SSM 7.0 - Text variable error - Could not acces to Reports

Hi SSM experts,
We are implementing SSM 7.0 SP6 HF1.
After the implementation of a text variable in PAS in order to include it in a report we have lost the access to the reports and the entry and approval settings.
These are the main steps we followed:
1.- Data model created via Cube Builder
2.- Data loaded via Entry and Approval.
3.- With that model the Scorecard and a set of reports were working as expected.
4.- After that we created a text measure directly in PAS via the following command: CREATE yearly TEXT NONKPI50_ACT 'KPI text'.
4.- Due to this creation we have lost the access to the reports in SSM UI and to the Entry and Approval settings in SSM Admin.
Could anyone please advice us in order to solve the problem?
We have realized that if we delete in PAS the text variable created everything returns to the original situation and everything works ok.
Did we create the text variable ok? Is it possible to create text variables in a model created via Cube
Builder and loaded via Entry and Approval?
Thank you very much in advance.
Kind regards,
Santiago

Robert, Ricardo,
this text variable is just a variable to be used in a navigator report, not to be used in SC. Sorry if I was not clear.
Robert, I will deal this probelm with the customer message team but if anybody has came up with this problem in any project please let me know how to solve it.
Anyway I will check how CONSTANT TEXT works. I will appreciate if you would let me know the result of your checkings.
Thank you very much for your help.
Regards,
Santiago

Similar Messages

  • CiscoWorks LMS 4.0.1 - Could not generate the report

    Hello,
    I am running CiscoWorks LMS 4.0.1 since 6 months and I wanted to generate today a report about the interface utilization on 2 Cisco switches (Catalyst 3750G). The corresponding job is created, it runs and then i get "succeeded with info" in the "Run Status" column. When I want to click then on the "View Report" link, I get the following error: "Could not generate the report. Either data is not available for the specified duration or the report job failed."
    I tried the same procedure with 2 other switches but I have got the same result.
    Does anybody has an idea of how I can fix this issue?
    Thanks a lot in advanced.
    Best regards,
    Marc Hoffmann

    Hi Marc,
    I have this problem too. I rebooted my Windows but no solved. You known the service name responsible for this error? You have any other sugestion?
    Thank you !!!

  • Photoshop cs6 error "could not use the type tool because the target channel is hidden.  happens when im typing in photoshop, go to another layer and then come back. can't alter text at that point

    photoshop cs6 error "could not use the type tool because the target channel is hidden.  happens when im typing in photoshop, go to another layer and then come back. can't alter text at that point.  i really need to get thsi figured out. thank you.

    You may have answered my question. I AM using the 64bit version of Illustrator CS6. I had no idea there were bugs in it that affected paths copied and pasted from Illustrator to Photoshop.
    A bit more about what I'm trying to accomplish... I'm trying to follow Deke's tutorial (http://www.deke.com/content/dekes-techniques-018-creating-a-3d-pie-chart) which is already difficult since so much has changed between CS5.5 and 6, but then on top of that, I keep getting errors!
    So I created the pie chart exactly as he shows and copied and pasted into Photoshop exactly as he does. Before submitting this post, though, I tried drawing just two very simple triangle shapes, copying them both and pasting them into Photoshop as a shape layer. The shapes weren't overlapping, but they were a part of the same shape layer just like the pie chart tutorial.
    Thanks for your help. If there is anything else I should try before just giving up because of the 64bit bugs, please let me know.

  • Error: Could not continue scan with nolock due to data movement, DBCC proccache will clear the probelm

    SQL Server: 2008 R2 SP2
    Before describing my problem, I have gone via the forum, there is no view or functions inside my stored procedure
    When running a particular stored procedure inside crystal report, the error " Could not continue scan with nolock due to data movement" comes once every few weeks. After I clear the query cache plan, it works again for few weeks and the problem
    comes again. During these few weeks, there is no restart or query plan clearing.
    If I run the stored procedure inside SSMS, where the SQL statement is copied and pasted from SQL profiler during crystal report run, there is no error.
    I discovered running in SSMS and crystal report generate 2 different query plans even I copied the SQL from SQL profiler, I have actually saved the query plans. Unfortunately, this forum does not accept attachments, or otherwise I will post my query plans
    here.
    There is one thing I notice about the query plan is during nested loop operation, there is a warning "no join predicate". I don't use any views or UDF in the statement, nor did I use pre-1992 ANSI join syntax. However, I did use table variables.
    My guess is whether this will cause " Could not continue scan with nolock due to data movement", after I clear the cache, I run crystal report again, and I look at the plan again, the "nested loop no join predicate" warning is gone.
    Running this stored procedure took 1 second maximum, even when this error is popping up, it pop up within 1 second.
    DBCC checkdb has been run
    The same stored procedure running by crystal report in a SQL 2008 (non r2) live environment has no problems, so I am thinking this is R2 specific problems.
    The "nested loop no join predicate" error SQL statment is below, no views, no udf, but table variables
    INSERT @ChequeAccount
    SELECT        PS.PaySummaryID, PS.EmployeeID, PS.CostCentreID,
                (PS.GrossPay    + PS.LumpSumA + PS.LumpSumB    + PS.LumpSumD+ PS.LumpSumE+ PS.ETP+ PS.PaymentsAfterTax    - PS.DeductionsAfterTax  
     - PS.Tax- PS.ETPTax    + PS.TaxRebate) * -1 AS Amount,
                CGLM.GLAccountID
    FROM Pay_Summary PS JOIN Input_Sheet ISH ON PS.InputSheetID = ISH.InputSheetID  AND  ISH.PayrollID = @binPayrollID   
    AND PS.PaySummaryID NOT IN (SELECT PaySummaryID FROM @ChequeAccount)
    JOIN Payroll P ON P.PayrollID = ISH.PayrollID AND P.EmployerID = @binEmployerID
    JOIN CustomGLFixMapping CGLM ON CGLM.EmployerID = P.EmployerID AND CustomGLFixMappingNameID = 1 AND CGLM.CostCentreID IS NULL

    The error Could not continue scan with nolock due to data movement can occur when you use the NOLOCK table hint, or use the command SET TRANSACTION ISOLATION LEVEL READ UNCOMMITTED. That is, so-called dirty reads. The error is not related to the
    query plan per se, but when scanning a table, the storage engine will use an IAM scan rather than following the clustered index. If there is simultaneous activity, the storage engine may detect this and abort the operation to avoid returning incorrect data.
    Or it may not detect it, and return uncommitted data or fail to return committed data.
    All of these effects are transitory and they will not show up when you are alone on the system, only when there is concurrent activity in one or more of the tables in the query.
    Using dirty reads is a risky business for the reasons explained above, and it takes careful analysis to understand whether you can live with the errors you can get from a particular query. The error about data movement can be handled: trap the error and
    resubmit the query. But what about spurious incorrect results?
    If you believe locking to be a problem, you should consider setting the database to READ_COMMITTED_SNAPSHOT
    and take out all use of READ UNCOMMITTED/NOLOCK. When the database is in READ_COMMITTED_SNAPSHOT, readers read from the snapshot and only see committed data without blocking writers. This has some other effects like requiring a bigger tempdb,
    and there is a risk for other types of concurrency errors, but they tend to be smaller risks.
    I discovered running in SSMS and crystal report generate 2 different query plans even I copied the SQL from SQL profiler,
    This is because SSMS by default runs with SET ARITHABORT ON. I discuss this in more detail in this article on my web site:
    http://www.sommarskog.se/query-plan-mysteries.html
    However, as I said, this problem is not related to the query plan as such, although some query plans are more susceptible to this error than others. (All plans are suscpeitble to produce incorrect results).
    Erland Sommarskog, SQL Server MVP, [email protected]

  • Type layer error: Could not complete your request because of a program error.

    I am trying to rebuild text in a photo. I clicked the type tool, clicked on the background layer (knowing a new one should form) and got this error:
    Could not complete your request because of a program error.
    Then I made a new blank layer, clicked on it and got the same error.
    I quit, relaunched started typing the new layer without a hitch. But when I selected to change the font (to any font), I got the same error
    I switched to Firefox to search for the problem and went back to PSCS5. Now I can change the font! After switching applications and clicking on the type layer, I get the error again! Then it's fixed. Then it comes back.
    Anyone have this problem or a solution?
    I'm using Mac OS 10.5.8 with PSCS5 12.0.1

    Most likely you have a corrupt font which is causing problems for some of the type/font code.
    Try validating your fonts with FontBook as a first step.

  • Error: Could not start Service[keystone]: Execution of '/sbin/service openstack-keystone start' returned 1: Starting keystone: [FAILED]

