SSIS package fails when Configuration value has value saved into the package
when a package is migrated from dev to QA and to PROD sometimes it fails since the variables have values in them saved into the package.
what we do is clear these values manually and restart the job.
Is there a way we can clear the variables when saving the package or at least programmatically?
eddy.a
Hello Arthur
Thank you for your response. I should start by apologizing by not making myself clear. We do use indirect configuration that work cross environments however this is the issue that we have:
when the package is first created say you create a DB Variable called A and you enter value A in the variable to test the package. After the package development is tested, you change the configuration values to fetch data whether from an excel file or from
an XML.
when you run on environment A the package runs fine however when you move over to environment B it seems that first it validates against A then overwrites B - if environment A is not there anymore the package sometimes fails.
we are changing these manually for now but I was wondering if there's a way to prevent it.
thanks
eddy.a
Similar Messages
-
What should be stored in the DB when a special char is saved into the db?
Hello,
We have a 9.2.0.6 DB with charset as UTF8. We are putting the special character 'अ' into the database through a j2ee application. The application stores and displays the special character properly.
My question
1) When the special character is stored in the database, what should it be stored as? Should it store the HTML Entity (decimal) value - अ or should it store UT-8 (hex) value - e0a485?
2) When the data is viewed through a different application, it displays &32309; instead of 'अ'. Both the applications are almost similar. Any pointers on what need to be looked into would be appreciated
A few details on the special character 'अ'
This is a Hindi letter - Devanagari letter A
The URL below has all the unicode information on this special character
http://www-950.ibm.com/software/globalization/icu/demo/unicode?ch=0905
Thank youIf you are trying to view the character using Windows, the following metalink note may help
Note:179133.1 The correct NLS_LANG in a Windows Environment
iSQL is the only UTF-8 compliant client provided by ORacle, try it.
regards -
I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device (iPhone) using debug build. When running with a release build, the result handler is never called (nor is the fault handler called). Viewing the BlazeDS logs in debug mode, the call is received and send back with data. I've narrowed it down to what seems to be a data size issue.
I have targeted one specific data call that returns in the String value a string length of 44kb, which fails in the release build (result or fault handler never called), but the result handler is called as expected in debug build. When I do not populate the String value (in server side Java code) on the object (just set it empty string), the result handler is then called, and the object is returned (release build).
The custom object being returned in the call is a very a simple object, with getters/setters for simple types boolean, int, String, and one org.23c.dom.Document type. This same object type is used on other other RemoteObject calls (different data) and works fine (release and debug builds). I originally was returning as a Document, but, just to make sure this wasn't the problem, changed the value to be returned to a String, just to rule out XML/Dom issues in serialization.
I don't understand 1) why the release build vs. debug build behavior is different for a RemoteObject call, 2) why the calls work in debug build when sending over a somewhat large (but, not unreasonable) amount of data in a String object, but not in release build.
I have't tried to find out exactly where the failure point in size is, but, not sure that's even relevant, since 44kb isn't an unreasonable size to expect.
By turning on the Debug mode in BlazeDS, I can see the object and it's attributes being serialized and everything looks good there. The calls are received and processed appropriately in BlazeDS for both debug and release build testing.
Anyone have an idea on other things to try to debug/resolve this?
Platform testing is BlazeDS 4, Flashbuilder 4.7, Websphere 8 server, iPhone (iOS 7.1.2). Tried using multiple Flex SDK's 4.12 to the latest 4.13, with no change in behavior.
Thanks!After a week's worth of debugging, I found the issue.
The Java type returned from the call was defined as ArrayList. Changing it to List resolved the problem.
I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid. And, why it works in Debug mode and not in Release build is even stranger. Maybe someone can shed some light on the logic here to me. -
Hi! ... When configuring my new iPad, it says the UserId is already in use and I cannot progress any more. Of course it's in use, it's my UserId. How do I continue ?? ... Thanks in advance
Did you select "Sign In with an Apple ID" as opposed to "Create a free Apple ID" when setting it up?
