Log Reader Agent error "could not execute sp_replcmds' and causes stack dump

Publisher/Subscriber db: SQL 2008 R2, 2000 compatability mode
Distributor database is on separate server.
(note: There is another database on this instance that is running replication without error, it is not in compatibility mode)
After snapshot agent finishes, the log reader agent starts and fails immediately with this error in the Agent Job.
Then I get a SEV20 error and stack dump in the error logs.
Date  6/12/2014 3:12:26 PM
Log  Job History (SERVER\INSTANCE-DBNAME-43)
Step ID  2
Server  ######RT02
Job Name  SERVER\INSTANCE-DBNAME-43
Step Name  Run agent.
Duration  00:00:01
Sql Severity  0
Sql Message ID  0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted  0
Message
2014-06-12 20:12:26.302 Copyright (c) 2008 Microsoft Corporation
2014-06-12 20:12:26.302 Microsoft SQL Server Replication Agent: logread
2014-06-12 20:12:26.302
2014-06-12 20:12:26.302 The timestamps prepended to the output lines are expressed in terms of UTC time.
2014-06-12 20:12:26.302 User-specified agent parameter values:
   -Publisher SERVER\INSTANCE
   -PublisherDB DBNAME
   -Distributor ######RT02
   -DistributorSecurityMode 1
   -Continuous
   -XJOBID 0x8958DF32810C6849B28A037A8FF8DD92
   -XJOBNAME SERVER\INSTANCE-DBNAME-43
   -XSTEPID 2
   -XSUBSYSTEM LogReader
   -XSERVER SERVER\INSTANCE
   -XCMDLINE 0
   -XCancelEventHandle 0000000000000F98
   -XParentProcessHandle 0000000000000F34
2014-06-12 20:12:26.459 Parameter values obtained from agent profile:
   -pollinginterval 5000
   -historyverboselevel 1
   -logintimeout 15
   -querytimeout 1800
   -readbatchsize 500
   -readbatchsize 500000
2014-06-12 20:12:26.493 Status: 4096, code: 20024, text: 'Initializing'.
2014-06-12 20:12:26.493 The agent is running. Use Replication Monitor to view the details of this agent session.
2014-06-12 20:12:27.885 Status: 0, code: 20011, text: 'The process could not execute 'sp_replcmds' on 'SERVER\INSTANCE'.'.
2014-06-12 20:12:27.886 The process could not execute 'sp_replcmds' on 'SERVER\INSTANCE'.
2014-06-12 20:12:27.886 Status: 0, code: 21, text: 'Warning: Fatal error 3624 occurred at Jun 12 2014 3:12PM. Note the error and time, and contact your system administrator.'.
2014-06-12 20:12:27.886 Status: 0, code: 22037, text: 'The process could not execute 'sp_replcmds' on 'SERVER\INSTANCE'.'.
I've tried removing replication and setting it back up again, restarting SQL, and restarting the server itself.
Let me know if you need any more information to help troubleshoot. Thanks.
Please help, thanks.

Hi,
Enable Verbose logging and check the results.
Execute following commands: -Output C:\Temp\OUTPUTFILE.txt –Outputverboselevel 2.
Please refer following KB article for your reference -
http://support.microsoft.com/kb/q312292/
Thanks.
Tracy Cai
TechNet Community Support

Similar Messages

WJView Error could not execute main

How to fix (WJView Error)Error: Could not execute Main : The system
cannot find the file specified.
This message started popping up when I log on to my machine after downloading limewire which also grabbed JavaTM Runtime Environment. How do I fix this? I just had a feeling, downloading a file share would be a problem. Java has never been a problem before it was on my pc win 98 se I was prompt to download it along with lime wire. Help Thank you.