    I'm using Oracle Linux 6u6. While I'm installing openstack ( 2 node set up) using packstack, I'm getting this error:
    Applying 10.245.33.37_cinder.pp
    10.245.33.37_keystone.pp:                         [ ERROR ]
    Applying Puppet manifests                         [ ERROR ]
    ERROR : Error appeared during Puppet run: 10.245.33.37_keystone.pp
    Error: Could not start Service[keystone]: Execution of '/sbin/service openstack-keystone start' returned 1: Starting keystone: [FAILED]
    You will find full trace in log /var/tmp/packstack/20150327-100335-ltC8Ic/manifests/10.245.33.37_keystone.pp.log
    Please check log file /var/tmp/packstack/20150327-100335-ltC8Ic/openstack-setup.log for more information
    Additional information:
    * A new answerfile was created in: /root/packstack-answers-20150327-100336.txt
    * Time synchronization installation was skipped. Please note that unsynchronized time on server instances might be problem for some OpenStack components.
    * Did not create a cinder volume group, one already existed
    * File /root/keystonerc_admin has been created on OpenStack client host 10.245.33.37. To use the command line tools you need to source the file.
    * To access the OpenStack Dashboard browse to http://10.245.33.37/dashboard .
    Please, find your login credentials stored in the keystonerc_admin in your home directory.
    Packages:
    [root@slcai461 ~]# rpm -qa|grep keystone
    python-keystoneclient-0.9.0-5.el6.noarch
    python-keystone-2014.1.3-2.el6.noarch
    openstack-keystone-2014.1.3-2.el6.noarch
    [root@slcai461 ~]# rpm -qa|grep packstack
    openstack-packstack-puppet-2014.1.1-0.12.dev1068.0.4.el6.noarch
    openstack-packstack-2014.1.1-0.12.dev1068.0.4.el6.noarch
    Log :
    [root@slcai461 ~]# cat /var/tmp/packstack/20150327-100335-ltC8Ic/manifests/10.245.33.37_keystone.pp.log
    Warning: Config file /etc/puppet/hiera.yaml not found, using Hiera defaults
    Warning: Scope(Class[Keystone]): The sql_connection parameter is deprecated, use database_connection instead.
    Warning: Scope(Class[Keystone]): token_format parameter is deprecated. Use token_provider instead.
    Warning: Scope(Class[Keystone::Endpoint]): The public_address parameter is deprecated, use public_url instead.
    Warning: Scope(Class[Keystone::Endpoint]): The internal_address parameter is deprecated, use internal_url instead.
    Warning: Scope(Class[Keystone::Endpoint]): The admin_address parameter is deprecated, use admin_url instead.
    Warning: Scope(Class[Nova::Keystone::Auth]): The cinder parameter is deprecated and has no effect.
    Notice: Compiled catalog for slcai461.us.oracle.com in environment production in 1.60 seconds
    Warning: The package type's allow_virtual parameter will be changing its default value from false to true in a future release. If you do not want to allow virtual packages, please explicitly set allow_virtual to false.
       (at /usr/lib/ruby/site_ruby/1.8/puppet/type.rb:816:in `set_default')
    Notice: /Stage[main]/Keystone/Keystone_config[DEFAULT/admin_token]/value: value changed '[old secret redacted]' to '[new secret redacted]'
    Notice: /Stage[main]/Keystone/Keystone_config[database/connection]/value: value changed '[old secret redacted]' to '[new secret redacted]'
    Notice: /Stage[main]/Keystone::Db::Sync/Exec[keystone-manage db_sync]: Triggered 'refresh' from 3 events
    Notice: /Stage[main]/Keystone/Exec[keystone-manage pki_setup]: Triggered 'refresh' from 2 events
    Error: Could not start Service[keystone]: Execution of '/sbin/service openstack-keystone start' returned 1: Starting keystone: [FAILED]
    Wrapped exception:
    Execution of '/sbin/service openstack-keystone start' returned 1: Starting keystone: [FAILED]
    Error: /Stage[main]/Keystone::Service/Service[keystone]/ensure: change from stopped to running failed: Could not start Service[keystone]: Execution of '/sbin/service openstack-keystone start' returned 1: Starting keystone: [FAILED]
    Notice: /Stage[main]/Keystone::Service/Service[keystone]: Triggered 'refresh' from 5 events
    Notice: /Stage[main]/Neutron::Keystone::Auth/Keystone_service[neutron]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Neutron::Keystone::Auth/Keystone_service[neutron]: Skipping because of failed dependencies
    Notice: /Stage[main]/Keystone::Roles::Admin/Keystone_tenant[admin]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Keystone::Roles::Admin/Keystone_tenant[admin]: Skipping because of failed dependencies
    Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_service[nova_ec2]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_service[nova_ec2]: Skipping because of failed dependencies
    Notice: /Stage[main]/Cinder::Keystone::Auth/Keystone_service[cinderv2]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Cinder::Keystone::Auth/Keystone_service[cinderv2]: Skipping because of failed dependencies
    Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_service[novav3]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_service[novav3]: Skipping because of failed dependencies
    Notice: /Stage[main]/Keystone::Roles::Admin/Keystone_tenant[services]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Keystone::Roles::Admin/Keystone_tenant[services]: Skipping because of failed dependencies
    Notice: /Stage[main]/Neutron::Keystone::Auth/Keystone_user[neutron]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Neutron::Keystone::Auth/Keystone_user[neutron]: Skipping because of failed dependencies
    Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_user[nova]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_user[nova]: Skipping because of failed dependencies
    Notice: /Stage[main]/Glance::Keystone::Auth/Keystone_user[glance]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Glance::Keystone::Auth/Keystone_user[glance]: Skipping because of failed dependencies
    Notice: /Stage[main]/Keystone::Roles::Admin/Keystone_role[admin]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Keystone::Roles::Admin/Keystone_role[admin]: Skipping because of failed dependencies
    Notice: /Stage[main]/Glance::Keystone::Auth/Keystone_user_role[glance@services]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Glance::Keystone::Auth/Keystone_user_role[glance@services]: Skipping because of failed dependencies
    Notice: /Stage[main]/Keystone::Endpoint/Keystone_service[keystone]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Keystone::Endpoint/Keystone_service[keystone]: Skipping because of failed dependencies
    Error: Could not prefetch keystone_endpoint provider 'keystone': Execution of '/usr/bin/keystone --os-endpoint http://127.0.0.1:35357/v2.0/ endpoint-list' returned 1: An unexpected error prevented the server from fulfilling your request. (HTTP 500)
    Notice: /Stage[main]/Keystone::Endpoint/Keystone_endpoint[RegionOne/keystone]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Keystone::Endpoint/Keystone_endpoint[RegionOne/keystone]: Skipping because of failed dependencies
    Notice: /Stage[main]/Main/Keystone_service[cinder_v2]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Main/Keystone_service[cinder_v2]: Skipping because of failed dependencies
    Notice: /Stage[main]/Main/Keystone_endpoint[RegionOne/cinder_v2]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Main/Keystone_endpoint[RegionOne/cinder_v2]: Skipping because of failed dependencies
    Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_endpoint[RegionOne/novav3]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_endpoint[RegionOne/novav3]: Skipping because of failed dependencies
    Notice: /Stage[main]/Cinder::Keystone::Auth/Keystone_service[cinder]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Cinder::Keystone::Auth/Keystone_service[cinder]: Skipping because of failed dependencies
    Notice: /Stage[main]/Cinder::Keystone::Auth/Keystone_endpoint[RegionOne/cinder]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Cinder::Keystone::Auth/Keystone_endpoint[RegionOne/cinder]: Skipping because of failed dependencies
    Notice: /Stage[main]/Glance::Keystone::Auth/Keystone_service[glance]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Glance::Keystone::Auth/Keystone_service[glance]: Skipping because of failed dependencies
    Notice: /Stage[main]/Glance::Keystone::Auth/Keystone_endpoint[RegionOne/glance]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Glance::Keystone::Auth/Keystone_endpoint[RegionOne/glance]: Skipping because of failed dependencies
    Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_user_role[nova@services]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_user_role[nova@services]: Skipping because of failed dependencies
    Notice: /Stage[main]/Keystone::Roles::Admin/Keystone_user[admin]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Keystone::Roles::Admin/Keystone_user[admin]: Skipping because of failed dependencies
    Notice: /Stage[main]/Keystone::Roles::Admin/Keystone_user_role[admin@admin]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Keystone::Roles::Admin/Keystone_user_role[admin@admin]: Skipping because of failed dependencies
    Notice: /Stage[main]/Cinder::Keystone::Auth/Keystone_user[cinder]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Cinder::Keystone::Auth/Keystone_user[cinder]: Skipping because of failed dependencies
    Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_endpoint[RegionOne/nova_ec2]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_endpoint[RegionOne/nova_ec2]: Skipping because of failed dependencies
    Notice: /Stage[main]/Cinder::Keystone::Auth/Keystone_endpoint[RegionOne/cinderv2]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Cinder::Keystone::Auth/Keystone_endpoint[RegionOne/cinderv2]: Skipping because of failed dependencies
    Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_service[nova]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_service[nova]: Skipping because of failed dependencies
    Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_endpoint[RegionOne/nova]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_endpoint[RegionOne/nova]: Skipping because of failed dependencies
    Notice: /Stage[main]/Neutron::Keystone::Auth/Keystone_user_role[neutron@services]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Neutron::Keystone::Auth/Keystone_user_role[neutron@services]: Skipping because of failed dependencies
    Notice: /Stage[main]/Neutron::Keystone::Auth/Keystone_endpoint[RegionOne/neutron]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Neutron::Keystone::Auth/Keystone_endpoint[RegionOne/neutron]: Skipping because of failed dependencies
    Notice: /Stage[main]/Cinder::Keystone::Auth/Keystone_user_role[cinder@services]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Cinder::Keystone::Auth/Keystone_user_role[cinder@services]: Skipping because of failed dependencies
    Notice: Finished catalog run in 3.10 seconds
    Please let me know how to fix this.

    This problem connected with proxy-setings.
    As the first steps you should try:
           1.  export system env variable:
    http_proxy=http://www-proxy.ru.oracle.com:80
    https_proxy=https://www-proxy.ru.oracle.com:80
    no_proxy=127.0.0.1,localhost
    and you can also export
        export OS_TENANT_NAME=admin
        export OS_USERNAME=admin
        export OS_PASSWORD=root
        export OS_AUTH_URL=http://<conntroller_IP>:5000/v2.0/
    2. and than restart mysqld, if it is running, stop iptables and repeat installation process from beginning with the currently generated answer file
    if we are exporting variable OS_PASSWORD, its value should be the same as value for CONFIG_KEYSTONE_ADMIN_PW in the currently generated answer file.
    This OS_PASSWORD will be written by packstack in the /root/keystonerc_admin file and will be used as admin's password for login to  Openstack dashboard.

  • Layer Comps To Files - Export error: Could not complete this operation. There are no user slices

    I have been using the Export Layer Comps To Files scrips that ships with Adobe Photoshop CS5 for a while and found it very useful, apart from the numbers it automatically adds as a prefix to the layercomp name.
    A friend pointed me in the direction of a altered version of this scrips which removes the numbers and only exports the layer comp name, gerat I thought. Not great! After using this successfully for a while the scrip started to throw up errors whenever I attempted to export. Either "No layer comps found" or "Adobe Save for Web & Devices Error: Could not complete this operation. There are no user slices." As I knew there were layercomps for the first error and knew that I had not created any slices for the second error I was pretty miffed. Fortunately I had the foresight to make a copy of the original script from the Photoshop presets library.
    I have since deleted the offending script out of my presets folder and copied the original script back in however the error still persists. I constantly receive Adobe Save for Web & Devices Error: Could not complete this operation. There are no user slices. I have searched the forums and around the net to try and find a solution for this problem but none seem to present themselves. I am perplex how this error can persist when the original script is now being used.
    If there's is anyone out there who can help me resolve this I'd be most grateful. As I say I've tried to resolve this myself and am pretty computer savvy but this one has defeated me
    Thanks in advance

    The problem seems to be already solved, but I'm commenting this for future reference.
    This has happened to me too and I think I know what causes it.
    It happens when you...
    1) Do "Save for Web" with the "All User Slices" selected in the dropdown menu "Slices".
    (This can only be done with a file that has a user slice)
    2) Then try to use the "Layer Comp to Files" script to a file that doesn't have any slices.
    To avoid this you need to once open a file that "has" a user slice and save with
    the "All Slices" option in the "Slices" menu and then go back to the file you want
    to run the script to.
    When you run the script, the saved "Slices" option from the previous export seems to
    be used and causes an error when there are no user slice.
    I also found a fix to the script to avoid this error to come out.
    This can be also applied to the fix to "remove the numbers" added to the head of the
    exported file names.
    The number removal script goes something like this...
    var fileNameBody = exportInfo.fileNamePrefix;
    if (fileNameBody != "") fileNameBody += "_";
    fileNameBody += compRef.name;
    this should replace the "Layer Comps to Files.jsx" lines 188-190.
    In addition to that, the script below needs to be added below line 818 and line 863.
    (This line numbers are those before any alterations to the "Layer Comps to Files.jsx" script)
    var idSWsl = charIDToTypeID( "SWsl" );
    var idSTsl = charIDToTypeID( "STsl" );
    var idSLAl = charIDToTypeID( "SLAl" );
    desc4.putEnumerated( idSWsl, idSTsl, idSLAl );
    The line right above where the above script should be inserted should read as the following...
    desc4.putPath( id44, new File( exportInfo.destination + "/" + fileNameBody + ".png") );
    Actually it can be added any where after the "desc4" variable is declared but I specified just
    to make it simple.
    This sets the "Save for Web" "Slices" settings to "All User Slices".

