SSIS package truncating fields only from certain machines

I created an SSIS package that fails based on one field being truncated, but ONLY if run from one particular workstation.
We have two VM Workstations, A and B, and the database server, C. The SSIS package takes data from an Excel file and loads it into a table on C/DataSources.
The package is located in a directory on B, but if I map the directory from A and run the package in a command line from A, the package runs fine with no errors.
If I run the package directly from B in a command line, it fails with errors. This is driving me crazy!!!!! Can anyone help???

The package errors out because it says the field was truncated....
The Excel file is the same on A and B because A and B are just workstations with SSMS
The packages are located in one place, the input files in another, and both
A and B map to the input files as a shared directory. The packages are local to B, and A maps to them as a shared directory.
There's really no reason it should be truncated when run from B and not from A when it's the same package.

Similar Messages

How to allow access only from certain IPs?

I have Portal Server 6.0 on Sun ONE Web Server and want to allow access to it only from certain IPs, i.e. if my IP differs from predefined, then access is denied (no page is opened).
How can I implement this with minimal efforts?
Thanks in advance!

Where did you set the ACLs?
When webclients connect direct to the portal/ids this is pretty straight forward using htttpacl files. When SRAP GW's are used for Internet portal access the web or app-server never sees the client IP thus those ACLs don't get applied.
Am I missing something (won't be the first time... or the last:-)
Cheers,
-psr

Restore specific iPhoto ALBUMS (only) from time machine

hi people,
I was wondering if there is a way to restore only specific albums from time machine. i did a fresh install in my laptop recently and dont want to dump 40gb of pics back on to it, but there are just a few albums i would like to restore. i googled for a while and kept winding up at the "restore library" result, or "restore individual pics" but not just the album. i would imagine iphoto would make a specific fold for said albums, but i cant seem to find it.
please help / thanks in advance!

LarryHN wrote:
Sorry but albums can not be restored - and you can not select them in the show package contents display - albums are simply entries in the iPhoto database and have no physical presence
Additionally showing package contents and entering the iPhoto library is extremely dangerous and a tiny user error can destroy the library and cause dataloss -- it is strongly recommended to never go into the inside of the iPhoto library and there never is a reason t do so
What you are doing is restoring the originals from an event losing any modifications and any metadata editing
And you are breaking a cardinal rule by making changes to the content of the iPhoto library using something other than iPhoto which will not work - photos muct be imported into iPhoto, not saved into its database
But the biggest problem with the OP's plan is that Time Machine is NOT an archival system but a backup system and eventually it will remove the oldest files so sooner or later the OP would lose their photos that had not been restored
LN
Agreed to a large extent, but I don't have anything in the Modified folder to try.
My albums appear in originals as folders. But as you say, they are the raw imports.
As to the wisdom of the procedure; it worked, and I was slightly surprised it did from within a package, but i accept your overall premise.

Mailbox to receive emails only from certain mail addresses with organisation

Hi
We are using exchange 2010 in our organisation. A user has requested to only receive emails from certain users within the organisation. And if any other users try to email then the email is bounced back. So in a nut shell only certaion
individuals can email him with the organisation.
Is there a cmdlet shell that can be used? Or is there anything that can be done in Exchange Console.

Hi,
You can create a transport rule to achieve this goal. Here is an example for your reference.
Note: 'reject' and '5.7.10' are custom rejection message and enhanced status code. You can change them to what you need.
Hope it helps.
Best regards,
Amy Wang
TechNet Community Support

Permitting user to choose value for a field only from F4

Hi all,
   I have the following requirement in table maintenance generator.
   There is a custom field in the Z table for which table maintenance is generated to which a search help is attached.
   Now in the maintenance screen(SM30) i get a F4 value help for this field and also user can input values in this field. But the requirement is that the user should be able to select values only from F4 and should not be able to input any values.List box is not accepted.
Thanks & Regards,
Shafiq

