SSIS error working with Server 2012

Hi,
I have a class library that creates, delete, update ssis packages programatically.
What could be the reason for an error message that I get in front of the server 2012. Against a server 2008 It works good.
Unable to cast COM object of type 'System.__ComObject' to interface type 'Microsoft.SqlServer.Dts.Runtime.Wrapper.IDTSExecutables100'. This operation failed because the QueryInterface call on the COM component
for the interface with IID '{0FAC005E-5ABD-4D1E-9B21-18F3DE622B24}' failed due to the following error: No such interface supported (Exception from HRESULT: 0x80004002 (E_NOINTERFACE)).
thanks

It looks like your references need to be updated for 2012.
David
David http://blogs.msdn.com/b/dbrowne/

Similar Messages

  • Sleep and hibernation is working on Server 2012 with started hypervisor! I do not know why...

    Hi,
    I enabled Hyper-V role in the Microsoft Windows Server 2012 on testing computer (PC with i7 CPU and 16GB RAM). I found very strange behavior. The sleep mode was enabled and after command “powercfg /hibernation on” the hibernation is also working.
    I tested sleep (S3) and hibernation with started hypervisor and with running virtual machine. I tested sleep and hibernation triggered by power button and even with time-out that was set in the Power Options (I set sleep after 1 minute and
    later hibernate after 1 minute and wait).
    Sleep and hibernation is working! I do not understand why. Sleep and hibernation should be functional only on Client Hyper-V on Windows 8 and not on the Server 2012.
    Some examples:
    Testing workstation (i7, 16GB RAM) with Server 2012 and with started hypervisor:
    C:\Users\Administrator>powercfg /a
    The following sleep states are available on this system:
        Standby (S3)
        Hibernate
        Fast Startup
    The following sleep states are not available on this system:
        Standby (S1)
            The system firmware does not support this standby state.
        Standby (S2)
            The system firmware does not support this standby state.
        Standby (Connected)
            The hypervisor does not support this standby state.
            The system firmware does not support this standby state.
        Hybrid Sleep
            The hypervisor does not support this standby state.
    My laptop (i5, 8GB RAM) with Server 2012 and with started hypervisor:
    >powercfg /a
    The following sleep states are not available on this system:
        Standby (S1)
            The system firmware does not support this standby state.
            An internal system component has disabled this standby state.
                    Hypervisor
        Standby (S2)
            The system firmware does not support this standby state.
            An internal system component has disabled this standby state.
                    Hypervisor
        Standby (S3)
            An internal system component has disabled this standby state.
                    Hypervisor
        Hibernate
            An internal system component has disabled hibernation.
                    Hypervisor
        Standby (Connected)
            The hypervisor does not support this standby state.
            The system firmware does not support this standby state.
        Hybrid Sleep
            Standby (S3) is not available.
            Hibernation is not available.
            The hypervisor does not support this standby state.
        Fast Startup
            Hibernation is not available.
    R. Revil
    Relef Revil

    Hi Ben,
    I have nearly exactly the same Problem as Relef Revil.
    I have Lenovo T510 Notebook with Core I7 and a Lenovo T420 Notebook with a CoreI5.
    On my T510 S3 Sleep works perfectly with Hyper-V Role. On my T420 Sleep is disabled due to Hypervisor.
    If I uninstall Hyper-V Role then Sleep works again as expected.
    So, from a Little simple perspective, I Looks like this is a Hyper-V Thing or Problem.
    I have als updated to the latest BIOS and latest Intel HD Graphics 3000 Drivers on this Win 2012R2 Maschine.
    Also I have installed all possbile latest Versions of all other devices.
    Could you probably give me an idea where to search for a solution.
    So, what is the logic why Hyper-V disables sleep, when Sleep worked before?
    I assumed that Hyper-V and Sleep ist generally possible on Win2012R2, especially when Sleep works perfectly when Hyper-V Role is not installed.
    Kind Regards
    Marcus
    C:\Users\Marcus.Koenig>powercfg /a
    The following sleep states are not available on this system:
    Standby (S1)
    The system firmware does not support this standby state.
    An internal system component has disabled this standby state.
    Hypervisor
    Standby (S2)
    The system firmware does not support this standby state.
    An internal system component has disabled this standby state.
    Hypervisor
    Standby (S3)
    An internal system component has disabled this standby state.
    Hypervisor
    Hibernate
    An internal system component has disabled hibernation.
    Hypervisor
    Standby (Connected)
    The hypervisor does not support this standby state.
    The system firmware does not support this standby state.
    Hybrid Sleep
    Standby (S3) is not available.
    Hibernation is not available.
    The hypervisor does not support this standby state.
    Fast Startup
    Hibernation is not available.
    C:\Users\Marcus.Koenig>

