opera Software/Last CommandLine 2
0026 [W] 00001036 Software\Opera Software/Plugin Path 2
0027 [W] 00001036 Software\Opera Software/Plugin Path 2
0028 [W] 00001015 C:\Windows\SysWOW64\Macromed\Flash\NPSWF32.dll 5
=X====== M/10.3.183.5 2011-08-18+02-20-23.125 ========
=O====== M/10.3.183.5 2011-08-18+02-20-28.642 ========
0000 [I] 00000010 "C:\Users\Michael\Downloads\install_flash_player.exe"
0001 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/Version 2
0002 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/PlayerPath 2
0003 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/Version 2
0004 [W] 00001037 SOFTWARE\MozillaPlugins\@adobe.com/FlashPlayer/ 2
0005 [W] 00001037 SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Adobe Flash Player Plugin/ 2
0006 [W] 00001036 Software\Mozilla\Mozilla Firefox\extensions/Plugins 2
0007 [W] 00001036 Software\Opera Software/Last CommandLine 2
0008 [W] 00001036 Software\Opera Software/Last CommandLine 2
0009 [W] 00001036 Software\Opera Software/Plugin Path 2
0010 [W] 00001036 Software\Opera Software/Plugin Path 2
0011 [W] 00001015 C:\Windows\SysWOW64\Macromed\Flash\NPSWF32.dll 5
0012 [I] 00000014 C:\Windows\SysWOW64\Macromed\Flash\NPSWF32.dll
0013 [E] 00001025 C:\Windows\SysWOW64\Macromed\Flash\NPSWF32.dll:32
0014 [I] 00000015 C:\Windows\SysWOW64\Macromed\Flash\FlashUtil10v_Plugin.exe
0015 [I] 00000017 C:\Windows\SysWOW64\Macromed\Flash
0016 [I] 00000019 C:\Windows\SysWOW64\FlashPlayerCPLApp.cpl
0017 [I] 00000020 C:\Windows\SysWOW64\FlashPlayerCPLApp.cpl
=X====== M/10.3.183.5 2011-08-18+02-25-44.224 ======== -
Satellite U200-181 Built-in HDD ERROR
I've bought "Toshiba Satellite U200-181" 2 weeks ago. Recently (2-3 days ago) Ive got problem with built-in HDD.
So the problem is that sometimes I'm getting the message "Built-in HDD ERROR" during Notebook startup. This message "Built-in HDD ERROR" appears from time to time and system stops booting from HDD, but can boot from other bootable devices. First time when message "Built-in HDD ERROR" occurred, it was accompanied by lot of strange clapper pop noise from inside of the Notebook. All other
"Built-in HDD ERROR" messages were accompanied with not so loud and strange clapper pop noise, but still with some pop sounds (not as loud as at first time).
To identify possible problems I saved S.M.A.R.T. data log (see appendix#1).
Additional information: After I've purchased the Notebook Ive made successful BIOS upgrade from version 1.40 to version 1.50 strictly according Toshiba official web-site instructions. After BIOS upgrade system worked well, no ERRORS, no faults. But 3days ago I got "Built-in HDD ERROR" message.
Any ideas? Thank you.
Appendix: #1
================================================== ==========
This report created by Active SMART
http://www.ariolic.com/activesmart/
================================================== ==========
S.M.A.R.T. status
Date: 2007/01/18 20:05:32
Model Name: HTS541080G9SA00
Serial number: MPBDL0XKKE3RBG
Capacity: 80.0 GB
Firmware: MB4OC60R
Drive interface: IDE
Current temperature: 35 C (95 F)
Attribute Name Threshold Value Worst Raw value
1 (01) Raw Read Error Rate 62 100 100 0
2 (02) Throughput Performance 40 100 100 0
3 (03) Spin Up Time 33 253 253 55834574849
4 (04) Start/Stop Count 0 100 100 363
5 (05) Reallocated Sectors Count 5 100 100 0
7 (07) Seek Error Rate 67 100 100 0
8 (08) Seek Time Performance 40 100 100 0
9 (09) Power-On Hours 0 100 100 194
10 (0A) Spin Retry Count 60 100 100 0
12 (0C) Device Power Cycle Count 0 100 100 256
191 (BF) G-sense Error Rate 0 100 100 0
192 (C0) Power-off Retract Count 0 100 100 5177348
193 (C1) Load/Unload Cycle Count 0 100 100 4300
194 (C2) Temperature 0 157 157 231929348131
196 (C4) Reallocation Event Count 0 100 100 0
197 (C5) Current Pending Sector Count 0 100 100 0
198 (C6) Uncorrectable Sector Count 0 100 100 0
199 (C7) UltraDMA CRC Error Count 0 200 253 0I recommend you to contact Toshiba service partner in your country as soon as possible. The unit is new one and something like this should not happen. Explain them the situation and you will see what they can do about it.