Hi Jon,
   Thank you once again. The issue is solved using the 'DYNP_VALUES_UPDATE' function module.
I will put the code here for others to refer.
****ON THE SCREEN FLOW LOGIC*****
PROCESS ON VALUE-REQUEST.
FIELD /rb05/wwr_cr_t-mvgr4 MODULE value. "Field on which F4 is required
****MODULE IMPLEMENTATION********
*& Include           /RB05/LYBW_WWRTTTI01
DATA:
    l_fldval            LIKE help_info-fldvalue,
    l_repid             LIKE sy-repid,
    l_repid1            LIKE d020s-prog,
    l_dynnr             LIKE sy-dynnr,
    l_dynnr1            LIKE d020s-dnum,
    lt_return           LIKE ddshretval OCCURS 1,
    ls_return           LIKE ddshretval,
    ls_dynpread         LIKE dynpread,
    lt_dynpread         LIKE dynpread OCCURS 1,
    cnt                 TYPE i VALUE 0.
MODULE value INPUT
MODULE value INPUT.
    GET CURSOR LINE cnt.
    l_repid = sy-repid.
    l_dynnr = sy-dynnr.
    l_repid1 = sy-repid.
    l_dynnr1 = sy-dynnr.
    CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
      EXPORTING
        tabname           = space
        fieldname         = space
        searchhelp        = '/B05/OWWRW58'
        shlpparam         = '/B05/S_WWRW58'
        dynpprog          = l_repid
        dynpnr            = l_dynnr
        dynprofield       = '/RB05/WWR_CR_T-MVGR4'
        stepl             = 0
        value             = l_fldval
        display           = 'F'   "Force
      TABLES
        return_tab        = lt_return
      EXCEPTIONS
        field_not_found   = 1
        no_help_for_field = 2
        inconsistent_help = 3
        no_values_found   = 4
        OTHERS            = 5.
    IF NOT sy-subrc IS INITIAL.
      MESSAGE s398(00) WITH 'Call to Searchhelp failed'
        space space space.
      EXIT.
    ENDIF.
    CLEAR : ls_dynpread, lt_dynpread, ls_return.
    BREAK-POINT.
    READ TABLE lt_return INTO ls_return WITH KEY retfield = '/RB05/WWR_CR_T-MVGR4'.
    IF sy-subrc EQ 0.
      ls_dynpread-fieldname = '/RB05/WWR_CR_T-MVGR4'.
      ls_dynpread-stepl      = cnt.
      ls_dynpread-fieldvalue = ls_return-fieldval.
      APPEND ls_dynpread TO lt_dynpread.
    ENDIF.
    READ TABLE lt_return INTO ls_return WITH KEY retfield = 'TXTSH'.   "Filling the related field
    IF sy-subrc EQ 0.
      ls_dynpread-fieldname = '/RB05/WWR_CR_T-GB'.
      ls_dynpread-stepl      = cnt.
      ls_dynpread-fieldvalue = ls_return-fieldval.
      APPEND ls_dynpread TO lt_dynpread.
      CALL FUNCTION 'DYNP_VALUES_UPDATE'
        EXPORTING
          dyname               = l_repid1
          dynumb               = l_dynnr1
        TABLES
          dynpfields           = lt_dynpread
        EXCEPTIONS
          invalid_abapworkarea = 1
          invalid_dynprofield = 2
          invalid_dynproname   = 3
          invalid_dynpronummer = 4
          invalid_request      = 5
          no_fielddescription = 6
          undefind_error       = 7
          OTHERS               = 8.
    ENDIF.
ENDMODULE.                    "value INPUT
P.S: Points alloted.
Message was edited by:
        Shafiq

Can't print "Form Fields Only" from newly-installed Acrobat Reader XI

I have created numerous forms for our agency on which our employees used (in previous versions of Acrobat Reader) the "Form Fields Only" print function. We finally got the boss to give us the OK to upgrade to Acrobat XI Pro for me, and Acrobat Reader XI for the employees. However, they open the same forms we've been using and find that they no longer have the menu option to choose "Form Fields Only" for printing purposes. I would be very grateful to anyone who might be able to steer me in the right direction as to how I resolve this issue. Unfortunately, the job does not afford me a lot of time for research and "playing" with new software, and we need to have these forms work for us by Thursday. Help, please! And Merry Christmas to everyone!

One possible workaround is to export the form data and then import it into a "blank" version of the same file, that has only the form fields. This would require using a script to export and import the data, and to create that additional version of the file for printing purposes.
Or you can put the file's contents on a non-printable layer when creating it...

New hard drive - how to import iTunes and Mail only from Time Machine backup

Hi
I am installing a new boot drive into my MacPro. When I do this, I only want to copy over initially Mail and iTunes as previously backed up in Time Machine.
Is there an simple way to do this without a complete copy of my last Lion install going on the new drive?
Thanks in advance.
Matt

The music sync is one way - computer to ipod. The only exception is itunes purchases.
Copy everything from your backup copy of your computer.

