Ssh operation time out

In my office, I have a MacBook and a Mac Pro. I tried to ssh to the Mac Pro from the Macbook and got the "operation time out" error. I am able to ssh to a Linux box from my Macbook.
Anybody has encountered this? Thanks.

I solved the problem.
I should select "set access for specific services and applications" in Preferences/Security/Firewall.

Similar Messages

The wait operation time out

Dear all,
I am facing one problem with my user pc "The wait operation time out"
ERROR=
Aconnection was successfully established with the server. but then an error occurred during the pre-loging handshake. (provided , SSL providing error-0 , The wait operation time out microsoft SQL server error- 258.
my user-pc use windows 7 and connect VPN by using "Sonic-wall" we connect successfully and get my remote server IP ping reply but when try to access remote server database that time I am getting this error
At the same time using same network and id can connect the server from vpn and access database from other
system.
please help me sort it out this issue.
thanks
sajal

Hi Sajal,
It is possible that remote machine(server) is up but please check whether database server is up or not.
Please contact database administrator to know the status of database. This will help you to know the cause.
If database is down you cannot connect it.

ORA-12535 TNS:Operation time Out and ORA-12154:TNS Could not resolve servic

Greetings!!!
I have installed my Oracle Database 10g & Developer Suite 10g in Windows XP Pro Machine. Oracle Application Server 10g is also installed in Windows 2003 Server machine.Both machine have different domain.When using Form Developer Suite OC4J to run my form program, i can connect to the database properly run the form perfectly.
Problem encountered.
When I tried to run the form using Application Server 10g(installed in Windows 2003 Server), I got an error ORA-12154:TNS Could not resolve service name when connecting to the database and I got an error ORA-12535 TNS:Operation time Out when using TNSPing. I checked both the configuration of TNSNAMES.ORA(database & Application SErver) using the same port & service name but still got the same error.
Hope somebody can help me out there...
Many thanks in advance.
Regards,
BTF

I have seen this before with my setup, I found that I had to go into the net configuration assistant, and change my host name to the fully qualified name, example: my compuer name is computer1, I had to enter in computer1.OIT.Docfinity.com for it to take. That has always gotten me past that TNS error, just my 2 cents, hope it helps.
keep on keeping on.

Sockets - BufferedReader.read() operation time-out

Hi all,
I'm facing some problems to receive data over socket connection from a PC. I send data via BufferedWriter, but I have time-out error (IOException: Operation timed-out) and I can't see why it happens.
Here is part of my code:
StringBuffer strBuffer = new StringBuffer();
          int charRead;
          File xmlFile = null;
          FileWriter fw = null;
          try{
               if(s != null){
                    bufReader = new BufferedReader(new InputStreamReader(s.getInputStream()));
               xmlFile = new File(fileName);
               if(xmlFile.exists())
                    xmlFile.delete();
                    xmlFile.createNewFile();
                    fw = new FileWriter(xmlFile);
               }else{
                    connect();
               //while((line = bufReader.readLine()) != null)
               while((charRead = bufReader.read()) > -1)
                    strBuffer.append((char)charRead );
               bufReader.close();
               String writeString = strBuffer.substring(4);
               if(fw == null){
                    setErroSocket(true);
                    setMsgErroSocket("I/O Error: Erro recebendo dados via Socket");
               fw.write(writeString);
               fw.flush();
          }catch(IOException ioE){
               setErroSocket(true);
               setMsgErroSocket("I/O Error: " + ioE.getMessage());
          return xmlFile;
If nore detailed information is need, please ask me.
Thanks for any help !

Hi,
I believe I found where was the problem. I was a bit confused with setSoTimeout(), because I thought it set the limit of time for read bytes, but in fact it controls the limit of time that conection is off. Looking a little deeper in my code I saw that bytes are read, but the exception occurs the same way.
I just need to change some things because I need a permanent client socket on-line because I'll need constantly comunication with a server application (Delphi) running on a PC. I believe that I must start with changing my ClientSocket class into a Thread.
Thanks for your help !

IFS-21030 Database Operation time out

Hi everyone,
I really need help with this one. I try to search for a folder with a certain value for a custom attribute. It ALWAYS takes a very long time, but some times it returns successfully and sometimes it gives me a "Database Operation timed out" IFSException.
I tried to change the attribute setting to make it indexed, but it didn't help.
I'm using Oracle Files 9.0.2 (which, I think uses CM SDK 9.0.3, or at least this is the jar I'm using on the client side).
This doesn't happen with all folder queries, just the query where I use the
FolderRestrictQualification.setMultiLevel(true)
Can anyone help me with this?

setMultiLevel(true) enables folder recursion, of course, which can be an expensive operation, depending on how many levels deep you need to go.
how many subfolders (and documents) are we talking about here?
.rich

System I/O Operation Time-out

I am running iTunes 6.0.5 for Windows. When I try to sync to load about 200 songs on my iPod nano (1st generation)I get the error "The specified I/O operation on drive G: was not completed before the time-out period expired." If I am lucky I might get one or two songs downloaded to my iPod at a time. Any help that could be offered would be greatly appreciated.