  • ERROR:Could not read archive file - during Processing Base System Part 2

    Hi there,
    What I have:
    * I have problem with installation of the Mac OS X Panther v10.3 on iMac.
    * I have 3 original CDs (black with silver X).
    What I did:
    * I made new 1 partition and formated disk as Mac OS Extended (Journaled) over the Disk Utility in the first CD as normal without additional options (if I tried to format disk with zero all data and 8 way random write format after 3 days computer freeze)
    * I verified disk over this utility - that was ok - HFS volume verifed.
    * Then I restarted the computer and ran installation from this first CD
    What happened:
    * installation did not finish, because there were some problems during installation process.
    * i tried to customize installation just for essential work (without other languages support, printers etc), but it was still the same problem
    Installation log:
    After I choosed installation type, there was first error, but it did not look like important.. - root: bootstraplookup(): unknown error code
    Checking your installation disk - OK
    Preparing disk - OK
    Preparing base 1 and 2 - OK
    Other preparing.. - OK
    Processing Base System Part 1 - OK
    Processing Base System Part 2
    ==
    ERROR:Could not read archive file. - pax: Invalid header, starting valid header search.
    ERROR:Could not read archive file. - pax: Invalid header, starting valid header search.
    last message repeated 2 times
    ERROR:Could not write file. - pax: WARNING! These patterns were not matched:
    Some files for Essentials may not have been writen correctly.
    root: Installer[108] Exception raised during posting of notification. Ignored. exception: Some files for Essentials may not have been written correctly. (code 1)
    Install Failed
    Error detected
    Name: NSGenericException
    Reason: Some files for Essentials may not nave been written correctly. (code 1)
    ==
    It seems like a problem with reading some data from the CD, but during the installation checking of disk was ok.. maybe it can be problem with the cd-rom..? Or problem with data on cd-rom - I mean bad archive file..? But it is original CD.. What do you think??
    Thank you!

    Tomas,
    On THIS Page, locate your iMac model.
    From the Documents column, click on the appropriate number link.
    Using the info in the document that opens, locate the serial number of your iMac.
    On THIS Page, in the text field for Search Tech Specs, enter that serial number.
    Click on the model of iMac that appears.
    Post a link to the page that opens, or post the info requested below.
    Exactly which model iMac is it?
    What is the Processor speed?
    What size is the Hard Drive?
    How much Memory is installed?
    What type of internal Optical Drive does it have?
    Which version of OS, was the original Installed Software?
    ali b

  • Error: Could not complete Create LOV Dialog Window...

    Using Jdeveloper 10.1.2 UIX to drop a MessageLovInput onto an Input Form I get the following error:
    Could not complete Create LOV Dialog Window because it would result in an invalid document.
    Clicking on details reveals the following:
    oracle.bali.xml.model.XmlInvalidOnCommitException: Errors
    Errors:
    Element text not defined in parent contents [node = text ]
    invalid subtree:
    <contents>
    <text text="Find the collection (which contains the legal values for the lovInput) in the Data Control Palette. Select the attribute (of the collection) that will be set by the lovInput and drop it into this space as a 'LOV Table'. " />
    </contents>
         at oracle.bali.xml.model.XmlModel._validateSubtree(XmlModel.java:2646)
         at oracle.bali.xml.model.XmlModel._validateDocument(XmlModel.java:2583)
         at oracle.bali.xml.model.XmlModel.precommitTransaction(XmlModel.java:1467)
         at oracle.bali.xml.model.XmlModel._validateInCommit(XmlModel.java:2538)
         at oracle.bali.xml.model.XmlModel.commitTransaction(XmlModel.java:531)
         at oracle.bali.xml.model.XmlModel.commitTransaction(XmlModel.java:516)
         at oracle.cabo.ide.adf.LovModelXml._createLovPage(LovModelXml.java:125)
         at oracle.cabo.ide.adf.LovModelXml.createControl(LovModelXml.java:55)
         at oracle.cabo.ide.adf.UixModelXml.populateFragment(UixModelXml.java:165)
         at oracle.cabo.ide.adf.UixAdfDocumentFragmentProvider.preInitializeNode(UixAdfDocumentFragmentProvider.java:38)
         at oracle.bali.xml.model.datatransfer.XmlKeyDocumentFragmentProvider._createDomNodeFromKey(XmlKeyDocumentFragmentProvider.java:97)
         at oracle.bali.xml.model.datatransfer.XmlKeyDocumentFragmentProvider.createFragment(XmlKeyDocumentFragmentProvider.java:38)
         at oracle.bali.xml.model.XmlModel.getImportedDocumentFragment(XmlModel.java:1771)
         at oracle.bali.xml.model.XmlModel.getFragmentForImportIfPossible(XmlModel.java:1801)
         at oracle.bali.xml.model.XmlModel.importData(XmlModel.java:1078)
         at oracle.bali.xml.model.XmlView.importData(XmlView.java:773)
         at oracle.bali.xml.gui.swing.dnd.ModelDropHandler._transferData(ModelDropHandler.java:624)
         at oracle.bali.xml.gui.swing.dnd.ModelDropHandler.drop(ModelDropHandler.java:235)
         at java.awt.dnd.DropTarget.drop(DropTarget.java:398)
         at sun.awt.dnd.SunDropTargetContextPeer.processDropMessage(SunDropTargetContextPeer.java:542)
         at sun.awt.dnd.SunDropTargetContextPeer.access$800(SunDropTargetContextPeer.java:52)
         at sun.awt.dnd.SunDropTargetContextPeer$EventDispatcher.dispatchDropEvent(SunDropTargetContextPeer.java:805)
         at sun.awt.dnd.SunDropTargetContextPeer$EventDispatcher.dispatchEvent(SunDropTargetContextPeer.java:743)
         at sun.awt.dnd.SunDropTargetEvent.dispatch(SunDropTargetEvent.java:29)
         at java.awt.Component.dispatchEventImpl(Component.java:3494)
         at java.awt.Container.dispatchEventImpl(Container.java:1627)
         at java.awt.Component.dispatchEvent(Component.java:3477)
         at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483)
         at java.awt.LightweightDispatcher.processDropTargetEvent(Container.java:3269)
         at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3123)
         at java.awt.Container.dispatchEventImpl(Container.java:1613)
         at java.awt.Window.dispatchEventImpl(Window.java:1606)
         at java.awt.Component.dispatchEvent(Component.java:3477)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
         at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
    Opening the UIX page, the following code has been generated; not a <listOfValues> tag in sight!
    <?xml version="1.0" encoding="windows-1252"?>
    <page xmlns="http://xmlns.oracle.com/uix/controller"
    xmlns:ui="http://xmlns.oracle.com/uix/ui"
    xmlns:ctrl="http://xmlns.oracle.com/uix/controller"
    xmlns:html="http://www.w3.org/TR/REC-html40"
    expressionLanguage="el">
    <content>
    <dataScope xmlns="http://xmlns.oracle.com/uix/ui">
    <provider>
    <!-- Add DataProviders (<data> elements) here -->
    </provider>
    <contents>
    <document>
    <metaContainer>
    <!-- Set the page title -->
    <head title=""/>
    </metaContainer>
    <contents>
    <body>
    <contents>
    <form name="form0">
    </form>
    </contents>
    </body>
    </contents>
    </document>
    </contents>
    </dataScope>
    </content>
    <handlers>
    <!-- Add EventHandlers (<event> elements) here -->
    </handlers>
    </page>
    I have checked Metalink but can't find this error there either. Based on examples on OTN I have tried to create the LOV window manually but it does not work as expected:
    1) The window is not empty when opened - i.e. data has been retrieved.
    2) The filtering does not work.
    3) The selected value does not update the Input Form.
    I have pasted the code below in case anyone can point me in the right direction to work around the Jdeveloper error. However, I think Jdeveloper should create the LOV window correctly.
    Thanks in advance for your help.
    <?xml version="1.0" encoding="windows-1252"?>
    <page xmlns="http://xmlns.oracle.com/uix/controller"
    xmlns:ui="http://xmlns.oracle.com/uix/ui"
    xmlns:ctrl="http://xmlns.oracle.com/uix/controller"
    xmlns:html="http://www.w3.org/TR/REC-html40" expressionLanguage="el">
    <content>
    <dataScope xmlns="http://xmlns.oracle.com/uix/ui">
    <provider>
    <!-- Add DataProviders (<data> elements) here -->
    </provider>
    <contents>
    <document>
    <metaContainer>
    <!-- Set the page title -->
    <head title=""/>
    </metaContainer>
    <contents>
    <body>
    <contents>
    <listOfValues title="Organization"
    searchText="Enter search string here">
    <contents>
    <!-- indexed children -->
    <table model="${bindings.OrganizationView1}" id="OrganizationView13">
    <contents>
    <column>
    <columnHeader>
    <sortableHeader model="${ctrl:createSortableHeaderModel(bindings.OrganizationView1,'Name')}"/>
    </columnHeader>
    <contents>
    <textInput model="${uix.current.Name}" columns="10" readOnly="true"/>
    </contents>
    </column>
    <column>
    <columnHeader>
    <sortableHeader model="${ctrl:createSortableHeaderModel(bindings.OrganizationView1,'Address')}"/>
    </columnHeader>
    <contents>
    <textInput model="${uix.current.Address}" columns="10" readOnly="true"/>
    </contents>
    </column>
    <column>
    <columnHeader>
    <sortableHeader model="${ctrl:createSortableHeaderModel(bindings.OrganizationView1,'Url')}"/>
    </columnHeader>
    <contents>
    <textInput model="${uix.current.Url}" columns="10" readOnly="true"/>
    </contents>
    </column>
    <column>
    <columnHeader>
    <sortableHeader model="${ctrl:createSortableHeaderModel(bindings.OrganizationView1,'Phone')}"/>
    </columnHeader>
    <contents>
    <textInput model="${uix.current.Phone}" columns="10" readOnly="true"/>
    </contents>
    </column>
    </contents>
    <tableSelection>
    <singleSelection model="${bindings.OrganizationView1Iterator}" text="Select and ">
    <primaryClientAction>
    <firePartialAction targets="OrganizationView13" source="OrganizationView13" event="select"/>
    </primaryClientAction>
    </singleSelection>
    </tableSelection>
    </table>
    </contents>
    <filterChoice>
    <choice name="filterBy">
    <contents>
    <option text="Name" value="name"/>
    <option text="Address" value="address"/>
    </contents>
    </choice>
    </filterChoice>
    <headerInstructions>
    </headerInstructions>
    <searchInstructions>
    </searchInstructions>
    </listOfValues>
    </contents>
    </body>
    </contents>
    </document>
    </contents>
    </dataScope>
    </content>
    <handlers>
    <!-- Add EventHandlers (<event> elements) here -->
    <event name="goto sort" source="OrganizationView13">
    <invoke method="handleTableUiEvent" javaType="oracle.cabo.adf.rt.AdfUtils">
    <parameters>
    <parameter javaType="oracle.adf.model.binding.DCIteratorBinding" value="${bindings.OrganizationView1Iterator}"/>
    <parameter javaType="oracle.cabo.servlet.expl.ControllerImplicitObject" value="${uix}"/>
    </parameters>
    </invoke>
    </event>
    <event name="select" source="OrganizationView13">
    <set target="${bindings.OrganizationView1Iterator}" property="currentRowIndexInRange" value="${ui:tableSelectedIndex(uix, 'OrganizationView13')}"/>
    </event>
    <event name="lovFilter">
    <compound>
    <invoke method="setWhereClause" javaType="oracle.jbo.ViewObject" instance="${bindings.Name.viewObject}">
    <parameters>
    <parameter javaType="string" value="${empty param.filterBy ? 'NAME' : param.filterBy} LIKE '${param.searchText}'"/>
    </parameters>
    </invoke>
    <invoke method="executeQuery" javaType="oracle.jbo.ViewObject" instance="${bindings.Name.viewObject}"/>
    </compound>
    </event>
    </handlers>
    </page>

