SSIS - "Insufficient Connection information was supplied" problem

Hello,
I have connection problem with my SSIS package. Setup is as follows:
Package includes 150+ dataflows that pump data from Informix tables to MS SQL Server tables
Setup of each dataflow consists of ADO.NET source (newest driver version 4.10 for Windows x64) and OLEDB destination pointing to SQL Server 2012
Data components are linked to connection managers, which are parametrised. Connection string is set from one parameter and password from another (sensitive) parameter
All dataflows are in one big container to achieve maximal parallelism (parameter MaxConcurrentExecutables = -1) and highest performance.
Most of the time, it works correctly. But ca. 1 out of 10 runs, I get following error:
Error: ADO NET Source has
failed to acquire the connection {3DC4A80D-EC92-4551-
B607-B0D2E2652F43} with the following error message:
"ERROR [HY000] [Informix .NET provider][-11302]
Insufficient Connection information was supplied".
When I then re-run the package with identical configuration, it runs fine. Informix support told me, that from their point
of view everything seems OK. They tried to simulate this error and ran test with ca. 50 dataflows (but with password supplied in connection string) and it ran correctly.
So they assume, that problem lies within SSIS, which sometimes simply fails to supply password to ADO.NET source
and it fails. Do you have any suggestion where might be problem?
Thanks for cooperation

Hi duffmansk,
According to your description, it supposed to be the performance issue. I suggest you can run the packages in more network traffic time, increase the hardware and virtual memory of your computer to test again. For adding virtual memory, please go to System
Properties -> Advance -> Performance Options -> Advance -> Virtual Memory, increase the size for Virtual Memory.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Similar Messages

ITunes Connect : "There was a problem processing your upload"

Hello.
Anyone got this message while uploading your application? I got that once and then I tried right away to upload my app, and it succeeded.
My upload was only about 8-9MB.
Anyone else experienced this or your app uploaded just fine the first time?

Asmaa,
Other than using the suppport phone number, you may try a chat here:
Creative Cloud support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

There was a problem connecting to the printer. Make sure it's connected and try again

A test page prints ok. However when I come to print any document I get this message:
"There was a problem connecting to the printer. Make sure it's connected and try again"
I have uninstalled the printer and re-installed it and rebooted my computer. Still printing a tet page but won't print anything else.

Hi @davifels,
Welcome to the HP Forums!
I see that you are getting the error message, "there was a problem connecting to the printer. Make sure it's connected and try again." With your HP Envy 4500 printer running on Windows 8.1 (64-bit). I am sorry to hear this, but happy to help!
For further assistance, I will need the following information:
If the printer is connected, Wireless, or USB.
If the printer is able to make copies. Copy Text or Mixed Documents.
If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
If the printer can print from NotePad.
In the meantime, please take a look through this guide, 'Printer is offline' Message Displays on the Computer and the Printer Will Not Print: Windows 8.
Hope this guide helps, and hope to hear from you soon!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

How do I get connected to a server on my network via an IP address? When I try to open in a URL and login as a registered user with proper login it errors out saying there was a problem with connecting to the server?

I am new to Mac...How do I get connected to a server on my network via a hyper link IP address path? When I try to open in a URL and login as a registered user with proper login it errors out saying there was a problem with connecting to the server?

Some of the following is going to use some technical terms — this area is inherently somewhat technical.
If you don't understand some part of the following reply, please ask.
Is this your own OS X Server system on your own network, or is this some other server within some larger organization?
You're posting this in the OS X Server forum, which is a software package that allows OS X systems to provide web-based and many other services; to become servers.
If it's your OS X Server on your network, then the network and DNS configurations are suspect, or the server is somehow malfunctioning or misconfigured. This is unfortunately fairly common, as some folks do try to avoid setting up DNS services.
If it's a larger organization and somebody else is managing the server and the network, then you'll probably need to contact the IT folks for assistance; to learn the network setup and DNS requirements, and if there's a problem with the server itself.
The basic web URL "hyper link IP address path" — without using DNS — usually looks something the following, where you'll need to replace 10.20.30.40 with the IP address of your server:
http://10.20.30.40
UptimeJeff has posted a URL that specifies the AFP file system; an OS X file share. That's used if you're connecting to an Apple storage service somewhere on your network. You might alternatively need to specify smb://10.20.30.40 or such, if it's a Windows file server. (There can be additional requirements for connecting to Windows Server systems, too.)
If there's local IT staff available here, please contact them for assistance. If these are your own local systems and your own local OS X Server system, then some information on the server will be needed. (If you're on a NAT'd network, you'll also need to get DNS services configured and working on your local OS X Server system and your network — you'll not be able to skip this step and reference ISP DNS servers here — or things can and usually will get weird.)

