SSIS 2005 Adding a Column to an existing Package

Hello Forum
forgive me but it 's been over 5 years since I touched SSIS.
We have an SSIS package that compiles data and then exports the data to a MS Ecxel Spreadsheet. We are struggling to add an existing column.
Essentially the package reads data from source, performs a "Data Conversion" so that the Output Columns are named "Output of Field1" etc and then the data is exported to the Excel Spreadsheet.
The developer has succeeded in adding the column to the Data conversion and has manually added the column in the Spreadsheet; however although the converted column appears in the Column Mappings, the corresponding destination Column in the Spreadsheet does
not.
Can someone please provide instructions on how we can achieve this? Many thanks.
Please click "Mark As Answer" if my post helped. Tony C.

You have to re-configure whole data-flow task inside your package, where ever your new column effected in package.
Thanks
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Similar Messages

Adding one function to a existing package

i want to add one function to an existing packgage .
How can i do this?

Hi,
        Its Simple , Take Your Existing Package Spec And Body from Your Database,It Will Like Below Shown Code,
Package Spec:
Create or Replace Package my_existingpack
is
Procedure myproce_1 (lv_variable in varchar2
                                    lv_variablex out varchar2);
procedure myproce_2(lv_variable in varchar2
                                    lv_variablex out varchar2);
end my_existingpack;
Package Body :
Create or Replace Package Body my_existingpack
is
Procedure myproce_1 (lv_variable in varchar2
                                    lv_variablex out varchar2)
   is
   Begin
--Some Code Will be Here.
end myproce_1;
procedure myproce_2(lv_variable in varchar2
                                    lv_variablex out varchar2)
is
Begin
--Here Some Code inside....
end myproce_2;
end my_existingpack;
Now You Are Going to Add /Patch A New Funtion In Existing Package:
Package Spec:
Create or Replace Package my_existingpack
is
Procedure myproce_1 (lv_variable in varchar2
                                    lv_variablex out varchar2);
procedure myproce_2(lv_variable in varchar2
                                    lv_variablex out varchar2);
Funtion MypatchFun (lv_variable in varchar2
                               lv_variable2 in varchar2)
Return Varchar2;
end my_existingpack;
Package Body :
Create or Replace Package Body my_existingpack
is
Procedure myproce_1 (lv_variable in varchar2
                                    lv_variablex out varchar2)
   is
   Begin
--Some Code Will be Here.
end myproce_1;
procedure myproce_2(lv_variable in varchar2
                                    lv_variablex out varchar2)
is
Begin
--Here Some Code inside....
end myproce_2;
Funtion MypatchFun (lv_variable in varchar2
                               lv_variable2 in varchar2)
Return Varchar2
IS
Begin
--Here Your Code...
End;
end my_existingpack;
Now Compile Both Package Spec And Body.

Adding new column in an existing report which was build using Union

While working in OBIEE 11g I encounter an issue.
My existing report was build using UNION at Criteria Tab in Analysis. Now I have a requirement to add a new column into the same report. For each criteria I have added the new column but when I go back to the "Result Columns". I see a new field added but it is not allowing me to open or edit column properties for that new column & at the same time it is not allowing me to navigate to other tabs like Results, Promts, and Advanced.
I don’t want to build this report from scratch. Is there any workaround to get it resolved?

Hi,
Just check it once the new added column data types are mismatched or not?
and the new added column should be navigated into excluded section, so u should edit the report and dragged into the table column section.
Thanks..

Found errors in existing report after added a column in an existing table

Hi,
I have a Table called "EMP" and a interactive report "EMP_Details".
EMP table has data and it shows in the report.
EMP_Details report has two buttons. - 1.Create - it is used while inserting a new record into the table for a new joinee
2. Get_Info - it is used in case you want to know about an employee(there is a drop down to select the name os a employee) in details.
Till now the report was working fine.
Now What I did...
1. I did some edit in the values in the EMP table.
2. I added a new column in the Table and put some value in each row. Now the table was changed and the new values and column was reflected in the table.
3. so accordingly, I added the new column in the "Process" used for inserting a new record into the table and i selected the new column from the "Select column list" for showing it in the report.
Now what happened to report
1. I am getting the report for the old employees but what i made changes in the table.. it has not been reflected in the report.
2. The new column is shown in the report but the values I have put in the table have not shown in the report.
3. While inserting the data for a new joinee, the value can not be inserted into the table at all.
Appreciate, If anyone understands my issues and give any solution.
Thanks in advance.
Kuldip

Kuldip:
Sounds like you may have forgotten to 'Commit' your changes to the database . Go to the session where you edited the values of the EMP table and execute a 'commit'.
varad