    Thanks for the response. OK... This is the first day I have been able to get back to the problem.
    My system I am running Photoshop on is a Power Mac G4, AGP Graphics ATY Rage 128Pro chip set 16MB VRAM LCD 1280x1024 32-bit color, 500MHz, 1.75GB of memory, 1 MB L2 Cache, 100 MHz Bus Speed. I had installed the latest security update and repaired the permissions the day the problem started.
    Now to day I started the system and went in and created a Guest Account. I logged into the guest account and started Photoshop. Low and behold it worked just fine. So I logged out of guest and logged into my main user account And started Photoshop. Wouldn't you know it.... It works just fine. I can open any file I want with now problems.
    I got to thinking after I had done all of this that I wished I had tried to open a file in Photoshop today prior to creating the guest account to see if it still had the problem in my main user account.
    I did not change anything else on the system and all seems to work fine now. So at his point I am really not sure what the problem was.
    Again thanks for taking the time to respond to this issue.

  • Error: could not open `C:\Program Files\Java\j2re1.4.0_01\lib\i386\jvm.cfg'

    I am geting this error when I enter the "java" command:
    "Error: could not open `C:\Program Files\Java\j2re1.4.0_01\lib\i386\jvm.cfg'"
    I have configured the PATH variable (Windows 2000) and "javac" works. I cannot, however, get my programs to run because of the error every time I type "java". Also, I did not install my JDK / SDK to the directory in which the computer is looking for the "java" cammand (ie. it is not in 'Program Files'...). If anyone can help, it would be greatly appreciated. Thank you.

    Try using the -cp switch on the command line. For example:java -cp . MyProgramIf this corrects the problem, you need to set the classpath variable
    as well as the path.
    Mark

  • Error could not build a topology to decode the input file

    682593 (3088) - exe\logging.cpp:0841: --- START 2014\11\4 5:38:34 AM ---
    682593 (3088) - exe\main.cpp:4511: WinSAT registry node is created or present
    682609 (3088) - exe\main.cpp:4542: Command Line = winsat  formal
    682625 (3088) - exe\main.cpp:4314: INFO: The axe results path environment variable is not set. Assuming we aren't running under AXE.
    682625 (3088) - exe\main.cpp:4649: INFO: Winsat is not running in AXE mode.
    682625 (3088) - exe\processwinsaterror.cpp:0146: ERROR: tried to read resource strings, unknown exception occured
    682687 (3088) - exe\main.cpp:4741: > IsFormal=TRUE  IsMoobe=FALSE.
    682687 (3088) - exe\watchdog.cpp:0113: WatchDogThreadProc Launched with priority 0
    682734 (3088) - exe\main.cpp:4860: Watch dog system enabled
    682734 (3088) - exe\main.cpp:4875: Main watch dog timer set to 600.0 seconds
    682875 (3088) - common\winsatutilities.cpp:1060: PNPID from DX9 call = PCI\VEN_1002&DEV_9851&SUBSYS_22CE103C&REV_05
    682875 (3088) - common\winsatutilities.cpp:1126: Index [0]: PNPID = PCI\VEN_1002&DEV_9851&SUBSYS_22CE103C&REV_05
    682875 (3088) - common\winsatutilities.cpp:1150: Matching device PnPID is PCI\VEN_1002&DEV_9851&SUBSYS_22CE103C&REV_05
    682875 (3088) - common\winsatutilities.cpp:1126: Index [1]: PNPID = ROOT\BasicDisplay
    682937 (3088) - exe\main.cpp:2615: > DWM Running.
    682937 (3088) - exe\main.cpp:2622: > turning off DWM.
    682937 (3088) - exe\main.cpp:2595: > EMD service will be restored on exit.
    682984 (3088) - exe\syspowertools.cpp:0983: > Read the active power scheme as '381b4222-f694-41f0-9685-ff5bb260df2e'
    682984 (3088) - exe\main.cpp:2923: > power policy saved.
    683171 (3088) - exe\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
    683171 (3088) - exe\main.cpp:2944: > power policy set to maximum.
    684515 (3088) - exe\main.cpp:0867: > WinSAT info: Version=V6.3 Build-9600.16384
    684562 (3088) - exe\main.cpp:1007: > IsOfficial=TRUE  IsFormal=TRUE  IsMoobe=FALSE  RanOverTs=FALSE  RanOnbatteries=FALSE
    684562 (3088) - exe\main.cpp:4125: > Power 'execution' request successfully set.
    684562 (3088) - exe\main.cpp:1852: > Run Assessment features 
    684593 (3088) - common\winsatutilities.cpp:1060: PNPID from DX9 call = PCI\VEN_1002&DEV_9851&SUBSYS_22CE103C&REV_05
    684593 (3088) - common\winsatutilities.cpp:1126: Index [0]: PNPID = PCI\VEN_1002&DEV_9851&SUBSYS_22CE103C&REV_05
    684593 (3088) - common\winsatutilities.cpp:1150: Matching device PnPID is PCI\VEN_1002&DEV_9851&SUBSYS_22CE103C&REV_05
    684593 (3088) - common\winsatutilities.cpp:1126: Index [1]: PNPID = ROOT\BasicDisplay
    684640 (3088) - exe\main.cpp:1852: > Run Assessment dwm -aname DWM -time 10 -fbc 10 -disp off -normalw 1 -alphaw 2 -width 1280 -height 1024 -winwidth C(1144) -winheight C(915) -rendertotex 6 -rtdelta 3 -nolock
    684656 (3088) - d3d\graphicsop.cpp:0195: GraphicsOp::AssessmentThread Launched with priority 0
    696296 (3088) - exe\processresults.cpp:4571: > Wrote video memory bandwidth to the registry 3000430
    696359 (3088) - exe\main.cpp:2138: > DWM Assessment results processing SUCCESS
    696359 (3088) - exe\main.cpp:1852: > Run Assessment d3d -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
    696359 (3088) - d3d\graphicsop.cpp:0195: GraphicsOp::AssessmentThread Launched with priority 0
    702843 (3088) - exe\main.cpp:1852: > Run Assessment d3d -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
    702843 (3088) - d3d\graphicsop.cpp:0195: GraphicsOp::AssessmentThread Launched with priority 0
    709234 (3088) - exe\main.cpp:1852: > Run Assessment d3d -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
    709234 (3088) - d3d\graphicsop.cpp:0195: GraphicsOp::AssessmentThread Launched with priority 0
    716265 (3088) - exe\main.cpp:1852: > Run Assessment d3d -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
    716265 (3088) - d3d\graphicsop.cpp:0195: GraphicsOp::AssessmentThread Launched with priority 0
    723500 (3088) - exe\main.cpp:1852: > Run Assessment d3d -dx10  -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
    723500 (3088) - d3d\graphicsop.cpp:0195: GraphicsOp::AssessmentThread Launched with priority 0
    723500 (3088) - d3d\graphicsop.cpp:0217: Driver is not WDDM 1.1 or WDDM 1.2; aborting DX10 assessment.
    723500 (3088) - exe\main.cpp:1852: > Run Assessment d3d -dx10  -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
    723500 (3088) - d3d\graphicsop.cpp:0195: GraphicsOp::AssessmentThread Launched with priority 0
    723500 (3088) - d3d\graphicsop.cpp:0217: Driver is not WDDM 1.1 or WDDM 1.2; aborting DX10 assessment.
    723500 (3088) - exe\main.cpp:1852: > Run Assessment d3d -dx10  -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta
    3
    723500 (3088) - d3d\graphicsop.cpp:0195: GraphicsOp::AssessmentThread Launched with priority 0
    723500 (3088) - d3d\graphicsop.cpp:0217: Driver is not WDDM 1.1 or WDDM 1.2; aborting DX10 assessment.
    723500 (3088) - exe\main.cpp:1852: > Run Assessment d3d -dx10  -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta
    3
    723500 (3088) - d3d\graphicsop.cpp:0195: GraphicsOp::AssessmentThread Launched with priority 0
    723500 (3088) - d3d\graphicsop.cpp:0217: Driver is not WDDM 1.1 or WDDM 1.2; aborting DX10 assessment.
    723500 (3088) - exe\main.cpp:1852: > Run Assessment d3d -dx10  -aname GeomF4 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 150;200;241 -batchcnt C(50);C(200);C(300) -objs C(12);C(26);C(45) -noalpha -geomf4shader -texpobj C(0)
    -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
    723500 (3088) - d3d\graphicsop.cpp:0195: GraphicsOp::AssessmentThread Launched with priority 0
    723500 (3088) - d3d\graphicsop.cpp:0217: Driver is not WDDM 1.1 or WDDM 1.2; aborting DX10 assessment.
    723500 (3088) - exe\main.cpp:1852: > Run Assessment d3d -dx10  -aname GeomV8 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75;100;120 -batchcnt C(25);C(100);C(150) -objs C(8);C(17);C(29) -noalpha -geomv8shader -texpobj C(0)
    -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
    723500 (3088) - d3d\graphicsop.cpp:0195: GraphicsOp::AssessmentThread Launched with priority 0
    723500 (3088) - d3d\graphicsop.cpp:0217: Driver is not WDDM 1.1 or WDDM 1.2; aborting DX10 assessment.
    723515 (3088) - exe\main.cpp:1852: > Run Assessment d3d -dx10  -aname CBuffer -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75 -batchcnt C(25) -objs C(8) -rendertotex 6 -rtdelta 3 -texpobj C(1) -cbuffershader -cbufa 2 -cbuff
    5 -cbufp 6
    723515 (3088) - d3d\graphicsop.cpp:0195: GraphicsOp::AssessmentThread Launched with priority 0
    723515 (3088) - d3d\graphicsop.cpp:0217: Driver is not WDDM 1.1 or WDDM 1.2; aborting DX10 assessment.
    723515 (3088) - exe\main.cpp:1852: > Run Assessment mfmedia -input C:\Windows\Performance\WinSAT\winsat.wmv -nopmp
    723515 (3088) - mfmedia\mfmediaop.cpp:0508: ps_MFMediaWorkerThread Launched with priority 0
    733562 (3088) - mfmedia\mediaerror.cpp:0137: mfmediatest.cpp @ 1555: 0x800705b4 == ERROR_TIMEOUT
    733578 (3088) - mfmedia\mediaerror.cpp:0137: mfmediatest.cpp @ 1279: 0x800705b4 == ERROR_TIMEOUT
    733578 (3088) - mfmedia\mediaerror.cpp:0137: mfmediatest.cpp @ 388: 0x800705b4 == ERROR_TIMEOUT
    733578 (3088) - mfmedia\mediaerror.cpp:0096:Error: Could not build a topology to decode the input file. (p_BuildTopology)
    733625 (3088) - exe\main.cpp:2157: > mfmedia Assessment FAILED due to an error
    733625 (3088) - exe\main.cpp:4164: > Power request 'execution' successfully cleared.
    733625 (3088) - exe\processresults.cpp:4571: > Wrote video memory bandwidth to the registry 3000430
    733625 (3088) - exe\processresults.cpp:1421: Skipping HighDefPlayback limit check.
    733625 (3088) - exe\processresults.cpp:1547: No D3D10 Subscore. Using D3D9 subscore for final D3D score.
    733640 (3088) - exe\processwinsaterror.cpp:0298: Unspecified error 21 occured.
    733640 (3088) - exe\processwinsaterror.cpp:0319: Writing exit code, cant msg and why msg to registry 
    733796 (3088) - exe\syspowertools.cpp:1015: > Set the active power scheme to 381b4222-f694-41f0-9685-ff5bb260df2e'
    733796 (3088) - exe\main.cpp:2985: > Power state restored.
    733812 (3088) - exe\main.cpp:3000: > Successfully reenabled EMD.
    733859 (3088) - exe\main.cpp:3026: > Composition restarted
    733859 (3088) - exe\watchdog.cpp:0339: Watch dog system shutdown
    733859 (3088) - exe\main.cpp:5204: > exit value = 21.
    i accidentally deleted all the formal assessment.xm file 
    please help me