WUC-17 Information was missing from the supplied file download request java

Dear Forms Guru,
Can anybody help why i'm receiving this error using webutil.
WUC-17 Information was missing from the supplied file download request java..
the result in my jinitiator console are the ff:
Loading http://oracleserver.hfgmgroup.hfgm:8889/forms90/webutil/webutil.jar from JAR cache
Loading http://oracleserver.hfgmgroup.hfgm:8889/forms90/webutil/jacob.jar from JAR cache
Loading http://oracleserver.hfgmgroup.hfgm:8889/forms90/java/f90all_jinit.jar from JAR cache
RegisterWebUtil - Loading WebUtil Version 1.0.5 Production
Loading http://oracleserver.hfgmgroup.hfgm:8889/forms90/java/toolbar_images.jar from JAR cache
connectMode=HTTP, native.
Forms Applet version is : 90290
2005-Feb-13 01:48:19.514 ERROR>WUC-17 [VBeanCommon.downloadFromURL()] Information was missing from the supplied file download request java.net.MalformedURLException: unknown protocol: c
2005-Feb-13 01:48:33.504 ERROR>WUC-17 [VBeanCommon.downloadFromURL()] Information was missing from the supplied file download request java.net.MalformedURLException: unknown protocol: c
2005-Feb-13 01:48:34.04 ERROR>WUC-17 [VBeanCommon.downloadFromURL()] Information was missing from the supplied file download request java.net.MalformedURLException: unknown protocol: c
Many thanks in advance...
benjie

Benjamin,
WebUtil tries to download the jacob.dll to the client. The error message you get is most likely caused by teh following section in teh webutil.cfg file
install.syslib.location=/webutil
## Do not change the following lines unless instructed to do so
install.syslib.0.7.1=jacob.dll|94208|1.0|true
install.syslib.0.9.1=JNIsharedstubs.dll|65582|1.0|true
install.syslib.0.9.2=d2kwut60.dll|192512|1.0|true
## But you can add your own libraries in here
#install.syslib.0.user.1=testwebutil.dll|204872|1.0|true
If you have all these files available on the PC, then most likely the problem can be found in the virtual path setting for this directory
<virtual-directory virtual-path="/webutil"
real-path="c:/webutil/lib" />
in /j2ee/Oracle9iDS/application-deployments/forms/forms90web/orion-web.xml
Pleae refer to the webutil documentation for teh exact configuration steps.
Hope this helps
Frank

There was a problem connecting to the server (again)

Dear All
There have been many posts with "problem connecting to the server" errors, but they all one way or another get corrupted with Time Machine responses. I have seen threads with a similar problem to mine, but there is no clear answer. So, for this thread please do not make reference to Time Machine. I have never used it.
I get an error "There was a problem connecting to the server "NAME""
The server may not exiost or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again.
The server is my old laptop running Snow Leopard. I don't use this computer anymore because I have bought a MacBook Pro riunning LIon.
The error is on my iMac, which I have recently upgraded to Lion. Now that I am not using my Snow Leopard laptop this error is impossible; my iMac is becoming unusable because I cannot type more than 10 words without this error warning.
As I said, I do not use Time Machine, so that cannot be the problem. It is off. I simply need my iMac to completely forget about my old laptop.
Any help appreciated.
M.

Hope you are doing well TFam5;
Are you having this problem constantly?
I want to help but in order to do so I will need more information in regards your devices and configuration, please include all this,.
What is the operating system that your system utilizes?
Use this example as a guide Windows 7 home premium 64 bits. The reason we ask your Operating system in all post in due to the fact that I want provide you with detailed suggestion and in other to accomplish some of the instructions that we will provide are operating system dependent or different in different versions of the OS, in short words if you want me to guide thru the process I will need the operating system, the version and the intructiosn width (32 or 64 bits)
What is the complete printer model?
HP Photosmart Plus All-in-One Printer - B209a ›
HP Photosmart Plus e-All-in-One Printer - B210a ›
HP Photosmart Plus e-All-in-One Printer - B210b ›
HP Photosmart Plus e-All-in-One Printer - B210c ›
HP Photosmart Plus e-All-in-One Printer - B210e ›
Some printer models have as much as 6 different versions is important to know which version exactly do you own in order for me to provide accurate links for your product If you are having issues with your finding the complete version of your product please visit this site. http://h10025.www1.hp.com/ewfrf/wc/document?tmp_renderType=findModel&cc=us&dlc=en&docname=bpy21016&l...
Provide this info and I will do my best to help you.
Regards.
RobertoR
▼
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

There was a problem connecting to the Server. Touch Retry to connect again, or OK to Exit" HELP!

