SSO for MS outlook, OWA and Sharepoint using SSO 2.0

Hi,
We have installed the secure login server 2.0. And configured SSO for SAP (ABAP, JAVA) systems using X.509 certificate. it is working fine.
We want to configure SSO for some non SAP applications like MS outlook, Outlook Web Access, Sharepoint.
I dont see any documentation in the implememntation guide of NW SSO 2.0 for how to configure these non sap applications to accept X.509 certificates.
Anyone please share the details of how to configure SSO for MS outlook, OWA and Sharepoint
Regards,
Yogesh Kumar D

Hello Yogesh,
Secure Login Server generates short lived certificates, this means after a configured time (or even
after an logout, because the Secure Login Client does not persist the private
keys in the file system) the private key and certificate is gone.
So using this for long term encryption is not practicable (because decryption
will be very very hard after a certificate/key renew...)
For a signature only solution the problem would be the signature validation, because it needs the
public key/certificate from the signer. This is usually included into the
PKCS#7 signature format, but its not guaranteed (depends on the application settings as example in outlook etc.). So this would be theoretically possible, but unlikely.
For long term encryption/signatures you need persistence certifkate/keys.
So thats the reason there is not documentation about that use case in Secure Login Server.
best regards
Alex

Similar Messages

Write code for authentication of username and password using struts

write code for authentication of username and password using session using struts with jdbc connection..

write code for authentication of username and
password using session using struts with jdbc
connection..and please, allow me to spoon feed you!

Can I download a trial version for acrobat pro 11, and then use purchased license to register it?

as the title: can I download a trial version for acrobat pro 11, and then use purchased license to register it?

You should find the licensing info and download at https://licensing.adobe.com/ then.

How do I configure itunes to look for my Outlook contacts and calendar?

Being fairly new with the iPhone, how do I configure itunes to look for my Outlook contacts and calendar? At the moment,when I try to sync, I get the "No supported calendar application can be found" message. Thanks!

You could try uninstalling iTunes and all of its components as by following this guide: http://support.apple.com/kb/HT1923, then reinstalling iTunes. This will replace a potentially corrupt Outlook plugin. You must follow this guide exactly or it will not be successful. Note: uninstalling iTunes will only remove the application; it will not touch your iTunes library or data.

Hi, i want to buy iphone 5s silver and iphone 5s gold both with T-mobile nano card. Is Iphone 5s unlocked? if i will bel for example in Ukraine and will use the ukrainian nano card will it work there?

hi, i want to buy iphone 5s silver and iphone 5s gold both with T-mobile nano card. Is Iphone 5s unlocked? if i will bel for example in Ukraine and will use the ukrainian nano card will it work there?

Apple does not unlock iPhones. however, T-Mobile, where you live does offer official unlocking. So, contact them as to the cost/requirements.

How do we use SSO for both Windows AD and Trusted authentication?

We want to have the majority of our users access the BO 4 BI Launchpad using SSO with Windows AD authentication. We have set this up and it's working ok. We also have a subset of external users and need to configure SSO with Trusted authentication for their Enterprise accounts. Support says we can only have SSO for one authentication type. I'm assuming we can work around this by installing a 2nd Tomcat instance on our Linux server. Has anyone done this type of config successfully? Any other ideas would be greatly appreciated. Thanks!

Hi Collins,
BOE's CMS can be accessed from multiple application servers.
Please have a look on this new article [here|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/00240702-8343-2f10-ed9a-85ece14c93db] .
You may use this method for other application servers(not only NW) but just dont add the file "web-j2ee-engine.xml" as its not needed.
regarding sections 4.2.4 on the document, On one application server just set "authentication.default" property under the file BIlaunchpad.properties, to "secWinAD"(for win AD). and on the other set it to "secEnterprise".
please report any problems you may encounter,
thanks,
Idan

SSO for prompts with Crystal and BW in BO XI 3.1 SP3

Hello together,
i have a question regarding Crystal and SSO based on a Bex Query.
I created a Crystal report based on a Bex Query.
Saved this to BW und published it with the BW Publisher to BOE (SAP Int. Kit is installed).
In the Cmc i set the report to SSO for prompts.
I logon to BOE with my SAP User and Password.
Try to run the Crystal.
Unfortunately it does not work, i get an logon error message for the Database.
Can somebody help me why this happen?
Thx a lot
Br
Mike

Hi Ingo,
sorry for my late response, i had no chance to access the system.
It is no error, it is just the Database Logon
"The report you requested requires further information."
But how can i avoid this Logon und use SSO?
Thanks a lot for your help.
Best Regards
Mike

How do I unverify an alternate email for one Apple ID and then use it for another Apple ID?

