SSIS.Pipeline : Warning: Could not open global shared memory to communicate with performance DLL
I am getting the following warning for my SSIS08 package:
Could not open global shared memory to communicate with performance DLL; data flow performance counters are not available. To resolve, run this package as an administrator, or on the system's console.
I did check Warning in SSIS 2008 , but didn't find any solution.
The package processes data and executes fine , but why do I see this warning? When I run this package on my machine, I see no such warning, it's only when I deploy it to our DEV SSIS server, I get this warning.
Thanks,
Sonal
I am getting the following warning for my SSIS08 package:
Could not open global shared memory to communicate with performance DLL; data flow performance counters are not available. To resolve, run this package as an administrator, or on the system's console.
I did check
Warning in SSIS 2008 , but didn't find any solution.
The package processes data and executes fine , but why do I see this warning? When I run this package on my machine, I see no such warning, it's only when I deploy it to our DEV SSIS server, I get this warning.
Thanks,
Sonal
You have to include the account you use to execute the package in the performance counters group.
SSIS Tasks Components Scripts Services | http://www.cozyroc.com/
Could you tell me where is "performance counters" group, I can not find it.
Thanks !
Similar Messages
-
Hi All,
I am running an SSIS solution that runs 5 packages in sequence. Only one package fails because of the error:
[SSIS.Pipeline] Warning: Warning: Could not open global shared memory to communicate with performance DLL; data flow performance counters are not available. To resolve, run this package as an administrator, or on the system's console.
I have added myself to the performance counters group.
I am running windows 7 with SSIS 2008.
Any ideas would be appreciated. I have read that some have disabled the warning, but I cannot figure out how to disable a warning.
Thanks.
IvanHi Ivan,
A package would not fail due the warning itself, speaking of which means the account executing it is not privileged to load the Perf counters, and should thus be safely ignored.
To fix visit: http://support.microsoft.com/kb/2496375/en-us
So, the package either has an error or it actually runs.
Arthur My Blog -
[JRockit] WARNING: could not open Unknown thread system flavour for reading
[JRockit] WARNING: could not open Unknown thread system flavour for reading, per-thread CPU usage can't be measured.
What are the reason of this warning?
Can I ignore this warning?
My system is: SLES9 SP3
(2.6.5-7.276.PTF.196309.1-bigsmp)
Pagesize = 1 075 080 972Which version of JRockit (java -version) ? Do you have LD_ASSUME_KERNEL set?
/Staffan -
GLUT: Fatal Error in gloss: could not open display:
Hi, I'm trying to log into one of the other macs in my office and run a program I wrote in openGL (in c). I ssh -X into the machine, but then when I try to run the program, I get an error that it could not open a display. It happens with simple test demo programs in Mesa. Can someone help me figure out how to get a display. These things confuse me very much. I'm going to need to do this when I ssh in from home and need to open the graphics program. Also, I'm going to need to do this when I ssh in to other machines around the lab. I don't know what is different about this between macs and linux. On linux I've had to type xhost + before, but that's always solved it. Any suggestions?
Thanks in Advance,
Sean =)Yes thank you for your response.
And my replicat is in Windows server2008
and am using mysql2012
here is my replicat param file
replicat RBCNR
targetdb ATSTGT_2012 userid atstgt, password atstgt
sourcedefs ./dirdef/ORACLEbasicExtPumpReplicatCR.def
gettruncates
discardfile ./dirrpt/RBCNR.dsc, purge
BATCHSQL
reportcount every 1000 records, rate
map qasource.basicExtPumpReplicatCR_MRK, target atstgt.basicExtPumpReplicatCR_MRK;
and my extracts running well.
But the replicat is ab bending due to it can't find the sourcedef file -
Could Not Open Handler Error Message
Any suggestions on what to do after receiving the "could not open handler. system memory is probably very low" error message.
The weird thing is the project I was working on worked fine, never receiving that message. Then, I returned to the project after a two week break and now I receive that message.
Any help would be greatly appreciated.David, Thanks for the reply.
I'm guessing by project details you're asking about DV/HDV etc etc.
The project is a play/show that was taped from two cameras each about 2hrs long. In addition, there are over 7 hrs of behind the scenes footage. The show is shot in regular DV, and the behind the scenes footage is in DV but has 4:3 and 16:9 footage intermixed. I've edited the show sequence, the behind the scenes sequence, a gag reel sequence, and a slideshow sequence.
I'm doing all this on a MacPro 3.0 GHz Dual-Core Xeon 4GB Ram.
If there is more information needed please let me know. Thanks for your patience, first time you know
David -
I am not able to open my Photoshop CS5 files due to the following warning, "Could not complete your request because an unexpected end-of-file was encountered". Please help!
That could be caused by truly damaged file/s.
What format?
How did you create or get the file/s? -
OAF : Could not open PDF from Self Service Page or Jdeveloper.
Hi Friends,
We are on R12 Applications.
Appreciate any help.
Requirement :
1. Open the PDF from Self Service Page.
Error :
Adobe Reader Could Not Open the PDF because it is either not a supported file type or the file is damaged.