There was a problem connecting to the Server. Touch Retry to connect again, or OK to Exit."
I have a newer model HP Photosmart Plus (Print/Scan/Copy/Web)
Keep getting this error message. Have pressed Retry, have exited and tried again. No results. Have shut off/unplugged/restarted printer and computer several times, but this keeps popping up as soon as I press "Apps". All I can access is "quick forms", and they don't print correctly (layouts are strange). Anyone know how to fix this?

Hope you are doing well TFam5;
Are you having this problem constantly?
I want to help but in order to do so I will need more information in regards your devices and configuration, please include all this,.
What is the operating system that your system utilizes?
Use this example as a guide Windows 7 home premium 64 bits. The reason we ask your Operating system in all post in due to the fact that I want provide you with detailed suggestion and in other to accomplish some of the instructions that we will provide are operating system dependent or different in different versions of the OS, in short words if you want me to guide thru the process I will need the operating system, the version and the intructiosn width (32 or 64 bits)
What is the complete printer model?
HP Photosmart Plus All-in-One Printer - B209a ›
HP Photosmart Plus e-All-in-One Printer - B210a ›
HP Photosmart Plus e-All-in-One Printer - B210b ›
HP Photosmart Plus e-All-in-One Printer - B210c ›
HP Photosmart Plus e-All-in-One Printer - B210e ›
Some printer models have as much as 6 different versions is important to know which version exactly do you own in order for me to provide accurate links for your product If you are having issues with your finding the complete version of your product please visit this site. http://h10025.www1.hp.com/ewfrf/wc/document?tmp_renderType=findModel&cc=us&dlc=en&docname=bpy21016&l...
Provide this info and I will do my best to help you.
Regards.
RobertoR
▼
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

X61 - Vista Business - Client Security Solution Error - There was a problem connecting to the TPM

During startup my x61 has been displaying the following message, 'Client Security Solution' - "There was a problem connecting to the TPM (security device) ont his computer. It is possile that anti-virus or firewall software is blocking the connection. A missing or disabled device driver could also cause this problem. Please refer to the online documentation for more information".
I have spent an extraordinary amount of time and effort to find identify the cause and a solution for this problem. It occurs whether or not virus software is enabled or disabled and numerous calls to Lenovo, Symantec, Kaspersky, and Microsoft have resulted in finger pointing and no answers. None of the vendors acknowledge the problem yet this same issue is a significant topic of concern as found in various blogs and 'help' sites. Lenovo thought it was hardware and changed the motherboard. Lenovo told me to call Microsoft since it was a Vista issue. Microsoft told me to call Lenovo since Vista Business was preinstalled on the machine. Lenovo told me to call Microsoft and so it goes. I removed Symantec's anti-virus and replaced it with Kaspersky.
The strangest thing is that the module works intermitently and it seems that everytime a Lenovo update is performed (via Thinkvantage) the problem reoccurs for sometime.
Does anyone out there have an understanding of the cause and a potential solution???

I have the same problem on an X 60 platform, which only surfaced in the last two weeks subsequent to running all of the Lenovo updates. Prior to this, I had reinstalled all programs, starting with the Recovery Disks for the Think Pad. Everything, including start up, was exceptionally fast. Once I ran the most recent BIOS updates, along with several others, this error message surfaced. It is intermittent, however, and I have not noted an issue.
In reviewing several other Message Boards, I have seen this issue raised several times. Here is a link to a thread where the individual did achieve a solution through Lenovo, but their response is nonspecific as to what they did: (http://forums.lenovo.com/lnv/board/message?board.id=T400_series_ThinkPads&message.id=7143&query.id=1...

