TNS - 12535 - Connection Operation Time Out

i m getting this error again and again. to overcome this problem, i have searched
CONNECT_TIMEOUT parameter to asign '0' zero vaue, to get higher higher time in listner.ora, but there is no any such parameter in it.(as suggested my teacher) hence i reconfigured my listner, the said prob get solved. but the next day i found the same error. what should be do? is there any solution?
thanx in advance

from the client (using dos command prompt)
tnsping instance_name
Also check your tns_names file on the client and make certain you are pointing at the correct machine. Check the machine and make certain the listener is listening for the correct alias.
Something is not working correctly.
Are the other clients having the same problems or are they able to connect?
Wayne

Similar Messages

ORA-12535 TNS:Operation time Out and ORA-12154:TNS Could not resolve servic

Greetings!!!
I have installed my Oracle Database 10g & Developer Suite 10g in Windows XP Pro Machine. Oracle Application Server 10g is also installed in Windows 2003 Server machine.Both machine have different domain.When using Form Developer Suite OC4J to run my form program, i can connect to the database properly run the form perfectly.
Problem encountered.
When I tried to run the form using Application Server 10g(installed in Windows 2003 Server), I got an error ORA-12154:TNS Could not resolve service name when connecting to the database and I got an error ORA-12535 TNS:Operation time Out when using TNSPing. I checked both the configuration of TNSNAMES.ORA(database & Application SErver) using the same port & service name but still got the same error.
Hope somebody can help me out there...
Many thanks in advance.
Regards,
BTF

I have seen this before with my setup, I found that I had to go into the net configuration assistant, and change my host name to the fully qualified name, example: my compuer name is computer1, I had to enter in computer1.OIT.Docfinity.com for it to take. That has always gotten me past that TNS error, just my 2 cents, hope it helps.
keep on keeping on.

The wait operation time out

Dear all,
I am facing one problem with my user pc "The wait operation time out"
ERROR=
Aconnection was successfully established with the server. but then an error occurred during the pre-loging handshake. (provided , SSL providing error-0 , The wait operation time out microsoft SQL server error- 258.
my user-pc use windows 7 and connect VPN by using "Sonic-wall" we connect successfully and get my remote server IP ping reply but when try to access remote server database that time I am getting this error
At the same time using same network and id can connect the server from vpn and access database from other
system.
please help me sort it out this issue.
thanks
sajal

Hi Sajal,
It is possible that remote machine(server) is up but please check whether database server is up or not.
Please contact database administrator to know the status of database. This will help you to know the cause.
If database is down you cannot connect it.

Ssh operation time out

In my office, I have a MacBook and a Mac Pro. I tried to ssh to the Mac Pro from the Macbook and got the "operation time out" error. I am able to ssh to a Linux box from my Macbook.
Anybody has encountered this? Thanks.

I solved the problem.
I should select "set access for specific services and applications" in Preferences/Security/Firewall.

When I click on Web mail I get "The connection has time out

When I click on "Web Mail" from Glossbrenner United Methodist Church web page, it won't log on to my email page. I keep getting - The connection has time out
The server at 74.220.207.173 is taking too long to respond.
The site could be temporarily unavailable or too busy....
If you are unable to load any pages, check you computers' network connection.
If your computer or network is protected by a firewall.....

These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Ifou don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway.

IIS Manager 6.0 Wait Operation Time Out on connecting to remote server

I'm looking to configure SMTP on Server 2012 Core, I've installed the feature and remote management/administration tools and web management console and web management compatability. When I attempt to connect via IIS 6.0 Manager I immediately receive "The
wait operation timed out"
I've removed and re-installed the SMTP-Server feature without success
any suggestions would be appreciated.

I encountred this issue the IIS 6.0 requires the SMTP if you want to configure the remote management of the Server Core then try to follow this youtube podcast
watch?v=Pim1T6z6DJM Configure a Win 7 machine to control
of this serie that shows how to install and configure a web server core from A to Z
http://www.youtube.com/playlist?list=PLzayUN5B2cXMoyziV4oUs94P6EZT6QVmc
watch?v=5z1NiWUJdGU Wipe generation
watch?v=Q3BoLkWWAC4 hard disk preparation
watch?v=lOPvy-cn0Uk server core installation
watch?v=gTnOUJfRkDg configure the web server
watch?v=0ofvknXMNsc install .net framework in the webserver
watch?v=K4ADBzZeM6E install the web server role
watch?v=oGHC0sbe17Y remote control the server
watch?v=SpzAsRkjV40 continue the remote configuration
watch?v=XjPD8U_y29I Create and alias for the web server
watch?v=Pim1T6z6DJM Configure a Win 7 machine to control
Enjoy the vids
The complexity resides in the simplicity Follow me at: http://smartssolutions.blogspot.com