I downloaded..spybot..a spyware detector program, & it found & anilated a program called..ebates moe money maker,weather,some other insideos piece of spyware garbage.fixed my problem pronto!:)ebates moe money maker attaches to u'r start up, will give u probs until u remove it entirely:) Spybot is a free program & grabs lots of other 'nasties u never knew u had;)

SCE (Error: Could not execute com.sap.sec.kbmt.createtable : )

Hi,
we are working on Configurable Material in ECC 6.0( SP010 and wanted to transfer into CRM7.0.
Knowledge base object has been created and its consistent O.K.
When i am trying install SCE Database Scheme ,i am getting the Following error ( "Error: Could not execute com.sap.sec.kbmt.createtable : The system cannot find the file specified").
we have created Database in MS-ACCESS in local system ( in my PC)
i can able to see version in CRM product master In T.Code: COMMPR01 ->Material-->Product no. Configurable tab .
Hence i request you all could you please help me in resolving my issue
Thanks and regards
Namitha Verma

Thanks

Log Reader Agent Errors

On a server with 4 merge publications I'm getting errors from a Log Reader Agent.
From documentations it seems to me that Log Reader Agent must be present only if there are some transactional publication, so I think that errors depends on this.
Probably the Log Reader Agent was created some time ago with a transactional publication that no longer exists.
So my question is: can I remove the Log Reader Agent?
To remove it can I simply remove the associated job?
The error are all like this:
The process could not execute 'sp_repldone/sp_replcounters' on 'GEREONTK'. (Source: MSSQL_REPL, Error number: MSSQL_REPL20011)
Get help: http://help/MSSQL_REPL20011
Unable to execute procedure. The database is not published. Execute the procedure in a database that is published for replication. (Source: MSSQLServer, Error number: 18757)
Get help: http://help/18757
The process could not set the last distributed transaction. (Source: MSSQL_REPL, Error number: MSSQL_REPL22017)
Get help: http://help/MSSQL_REPL22017
Thanks,
Roberto

There's no more transactional replication on database but still exists two merge replications on some tables of the same db (publication Gereon and GereonPortfoliosAll).
So I've no replication to drop but only a Log Reader Agent that seems to be a survivor from a previous transactional pubblication.
In these day I've stopped the job related to the Log Reader Agent, and merge replication are working right. So I think I can remove this Agent from the server.
In
Log Reader Agent definition on MSDN I've found "The Replication Log Reader Agent is an executable that monitors the transaction log of each database
configured for transactional replication and copies the transactions marked for replication from the transaction log into the distribution database." so it seems to me that is not related to merge replication and it safe to be removed.
Thanks

Log Reader Agent is not able to read Transaction Log of Publisher database.

Hi,
There is no restore or change in recovery model or detach-attach action performed on my production database but still I am seeing below error message from Log Reader Agent-
Error messages:
The process could not execute 'sp_repldone/sp_replcounters' on 'ProdInstance'. (Source: MSSQL_REPL, Error number: MSSQL_REPL20011)
Get help:
An error occurred while processing the log for database 'MyDatabase'. If possible, restore from backup. If a backup is not available, it might be necessary to rebuild the log. (Source: MSSQLServer, Error number: 9004)
The process could not set the last distributed transaction. (Source: MSSQL_REPL, Error number: MSSQL_REPL22017)
Get help: The process could not execute 'sp_repldone/sp_replcounters' on 'ProdInstance'. (Source: MSSQL_REPL, Error number: MSSQL_REPL22037)
Note- CheckDB on production and distribution database executed successfully. Also, I need subscriber to be a true copy of publisher so I think sp_replrestart is not an option for me.
My question is how to resolve this issue? I am thinking that reinitialization should resolve the problem but what if this is not going to resolve? Do I need to reconfigure the transaction replication? Please sugegst.

Hi,
Please check out this link on how to resolve “The process could not execute 'sp_repldone/sp_replcounters'” error.
http://blogs.msdn.com/b/repltalk/archive/2010/02/19/the-process-could-not-execute-sp-repldone-sp-replcounters.aspx
The possible cause could be:
1.The last LSN in Transaction Log is less than what the LSN Log Reader is trying to find. An old backup may have been restored on top of Published Database. After the restore, the new Transaction Log doesn't contain the data now distributor & subscriber(s)
have.
2.Database corruption.
Since you have not restored the published database, I suggest you run
DBCC CHECKDB to confirm the consistency of the database. Refer to the How to fix in the above link.
Thanks.
Tracy Cai
TechNet Community Support

Log Reader Agent: transaction log file scan and failure to construct a replicated command