  • ADUC MMC error in Windows Server 2012

    That is not true at all. It works just fine with server 2012. There are some things like IE settings for 10 that do not show up unless you are running WIndows 8

    Full error message:
    MMC cannot open the file C:\Windows\System32\dsa.msc
    This may be because the file does not exist, is not an MMC console, or wascreated by a later version of MMC. This may also be because you do not havesufficient rights to the file.
    I have been encountering this error on our 2012 DC for the past two weeks orso. All Administrative accounts are affected by this error. No one can run theADUC MMC. (we have another DC we're doing our work from)
    If I create a new MMC and add the snap in - it works. I just cannot open thebuilt in ADUC console. (sites and services and domains and trusts both workfine btw) I have spent several hours trying fixes I have managed to findthrough google, all to no avail. Has anyone encountered this error and actuallybeen able to fix it?
    tried SFC, replacing the dsa.msc from another server, checked...
    This topic first appeared in the Spiceworks Community

  • How can I Create a Client Configuration File for RemoteApp and Desktop Connection with Server 2012?

    I have a working RDS RemoteApp site and looking to test out the feature in Windows 7 Control Panel\All Control Panel Items\RemoteApp and Desktop Connections
    I came across this link: Create a Client Configuration File for RemoteApp and Desktop Connection and I believe this is what I need to do first, but these instructions are for
    Server 2008, and I'm running 2012.
    Any suggestions or tips on how I can begin testing this with Server 2012?

    Hi,
    You can manually enter the path to the 2012 feed and it will connect and download the RemoteApps and Desktop connections.
    If you need a sample .wcx file I have posted one here a couple of times.  If you want I will look for it and post a link.
    -TP
    I tried adding my URL's below, these are sample links that work for me right now for when I log into the web page, but neither of these work.  And I'm not sure what I would need to do with or how to create a .wcx file.
    When I type in my URL of: https://connect.mydomain.org/RDWeb, I get redirected to: 
    https://connect.mydomain.org/RDWeb/Pages/en-US/login.aspx?ReturnUrl=/RDWeb/Pages/en-US/Default.aspx

  • Java.lang.InstantiationException: Error communicating with server:

    Hello everybody, I am an easy Helloworld application, the deploy is fine, but when I execute the client it appears the next error:
    java.lang.InstantiationException: Error communicating with server: Lookup error:
    java.net.ConnectException: Connection refused: connect; nested exception is:
    java.net.ConnectException: Connection refused: connect; nested exception
    is:
    javax.naming.NamingException: Lookup error: java.net.ConnectException: C
    onnection refused: connect; nested exception is:
    java.net.ConnectException: Connection refused: connect
    at com.evermind.server.ApplicationClientContext.createContext(Applicatio
    nClientContext.java:300)
    at com.evermind.server.ApplicationClientInitialContextFactory.getInitial
    Context(ApplicationClientInitialContextFactory.java:190)
    at javax.naming.spi.NamingManager.getInitialContext(Unknown Source)
    at javax.naming.InitialContext.getDefaultInitCtx(Unknown Source)
    at javax.naming.InitialContext.init(Unknown Source)
    at javax.naming.InitialContext.<init>(Unknown Source)
    at hello.HelloClient.main(HelloClient.java:33)
    NamingException: Error reading application-client descriptor: Error communicatin
    g with server: Lookup error: java.net.ConnectException: Connection refused: conn
    ect; nested exception is:
    java.net.ConnectException: Connection refused: connect; nested exception
    is:
    javax.naming.NamingException: Lookup error: java.net.ConnectException: C
    onnection refused: connect; nested exception is:
    java.net.ConnectException: Connection refused: connect
    This is my application client:
    // HelloClient.java
    package hello;
    import javax.ejb.*;
    import javax.naming.*;
    import javax.rmi.PortableRemoteObject;
    import java.io.*;
    import java.util.*;
    import java.rmi.RemoteException;
    * A simple client for accessing an EJB.
    public class HelloClient
    public static void main(String[] args)
    System.out.println("client started...");
    try {
    // Initial context properties are set in the jndi.properties file
         Hashtable env = new Hashtable();
         env.put(Context.INITIAL_CONTEXT_FACTORY,"com.evermind.server.ApplicationClientInitialContextFactory");
         env.put(Context.PROVIDER_URL, "ormi://ecd11107.eadscasa.casa.corp:23791/helloworld");
         env.put(Context.SECURITY_PRINCIPAL, "admin");
         env.put(Context.SECURITY_CREDENTIALS, "123");
         Context context = new InitialContext(env);
    // This for use with com.evermind.server.rmi.RMIInitialContextFactory
    //Object homeObject = context.lookup("HelloBean");
    // This is for use with com.evermind.server.ApplicationClientInitialContextFactory
    Object homeObject = context.lookup("java:comp/env/Helloworld");
    // Narrow the reference to HelloHome.
    HelloHome home =
         (HelloHome) PortableRemoteObject.narrow(homeObject, HelloHome.class);
         System.out.println("hello home");
    // Create remote object and narrow the reference to Hello.
    Hello remote =
         (Hello) PortableRemoteObject.narrow(home.create(), Hello.class);
    System.out.println(remote.sayHello("James Earl"));
    } catch(NamingException e) {
    System.err.println("NamingException: " + e.getMessage());
    } catch(RemoteException e) {
    System.err.println("RemoteException: " + e.getMessage());
    } catch(CreateException e) {
    System.err.println("FinderException: " + e.getMessage());
    Can somebody helps me ???

    Thank you, but don�t work well yet. I checked the files orion-application.xml & principals.xml in the directory C:\servOracle\oracle\j2ee\home\application-deployments\helloworld but the result is the same, when I run the client the next error appears:
    NamingException: Lookup error: javax.naming.NoPermissionException: Not allowed to look up HelloBean, check the namespace-access tag setting in orion-application.xml for details; nested exception is:
    javax.naming.NoPermissionException: Not allowed to look up HelloBean, check the namespace-access tag setting in orion-application.xml for details
    This is my orion-application.xml
    <?xml version="1.0"?>
    <!DOCTYPE orion-application PUBLIC "-//ORACLE//DTD OC4J Application runtime 9.04//EN" "http://xmlns.oracle.com/ias/dtds/orion-application-9_04.dtd">
    <orion-application deployment-version="9.0.4.0.0" default-data-source="jdbc/OracleDS" treat-zero-as-null="true">
         <ejb-module remote="false" path="helloworld-ejb.jar" />
         <web-module id="helloworld-web" path="helloworld-web.war" />
         <client-module path="helloworld-client" deployment-time="fce4439997" auto-start="false" />
         <persistence path="persistence" />
         <principals path="principals.xml" />
         <jazn provider="XML" location="jazn-data.xml" />
         <log>
              <file path="application.log" />
         </log>
         <namespace-access>
              <read-access>
                   <namespace-resource root="">
                        <security-role-mapping name="<jndi-user-role>">
                             <group name="users" />
                        </security-role-mapping>
                   </namespace-resource>
              </read-access>
              <write-access>
                   <namespace-resource root="">
                        <security-role-mapping name="<jndi-user-role>">
                             <group name="users" />
                        </security-role-mapping>
                   </namespace-resource>
              </write-access>
         </namespace-access>
    </orion-application>
    And this is my principals.xml
    <?xml version="1.0"?>
    <!DOCTYPE principals PUBLIC "//ORACLE//DTD OC4J Principals 9.04//EN" "http://xmlns.oracle.com/ias/dtds/principals-9_04.dtd">
    <principals>
         <groups>
              <group name="users">
                   <description>users</description>
                   <permission name="rmi:login" />
              </group>
              <group name="guests">
                   <description>guests</description>
              </group>
              <group name="administrators">
                   <description>administrators</description>
                   <permission name="administration" />
              </group>
         </groups>
         <user username="admin" password="ADMIN">
              <description>The default administrator</description>
              <group-membership group="administrators" />
              <group-membership group="guests" />
              <group-membership group="users" />
         </user>
         <user username="SCOTT" password="TIGER">
              <description>no description</description>
              <group-membership group="users" />
              <group-membership group="administrators" />
         </user>
    </principals>
    Thanks in advance, please help me....

