Where should I move the report for my form to be able to see it

I need to run a report from my 9i form. I'm suing run report object.
I'm repeatedly running into the error FRM-41219 cannot find report - Invalid ID
where should i copy my rep file under 9ids for my form to be able to see it.
Thanks

Frank
REP-0503 "You did not specify the name of a rep
I created the report object in my object navigator, selected the report filename and in my when button pressed I have the following
DECLARE
     REPID REPORT_OBJECT;
     V_REP VARCHAR2(100);
     REP_STATUS VARCHAR2(20);
BEGIN
     REPID := FIND_REPORT_OBJECT('REPORT125');
V_REP := RUN_REPORT_OBJECT(REPID);
END;
This gives me the following error
REP-0503 "You did not specify the name of a report".
Now I change the execution mode to runtime, and communication mode to asynchronous and I dont get the error, but the report does not come up either.
Please Help

Similar Messages

Where can we get the data for pre calculated reports

Hi,
i want to see the data for pre calculated reports (Reporting agent)
where can we get the data for pre calculated reports
Thanks & Regards,
Shaliny. M

Dear,
This feature of precalculating reports is to enhance the report performance. You will need to schedule this periodically, so that the report is fetched and cached. This allows faster retrieval of report data. Plz. understand that, this scheduling needs to run after every data load in the corresponding cube, so that, the latest data is cached, else the report data will be obsolete.
Thanks

Where should I save the camera calibration profile for Lightroom 2?

I created some DNG Camera Profiles by DNG Profile Editor. For Camera Calibration in Camera Raw, I save those .dcp files in C:\ Administrator\ Documents and Settings\ Application Data\ Adobe\ Camera Raw \ CameraProfiles. However, I could't find such a subfolder in Lightroom folder, does any one know where should I save the dcp files for Lightroom 2? Thank you

It's the same install folder for both Camera Raw and Lightroom (i.e., a .dcp installed in the folder you described will be readable by both CR and LR).
Eric

A Folder "Apple Security_files" is on my desktop. where should I move it?

I have a powerbook G4 running OS X 10.4.6. I also have OS X 10.2.7 on an external hard drive. This is because my Epson perfection 3170 scanner will not work with 10.4 but did work with 10.2 and I'm trying (unsucessfully) to use it.
(But that is another topic) A folder named Apple Security_Files which has 13 gif files, 1 css file (default.css), and 5 png files (a.png thru a_005png) in it. I'm not sure if this folder came out of my 10.4 librays somewhere or my 10.2 library somewhere. It is the only folder with this name that spotlight finds on my system. WHERE SHOULD I MOVE IT TO TO GET IT OFF THE DESKTOP?
Thanks
PowerBook G4 Mac OS X (10.4.6)

Not sure about the name "Apple Security_Files" - but here's a breakdown of the file formats you've noted:
gif = picture/image file
css = "style-sheet" for web page design
png = macromedia fireworks document
If I had to guess... this looks like some part of a web design project.
Hope this helps!
www.briancometa.com

How can I run the report for different input values at the same time?

Reports version: Report Builder 6.0.8.13.1
Oracle version: Oracle8i Enterprise Edition Release 8.1.7.0.0
I want to run the same report for different input parameter values and spool each o/p to different file and ftp to a server. For this, as a first step, I am spooling different input values in to a file, reading those values through a loop and calling the report for that input values. Each report run/execution is taking 15 minutes. Total report execution is taking approximately 4 hours (assuming 16 different input values) to complete. So I have to wait 4 hours to see ALL outputs.
I would like to run the report parallel for ALL the input values and I should be able to see the ALL outputs with in 15 or 16 minutes.
In my shell script, I added & symbol at the end of the report call to start/run the job in the background. Due to this the control passed to the next step after the report call. At this place I have an ftp command to send the output file to a different server and it is giving error some thing like o/p file is not available/created yet". This is due to the fact that report writer is NOT yet completely started/initiated or it is NOT completed the spooling.
How can I run the report at the same time for all the input values and save the time?
Thanks in advance.
Kishore.