I encountered the following error message related to Log Reader job generated as part of transactional replication setup on publisher. As a result of this error, none of the transactions propagated from publisher to any of its subscribers.
Error Message
2008-02-12 13:06:57.765 Status: 4, code: 22043, text: 'The Log Reader Agent is scanning the transaction log for commands to be replicated. Approximately 24500000 log records have been scanned in pass # 1, 68847 of which were marked for replication, elapsed time 66018 (ms).'.
2008-02-12 13:06:57.843 Status: 0, code: 20011, text: 'The process could not execute 'sp_replcmds' on ServerName.'.
2008-02-12 13:06:57.843 Status: 0, code: 18805, text: 'The Log Reader Agent failed to construct a replicated command from log sequence number (LSN) {00065e22:0002e3d0:0006}. Back up the publication database and contact Customer Support Services.'.
2008-02-12 13:06:57.843 Status: 0, code: 22037, text: 'The process could not execute 'sp_replcmds' on 'ServerName'.'.
Replication agent job kept trying after specified intervals and kept failing with that message.
Investigation
I could clearly see there were transactions waiting to be delilvered to subscribers from the followings:
SELECT * FROM dbo.MSrepl_transactions -- 1162
SELECT * FROM dbo.MSrepl_commands -- 821922
The following steps were taken to further investigate the problem. They further confirmed how transactions were in queue waiting to be delivered to distribution database
-- Returns the commands for transactions marked for replication
EXEC sp_replcmds
-- Returns a result set of all the transactions in the publication database transaction log that are marked for replication but have not been marked as distributed.
EXEC sp_repltrans
-- Returns the commands for transactions marked for replication in readable format
EXEC sp_replshowcmds
Resolution
Taking a backup as suggested in message wouldn't resolve the issue. None of the commands retrieved from sp_browserreplcmds with mentioned LSN in message had no syntactic problems either.
exec sp_browsereplcmds @xact_seqno_start = '0x00065e220002e3d00006'
In a desperate attempt to resolve the problem, I decided to drop all subscriptions. To my surprise Log Reader kept failing with same error again. I thought having no subscription for publications log reader agent would have no reason to scan publisher's transaction log. But obviously I was wrong. Even adding new log reader using sp_addLogreader_agent after deleting the old one would not be any help. Restart of server couldn't do much good either.
EXEC sp_addlogreader_agent
@job_login = 'LoginName',
@job_password = 'Password',
@publisher_security_mode = 1;
When nothing else worked for me, I decided to give it a try to the following procedures reserved for troubleshooting replication
--Updates the record that identifies the last distributed transaction of the server
EXEC sp_repldone @xactid = NULL, @xact_segno = NULL, @numtrans = 0, @time = 0, @reset = 1
-- Flushes the article cache
EXEC sp_replflush
Bingo !
Log reader agent managed to start successfully this time. I wish if I could have used both commands before I decided to drop subscriptions. It would have saved me considerable effort and time spent re-doing subscriptions.
Question
Even though I managed to resolve the error and have replication funtioning again but I think there might have been some better solution and I would appreciate if you could provide me some feedback and propose your approach to resolve the problem.

Hi Hilary,
Will the below truncate the log file marked for replication, is there any data loss, when we execute this command, can you please help me understand, the internal working of this command.
EXEC sp_repldone @xactid = NULL, @xact_segno = NULL, @numtrans = 0, @time = 0, @reset = 1

SQLGrammarException: could not execute query

Hello,
I created a table with the script belove in a Derby database and created Entity Class for that.
create table "BAHADIR"."User"
     "id" NUMERIC(5) not null primary key,
     "name" VARCHAR(25),
     "email" VARCHAR(100),
     "password" VARCHAR(25),
     "role" VARCHAR(25)
)In my controller class there's a method like that:
    public int getItemCount() {
        EntityManager em = getEntityManager();
        try{
            int count = ((Long) em.createQuery("select count(o) from User as o").getSingleResult()).intValue();
            return count;
        } finally {
            em.close();
    }When this method is called I get that exception stack:
HTTP Status 500 -
type Exception report
message
descriptionThe server encountered an internal error () that prevented it from fulfilling this request.
exception
javax.servlet.ServletException: javax.persistence.PersistenceException: org.hibernate.exception.SQLGrammarException: could not execute query
root cause
javax.el.ELException: javax.persistence.PersistenceException: org.hibernate.exception.SQLGrammarException: could not execute query
root cause
javax.persistence.PersistenceException: org.hibernate.exception.SQLGrammarException: could not execute query
root cause
org.hibernate.exception.SQLGrammarException: could not execute query
root cause
java.sql.SQLSyntaxErrorException: Syntax error: Encountered "User" at line 1, column 42.
root cause
org.apache.derby.client.am.SqlException: Syntax error: Encountered "User" at line 1, column 42.
note The full stack traces of the exception and its root causes are available in the Sun Java System Application Server 9.1 logs.
Sun Java System Application Server 9.1
What does these mean? The IDE created the access method automatically, so it can not be wrong. So where's the error?
Thanks.