SSIS Package Downgrade from SSIS 2012 to SSIS 2005

Hi,
I have developed several SSIS packages using 2012 version.
Is there any way that I can use the same packages in SSIS 2005
version ? Actually, while opening in SSIS 2005 version it is giving error , that packages developed in newer version and can not be opened in lower version.
Any work around also for this available ?
Thanks

As alternative, you will have to write the package from the scratch.
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Adding a new column to an existing database table

How can I add a new column to an existing table (ex. dcs_product) and can anyone tell me the required configuration changes i may need to make.
Thanks in advance!

create/customize /atg/commerce/catalog/ProductCatalog.xml:
<gsa-template>
<item-descriptor name="product" xml-combine="append">
<table name="my_dcs_product" type="auxilary" id-column-name="product_id">
<property category-resource="categoryInfo" name="myDescription" column-name="myDescription" data-type="string"/>
</table>
</item-descriptor>
</gsa-template>
Hope it helps.
-RMishra

Adding a column into existing index

Can I add a column into existing index?
or do I need to drop the index and recreate one?
Thanks.

but there is no way to add a column to an existing table10:43:24 TEST.SQL>create table test10:43:28 2 (
10:43:29 3 a number
10:43:32 4 )
10:43:34 5 tablespace tools
10:43:36 6 ;
Table created.
Elapsed: 00:00:00.06
10:43:38 TEST.SQL>alter table test add
10:43:44 2 b date;
Table altered.
Elapsed: 00:00:00.68
10:43:48 TEST.SQL>desc test
Name Null? Type
A NUMBER
B DATE
10:43:51 TEST.SQL>drop table test;
Table dropped.Indeed there is.Yoann.

Lookup transformation to avoid duplicate rows? - SSIS 2005

Hi,
I'm maintaning a SSIS 2005 pkg. I need to read a flat file to write on a SQL Server table, avoiding duplicates.
I can have duplicates rows into the flat file to import and I need to prevent the insert of any rows already existing in the SQL Server table.
So, I think to use a lookup transformation. I've created a flat file source, then I connect it to a lookup transformation and inside it I've specified as the reference table the SQL Server destination table. Then, I've checked the available lookup columns
each adding as a new column: but the lookup task has arised an error and so I've specified as lookup operation the replacement. For each unmatching I need to write on the SQL Server table (the reference table in the lookup). For the lookup output error I've
indicate to ignore failure. Other steps?
However, when I run the pkg then inside the SQL Server destination table I can see only NULL values, but I want to see the rows don't already present in the table.
Any suggests to me, please? Thanks

Hi,
I'm using SSIS 2005 as reported in the title of the post.
I could have duplicates inside the source file and the existing table could haven't any rows.
Thanks
If you dont have any rows in existing table, then they will go through Error output in lookup task. For duplicates, lookup task will find matches and will go through lookup match output
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Impact of new column addition to existing database

Hi,
I have a business reqt where in the existing table, I have to add a new column. Yet it is not finalised whether the column is going to be nullalble or NOT NULL.
But I would need a help to judge where all the addition of new column in the existing Db can cause a impact.
I know few things but need to know the complete picture:
1. dependent SP's would get invalidated ( specially with INSERT statement)
2.
3...
..and all those.
Please help.
Regards,
Aashish S.

As Satish pointed out the locking issue - I once saw someone lock up a whole application for hours because they added a new column with a default value on a large table because that took a DDL level lock on the table.
Also, if people have coded their inserts properly (using column names and values) then you should not have any problems with the order of column names even though the column is added to the end, unless you use DBMS_REDEFINITION.

SSIS 2005 not running after upgrading (32 bit, Windows XP to 64 bit Windows 7)

I really need some help. Recently I went from using Visual Studio and SQL 2005 on a laptop (32bit system - Windows XP) to a desktop unit 64bit processor with Windows 7). SSIS on the laptop worked just fine and I could execute and open packages in SSIS; however,
my new desktop unit will not even allow me to open a new package or run an existing package. As soon as I attempt to create a new SSIS project, I receive the following error: "An error prevented the view from loading. The specified module could not be
found. (Exception from HResult:0x8007007E)(System Windows Forms).
SSIS won't allow me to view the control flow or data flow screens and if I attempt to run an existing package created with the SSIS wizard I receive the following error: SSIS package "Package1.dtsx" starting.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Error: 0xC0202009 at Package1, Connection manager "SourceConnectionExcel": SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040154.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class not registered".
Error: 0xC020801C at Data Flow Task, Source - Without_Sample$ [1]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "SourceConnectionExcel" failed with error code
0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Error: 0xC0047017 at Data Flow Task, DTS.Pipeline: component "Source - Without_Sample$" (1) failed validation and returned error code 0xC020801C.
Error: 0xC004700C at Data Flow Task, DTS.Pipeline: One or more component failed validation.
Error: 0xC0024107 at Data Flow Task: There were errors during task validation.
SSIS package "Package1.dtsx" finished: Failure.
I have tried changing the properties in the package to run in 32-bit mode; however, this does not work. I can run queries and import data in SQL Server Management Studios just fine, as well as run queries and reports in Visual Studios; however, I can't execute
or create any package in Visual Studio with the new machine. Am I missing a needed system file in the new sysWOW64 folder? The IT person who installed the software isn't familiar with the program and doesn't know how to fix it either. I'm relatively new with
using SSIS and really need some help on how to get this fixed. Any help you can offer would be greatly appreciated.