Increase the number of server engines running right now it seems there is only one engine running ,increase it to 4 or 6
and then atleast 4 or 6 reports will run simultaneously.
For FTPing the output add to your sript to check whether it is locked and if not then only try to ftp .
Also for more better functionality read the document (chapter 15 ) for 10g reports for its new fuinctionality.
http://download.oracle.com/docs/cd/B14099_17/bi.1012/b14048/toc.htm
Thanks
Subodh

Need to run the report for All Values when Null is passed in parameter

Hi All,
In my BIP report, I am using a parameter :asset with Type as Text, which means user will type the values for the parameter in the text box.
Now, this parameter can take multiple comma separated values. I have a requirement to run the report for All Values when user doesn't enter any value in the parameter text box and if user enters any value(s) then the report will run for those values . The way, I tried to handle that in the query using couple of ways was :
IMP : My Database is SQL Server
where
(table.asset = isnull((:asset), table.asset) or table.asset in (:asset))
Now this works fine when I give a single asset number but when I give multiple values separated by comma like 123, 345 in the text box, then the statement fails saying 'encountered ,'
I also tried simply
table.asset in isnull((:asset),table.asset) -- but this doesn't work as it doesn't allow me to use in operater while using isnull and if i will use = operater then it won't work in case of multiple values
Any suggestions on how can I handle this? Any help would be highly appreciated.
Thanks,
Ronny

thanks for replying, but i tried this option too, it did not work for me, neither isnull nor coalesce. I mean, the solution work for single value but when i pass multiple values then separated by a comma then it doesn't work and shows me an error like "Incorrect Syntax ','". I am using SQL server as DB and bip is 10.1.3.4.1
also please share the SR number, so i can also check the same.
can there be any other work around to this?
thanks,
ronny

Where Should I Set the Layer Break Marker?

I am burning to a Memorex DVD+R DL media------
I received this error message when burning:
"Formatting was not successful. Layer 0 exceeds the
maximum layer size allowed. Please choose a suitable
marker location that will support this condition."
I placed one approx halfway through my main sequence, which
is a total of 4.6 GB, but I am still receiving this message.
Where should I place the marker so I can successfully output?
My total project is about 6.2 GB.

So you are telling me that I could delete the DNS from each machine and set it in either the new modem or Time Capsule router.
That is correct!
I guess what I'm confused at is what device is doing what.
Let's look at a few examples, hopefully to help understand where all these protocols/services (PPPoE, DNS, & DHCP) come into play:
Scenario 1: Modem > Computer
In this scenario, your ISP provides the DNS server IP address information to your computer via DHCP. DHCP also provides the other important IP address information: IPv4 address, subnet mask, & router IP to your computer in order to communicate on the Internet.
Since your DSL ISP requires that you are authorized to access their Internet service, they utilize PPPoE to pass your account credentials (username & password) from your computer to their authorization server. Once verified, you are granted access.
Scenario 2: Modem > Router (Actiontec) > Computer
In this scenario, your Actiontec router provides your account credential (via PPPoE) to the ISP and also acts as a DHCP server. As a DHCP server, it provides your computer with the required IP addresses and passes on the ISP's DNS IP addresses as well. You do have an option with this router to enter a different set of DNS IP addresses ... like those for Google DNS or OpenDNS if you do NOT want to use the ISP's DNS servers. In this case, the Actiontec, uses its DHCP server to provide those addresses to your computer.
Scenario 3: Modem > Upstream Router (Actiontec) > Downstream Router (TC) > Computer
Since you have the TC configured as a bridge, it is basically a "pass-through" device. That is, the Actiontec will continue to provide the IP addresses just like in Scenario 2 "through" the TC so that wired or wireless clients connected to the TC get the addresses. Also, like in Scenario 2, you can assign DNS IP addresses on the TC ... and these would be provided to clients connected to it.

HT3986 Where can i download the driver for my network card? i have a macbook pro mid 2012, and are using windows 7 ultimate

Where can i download the driver for my network card? i have a macbook pro mid 2012, and are using windows 7 ultimate

uhm hey guys,
idk where else to get help so ima try here,
i got windows 8 installed with bootcamp on my macbook pro late 2010 (5, 5) and theres no sound coming out of it, so i installed an nvidia audio driver (idk, it could be the incorrect one) but i have nvidia GeForce 320 on my macbook.
do you know what i should install ?
but when i go onto my osx the sound is fine, so i figured im missing something on windows 8
Orrrr could i just go out and get parallels and hope it doesn't get the same problems?