How do i create an ssis package that transforms data from a text file?

I have a text file with data that in the following format; i want this data in columns with the appropriate heading. Any ideas??
Name – Tony
Married – 2 children (Girl:3, Boy:1)
AddressLine1: 10 Sunnhill Ave
AddressLine2: Streatham
AddressLine3: London
PostCode: SW18 7NN
Name – Sarah
Married – 2 children (Girl:3, Boy:1)
AddressLine1: 10 High St
AddressLine2: Streatham
AddressLine3: London
PostCode: TW18 7NN
Name – Tom
Married – 2 children (Girl:3, Boy:1)
AddressLine1: 10 Bridge Ave
AddressLine2: Hammersmith
AddressLine3: London
PostCode: TF20 8HN
sukai

I don't see how you're going to pivot that using SSIS. I happen to know VBA pretty well, and I'll give you this Macro, which should do what you want.
Sub CombineRows()
lastRow = Range("A" & Rows.Count).End(xlUp).Row
'set rowcount to row where you want 1st entry
RowCount = 1
NewRow = RowCount
Start = False
Do While RowCount <= lastRow
If Start = False Then
If Range("A" & RowCount) <> "" Then
Start = True
StartRow = RowCount
End If
Else
If Range("A" & (RowCount + 1)) = "" Then
ColCount = 1
For MoveRow = StartRow To RowCount
Cells(NewRow, ColCount) = Cells(MoveRow, "A")
ColCount = ColCount + 1
Next MoveRow
NewRow = NewRow + 1
Start = False
End If
End If
RowCount = RowCount + 1
Loop
Rows(NewRow & ":" & lastRow).Delete
End Sub
Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.

Restoring files ONLY from Time Machine on a clean install of Leopard

Hi folks. I've seen variations of this asked but not quite the answer I'm looking for.
I want to do a clean install of Leopard and want to restore only files from a TM backup (mp3's, photos, docs, etc.). I don't want to incorporate apps, system files or the user account from the TM backup. Just a fresh installation of OS X on which I can incorporate my files from a TM backup without having to worry about incorporating unwanted programs, hidden files and whatnot. I used to do this on Windows all the time but can't figure out a way of doing it on OS X. Thanks in advance for your suggestions!
Jim

j_kanaris wrote:
What's user ID 501? So if I'm trying to import files from a TM backup and I have the same user ID, I won't be prompted to change it based on this method?
you won't be prompted to change user ID but if the user IDs are different you'll be denied access to some folders (like the Documents folder) in your old home directory and won't be able to restore them. I presume the files you want to restore are there? this issue can be dealt with if it does arise but as I said if you only have one user on both computers this will not be an issue. just try it and see what happens.
Message was edited by: V.K.
Message was edited by: V.K.

Restore Lion Server Postgres database only from Time Machine Backup

I just transferred our server from one box to another, and in the process, seem to have dumped our Postgres Caldav database, but not to a file, so it's gone. I know have no calendars and no way to access them. I do have a recent Time Machine backup of the server, but am not sure how to get my calendar data back so I can properly export it. Honestly, I'm not that sure how to properly export it either once I have it back. I'm afraid the previous postgres dump command I use will just do the same thing. Anyone have experience in the matter? Thanks!

I was helping you out with this in a thread last week: https://discussions.apple.com/thread/3890595
In that thread I pointed you to Charle Edge's blog at Krypted where he goes into detail how to backup and restore your iCal database. I also told you this in my instructions:
These instructions assume that you have a backup of your caldav database sitting on your desktop, and it's called 'caldav.sql'.
So you we're supposed to make a backup of your database as the first thing that you do. dropdb wipes out your database completely, it doesn't restore it. You were supposed to make a backup of it first (instructions for this were at the link I gave you to Krypted).
Did you make a full backup of your server before you ran this command?