I keep getting an error "There was a problem connecting to the server" ....and an ip address is listed

Every time I print to a pdf I get an error message that there was a problem connecting to a server. I am running a mac with windows parallels and the error happens in parallels. It seems that somehow the PDF software has captioned a deleted IP address and keeps pointing to this and as this IP address does not exist it produces the error. Can someone help me as I need to find where PDF stores this information and delete it..as it is driving me crazy as the error is continuous. Thank you

Look in the System Preferences -> Accounts. Click on the Login Items tab. I bet there is an entry for your drive. Use the "-" to delete it.

"cannot retrieve download information please connect to itunes" ? problem,

what does "cannot retrieve download information please connect to itunes" mean?
lately, my ipod has been acting weird, about 3 days ago, it wasn't able to access the 'Updates" section of the mobile store. Now it can, so I downloaded the Tap Tap update, it tells me to go hook it up to my computer and now this message pops up on my ipod every 5 min.

I had this same problem with the message cannot retrieve download information please connect to itunes. Everything else on the ipod works fine, but you might notice that the ipod is displaying the wrong time, or the time keeps changing. the time thing sometimes occures with this problem just something esle I noticed wrong. The good news is that the problem is not with the ipod or your connection, It is a problem with Itunes, if your computer hibernates while itunes is open and you wake it up and plug your ipod in it screws up stuff with the itunes store and also messes with your time, to solve this problem all you need to do is to is to close itunes, reopen it plug your ipod in and hit sync. pluging your ipod into your computer after it has hibernated and itunes was open causes this problem, so just always restart Itunes before you plug in your ipod after hibernating. hope this helps

There was a problem connecting to server

Hello,
I got an error like: " There was a problem connecting to the server "Time-Capsule.local"
This happens when I connect my MacBook to the power supply being not in the same network with the TimeCapsule. It seems like Lion tries to start a backup tough there isn't my timecapsule.
Has somebodey an idea what to do?

Yes this is new and very annoying.
I've been using a time machine backup and a time capsule for a few months now. I'd just leave time machine running and when I was at home it'd backup and when I was at work it's just silently fail to connect and not bug me. Then it'd reconnect when I got home and backup again. This was perfect. It would eventually pop up a dialog if I left it for too many days where it couldn't backup but that was pretty rare.
Now I get a dialog popping up on schedule every hour that I'm at work telling me that it can't connect.
a) I know
b) I don't care
c) how do I shut it up.
This seems to have changed in the last few days - I assume that it was a patch though I've got to say that I didn't notice one.

Lync 2013. There was a problem connecting with the Exchange. Unable to load the magazine discussions.

Lync 2013. There was a problem connecting with the Exchange. Unable to load the magazine discussions.
Installed Lync Server Standart 2013, client PC MS Office 2013.
As the mail system - Lotus Notes Domino Server and Lotus Notes client, respectively.
Exchange is not installed at all.
question:
1 What is the message: "There was a problem connecting with Exchange. Unable to load the magazine discussions." and how it is fraught?
2 How can I fix this message? Cleaning the C: \ Users \% UserName% \ AppData \ Local \ Microsoft \ Office \ 15.0 \ Lync \ does not help
3 What are the disadvantages when using Lync Server Standart 2013 without Exchange? In principle, I put for Lync Exchange?
4 What are the advantages when using Lync Server Standart 2013 with Exchange?
5 Is it possible to work simultaneously Lync Server Standart 2013 + Exchange + Lotus Notes
Thank you.

1) That sounds like a strange translation. But basically, it wants to connect to Exchange and it's complaining.
2) You can attempt to go to Tools->Options->Personal and set Personal Information Manager to None, and in Lync Management Shell run set-csclientpolicy
http://technet.microsoft.com/en-us/library/gg398300.aspx with the following options:
DisableCalendarPresence $True
DisableEmailComparisonCheck $True
EnableExchangeContactSync $False
There may be more, I've never tried to completely disable Exchange features from Lync.
3) No conferencing plugin for meeting invites, no automatic presence management based upon your calendar, no searching your Outlook contacts for new contacts, no voicemail, no conversation history,no unified contact store, and more:
http://technet.microsoft.com/en-us/library/jj688098.aspx
4) This is just #3 in reverse :)
5) Depends on your goals, but the experience wouldn't be great. You'd want to keep your contacts and calendar in Exchange and your email in Notes. It would be confusing to your users.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications

Hi, I am trying to update an iPhone 4 from iOS 4.3.3 to iOS 7.0.4, and every time I try to update it comes up with an error message saying that there was a problem because the network connection was reset. Is there any way I can get past this and update?