  • Adobe Flash v11.3.370.178 not properly working in Server 2012 RP?

    Has anyone gotten the bundled Flash to work in Server 2012?  Even if I completely disable all security within IE x86/x64/RT, the best I see is a blank interface for Flash that is the correct
    size of what I'm trying to load, but no content displays and no flash interfaces show up.  Right clicking does bring up the Flash context menu.  If from there I go to About Adobe Flash Player, the version info will only show up on Adobe's site right
    as I close the tab, and it’s much larger than it should be for the half a second it shows up.
    This is broken in the released VHD and ISO so far as I can tell.

    I always control the majority of IE settings via Group Policy and normally set the zone to medium-high.  I
    never launch or elevate any browser with a user who’s a member of the Administrators group unless diagnosing an issue, and even then I normally do it within a snapshot. I don't even
    run browsers as my normal limited user, I always de-elevate them to a different user who can't masquerade as my normal authentication.
    I've had Flash x64 working in 2008 R2 since October, and x86 since 2003 Server. Never had a real problem with it on an RTM version of Windows, but heh, betas!
    I'm not sure what you mean by Windows controlling Internet Security.  There are some settings that other browsers will respect from Internet Settings, but not many, and the firewall works
    as a firewall should, can you clarify?
    Devin Lanei
    If security, privacy or contents settings in "Control Panel\All Control Panel Items\Internet Options" are more restrictive than the Firewall, the Internet Options will govern.  Specifically, when it comes to scripts, executables or anything
    else from the internet that Windows thinks could change the system when it is opened, Windows will not let it be opened.  I don't really know this for a fact, it is just my opinion, but I've seen enough indications.  And UAC just makes it worse.
    You are right that this is best done with Group Policy, especially on production systems.  The only reason you would do what I described is that it is an isolated test system and you are trying to get clues as to what policies you could try
    setting to get it working the way you want (on the test system, of course).
    I have my USB flash setup the way I want it and I will test it tomorrow.  It seems I never do anything the easy way, I had to make it elaborate.  I have set up so that it should be able to boot both efi and mbr, and will offer a menu of four OS setup
    entries and a Recovery Console entry.  I've got Windows7, Windows 8, Server 2008R2, and Server 2012, all x64.  I've been using bcdedit for most of the last five or six hours.

  • PhpMyAdmin working with Server.app?

    Has anyone had any success enabling mcrypt in PHP5.3.15 so that phpMyAdmin works while Server.app is running?
    I've able to get it working under Snow Leopard, Lion and Mountain Lion but not while Server.app is running on by Mac Mini (late 2012) under 10.8.3.
    I'm still under the 90-day telephone support, but Apple says this issue isn't covered. (Boo!) But for a mere $695 they can help me out with the problem that is related to a symbolic link (or lack thereof).
    Has anyone gotten phpMyAdmin to work with Server.app?
    Thanks in advance.

    The solution:
    Copy mcrypt.so from
    /User/server/mcrypt/php5.3.15/ext/mcrypt/.libs/mcrypt.so
    to
    /usr/lib/php/extensions/no-debug-non-zts-20090626/mcrypt.so
    Saved $695!