    Hi,
    I'm agree with amavhsrma, we do need more information about your problem. We couldn't provide any suggestion with single log file.
    Roger Lu
    TechNet Community Support

  • Libmtp error: could not send object info

    I have an HTC One m8, and a laptop running Arch Linux. I installed gvfs-mtp, and my computer detects my phone and the files inside of it. I use the GNOME desktop environment, and it's default file manager.
    If I try to transfer files to my phone, I get an error reading:
    There was an error copying the file into mtp://[usb:003,005]/SD%20card.
    "libmtp error: could not send object info".
    I am not sure how to fix this. i tried reinstalling libmtp and gvfs to no avail.
    I want to be able to connect my phone to my computer, and transfer files through my file manager. Any help would be appreciated..
    Here's some output that may be relevant:
    [saadnajmi@archlaptop ~]$ adb devices
    * daemon not running. starting it now on port 5037 *
    * daemon started successfully *
    List of devices attached
    FA456WM01083 device
    [saadnajmi@archlaptop ~]$ mtp-detect
    Unable to open ~/.mtpz-data for reading, MTPZ disabled.
    libmtp version: 1.1.8
    Listing raw device(s)
    Device 0 (VID=0bb4 and PID=0f63) is a HTC HTC One (MTP+ADB).
    Found 1 device(s):
    HTC: HTC One (MTP+ADB) (0bb4:0f63) @ bus 3, dev 5
    Attempting to connect device(s)
    ignoring libusb_claim_interface() = -6PTP_ERROR_IO: failed to open session, trying again after resetting USB interface
    LIBMTP libusb: Attempt to reset device
    Android device detected, assigning default bug flags
    USB low-level info:
    bcdUSB: 528
    bDeviceClass: 0
    bDeviceSubClass: 0
    bDeviceProtocol: 0
    idVendor: 0bb4
    idProduct: 0f63
    IN endpoint maxpacket: 512 bytes
    OUT endpoint maxpacket: 512 bytes
    Raw device info:
    Bus location: 3
    Device number: 5
    Device entry info:
    Vendor: HTC
    Vendor id: 0x0bb4
    Product: HTC One (MTP+ADB)
    Vendor id: 0x0f63
    Device flags: 0x18008106
    Configuration 0, interface 0, altsetting 0:
    Interface description contains the string "MTP"
    Device recognized as MTP, no further probing.
    Device info:
    Manufacturer: HTC
    Model: HTC One_M8
    Device version: 1.58.502.1
    Serial number: FA456WM01083
    Vendor extension ID: 0x00000006
    Vendor extension description: microsoft.com: 1.0; android.com: 1.0;
    Detected object size: 64 bits
    Extensions:
    microsoft.com: 1.0
    android.com: 1.0
    Supported operations:
    1001: get device info
    1002: Open session
    1003: Close session
    1004: Get storage IDs
    1005: Get storage info
    1006: Get number of objects
    1007: Get object handles
    1008: Get object info
    1009: Get object
    100a: Get thumbnail
    100b: Delete object
    100c: Send object info
    100d: Send object
    1014: Get device property description
    1015: Get device property value
    1016: Set device property value
    1017: Reset device property value
    101b: Get partial object
    9801: Get object properties supported
    9802: Get object property description
    9803: Get object property value
    9804: Set object property value
    9805: Get object property list
    9811: Set object references
    95c1: Get Partial Object (64bit Offset)
    95c2: Send Partial Object
    95c3: Truncate Object
    95c4: Begin Edit Object
    95c5: End Edit Object
    96f0: Unknown (96f0)
    Events supported:
    0x4002
    0x4003
    0x4004
    0x4005
    Device Properties Supported:
    0xd401: Synchronization Partner
    0xd402: Friendly Device Name
    0x5003: Image Size
    Playable File (Object) Types and Object Properties Supported:
    3000: Undefined Type
    dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc04: Object Size UINT64 data type READ ONLY
    dc07: Object File Name STRING data type GET/SET
    dc09: Date Modified STRING data type DATETIME FORM READ ONLY
    dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
    dc44: Name STRING data type READ ONLY
    dc4e: Date Added STRING data type DATETIME FORM READ ONLY
    3001: Association/Directory
    dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc04: Object Size UINT64 data type READ ONLY
    dc07: Object File Name STRING data type GET/SET
    dc09: Date Modified STRING data type DATETIME FORM READ ONLY
    dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
    dc44: Name STRING data type READ ONLY
    dc4e: Date Added STRING data type DATETIME FORM READ ONLY
    3004: Text
    dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc04: Object Size UINT64 data type READ ONLY
    dc07: Object File Name STRING data type GET/SET
    dc09: Date Modified STRING data type DATETIME FORM READ ONLY
    dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
    dc44: Name STRING data type READ ONLY
    dc4e: Date Added STRING data type DATETIME FORM READ ONLY
    3005: HTML
    dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc04: Object Size UINT64 data type READ ONLY
    dc07: Object File Name STRING data type GET/SET
    dc09: Date Modified STRING data type DATETIME FORM READ ONLY
    dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
    dc44: Name STRING data type READ ONLY
    dc4e: Date Added STRING data type DATETIME FORM READ ONLY
    3008: MS Wave
    dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc04: Object Size UINT64 data type READ ONLY
    dc07: Object File Name STRING data type GET/SET
    dc09: Date Modified STRING data type DATETIME FORM READ ONLY
    dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
    dc44: Name STRING data type READ ONLY
    dce0: Display Name STRING data type READ ONLY
    dc4e: Date Added STRING data type DATETIME FORM READ ONLY
    dc46: Artist STRING data type READ ONLY
    dc9a: Album Name STRING data type READ ONLY
    dc9b: Album Artist STRING data type READ ONLY
    dc8b: Track UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc99: Original Release Date STRING data type DATETIME FORM READ ONLY
    dc89: Duration UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc8c: Genre STRING data type READ ONLY
    dc96: Composer STRING data type READ ONLY
    de93: Sample Rate UINT32 data type range: MIN 0, MAX 48000, STEP 50 GET/SET
    de94: Number Of Channels UINT16 data type ANY 16BIT VALUE form READ ONLY
    de99: Audio WAVE Codec UINT32 data type enumeration: 0, 1, 2, 3, 8, 9, 11, 49, 50, 80, 85, 352, 353, 354, 355, 356, 41222, GET/SET
    de9a: Audio Bit Rate UINT32 data type range: MIN 0, MAX 384000, STEP 1 GET/SET
    3009: MP3
    dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc04: Object Size UINT64 data type READ ONLY
    dc07: Object File Name STRING data type GET/SET
    dc09: Date Modified STRING data type DATETIME FORM READ ONLY
    dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
    dc44: Name STRING data type READ ONLY
    dce0: Display Name STRING data type READ ONLY
    dc4e: Date Added STRING data type DATETIME FORM READ ONLY
    dc46: Artist STRING data type READ ONLY
    dc9a: Album Name STRING data type READ ONLY
    dc9b: Album Artist STRING data type READ ONLY
    dc8b: Track UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc99: Original Release Date STRING data type DATETIME FORM READ ONLY
    dc89: Duration UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc8c: Genre STRING data type READ ONLY
    dc96: Composer STRING data type READ ONLY
    de93: Sample Rate UINT32 data type range: MIN 0, MAX 48000, STEP 50 GET/SET
    de94: Number Of Channels UINT16 data type ANY 16BIT VALUE form READ ONLY
    de99: Audio WAVE Codec UINT32 data type enumeration: 0, 1, 2, 3, 8, 9, 11, 49, 50, 80, 85, 352, 353, 354, 355, 356, 41222, GET/SET
    de9a: Audio Bit Rate UINT32 data type range: MIN 0, MAX 384000, STEP 1 GET/SET
    300b: MPEG
    dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc04: Object Size UINT64 data type READ ONLY
    dc07: Object File Name STRING data type GET/SET
    dc09: Date Modified STRING data type DATETIME FORM READ ONLY
    dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
    dc44: Name STRING data type READ ONLY
    dce0: Display Name STRING data type READ ONLY
    dc4e: Date Added STRING data type DATETIME FORM READ ONLY
    dc46: Artist STRING data type READ ONLY
    dc9a: Album Name STRING data type READ ONLY
    dc89: Duration UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc48: Description STRING data type READ ONLY
    de93: Sample Rate UINT32 data type range: MIN 0, MAX 48000, STEP 50 GET/SET
    de94: Number Of Channels UINT16 data type ANY 16BIT VALUE form READ ONLY
    de99: Audio WAVE Codec UINT32 data type enumeration: 0, 1, 2, 3, 8, 9, 11, 49, 50, 80, 85, 352, 353, 354, 355, 356, 41222, GET/SET
    de9a: Audio Bit Rate UINT32 data type range: MIN 0, MAX 384000, STEP 1 GET/SET
    dc8b: Track UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc99: Original Release Date STRING data type DATETIME FORM READ ONLY
    dc8c: Genre STRING data type READ ONLY
    dc87: Width UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc88: Height UINT32 data type ANY 32BIT VALUE form READ ONLY
    de9b: Video Four CC Codec UINT32 data type enumeration: 0, 859189832, 958804552, 1195724877, 827739479, 844516695, 861293911, GET/SET
    de9c: Video Bit Rate UINT32 data type range: MIN 0, MAX 2000000000, STEP 1 GET/SET
    de9d: Frames Per Thousand Seconds UINT32 data type range: MIN 0, MAX 60000, STEP 1 GET/SET
    3801: JPEG
    dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc04: Object Size UINT64 data type READ ONLY
    dc07: Object File Name STRING data type GET/SET
    dc09: Date Modified STRING data type DATETIME FORM READ ONLY
    dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
    dc44: Name STRING data type READ ONLY
    dce0: Display Name STRING data type READ ONLY
    dc4e: Date Added STRING data type DATETIME FORM READ ONLY
    dc48: Description STRING data type READ ONLY
    3802: TIFF EP
    dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc04: Object Size UINT64 data type READ ONLY
    dc07: Object File Name STRING data type GET/SET
    dc09: Date Modified STRING data type DATETIME FORM READ ONLY
    dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
    dc44: Name STRING data type READ ONLY
    dc4e: Date Added STRING data type DATETIME FORM READ ONLY
    3804: BMP
    dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc04: Object Size UINT64 data type READ ONLY
    dc07: Object File Name STRING data type GET/SET
    dc09: Date Modified STRING data type DATETIME FORM READ ONLY
    dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
    dc44: Name STRING data type READ ONLY
    dce0: Display Name STRING data type READ ONLY
    dc4e: Date Added STRING data type DATETIME FORM READ ONLY
    dc48: Description STRING data type READ ONLY
    3807: GIF
    dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc04: Object Size UINT64 data type READ ONLY
    dc07: Object File Name STRING data type GET/SET
    dc09: Date Modified STRING data type DATETIME FORM READ ONLY
    dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
    dc44: Name STRING data type READ ONLY
    dce0: Display Name STRING data type READ ONLY
    dc4e: Date Added STRING data type DATETIME FORM READ ONLY
    dc48: Description STRING data type READ ONLY
    3808: JFIF
    dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc04: Object Size UINT64 data type READ ONLY
    dc07: Object File Name STRING data type GET/SET
    dc09: Date Modified STRING data type DATETIME FORM READ ONLY
    dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
    dc44: Name STRING data type READ ONLY
    dc4e: Date Added STRING data type DATETIME FORM READ ONLY
    380b: PNG
    dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc04: Object Size UINT64 data type READ ONLY
    dc07: Object File Name STRING data type GET/SET
    dc09: Date Modified STRING data type DATETIME FORM READ ONLY
    dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
    dc44: Name STRING data type READ ONLY
    dce0: Display Name STRING data type READ ONLY
    dc4e: Date Added STRING data type DATETIME FORM READ ONLY
    dc48: Description STRING data type READ ONLY
    380d: TIFF
    dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc04: Object Size UINT64 data type READ ONLY
    dc07: Object File Name STRING data type GET/SET
    dc09: Date Modified STRING data type DATETIME FORM READ ONLY
    dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
    dc44: Name STRING data type READ ONLY
    dc4e: Date Added STRING data type DATETIME FORM READ ONLY
    b901: WMA
    dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc04: Object Size UINT64 data type READ ONLY
    dc07: Object File Name STRING data type GET/SET
    dc09: Date Modified STRING data type DATETIME FORM READ ONLY
    dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
    dc44: Name STRING data type READ ONLY
    dce0: Display Name STRING data type READ ONLY
    dc4e: Date Added STRING data type DATETIME FORM READ ONLY
    dc46: Artist STRING data type READ ONLY
    dc9a: Album Name STRING data type READ ONLY
    dc9b: Album Artist STRING data type READ ONLY
    dc8b: Track UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc99: Original Release Date STRING data type DATETIME FORM READ ONLY