I am running iTunes 6.0.5 for Windows. When I try to
sync to load about 200 songs on my iPod nano (1st
generation)I get the error "The specified I/O
operation on drive G: was not completed before the
time-out period expired." If I am lucky I might get
one or two songs downloaded to my iPod at a time.
Any help that could be offered would be greatly
appreciated.
Is the iPod Nano connected to a USB 2.0 port, or a USB 1.1 port?

Operation time out

After successful deployment of my wcf service to staging or production I get the following message when I browse to the url:
<big>Network Error (tcp_error)</big>
A communication error occurred: "Operation timed out"
The Web Server may be down, too busy, or experiencing other problems preventing it from responding to requests. You may wish to try again at a later time.
There is nothing to tell me what the problem could be. The service is running. However, the endpoint status is "down"
If I create a new wcf service and deploy it then it works fine, which leads me to believe that there is something wrong with the config file. Any ideas?

some times this massage may be received because of the name resolution problem, so simply open your tnsnames.ora and listener.ora file and replace the HOST name with the IP address of the system where the oralce database has been installed. Thats it. Try it, good luck
ex: HOST = 192.1680.20 it my server IP address
check my tnsnames.ora and listener.ora files
# tnsnames.ora Network Configuration File: E:\oracle\product\10.2.0\db_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORACLE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.20)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = oracle)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
# listener.ora Network Configuration File: E:\oracle\product\10.2.0\db_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = ORACLE)
(SID_NAME = PLSExtProc)
(ORACLE_HOME = E:\oracle\product\10.2.0\db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.20)(PORT = 1521))
Edited by: 935918 on May 23, 2012 10:12 PM

IIS Manager 6.0 Wait Operation Time Out on connecting to remote server

I'm looking to configure SMTP on Server 2012 Core, I've installed the feature and remote management/administration tools and web management console and web management compatability. When I attempt to connect via IIS 6.0 Manager I immediately receive "The
wait operation timed out"
I've removed and re-installed the SMTP-Server feature without success
any suggestions would be appreciated.

I encountred this issue the IIS 6.0 requires the SMTP if you want to configure the remote management of the Server Core then try to follow this youtube podcast
watch?v=Pim1T6z6DJM Configure a Win 7 machine to control
of this serie that shows how to install and configure a web server core from A to Z
http://www.youtube.com/playlist?list=PLzayUN5B2cXMoyziV4oUs94P6EZT6QVmc
watch?v=5z1NiWUJdGU Wipe generation
watch?v=Q3BoLkWWAC4 hard disk preparation
watch?v=lOPvy-cn0Uk server core installation
watch?v=gTnOUJfRkDg configure the web server
watch?v=0ofvknXMNsc install .net framework in the webserver
watch?v=K4ADBzZeM6E install the web server role
watch?v=oGHC0sbe17Y remote control the server
watch?v=SpzAsRkjV40 continue the remote configuration
watch?v=XjPD8U_y29I Create and alias for the web server
watch?v=Pim1T6z6DJM Configure a Win 7 machine to control
Enjoy the vids
The complexity resides in the simplicity Follow me at: http://smartssolutions.blogspot.com

Unable to download firefox, operation times out

Tried to download firefox with internet explorer, at 99% is says operation timed out
== This happened ==
Not sure how often
== downloaded firefox ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; .NET CLR 1.0.3705; Media Center PC 4.0; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; OfficeLiveConnector.1.4; OfficeLivePatch.1.3)

[[Installing Firefox on Mac]] is somewhat detailed on how to do the install.
The requirements [http://www.mozilla.com/en-US/firefox/5.0beta/system-requirements/ are]:
''Operating Systems''
*Mac OS X 10.5
*Mac OS X 10.6
''Recommended Hardware''
*Macintosh computer with an Intel x86 processor
*512 MB of RAM
*200 MB hard drive space
What is that doesn't work for you? Could you please give more details?
Thank you.

Ssh: Operation timed out

running 10.4.5 server and 10.4.5 on clients; network setup with different subnets (wlan, gigabit-ethernet):178-net for wlan and 2-net for gigabit-ethernet; dns-service for both subnets supplied by server;
server: host g4d003.local gives 192.168.178.5 as does host g4d003.2-net; reverse lookup gives g4d003.2-net
server: ssh [email protected] works well while ssh [email protected] always timed out (as does ssh [email protected])
when trying to ssh from wlan-client to any client in the gigabit-subnet and vice versa the command timed out, too
the firewall didn't report any denial
what do i mess up???
Power Book G4, PowerMac G5 Mac OS X (10.4.2)

Compare the output of "ssh -vvv ..." on the two clients.