By fixing the HQL query that results in the query that is wrong. So step 1: trace down which HQL query is causing the misery. Step 2: turn on SQL logging to see which sql is generated for that HQL query. Step 3: figure out what is wrong. I can guess that there is something wrong with the annotations on an entity, like declaring something as nullable while it is in fact not according to the database schema. Another common culprit is using a name that is a reserved SQL keyword.
EDIT:
'from limit And the keyword name clash is the cause here. Limit is an SQL keyword in MySQL, so you can't use that as a table name.

Could not execute the job

Hi,
when i execute the job a a window appear with the massage" ERROR: could not execute the job .Error returned was 1
     MESSAGE is : Could not open command file...
And i can't find from where it comes any suggestion?

When today i execute the job i had this list of error
13860    15384    REP-100109        27/05/2014 08:22:10       |Session TF_SGFA
13860    15384    REP-100109        27/05/2014 08:22:10       Cannot save <History info> into the repository. Additional database information: <SQL submitted to ODBC data source
13860    15384    REP-100109        27/05/2014 08:22:10       <SIGSIRDDB01\SQLSIRDBD> resulted in error <[Microsoft][ODBC SQL Server Driver][SQL Server]Could not allocate space for object
13860    15384    REP-100109        27/05/2014 08:22:10       'dbo.AL_HISTORY_INFO' in database 'DS_REP' because the 'PRIMARY' filegroup is full. Create disk space by deleting unneeded
13860    15384    REP-100109        27/05/2014 08:22:10       files, dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files
13860    15384    REP-100109        27/05/2014 08:22:10       in the filegroup.>. The SQL submitted is <INSERT INTO "AL_HISTORY_INFO" ("OBJECT_KEY", "NAME", "VALUE", "NORM_NAME",
13860    15384    REP-100109        27/05/2014 08:22:10       "NORM_VALUE") VALUES (430, N'TRACE_LOG_INFO',
13860    15384    REP-100109        27/05/2014 08:22:10                N'F:\SAPDS/log/JobServDS/sigsirddb01_sqlsirdbd_ds_rep_dsuser/trace_05_27_2014_08_22_09_10__3a4327b0_92c8_4abe_ac24_96d49123242a.
13860    15384    REP-100109        27/05/2014 08:22:10       txt', N'TRACE_LOG_INFO',
13860    15384    REP-100109        27/05/2014 08:22:10                N'F:\SAPDS/LOG/JOBSERVDS/SIGSIRDDB01_SQLSIRDBD_DS_REP_DSUSER/TRACE_05_27_2014_08_22_09_10__3A4327B0_92C8_4ABE_AC24_96D49123242A.
13860    15384    REP-100109        27/05/2014 08:22:10       TXT') >.>.
13860    15384    REP-100112        27/05/2014 08:22:10       |Session TF_SGFA
13860    15384    REP-100112        27/05/2014 08:22:10       Cannot save <History info> for repository object <>. Additional database information: <Cannot save <History info> into the
13860    15384    REP-100112        27/05/2014 08:22:10       repository. Additional database information: <SQL submitted to ODBC data source <SIGSIRDDB01\SQLSIRDBD> resulted in error
13860    15384    REP-100112        27/05/2014 08:22:10       <[Microsoft][ODBC SQL Server Driver][SQL Server]Could not allocate space for object 'dbo.AL_HISTORY_INFO' in database 'DS_REP'
13860    15384    REP-100112        27/05/2014 08:22:10       because the 'PRIMARY' filegroup is full. Create disk space by deleting unneeded files, dropping objects in the filegroup,
13860    15384    REP-100112        27/05/2014 08:22:10       adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup.>. The SQL submitted is
13860    15384    REP-100112        27/05/2014 08:22:10       <INSERT INTO "AL_HISTORY_INFO" ("OBJECT_KEY", "NAME", "VALUE", "NORM_NAME", "NORM_VALUE") VALUES (430, N'TRACE_LOG_INFO',
13860    15384    REP-100112        27/05/2014 08:22:10                N'F:\SAPDS/log/JobServDS/sigsirddb01_sqlsirdbd_ds_rep_dsuser/trace_05_27_2014_08_22_09_10__3a4327b0_92c8_4abe_ac24_96d49123242a.