    dc89: Duration UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc8c: Genre STRING data type READ ONLY
    dc96: Composer STRING data type READ ONLY
    de93: Sample Rate UINT32 data type range: MIN 0, MAX 48000, STEP 50 GET/SET
    de94: Number Of Channels UINT16 data type ANY 16BIT VALUE form READ ONLY
    de99: Audio WAVE Codec UINT32 data type enumeration: 0, 1, 2, 3, 8, 9, 11, 49, 50, 80, 85, 352, 353, 354, 355, 356, 41222, GET/SET
    de9a: Audio Bit Rate UINT32 data type range: MIN 0, MAX 384000, STEP 1 GET/SET
    b902: OGG
    dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc04: Object Size UINT64 data type READ ONLY
    dc07: Object File Name STRING data type GET/SET
    dc09: Date Modified STRING data type DATETIME FORM READ ONLY
    dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
    dc44: Name STRING data type READ ONLY
    dce0: Display Name STRING data type READ ONLY
    dc4e: Date Added STRING data type DATETIME FORM READ ONLY
    dc46: Artist STRING data type READ ONLY
    dc9a: Album Name STRING data type READ ONLY
    dc9b: Album Artist STRING data type READ ONLY
    dc8b: Track UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc99: Original Release Date STRING data type DATETIME FORM READ ONLY
    dc89: Duration UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc8c: Genre STRING data type READ ONLY
    dc96: Composer STRING data type READ ONLY
    de93: Sample Rate UINT32 data type range: MIN 0, MAX 48000, STEP 50 GET/SET
    de94: Number Of Channels UINT16 data type ANY 16BIT VALUE form READ ONLY
    de99: Audio WAVE Codec UINT32 data type enumeration: 0, 1, 2, 3, 8, 9, 11, 49, 50, 80, 85, 352, 353, 354, 355, 356, 41222, GET/SET
    de9a: Audio Bit Rate UINT32 data type range: MIN 0, MAX 384000, STEP 1 GET/SET
    b903: AAC
    dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc04: Object Size UINT64 data type READ ONLY
    dc07: Object File Name STRING data type GET/SET
    dc09: Date Modified STRING data type DATETIME FORM READ ONLY
    dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
    dc44: Name STRING data type READ ONLY
    dce0: Display Name STRING data type READ ONLY
    dc4e: Date Added STRING data type DATETIME FORM READ ONLY
    dc46: Artist STRING data type READ ONLY
    dc9a: Album Name STRING data type READ ONLY
    dc9b: Album Artist STRING data type READ ONLY
    dc8b: Track UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc99: Original Release Date STRING data type DATETIME FORM READ ONLY
    dc89: Duration UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc8c: Genre STRING data type READ ONLY
    dc96: Composer STRING data type READ ONLY
    de93: Sample Rate UINT32 data type range: MIN 0, MAX 48000, STEP 50 GET/SET
    de94: Number Of Channels UINT16 data type ANY 16BIT VALUE form READ ONLY
    de99: Audio WAVE Codec UINT32 data type enumeration: 0, 1, 2, 3, 8, 9, 11, 49, 50, 80, 85, 352, 353, 354, 355, 356, 41222, GET/SET
    de9a: Audio Bit Rate UINT32 data type range: MIN 0, MAX 384000, STEP 1 GET/SET
    b982: MP4
    dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc04: Object Size UINT64 data type READ ONLY
    dc07: Object File Name STRING data type GET/SET
    dc09: Date Modified STRING data type DATETIME FORM READ ONLY
    dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
    dc44: Name STRING data type READ ONLY
    dc4e: Date Added STRING data type DATETIME FORM READ ONLY
    b983: MP2
    dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc04: Object Size UINT64 data type READ ONLY
    dc07: Object File Name STRING data type GET/SET
    dc09: Date Modified STRING data type DATETIME FORM READ ONLY
    dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
    dc44: Name STRING data type READ ONLY
    dc4e: Date Added STRING data type DATETIME FORM READ ONLY
    b984: 3GP
    dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc04: Object Size UINT64 data type READ ONLY
    dc07: Object File Name STRING data type GET/SET
    dc09: Date Modified STRING data type DATETIME FORM READ ONLY
    dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
    dc44: Name STRING data type READ ONLY
    dce0: Display Name STRING data type READ ONLY
    dc4e: Date Added STRING data type DATETIME FORM READ ONLY
    dc46: Artist STRING data type READ ONLY
    dc9a: Album Name STRING data type READ ONLY
    dc89: Duration UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc48: Description STRING data type READ ONLY
    de93: Sample Rate UINT32 data type range: MIN 0, MAX 48000, STEP 50 GET/SET
    de94: Number Of Channels UINT16 data type ANY 16BIT VALUE form READ ONLY
    de99: Audio WAVE Codec UINT32 data type enumeration: 0, 1, 2, 3, 8, 9, 11, 49, 50, 80, 85, 352, 353, 354, 355, 356, 41222, GET/SET
    de9a: Audio Bit Rate UINT32 data type range: MIN 0, MAX 384000, STEP 1 GET/SET
    dc8b: Track UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc99: Original Release Date STRING data type DATETIME FORM READ ONLY
    dc8c: Genre STRING data type READ ONLY
    dc87: Width UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc88: Height UINT32 data type ANY 32BIT VALUE form READ ONLY
    de9b: Video Four CC Codec UINT32 data type enumeration: 0, 859189832, 958804552, 1195724877, 827739479, 844516695, 861293911, GET/SET
    de9c: Video Bit Rate UINT32 data type range: MIN 0, MAX 2000000000, STEP 1 GET/SET
    de9d: Frames Per Thousand Seconds UINT32 data type range: MIN 0, MAX 60000, STEP 1 GET/SET
    ba05: Abstract Audio Video Playlist
    dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc04: Object Size UINT64 data type READ ONLY
    dc07: Object File Name STRING data type GET/SET
    dc09: Date Modified STRING data type DATETIME FORM READ ONLY
    dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
    dc44: Name STRING data type READ ONLY
    dc4e: Date Added STRING data type DATETIME FORM READ ONLY
    ba10: WPL Playlist
    dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc04: Object Size UINT64 data type READ ONLY
    dc07: Object File Name STRING data type GET/SET
    dc09: Date Modified STRING data type DATETIME FORM READ ONLY
    dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
    dc44: Name STRING data type READ ONLY
    dc4e: Date Added STRING data type DATETIME FORM READ ONLY
    ba11: M3U Playlist
    dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc04: Object Size UINT64 data type READ ONLY
    dc07: Object File Name STRING data type GET/SET
    dc09: Date Modified STRING data type DATETIME FORM READ ONLY
    dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
    dc44: Name STRING data type READ ONLY
    dc4e: Date Added STRING data type DATETIME FORM READ ONLY
    ba14: PLS Playlist
    dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc04: Object Size UINT64 data type READ ONLY
    dc07: Object File Name STRING data type GET/SET
    dc09: Date Modified STRING data type DATETIME FORM READ ONLY
    dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
    dc44: Name STRING data type READ ONLY
    dc4e: Date Added STRING data type DATETIME FORM READ ONLY
    ba82: XMLDocument
    dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc04: Object Size UINT64 data type READ ONLY
    dc07: Object File Name STRING data type GET/SET
    dc09: Date Modified STRING data type DATETIME FORM READ ONLY
    dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
    dc44: Name STRING data type READ ONLY
    dc4e: Date Added STRING data type DATETIME FORM READ ONLY
    b906: FLAC
    dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc04: Object Size UINT64 data type READ ONLY
    dc07: Object File Name STRING data type GET/SET
    dc09: Date Modified STRING data type DATETIME FORM READ ONLY
    dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
    dc44: Name STRING data type READ ONLY
    dc4e: Date Added STRING data type DATETIME FORM READ ONLY
    b981: WMV
    dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc04: Object Size UINT64 data type READ ONLY
    dc07: Object File Name STRING data type GET/SET
    dc09: Date Modified STRING data type DATETIME FORM READ ONLY
    dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
    dc44: Name STRING data type READ ONLY
    dce0: Display Name STRING data type READ ONLY
    dc4e: Date Added STRING data type DATETIME FORM READ ONLY
    dc46: Artist STRING data type READ ONLY
    dc9a: Album Name STRING data type READ ONLY
    dc89: Duration UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc48: Description STRING data type READ ONLY
    de93: Sample Rate UINT32 data type range: MIN 0, MAX 48000, STEP 50 GET/SET
    de94: Number Of Channels UINT16 data type ANY 16BIT VALUE form READ ONLY
    de99: Audio WAVE Codec UINT32 data type enumeration: 0, 1, 2, 3, 8, 9, 11, 49, 50, 80, 85, 352, 353, 354, 355, 356, 41222, GET/SET
    de9a: Audio Bit Rate UINT32 data type range: MIN 0, MAX 384000, STEP 1 GET/SET
    dc8b: Track UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc99: Original Release Date STRING data type DATETIME FORM READ ONLY
    dc8c: Genre STRING data type READ ONLY
    dc87: Width UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc88: Height UINT32 data type ANY 32BIT VALUE form READ ONLY
    de9b: Video Four CC Codec UINT32 data type enumeration: 0, 859189832, 958804552, 1195724877, 827739479, 844516695, 861293911, GET/SET
    de9c: Video Bit Rate UINT32 data type range: MIN 0, MAX 2000000000, STEP 1 GET/SET
    de9d: Frames Per Thousand Seconds UINT32 data type range: MIN 0, MAX 60000, STEP 1 GET/SET
    300a: MS AVI
    dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc04: Object Size UINT64 data type READ ONLY
    dc07: Object File Name STRING data type GET/SET
    dc09: Date Modified STRING data type DATETIME FORM READ ONLY
    dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
    dc44: Name STRING data type READ ONLY
    dc4e: Date Added STRING data type DATETIME FORM READ ONLY
    300c: ASF
    dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc04: Object Size UINT64 data type READ ONLY
    dc07: Object File Name STRING data type GET/SET
    dc09: Date Modified STRING data type DATETIME FORM READ ONLY
    dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
    dc44: Name STRING data type READ ONLY
    dc4e: Date Added STRING data type DATETIME FORM READ ONLY
    ba83: Microsoft Word Document
    dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc04: Object Size UINT64 data type READ ONLY
    dc07: Object File Name STRING data type GET/SET
    dc09: Date Modified STRING data type DATETIME FORM READ ONLY
    dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
    dc44: Name STRING data type READ ONLY
    dc4e: Date Added STRING data type DATETIME FORM READ ONLY
    ba85: Microsoft Excel Spreadsheet (.xls)
    dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc04: Object Size UINT64 data type READ ONLY
    dc07: Object File Name STRING data type GET/SET
    dc09: Date Modified STRING data type DATETIME FORM READ ONLY
    dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
    dc44: Name STRING data type READ ONLY
    dc4e: Date Added STRING data type DATETIME FORM READ ONLY
    ba86: Microsoft Powerpoint (.ppt)
    dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
    dc04: Object Size UINT64 data type READ ONLY
    dc07: Object File Name STRING data type GET/SET
    dc09: Date Modified STRING data type DATETIME FORM READ ONLY
    dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
    dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
    dc44: Name STRING data type READ ONLY
    dc4e: Date Added STRING data type DATETIME FORM READ ONLY
    Storage Devices:
    StorageID: 0x00020001
    StorageType: 0x0004 removable RAM storage
    FilesystemType: 0x0002 generic hierarchical
    AccessCapability: 0x0000 read/write
    MaxCapacity: 31896633344
    FreeSpaceInBytes: 31628312576
    FreeSpaceInObjects: 1073741824
    StorageDescription: SD card
    VolumeIdentifier: ##storage##ext_sd
    StorageID: 0x00010001
    StorageType: 0x0003 fixed RAM storage
    FilesystemType: 0x0002 generic hierarchical
    AccessCapability: 0x0000 read/write
    MaxCapacity: 26667683840
    FreeSpaceInBytes: 9365225472
    FreeSpaceInObjects: 1073741824
    StorageDescription: Internal storage
    VolumeIdentifier: ##storage##emulated##0
    Special directories:
    Default music folder: 0xffffffff
    Default playlist folder: 0xffffffff
    Default picture folder: 0xffffffff
    Default video folder: 0xffffffff
    Default organizer folder: 0xffffffff
    Default zencast folder: 0xffffffff
    Default album folder: 0xffffffff
    Default text folder: 0xffffffff
    MTP-specific device properties:
    Friendly name: (NULL)
    Synchronization partner: (NULL)
    libmtp supported (playable) filetypes:
    Folder
    Text file
    HTML file
    RIFF WAVE file
    ISO MPEG-1 Audio Layer 3
    MPEG video stream
    JPEG file
    BMP bitmap file
    GIF bitmap file
    JFIF file
    Portable Network Graphics
    TIFF bitmap file
    Microsoft Windows Media Audio
    Ogg container format
    Advanced Audio Coding (AAC)/MPEG-2 Part 7/MPEG-4 Part 3
    MPEG-4 Part 14 Container Format (Audio+Video Emphasis)
    ISO MPEG-1 Audio Layer 2
    Abstract Playlist file
    XML file
    Free Lossless Audio Codec (FLAC)
    Microsoft Windows Media Video
    Audio Video Interleave
    Microsoft Advanced Systems Format
    DOC file
    XLS file
    PPT file
    OK.