Below is my Controller and AM code
======================
Controller Code
==========
/*===========================================================================+
| Copyright (c) 2001, 2005 Oracle Corporation, Redwood Shores, CA, USA |
| All rights reserved. |
+===========================================================================+
| HISTORY |
+===========================================================================*/
package XXX.oracle.apps.ak.xml.webui;
import oracle.apps.fnd.common.VersionInfo;
import oracle.apps.fnd.framework.webui.OAControllerImpl;
import oracle.apps.fnd.framework.webui.OAPageContext;
import oracle.apps.fnd.framework.webui.beans.OAWebBean;
import oracle.apps.fnd.common.VersionInfo;
import oracle.apps.fnd.framework.webui.OAControllerImpl;
import oracle.apps.fnd.framework.webui.OAPageContext;
import oracle.apps.fnd.framework.webui.beans.OAWebBean;
import oracle.apps.fnd.framework.server.OAApplicationModuleImpl;
import oracle.xml.parser.v2.XMLNode;
import java.io.ByteArrayInputStream;
import java.io.ByteArrayOutputStream;
import javax.servlet.ServletOutputStream;
import javax.servlet.http.HttpServletResponse;
import oracle.apps.fnd.framework.OAException;
import oracle.apps.fnd.framework.server.OADBTransactionImpl;
import oracle.apps.xdo.XDOException;
import oracle.apps.xdo.oa.schema.server.TemplateHelper;
import oracle.cabo.ui.data.DataObject;
import oracle.jbo.XMLInterface;
* Controller for ...
public class XMLIntegrationCO extends OAControllerImpl
public static final String RCS_ID="$Header$";
public static final boolean RCS_ID_RECORDED =
VersionInfo.recordClassVersion(RCS_ID, "%packagename%");
public static final int DEPTH = 4;
public static final int APP_ID = 20003;
public static final String APP_NAME = "XBOL";
public static final String TEMPLATE_CODE ="Emp_Template";
public static final int BUFFER_SIZE = 32000;
* Layout and page setup logic for a region.
* @param pageContext the current OA page context
* @param webBean the web bean corresponding to the region
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
OAApplicationModuleImpl am= (OAApplicationModuleImpl)pageContext.getApplicationModule(webBean);
am.invokeMethod("initEmpVO");
am.invokeMethod("getEmpDataXML");
* Procedure to handle form submissions for form elements in
* a region.
* @param pageContext the current OA page context
* @param webBean the web bean corresponding to the region
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
super.processFormRequest(pageContext, webBean);
OAApplicationModuleImpl am= (OAApplicationModuleImpl)pageContext.getApplicationModule(webBean);
String event = pageContext.getParameter("event");
System.out.println("XXX : Event "+event);
if("GenerateReport".equals(event))
// Get the HttpServletResponse object from the PageContext. The report output is written to HttpServletResponse.
DataObject sessionDictionary = (DataObject)pageContext.getNamedDataObject("_SessionParameters");
HttpServletResponse response = (HttpServletResponse)sessionDictionary.selectValue(null,"HttpServletResponse");
try {
ServletOutputStream os = response.getOutputStream();
// Set the Output Report File Name and Content Type
String contentDisposition = "attachment;filename=EmpReport.pdf";
response.setHeader("Content-Disposition",contentDisposition);
response.setContentType("application/PDF");
// Get the Data XML File as the XMLNode
XMLNode xmlNode = (XMLNode) am.invokeMethod("getEmpDataXML");
ByteArrayOutputStream outputStream = new ByteArrayOutputStream();
xmlNode.print(outputStream);
ByteArrayInputStream inputStream = new ByteArrayInputStream(outputStream.toByteArray());
ByteArrayOutputStream pdfFile = new ByteArrayOutputStream();
//Generate the PDF Report.
TemplateHelper.processTemplate(
((OADBTransactionImpl)pageContext.getApplicationModule(webBean).getOADBTransaction()).getAppsContext(),
APP_NAME,
TEMPLATE_CODE,
((OADBTransactionImpl)pageContext.getApplicationModule(webBean).getOADBTransaction()).getUserLocale().getLanguage(),
((OADBTransactionImpl)pageContext.getApplicationModule(webBean).getOADBTransaction()).getUserLocale().getCountry(),
inputStream,
TemplateHelper.OUTPUT_TYPE_PDF,
null,
pdfFile);
// Write the PDF Report to the HttpServletResponse object and flush.
byte[] b = pdfFile.toByteArray();
response.setContentLength(b.length);
os.write(b, 0, b.length);
os.flush();
os.close();
catch(Exception e)
response.setContentType("text/html");
throw new OAException(e.getMessage(), OAException.ERROR);
pageContext.setDocumentRendered(true);
AM CODE
======
package subba.oracle.apps.ak.xml.server;
import java.io.ByteArrayOutputStream;
import oracle.apps.fnd.common.MessageToken;
import oracle.apps.fnd.framework.OAException;
import oracle.apps.fnd.framework.OAViewObject;
import oracle.apps.fnd.framework.server.OAApplicationModuleImpl;
import oracle.apps.fnd.framework.test.inputscanner.server.EmpVOImpl;
import oracle.help.common.xml.*;
import oracle.jbo.XMLInterface;
import oracle.xml.parser.v2.XMLDocument;
import oracle.xml.parser.v2.XMLElement;
import oracle.xml.parser.v2.XMLNode;
// --- File generated by Oracle ADF Business Components Design Time.
// --- Custom code may be added to this class.
// --- Warning: Do not modify method signatures of generated methods.
public class testXMLAMImpl extends OAApplicationModuleImpl {
/**This is the default constructor (do not remove)
public testXMLAMImpl() {
/**Sample main for debugging Business Components code using the tester.
public static void main(String[] args) {
launchTester("XXX.oracle.apps.ak.xml.server", /* package name */
"testXMLAMLocal" /* Configuration Name */);
public void initEmpVO()
EmployeeVOImpl vo = getEmployeeVO1();
if(vo == null)
MessageToken errTokens[] = {
new MessageToken("OBJECT_NAME", "EmployeeVO1")
throw new OAException("AK", "FWK_TBX_OBJECT_NOT_FOUND", errTokens);
} else
vo.executeQuery();
public void getEmpDataXML()
try {
ByteArrayOutputStream outputStream = new ByteArrayOutputStream();
OAViewObject vo = (OAViewObject)findViewObject("EmployeeVO1");
((XMLNode) vo.writeXML(4, XMLInterface.XML_OPT_ALL_ROWS)).print(outputStream);
System.out.println(outputStream.toString());
catch(Exception e)
throw new OAException (e.getMessage());
/**Container's getter for EmployeeVO1
public EmployeeVOImpl getEmployeeVO1() {
return (EmployeeVOImpl)findViewObject("EmployeeVO1");
}Try the OA Framework Forum
-
Named Pipes Provider: Could not open a connection to SQL Server
We are running into an error on a SQL request from SQL-IDA to the SQL-IDB server. Both servers are on Windows 2005 with MS SQL Server 2003 SP3.