So I need to use my email address for another Apple ID and when I enter it, it says that its already verified when I deleted it from my other Apple ID. Does anyone know how I unverify that email address???? Please help!!!

Hey, try these steps:
Go to My Apple ID.
Select Manage your Apple ID and sign in.
Scroll down to check if there are alternate and additional email addresses
Delete or remove those email addresses
Hope this helps.

Im in maldives and i been using the singapore store for a long time. and i used my credit card issued in maldives but with a singapore store and its been working well until one day my card expired and i reissued a new card. a different security number onl

i been using the singapore app store for a long time. and my credit card is issued in maldives and it was working well until one day my card got expired so i reissued it again here in maldives.and i was updates my payment methid only my having a new security number.and yet there came an error msg saying my payment is not valid.so now i cant buy any apps
so please help me out.

so adjust your iTunes account settings to reflect the new card...

Process for exporting in FCPX and then using MPEG Streamclip to downgrade?

I have footage shot with a 5Diii, and it is set at 1920x1080, 23.98p.
When I export through FCPX at H.264, it gives me a beautiful master file, but is larger than the 4GB that I need.
What is the process for using MPEG Streamclip to get a smaller file?
Do I export a master file in FCPX first using a different codec, and then use MPEG Streamclip to compress it? If so, what would be the best setting to export from FCPX, and then what would be the best setting to compress at in MPEG streamclip?
My goal is to be as close to 1080HD as possible.

Here is the background story....... I provide movie files on a DVD delivery (files in SD quality) and then also give a copy of the same films on a flash drive so clients can have it in HD quality, and plug the flash drive directly into the TV.
This always worked fine in the past until I ran into a movie file that is 4.7GB, and would not copy onto the flash drive, since flash drives only accept files up to 4GB.
So I tried reformating the flashdrive to exFAT. It allowed me to copy the 4.7GB on the flashdrive, but when I tried plugging it in directly to the TV, the TV did not recognize the drive. (I learned that exFAT is not always compatable with all TVs.)
My other option would be to download an app to let me reformat the drive into NTFS which accepts files bigger than 4GB, and supposedly works better with TVs. I haven't tried this yet because I am worried that downloading that app might mess up my computer. ???????
So....I have come to the conclusion that the only other thing I can do is compress the 4.7GB file to be 4GB (or less) so it will fit on the flash drive which I believe had an original format was MS-DOS FAT.
Are you suggesting instead of exporting the file from FCPX in H264, I should do it in ProRes? The file will be much larger than 4GB, but, then I can compress it, without losing as much of the quality as I would if I compressed an H264 file? Either way it needs to be 4GB or less, so I don't know if that defeats the purpose of using a ProRes file to begin with.
Thank you so much for helping with this!

I cannot download pictures in outlook 2010 and am using firefox

Suddenly, I cannot DOWNLOAD PICTURES in my MS Outlook 2010. If I right click on the red cross and select DOWNLOAD PICTURES, it changes to a red square, green circle and blue inverted triangle. Please help. I use a 64-bit operating system : Windows 7 Ultimate. My Internet Explorer no longer works so I have set Mozilla Firefox as my default browser
<sub>edit: removed your mail address from public display, since the only thing it will attract are spam bots. you will be notified per mail once somebody replies to the thread. (philipp)</sub>

You can check for problems with DDE.
*http://kb.mozillazine.org/Windows_error_opening_Internet_shortcut_or_local_HTML_file_-_Firefox
Try to redo the default browser setting and temporarily set another browser like IE as the default browser.
*http://kb.mozillazine.org/Default_browser
*https://support.mozilla.org/kb/How+to+make+Firefox+the+default+browser
*https://support.mozilla.org/kb/Setting+Firefox+as+the+default+browser+does+not+work

Found a fix for printing from Mac and PC using Airport Express!

I hope this helps somebody else because it's taken me hours and hours of frustration to trip over this solution. I have a MacBook, Airport Express and a Windows XP PC. Internet worked fine but I could not print form the PC via airport. I tied all the various links from iFelix (thanks to him for what sure seems like a lot of work to help others) but they didn't work. Here's what did...
To setup a printer using the Bonjour Printer Wizard:
1. Download the Bonjour for Windows installation package from the
Apple site http://www.apple.com/macosx/features/bonjour/.
2. Install Bonjour for Windows by launching the BonjourSetup.exe file from the folder where place it was downloaded.
3. Start the Bonjour Printer Wizard either by clicking its icon on the desktop or by selecting Start -> Programs -> Bonjour -> Bonjour Printer Wizard.
4. Follow the installation steps until the Install Bonjour Printer screen appears.
5. In the Install Bonjour Printer screen, select Generic in the Manufacturer list and then Generic / Postscript in the Model list. This step is the same for any printer model you have.
6. Follow the rest of installation steps.
The key is the Generic and Generic/Postscript settings. I also set up the Parallels program on my Mac. These instructions come from their documentation. It's the only thing I've found that works. Hope it helps some of you!