If the Development Studio environment does not even open then it is probably an installation issue. Possibly a DLL did not register properly. Could you take a look at the following forums where a similar issue is being discussed? You can also look for more
responses by searching for "0x8007007e visual studio on windows 7" in your search engine.
http://support.microsoft.com/kb/978714
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/0bcf22d6-adab-4595-b0d8-3a37ce7fbff3/2008-ssis-designer-stops-working-after-installing-vs11-dev-preview?forum=sqlintegrationservices
http://stackoverflow.com/questions/10460118/the-specified-module-could-not-be-found-exception-from-hresult-0x8007007e
- Aalamjeet Rangi | (Blog)

How to add an unique column to an existing table?

How to add an unique column to an existing table?
I have a large table which has no unique constraint. and I want to add an unique column for it. How to do it?
Does adding a sequence is a good choice? How to do it?
Thank you

Hi,
alter table tablename
add constraint contraint_name unique (columnname);but before that you need to check in the table.column there is no duplicate record exist.
Does adding a sequence is a good choice?
Your talking about unique constraint then yes.
Regards,
Taj

Running SSIS 2005 in SQL Server Job Agent 2012

Hi Guys,
I'm trying to create a job in SQL 2012 that calls an SSIS 2005 package, however i'm getting some issue. I researched the issue a bit and got this link . The given link suggested to use dtexec as SQL 2012 try to convert it in the memory.
I used the dtexec but I'm still getting an issue.
"Executed as user: NT Service\SQLSERVERAGENT. Microsoft (R) SQL Server Execute Package Utility Version 9.00.1399.06 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 4:11:19 PM Error:
2015-04-13 16:11:26.24 Code: 0xC0012024 Source: OTH Market Exist? Description: The task "OTH Market Exist?" cannot run on this edition of Integration Services. It requires a higher level edition. End
Error Error: 2015-04-13 16:11:26.24 Code: 0xC0012024 Source: Arcticle CSV Exist? Description: The task "Arcticle CSV Exist?"
cannot run on this edition of Integration Services. It requires a higher level edition. End Error Error: 2015-04-13 16:11:26.24 Code: 0xC0012024 Source: BV Market Exist? Description:
The task "BV Market Exist?" cannot run on this edition of Integration Services. It requires a higher level edition. End Error Error: 2015-04-13 16:11:26.51 Code: 0xC002F210 Source: No Input
Files Email Execute SQL Task Description: Executing the query "DECLARE @result int; EXEC @result = security.dbo.spSendEmail
@Subject='[GFK Import & Export] - All Input Files Are Missing',
@Message ='Processing has been stopped due to missing input files',
@ToID =25, @ccID =0,
@Attachment =''" failed with the following error: "Database 'security' does not exist. Make sure that the name is entered correctly.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly,
It seems that I do need to upgrade my packages to run in SQL 2012 unless if there's another way without upgrading it that would be great.
I just want to get the confirmation if possible or not
Many thanks guys.

Hi Vaibhav,
I created 2 jobs. the first job calls a simple package that execute a single SQL. It ran
successfully when I execute the said job using this command
DTEXEC /FILE "\"C:\TFS\WDSHE SSIS Packages from DTS\GFK_Test_package.dtsx\"" /DECRYPT stud10 /CHECKPOINTING OFF /REPORTING E
2nd Job, calls a complex package which contains several execute process tasks. this job fails with the error mentioned at the top.
Now, I modified the simple package in the first job and add an Execute Process Task.
I'm started to get an issue
Message
Executed as user: NT Service\SQLSERVERAGENT. Microsoft (R) SQL Server Execute Package Utility Version 9.00.1399.06 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 4:51:57 PM Error: 2015-04-13
16:52:01.32 Code: 0xC0012024 Source: Unzip BV ZIP Description: The task "Unzip BV ZIP" cannot run on this edition of Integration Services. It requires a higher level edition. End Error DTExec:
The package execution returned DTSER_FAILURE (1). Started: 4:51:57 PM Finished: 4:52:01 PM Elapsed: 4.212 seconds. Process Exit Code 1. The step failed.
Have you had a similar issues before?
I will try to install the SSIS service and see how I go. thanks for the link

Adding new column to production database

I have to add a new timestamp column, that defaults to the current date/time, to an existing production database. The table is large - 150M records. I am trying to understand the ramifications of adding a new column to a table this large that gets hit often, mostly with inserts and reads. The column does allow null values and I am not going back and populating existing records with a value. Basically, I am looking for some best practice guidelines - how to prepare, what to expect, what other processes should be followed along with this schema update.