You can also contact your local dealer and try to exchange the unit to new one. -
Is Flash 10.3.181.34 a 64-bit version?
I am running Fedora 14 64 bit version of Linux and I am having a problem with Flash. When I try to look at what should be a Flash item, I get a blank spot. If I right click in there I get the message Movie not loaded and a place to click About Flash 10.3.181.34. If I go there, I get a screen that lists the current version for different OS's. What I have is the current version. Why is the movie not loaded? I have tried to go to the Settings Manager to check my settings but nothing shows up. I believe that if I go to http://www.adobe.com/software/flash/about/ I should get something moving. I get an empty spot. If I right click there, I get the same messages - movie not loaded and About Flash. I have tried to clear my cache and reboot. Neither fixes the problem. Help!!!!
There are no 64-bit Flash Players from Adobe released yet. But that does nog have to be an issue for you, you only need to have a 64-bit Flash Player if you have a 64-bit browser. If you do have a 64-bit browser and not a 32-bit browser you could the beta 64-bit player that is currently in beta: http://labs.adobe.com/downloads/flashplayer11.html
The usual warnings to using beta software apply. If you try the beta player and have issues with it make sure you report them in the Flash Player 11 forum or directly in the bugtracker if you are familiar with reporting bugs in a software development environment. -
Snow Leopard + Flash 10.3.181.14 Plugin + Freeze
• Mac OS X 10.6.7
• MacPro 12GB RAM
• Latest Safari Build
• Flash Plugin (System Preferences Pane) 10.3.181.14
• Adobe Flash CS4 10.0.2
• Coda 1.7
While all Flash objects in all of my browsers (Safari, Chrome, FF, etc) work perfectly, when using Coda to view the websites (which runs using Safari's webkit engine and resources), certain Flash objects cause the Coda program to freeze, and then Coda needs to be Force Quitted.
This was not an issue with the same version of Coda on Leopard, 10.5.x. I also noticed 10.5.x does not use a Flash plugin preference pane. 10.5 has Flash version 10.2. No such problems there.
Visually, every few times the Flash object in question would load, but it would have visual artifacts and random lines, rather than the actual content. It looks very similar to an overclocked, overheated video card screen. See attached screenshot from Coda, vs. Safari. After the glitch happens, the next load of the SWF file causes a program freeze.
Coda's Browser:
Correct View (Safari):
I was able to view the error log in Coda, and came up with this:
6/2/11 2:57:02 PM [0x0-0x106106].com.panic.Coda[3081] Thu Jun 2 14:57:02 mac.domain.com Coda[3081] <Error>: CGBitmapContextCreate: unsupported parameter combination: 8 integer bits/component; 32 bits/pixel; 3-component color space; kCGImageAlphaPremultipliedFirst; 536612288 bytes/row.
6/2/11 2:57:02 PM Coda[3081] NSExceptionHandler has recorded the following exception:
NSUncaughtSystemExceptionException -- Uncaught system exception: signal 10
Stack trace: 0x951d6378 0x90a8c45b 0xffffffff 0x92895f60 0x92896897 0x9261bf05 0x9261b2d0 0x9261af18 0x924fdc35 0x93cf782a 0x93cf64c8 0x924fd79a 0x93cf67fd 0x93cf67fd 0x93cf67fd 0x93cf67fd 0x93cf67fd 0x93cf49e7 0x93cf595c 0x93cf595c 0x93cf595c 0x93cf595c 0x93cf595c 0x93cf595c 0x93cf595c 0x93cf595c 0x93cf595c 0x93cf455b 0x93cf0ea2 0x93c51a57 0x93c1ad40 0x93c4c28a 0x9091de02 0x908d9d8d 0x908d9464 0x908d9291 0x90123e04 0x90123bb9 0x90123a3e 0x93c2278d 0x93c21fce 0x93be4247 0x93bdc2d9 0x2a82 0x29a9 0x2
6/2/11 2:57:03 PM Coda[3081] A possible error occurred: (NSUncaughtSystemExceptionException) Uncaught system exception: signal 10
NSExceptionHandlerUncaughtSignalHandler (in ExceptionHandling) + 65
_sigtramp (in libSystem.B.dylib) + 43
0xffffffff
CAOpenGLLayerDraw(CAOpenGLLayer*, double, CVTimeStamp const*, unsigned int) (in QuartzCore) + 1026
-[CAOpenGLLayer _display] (in QuartzCore) + 512
CALayerDisplayIfNeeded (in QuartzCore) + 621
CA::Context::commit_transaction(CA::Transaction*) (in QuartzCore) + 362
CA::Transaction::commit() (in QuartzCore) + 316