-
So how do I get notified of updates in this forum? As I said: I don't understand the thing you call LIVE BOOKMARKS I have never used them, and most forums I have used notify VIA E-mail not giving out my E-mail address, or other private information when a reply has been made to the thread in question, so how do I get notified of updates in this forum? I have seen no normal options for setting my viewing preferences used for this forum. Thank You.
Thanks for your reply via email/msg. He wrote:
If you are interested in the actual design data for the Xeon processor, go to the Intel site and the actual CPU part numbers are:
Xeon 4 core - E5.1620v2
Xeon 6 core - E5.1650v2
Xeon 8 core - E5.1680v2
Xeon 12 core - E5.2697v2
I read that the CPU is easy to swap out but am sure something goes wrong at a certain point - even if solderedon they make material to absorb the solder, making your work area VERY clean.
My Question now is this, get an 8 core, then replace with 2 3.7 QUAD CHIPS, what would happen?
I also noticed that the 8 core Mac Pro is 3.0 when in fact they do have a 3.4 8 core chip, so 2 =16? Or if correct, wouldn't you be able to replace a QUAD CHIP WITH THAT? I;M SURE THEY ARE UO TO SOMETHING AS 1) WE HAVE SEEN NO AUDIO FPU OR PERHAPS I SHOULD CHECK OUT PC MAKERS WINDOWS machines for Sisoft Sandra "B-E-N-C-H-M-A-R-K-S" -
SOMETHINGS UP AND AM SURE WE'LL ALL BE PLEASED, AS the mac pro was announced Last year, barely made the December mark, then pushed to January, then February and now April.
Would rather wait and have it done correct than released to early only to have it benchmarked in audio and found to be slower in a few areas- - - the logical part of my brain is wondering what else I would have to swap out as I am sure it would run, and fine for a while, then, poof....
PEACE===AM SURE APPLE WILL BLOW US AWAY - they have to figure out how to increase the power for 150 watts or make the GPU work which in regard to FPU, I thought was NVIDIA? -
I made the mistake when configuring a external monitor, of changing the mhz to 75. When I close the MBP I now get a black screen on the monitor. How do I change it back?
I have a MacBook Pro with the latest operating system, trying to configure a Gateway flat monitor with vga.
ThanksApple menu -> System Preferences -> Displays.
System Preferences can also be found in the Hard drive -> Applications folder.
Resetting the PRAM can help bring displays back to factory settings if you can't find what you need:
http://support.apple.com/kb/ht1379 -
few times to run the back up and it has previously worked fine. When i try to connect it into the computer it is not recognised and will not do anything at all??
By calling iPod tech support while you are under warranty. You also have 14 days to return it w/no questions asked for a replacement or your $$$ back.
-
Project Managers to know when a task has been updated for the last time
Hi,
I would like know if there is any timestamp feature in Project Server 2007, so that it can be possible for Project Managers to know when a task has been updated for the last time.
Thanks in advanceHi,
If you are using the My Tasks to drive the task updates then you can use the 'Applied Requests and Errors' available under 'Go To' in the Task Updates area. Here the PM can find when requests have been approved and how many updates he/she received for a
particular task (by clicking the task name) etc.
Hope this helps
Paul -
When a song has Album Only where the price should be does that mean I'll get it when I purchase the entire album in iTunes?
yes
-
Revision: 8190
Author: [email protected]
Date: 2009-06-24 12:26:02 -0700 (Wed, 24 Jun 2009)
Log Message:
make sure the HaloClassic theme is not copied into the package b/c it is no longer supported in flex 4
bug: https://bugs.adobe.com/jira/browse/SDK-20729
qa: no
doc:
checkintests: pass
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-20729
Modified Paths:
flex/sdk/trunk/build.xmlGordon, it looks like its been a while since you made this post. Not sure how valid it is now... I am particularly interested in the LigatureLevel.NONE value. It seems that it is no longer supported.