Radiators wrote:
Thanks, I have not found any %TYPE or %ROWTYPE dependencies on the table I am altering. But at the same time I do not understand how these types of dependencies would invalidate packages. I wouldn't be breaking any %TYPE dependency because I am not dropping columns, only adding a new one. And according to documentation for %ROWTYPE - "If columns are later added to or dropped from the table, your code can keep working without changes." Can you point me to Oracle documentation that describes your concern in detail? Thanks.you can test it yourself
SQL> CREATE TABLE abc (c1 NUMBER);
Table created.
SQL> INSERT INTO abc
2       VALUES (99);
1 row created.
SQL> CREATE OR REPLACE PROCEDURE test_proc
2 AS
3     v   abc%ROWTYPE;
4 BEGIN
5     SELECT c1
6       INTO v
7       FROM abc
8       WHERE ROWNUM = 1;
9 END;
10 /
Procedure created.
SQL> SELECT object_name, status
2    FROM user_objects
3   WHERE object_name = 'TEST_PROC';
OBJECT_NAME                STATUS
TEST_PROC                    VALID
SQL> ALTER TABLE abc ADD (c2 VARCHAR2(10));
Table altered.
SQL> SELECT object_name, status
2    FROM user_objects
3   WHERE object_name = 'TEST_PROC';
OBJECT_NAME                 STATUS
TEST_PROC                     INVALID
SQL> you should also consider the chance that some where if people are using "select * into" using this table, which will fail since you added new column. i don't see any unusual performance bottlenecks by adding a new column. in case of the backups, yes the earlier backups will not have the column. if you restore it, you will see earlier table structure itself. i have one specific question. why are you not attempting this in development/test environment first? even if it is a simple insert, it's always important to do it in test environments before attempting on production db. one thing for sure i know is, after adding column, you will have to recompile all the invalid dependencies. i think, it's better if you attempt it in test db and come up with any issues you see rather than asking a general question where problematic scenarios are plenty and rarely unknown before hand.

Adding custom column to a Data Table (bound to database table)

Hello,
I've added an additional "Output Text" column to an existing "Data Table" component, which is pulling a database table and rendering it. It's actually called "OutputText5". What I want to do, is set the value of the "OutputText5" dynamically, depending on a Date comparison between the system date, and one of the currentRow field values, which is actually an Oracle Date data type. basically I'm trying to use the Date.after() comparison and put different content in there depending on true or false evaluation.
Seems simple enough .. but.. I'm trying to do this without using vim and JSP Beans (how I'd usually do this). I'm not experienced with JSF components and how this would be done using JSC - can I iterate over currentRow or something inside the "Page1.java" source? Is there an easy way to create dynamic value bindings like this in Data Table components in general? Maybe using expressions in "OutputText5" properties or something? I figure I should ask about doing this the easy way, before I spend lots of time and start teaching myself bad habbits.
I apologise in advance if this is a repeat post. I spent some time searching ,but came up empty handed.
Thanks in advance.
David Basham

Hi David,
Here's some ideas to try on:
http://swforum.sun.com/jive/thread.jspa?forumID=123&threadID=49459
hth,
v

Add columns in the existing Customer table in a Subject Area

Hi All,
Well I need to add two columns from Sales table(new table i created which has customer Id) and join it to the Customer Table which has the Customer Id and several columns. The Customer table was already in the RPD which has all the customer information. Now that i have this new requirement to add few columns from the Sales table to the Customer table in one Subject Area.
What i have done so far is that I imported the sales table into the rpd, made a join in PHYSICAL LAYER on the customer ID of the Sales table to the Customer id of the Customer table and simply dragged the sales table to the Customer LTS in the BMM layer(NO MORE JOINS IN BMM)and dragged and dropped the same into the Presentation layer. The customer table is linked to one fact table in that subject area. So i thought that dragging the sales table columns in the customer table LTS will work because customer is linked to one fact in that subject area.
Now, In the Answers when I dragged columns from customer & sales table I see only one record that is the first customer_id record from my Sales table but i know there are many common customer_ids between those two tables but its only picking the first customer id from the sales table.
Any help will be appreciated..
Normally if we need to add some columns to the existing tables in one subject area what is the best approach??

Hi Balajee,
SAPMM06E 0111 CUSTSCR1 SAPLXM06 0111 Subscreen: PO item
for more information check with these links
ADDING NEW FIELDS IN me21n
ADDING NEW FIELDS IN me21n - (Screen exit / enhancment)
hope this will useful to you.
Regards!

SSIS 2005 Adding a Column to an existing Package

Similar Messages

Maybe you are looking for