Sockets - BufferedReader.read() operation time-out

Hi all,
I'm facing some problems to receive data over socket connection from a PC. I send data via BufferedWriter, but I have time-out error (IOException: Operation timed-out) and I can't see why it happens.
Here is part of my code:
StringBuffer strBuffer = new StringBuffer();
          int charRead;
          File xmlFile = null;
          FileWriter fw = null;
          try{
               if(s != null){
                    bufReader = new BufferedReader(new InputStreamReader(s.getInputStream()));
               xmlFile = new File(fileName);
               if(xmlFile.exists())
                    xmlFile.delete();
                    xmlFile.createNewFile();
                    fw = new FileWriter(xmlFile);
               }else{
                    connect();
               //while((line = bufReader.readLine()) != null)
               while((charRead = bufReader.read()) > -1)
                    strBuffer.append((char)charRead );
               bufReader.close();
               String writeString = strBuffer.substring(4);
               if(fw == null){
                    setErroSocket(true);
                    setMsgErroSocket("I/O Error: Erro recebendo dados via Socket");
               fw.write(writeString);
               fw.flush();
          }catch(IOException ioE){
               setErroSocket(true);
               setMsgErroSocket("I/O Error: " + ioE.getMessage());
          return xmlFile;
If nore detailed information is need, please ask me.
Thanks for any help !

Hi,
I believe I found where was the problem. I was a bit confused with setSoTimeout(), because I thought it set the limit of time for read bytes, but in fact it controls the limit of time that conection is off. Looking a little deeper in my code I saw that bytes are read, but the exception occurs the same way.
I just need to change some things because I need a permanent client socket on-line because I'll need constantly comunication with a server application (Delphi) running on a PC. I believe that I must start with changing my ClientSocket class into a Thread.
Thanks for your help !

System I/O Operation Time-out

I am running iTunes 6.0.5 for Windows. When I try to sync to load about 200 songs on my iPod nano (1st generation)I get the error "The specified I/O operation on drive G: was not completed before the time-out period expired." If I am lucky I might get one or two songs downloaded to my iPod at a time. Any help that could be offered would be greatly appreciated.

I am running iTunes 6.0.5 for Windows. When I try to
sync to load about 200 songs on my iPod nano (1st
generation)I get the error "The specified I/O
operation on drive G: was not completed before the
time-out period expired." If I am lucky I might get
one or two songs downloaded to my iPod at a time.
Any help that could be offered would be greatly
appreciated.
Is the iPod Nano connected to a USB 2.0 port, or a USB 1.1 port?

Sporadic issues with wireless connection (dhcpcd times out)

I'm using a wireless usb adaptor Dlink DWA 110 (chipset rt73). It can connect fine some times, but many times it times out on dhcpcd. Raising the time out time causes it to hold indefinitely on the message "offered 192.168.0.132 from 192.168.0.1". Analyzing the dmesg, I see
[ 118.065433] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 507.792005] wlan0: deauthenticating from 00:1e:58:16:89:8c by local choice (reason=3)
[ 507.795984] wlan0: direct probe to AP 00:1e:58:16:89:8c (try 1)
[ 507.798617] wlan0: direct probe responded
[ 507.798622] wlan0: authenticate with AP 00:1e:58:16:89:8c (try 1)
[ 507.800482] wlan0: authenticated
[ 507.800506] wlan0: associate with AP 00:1e:58:16:89:8c (try 1)
[ 507.802986] wlan0: RX AssocResp from 00:1e:58:16:89:8c (capab=0x431 status=0 aid=6)
[ 507.802991] wlan0: associated
[ 507.816784] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
I'm writing this from an ubuntu live cd, where it works just fine. Here follows my rc.conf
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.UTF-8"
HARDWARECLOCK="UTC"
TIMEZONE="America/Bahia"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(!usblp !ipv6)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="pedro"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
#Static IP example
#eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
#eth0="dhcp"
#INTERFACES=(wlan0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
NETWORKS=(dlink)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng network net-profiles cups dbus hal netfs crond alsa webmin timidity++)
I've tried googling, but no suggestion seems to work. Any help?

This is basically a workaround, but still. You can try hold_connect script to automatically watch connection status. It can be found here: https://bbs.archlinux.org/viewtopic.php?id=103139. Just add "iwconfig wlan0 power off" string in function connect under "sudo netcfg down ..." line.

Just bought a second hand iPod Touch 32GB 4th Gen. The IOS is currently 4.3.5 and when I try to update to the latest, the connection continually times out. Can you help?