How do I turn of ligatures in the font rendering?
My flex project involves trying to match the font rendering of Apache's Batik rendering of SVG and ligatures have been turned off in that codebase. Is there any way (even roundabout) to turn ligatures off in flash?
Thanks,
Om -
Computer freezes when inserting a USB Bus Card into the slot.
I use this card as a way to capture video in FCE. I also have 2 external HD's which I use a scratch disks. I have used this configuration in the past and it has worked properly, however now, when I insert my USB card into the slot the computer freezes, has to be shut down, and I get this error message.
Can anyone tell me what's up? Thanks from Korea!!!
Daryn
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000000000014 PC=0x000000000048EE94
Latest crash info for cpu 0:
Exception state (sv=0x4263AA00)
PC=0x0048EE94; MSR=0x00009030; DAR=0x00000014; DSISR=0x42000000; LR=0x0048EE84; R1=0x2C623B20; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0048EE84 0x0048ED44 0x00463C94 0x0048E550 0x002C0CE0 0x002C0AA8
0x002C1510 0x002C1B1C 0x000A9514
Kernel loadable modules in backtrace (with dependencies):
com.apple.driver.AppleUSBOHCI(2.5.5)@0x48d000
dependency: com.apple.iokit.IOUSBFamily(2.5.9)@0x462000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x483000
com.apple.iokit.IOUSBFamily(2.5.9)@0x462000
Proceeding back via exception chain:
Exception state (sv=0x4263AA00)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x42429280)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
Kernel version:
Darwin Kernel Version 8.9.0: Thu Feb 22 20:54:07 PST 2007; root:xnu-792.17.14~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x000952D8 0x000957F0 0x00026898 0x000A8004 0x000AB980
Proceeding back via exception chain:
Exception state (sv=0x4263AA00)
PC=0x0048EE94; MSR=0x00009030; DAR=0x00000014; DSISR=0x42000000; LR=0x0048EE84; R1=0x2C623B20; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0048EE84 0x0048ED44 0x00463C94 0x0048E550 0x002C0CE0 0x002C0AA8
0x002C1510 0x002C1B1C 0x000A9514
Kernel loadable modules in backtrace (with dependencies):
com.apple.driver.AppleUSBOHCI(2.5.5)@0x48d000
dependency: com.apple.iokit.IOUSBFamily(2.5.9)@0x462000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x483000
com.apple.iokit.IOUSBFamily(2.5.9)@0x462000
Exception state (sv=0x42429280)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
Kernel version:
Darwin Kernel Version 8.9.0: Thu Feb 22 20:54:07 PST 2007; root:xnu-792.17.14~1/RELEASE_PPCModel: PowerBook5,5, BootROM 4.8.6f0, 1 processors, PowerPC G4 (1.1), 1.5 GHz, 2 GB
Graphics: ATI Mobility Radeon 9700, ATY,RV360M11, AGP, 128 MB
Memory Module: SODIMM0/J20STANDARD, 1 GB, DDR SDRAM, PC2700U-25330
Memory Module: SODIMM1/J23REVERSED, 1 GB, DDR SDRAM, PC2700U-25330
AirPort: AirPort Extreme, 405.1 (3.90.34.0.p18)
Modem: LastDash, UCJ, V.92, 4.0, APPLE VERSION 2.6.6
Bluetooth: Version 1.7.14f14, 2 service, 1 devices, 1 incoming serial ports
Network Service: Built-in Ethernet, Ethernet, en0
PCI Card: TXN,PCIXXXX-00, cardbus, PC Card
Parallel ATA Device: MATSHITADVD-R UJ-825, 565.88 MB
Parallel ATA Device: Hitachi HTS541080G9AT00, 74.53 GB
USB Device: Bluetooth HCI, Up to 12 Mb/sec, 500 mA
USB Device: Kensington PocketMouse Pro, Kensington, Up to 1.5 Mb/sec, 500 mA
FireWire Device: 1394 Storage Front Panel*, Maxtor, Up to 800 Mb/sec
FireWire Device: LaCie d2 Extreme LUN 0, LaCie Group SA, Up to 400 Mb/sec
Powerbook G4 Mac OS X (10.4.9)Bad card
-
When I download firefox, using recommended setting, or my own, all the sub files/folders like plugins, modules, updater end up on the desktop as well as in the file location. And when I try to put them into the file location, they don't. And when I delete them, FireFox won't open. I tried deleting FireFox and reinstalling it multiple times, and a message pops up sometimes that says FireFox may not have installed correctly, so I follow the steps, but all the extra icons on my desktop don't go away. This has happened every time I have downloaded FireFox. The browser itself works, but I need to know how to get rid of these icons, but still be able to use FireFox. This is on a new computer, with Windows 7.