OLE DB provider "SQL-IDA" for linked server "SQL-IDB" returned message "Login timeout
expired".
OLE DB provider "SQL-IDA" for linked server "SQL-IDB" returned message "An error has
occurred while establishing a connection to the server. When connecting to SQL Server 2005,
this failure may be caused by the fact that under the default settings SQL Server does not
allow remote connections.".
Msg 53, Level 16, State 1, Line 0
Named Pipes Provider: Could not open a connection to SQL Server [53].
It seems to suggest that SQL-IDA cannot find the network path to SQL-IDB. We've followed the steps in this article http://support.microsoft.com/default.aspx?scid=kb;EN-US;914277 but it did not resolve our issue. Is it possible that the MSDTC dynamic port range
should be set to a specific range on both servers?
Any help is greatly appreciated.
AlbertHi Albert,
Can you try to use the SQL Server Management Studio on server ‘SQL-IDA’ to connect to the instance on server ‘SQL-IDB’ to see if it works or not?
There are possible reasons to error 53:
a) typo in the server name, or using "/" rather than "\" between server name and instance name, e.g. "myserver/myinst" is not correct.
b) name resolution to the server name is not correct, "ping -a yourserver" would tell if that's the case
c) The server machine is firewall'ed and file sharing is not in the exception list. You need put "File and Printer Sharing" in exception.
For more information:
Named Pipes Provider, error: 40 - Could not open a connection to SQL Server (Microsoft SQL Server, Error: XXX).
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Stephanie Lv
TechNet Community Support -
I have a MacBook pro version 10.6.7 with snow leopard. After an scheduled software upgrade I could not open Quicken (It said it could not open the files). Now I can only open it if I have my external drive on. Can you help?
All the information that I had input on Quicken is gone. I have to have the external hard drive that I use to back up to be able to use quicken now. It is as if it was erased from the laptop hardriveTry repairing permissions. My favorite way is with a utility called AppleJack. Info and download here. It's free. It only works when you boot in Single User Mode. When restarting or booting, hold down the Command key and S keys.
You will get a very different startup screen that looks like the Terminal app has hijacked the screen. Just let the lines of text scroll by. When that happens you will get a text entry prompt. Type in "AppleJack" without the quotation marks.
A DOS looking menu will appear. Choose 1 or d to run Disk Repair. If you get a message that Disk Repair found and corrected errors, run it again. Repeat until you get the "your disk appears to be ok" message. This rarely happens with my experience, though. This does the same thing as as booting from an external drive and running Disk Utility's repair. Only, no external drive is required!
Next, choose 2 or p to repair disk permissions. This will take a little while. AppleJack warns that it will take up to an half hour to run repair permissions. It'n never taken more than about ten minutes for my MacBook Pro.
As permissions are repaired, you will see each repair scroll on the screen. When done, the menu returns, choose q to quit. Then at the prompt, enter "exit" without the quotes. Your MacBook Pro should restart into Mac OS normally after this.
Hope this helps. -
Could not open DVD with libdvdcss
I installed vlc, xine-lib, xine-ui, mplayer, libdvdcss, libdvdnav, libdvdread.
I also installed "codecs" with packer.
I'm trying to play two different DVDs and the following is what I get (even putting the disk into /dev/sr0 or using another DVD won't change):
$ vlc /dev/sr1
VLC media player 2.1.5 Rincewind (revision 2.1.4-49-gdab6cb5)
[0x95b1220] pulse audio output error: PulseAudio server connection failure: Connection refused
[0x952a8f8] main libvlc: VLC wird mit dem Standard-Interface ausgeführt. Benutzen Sie 'cvlc', um VLC ohne Interface zu verwenden.
libdvdnav: Using dvdnav version 4.2.1
libdvdread: Could not open /dev/sr1 with libdvdcss.
libdvdread: Can't open /dev/sr1 for reading
libdvdnav: vm: failed to open/read the DVD
[0xb20a5e48] filesystem access error: read error: Input/output error
[0xb39a6e10] main stream error: cannot pre fill buffer
libdvdnav: Using dvdnav version 4.2.1
libdvdread: Could not open /dev/sr1 with libdvdcss.
libdvdread: Can't open /dev/sr1 for reading
libdvdnav: vm: failed to open/read the DVD
libdvdread: Could not open /dev/sr1 with libdvdcss.
libdvdread: Can't open /dev/sr1 for reading
[0xb1abe3f8] dvdread demux error: DVDRead cannot open source: /dev/sr1
[0xb5a03700] main input error: open of `dvd:///dev/sr1' failed
$ mplayer /dev/sr1
MPlayer SVN-r37224 (C) 2000-2014 MPlayer Team
210 audio & 441 video codecs
Playing /dev/sr1.
File not found: '/dev/sr1'
Failed to open /dev/sr1.
Exiting... (End of file)
$ xine /dev/sr1
Dies ist xine (X11 gui) - Ein freier Video-Player v0.99.8-[DEBUG].