Where should i call the rfc function module? in xi or in r/3

where should i call the rfc function module?
for the synch scenario: file < -- > xi <---> rfc
i know the type of rfc is tcp/ip; but i'm not sure with the followings,
and with some trials i can not even see any message via rwb even all the setting
can be activated without errors.
where should i create the rfc destination? in r/3 or xi
where should i call the rfc via abap program? in r/3 or xi
i guess the calling program should belong to the different server with the rfc itself....
so confused....
Thanks for your reply!!
Jun

if i create the destination in xi point to r/3, then i call the rfc use the destination in r/3 right ?
The call doesnt use the destination in R3. XI has the RFC destination which is just used to connect to the R3 system
but where i need to create the fm via se37? in xi or r/3 ?
In R3
Regards,
Prateek

Where should i put the DEFAULT&SMARTBAR

Hello,
where should i put the DEFAULT&SMARTBAR ? and the main Menu ?
in order to be shown in each form..
in using Forms 6i.
Regards,
Abdetu..

Hello Gerd,
Thanks for reply..
put such things into *a reference form* what is meant by a reference form do u mean the main form?
Create a property class (PC) for your FORM-MODULE-properties,
put this PC into the reference form.
Create there an object group (OG), put the PC into the OG and the inherit the OG to your local form.
Automatically you have then the PC inherited too.i did all what u mentioned..
Bbut the problem is that the DEFAULT&SMARTBAR
can't be seen in allllllllllll my forms in the main menu inspite of i put it into the form module property ->in the intial menu property.
Regards,
Abdetu..

Where should I have the create table

I am making an application which it has a customer, an order and a food objects.
I know that I can do it in one class (which will have main inside) but I am trying to make it as object oriented..
so.. I have to make a class for a customer, a class for food, and I will handle all this in another class which will have main method..
am I right up to here??
if yes I was now wondering where should I have the sql statment about creating the table.. my thought is to have it at the constructor so when I will make a customer object the table will be created..
then I will have an add_data(d1,d2,d3,d4....) method where I will insert the data to my database for each customer.. actually only one time I will make a customer object from main and then through this I will call add_data() method to add customers to my database..
Am i thinking right or I am too far away from what I must do...?
Thx

Doesn't particularily matter given that the application is small.
However in larger applications the database is created outside of the application usually using a SQL script.

Where should I put the sevlet

I just started to work with Tomcat and I compiled the helloWorld sevlet.
It's said from a book that the sevlet should be placed in serlver_root/webapps/ROOT/WEB-INF/classes, however there isn't a "classes" folder in my WEB-INF folder. So I put the helloWorld sevlet in the WEB-INF folder.
Then I type http://localhost:8080/servlet/helloworld in my browser, I get a message from the sever said "The requested resource (/servlet/HelloWorld) is not available".
Could anybody tell me how can solve this prolbem, where should I put the sevelt?

have ones more a look to your book - especially to information about the configuration file "web.xml" which also should be placed in the WEB-INF folder. This file defines which servlets should be found by the server and which request-URL should be mapped to this servlet.
for examples concerning the web.xml file see those already defined in your server. copy one and edit it for your needs. if you really want to understand what else might be configured using web.xml see the DTD for this file - it's pretty good documented!
hope it helps :)

Where should I store the collatoral files that are associated with photos stored in lightroom?

Where should I store the collatoral files that are associated with photos stored in lightroom? Items such as pdf files, word documents, etc. How should I connect them to each other so I can find both the photo and the related data?

Lightroom itself will not help you with pdf, word, etc.
However, there is a plugin you can use called AnyFile which will allow you to manage these documents in Lightroom (by assigning keywords and other metadata) so that you can search for all documents (photos, pdf, word, music, powerpoint, etc.) with given metadata.
Because you do this via metadata, it doesn't matter where you put these files. Put them anywhere you want.

Where can I get the javadocs for javax.midroedition.sip ?

I downloaded and installed the Wireless ToolKit. It appears to contain the jar files for JSR180 (SIP) but there are no javadocs for SIP.
Where can I download the javadocs for javax.microedition.sip ??

The driver should be already included with your OS.
Canon drivers are here.
EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
Photoshop CS6, ACR 9, Lightroom 6

Where should I send my iPhone for warranty?

If I purchase my iPhone from http://www.apple.com/my/ (Malaysia), where should I send my phone for warranty?
Note: There is no Apple store in Malaysia

This is how for Malaysia
Service
How do I obtain service for my iPhone?
The iPhone support site has troubleshooting articles to help you solve your iPhone issue on your own. If you have reviewed those articles and still need service for your iPhone, you can contact your carrierif you purchased your iPhone from a Malaysia carrier or contact Apple if you purchased your iPhone from the Apple Online Store. Note: There may be a fee for diagnostic service. Please do not send any accessories with your iPhone because they will not be returned to you.
The blue text is a link to the details

Where should I move the report for my form to be able to see it

Similar Messages

Maybe you are looking for