-[WebHTMLView drawRect:] (in WebKit) + 629
-[NSView _drawRect:clip:] (in AppKit) + 3510
-[NSView _recursiveDisplayAllDirtyWithLockFocus:visRect:] (in AppKit) + 1600
-[WebHTMLView(WebPrivate) _recursiveDisplayAllDirtyWithLockFocus:visRect:] (in WebKit) + 266
-[NSView _recursiveDisplayAllDirtyWithLockFocus:visRect:] (in AppKit) + 2421
-[NSView _recursiveDisplayAllDirtyWithLockFocus:visRect:] (in AppKit) + 2421
-[NSView _recursiveDisplayAllDirtyWithLockFocus:visRect:] (in AppKit) + 2421
-[NSView _recursiveDisplayAllDirtyWithLockFocus:visRect:] (in AppKit) + 2421
-[NSView _recursiveDisplayAllDirtyWithLockFocus:visRect:] (in AppKit) + 2421
-[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectForView:topVi ew:] (in AppKit) + 711
-[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectForView:topVi ew:] (in AppKit) + 4668
-[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectForView:topVi ew:] (in AppKit) + 4668
-[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectForView:topVi ew:] (in AppKit) + 4668
-[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectForView:topVi ew:] (in AppKit) + 4668
-[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectForView:topVi ew:] (in AppKit) + 4668
-[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectForView:topVi ew:] (in AppKit) + 4668
-[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectForView:topVi ew:] (in AppKit) + 4668
-[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectForView:topVi ew:] (in AppKit) + 4668
-[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectForView:topVi ew:] (in AppKit) + 4668
-[NSThemeFrame _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectForView:topVi ew:] (in AppKit) + 265
-[NSView _displayRectIgnoringOpacity:isVisibleRect:rectIsVisibleRectForView:] (in AppKit) + 3309
-[NSView displayIfNeeded] (in AppKit) + 818
-[NSWindow displayIfNeeded] (in AppKit) + 204
_handleWindowNeedsDisplay (in AppKit) + 696
__CFRunLoopDoObservers (in CoreFoundation) + 1186
__CFRunLoopRun (in CoreFoundation) + 557
CFRunLoopRunSpecific (in CoreFoundation) + 452
CFRunLoopRunInMode (in CoreFoundation) + 97
RunCurrentEventLoopInMode (in HIToolbox) + 392
ReceiveNextEventCommon (in HIToolbox) + 354
BlockUntilNextEventMatchingListInMode (in HIToolbox) + 81
_DPSNextEvent (in AppKit) + 847
-[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] (in AppKit) + 156
-[NSApplication run] (in AppKit) + 821
NSApplicationMain (in AppKit) + 574
_start (in Coda) + 216
start (in Coda) + 41
0x00000002 (in Coda)
However, I could not find any issues in the console raised directly by Flash or Adobe. I'll be cross posting this in the Coda user support group.
What's going on here? Why would this only happen through Coda, which is basically using Safari's engine?I should add that the SWF object in question here is being loaded dynamically through a lightbox style jQuery plugin. The SWF itself is using SWFobject2 to load. Finally, the SWF object's parent containers are often switched between display: none and display: block.
Again, only the built-in Coda browser has issue with all of this. -
Local A.-Group A. Differences TType 181 "Clearing Down Paymt" CIP aseets
Hello,
In Assets under construction, in the Asset values I have differences between Local Area and Group Area for TType 181 "Clearing of down payment from current fiscal year". The amount in the Local Area is different and bigger. If I go inside the posting I see like 3 posting (amount 493552,62) for TType "Clearing of down payment"
001 25 11278 FOCKE AND CO (GMBH) 00 00 00 117.144,36
002 39A 11278 FOCKE AND CO (GMBH ) P4 00 00 00 117.144,36-
003 40 245385 RO Output VAT payabl P4 00 00 00 22.257,43
004 50 162385 RO Input VAT on purc P4 00 00 00 22.257,43-
005 75 1660300 007500000069 0000 00 00 00 117.144,36-
006 40 1660230 FDwnpmtClrngccntdj0 00 00 00 117.144,36
In the Group Area the amount is 173030,65 for TType 181"Clearing of down payment"
001 40 166023 FAdownpmntClrngAccnt 00 00 00 173.030,65
002 50 166030 DownpaymntFixedAsset 00 00 00 173.030,65-
Why I have this differences for the same Co.Code with CIP assets?