    i got the solution...........thanks every one

  • Error: Could not find compiled resource bundle 'components' for locale 'en_US'

    We are porting a fairly large body of Flex3 code developed under FlexBuilder 3 to Flex4 under FlashBuilder 4.  Most of the conversion appears to be working fine, with one exception.  When I launch the Flex4 version, all my data interchanges with the server works.  Just as it is about to show the UI, the following error occurs:
         Error: Could not find compiled resource bundle 'components' for locale 'en_US'
    I am actually using a locale of fr_FR, but I assume it couldn't find that, reverted to en_US, failed again and then barfed.  If I look in
         ~Adobe Flash Builder 4\sdks\4.0.0\frameworks\locale\fr_FR
    I see a lot of swc files, and of course no 'components.swc'.  I believe the problem is that our Flex3 code is using mx components, and the compatibility mode is not properly handling it for some reason.  I think this is mostly from our in-house UI library.  The properties for that library (and for my main app I am testing now) have:
         - Use default SDK (currently "Flex 4.0")
         - Use Flex 3 compability mode
         - Use minimum version (Flash Player) required by the Flex SDK
         - Enable strict type checking
         - Enable warnings
    I also tried putting the compatibility flag in the mxmlc compile line, with no change in behavior.  This project is built by the following script:
    ruby scripts/concat_properties.rb -o resources.properties ^
         src/main/flex/locale/fr_common/res_myname_fr_common.properties ^
         src/main/flex/locale/fr_common/scout/res_myname_scout_fr_common.properties ^
         src/main/flex/locale/fr_fr/res_myname_fr_fr.properties ^
         ../../scout/common/src/locale/fr_common/mypals/resources.properties
    mxmlc -locale=fr_FR -source-path=. ^
         -compatibility-version=3.0.0. ^
         -static-rsls=true ^
         -include-resource-bundles=resources ^
         -output src/main/resources/bundles/mypals/fr_fr_resources.swf
    copy src\main\resources\bundles\mypals\fr_fr_resources.swf ^
         bin-debug\bundles\mypals
    What have I missed???