The full message said:
There was a problem downloading the software for the iPhone "Judy's iPhone 4". The network connection was reset.
Make sure your network settings are correct and your network connection is active, or try again later.
I am trying to update the iPhone for my grandmother, Judy, as I am leaving for Paris on Wednesday night and we want to have Facetime installed on her iPhone before then, so we can stay in contact with each other. It is the simplest way for this to happen but the program simply will not allow me to update her iPhone.
Is there any way to get past this error and update her iPhone? Any help will be greatly appreciated.

Dear Jody..jone5
Good for you that can't update your iphone because I did it and my iphone dosen't work for example I can't download any app like Wecaht or Twitter..
Goodluck
Atousa

There was a problem updating InDesign CC For more information see the specific error below. Update Failed Download error. Press Retry to try again or contact customer support.(49)

Posted the entire text from the error window, when trying to update, using the normal NON-TECHIE way to update any and all Adobe CC products, via the Creative Cloud updater installed when Adobe Creative Cloud subscription was purchased when first offered.
The following occurs, ad nauseam:
There was a problem updating InDesign CC
For more information see the specific error below.
Update Failed
Download error. Press Retry to try again or contact customer support.(49)
Here's the crux of my frustration:
(1) Customer Service is NOT contact-able, to receive LIVE help.
(2) There is NO way for me to mitigate this "Download error", being a student learning InDesign, and NOT in any way capable of tweaking folders/files here and there.
Therefore, the real question:
Given that a significant number of subscribers are having the above referenced issue with attempting to download the current update for InDesign, WHAT ARE WE SUPPOSED TO DO, in order to get our contractually paid-for updates to our legally and contractually paid-for Adobe software, specifically in my case, InDesgin's current update?
Please, NO TECHNICAL mumbo-jumbo which most likely will cause the overwhelming majority of users, like me, to seriously corrupt their computer files, but rather an honest, straightforward "what to do" from real CS/Engineers working for Adobe, as to how to FIX this issue, period.
===========================================================
UPDATE:
Here is a way in which I think I was able to "update" my InDesign CC application:
(1) Sign-In to your Adobe Account
https://www.adobe.com/
(2) Click on the MENU icon
(3) Click on the product InDesign icon
Your browser should display the page for Adobe InDesign CC
https://www.adobe.com/products/indesign.html?promoid=KLXLU
(4) Click on the Download icon,
Your browser should now display the page to download InDesign,
https://creative.adobe.com/products/download/indesign
(5) a Pop-Up window should open, and display:
Launch Application
This link needs to be opened with an application.
with the first option to select being the CreativeCloud(URIHandler)
(5) Select this application and click OK.
What happened when I followed steps (1) thorugh (5) is that:
(a) InDesign CC(2014) was installed,
(b) InDesign CC, updated, and then
(c) InDesign CC(2014), also updated.
Why this all worked, is a mystery to me.
Looks like a separate, "new" version of InDesign, InDesign CC(2014), was installed, the existing "old" InDesign was updated, and then the newly installed Indesign CC(2014) was further updated.
A BIT MORE, when I launched my InDesign CC app, and checked to see if there were Updates Available, there in fact was an Adobe InDesign CC 64 bit (9.2.2) update.
I clicked on UPDATE and my "old" InDesign CC app was "successfully updated."
FURTHER INFO: I may have neglected to list some important info ... OS: Windows 8.1 Pro with Media Center, 64-bit
Confused, I am able to launch BOTH of these apps, and hopefully I may use one of these versions of the InDesign CC app, to do some InDesign work.
Will keep y'all posted!
Message was edited by: Richard Yapkowitz, about an hour after I first posted this issue.

Jackdan error 49 indicates the installer was unable to access a critical file or directory. You can find additional details at Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html.

I'm trying to set up my Ipod, but when I go to sign in with an apple ID it says 'Could not sign in: there was a problem connecting to the server'.

I just bought a 3rd generation ipod touch. It was professionally refurbished. I'm trying to set it up, and everything seems to be working fine, until we get to the wifi. I live on campus and our wifi is username and password protected. I signed in and everything seemed to work fine, and in the top left hand corner I have all the bars for wifi. However, when I go to sign in with an apple ID it says 'Could no sign in: there was a problem connecting to the server'. I've tried turning it on and off again, tried signing on to our wifi again, but it all isn't working. What can I do?

I also encountered the same problem. Try using a different email address or try signing in later.

SSIS - "Insufficient Connection information was supplied" problem

Similar Messages

Maybe you are looking for