  • TREX error 5500: NameServer error: communication with server failed

    Hello TREX Gurus,
    After applying the latest NW 7.0 SPS18, TREX is no longer working.  We are getting this error message in the TREX Administration.
    "5500: NameServer error: communication with server failed;connection refused,location=sap01:37001"
    Any helps is greatly appreciated,
    Dave

    we have same problem... did you find a solution?
    best regards

  • Error Communicating with server

    I've completed 4 projects and all went perfect without a hitch.  On starting a new project, I created 3 new bins, audio, stills, video.  When I clicked on capture, I get "error communicating with server. If this continues, contact adobe tech support."  I can't figure out why I'm getting this message now.  I haven't changed settings, using the same HD camcorder, etc.
    Any suggestions?

    Fast response ~ thanks.  I'm using the same camcorder I used on all previous projects: SonyHandycam, so I know it's not the camcorder  I've had no problem capturing in the past.
    The project settings: General>Action Safe & Title Areas are default settings; 20 and 10:  Video display format: Timecode:  Audio display format: audio samples:  Capture Format: DV. In the Sequence settings, they have to be factory default cause I've never changed any setting there.
    Actually I'm really stumped cause I just finished my Grandson's graduation video on July 10 and Premier and Encore worked beautifully.  Now, trying to do a family reunion video, I started new project, didn't change any settings, and when I clicked on Capture, it said "Capture Device Offline".  I went back and replugged in the camcorder, and still nothing.  Closed program, thought about it for awhile, then when I reopen, I get the "error communicating" in the resource panel.
    I doubt this will help you but I'm hoping......

  • Lightroom 3 Error Working With Photos That Work With Other Apps

    My Setup:
    Lightroom 3.3 for Mac
    iMac OS X 10.6.6
    The problem:
    Lightroom is unable to work with photos it used to be able to work with. In the Library Module I get the error message "There was an error working with the photo." In the Develop Module I get the message "The file appears to be unsupported or damaged."
    Now I know the photos are ok because I can view them in other apps including Photoshop CS5
    And these photos used to work in Lightroom.
    I am suspicious it has something to do with Picasa, which I use to catalog faces. I have compared the exif data and the photos that don't work have an extra value called "Image Unique Id" and it appears to be a long hexadecimal number.  Also, the software version has been modified to indicate "Picasa".
    It bothers me that a world class product like LIghtroom is not robust enough to work on these files when everything else I have tried does work.  The problem is LIghtroom is the primary tool in my workflow.
    So has anybody seen this and know of a way to fix it?

    @Pete -
    Thanks for the feedback, but my I think my concern is valid.  Whatever Picasa is doing to the photo other apps like Apple Preview and CS5 can deal with it.  Lightroom cannot.  I am not explicitly modifying the files in Picasa just using Picasa to catalogue the faces.  So yes, I will quit using Picasa, but I still have hundreds (if not thousands) of photos that can no longer be processed by Lightroom and I need guidance on how to best recover these photos.
    I didn't know whether the Image Unique Id is standard or not, but I do know it does not show up in the files that work, only in the files that do not work.  I just assumed that it was non-standard because I did not see it on functioning files.
    Also, I would argue that Lightroom should be better able to handle this kind of situation instead of just not working.  Thanks again.

  • Lightroom 5: All photos now "Error working with this photo"

    I went back to my lightroom catelog, where a lot of my photos are all on my NAS, and now all the photos are unable to be edited. "There was an error working with this photo."
    Everything was working for awhile, but now every single photo is erroring out.
    In the finder, i still see the photos perfectly fine. I even opened up the good 'ol Photo Mechanic 5 and opened a contact sheet, and these photos still worked. So it's not like they're corrupted or completely gone.
    I created another new lightroom catelog, and tried to import the photos again. But when I select the directory the photos are in, it's empty for about 10 minutes, then shows all the photos but with "Preview unavailable for this file."
    The big caveat are all these photos are on a networked NAS (Synology). I'm accessing it over WiFi which is probably the biggest problem.
    The folder was mounted as a NFS folder. It was disconnected once when I had a power outage (damn wind). I since re-mounted the folder and all that. I'm not entirely sure if that's what did it or if these errors started happening after that or not. But I've moved photos to my NAS folder in my catalog just today, and they are now erroring as well. So it's not like the older ones are erroring. Just all of them are.
    Mac OSX - Mavericks 10.9
    32GB Ram / 3.4GHz Intel Core i7
    Lightroom 5
    Files are all: DNG/ARW/NEF

    I'm sorry I can't be more helpful, but there are lots of messages in the forums about Lightroom problems specifically related to Synology NAS. 
    Have you spoken to Synology about this?