(c) 2000-2010 The xine Team.
videowin: display is using xinerama with 1 screens
videowin: going to assume we are using the first screen.
videowin: size of the first screen is 1024x768.
videowin: Xinerama fullscreen parameters: X_origin=0 Y_origin=0 Width=1024 Height=768
pixel_aspect: 0.997627
Failed to open VDPAU backend libvdpau_nouveau_vieux.so: Kann die Shared-Object-Datei nicht öffnen: Datei oder Verzeichnis nicht gefunden
vo_vdpau: Can't create vdp device : No vdpau implementation.
xv_set_property: property=1, value=0
xine: could not connect to socket
xine: Datei oder Verzeichnis nicht gefunden
this is my video card
01:00.0 VGA compatible controller: NVIDIA Corporation NV11 [GeForce2 MX200] (rev b2) (prog-if 00 [VGA controller])
Subsystem: CardExpert Technology Device 0001
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16
Memory at d6000000 (32-bit, non-prefetchable) [size=16M]
Memory at d8000000 (32-bit, prefetchable) [size=128M]
Expansion ROM at d7ff0000 [disabled] [size=64K]
Capabilities: [60] Power Management version 2
Capabilities: [44] AGP version 2.0
Kernel driver in use: nouveau
Kernel modules: nouveau
these commands were asked me on freenode's #archlinux channel:
$ stat /dev/sr0
Datei: „/dev/sr0“
Größe: 0 Blöcke: 0 EA Block: 4096 blockorientierte Spezialdatei
Gerät: 5h/5d Inode: 6351 Verknüpfungen: 1 Gerätetyp: b,0
Zugriff: (0660/brw-rw----) Uid: ( 0/ root) Gid: ( 93/ optical)
Zugriff : 2014-07-12 22:52:20.959057344 +0200
Modifiziert: 2014-07-12 22:52:20.959057344 +0200
Geändert : 2014-07-12 22:52:20.959057344 +0200
Geburt : -
$ getfacl /dev/sr0
# file: dev/sr0
# owner: root
# group: optical
user::rw-
user:christian:rw-
group::rw-
mask::rw-
other::---
$ loginctl show-session $XDG_SESSION_ID -p Active
Active=yes
I feel like some other driver is missing...
Last edited by leonixyz (2014-07-12 21:58:01)dodo3773 wrote:Can you test a regular video file and it works fine in vlc?
ok, one step toward the solution:
I've scp-ed an .mp4 and an .mpg from my laptop, chmod 777 them and finally I can play them
dodo3773 wrote:
Also, do you get any output from this command?:
dmesg | grep CD
$ dmesg | grep CD
[ 1.227637] scsi 0:0:0:0: CD-ROM HL-DT-ST CD-RW GCE-8320B 1.02 PQ: 0 ANSI: 5
[ 1.238061] scsi 0:0:1:0: CD-ROM LG DVD-ROM DRD8160B 1.01 PQ: 0 ANSI: 5
[ 1.458996] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.459461] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.471069] sr 0:0:1:0: Attached scsi CD-ROM sr1
[ 1286.396790] sr 0:0:1:0: [sr1] CDB:
[ 1286.426850] sr 0:0:1:0: [sr1] CDB:
$ pacman -Qi vlc
Name : vlc
Version : 2.1.5-1
Beschreibung : A multi-platform MPEG, VCD/DVD, and DivX player
Architektur : i686
URL : http://www.videolan.org/vlc/
Lizenzen : LGPL2.1 GPL2
Gruppen : Nichts
Stellt bereit : Nichts
Hängt ab von : a52dec libdvbpsi libxpm libdca qt4 libproxy sdl_image libdvdnav libtiger
lua libmatroska zvbi taglib libmpcdec ffmpeg faad2 libupnp libshout libmad
libmpeg2 xcb-util-keysyms libtar libxinerama
Optionale Abhängigkeiten: avahi: for service discovery using bonjour protocol[Installiert]
libnotify: for notification plugin[Installiert]
ncurses: for ncurses interface support[Installiert]
libdvdcss: for decoding encrypted DVDs[Installiert]
lirc-utils: for lirc plugin[Installiert]
libavc1394: for devices using the 1394ta AV/C
libdc1394: for IEEE 1394 plugin
kdelibs: KDE Solid hardware integration
libva-vdpau-driver: vdpau back-end for nvidia[Installiert]
libva-intel-driver: back-end for intel cards
libbluray: for Blu-Ray support[Installiert]
flac: for Free Lossless Audio Codec plugin[Installiert]
portaudio: for portaudio support
twolame: for TwoLAME mpeg2 encoder plugin
projectm: for ProjectM visualisation plugin
libcaca: for colored ASCII art video output[Installiert]
libgme: for libgme plugin
librsvg: for SVG plugin[Installiert]
gnome-vfs: for GNOME Virtual File System support
libgoom2: for libgoom plugin
vcdimager: navigate VCD with libvcdinfo
aalib: for ASCII art plugin[Installiert]
libmtp: for MTP devices support
smbclient: for SMB access plugin[Installiert]
libcdio: for audio CD playback support[Installiert]
ttf-freefont: for subtitle font
ttf-dejavu: for subtitle font
opus: for opus support[Installiert]
libssh2: for sftp support[Installiert]
lua-socket: for http interface
Benötigt von : Nichts
Optional für: Nichts
Konflikt mit : vlc-plugin
Ersetzt : vlc-plugin
Installationsgröße: 44319,00 KiB
Packer : Giovanni Scafora <[email protected]>
Erstellt am : Mi 09 Jul 2014 15:14:36 CEST
Installiert am : Sa 12 Jul 2014 21:15:04 CEST
Installationsgrund : Ausdrücklich installiert
Installations-Skript : Ja
Verifiziert durch: Signatur -
Could not open log file in Win2000 sp3 Message in console
I have configured log file for ias. Then restarted my Application server. It is giving Error message "Could not open log file ''logs/logVal.10817" in kas window. But logs files are there (created by the server itself) in the logs floder.
I have configured logs for two systems.
One system is noted all messages in the file
Second system did not not any messages.
But the files are existed in the logs folder in both the systems.