13860    15384    REP-100112        27/05/2014 08:22:10       txt', N'TRACE_LOG_INFO',
13860    15384    REP-100112        27/05/2014 08:22:10                N'F:\SAPDS/LOG/JOBSERVDS/SIGSIRDDB01_SQLSIRDBD_DS_REP_DSUSER/TRACE_05_27_2014_08_22_09_10__3A4327B0_92C8_4ABE_AC24_96D49123242A.
13860    15384    REP-100112        27/05/2014 08:22:10       TXT') >.>.>.
13860    15384    REP-100112        27/05/2014 08:22:10       |Session TF_SGFA
13860    15384    REP-100112        27/05/2014 08:22:10       Cannot save <History info> for repository object <>. Additional database information: <Cannot save <History info> into the
13860    15384    REP-100112        27/05/2014 08:22:10       repository. Additional database information: <SQL submitted to ODBC data source <SIGSIRDDB01\SQLSIRDBD> resulted in error
13860    15384    REP-100112        27/05/2014 08:22:10       <[Microsoft][ODBC SQL Server Driver][SQL Server]Could not allocate space for object 'dbo.AL_HISTORY_INFO' in database 'DS_REP'
13860    15384    REP-100112        27/05/2014 08:22:10       because the 'PRIMARY' filegroup is full. Create disk space by deleting unneeded files, dropping objects in the filegroup,
13860    15384    REP-100112        27/05/2014 08:22:10       adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup.>. The SQL submitted is
13860    15384    REP-100112        27/05/2014 08:22:10       <INSERT INTO "AL_HISTORY_INFO" ("OBJECT_KEY", "NAME", "VALUE", "NORM_NAME", "NORM_VALUE") VALUES (430, N'TRACE_LOG_INFO',
13860    15384    REP-100112        27/05/2014 08:22:10                N'F:\SAPDS/log/JobServDS/sigsirddb01_sqlsirdbd_ds_rep_dsuser/trace_05_27_2014_08_22_09_10__3a4327b0_92c8_4abe_ac24_96d49123242a.
13860    15384    REP-100112        27/05/2014 08:22:10       txt', N'TRACE_LOG_INFO',
13860    15384    REP-100112        27/05/2014 08:22:10                N'F:\SAPDS/LOG/JOBSERVDS/SIGSIRDDB01_SQLSIRDBD_DS_REP_DSUSER/TRACE_05_27_2014_08_22_09_10__3A4327B0_92C8_4ABE_AC24_96D49123242A.
13860    15384    REP-100112        27/05/2014 08:22:10       TXT') >.>.>.
and thank u.
Sincerly

Could Not execute auto Check for DISPLAY

Aloha!
I'am about to install 11g R2 on OLE5 and i set the display variable using "DISPLAY=<machine-name>:0.0; export DISPLAY". Upon installation " ./runInstaller " im having this error "Could not execute auto check for display..."
Can i undo the command mention above?
Thanks for the help.
hades

Aloha!
"2. echo $DISPLAY << what it returns?"
value is 0.0
Having the same error..or i can still continue with the installation?
[oracle@ole5 database]$ ./runInstaller
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 80 MB. Actual 34646 MB Passed
Checking swap space: must be greater than 150 MB. Actual 5087 MB Passed
Checking monitor: must be configured to display at least 256 colors
>>> Could not execute auto check for display colors using command /usr/bin/xdpyinfo. Check if the DISPLAY variable is set. Failed <<<<
Some requirement checks failed. You must fulfill these requirements before
continuing with the installation,
Continue? (y/n) [n]
Thanks,
Hades

Preferences Error - Could not load Network

My dad just bought me a (used)) iBook g4 to replace my old one. It's running 10.3.9. It didn't come with a wireless card, so I ordered an Airport Extreme and installed it. I'm pretty sure I installed it correctly, I heard all the right clicks.
It booted up afterwards and the first thing I did was to run system update and try to get everything up to date. There were a ton. After it restarted, it no longer was connecting to our wirelesss network. I tried to go to System Preferences > Network and it responds with the error message "Preferences Error - Could Not Load Network" and nothing opens. Not to mention my DVD Player no longer works!
I have no idea what's at fault here- the airport extreme card, a bad update... And no idea how to fix it! Any help would be appreciated!