Hi All,
First ever post on here but I feel that my options are slowly running out. I've just bought a second hand iPod Touch 32GB 4th Gen. It was reset to factory settings meaning that that software was 4.3.5
As soon as I plug it into iTunes it asks me to update to the latest version. I click for it to go ahead but the connection times out (error code 3259)
I've been on the phone to apple for over an hour and we still couldn't resolve the issue. We tried disabling the firewall, uninstalling AVG, diabling pop up blockers, checking the LAN settings, disabling the router security and anything else we could think of.
We still couldn't get it to stop timing out. I tried to download the firmware from iClarified but iTunes said it didn't recognise the software.
Has anyone got any ideas?

You said:
We still couldn't get it to stop timing out. I tried to download the firmware from iClarified but iTunes said it didn't recognise the software.
Just what did yo do to gt iTunes to see the download:

Remotely connecting operation timed out error

i have three connections remotely done to a linux box RH 7.2 oracle 9.0.0.1 through telnet.
When i try to connect the fourth connection,it says operation timed out.
There is only one listener for all the clients.
Do i need to add more listeners to the database?
Thanks
.

No, Listener can serve as many as it can..there is no limit
where is the forth connection connected from?
Same machine or different from the frist 3 connections?
If different you have to look into the firewall the particular machine
Message was edited by:
Maran Viswarayar

IFS-21030 Database Operation time out

Hi everyone,
I really need help with this one. I try to search for a folder with a certain value for a custom attribute. It ALWAYS takes a very long time, but some times it returns successfully and sometimes it gives me a "Database Operation timed out" IFSException.
I tried to change the attribute setting to make it indexed, but it didn't help.
I'm using Oracle Files 9.0.2 (which, I think uses CM SDK 9.0.3, or at least this is the jar I'm using on the client side).
This doesn't happen with all folder queries, just the query where I use the
FolderRestrictQualification.setMultiLevel(true)
Can anyone help me with this?

setMultiLevel(true) enables folder recursion, of course, which can be an expensive operation, depending on how many levels deep you need to go.
how many subfolders (and documents) are we talking about here?
.rich

Operation time out

After successful deployment of my wcf service to staging or production I get the following message when I browse to the url:
<big>Network Error (tcp_error)</big>
A communication error occurred: "Operation timed out"
The Web Server may be down, too busy, or experiencing other problems preventing it from responding to requests. You may wish to try again at a later time.
There is nothing to tell me what the problem could be. The service is running. However, the endpoint status is "down"
If I create a new wcf service and deploy it then it works fine, which leads me to believe that there is something wrong with the config file. Any ideas?

some times this massage may be received because of the name resolution problem, so simply open your tnsnames.ora and listener.ora file and replace the HOST name with the IP address of the system where the oralce database has been installed. Thats it. Try it, good luck
ex: HOST = 192.1680.20 it my server IP address
check my tnsnames.ora and listener.ora files
# tnsnames.ora Network Configuration File: E:\oracle\product\10.2.0\db_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORACLE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.20)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = oracle)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
# listener.ora Network Configuration File: E:\oracle\product\10.2.0\db_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = ORACLE)
(SID_NAME = PLSExtProc)
(ORACLE_HOME = E:\oracle\product\10.2.0\db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.20)(PORT = 1521))
Edited by: 935918 on May 23, 2012 10:12 PM

Connection Process times out in Conntrans

Hi guys,
On the laptops when conntrans happens, we see an error as follows:
Connection process timed out. Contact system admin to change timeout value and synchronize again.
everything worked out well in Q, but not in Production.
are there any suggestions?
thanks

Hi,
Please update the field STR_VALUE of the table SMO5TSVVAL to FFFF.
This should make sure that it never times out.
Best Regards,
Shourav

Unable to download firefox, operation times out

Tried to download firefox with internet explorer, at 99% is says operation timed out
== This happened ==
Not sure how often
== downloaded firefox ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; .NET CLR 1.0.3705; Media Center PC 4.0; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; OfficeLiveConnector.1.4; OfficeLivePatch.1.3)

[[Installing Firefox on Mac]] is somewhat detailed on how to do the install.
The requirements [http://www.mozilla.com/en-US/firefox/5.0beta/system-requirements/ are]:
''Operating Systems''
*Mac OS X 10.5
*Mac OS X 10.6
''Recommended Hardware''
*Macintosh computer with an Intel x86 processor
*512 MB of RAM
*200 MB hard drive space
What is that doesn't work for you? Could you please give more details?
Thank you.

TNS - 12535 - Connection Operation Time Out

Similar Messages

Maybe you are looking for