I need to configure logs for ias,Kjs and KXS also.
Please suggest me regarding this.
thanks
sudheerHi,
I'm not sure what operation are you trying to, can you please confirm that ? Please check what kind of messages did you try to log, is it only errors ? or all errors & warning or all messages ?. If it were only errors and warnings, then there is a possibility that the server did not encounter any of this, due to which the log file can be empty.
Regards
Raj -
Safari could not open page because the server stopped responding
"Could Not Open Page.... Safari could not open page because the server stopped responding"
....but it could worked just fine for the first 2 weeks of iPhone4 ownership.
WiFi network at home, working fine with MacBook, visiting friends' phones, my new iPhone4 - no problems. Had to power down the modem & router very briefly last night. Rebooted, MacBook connected fine, iPhone doesn't - it goes through the motions - shows all signs of full connection, full signal, password accepted etc etc - but web pages will not open, displaying after 30 secs the warning message above.
Tried at work on another wireless network - same response.
Have gone through all the FAQs, reset network settings, forgotten network etc - still nothing.
Anyone experienced the same and fixed it?
cheersI'm having a very similar problem, but it's with my 3G connection, not with wifi. The display tells me there is 3G connectivity, and I get the loading symbol, but pages stop loading a few seconds after I try to open them, and some time later I get the "server stopped responding" message. That happens with addresses I know are working, such as Google. Some times, restarting the iPhone or the internet connection (by switching plane mode on and off) solves the issue, but it has been happening often these days.
-
Click the Firefox 4 icon. A window opens with the warning:
"Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features"
(There are no read/write restrictions on my Applications folder and plenty of room on the hard drive.)
Click OK and Firefox opens at the home page, but I cannot navigate to any other URL or link. I had the same behavior when I tried FireFox 3)First, use a specific [[Managing profiles|profile]] for Firefox 4.0 Beta and keep your current one for Firefox 3.6 to prevent interferences between both versions.
Then, see [[Could not initialize the browser security component]]. -
WARNING:Could not lower the asynch I/O limit to 1056 for SQL direct I/O.
Hi ,
I am getting below warnings in the user dump after upgrading to 10.2.0.5 from 9.2.0.1 on windows server (32 bit)
WARNING:Could not lower the asynch I/O limit to 1056 for SQL direct I/O. It is set to -1
Kindly let me know as to why these warnings are generated in the user dump.
SQL> show parameter synch
NAME TYPE VALUE
disk_asynch_io boolean TRUE
tape_asynch_io boolean TRUE
Thanks,
SachinWelcome to the forums !
This seems to be a known issue - pl see these MOS Docs
https://supporthtml.oracle.com/ep/faces/secure/km/BugDisplay.jspx?id=9772888&bugProductSource=Oracle
9772888.8 - Bug 9772888 - "WARNING:Could not lower the asynch I/O ... It is set to -1" messages
Seems to be fixed on 11.2.0.2 (or 10.2.0.5 patch 1 for Windows - see MOS Doc 342443.1 (10.2.0.x Oracle Database and Networking Patches for Microsoft Platforms))
Pl open an SR with Support to verify if this is a cause for concern, as it is not clear from these docs whether this causes any corruption
HTH
Srini -
WARNING: Could not bind factory to JNDI
Hi i am using tomcat server5.5
Eclipse 3.2 and adding tomcat plug-in's to my Eclipse
i created JNDI on tomcat server i got this type of error
plez any one can help me
i got this type WARNING
WARNING: Could not bind factory to JNDI
javax.naming.NamingException: Context is read only
how can i over come this worning
the server show message like
INFO: Factory name: java:hibernate/SessionFactory
May 2, 2007 9:12:24 AM org.hibernate.util.NamingHelper getInitialContext
INFO: JNDI InitialContext properties:{}
May 2, 2007 9:12:24 AM org.hibernate.util.NamingHelper bind
INFO: Creating subcontext: java:hibernate
May 2, 2007 9:12:24 AM org.hibernate.impl.SessionFactoryObjectFactory addInstanc
e
WARNING: Could not bind factory to JNDI
javax.naming.NamingException: Context is read only
at org.apache.naming.NamingContext.checkWritable(NamingContext.java:901)
at org.apache.naming.NamingContext.createSubcontext(NamingContext.java:5
15)
at org.apache.naming.NamingContext.createSubcontext(NamingContext.java:5
36)
at org.apache.naming.SelectorContext.createSubcontext(SelectorContext.ja
va:421)
at javax.naming.InitialContext.createSubcontext(InitialContext.java:423)
at org.hibernate.util.NamingHelper.bind(NamingHelper.java:69)
at org.hibernate.impl.SessionFactoryObjectFactory.addInstance(SessionFac
toryObjectFactory.java:90)
at org.hibernate.impl.SessionFactoryImpl.<init>(SessionFactoryImpl.java:
303)
at org.hibernate.cfg.Configuration.buildSessionFactory(Configuration.jav
a:1213)
at com.gssamerica.expensereporting.business.dao.HibernateUtil.<clinit>(H
ibernateUtil.java:38)
at com.gssamerica.expensereporting.business.dao.RoleHome.roleList(RoleHo
me.java:159)
at com.gssamerica.expensereporting.business.listener.LookupCacheListener
.cacheRoles(LookupCacheListener.java:168)
at com.gssamerica.expensereporting.business.listener.LookupCacheListener
.contextInitialized(LookupCacheListener.java:48)
at org.apache.catalina.core.StandardContext.listenerStart(StandardContex
t.java:3827)
at org.apache.catalina.core.StandardContext.start(StandardContext.java:4
343)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1083)
at org.apache.catalina.core.StandardHost.start(StandardHost.java:789)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1083)
at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:478
at org.apache.catalina.core.StandardService.start(StandardService.java:4
80)
at org.apache.catalina.core.StandardServer.start(StandardServer.java:231
3)
at org.apache.catalina.startup.Catalina.start(Catalina.java:556)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:287)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:425)
May 2, 2007 9:12:24 AM org.hibernate.cache.UpdateTimestampsCache <init>
INFO: starting update timestamps cache at region: org.hibernate.cache.UpdateTime
stampsCache
May 2, 2007 9:12:24 AM org.hibernate.cache.EhCacheProvider buildCache
WARNING: Could not find configuration [org.hibernate.cache.UpdateTimestampsCache
]; using defaults.