== I downloaded FireFox. ==
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.6) Gecko/20100625 Firefox/3.6.6Managed to solve this myself. Just went to properties > hidden.
-
Somehow my iTunes app has been put into the trash. How can I get this and all of the stuff that was in it back to my Application folder? I try to drag it out of trash, but it won't work.
Also, when I do try to drag it out of the Trash to put it back into Applications (on the Finder sidebar), it asks me to authenticate with the administration password. I enter it, and then a window appears saying that I can't do that because I do not have permission to modify iTunes. Please help.
-
Anyone Seen this Message Before "Configuration changes for domain saved to the repository."
I'm running into this situation where one of my WLS servers is generating the following
messages "Configuration changes for domain saved to the repository." This process
of saving to a repository is causing an issue on start-up. Typically my deployments
take 2-3 minutes on start-up. They are now taking 10 minutes. I've made no changes
to my application. I've been able to identify that this process of saving to a
repository is the main issue of contention....
Anyone know what the message means? Anyone know how to disable this message?This is just WebLogic writing back changes to config.xml, which it does from time
to time for reasons like:
- your app deployment has changed.
- you've reconfigured something in the console.
etc...
WebLogic just spins this off into a handy execute thread, so it would be surprising
if this was causing your app deployment to slow down (how do you know it is).
In my experience, slower than normal app deployments are usually down to:
- waiting for database connections.
- waiting for connecitons to other external resources.
Remember (in WLS6.x anyway) initialisation is done serially on the main thread,
so if something's slow, everything gets blocked behind it.
simon.
I'm running into this situation where one of my WLS servers is generatingthe following
messages "Configuration changes for domain saved to the repository."This process
of saving to a repository is causing an issue on start-up. Typicallymy deployments
take 2-3 minutes on start-up. They are now taking 10 minutes. I'vemade no changes
to my application. I've been able to identify that this process ofsaving to a
repository is the main issue of contention....
Anyone know what the message means? Anyone know how to disable thismessage? -
When I plug my ipod touch into the computer it just charges and won't appear on itunes!
when I plug my ipod touch into the computer it just charges and won't appear on itunes!
http://support.apple.com/kb/TS1538
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again.
Maybe you are looking for
-
ODAC1120230Beta_EntityFramework performance problem
At our company, we are working on a .NET 4.0 proof of concept project. We wanted to try Oracle’s ODP.NET with entity framework support. The project uses LINQ to entity framework. The databases selected are Oracle 10g and SQL server 2008. We are using
-
i am russian remuved itunes at all i wont instal folder C:/Program files/itunes what i must do
-
Does somebody can let me know anything?
-
E52 fw 031.012 3g data "connecting" icon always on...
Since the last update of my E52's firmware, the 3G connecting (not "connected") icon - which is the one with the dotted 2-way arrow under the signal meter - is always shown on the screen. I have no applications running in the background (as the task
-
Just a quick report to say my Epson 4490 Pro scanner works great with the latest Epson drivers, which I had already installed, Version 3.03A. Hope this helps.