Allow starting applet only from certain webpages

Hello,
I'm programming an application where Client is based on applet which communicates with servlet on the server side. I will place the applet on two webpages:
1. www.mywebpage.com
2. www.otherpage.com
I would like to restrict the access to this applet so that it is accesible only via those webpages. I would like to prevent others from just copy and paste the link in the browser.. or placing the link on other webpages.
Is this possible to do such thing? ..
or I would have to implement some authorisation -> user enters username and password obtained from one of my webpage <- of course this is not ideal solution... the password and user name can be just remebered by the user and he would not have a need to visit my pages again to start the applet... moreover I would like to avoid user/password autorisation.. and allow the applet to be accesed by anyone but only by clicking on the link on one of my websites.
I would also appriciate any comments regarding technical aspects of security:
1. I guess it is not a problem to establish HTTPS connection between applet and servlet
2. Should the applet be signed... I'm asking because I've heard that there is a possibility to inject a trojan horse through not signed applets <- is it true? and how this can technically be possible?
Edited by: walkeros on Mar 11, 2008 2:46 AM

To merely stop copy and paste of the link, you could check the expression:
java.util.Arrays.asList(
"www.mywebpage.com",
"www.otherpage.com"
).contains(applet.getDocumentBase().getHost())It is guaranteed that there is a https handler for java.net.URL.
To demonstrate that your web page is really your web page use https with a genuine recognised certificate. Signing your applet will not help. In general, follow the principle of least privilege.

Excel Connection Manager suddenly can no longer connect to Excel from SSIS package

During the last 3 months, I used 32 bit SSIS 2008 (v 10.50.2500.0) on an WinXp machine (v 5.1.2600 SP3 Build 2600) to create a package that writes multiple query results (reports) to an excel spreadsheet. Each report is written to a different
tabbed sheet in the same spreadsheet. The package was working just fine until May 9 2013, when suddenly every single Data Flow task with an Excel Destination displayed error icons and raised the following
error message when opening the Advanced Editor:SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005 Description: "Unspecified error". Error at <DataFlow task name>: SSIS
error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager <Excel connection Manager> failed with error code 0xC0202009. There may be error messages posted before this with more
information on why the Acquire Connection method call failed. Exception from HRESULT: 0Xc020801c (Microsoft.SQlServer.DTSPipelineWrap)Originally the error message reported that the Error Code was "0x8000FFFF", but I can't seem
to reproduce that error code since. Now I am only getting the above error message.From the time I created the original package (when it worked fine) until now, I have been using the same computer, writing to a (32 bit) 2010 Excel file in
a local folder. The filename and location have not changed. The ConnectionString has not changed. The Connnection String I am using is Provider=Microsoft.ACE.OLEDB.12.0;Data Source=C:\Conversion\Conversion Results_dt01.xlsx;Extended Properties="EXCEL
12.0 XML;HDR=YES;". Now an attempt to create and test a NEW Connection Manager yields me this error. "Test connection failed because of an error in initializing provider. Unspecified error.",  whereas before I had
no problems creating a new connection manager.I checked a second SSIS package, which I also built during the past 3 months, which loads multiple sheets from multiple Excel files to a SQL Server 2008 database holding table. It uses the same
ACE OLE DB 12.0 connection to load the Excel speadsheets and this package continues to work fine on the same workstation.In desparation, wondering if the Microsoft ACE OLE DB 12.0 driver had become corrupt (even though the second package
was raising no errors), I did download and install the Microsoft ACE OLE DB 12.0 driver.  That did not solve my problems with the first package.I need to get this package running again ASAP as it is targeted for UAT testing in a
matter of days. Any help with this issue would be greatly appreciated!

I submitted this issue above and now I am having the same problem again. I am using the same local computer, the same operating system (WinXp v 5.1.2600 SP3 Build 2600) as originally described. I am working with the same SSIS package that
writes multiple query results (reports) to an excel spreadsheet. This package has been successfully executed multiple times, but now I am suddenly getting the same error as follows:
Error at 1ConversionContacts [Connection manager "Excel Connection Manager"]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft Access Database Engine" Hresult: 0x80004005 Description: "Unspecified error".
Error at DFlow Write soft deleted duplicate claims to Excel sheet [Excel Destination - write duplicate claim nbrs that have been removed to Excel [61]]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method
call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
The package will not run because of these multiple errors (multiple because it occurs on every single excel destination in the package).
I have Run64BitRuntime set to false on the project. I have triple checked that the excel file name (which I created and can access) exists with the correct name in the correct path, which is local on my machine. The file is the same file in the same
location as when the package worked. I am running the SSIS service under my own network login, as I was when the package worked. I have been consistently getting this same error whenever I change my network password without updating the password
in the SSIS service, but I have triple verified that the service is using my latest password. If I try to open and edit the Excel Destination in any DataFlow task I get the same error. I can successfully create a new Excel Connection Manager pointing
to the same excel file. However if I try to assign the newly created Excel Connection Manager in the data flow, I cannot activate the drop down to choose the Excel sheet without getting an 'Unspecified error' message. I then swapped out
the file with its template version, and ensured the name was updated as correct. I still get the same errors.
Oh, and the SSIS package is extracting data from a SQL Server 2008 database with an ADO.net Connection Manager using Windows authentication. I have no problems with the SQL Server connection, it has always worked and still does. It is only
the connection to excel output file which is locally stored on my machine.
Has anyone got any suggestions for me?