May 2, 2007 9:12:24 AM org.hibernate.cache.StandardQueryCache <init>
INFO: starting query cache at region: org.hibernate.cache.StandardQueryCache
May 2, 2007 9:12:24 AM org.hibernate.cache.EhCacheProvider buildCache
WARNING: Could not find configuration [org.hibernate.cache.StandardQueryCache];
using defaults.
Roles Cached......
##################>.SessionImpl(PersistenceContext[entityKeys=[],collectionKeys=
[]];ActionQueue[insertions=[] updates=[] deletions=[] collectionCreations=[] col
lectionRemovals=[] collectionUpdates=[]])
Currencies Cached.......
Countries Cached.......
JNDI DATASOURCE USED ........................................
Instance Created .................
org.apache.commons.dbcp.SQLNestedException: Cannot create JDBC driver of class '
' for connect URL 'null'
at org.apache.commons.dbcp.BasicDataSource.createDataSource(BasicDataSou
rce.java:780)
at org.apache.commons.dbcp.BasicDataSource.getConnection(BasicDataSource
.java:540)
at com.gssamerica.expensereporting.ui.common.SQLManager.getConnection(SQ
LManager.java:93)
at com.gssamerica.expensereporting.business.dao.CacheHome.getExpenseIds(
CacheHome.java:63)
at com.gssamerica.expensereporting.business.listener.LookupCacheListener
.cacheExpenseId(LookupCacheListener.java:191)
at com.gssamerica.expensereporting.business.listener.LookupCacheListener
.contextInitialized(LookupCacheListener.java:51)
at org.apache.catalina.core.StandardContext.listenerStart(StandardContex
t.java:3827)
at org.apache.catalina.core.StandardContext.start(StandardContext.java:4
343)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1083)
at org.apache.catalina.core.StandardHost.start(StandardHost.java:789)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1083)
at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:478
at org.apache.catalina.core.StandardService.start(StandardService.java:4
80)
at org.apache.catalina.core.StandardServer.start(StandardServer.java:231
3)
at org.apache.catalina.startup.Catalina.start(Catalina.java:556)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:287)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:425)
Caused by: java.sql.SQLException: No suitable driver
at java.sql.DriverManager.getDriver(DriverManager.java:243)
at org.apache.commons.dbcp.BasicDataSource.createDataSource(BasicDataSou
rce.java:773)
... 20 more
Connection Error - Exchange Rates cannot be Stored in Database
Expense Ids Cached......
Statuses Cached......
May 2, 2007 9:12:27 AM org.apache.catalina.startup.ContextConfig applicationConf
ig
INFO: Missing application web.xml, using defaults only StandardEngine[Catalina].
StandardHost[localhost].StandardContext[SCWCDProj]
log4j:WARN No appenders could be found for logger (org.apache.commons.beanutils.
ConvertUtils).
log4j:WARN Please initialize the log4j system properly.
log4j:ERROR Could not read configuration file from URL [file:E:/WebExpenses/Test
ValidationsTomcat/WEB-INF/classes/log4j.properties].
java.io.FileNotFoundException: E:\WebExpenses\TestValidationsTomcat\WEB-INF\clas
ses\log4j.properties (The system cannot find the file specified)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:106)
at java.io.FileInputStream.<init>(FileInputStream.java:66)
at sun.net.www.protocol.file.FileURLConnection.connect(FileURLConnection
.java:70)
at sun.net.www.protocol.file.FileURLConnection.getInputStream(FileURLCon
nection.java:161)
at java.net.URL.openStream(URL.java:1007)
at org.apache.log4j.PropertyConfigurator.doConfigure(PropertyConfigurato
r.java:433)
at org.apache.log4j.PropertyConfigurator.configure(PropertyConfigurator.
java:336)
at org.springframework.util.Log4jConfigurer.initLogging(Log4jConfigurer.
java:70)
at org.springframework.web.util.Log4jWebConfigurer.initLogging(Log4jWebC
onfigurer.java:151)
at org.springframework.web.util.Log4jConfigListener.contextInitialized(L
og4jConfigListener.java:51)
at org.apache.catalina.core.StandardContext.listenerStart(StandardContex
t.java:3827)
at org.apache.catalina.core.StandardContext.start(StandardContext.java:4
343)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1083)
at org.apache.catalina.core.StandardHost.start(StandardHost.java:789)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1083)
at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:478
at org.apache.catalina.core.StandardService.start(StandardService.java:4
80)
at org.apache.catalina.core.StandardServer.start(StandardServer.java:231
3)
at org.apache.catalina.startup.Catalina.start(Catalina.java:556)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:287)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:425)
log4j:ERROR Ignoring configuration file [file:E:/WebExpenses/TestValidationsTomc
at/WEB-INF/classes/log4j.properties].
May 2, 2007 9:12:30 AM org.apache.catalina.core.StandardContext start
SEVERE: Error listenerStart
May 2, 2007 9:12:31 AM org.apache.catalina.core.StandardContext start
SEVERE: Context startup failed due to previous errors
May 2, 2007 9:12:32 AM org.apache.catalina.loader.WebappClassLoader validateJarF
ile
INFO: validateJarFile(E:\WebExpenses\JSFDataBaseConnection\WEB-INF\lib\servlet-a
pi.jar) - jar not loaded. See Servlet Spec 2.3, section 9.7.2. Offending class:
javax/servlet/Servlet.class
log4j:WARN No appenders could be found for logger (org.apache.commons.beanutils.