TNS - 12535 - Connection Operation Time Out

i m getting this error again and again. to overcome this problem, i have searched
CONNECT_TIMEOUT parameter to asign '0' zero vaue, to get higher higher time in listner.ora, but there is no any such parameter in it.(as suggested my teacher) hence i reconfigured my listner, the said prob get solved. but the next day i found the same error. what should be do? is there any solution?
thanx in advance

from the client (using dos command prompt)
tnsping instance_name
Also check your tns_names file on the client and make certain you are pointing at the correct machine. Check the machine and make certain the listener is listening for the correct alias.
Something is not working correctly.
Are the other clients having the same problems or are they able to connect?
Wayne

Xmlviewservice.executeSQLQuery TIME OUT ERROR

Hello OBIEE Experts,
I got stucked with the command line xmlviewservice.executeSQLQuery(...) method of OBIEE as operation time out. Actuall i am writing dot net source code to retrive the xml result by passing the query created in Oracle BI Answer page. This method runs fine when running a very simple query returning only two rows. However when i set to use a query that takes around 10 min running in OBIEE answer section, the above method fails. It returns an error Operation Time out. I have even try setting sawservice & xmlviewservice timeout but no use.
Is there any way to handle sql execution time using OBIEE SAW web service functionality ? Please find below code that i have used.
Imports saw = Obiee_Services.web_Reference
Dim sawservice As New saw.SAWSessionService
Dim sessionid = sawservice.logon("xxx", "xxx")
sawservice.Timeout = 60000
'Dim curUser As String = sawservice.getCurUser(sessionid)
'Dim repref As New saw.ReportRef()
Dim xmlviewservice As New saw.XmlViewService
Dim xmlQueryExecutionOption As New saw.XMLQueryExecutionOptions
xmlQueryExecutionOption.maxRowsPerPage = 10
xmlQueryExecutionOption.refresh = True
Dim repid As String = "Report1"
Dim repParams As New saw.ReportParams
Dim repHtmlOP As New saw.ReportHTMLOptions
Dim QueryResult As New saw.QueryResults
xmlviewservice.Timeout = 60000
QueryResult = xmlviewservice.executeSQLQuery(qry, Obiee_Services.web_Reference.XMLQueryOutputFormat.SAWRowsetData, xmlQueryExecutionOption, sessionid)
Dim rstring As String = QueryResult.rowset
Dim i = WriteToFile("text.xml", rstring)
Regards,
Rajen Singh

Thank you for the reply.
I do agree that i have omitted logging out command line and WriteToFile() definition. The below executesqlquery command is a syncronous call. I do not think it will be a problem with the next two or three lines. Below mentioned command line will not be released by the compiler until and unless it is completed. MOreover i am sure that the two mentioned command line does not have to do much on the issue becouse the error message is associated with below line and also works fine on simple query.
QueryResult = xmlviewservice.executeSQLQuery(qry, Obiee_Services.web_Reference.XMLQueryOutputFormat.SAWRowsetData, xmlQueryExecutionOption, sessionid)
I have tested other work around to resolve the current error i.e "Operation Time Out" error atleast(applying other configuration setup and increasing timeout properties). Having resolved sucessfully the next issue is on the below line. Blank rowset is returned each time. I can get an ID on QueryResult.QueryId and QueryResult.Finished=false.
Dim rstring As String = QueryResult.rowset
Finally, in OBI Presentation Services, the query runs fine in a specific time.

ADFS setup "operation timed out"

I am getting operation timed out while setting up ADS . I checked the event viewer , came across" certificate exceeds xxx milli seconds" please help in this regards .
As part of this issue i was trying to change the value of timeout value at webconfig lkevel for that web application port,but this is not the recommended one. please help me with the exact fix.
Appreciate the help
Blitz

Hi,
According to your post, my understanding is that you got operation time out while setting up ADFS.
The token-signing certificate CRL (revocation List) location must be accessible from SharePoint. Otherwise you will get the time out error.
You can check with the token-signing certificate CRL, then check whether it works.
http://777notes.wordpress.com/2012/12/20/sharepoint-2013-single-server-deployment-on-windows-server-2012-claim-based-authentication-cloud-simulation/
What’s more, as the issue is related to ADFS, if you still have issues about it, you can post your question to the ADFS forum.
http://social.msdn.microsoft.com/Forums/en/Geneva/
Thanks for your understanding and support.
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

"ARP time-out" command on Catalyst Switches

Hopefully this would help to all of you that have packet loss or TCP retransmissions, due to the fact that the ARP timeout is an absolute timer and not an activity timer like the MAC Address Table Aging Time.
This is an expected behavior in this type of switches (3750X). When we generate an ARP entry in software, that entry gets programmed into hardware and is not touched again until it is time for a refresh. The refresh happens 1 minute prior to expiration
Therefore, when trying to apply the "ARP timeout" command, be sure to use a timer higher than 1 minute, in order to have, as told before, the 1-minute timer to refresh the ARP table.
Sadly, this is not a bug behavior or something like that, basically, that is how the protocol works.
Anyway, Thanks all for the attention given.