  • I have a Nikon 300S. It is set to NEF(RAW) + JPEG fine. When I import to Lightroom I get message "There was an error working with the photo? Does anyone know why or how to correct?

    Nikon 300S. It is set to NEF(RAW) + JPEG fine. When I import to Lightroom I get message "There was an error working with the photo? Does anyone know why or how to correct?

    I don't know the answer, personally, because I don't use Lightroom. This is the Camera Raw forum.
    Someone here might answer your question, as there are a lot of clever people here, but, if not, you might try here:
    Photoshop Lightroom

  • "there was an error working with this photo"

    I am new to the forums.
    I have been using a Windows Vista computer with I believe an older version of LR.  I thinkg it is 4.??
    When i would plug in my memory i would use LR to import my pictures and import them to an external hard drive connected to my WiFi router.
    I never had a problem with it.
    I recently made the move to Apple and got an iMac.  I downloaded and installed LR on my iMac and then imported the photos with no problem.
    Now when i try and view the phots they are coming up grainy and getting an error:
    " there was an error working with this photo"
    I then look down at the thumbnails view and all of them are showing ! in the upper right corner.  So i click on it and get another error:
    "Lightroom has encountered problems reading this photo.  You will not be able to make adjustments to this photo"
    When I look at the import section i get "preview unavaible for this file"
    I would say i am a newbie to LR and i really only used it to import and manage my photos.  I have no idea where to begin troubleshooting.
    Any and all help would be greatly apprecaited.
    Thanks

    Yes. When I am watching, it seems to complete the autowrite in a few seconds after making a change.

  • Building a Hyper-V Cluster with Server 2012 R2

    I'm building a 3 node Hyper-V cluster with Server 2012 R2.  I create the cluster but the report is telling me I should configure a disk witness as a best practice.  Do I need that with a 3 node cluster.  In 2008 R2, 3 nodes give me node majority
    and I'm good to go.
    Thanks
    SMaximus7

    True, but Windows Server 2012 introduced a dynamic quorum capability.  When you have an odd number of nodes in the cluster, you really don't need to have a witness to ensure availabilty.  But with the witness what happens is that if you lose a
    node a witness comes in, so there are three quorum votes - one for each surviving node and the witness.  Then, if another node fails, the cluster will continue to be operational because now you have the witness and the surviving node to maintain quorum.
    Not absolutely needed, but a real nice to have.  And, since it just takes such a small disk for a disk witness, or a file share for a file share witness, there is no really reason not to include it.
    . : | : . : | : . tim

  • How do I do a Windows 7 restore as a Hyper-V clent with Server 2012 Essentials R2?

    How do I do a Windows 7 restore as a Hyper-V client with Server 2012 Essentials R2?  There is no client restore CD available as an ISO to mount as the CD.
    Scott

    Hi,
    As we know, to simplify the bare metal restore scenario, we implemented the Client Restore Service in Windows Server 2012 R2 Essentials, which will enable WDS on the Windows Server Essentials
    server and configure the client restore image as a boot image. With the Client Restore Service turned on, the administrator can initiate a PXE boot on a client computer by using a network interface to launch the Client Restore Wizard and restore the client
    computer. There’s no need to prepare a client restore DVD, or a client restore USB bootable key. For details about how to perform the client restore, please refer to the following article.
    Set Up Client Restore on Server 2012 R2 Essentials
    http://www.mcbsys.com/techblog/2014/01/set-up-client-restore-on-server-2012-r2-essentials/
    Hope this helps.
    Best Regards,
    Andy Qi
    Andy Qi
    TechNet Community Support

Maybe you are looking for