That it is not recognizing the retail (thanks cornelius) Leopard DVD is a problem indeed.
It should be plugged into the mains power, as the CD/DVD drive uses a lot of power when it is spinning.
Back to your About this Mac, does it mention that your optical drive can read DVDs?
On mine this info is located down the list under ATA which will have mentioned, CD
and in detail in the lower window
eg. Drive type: CD - RW/ DVD - ROM
if it shows the DVD-ROM part, that indicates it can read DVDs.
If it should be able to, then I wonder if the iBook's optical drive is OK. I could suggest loading another DVD into it, but you say DVD Player.app is missing.
What you could try is buying from a computer shop a CD drive cleaning kit, and following the instructions, run that through it. That is a fairy inexpensive exercise.
If it still does not recognize the DVD, and you had another Mac that you could connect by Firewire Target Disk mode, you could try installing leopard on it that way. But before that rather complex arrangement, try the disk cleaner. It might be a quick fix.

I was updating my iphone4 and it got to the end and said error could not update and now my phone is frozen on the apple start screen???

I was udating my iphone 4 software on itunes, it got all the way to the end, my phone switched off then it said error could not download software and now my phone is frozen on the start screen????

Unplug it and let unit go dead. Then hold your Home button down and plug the USB power cord back in. iTunes should see it and then restore.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

The process could not execute 'sp_repldone/sp_replcounters' error for Log Reader Agent and SQL Server Assertion 17066 & 3624 errors in SQL Logs

One of our SQL Server started creating SQLDUMP file and and on investigation I found the error longs are filled with Errors 3624 & 17066. There is transnational replication configured on one of the databases is the LogReader Agent is failing error "The
process could not execute 'sp_repldone/sp_replcounters' on XXXXX".
Not sure if both these Assertion & Logreader Agent errors are related. Before I remove and put the replication, I wanted to check if anyone has experienced the same issues or aware of what the cause.
***********Error messages from SQL Logs******
**Dump thread - spid = 0, EC = 0x0000000111534460
Message
A system assertion check has failed. Check the SQL Server error log for details. Typically, an assertion failure is caused by a software bug or data corruption. To check for database corruption, consider running DBCC CHECKDB. If you agreed to send dumps to
Microsoft during setup, a mini dump will be sent to Microsoft. An update might be available from Microsoft in the latest Service Pack or in a QFE from Technical Support.
Error: 3624, Severity: 20, State: 1.
SQL Server Assertion: File: <logscan.cpp>, line=2123 Failed Assertion = 'UtilDbccIsInsideDbcc () || (m_ProxyLogMgr->GetPru ()->GetStartupState () < RecoveryUnit::Recovered)'. This error may be timing-related. If the error persists after rerunning
the statement, use DBCC CHECKDB to check the database for structural integrity, or restart the server to ensure in-memory data structures are not corrupted.
Error: 17066, Severity: 16, State: 1.
External dump process return code 0x20000001.
External dump process returned no errors.
Thank you in advance.

You need to determine if this error is a transient one or a show stopper one.
It sounds like your log reader agent has crashed and can't continue.
If so your best bet is to call Microsoft CSS and open a support incident.
It also sounds like DBCC CHECKDB was running while the log reader agent crashed.
If you need to get up and running again run sp_replrestart, but then you might find that replicated commands are not picked up. You will need to run a validation to determine if you need to reinitialize the entire publication or a single article.
I have run into errors like this, but they tend to be transient, ie the log reader agent crashes, and on restart it works fine.
looking for a book on SQL Server 2008 Administration?
http://www.amazon.com/Microsoft-Server-2008-Management-Administration/dp/067233044X looking for a book on SQL Server 2008 Full-Text Search?
http://www.amazon.com/Pro-Full-Text-Search-Server-2008/dp/1430215941