ConvertUtils).
log4j:WARN Please initialize the log4j system properly.
May 2, 2007 9:12:35 AM org.apache.catalina.startup.ContextConfig applicationConf
ig
INFO: Missing application web.xml, using defaults only StandardEngine[Catalina].
StandardHost[localhost].StandardContext[WebServicesApp]
May 2, 2007 9:12:37 AM org.apache.catalina.loader.WebappClassLoader validateJarF
ile
INFO: validateJarFile(E:\WebExpenses\JSFApplication\WEB-INF\lib\servlet-api.jar)
- jar not loaded. See Servlet Spec 2.3, section 9.7.2. Offending class: javax/s
ervlet/Servlet.class
May 2, 2007 9:12:39 AM org.apache.catalina.core.StandardHost getDeployer
INFO: Create Host deployer for direct deployment ( non-jmx )
May 2, 2007 9:12:39 AM org.apache.catalina.core.StandardHostDeployer install
INFO: Processing Context configuration file URL file:C:\Tomcat 5.0\conf\Catalina
\localhost\admin.xml
May 2, 2007 9:12:40 AM org.apache.struts.util.PropertyMessageResources <init>
INFO: Initializing, config='org.apache.struts.util.LocalStrings', returnNull=tru
e
May 2, 2007 9:12:40 AM org.apache.struts.util.PropertyMessageResources <init>
INFO: Initializing, config='org.apache.struts.action.ActionResources', returnNul
l=true
May 2, 2007 9:12:40 AM org.apache.struts.util.PropertyMessageResources <init>
INFO: Initializing, config='org.apache.webapp.admin.ApplicationResources', retur
nNull=true
May 2, 2007 9:12:42 AM org.apache.catalina.core.StandardHostDeployer install
INFO: Processing Context configuration file URL file:C:\Tomcat 5.0\conf\Catalina
\localhost\balancer.xml
May 2, 2007 9:12:43 AM org.apache.catalina.core.StandardHostDeployer install
INFO: Processing Context configuration file URL file:C:\Tomcat 5.0\conf\Catalina
\localhost\jsp-examples.xml
May 2, 2007 9:12:43 AM org.apache.catalina.core.StandardHostDeployer install
INFO: Processing Context configuration file URL file:C:\Tomcat 5.0\conf\Catalina
\localhost\manager.xml
May 2, 2007 9:12:44 AM org.apache.catalina.core.StandardHostDeployer install
INFO: Processing Context configuration file URL file:C:\Tomcat 5.0\conf\Catalina
\localhost\ROOT.xml
May 2, 2007 9:12:44 AM org.apache.catalina.core.StandardHostDeployer install
INFO: Processing Context configuration file URL file:C:\Tomcat 5.0\conf\Catalina
\localhost\servlets-examples.xml
May 2, 2007 9:12:44 AM org.apache.catalina.core.StandardHostDeployer install
INFO: Processing Context configuration file URL file:C:\Tomcat 5.0\conf\Catalina
\localhost\tomcat-docs.xml
May 2, 2007 9:12:44 AM org.apache.catalina.core.StandardHostDeployer install
INFO: Processing Context configuration file URL file:C:\Tomcat 5.0\conf\Catalina
\localhost\TomcatJNDIProj.xml
log4j:WARN No appenders could be found for logger (org.apache.commons.beanutils.
ConvertUtils).
log4j:WARN Please initialize the log4j system properly.
May 2, 2007 9:12:45 AM org.apache.catalina.core.StandardHostDeployer install
INFO: Processing Context configuration file URL file:C:\Tomcat 5.0\conf\Catalina
\localhost\webdav.xml
May 2, 2007 9:12:46 AM org.apache.catalina.core.StandardHostDeployer install
INFO: Installing web application at context path /struts2-blank-2.0.1 from URL f
ile:C:/Tomcat 5.0/webapps/struts2-blank-2.0.1
May 2, 2007 9:12:47 AM org.springframework.web.context.ContextLoader initWebAppl
icationContext
INFO: Root WebApplicationContext: initialization started
May 2, 2007 9:12:47 AM org.springframework.core.CollectionFactory <clinit>
INFO: JDK 1.4+ collections available
May 2, 2007 9:12:47 AM org.springframework.core.CollectionFactory <clinit>
INFO: Commons Collections 3.x available
May 2, 2007 9:12:47 AM org.springframework.beans.factory.xml.XmlBeanDefinitionRe
ader loadBeanDefinitions
INFO: Loading XML bean definitions from ServletContext resource [/WEB-INF/applic
ationContext.xml]
May 2, 2007 9:12:47 AM org.springframework.context.support.AbstractRefreshableAp
plicationContext refreshBeanFactory
INFO: Bean factory for application context [Root WebApplicationContext]: org.spr
ingframework.beans.factory.support.DefaultListableBeanFactory defining beans [];
root of BeanFactory hierarchy
May 2, 2007 9:12:48 AM org.springframework.context.support.AbstractApplicationCo
ntext refresh
INFO: No beans defined in application context [Root WebApplicationContext]
May 2, 2007 9:12:48 AM org.springframework.context.support.AbstractApplicationCo
ntext initMessageSource
INFO: Unable to locate MessageSource with name 'messageSource': using default [o
[email protected]]
May 2, 2007 9:12:48 AM org.springframework.context.support.AbstractApplicationCo
ntext initApplicationEventMulticaster
INFO: Unable to locate ApplicationEventMulticaster with name 'applicationEventMu
lticaster': using default [org.springframework.context.event.SimpleApplicationEv
entMulticaster@2f7cfe]
May 2, 2007 9:12:48 AM org.springframework.ui.context.support.UiApplicationConte
xtUtils initThemeSource
INFO: Unable to locate ThemeSource with name 'themeSource': using default [org.s
[email protected]3]
May 2, 2007 9:12:48 AM org.springframework.beans.factory.support.DefaultListable
BeanFactory preInstantiateSingletons
INFO: Pre-instantiating singletons in factory [org.springframework.beans.factory
.support.DefaultListableBeanFactory defining beans []; root of BeanFactory hiera
rchy]
May 2, 2007 9:12:48 AM org.springframework.web.context.ContextLoader initWebAppl
icationContext
INFO: Using context class [org.springframework.web.context.support.XmlWebApplica
tionContext] for root WebApplicationContext
May 2, 2007 9:12:48 AM org.springframework.web.context.ContextLoader initWebAppl
icationContext
INFO: Root WebApplicationContext: initialization completed in 1638 ms
May 2, 2007 9:12:49 AM org.apache.catalina.core.StandardHostDeployer install
INFO: Installing web application at context path /HibElearning from URL file:C:\
Tomcat 5.0\webapps\HibElearning
May 2, 2007 9:12:50 AM org.apache.catalina.loader.WebappClassLoader validateJarF
ile
INFO: validateJarFile(C:\Tomcat 5.0\webapps\HibElearning\WEB-INF\lib\servlet-api
.jar) - jar not loaded. See Servlet Spec 2.3, section 9.7.2. Offending class: ja
vax/servlet/Servlet.class
log4j:WARN No appenders could be found for logger (org.apache.commons.beanutils.