Hi,
I am currently using 12.2(58)SE2 on the 3560.
Cisco IOS Software, C3560 Software (C3560-IPSERVICESK9-M), Version 12.2(58)SE2, RELEASE SOFTWARE (fc1)
I downgraded my IOS to check if it's still supported for the 3560 on 12.2(55)SE1 and it's not.
XXX uptime is 1 minute
System returned to ROM by power-on
System restarted at 14:38:50 GMT Tue Jul 29 2014
System image file is "flash:/c3560-ipservicesk9-mz.122-55.SE1.bin"
XXX(config)#ip ssh ?
authentication-retries Specify number of authentication retries
dscp                    IP DSCP value for SSH traffic
logging                 Configure logging for SSH
precedence              IP Precedence value for SSH traffic
source-interface        Specify interface for source address in SSH
                          connections
time-out                Specify SSH time-out interval
version                 Specify protocol version supported
XXX(config)#ip ssh
I then upgraded to 12.2(55)SE9 and it's still not supported.
XXX uptime is 1 minute
System returned to ROM by power-on
System restarted at 14:47:49 GMT Tue Jul 29 2014
System image file is "flash:/c3560-ipservicesk9-mz.122-55.SE9.bin"
XXX(config)#ip ssh ?
authentication-retries Specify number of authentication retries
dscp                    IP DSCP value for SSH traffic
logging                 Configure logging for SSH
precedence              IP Precedence value for SSH traffic
source-interface        Specify interface for source address in SSH
                          connections
time-out                Specify SSH time-out interval
version                 Specify protocol version supported
XXX(config)#ip ssh
I would recommend that you upgrade but I don't see any point unfortunately.
Thanks,
Nehmaan

Connection times out constantly.

When browsing in Firefox, it constantly times out.
Sometimes it does it after 15 mins and sometimes it takes an hour or better.
I need help, the only way to get it going again is to reboot and frankly that is getting old.

Hi Carey,
Thank you for responding. No, we don't have any firewalls I think...Hmm strangely the crash doesn't seem to appear int he FTP Log. Here is the log from roughly the time of the "Operation Time Out":
> LIST
< 150 Opening data channel for directory list.
< -rw-r--r-- 1 ftp ftp           3743 Sep 10 09:38 content.ascx
< -rw-r--r-- 1 ftp ftp           4861 Sep 07 12:42 home.ascx
< -rw-r--r-- 1 ftp ftp           3034 Sep 10 09:47 ie8.css
< drwxr-xr-x 1 ftp ftp              0 Sep 07 12:53 images
< drwxr-xr-x 1 ftp ftp              0 Sep 06 11:05 includes
< -rw-r--r-- 1 ftp ftp           3373 Sep 10 09:38 OnePane.ascx
< -rw-r--r-- 1 ftp ftp          20116 Sep 10 09:43 skin.css
< 226 Transfer OK
> CWD /
< 250 CWD successful. "/" is current directory.
> CWD /lis-con.com.au/Portals/0/Skins/Liscon/images
< 250 CWD successful. "/lis-con.com.au/Portals/0/Skins/Liscon/images" is current directory.
> PWD
< 257 "/lis-con.com.au/Portals/0/Skins/Liscon/images" is current directory.
This is the "Background File Activity":
Started: 10/09/2012 9:48 AM
Operation timed out. Cancelling...
Operation timed out. Cancelling...
Operation timed out. Cancelling...
Operation timed out. Cancelling...
Operation timed out. Cancelling...
Operation timed out. Cancelling...
Operation timed out. Cancelling...
Operation timed out. Cancelling...
Operation timed out. Cancelling...
lis-con.com.au\Portals\0\Skins\Liscon\images\icon_topphone.svg - user cancelled
Operation cancelled.
Finished: 10/09/2012 9:53 AM
It's just a little bit frustrating that it takes it 5 minutes to time-out. Is there any way to set time-out settings? Also, if you try and cancel out of the time-out that's when it just stops and you need to force-quit.
Thank you again for taking a look at this!

Ssh operation time out

Similar Messages

Maybe you are looking for