Error executing SSIS packages from Agent

Hi All,
     I designed SSIS package that loads data from Oracle table to SQl server table along with loading data into Diension and fact tables using SSIS packages only. First I created all SSIS packages that loads data into Staging tables from
Oracle table in next level loading data into Dimension table and final level is loading data into Fact table. At lasts I created One master package there I'm calling all packages (Execute package task) differently.
Configuration type: Parent package configuration for All child packages. XML config for parent package.
When I execute SSIS package from BIDS data is loading up to Fact table. When I execute SSIS packages through Sql server agent ( Using File System Deployment)When I execute SSIS package from Sql server agent it is throwing an error message like
Message
Executed as user: . Microsoft (R) SQL Server Execute Package Utility Version 11.0.2100.60 for 32-bit Copyright (C) Microsoft Corporation. All rights reserved.    Started: 10:45:10 PM Error: 2013-10-17 22:45:12.60
Code: 0xC00220E6     Source: Master Data      Description: There is no project to reference. End Error Error: 2013-10-17 22:45:12.61     Code: 0xC0024107     Source:
Master Data      Description: There were errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 10:45:10 PM Finished: 10:45:13 PM Elapsed:
2.59 seconds. The package execution failed. The step failed.
I'm uploaded config file also while at the time of scheduling job.
Regards,
Praveen
Regards, Praveen

Hi Praveen,
The issue may occur if the SQL Server Agent Service Account or Proxy account doesn’t have sufficient permissions. Please create a SQL Server Agent Proxy account that has the permissions to execute the package and perform update operations on the SQL Server
fact tables.
Reference:
http://technet.microsoft.com/en-us/library/ms175834.aspx
Regards,
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Running SSIS Package from another server and performance

I've built an SSIS package that integrates data from one SQL Server 2008 database to another SQL Server 2008 database. However, since I needed to leverage some SSIS 2012 components, I've installed the package on another SQL Server 2012 in the network.
Is there a performance hit (positive or negative) if I run a SSIS package on a SQL Server that isn't the source or destination server?

Hi,
we cannot tell for sure. It depends on so many things, amount of data to be transferred, processing needs to be done, overall capacity of the server, workloads that can be handleld by the servers, etc. The mos important aspect but nt the only one is the
amount of data to be access / tranformed / processed / transmitted to the destination.
This is a typical case for a test done representative amount of data in a load test on your side.
-Jens
Jens K. Suessmeyer http://blogs.msdn.com/Jenss

When migrating ssis packages from 2005 to 2012 Activex Script Task component doesn't exist in 2012 version

Hello,
We are migrating the ssis packages from 2005 to 2012.
I'm unable to convert Activex Script Task from 2005 vesrsion to 2012 because in 2012 version Activex Script Task doesn't exist.
Can anyone please let me know what is the alternative way to convert Activex Script Task from 2005 vesrsion to 2012?

Hi Vinay9738,
Have you tried to upgrade the SSIS 2005 packages to SSIS 2012 packages by using the SSIS Package Upgrade wizard? In certain cases, ActiveX script in SSIS won’t work and we need to either modify the script or replace the ActiveX Script with stock SSIS
tasks. You can find the mapping between some most common patterns used in DTS ActiveX Script and SSIS native tasks from the following link:
http://help.pragmaticworks.com/dtsxchange/scr/ActiveX%20Script%20Task.htm
Here is also a useful link about how to convert ADODB object of ActiveX Script to SSIS tasks:
http://help.pragmaticworks.com/dtsxchange/scr/FAQ%20-%20How%20to%20convert%20ADODB%20object%20of%20ActiveX%20Script%20to%20native%20SSIS%20Task.htm
Regards,
Mike Yin
TechNet Community Support

SSIS package truncating fields only from certain machines

Similar Messages

Maybe you are looking for