B.Regards
FranciscoThanks Sriniva,
But I think this is not customizing or I can´t find the reason, because for this Company, (Romania)
Depreciation Area currency:
01 Local area - ROL RON NewRomanianLeu 0
30 Group area - ROL RON NewRomanianLeu 1 (refer. depreciat. area that provides values)
And related the currency company 1st Local is RON and 2nd is USD
-->I see the same values (amount) in Local Area and Group Area, except for the TTYPE 181 "Clearing of down payment from current fiscal year" and the document generated I that I sent before with the 6 positions , instead 2 positions.....
Regards
Francisco -
Adobe Flash Player 10.3.181.34 - Not Working?
Hey,
So I have windows 7, 64-bit operating system and I use Mozilla Firefox (32-bit) as my browser. I have yet to try other browsers and I have downloaded the 32-bit version for the use of the flash player. But almost any website that requires flash, doesn't work (which is a large portion of the internet). I'm at a loss, I've reinstalled it, re-started my computer, re-installed firefox,
Any ideas?
ThanksWhat Firefox version do you use?
FP 10.3.181.34 works fine for me on Firfox 3.6.18 and 5.0
Can you see the Flash animation at http://www.adobe.com/software/flash/about/ ?
Regarding your problem, can you be more specific what you mean by "not working" - what are the exact symptoms?
Finally, what files do you have in C:\Windows\syswow64\Macromed\Flash? -
Problem with 10.3.181.14 and FF browser problems
I just installed 10.3.181.14 and I immediatedly encountered a problem with FF 3.6.17 cache. When I run CCleaner I never had a problem until now. It keeps saying the FF is still open and it's not. When I figured it out that it had something to do with FP it figured I would uninstall FP from the control panel and try again. I was able to uninstall FP for IE, but, was, not able to uninstall FP fpr FF. It said FF browser was open and it wasn't. I finally resorted to doing a system point restore, going back one day, and now everything works as it should using FP 10.2.159.1 Does anybody have any insight into this problem?
Thanks for the reply. I did, in fact, check the task manager, and I didn't see it running. There was no FF tab in the task bar either. While I might understand the problem trying to uninstall FP I don't get it with running CCleaner which is neither an installer or uninstaller. As soon as I went back to the previous version of FP everything was working as it should. I can only assume it had something to do with the new version FP,what, I don't have a clue. By-the-way, I'm running Vista OS.
-
How can I see the quantity of battery cycles on Satellite U200-181?
I have Satellite U200-181, and I use it hard, every. I want to be ready replace my battery, when it will have 400 cycles.
How can I see the quantity of battery cycles on my laptop?You must not see this. You will see that capacity of the battery drops down and will be empty after short time. Nobody say that you will be able to use battery 400 cycles only. Maybe you will be lucky and the battery will have longer life time.
My Tecra M1 is about 4 years old and still working with original battery.
Your question is pretty unusual and I am really interested about further comments.
Maybe you are looking for
-
How do i track my ipod if it has the same apple id as my iphone?
i lost my ipod touch and i know it has the track my iphone app. but it also uses that same apple id as my iphone. so when i try to track it on my iphone it tells me that it found my iphone but not my ipod touch. in case i lost it somewhere at home th
-
I shut down new update in middle-now I have nothing
Well I got up this morning to an update that said it would take 10 mins. So an hr later I still see it circling, I thought it was frozen. I couldnt power down or anything, so I pulled battery. Apparently some update took place as the new home scree
-
Connect pb to tv and console to pb
hi everybody, I would like to know which adapter i have to buy to connect my pb12 to a tv to watch dvds. in the store i have found 2 products which seem to do the job. i would also like to know whether i can then connect my nintendo gamecube to my po
-
I have a question about iTunes and whether or not it is better to "manage" your iTunes library on a Mac or Windows. Maybe, the answer is there isn't really a difference. However, I would think that since iTunes is a Apple product and a Mac is an Ap
-
Where should I move the report for my form to be able to see it
I need to run a report from my 9i form. I'm suing run report object. I'm repeatedly running into the error FRM-41219 cannot find report - Invalid ID where should i copy my rep file under 9ids for my form to be able to see it. Thanks