ConvertUtils).
log4j:WARN Please initialize the log4j system properly.
May 2, 2007 9:12:51 AM org.apache.catalina.core.StandardHostDeployer install
INFO: Installing web application at context path /reddy from URL file:C:\Tomcat
5.0\webapps\reddy
May 2, 2007 9:12:52 AM org.springframework.web.context.ContextLoader initWebAppl
icationContext
INFO: Root WebApplicationContext: initialization started
May 2, 2007 9:12:52 AM org.springframework.core.CollectionFactory <clinit>
INFO: JDK 1.4+ collections available
May 2, 2007 9:12:52 AM org.springframework.core.CollectionFactory <clinit>
INFO: Commons Collections 3.x available
May 2, 2007 9:12:52 AM org.springframework.beans.factory.xml.XmlBeanDefinitionRe
ader loadBeanDefinitions
INFO: Loading XML bean definitions from ServletContext resource [/WEB-INF/applic
ationContext.xml]
May 2, 2007 9:12:52 AM org.springframework.context.support.AbstractRefreshableAp
plicationContext refreshBeanFactory
INFO: Bean factory for application context [Root WebApplicationContext]: org.spr
ingframework.beans.factory.support.DefaultListableBeanFactory defining beans [];
root of BeanFactory hierarchy
May 2, 2007 9:12:52 AM org.springframework.context.support.AbstractApplicationCo
ntext refresh
INFO: No beans defined in application context [Root WebApplicationContext]
May 2, 2007 9:12:53 AM org.springframework.context.support.AbstractApplicationCo
ntext initMessageSource
INFO: Unable to locate MessageSource with name 'messageSource': using default [o
[email protected]]
May 2, 2007 9:12:53 AM org.springframework.context.support.AbstractApplicationCo
ntext initApplicationEventMulticaster
INFO: Unable to locate ApplicationEventMulticaster with name 'applicationEventMu
lticaster': using default [org.springframework.context.event.SimpleApplicationEv
entMulticaster@fae78f]
May 2, 2007 9:12:53 AM org.springframework.ui.context.support.UiApplicationConte
xtUtils initThemeSource
INFO: Unable to locate ThemeSource with name 'themeSource': using default [org.s
[email protected]3]
May 2, 2007 9:12:53 AM org.springframework.beans.factory.support.DefaultListable
BeanFactory preInstantiateSingletons
INFO: Pre-instantiating singletons in factory [org.springframework.beans.factory
.support.DefaultListableBeanFactory defining beans []; root of BeanFactory hiera
rchy]
May 2, 2007 9:12:53 AM org.springframework.web.context.ContextLoader initWebAppl
icationContext
INFO: Using context class [org.springframework.web.context.support.XmlWebApplica
tionContext] for root WebApplicationContext
May 2, 2007 9:12:53 AM org.springframework.web.context.ContextLoader initWebAppl
icationContext
INFO: Root WebApplicationContext: initialization completed in 1279 ms
May 2, 2007 9:12:53 AM org.apache.coyote.http11.Http11Protocol start
INFO: Starting Coyote HTTP/1.1 on http-8080
May 2, 2007 9:12:54 AM org.apache.jk.common.ChannelSocket init
INFO: JK2: ajp13 listening on /0.0.0.0:8009
plez any one can help me as early as possibleMaybe this resoruce will be helpful.
Maybe you are looking for
-
Settings (and other Apps) Will Not Start (Metro)
This morning most Modern Apps will not start on my system, including the Settings app. It seems to be a DCOM failure and seems directly related to this old thread. http://social.msdn.microsoft.com/Forums/en-US/7e6fe520-af09-4a38-b333-30ed5978f70c/con
-
Hi I have just received my new 5s and am trying to update everything on my 4s ie sync to computer and transfer apps / contacts et. I then upgraded to the 7.1 system on the 4s and now I cant find the sync page- it doesnt come up automatically when i p
-
How automatic Return processing is done? please can any explain step by step.... Regards, Kenstar
-
Advantage of DMS over "Services for object" functionality
Hi Experts, I have got very basic doubt about advantages of DMS Over existing standard functionality of SAP. We can attach documents or files to SAP Objects using "services for object" push button ( Next to title bar). So please answer for my below q
-
hi friends, can any one tell me material procurement types