Could not execute view config service request. This usually happens when an invalid view config service request is made, or when a read only Oracle Endeca Server receives a view config service request. Error message: Error applying updates: Unsupported la

Hi,
I have some data loaded into the data-domain in Endeca 3.0. When I was creating views in studio I repeatedly get this message when I say save view:
Could not execute view config service request. This usually happens when an invalid view config service request is made, or when a read only Oracle Endeca Server receives a view config service request. Error message: Error applying updates: Unsupported language ${DEFAULT_LANGUAGE}
In the workspace.prm file I have set ${DEFAULT_LANGUAGE}=en
May I know why this happening and a remedy for it. Appreciate you help.

Hi,
I have some data loaded into the data-domain in Endeca 3.0. When I was creating views in studio I repeatedly get this message when I say save view:
Could not execute view config service request. This usually happens when an invalid view config service request is made, or when a read only Oracle Endeca Server receives a view config service request. Error message: Error applying updates: Unsupported language ${DEFAULT_LANGUAGE}
In the workspace.prm file I have set ${DEFAULT_LANGUAGE}=en
May I know why this happening and a remedy for it. Appreciate you help.

Getting error : could not acquire the execute lock for workflow

This kind of an issue normally occur when you are trying to run a workflow that is currently running or in a suspeneded state. we observe this issues when we are having multiple integration services. the workflow might be running in another integration service or in a debugger session. simple solution is check if it is running or in a suspended state by debugger or in another service. if yes stop it and restart the workflow ThanksHijesh

Hi All, I made changes in source from oracle datatype to flat datatype then i changed again to oracle datatype.after that i tried to execute the task,i couldnt execute,below error shown. Error : could not acquire the execute lock for workflow.please check the Integartion log for more information. Note: other sessions also get changed. how do i execute this workflow with out any changes in session. please let me know. Thanks,Kate.

ERROR:Could not read archive file - during Processing Base System Part 2

Hi there,
What I have:
* I have problem with installation of the Mac OS X Panther v10.3 on iMac.
* I have 3 original CDs (black with silver X).
What I did:
* I made new 1 partition and formated disk as Mac OS Extended (Journaled) over the Disk Utility in the first CD as normal without additional options (if I tried to format disk with zero all data and 8 way random write format after 3 days computer freeze)
* I verified disk over this utility - that was ok - HFS volume verifed.
* Then I restarted the computer and ran installation from this first CD
What happened:
* installation did not finish, because there were some problems during installation process.
* i tried to customize installation just for essential work (without other languages support, printers etc), but it was still the same problem
Installation log:
After I choosed installation type, there was first error, but it did not look like important.. - root: bootstraplookup(): unknown error code
Checking your installation disk - OK
Preparing disk - OK
Preparing base 1 and 2 - OK
Other preparing.. - OK
Processing Base System Part 1 - OK
Processing Base System Part 2
==
ERROR:Could not read archive file. - pax: Invalid header, starting valid header search.
ERROR:Could not read archive file. - pax: Invalid header, starting valid header search.
last message repeated 2 times
ERROR:Could not write file. - pax: WARNING! These patterns were not matched:
Some files for Essentials may not have been writen correctly.
root: Installer[108] Exception raised during posting of notification. Ignored. exception: Some files for Essentials may not have been written correctly. (code 1)
Install Failed
Error detected
Name: NSGenericException
Reason: Some files for Essentials may not nave been written correctly. (code 1)
==
It seems like a problem with reading some data from the CD, but during the installation checking of disk was ok.. maybe it can be problem with the cd-rom..? Or problem with data on cd-rom - I mean bad archive file..? But it is original CD.. What do you think??
Thank you!

Tomas,
On THIS Page, locate your iMac model.
From the Documents column, click on the appropriate number link.
Using the info in the document that opens, locate the serial number of your iMac.
On THIS Page, in the text field for Search Tech Specs, enter that serial number.
Click on the model of iMac that appears.
Post a link to the page that opens, or post the info requested below.
Exactly which model iMac is it?
What is the Processor speed?
What size is the Hard Drive?
How much Memory is installed?
What type of internal Optical Drive does it have?
Which version of OS, was the original Installed Software?
ali b

Log Reader Agent error "could not execute sp_replcmds' and causes stack dump

Similar Messages

Maybe you are looking for