Printing from a Windows XP PC to a printer attached to an Airport Extreme Base Station or Airport Express
http://tech.ifelix.net/1004.html
Printing from a Windows XP PC to a printer attached to an Airport Extreme Base Station or Airport Express using Bonjour
http://tech.ifelix.net/1008.html
Problems with finding Printer Driver on Windows XP when using printer connected to Airport Extreme or Express
http://tech.ifelix.net/1012.html

Detect what the default edit form is for a document library and list using jquery

Hi,
So what I have done is with some jquery made it that when a files are dragged and dropped into a document library and there is a required field such as "Metadata" the EditForm.aspx opens up for the user to fill in the required column. I am building
the url up from what I have found in SharePoints DragDrop.js file. This is all working perfectly I just need to find a way to dynamically find what the default edit form is for that document library as I have just hardcoded like this...
g_currentControl.strSiteUrl + "/" + this.ListName + "/Forms/EditForm.aspx?ID=" + id
So I need a way to figure out what the default edit form is instead of hard coding like this in case someone creates a custom_editform.aspx or something for one of the lists.
Thanks

You can get it by hitting this REST end point via JQuery:
http://weburl/_api/Web/Lists(guid'YOURLISTGUID')/Forms
Chris Givens CEO, Architecting Connected Systems
Blog Twitter

Settings for monitoring Solaris CPU and memory using ATS serverstats

Hi,
I need to set up some monitors for a Solaris 10 server (hosting Web server for Application Under test) using OLT. Can someone please advise as to what set up I will need to access the Solaris CPU/Memory/vmstat data during the performance tests?
Do I need to install something on the server side? What user priviledge will I need to access this monitor on the Server and what ports should I open?
Regards

Hello
Nothing to install. It's completely remote using ssh or telnet. (so standard ports to consider).
You need to setup what we call a "virtual agent".
Create a "monitor" using "Virtual Agent" as a data source.
Then you need to setup your remote system and particularly to configure the prompt returned when logging in with the given user (try manually with plink first).
Then you can try predefined metrics which are not so good in my opinion. So better to create your own metrics. (find the proper unix command line to retrieve the information needed and use regular expression to get the value out of the output.
Pls first, you should update plink.exe in the c:\oracleats dir (don't remember where) by downloading a newer version on internet.
I'm sure it's not all clear, but with the documentation, google & some effort, you should find the solution.
Cheers
JB

Preview glitch when searching for words on page and when using text tools to write comments/notes on .pdf slides, why?

When using Preview to access my class notes as .pdf files, I have encountered extremely frustrating glitches when trying to search for specific words or phrases within the .pdf files and when trying to use 'text tools' to write notes on the .pdf slides. Preview did not behave in this manor with Mountain Lion OS. This seems to correlate with my recent upgrade to Mavericks OS.
When using the search function you should be able to type in any number of letters or words and press enter to continually cycle through the highlighted findings that match what you have typed in. Instead it now, typically, stops tracking what I type in after about 3-4 letters and the yellow highlight turns grey. Once it does this if you try to press enter to cycle through what it has found it no longer cycles. It never did this in Mountain Lion using the very same .pdf files I had previously used in the old OS, and it does this despite there being multiple matches for what I am searching.
When clicking 'show edit tool bar' button and then 'text tools' button to be able to free text notes on the .pdf file I have to exit out of the 'text tools' mode to be able to advance to the next page. This is extremely inconveneint and, again, Preview did not do this in Mountain Lion.
These are my two major complaints about Preview that I have discovered so far in my short time using it with the new Mavericks OS.
Any help would be very much appreciated.

I have this issue too and was pleased to find this thread. Did either of you find the source of the problem or how to fix it?
I've tried using Wondershare PDF Editor as well and wondered that had messed some settings up. Have either of you used that?
If so, how would I revert to a clean version of Preview?
Hope we can get this sorted.

SSO for MS outlook, OWA and Sharepoint using SSO 2.0

Similar Messages

Maybe you are looking for