    You have two posts. I will try to answer each completely.  Second one first. You say I should change my build to include the framework resources.  I am afraid I am not sure which and what to do there.  We combine all our properties file into one large one, then use the following build line:
    mxmlc -locale=fr_FR,en_US -source-path=. ^
         -compatibility-version=3.0.0. ^
         -static-rsls=true ^
         -include-resource-bundles=resources ^
         -output src/main/resources/bundles/mypals/fr_fr_resources.swf
    I am assuming you are telling me to change the "-include-resource-bundles" line, but what to add?  The "sdks\4.0.0\frameworks\locale\en_US" holds 13 swf files.  I tried adding that entire folder (along with the fr_FR folder) to the project library path (in the project properties dialog), but that made no change.  I also tried reverting the library path tab back to "MX Only" instead of "MX + Spark", but again no change.
    ====================
    For your first message, I did a search for 'spark' in the entire project.  It only existed on 3 lines, each at the start of css files:
        @namespace s "library://ns.adobe.com/flex/spark";
    I had put those in based on reading needed changes to naming in CSS.  Since I was not actually using any spark ('s') components yet, I removed these lines.  The entire project now does not have the word 'spark' anywhere in it. No change in behavior (as I expected).
    I did a search for "s:" throughout the project.  That does exist in probably 100 places, but all are legitimate. Things like (xmlns:mx="http://www.adobe.com/2006/mxml") or variable names ("var matches:Object").  No reference to any s: object.  (While on the topic, why does FlashBuilder still not have a "whole word" box to limit searches??).
    Note that when I first reported this problem, the compiler was set to ONLY support fr_FR.  In fighting this, I changed it to "en_US,fr_FR" hoping that would tell the compiler to load whatever en_US items it was looking for.  We really do not want any English support in this version. (We do have another SWF created with only support for en_US, and another for en_UK, etc.  Each language is a separate node on our server, so there is no need to mix & match at runtime)
    The console shows a lot of swf loads that I do not understand...
    The console output shows (my comments after ==> indicator)
    [SWF] C:\ConnectedProducts\common-web\myname\bin-debug\myname.swf - 2,229,992 bytes after decompression
                 ==> our locale is set here, after the above load and before the next line
    Look for name file at: ./data/fr_fr/names.csv
    [SWF] C:\ConnectedProducts\common-web\myname\bin-debug\myname.swf - 21,200 bytes after decompression
    Loaded 2278 names.       ==> indicates successful load of data retrieved from server
    Loaded 154 bad words     ==> our second data set has been retrieved and loaded
    [SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 58,777 bytes after decompression
    [SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 322,606 bytes after decompression
    [SWF] C:\ConnectedProducts\common-web\myname\bin-debug\bundles\mypals\fr_fr_resources.swf - 595,025 bytes after decompression
    [SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 202,168 bytes after decompression
        ==> not sure what this next warning means.  I'm guessing I will later have to research it and return to 'secure' comm with server, but I'm ignoring for now
    Warning: Ignoring 'secure' attribute in policy file from http://fpdownload.adobe.com/pub/swz/crossdomain.xml.  The 'secure' attribute is only permitted in HTTPS and socket policy files.  See http://www.adobe.com/go/strict_policy_files for details.
    Resource bundle loaded for locale fr_fr  ==> at this point, we appear to have our French assets loaded successfully
    [SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 202,168 bytes after decompression
    [SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 1,303,976 bytes after decompression
    [Unload SWF] C:\ConnectedProducts\common-web\myname\bin-debug\myname.swf  ==> some runs see this, but others do not. I expect it is a timing issue of whether it is reached or not before the crash
    [SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 794,898 bytes after decompression
    [SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 194,635 bytes after decompression
    [SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 261,589 bytes after decompression
    ==> everything looks fine up to here.  This is then when the third call to installCompiledResourceBundles occurs
    Error: Could not find compiled resource bundle 'components' for locale 'en_US'.
        at mx.resources::ResourceManagerImpl/installCompiledResourceBundle()[E:\dev\4.0.0\frameworks \projects\framework\src\mx\resources\ResourceManagerImpl.as:340]
        at mx.resources::ResourceManagerImpl/installCompiledResourceBundles()[E:\dev\4.0.0\framework s\projects\framework\src\mx\resources\ResourceManagerImpl.as:269]
        at mx.core::FlexModuleFactory/installCompiledResourceBundles()
        at mx.core::FlexModuleFactory/docFrameHandler()
        at mx.core::FlexModuleFactory/docFrameListener()

  • Log Reader Agent error "could not execute sp_replcmds' and causes stack dump

    Publisher/Subscriber db:  SQL 2008 R2, 2000 compatability mode
    Distributor database is on separate server.
    (note:  There is another database on this instance that is running replication without error, it is not in compatibility mode)
    After snapshot agent finishes, the log reader agent starts and fails immediately with this error in the Agent Job.
    Then I get a SEV20 error and stack dump in the error logs.
    Date  6/12/2014 3:12:26 PM
    Log  Job History (SERVER\INSTANCE-DBNAME-43)
    Step ID  2
    Server  ######RT02
    Job Name  SERVER\INSTANCE-DBNAME-43
    Step Name  Run agent.
    Duration  00:00:01
    Sql Severity  0
    Sql Message ID  0
    Operator Emailed  
    Operator Net sent  
    Operator Paged  
    Retries Attempted  0
    Message
    2014-06-12 20:12:26.302 Copyright (c) 2008 Microsoft Corporation
    2014-06-12 20:12:26.302 Microsoft SQL Server Replication Agent: logread
    2014-06-12 20:12:26.302
    2014-06-12 20:12:26.302 The timestamps prepended to the output lines are expressed in terms of UTC time.
    2014-06-12 20:12:26.302 User-specified agent parameter values:
       -Publisher SERVER\INSTANCE
       -PublisherDB DBNAME
       -Distributor ######RT02
       -DistributorSecurityMode 1
       -Continuous
       -XJOBID 0x8958DF32810C6849B28A037A8FF8DD92
       -XJOBNAME SERVER\INSTANCE-DBNAME-43
       -XSTEPID 2
       -XSUBSYSTEM LogReader
       -XSERVER SERVER\INSTANCE
       -XCMDLINE 0
       -XCancelEventHandle 0000000000000F98
       -XParentProcessHandle 0000000000000F34
    2014-06-12 20:12:26.459 Parameter values obtained from agent profile:
       -pollinginterval 5000
       -historyverboselevel 1
       -logintimeout 15
       -querytimeout 1800
       -readbatchsize 500
       -readbatchsize 500000
    2014-06-12 20:12:26.493 Status: 4096, code: 20024, text: 'Initializing'.
    2014-06-12 20:12:26.493 The agent is running. Use Replication Monitor to view the details of this agent session.
    2014-06-12 20:12:27.885 Status: 0, code: 20011, text: 'The process could not execute 'sp_replcmds' on 'SERVER\INSTANCE'.'.
    2014-06-12 20:12:27.886 The process could not execute 'sp_replcmds' on 'SERVER\INSTANCE'.
    2014-06-12 20:12:27.886 Status: 0, code: 21, text: 'Warning: Fatal error 3624 occurred at Jun 12 2014  3:12PM. Note the error and time, and contact your system administrator.'.
    2014-06-12 20:12:27.886 Status: 0, code: 22037, text: 'The process could not execute 'sp_replcmds' on 'SERVER\INSTANCE'.'.
    I've tried removing replication and setting it back up again, restarting SQL, and restarting the server itself.
    Let me know if you need any more information to help troubleshoot.  Thanks.
    Please help, thanks. 

    Hi,
    Enable Verbose logging and check the results.
    Execute following commands: -Output C:\Temp\OUTPUTFILE.txt –Outputverboselevel 2.
    Please refer following KB article for your reference -
    http://support.microsoft.com/kb/q312292/
    Thanks.
    Tracy Cai
    TechNet Community Support

  • Tns error could not connect to database but can tnsping and sqlplus

    The new install OBIEE 10.1.3.4.1, with two Linux RH/64 Bit servers set up and running, but can't get to 11g database when running reports.
    Error: nqsError 17001 Oracle Error Code 12154, message ORA-12154: TNS could not resolve the connect identifier specified at OCI call OCIServerAttach. nQSError 17014 could not connect to Oracle database
    Server 1 BI Server
    BI server is running.
    oc4j is running.
    jdk is installed
    /setup/user.sh variables and libs set
    .bash_profile variables and libs set
    oracle client installed with lib32
    can tnsping the database from here using SID
    can sqplus login to the database from here
    changed connection pool offiline and uploaded new .rpd
    this script does not work /setup . sa-cli.sh to test client, nothing happens, also unable to connect to BI Server in online mode from Windows client 32bit.
    Server 2 Presentation Server
    saw server is running
    set odbc AnalyticsWeb DSN to point to BI Server 1
    Since I can ping and connect with tns, why is presentation server throwing errors?
    Thanks for the help

    Copy the tnsname.ora file from Oracle Database serve onto the client PC.
    Path: %Oracle_home%\net80\admin\
    Send me a mail if there is any other issues
    Regards
    Oluseyi Funmi Oduberu
    Oracle Consultant
    Email:[email protected]
    Hi,
    I am a tech at a failing company. Unfortuneatly some users still need ADI installed and working with very limited resources to troubleshoot oracle. I am getting the error - ( Could not connect to the database - ora-12545: tns:name lookup failure )when the user tries to log on to ADI. Any suggestions? I would really appreciate it. We are on Windows NT on an NT network. Oracle 8.05 client installed and ADI 6.0.
    Thanks, Mary

Maybe you are looking for

  • File system error while creating a virtual server

    Hi I get the following error when I create a virtual server: File System Error: Could not create directory /opt/SUNWwbsvr/https-web-content (permission denied) The admin server is owned by root but the instance that I want to create should be owned b

  • HT3228 I have a hotmail account on my iPhone 5 and I wondered if I could sync this to my new iPad 2?

    I have a hotmail email account that I use in my iPhone 5, can I this to my new iPad 2?

  • OSX 10.7.5

    I have a late 2006 iMac that uses OSX 10.7.5. My system doesn't fit the new specs for 10.8 and above. Hence I can't download iTunes Producer 3.0. I have been working on my book for the last 18 months and am ready to upload the finished book. Apart fr

  • Windows vs thinkpad power manager

    hi, as one can see, power adjustments can be made in 'thinkpad power manager' but also in windows itself (configurationmanagement) : what is preferrable ? since i and many others experience the fan noise problem ; and is it so that configuring in Win

  • Maximising windows and important Keyboard Shortcuts in Mountain Lion

    Hi - just two questions related to the behaviour of Mac OS X Mountain Lion. When you minimise a window in Mac OS X, it shrinks down and sits next to the trash. When you want to access it again, you simply click on it and it is maximised again. Can an